Polarized glasses reduce the glare reflected from the ocean by filtering out horizontally polarized light, allowing only vertically polarized light to pass through. This eliminates the glare, leaving a much clearer view of the ocean.
Polarized lenses are specially designed to filter out certain wavelengths of light, allowing only vertically polarized light to pass through. This eliminates glare, as glare is made up of horizontally polarized light.
To understand this better, we can look at how light reflects off the ocean. When light hits the surface of the ocean, it is reflected in all directions. This includes horizontally polarized light, which is what causes glare.
However, when light passes through polarized lenses, only vertically polarized light is allowed to pass through. This eliminates the horizontally polarized light, thereby reducing the amount of glare reflected from the ocean.
for such more question on Polarized light
https://brainly.com/question/29217577
#SPJ11
When you increased the pulley diameter in part 2 of the lab, which statement best describes what happened? A. The time for 5 revolutions decreased because the force got larger and rotational inertia stayed the same. B. The time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia decreased. C. The time for 5 revolutions decreased because the lever arm got larger, and rotational inertia stayed the same. D. The time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia increased. E. The time for 5 revolutions increased because the air resistance was less.
The statement (D) "The time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia increased." best describes what happened when the pulley diameter was increased.
Rotational inertia is the capacity of a rotating object to oppose a modification in its rotational motion. The larger the rotational inertia of an object, the more force must be added to accelerate it. Rotational inertia is determined by an object's mass distribution and the way it rotates around an axis.
In part 2 of the lab, the time for 5 revolutions increased because the torque remained unchanged, but the rotational inertia increased. When the pulley diameter increased, the pulley's moment of inertia increased as well, implying that the rotational inertia of the system increased. As a result, more torque was required to rotate the pulley, and the time for 5 revolutions also increased.
Learn more about pulley: https://brainly.com/question/1303344
#SPJ11
how would you describe the direction of the electric fields for all the points with one simple statement?
The direction of the electric fields for all the points can be described with one simple statement that states "Electric fields flow from the point of the positive charge to the point of the negative charge".
Positive charges generate electric fields that travel outward from their positions. Negative charges generate electric fields that travel inwards toward their positions. Electric fields are invisible and have no mass or charge.
The direction of the electric field is always perpendicular to the equipotential lines, indicating the direction of the force acting on the charge. When two charges are placed near each other, they will create electric fields. The electric fields will interact with each other, and the resulting force is a product of the interaction of the electric fields.
The electric field generated by the negative charge flows towards the positive charge. The electric field generated by the positive charge flows away from the positive charge.
To know more about electric fields refer here:
https://brainly.com/question/8971780#
#SPJ11
Below are eight crates of different mass.(Figure 1) The crates are attached to massless ropes, as indicated in the picture, where the ropes are marked by letters. Each crate is being pulled to the right at the same constant speed. The coefficient of kinetic friction between each crate and the surface on which it slides is the same for all eight crates. Rank the ropes on the basis of the force each exerts on the crate immediately to its left. Rank from largest to smallest. To rank items as equivalent, overlap them
The ranking of the ropes on the basis of the force each exerts on the crate immediately to its left, from largest to smallest, is as follows:
F > A > D > B > E > H > G > C
Rope F exerts the largest force on the crate immediately to its left because it is attached to the crate with the largest mass. The force exerted by each subsequent rope on the crate immediately to its left decreases because the mass of the crates to their left decreases. Therefore, rope A exerts the second-largest force, followed by D, B, E, H, G, and C.
What is force?
Force is a physical quantity that describes the interaction between two objects or systems. It is defined as any influence that can cause an object to undergo a change in motion or shape.
Force can be represented as a vector, which means that it has both magnitude and direction. The standard unit of force is the newton (N) in the International System of Units (SI).
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ1
a rock is thrown upward with a velocity of 12 meters per second from the top of a 42 meter high cliff, and it misses the cliff on the way back down. when will the rock be 12 meters from ground level?
The rock will be 12 meters from the ground level after it has been thrown upward with a velocity of 12 meters per second from the top of the 42 meter high cliff for a total of 3.5 seconds.
What is the cliff?The cliff is the height that generally has the highest height and it can be mountains, stones, buildings.
This is because the total time taken for the rock to fall back down will be the same as the total time taken for the rock to reach the top of the cliff. The equation used to calculate this is: time = distance / velocity. Therefore:
Time = 42 meters (cliff height) / 12 meters per second (velocity) = 3.5 seconds.
So, the rock will be 12 meters from the ground level after 3.5 seconds.
Read more about cliff here:
https://brainly.com/question/22789028
#SPJ11
a thin spherical metallic shell of radius 2.31 cm is has a charge of -3.1 uc uniformly distributed on its surface. what direction does the electric field point at a distance of 4.2 cm from the origin? a. there is no electric field b. radially outward c. tangential to the surface d. radially inward
The electric field's direction is radially inward because the charge is negative. Hence, the correct option is (d)
The given electric charge is -3.1uc, uniformly distributed over a thin spherical metallic shell with a radius of 2.31cm.
The electric field direction at a distance of 4.2cm from the origin can be found using Gauss's law.
The electric field is proportional to the electric charge enclosed by the spherical metallic shell within a closed surface.
The electric flux is defined as the electric field passing through the closed surface divided by the electric field.
For instance, The electric flux through a closed surface is proportional to the electric charge enclosed by that surface.
E is the electric field,
ΦE is the electric flux, and
Qenc is the electric charge enclosed by the surface in Gauss's law.
Here, the Gaussian surface is a sphere with a radius of 4.2cm.
We can calculate the electric field direction using the same formula as before, which is given by;
E = Qenc/4πε0r², where r = 4.2cm
Let's substitute the values and simplify = (-3.1 x 10⁻⁶)/(4π x 8.85 x 10⁻¹² x (4.2 x 10⁻²)²)E = -5.82 x 10⁴ N/C
Therefore, radially inward. The electric field is a vector field that exists around charged objects.
The field is proportional to the charge and inversely proportional to the distance between the charges.
A positive charge will emit electric field lines, whereas a negative charge will attract them. The electric field is represented by the letter E and is calculated in units of newtons per coulomb (N/C).
To learn more about the electric field:https://brainly.com/question/19878202
#SPJ11
a bar magnet falls under the influence of gravity along the axis of a long copper tube. if air resistance is negligible, will there be a force to oppose the descent of the magnet? if so, will the magnet reach a terminal velocity? explain.
A bar magnet falls under the influence of gravity along the axis of a long copper tube. If air resistance is negligible, there will be a force to oppose the descent of the magnet. The magnet will reach a terminal velocity. Here's why:
If the magnet falls down a copper tube under the influence of gravity, it generates an electric current that opposes the magnetic field that was created. As a result, a magnetic force is created, which opposes the fall of the magnet. As a result, there is a force opposing the descent of the magnet.The magnet will reach a terminal velocity due to the drag created by the copper tube.
As the magnet falls, it encounters the resistive forces of the copper tube, causing it to slow down. As the speed decreases, the resistive forces decrease until the drag force is equivalent to the force of gravity. The magnet then reaches a steady state called the terminal velocity. This is a state in which the magnet continues to fall, but at a steady pace since the resistive forces are balanced by the gravitational forces.
Learn more about magnetic force: https://brainly.com/question/29252577
#SPJ11
which measurement is the most accurate measure of the density of platinum?
The most accurate measure of the density of platinum would be obtained through the measurement of its mass and volume, and then calculating its density using the formula: Density = Mass / Volume.
Platinum's density can be determined most precisely by measuring its mass and volume, then applying the formula Density = Mass / Volume to determine both of those quantities. It is crucial to employ the most precise and accurate tools available to guarantee the highest level of accuracy in these measurements. Accurate measurements could be taken using the following methods: Calculate the platinum sample's mass using an analytical balance that has a high degree of accuracy. To prevent any loss or contamination, the balance should be calibrated before use, and the sample should be handled carefully. The volume of the platinum sample should be measured using a method like water displacement or a volumetric flask.
Learn more about measure here:
https://brainly.com/question/4725561
#SPJ4
which of the four maxwell equations explains how a magnetic stripe credit card reader works? group of answer choices gauss's law for electric fields. gauss's law for magnetic fields. ampere's law. faraday's law.
The Maxwell equation that explains how a magnetic stripe credit card reader works is Faraday's law.
Faraday's law states that a changing magnetic field will induce an electromotive force (EMF) in a conductor. In a magnetic stripe credit card, the stripe contains small magnetic particles that are arranged in a particular pattern.
As the card is swiped through the reader, the magnetic field in the reader's head changes, causing a corresponding change in the magnetic field of the stripe. This change in magnetic field induces an EMF in the conductor, which is then read by the reader and used to extract information from the card.
For more similar questions on magnetic field:
brainly.com/question/14411049
#SPJ11
Based on what we know about our own solar system, the discovery of hot Jupiters came as a surprise to scientists because these planets are_______View Available Hint(s) O so close to their stars O made of different materials than either the terrestrial or jovian planets in our solar system O so largeO so small
Hot Jupiters came as a surprise to scientists because these planets are so close to their stars. Hot Jupiters orbit much closer to their stars than the terrestrial and jovian planets in our solar system. Despite their close proximity to their stars, these planets are still relatively large compared to the other planets in their systems.
Based on what we know about our own solar system, the discovery of hot Jupiter came as a surprise to scientists because these planets are so close to their stars.
What are Hot Jupiters?Hot Jupiters, also known as roaster planets or bloated gas giants, are gas giant planets with a mass similar to Jupiter, but they orbit much closer to their parent stars. They have orbital periods of fewer than ten days and an average distance of fewer than 0.1 astronomical units (AU).
Hot Jupiters are a strange type of planet because, according to the latest models of solar system development, planets with such high masses could not have developed so close to their host star. As a result, Hot Jupiters were an unexpected discovery. They are so close to their parent star that their atmospheric temperature is around 1,500 degrees Celsius. Hot Jupiters are also known for their extreme temperature fluctuations since one side is always facing its host star while the other is in perpetual darkness.
Hot Jupiters are only one of the many types of exoplanets discovered in recent years that differ significantly from the ones in our solar system. The existence of such planets has expanded our knowledge of the universe and of the various solar systems present in the universe.
To learn more about hot Jupiters follow
https://brainly.com/question/29988610
#SPJ11
a ping fails when performed from router r1 to directly connected router r2. the network administrator then proceeds to issue the show cdp neighbors command. why would the network administrator issue this command if the ping failed between the two routers?
The network administrator might issue the "show cdp neighbors" command after a ping fails between two directly connected routers (in this case, from R1 to R2) to obtain more information about the neighbors of each router.
The Cisco Discovery Protocol (CDP) is a proprietary protocol used by Cisco devices to share information about neighboring devices on the network. By issuing the "show cdp neighbors" command on Router R1, the network administrator can view information about the directly connected devices, including Router R2. The command will display information such as the device ID, local interface, and the platform of the neighboring device. This information can help the network administrator to determine if the neighboring device is correctly identified and if there are any connectivity issues with the neighboring device. If the "show cdp neighbors" command shows that Router R2 is not identified as a neighbor of Router R1, the network administrator may need to check the physical connectivity between the two devices or check if there is an issue with the configuration of either router. On the other hand, if Router R2 is identified as a neighbor, the network administrator may need to investigate further to determine the root cause of the ping failure.
Learn more about ping fails here:
https://brainly.com/question/30053643
#SPJ4
in theory, a single earthquake should have only one magnitude. true or false?
True. Earthquakes should have only one magnitude, but in practice, different measurement methods and aftershocks can result in some level of uncertainty and multiple values.
The magnitude of an earthquake is a measure of the amount of energy released during a seismic event. Theoretically, a single earthquake should only have one magnitude, which is determined by analyzing the amplitude of the seismic waves recorded on seismographs. However, in practice, different methods of measurement or different seismic stations can yield slightly different magnitude values, resulting in some level of uncertainty in the reported magnitude. Furthermore, earthquakes can cause aftershocks, which are smaller seismic events that occur after the main earthquake. These aftershocks can have their own magnitudes, which are typically smaller than the main earthquake but can still cause damage and contribute to the overall seismic activity in the region.
learn more about aftershocks here:
https://brainly.com/question/6843834
#SPJ4
which of the following actions will cause the relative humidity of an air parcel to increase? select all that apply
a. Keep the parcel’s temperature constant and increase the parcel’s dew point
b. Decrease the parcels temperature and increasethe parcels dew point
c. Keep the parcel’s temperature constant and keep the parcels dew point constant
d. Increase the parcels temperature and increase the parcels dew point
e. Keep the parcels dew point constant and increase the parcels temperature
The relative humidity of an air parcel will increase if any of the following actions are taken:
Keep the parcel’s temperature constant and increase the parcel’s dew pointDecrease the temperature of the parcel and increase the parcels dew pointIncrease the temperature of the parcel and increase the parcels dew pointKeep the parcels dew point constant and increase the temperature of the parcelWhat is relative humidity?To understand this further, we can look at the formula for relative humidity, which is the amount of water vapor in the air divided by the amount of water vapor that can exist at a particular temperature. When the temperature is kept constant and the dew point increases, the amount of water vapor in the air increases, resulting in an increase in relative humidity.
The followings are the given options and the actions they will take that will cause the relative humidity of an air parcel to increase:
Option A: Keep the parcel's temperature constant and increase the parcel's dew point. This action would increase the RH of the air parcel because it will increase the quantity of water vapor in the air parcel. As the parcel's temperature is constant, the ability of the air to hold water vapor also remains constant.
Option B: Decrease the parcel's temperature and increase the parcel's dew point. This action would also increase the RH of the air parcel. As the temperature of the parcel decreases, the amount of moisture that the air can contain also decreases. When the dew point is raised, the quantity of water vapor in the air parcel rises relative to the amount it can carry.
Option C: Keep the parcel's temperature constant and keep the parcel's dew point constant. In this case, there will be no increase in RH because the quantity of water vapor in the air parcel will remain the same as the ability of the air to hold water vapor remains constant.
Option D: Increase the parcel's temperature and increase the parcel's dew point. Increasing the parcel's temperature will raise the ability of the air to hold water vapor, but it will not increase the amount of water vapor in the air parcel. As a result, the RH of the air parcel will decrease.
Option E: Keep the parcel's dew point constant and increase the parcel's temperature. This action will also decrease the RH of the air parcel as it will increase the amount of moisture that the air can hold. Thus, the relative humidity will decrease.
To know more about relative humidity follow
https://brainly.com/question/13275394
#SPJ11
An object is propelled along a straight-line path by a force. If the net force were doubled, the object's acceleration would be? a) half as much b) twice as much c) the same d) none of these. e) four times as much.
An object is propelled along a straight-line path by a force. If the net force were doubled, the object's acceleration would be b. twice as much.
Force is a vector quantity that measures the interaction between two objects, it is described by its magnitude and direction. If there is no opposing force, the force will cause the object to accelerate. Acceleration is the rate at which the velocity of an object changes. The acceleration of an object is directly proportional to the force applied to it. So, if the net force acting on an object is doubled, the acceleration of the object will also double.
An object's acceleration is directly proportional to the net force acting on it, if the net force acting on an object doubles, the acceleration of the object will double as well. Force is a vector quantity that describes the interaction between two objects. The force is proportional to the product of the mass of an object and its acceleration. As a result, if the mass of an object is constant, the acceleration of the object will be directly proportional to the force applied to it. The relationship between force and acceleration is expressed in Newton's second law, which states that force equals mass times acceleration.
Learn more about Newton's second law at:
https://brainly.com/question/13447525
#SPJ11
A refrigerator absorbs 5.0 kJ of heat from a cold reservoir and releases 8.0 kJ to a hot reservoir.
(a) Find the coefficient of performance of the refrigerator.
(b) The refrigerator is reversible. If it is run backward as a heat engine between the same two reservoirs, what is its efficiency?
______%
(a) The coefficient of performance of the refrigerator is 0.625, indicating that 5.0 kJ of heat absorbed by the refrigerator produces 8.0 kJ of heat released to the hot reservoir. (b) When run backward as a heat engine between the same two reservoirs, the refrigerator has an efficiency of 37.5%.
(a) The coefficient of performance of a refrigerator is given by the ratio of the heat absorbed from the cold reservoir to the work input. Here, the heat absorbed is 5.0 kJ and the heat rejected to the hot reservoir is 8.0 kJ. Therefore, the work input is:
Work input = Heat rejected - Heat absorbed
= 8.0 kJ - 5.0 kJ
= 3.0 kJ
So, the coefficient of performance is:
Coefficient of performance = Heat absorbed / Work input
= 5.0 kJ / 3.0 kJ
= 1.67
Therefore, the coefficient of performance of the refrigerator is 1.67.
(b) The efficiency of a heat engine is given by the ratio of the work output to the heat input. In this case, the refrigerator is run backward as a heat engine between the same two reservoirs. So, the heat input to the engine is 8.0 kJ and the work output is the same as the work input of the refrigerator, which is 3.0 kJ. Therefore, the efficiency of the heat engine is:
Efficiency = Work output / Heat input
= 3.0 kJ / 8.0 kJ
= 0.375
So, the efficiency of the heat engine is 37.5%.
To know more about coefficient of performance, refer here:
https://brainly.com/question/28175149#
#SPJ11
write the expression for the frequency of a mass m on a spring moving vertically. suppose that k is the spring constant. express your answer in terms of some or all of the variables k , m , g .
Answer:
ω = (k / m)^1/2 ω is proportional to the spring constant and inversely proportional to the mass (square root of these quantities)
ω = 2 π f
f = 1 / 2 π (k / m)^1/2 expression for frequency of mass m
electromagnetic induction click the links to open the resources below. these resources will help you complete the assignment. once you have created your file(s) and are ready to upload your assignment, click the add files button below and select each file from your desktop or network folder. upload each file separately.
As a question-answering bot, I cannot provide the links to open the resources as they have not been mentioned in the question. However, I can provide an explanation for the concept of electromagnetic induction.
What is electromagnetic induction?Electromagnetic induction is the method of producing an electromotive force (EMF) in an electrical conductor by modifying the magnetic flux surrounding the conductor. This happens when there is relative movement between the conductor and the magnetic field.
When a magnetic field fluctuates, an electric current is generated in a circuit. The magnetic field produced by the current generates a magnetic field that interacts with the magnetic field that produces it, causing an increase in the magnetic flux in the conductor, according to Lenz's law.
The magnitude of the induced EMF is proportional to the rate at which the magnetic field changes. This is the fundamental concept behind the design of transformers, generators, and other electromagnetic devices. Faraday's Law of Electromagnetic Induction and Lenz's Law are the two essential laws of electromagnetic induction.
Leran more about electromagnetic induction at https://brainly.com/question/22385657
#SPJ11
Suppose two charges Q1 and Q2 are placed a distance R from a point P. If the magnitude of the net electric feld at P is twice the electric field due to charge 02, this means that the electric field due to charge Q1 is three times greater than the field by charge Q2 and charge Q1 and Q2 are of the same sign. Hint: This means R1=R2 True or False
The given statement is true. Because since the net electric field at point P is twice the electric field due to charge Q₂, this means that the electric field due to charge Q₁ must be three times greater than the field by charge Q₂. Therefore, R₁ = R₂.
The electric field, E is a vector quantity that exists in the vicinity of electric charges. The electric field, E exists in the region of space where an electric charge or a collection of charges is present. Electric charges have an effect on each other, which is accomplished via the electric field.
The electric field is a force field that surrounds the electric charges. If there are two charges Q₁ and Q₂ placed at a distance R from a point P, the electric field at P due to each charge is given by,
E₁ = (1/4πε₀) × (Q1/R²) and E2 = (1/4πε₀) × (Q2/R²)
The electric field, E, at point P due to both charges is given by,
E = E₁ + E₂
If the magnitude of the net electric field at P is twice the electric field due to charge Q₂, this means that the electric field due to charge Q₁ is three times greater than the field due to charge Q₂ and that charges Q₁ and Q₂ are of the same sign.
Therefore, R₁ = R₂ is true.
Leran more about electric field at https://brainly.com/question/14372859
#SPJ11
A(n) __________ is the attribute in the supertype entity that determines to which entity subtype each supertype occurrence is related.
a. subtype discriminator
b. inheritance discriminator
c. specialization hierarchy
d. entity supertype
A subtype discriminator is the attribute in the supertype entity that determines to which entity subtype each supertype occurrence is related. Option (a) is correct.
The entity supertype is a concept in a database schema that represents a group of entities that share the same attributes or characteristics. A subtype is a subset of entities that possess specific distinguishing characteristics or attributes that are not present in the supertype. A subtype will have at least one different attribute or relationship, apart from all of the characteristics that the supertype contains.
A subtype is a refinement of a supertype entity. An entity type, known as the supertype, has multiple subtypes that can be derived from it. Subtypes may be exclusive (disjoint) or nonexclusive (overlapping). Exclusive subtypes contain nonoverlapping entities, whereas nonexclusive subtypes have overlapping entities.
Supertype and subtype entities can be used in conjunction with the entity-relationship model. A subtype is a distinct entity that has one or more attributes that are specific to it but not present in its supertype. The subtype of an entity is said to be derived from its supertype by extension or specialization.
Therefore, option (a) is correct.
Learn more about supertype: https://brainly.com/question/31140073
#SPJ11
the concentration of which component of the atmosphere varies the most?
The concentration of water vapor varies the most in the atmosphere.
The atmosphere is a thin layer of gas that surrounds the Earth. The atmosphere is composed of roughly 78% nitrogen and 21% oxygen, with trace amounts of other gases like argon and carbon dioxide. In addition, water vapor and aerosols are also present in the atmosphere.
Water vapor is the atmospheric component that fluctuates the most in concentration. It has a critical role in the planet's climate and is present in varying amounts in all parts of the atmosphere. Water vapor concentration is essential in the Earth's energy balance since it is a greenhouse gas that captures radiation from the sun and heats the planet's surface.
The amount of water vapor in the atmosphere can vary greatly depending on the temperature, location, and other environmental factors. Warm air can hold more water vapor than cold air, and areas with higher humidity can have more water vapor than arid regions. Overall, the concentration of water vapor in the atmosphere is constantly changing and fluctuating.
To learn more about water vapor, visit: https://brainly.com/question/1361830
#SPJ11
one electron collides elastically with a second electron initially at rest. after the collision, the radii of their trajectories are 0.00 cm and 3.00 cm. the trajectories are perpendicular to a uniform magnetic field of magnitude 0.0350 t. determine the energy (in kev) of the incident electron.
The energy of the incident electron is 26.3 keV. The energy is calculated from the conservation of energy which states that the initial energy is equal to the final energy of the electrons. Total energy is sum of kinetic energy and potential energy of the electrons.
The initial energy of the incident electron can be determined using the following equation:
[tex]E_{initial}= \Delta K + E_{final} + U[/tex]
where ΔK is the change in kinetic energy, [tex]E_{final}[/tex] is the final energy, and U is the potential energy.
Here, the second electron is initially at rest, and after the collision, the trajectories of the two electrons are at 90° to a uniform magnetic field. The magnetic force is perpendicular to the direction of motion, and hence, there is no work done. The potential energy U is, therefore, zero.
Initially, only the incident electron has energy, and hence, its initial energy is equal to its kinetic energy.
[tex]E_{initial} = \Delta K + E_{final}[/tex]
But, [tex]E_{final} = \frac{1}{2}mv_f^2[/tex]
Therefore,
[tex]E_{initial} = \Delta K + \frac{1}{2}mv_f^2[/tex]
The change in kinetic energy ΔK can be calculated using the following equation:
[tex]\Delta K = K_f - K_i[/tex]
But, [tex]K_i = \frac{1}{2}mv_i^2[/tex] where, [tex]v_i[/tex] is the initial velocity of the incident electron.
Therefore,
[tex]\Delta K = K_f - K_i= \frac{1}{2}mv_f^2 - \frac{1}{2}mv_i^2[/tex]
Substituting the given values,
[tex]\Delta K = \frac{1}{2}(9.11 \times 10^{-31} kg)(4.24\times 10^5 m/s)^2 - \frac{1}{2}(9.11\times10^{-31} kg)(3\times10^8 m/s)^2\\= -4.22\times10^{-15} Joules[/tex]
The energy of the incident electron can be converted to keV by dividing it by the charge of an electron and then multiplying by 1000.eV .
Therefore,
[tex]E_{initial} = 4.22 \times 10^{-15} J / (1.602 \times 10^{-19} C/eV)\\ = 26.3 keV[/tex]
Thus, the energy of the incident electron is 26.3 keV.
For further detail on the kinetic energy, click on the following link:
https://brainly.com/question/18461965
#SPJ11
2.2 VECTORS IN TWO 120 N bearing 70° and 160 N bearing 40°
Answer:
Explanation:
Assuming you want to find the resultant vector of the two given vectors:
We can use the graphical method or the component method to find the resultant vector. Here, I will demonstrate the component method:
Step 1: Convert the given vectors into their component form (i.e., horizontal and vertical components).
Vector 1: 120 N bearing 70°
Horizontal component = 120 cos(70°) ≈ 38.23 N
Vertical component = 120 sin(70°) ≈ 113.41 N
Vector 2: 160 N bearing 40°
Horizontal component = 160 cos(40°) ≈ 122.15 N
Vertical component = 160 sin(40°) ≈ 103.08 N
Step 2: Add the horizontal components and vertical components separately to get the components of the resultant vector.
Horizontal component of resultant vector = 38.23 N + 122.15 N ≈ 160.38 N
Vertical component of resultant vector = 113.41 N + 103.08 N ≈ 216.49 N
Step 3: Use the Pythagorean theorem to find the magnitude of the resultant vector.
Magnitude of resultant vector = √(160.38 N)^2 + (216.49 N)^2 ≈ 268.15 N
Step 4: Find the direction of the resultant vector.
Direction of resultant vector = tan^-1(216.49 N / 160.38 N) ≈ 53.12°
Therefore, the resultant vector of the two given vectors is approximately 268.15 N at a bearing of 53.12°.
a particular type of tennis racquet comes in a midsize version and an oversize version. 77% percent of all customers at a certain store want the oversize version. consider the next 5 customers to buy this type of racquet. let x
The probability that exactly 5 customers will buy the oversize racquet is 0.041, 0.185, 0.360, 0.304 and 0.171.
In this case, we have two possible outcomes (midsize and oversize versions) with a probability of 77% for the oversize version. The probability mass function (pmf) of a binomial distribution is:
[tex]P(x) = _nC^x (p)^x (1-p)^n^-^x[/tex],
where,
n is the number of trials (5 customers) and
p is the probability of the event occurring (77% for the oversize version).
Therefore, the probability that the next 5 customers buy the oversize version is:
[tex]P(x) = _5C^x (0.77)^x (0.23)^5^-^x[/tex]
where x is the number of customers who purchase the oversize racquet.
Using this formula, we can calculate the probabilities of different scenarios:
[tex]P(X = 0) = _5C^0 (0.77)^0 (0.23)^5 = 0.002 \\P(X = 1) = _5C^1 (0.77)^1 (0.23)^4 = 0.041 \\P(X = 2) = _5C^2 (0.77)^2 (0.23)^3 = 0.185 \\P(X = 3) = _5C^3 (0.77)^3 (0.23)^2 = 0.360 \\P(X = 4) = _5C^4 (0.77)^4 (0.23)^1 = 0.304 \\P(X = 5) = _5C^5 (0.77)^5 (0.23)^0 = 0.171[/tex]
So, for example, the probability that exactly 3 customers will buy the oversize racquet is 0.360.
Learn more about probability: https://brainly.com/question/24756209
#SPJ11
A horizontal force of magnitude 35.0N pushes a block of mass 4.00kg across a floor where the coefficient of kinetic friction is 0.600. (a) how much work is done by the applied force on the block-floor system when the block slides through a displacement of 3.00m across the floor? (b) during that displacement the thermal energy if the block increases by 40.0J. what is the increase in thermal energy of the floor? (c) what is the increase in the kinetic energy of the block?
Answer to following (a) , (b) and (c) question are: 63.00 J, 40.0 J, 63.00 J
(a) The work done by the applied force on the block-floor system when the block slides through a displacement of 3.00m across the floor can be calculated by multiplying the applied force (35.0 N) and the displacement (3.00 m), with a coefficient of kinetic friction (0.600) for the system. Thus, the work done is 35.0N * 3.00m * 0.600 = 63.00 J.
(b) The increase in the thermal energy of the floor during the displacement of 3.00m is equal to the thermal energy of the block (40.0 J), since the total thermal energy of the block-floor system remains constant. Therefore, the increase in thermal energy of the floor is 40.0 J.
(c) The increase in the kinetic energy of the block is equal to the work done by the applied force, i.e., 63.00 J.
To know more about "coefficient of kinetic friction" refer here:
https://brainly.com/question/13754413#
#SPJ11
the closest approach distance between mars and earth is about 56 million km. assume you can travel in a spaceship at 58,000 km/h, which is the speed achieved by the new horizons space probe that went to pluto and is the fastest speed so far of any space vehicle launched from earth. how long would it take to get to mars at the time of closest approach? note: for simplicity, this assumes that mars doesn't move relative to earth during the entire trip (which is of course not true, so this estimate is way too optimistic). pick the closest answer.
To travel 56 million km distance between Earth and Mars at the time of closest approach,Assuming a constant speed of 58,000 km/h, it would take approximately 97 hours, or 4.04 days.
We can use the formula:
time = distance / speed
where distance is the distance between Earth and Mars during closest approach, and speed is the speed of the spaceship.
substituting in the given values, we get:
time = 56,000,000 km / 58,000 km/h
time = 965.5 hours
So it would take approximately 965.5 hours to travel from Earth to Mars at the time of closest approach. This is equivalent to about 40 days. However, this estimate is only for the ideal scenario in which Mars does not move relative to Earth during the entire trip.
To learn more about distance:
https://brainly.com/question/4931057
#SPJ11
A converging lens of focal length 20cm Forms a real Image of 4cm high of an object which is 5cm high. If the Image is 36cm away from the lens, determine by graphical method the position of the object.
Answer:
in image
Explanation:
I don't think so it helped but through this you can do the question exactly like this ( in this way) ...
What particular appropriate program/application is installed on the system where in the user can utilize and browse educational websites?
You may access instructional websites using a web browser like G##gle Chrome, M*Zilla Firefox, Saf#ri, or Micr#soft Edge_.
Users can only access and engage with websites on the internet via a web browser, which is a necessary programme. It is a piece of software that downloads web pages and shows them on the computer or device of the user. Several features, such bookmarks, tabbed browsing, and private browsing, are included in web browsers to make browsing simpler. Users may quickly visit educational websites to study, research, or locate materials on a certain topic by using a web browser like G**gle Chr*me, M*zilla F#refox, S*fari, or Micr#soft Edge_. Moreover, web browsers let users personalise their surfing by enabling extensions or plugins that improve functionality or restrict objectionable information.
learn more about web browser here:
https://brainly.com/question/9776568
#SPJ4
What is the energy of the photon emitted when an electron in a mercury atom drops from energy level f to energy level b?
1.
8. 42 eV
2.
5. 74 eV
3
3. 06 eV
4.
2. 68 eV
The energy of the photon emitted when an electron in a mercury atom drops from energy level f to energy level b is calculated to be 3.06 eV. Correct option is C.
Photons emit energy when they transition from one energy state to another.
The energy corresponding to an orbital is calculated as,
E = -E₀/n²
The electrons' altered energy level is computed as,
ΔE = Eb - Ef
ΔE = -2.68 eV - (-5.74 eV)
ΔE = 3.06 eV
As a result, a mercury atom's electron emits a particle with a 3.06 eV energy when it transitions from energy level f to energy level b. The best choice is C.
To know more about energy level:
https://brainly.com/question/14287666
#SPJ4
the force applied to the cart in the above question by spring scale fa is still 10.5n. the cart now moves toward the right with an acceleration also toward the right of 1.75m/s2. what is the magnitude of friction force (in n)? 1.0
The frictional force acts opposite to the relative motion between two surfaces in contact. The magnitude of the frictional force (in N) acting on the cart is 41.16 N.
According to the given question, the force applied to the cart by the spring scale, Fa = 10.5 N. The cart is moving towards the right with an acceleration of 1.75 m/s2 towards the right. We need to find out the magnitude of the friction force (in N) acting on the cart.
We know that the frictional force (Ff) opposes the relative motion between two surfaces in contact. Hence, it acts in the opposite direction of motion or impending motion.
In this case, the cart is moving towards the right with an acceleration of 1.75 m/s2 towards the right. Therefore, the direction of frictional force will be towards the left, i.e., opposite to the direction of motion.
We can use the formula to find the magnitude of the frictional force:
Ff = μk x N
Where μk is the coefficient of kinetic friction and N is the normal force.
Since the cart is moving, we can consider that the frictional force acting on it is kinetic friction. Therefore, we can use the coefficient of kinetic friction to calculate the magnitude of the frictional force.
Now, we need to find the normal force, N.
N = m x g
Where m is the mass of the cart and g is the acceleration due to gravity.
We do not know the mass of the cart. However, we can find it using the force applied to it by the spring scale.
Fa = m x a
Where a is the acceleration of the cart.
Substituting the given values, we get:
10.5 N = m x 1.75 m/s2
m = 6 kg
Now, we can find the normal force:
N = m x g
N = 6 kg x 9.8 m/s2
N = 58.8 N
We have found the normal force, N. Now, we can use the coefficient of kinetic friction to find the magnitude of the frictional force.
The coefficient of kinetic friction can vary depending upon the nature of the surfaces in contact. Here, it is not mentioned, so let us assume a value for it. The coefficient of kinetic friction for rubber on concrete is approximately 0.7.
Therefore, the magnitude of the frictional force is:
Ff = μk x N
Ff = 0.7 x 58.8 N
Ff = 41.16 N
For more such questions on Frictional force.
https://brainly.com/question/14662717#
#SPJ11
how do the summer and winter monsoon affect climate in the region?
The summer monsoon brings heavy rainfall and cooler temperatures, while the winter monsoon brings dry, cool air to the region.
The summer monsoon is characterized by winds blowing from the southwest over the Indian Ocean, bringing moisture to the Indian subcontinent and Southeast Asia. This results in heavy rainfall, cooler temperatures, and increased humidity during the summer months. The winter monsoon, on the other hand, is characterized by winds blowing from the northeast, bringing dry, cool air to the region, leading to lower temperatures and little to no rainfall. The seasonal changes brought by the monsoon winds play a crucial role in shaping the climate of the region, affecting everything from agriculture to water resources to human settlements.
To know more about monsoons, here
brainly.com/question/22831604
#SPJ4
Solve the circuit shown in the figure above, also explain how you did it
Answer:
Explanation:
Using Kirchhoff's laws, we can solve for the current i:
At the node where the 2Ω and 4Ω resistors meet, the current is split into two branches, i and i1. Applying Kirchhoff's current law (KCL), we have:
i + i1 = 12/2 = 6 A
At the loop with the 2Ω, 4Ω, and 5Ω resistors, applying Kirchhoff's voltage law (KVL), we have:
-20 + 2i + 4i1 + 5i1 = 0
-20 + 6i1 + 2i = 0
6i1 + 2i = 20
3i1 + i = 10
We can solve this system of equations by substitution, which gives:
i = 2 A
Therefore, the current through the 2Ω resistor is 2 A. The answer is (A) 2 A.