how do you do question 2?

Answer:

a)  [tex]m_v= 56.16 Kg[/tex]

    [tex]m_l= 14.04 Kg[/tex]

b)  [tex]\mu=1.37\%[/tex]

Explanation:

From the question we are told that:

Volume of tank [tex]V_t=1m^3[/tex]

Temperature of [tex]CO_2=-17^oC[/tex]

Quality of the mixture [tex]Q= 70%[/tex]

Specific Volume constants at [tex]-17^oC:[/tex]

 [tex]v_f = 0.9827*10^{-3} m3/kg[/tex]

 [tex]v_g =1.756*10^{-2} m3/kg.[/tex]

Generally the equation for Specific Volume is mathematically given by

 [tex]v = v_f + x (v_g -v_f)[/tex]

 [tex]v= (0.9827 * 10^{-3} ) + 0.8 * (17.56 * 10^{-3} -0.9827 * 10^{-3})[/tex]

 [tex]v= 0.014244 m3/Kg[/tex]

Generally the equation for Mass is mathematically given by

 [tex]m=\frac{v'}{v}[/tex]

 [tex]m=\frac{1}{0.014244}[/tex]

 [tex]m=70.20 Kg[/tex]

Generally the Mass of saturated Vapor is mathematically given by

 [tex]m_v=0.8 * (70.202)[/tex]

 [tex]m_v= 56.16 Kg[/tex]

Generally the Mass of saturated Liquid is mathematically given by

 [tex]m_l = (70.20 Kg)-(56.16 Kg)[/tex]

 [tex]m_l= 14.04 Kg[/tex]

b)

Generally the equation for Volume is mathematically given by

 [tex]v_l = m_l x v_f[/tex]

 [tex]v_l= (14.04 Kg) (0.9827 x 10{-3} m3/kg)[/tex]

 [tex]v_l= 0.01379 m^3[/tex]

Therefore Percentage of liquid

 [tex]\mu = \frac{v_l}{v} * 100 \%[/tex]

 [tex]\mu= [(0.01379 m^3)/(1 m^3)] *100 \%[/tex]

 [tex]\mu=1.37\%[/tex]

Answer:

Explanation:

A galvanometer which is used for the measurement of a very small current can be converted to a voltmeter when it is connected to a high resistance or a multiplier is a series. The purpose of this is to reduce the amount of current that goes through the galvanometer so as prevent full scale deflection.

Answer:

Friction Opposes Motion of an Object.

Now

To get the Net force that Moves an Object and causes acceleration....You subtract the Frictional force

Net force = Pushing Force - Frictional Force

Recall

Net Force; F=Ma

Ma = P - Fr

Now the question asked for How Much force Must be applied to Maintain a Constant velocity.

In a Constant Velocity Motion... Acceleration do not change... Its Zero

So Putting this into the formula above

M(0) = P - Fr

0=P - Fr

Fr = P.

This means

That The force needed to keep this object Moving at Constant Velocity Must be equal to its Frictional Force

Since Frictional Force; Fr =223N

The Applied Force(Pushing Force) Must be equal to 223N too.

Answer:

The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics

Explanation:

Radhe Radhe❤

Answer:

v = 4 m/s

Explanation:

Given :

Ball X :

Mass, m1 = 8kg ;

Initial Velocity, u1 = 2 m/s

Final velocity, v1 = 0

Ball Y:

Mass, m2 = 4kg ;

Initial Velocity, u2 = 0 m/s

Final velocity, v2 = v

(m1u1 + m2u2) = (m2v2 + m1v1)

(8*2 + 4*0) = (4*v + 4*0)

16 + 0 = 4v + 0

16 = 4v

v = 16 / 4

v = 4 m/s

Answer:

Explanation:

This is the Law of Momentum Conservation which for us looks like this:

[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:

[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and

16 + 0 = 0 + 4.0v and

16 = 4.0v so

v = 4.0 in the direction of ball X

Answer:

C

Explanation:

Prevents further damage to the network cable.

Explanation:

[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]

By the conduction process the heat reaches the pin.Option C is correct.

The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.

Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1​.

By the conduction process the heat reaches the pin.

Hence option C is correct.

To learn more about the heat transfer refer to the link;

https://brainly.com/question/13433948

#SPJ2

Answer:

d. elastic potential energy

Answer: False

Explanation:

Growing different crops in different seasons in the same field will deplete the soil of nutrients. False. Growing different crops In the same field actually help to improve the fertility of the field.

Answer:

ummm a whole bunch

Explanation:

Answer:

Quantity of charge = 80 Coulombs

Explanation:

Given the following data;

Current = 2 A

Time = 40 seconds

To find the amount of charge flowing through the light bulb;

Mathematically, the quantity of charge passing through a conductor is given by the formula;

Quantity of charge = current * time

Substituting into the formula, we have;

Quantity of charge = 2 * 40

Quantity of charge = 80 Coulombs

The answer is -233.15° C

-

Explanation:

We know,

0 Kelvin = -273.15° C

So, 40 K = (-273.15+40) = -233.15° C

If my answer helps then please mark me brainliest.

Answer:

-233.15'C

Explanation:

Answer:

True

Explanation:

The team with the most points at the end of the game is the winner.

Answer:

The primary nutrients are nitrogen, phosphorus and potassium.

The intermediate nutrients are sulfur, magnesium, and calcium.

The remaining essential elements are the micronutrients and are required in very small quantities.

Answer:

The primary nutrients are nitrogen, phosphorus and potassium.

The intermediate nutrients are sulfur, magnesium, and calcium.

The remaining essential elements are the micronutrients and are required in very small quantities.

Explanation:

Answer:

Option C. 20 V

Explanation:

We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:

Resistor 1 (R₁) = 20 Ω

Resistor 2 (R₂) = 40 Ω

Resistor 3 (R₃) = 60 Ω

Equivalent Resistance (R) =?

R = R₁ + R₂ + R₃ (series arrangement)

R = 20 + 40 + 60

R = 120 Ω

Next, we shall determine the current in the circuit. This can be obtained as follow:

Voltage (V) = 60 V

Equivalent Resistance (R) = 120 Ω

Current (I) =?

V = IR

60 = I × 120

Divide both side by 120

I = 60 / 120

I = 0.5 A

Finally, we shall determine the potential drop across R₂. This can be obtained as follow:

Current (I) = 0.5 A

Resistor 2 (R₂) = 40 Ω

Voltage (V) =?

V = IR₂

V = 0.5 × 40

V = 20 V

Therefore, the potential drop across R₂ is 20 V

Answer:

t_total = 6.99 s

Explanation:

It asks us how long it takes to hear the sound, for this we must look for the time (t₁) it takes for the sound to reach the microphone, the time it takes for the video signal (t₂) to reach the television and the time (₃) it takes for the TV sound to reach us, so the total delay time is

         t_total = t₁ + t₂ + t₂

we look for t1, it indicates that the distance x = 22m

          v = x / t

           t = x / v

           t₁ = 22/343

           t₁ = 6.41 10-2 s

time t₂

          t₂ = 4500 103/3 108

          t₂ = 1.5 10-5 s

time t₃

          t₃ = 2/343

          t₃ = 5.83 10⁻³

Total time is

         t_total = t₁ + t₂ + t₃

         t_total = 6.41 10⁻² + ​​1.5 10⁻⁵ + 0.583 10⁻²

         t_total = 6.99 s

Answer:

Acceleration = 4 m/s²

Explanation:

Given the following data;

Force = 8 N

Mass = 2 kg

To find the acceleration of the block;

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

[tex] Acceleration = \frac {Net \; force}{mass} [/tex]

Substituting into the formula, we have;

[tex] Acceleration = \frac {8}{2} [/tex]

Acceleration = 4 m/s²

Answer:

Circuits A and B are both series circuit.

Explanation:

In series combination, two resistors are connected with their ends to ends. The equivalent resistance in this case is given by :

[tex]R_s=R_1+R_2+...[/tex]

In circuit A both voltage (V) and R₁ are connected in series.

Similarly in circuit B, voltage (V), R₁ and R₂ are in series./

Hence, the correct option is (a).

The name given to it is "terminal velocity".

In reality, it isn't a velocity, and it doesn't happen in free-fall.

Go figure.

Answer:

0.775 g/cm³

Explanation:

The given parameters are;

The mass of the alcohol = 21 g

The density of the of the alcohol = 0.7 g/cm³

The mass of water with whichit is mixed = 10 g

The density of water = 1.0 g/cm³

Therefore, the mass of the mixture, m = 21 g + 10 g = 31 g

Volume = Mass/Density

The volume of the alcohol = 21 g/(0.7 g/cm³) = 30 cm³

The volume of the water = 10 g/(1.0 g/cm³) = 10 cm³

Therefore, the volume of the mixture, V = 30 cm³ + 10 cm³ = 40 cm³

The density of the mixture, ρ = (Mass, m)/(Volume, V) = m/V

∴ ρ = (31 g)/(40 cm³) = 0.775 g/cm³

The density of the mixture, ρ = 0.775 g/cm³.

Answer:

1. T₁ is approximately 100.33 N

T₂ is approximately -51.674 N

2. 230°F is 383.15 K

3. Part A

The total torque on the bolt is -4.2 N·m

Part B

Negative anticlockwise

Explanation:

1. The given horizontal force = 86 N

The direction of the given 86 N force = To the left (negative) and along the x-axis

(The magnitude and direction of the 86 N force = -86·i)

The state of the system of forces = In equilibrium

The angle of elevation of the direction of the force T₁ = 31° above the x-axis

The direction of the force T₂ = Downwards, along the y-axis (Perpendicular to the x-axis)

Given that the system is in equilibrium, we have;

At equilibrium, the sum of the horizontal forces = 0

Therefore;

T₁ × cos(31°) - 86 = 0

T₁ = 86/(cos(31°)) ≈ 100.33

T₁ ≈ 100.33 N

Similarly, at equilibrium, the sum of the vertical forces = 0

∴ T₁×sin(31°) + T₂ = 0

Which gives;

100.33 × sin(31°) + T₂ = 0

T₂ = -100.33 × sin(31°) ≈ -51.674

T₂ ≈-51.674 N

2. 230° F to Kelvin

To convert degrees Fahrenheit (°F) to K, we use;

[tex]Degrees \ in \ Kelvin, K = (x^{\circ} F + 459.67) \times \dfrac{5}{9}[/tex]

Pluggining in the given temperature value gives;

[tex]Degrees \ in \ Kelvin, K = (230^{\circ} F + 459.67) \times \dfrac{5}{9} = 383.15[/tex]

230°F = 383.15 K

3. Part A

Torque = Force × perpendicular distance from the line of action of the force

Therefore, the clockwise torque = 9 N × 0.4 m = 3.6 N·m (clocwise)

The anticlockeisre torque = 13 N × 0.6 m = 7.8 N·m (anticlockwise)

The total torque o the bolt = 3.6 N·m - 7.8 N·m = -4.2 N·m (clockwise) = 4.2 N·m anticlockwise

Part B

The torque is negative anticlockwise.

third down, chris is correct

Answer and Explanation:

Cleaning tools, equipment, supplies, and materials that can be easily found in a school in one each are: scrub brush, sponges, buckets and brooms.

These equipments are essential to promote a clean, organized and safe environment and for this reason, they can be easily found both at school and in a home, since the cleanliness of these two places is essential for the well-being, proactivity and health of the people who attend them.

Answer:

the correct answer  is 75 N

Explanation:

This is a translational balancing exercise, let's set a reference system with the x-axis in the direction of the plane and the y-axis perpendicular to the plane.

In this reference system the force to decompose is the weight

         sin 42 = Wₓ / W

        cos 42 = W_y / W

        Wₓ = W sin 42

        W_y = W cos 42

        Wₓ = 112.1 sin 42 = 75.0 N

        W_y = 112.1 cos 42 = 83.3 N

The expression for equilibrium on the x-axis is

         Wₓ - fr = 0

         fr = Wₓ

         fr = 75.0 N

the correct answer  is 75 N

Answer:

4 option is correct ........

Answer:

ans: 13.53 × 10^17 Newton

Answer:

density = mass/volume

density=0.8

volume=36

mass=?

0.8=mass/36

mass = 36x0.8=28.8g

Answer:

I think the echo sounds do not depend on the direction of the sound and sound the same as the original sound

Explanation:

An echo is defined as a sound that is produced when a sound wave is reflected back from any hard surface and repeated.

Two major application of echo include:

- Bats, fisherman, and dolphins use echoes to detect or identify any object /obstruction.

- Echo is widely used in medical science applications for imaging of human organs such as echocardiography and ultrasound.

I hope this help you!:)