A machine produces a larger force than you exert to operate the machine. How does this input distance of the machine compare to its output distance?
Answer:
Because the output force is greater than the input force, the input distance must be greater than the output distance.
Explanation:
1. Explain a stretching routine for your work environment. As you consider your routine, keep in mind the specific individuals within your work environment who will be using this plan. How will you account for differences in sizes, ages, and cultures?
Answer:
Explanation:
A stretching routine should target most of the main muscles in the body and at least one stretching exercise per section of the body. Also in a work environment since individual's sizes, ages, and cultures vary you should design a routine that is for beginners and very easy and effective. Regardless, each individual should be able to move at their own pace and push as far as they are physically able. One such routine would be the one in the attached picture below which targets all major areas, is easy and effective. It starts at the neck muscles and works its way down the arms, back, and legs.
A heavy log will float on water
because:
A. It is less dense than water
B. It weighs less than water
C. It is more dense than water
D. It weighs more than water
Answer:
A it is less dense than water
Explanation:
The density, of a substance is its mass per unit volume
A sound wave ________ and ______ the air molecules around your ear.
Group of answer choices
moves and shakes
compresses, expands
vibrates and heats up
Answer:
compresses and expands
Answer:
compreses and expands
Explanation:
because it is
What is the speed of a snail moving at a rate of 3 inches per minute in [m/s]? Recall that 1 [m] = 39 [in]. Round to the nearest ten thousandth (4 places after the decimal).
Answer:
0.0013 m/s
Explanation:
Speed in inches per minute = 3 inches per minute
Speed in m/s =?
Next, we shall convert 3 inches per minute (3 in/min) to metre per minute.(m/min)
39 in/min = 1 m/min
Therefore,
3 in/min = 3 in/min × 1 m/min / 39 in/min
3 in/min = 1/13 m/min
Finally, we shall convert 1/13 m/min to m/s. This can be obtained as follow:
1 m/min = 1/60 m/s
Therefore,
1/13 m/min = 1/13 m/min × 1/60 m/s / 1 m/min
1/13 m/min = 1/780 m/s
1/13 m/min = 0.0013 m/s
Thus, 3 in/min is equivalent to 0.0013 m/s.
Therefore the speed of the snail in m/s is 0.0013 m/s
The minimum resultant of two forces of 20N and 5N is:
a) 10N
b) 5N
c) 20N
d) 25N
Answer:
if it's combined forces then it would be 25N if it was an unbalanced force then it would be 15N
Power is measured in which unit?
joules
O watts
O meters per second
O newtons per meter
Answer:
Power is measured in Watts
what is the difference between a parallel connection and series connection
Answer:
here lol
Explanation:
Answer:
when the connection of the batteries is parallel negative to negative n positive to positive is called parallel connection
Explanation:
A movie director creates a scene in which people on Spaceship #1 can see approach of Spaceship #2 and hear its engines. The director
hires a scientist to review the scene.
What should the scientist tell the director?
A .The scene needs no changes because light and sound waves can both travel through space.
B. The scene needs changes because neither light waves nor sound waves can travel through space.
C. The scene needs changes because sound waves can travel through space, but light waves cannot.
D. The scene needs changes because light waves can travel through space, but sound waves cannot.
A,B,C or D plz answer !
Answer:
It is D.
Explanation:
Sound travels by the movement of particles bumping against each other and if there is no particles in a vacuum(space) then there is no sound. Light can travel through space because it doesn't need to travel by/through particles.
A mortar shell is accidentally shot straight up with an initial speed of 147 m/s. How long does it take for the shell to reach its maximum height? How high does the shell rise? If the shell falls straight down after is stops, what is its velocity when it hits the ground? What is the total time the shell is in the air?
Answer:
1) t ≈ 14.985 seconds
2) The maximum height reached ≈ 1101.4 meters
3) The velocity with which it hits the ground = 147 m/s
4) The total time in the air ≈ 29.969 seconds
Explanation:
1) The given information are;
The initial velocity of the mortar shell = 147 m/s
The direction of the mortar shell = Vertically upwards
Therefore, we have, from the equation of motion
v = u - g·t
Where;
v = The final velocity = 0 at maximum height
u = The initial velocity = 147 m/s
g = The acceleration due to gravity = 9.81 m/s²
Therefore, we have;
0 = 147 - 9.81 × t
9.81 × t = 147
t = 147/9.81 ≈ 14.985 seconds
t ≈ 14.985 seconds
2) From the equation of motion, v² = u² - 2×g×s
Where;
s = The maximum height reached
We have;
0² = 147² - 2×9.81×s
2×9.81×s = 147²
s = 147²/(2×9.81) ≈ 1101.4 meters
The maximum height reached ≈ 1101.4 meters
3) The velocity with which it hits the ground is equal to the initial velocity = 147 m/s
4) The total time in the air = 2 × The time it takes to reach maximum height
The total time in the air = 2 × 14.985 ≈ 29.969 seconds
The total time in the air ≈ 29.969 seconds
I need help lease. I will mark you brainliest
Answer: 43.5
and now I'm typing cause it said the answer had to be at least 20 characters
What is the average speed of the boat between 4 and 6 minutes?
Answer:
[tex] the \: average \: speed \: of \: the \: boat \: between \: 4 \: and \: 6 \: \\ minutes \: = \frac{1000 - 500}{6 - 4} = \frac{500}{2} = 250[/tex]
note: cant really see the measuring units for clear unit for the value, however the average speed is 250 meter/mins, from observation.
PLZ HELP SOMEONE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! what is badminton drops??????????????????????????????????????
Answer:
A drop shot is the badminton shot that you perform when you are in the back of your court and you hit the birdie so it lands in the front part of your opponent's side
Explanation:
How are gravity and air resistance alike? How are they different?
Answer:
kid
Explanation:
Find the magnitude and direction of the net gravitational force on mass A due to masses B and
C in the figure. Each mass is 2 kg.
a. 2.8x10^-8N, to the right
b. 2.54x10^-8N, to the right
c. 3.4x10^-8N, to the left
d. 3.4x10^-8N, to the right
Answer is A 2.8 x 10^-8 N, to the right
The net gravitational force on mass A due to masses B and C is required.
The correct option is a. [tex]2.8\times 10^{-8}\ \text{N}[/tex] to the right.
G = Gravitational constant = [tex]6.674\times 10^{-11}\ \text{Nm}^2/\text{kg}^2[/tex]
[tex]r_{AB}[/tex] = Distance between A and B = 0.4+0.1 = 0.5 m
[tex]r_{AC}[/tex] = Distance between A and C = 0.1 m
[tex]m_A=m_B=m_c[/tex] = Mass of each particle = 2 kg
The required force is
[tex]F_A=F_{AB}+F_{AC}\\ =\dfrac{Gm_Am_B}{r_{AB}^2}+\dfrac{Gm_Am_C}{r_{AC}^2}\\ =Gm^2\left(\dfrac{1}{r_{AB}^2}+\dfrac{1}{r_{AC}^2}\right)\\ =6.674\times 10^{-11}\times 2^2\left(\dfrac{1}{0.5^2}+\dfrac{1}{0.1^2}\right)\\ =2.8\times 10^{-8}\ \text{N}[/tex]
The magnitude of force will be [tex]2.8\times 10^{-8}\ \text{N}[/tex]
The direction will be towards the right since C is closer to A.
Learn more:
https://brainly.com/question/1835915
https://brainly.com/question/7038796
HELP ASAP am being timed will brain crown mark!
------------------------------------------------------------------------------------------------------------------------
Two descriptions about physical quantities are given below:
Quantity A: It remains constant.
Quantity B: It depends on gravitational pull.
What quantities are these most likely describing?
Both Quantity A and Quantity B are mass.
Both Quantity A and Quantity B are weight.
Quantity A is weight and Quantity B is mass.
Quantity A is mass and Quantity B is weight.
Answer:
The answer is D.
Explanation:
This is because mass always remains constant and weight is dependent on a gravitational pull.
Which best describes the definition for the atomic mass of an element?
It is a weighted average of the masses of an element’s isotopes.
It is a ratio based on the mass of the carbon-12 atom.
It is the sum of the protons and neutrons in one atom of the element.
It is twice the number of protons in one atom of the element.
Answer:
It is a weighted average of the masses of an element’s isotopes.
Explanation:
The best definition of the atom mass of an element is that it is a weighted average of the masses of an element's isotopes.
Isotopes of an element have the same electronic configuration but differ in only their masses. The atomic mass of an element can be derived from the geonormal abundances of this isotopes. It is the average of all the isotopes of an element.Atomic mass = ∑m[tex]_{i}[/tex] a[tex]_{i}[/tex]
where m[tex]_{i}[/tex] is the mass of the isotope i
a[tex]_{i}[/tex] is the abundance of the isotope i
A dolphin can swim at a constant speed of 12.5 m/s. How
long does it take a dolphin to swim 45 meters?
Answer:
[tex]\boxed {\tt 3.6 \ seconds}[/tex]
Explanation:
Time can be found by dividing the distance by the speed.
[tex]t=\frac{d}{s}[/tex]
The distance is 45 meters and the speed is 12.5 meters per second.
[tex]d= 45 \ m \\s= 12.5 \ m/s[/tex]
[tex]t=\frac{45 \ m}{12.5 \ m/s}[/tex]
Divide. Note that the meters, or "m" will cancel each other out.
[tex]t=\frac{45 }{12.5 \ s}[/tex]
[tex]t=3.6 \ s[/tex]
It will take the dolphin 3.6 seconds to swim a distance of 45 meters are 12.5 meters per second.
Answer:3.6 seconds
Explanation: 45/12.5 m/s is 3.6s
why do people have a virgna
Answer: For many things, like reproduction and releasing bad bacteria.
Explanation: We all have our parts, but what’s most important is our private parts. It helps us to use the restroom, and release the bad bacteria, without it, we’d die from holding it in! But also, it helps the world grow, because to reproduce we need those parts.
A place with a tropical climate would most likely be located (1 point)
a. near the equator
b. at high altitudes
c. near the poles
d. in the middle of a continent
Answer:
near the equator
Explanation:
the equator is at the center of both hemispheres, and gets the most direct sunlight year round. Therefore, it would be the most tropical.
A hockey puck sliding on a frozen lake comes
to rest after traveling 176 m.
If its initial velocity is 2.3 m/s, what is its
acceleration
Given parameters:
Distance traveled = 176m
Initial velocity = 2.3m/s
Unknown:
Acceleration = ?
Solution:
Acceleration is the change in velocity with time. To solve this problem, we apply one of the motion equations;
V² = U² + 2as
where V is the final velocity
U is the initial velocity
a is the acceleration
s is the distance
final velocity is 0;
0² = 2.3² + 2 x a x 176
-5.29 = 352a
a = - [tex]\frac{5.29}{352}[/tex] = - 0.015m/s²
least massive metalloid of period 4
Answer:
It is Germanium(Ge)
Explanation:
If John mows 11.5 meters of lawn from east
to west in 7.1 seconds, what is the velocity
of the lawnmower?
A. 0.6 m/s East
B. 0.6 m/s West
C. 1.6 m/s East
D. 1.6 m/s West
How far does light travel in 13 s?
Answer:
2,421,666 miles
Explanation:
light travels 186,282 miles per second in a vaccum.
So 186,282 × 13 = 2,421,666
Erica tells Michael she is 160 centimeters tall, while Michael says he is 70 inches tall. If there are 2.54 centimeters in an inch, whos taller?
Answer:
Michael
Explanation:
160cm = 62.9921 inches
70in > 63in
this is due by 11.00 pm send some help pls!!!!
Your science teacher presents you with a circuit model that contains five light bulbs, a switch, and a 1.5-volt battery. The wires of the circuit are hidden from your view so that you cannot see how the bulbs are connected to the battery. How could you determine the type of circuit used in this model?
A.
If all the bulbs are equal brightness, it is a series circuit because each bulb in a series circuit has the same resistance.
B.
If all the bulbs are equal brightness, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
C.
If you unscrew one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
D.
If you unscrew one bulb and all the others stay lit, it is a series circuit because each bulb in a series circuit have to share the same current.
Answer:
C
Explanation:
PLACING BULBS IN SERIES
Increasing the number of bulbs decreases the brightness of the bulbs.
The resistance increases. In a series circuit, adding bulbs increases the resistance in the circuit. A complete circuit requires the electrons to move from the negative terminal of the battery to the positive terminal. When one bulb is unscrewed it opens the circuit preventing a complete circuit and the electrons cannot return to the battery.
PLACING BULBS IN PARALLEL
Two bulbs in parallel are brighter than two bulbs in series. In a parallel circuit each bulb is in its own circuit. As bulbs are added the resistance in the circuit decreases since each circuit is another pathway for electrons to move from one end of the circuit to the other.
If you unscrew one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery.
What is bulbs in series combination?The brightness of the bulbs reduces as the number of bulbs increases in series. Resistance rises in intensity. Adding bulbs to a series circuit raises the circuit resistance. The electrons must pass from the battery's negative to positive terminals in order for the circuit to be complete. When one bulb is removed, the circuit is broken, making it impossible for the electrons to return to the battery.
What is bulbs in parallel combination?In comparison to two bulbs in series, two bulbs in parallel are brighter. Each bulb is in its own circuit when the circuits are parallel. As more bulbs are added, the resistance in the circuit reduces because each additional circuit provides an additional route for electrons to travel from one end to the other.
You can determine the type of circuit used in this model by unscrewing one bulb and all the others stay lit, it is a parallel circuit because each bulb in a parallel circuit has its own path to the battery. Hence, option(C) is correct.
Learn more about parallel combination here:
https://brainly.com/question/14547003
#SPJ2
The store where you work receives a shipment of stuffed animals. One box contains 48 teddy bears, and the other box has 32 stuffed dogs. Your job is to display the animals on shelves. You want to display them in rows of equal size, but you don't want to mix the teddy bears and the dogs. Use the drop-down menu to complete the statement. The greatest number of stuffed animals you can have in a row is
Answer:
16
Explanation:
The store where you work receives a shipment of stuffed animals. One box contains 48 teddy bears, and the other box has 32 stuffed dogs.
We find the factors of 32 and 48
The factors of 32 are: 1, 2, 4, 8, 16, 32
The factors of 48 are: 1, 2, 3, 4, 6, 8, 12, 16, 24, 48
The greatest common factor is 16.
Hence,
The greatest number of stuffed animals you can have in a row is 16
Calculate the work done by the cyclist when his power output is 200 W for 1800 seconds.
Answer:
3.6 × 10^5 J
Explanation:
Work Done = Energy
Energy = Power × time
Energy = 200 × 1800
= 360000 J
W =
[tex]3.6 \times 10 {}^{5} j[/tex]
Somebody plz answer these easy questions correct thx!!!
(WILL MARK BRAINLIEST)
:D
Answer:
6. Dolphins have two nasal passages
7. In a whale flipper there are:
Limbs: Cetacean flippers have the same bones as the forelimbs of other mammals. The humerus, radius, ulna, carpals, metacarpals and phalanges are all present. However, in cetaceans the radius and ulna (forearm) and humerus (upper arm) are fused.
Hope this helps! :D
Answer:
they have 2 nasal passages
What is the process called when heat is added to a liquid? What does the liquid become?
Answer:
evaporation
Explanation:
when the liquid is heated it evaporates until it becomes air