Answer: You can change many things ranging from the size and shape of the paper plane. Cutting slits into the plane allows the air to carry it further.
F = m x g is the formula of
The weight of an object is the force of gravity on the object and may be defined as the mass times the acceleration of gravity, w = mg. Where W = weight in N. m = mass in kg and g = gravitational field strength in N/kg. g = 10 N/kg.
A 10m/s
B 12m/s
C 14m/s
D 19m/s
Answer:
C
Explanation:
Apply the uniform acceleration equation [tex]v^{2} = u^{2} +2as[/tex]
v: Final velocity (When the stone reaches its maximum height)
u: Initial velocity (The velocity of the stone at the instance when it is thrown)
a: Acceleration due to gravity
s: Displacement of the stone
Take [tex]v=0m/s[/tex] since the stone is momentarily at rest when it reaches its maximum height.
Take [tex]a = -9.81 m/s^2[/tex], the negative sign indicates the stone is decelerating due to gravity.
Take [tex]s=10m[/tex] as stated in the question.
[tex]0^2=u^2+2(-9.81)(10)[/tex]
[tex]196.2=u^2[/tex]
[tex]u=\sqrt{196.2}[/tex]
[tex]u=14.00714104m/s[/tex]
Therefore, the closest answer is C ([tex]14m/s[/tex])
the dependence of the rate constant on temperature is expressed by which equation?
The dependence of the rate constant on temperature is expressed by the Arrhenius equation: k = A*e^(-Ea/RT), where k is the rate constant.
What is Arrhenius equation?The Arrhenius equation, which goes as follows: k = A*e(-Ea/RT), where k is the rate constant, A is the preexponential factor, Ea is the activation energy, R is the gas constant, and T is the absolute temperature, describes how the rate constant depends on temperature.The Arrhenius equation is a mathematical relationship that describes the temperature dependence of the rate constant of a chemical reaction.The pre-exponential factor (A) is a constant that represents the frequency of collisions between reactant molecules that have sufficient energy to overcome the activation energy barrier and undergo a reaction.To know more about Arrhenius equation , check out :
https://brainly.com/question/14977272
#SPJ4
why is a direct comparison of station pressures difficult?
A direct comparison of station pressures can be difficult because station pressure is affected by a number of local factors such as altitude, temperature, and humidity, which can vary greatly even over short distances.
Station pressure is the atmospheric pressure measured at a specific location, usually at ground level. Since atmospheric pressure decreases with altitude, two stations at different elevations will have different station pressures even if they are located very close to each other. For example, a station located at the base of a mountain will have a higher station pressure than a station located at the top of the same mountain.
Temperature and humidity can also affect station pressure. Warmer air is less dense than cooler air, so a station located in a warmer environment will have a lower station pressure than a station in a cooler environment. Similarly, humid air is less dense than dry air, so a station located in a more humid environment will have a lower station pressure than a station in a drier environment.
To make meaningful comparisons of atmospheric pressure between different locations, meteorologists typically adjust the station pressure to a standard reference pressure level, such as sea level. This adjusted pressure is called sea-level pressure or mean sea level pressure (MSLP), and it provides a more accurate measure of the true atmospheric pressure at different locations, allowing for easier comparisons. However, even MSLP values can still be affected by other local factors, such as wind and surface conditions, so caution must be exercised when interpreting and comparing these values.
For more questions on pressure
https://brainly.com/question/28012687
#SPJ4
Write a letter to Dr. Flores in the space below.
Word Bank
attraction adding energy freedom of movement gas
kinetic energy liquid molecules phase change
removing energy solid speed
The procedure of the formal letter starts with your Name, Contact Information, and Date followed by the Recipient's Name and Contact Information. After this, the greeting and the body of the letter are prepared.
What is a Letter?In literature, a letter may be characterized as a kind of non-fictional written, typed, or printed communication. These are usually written to facilitate communication between two individuals and are usually sent to the recipient via mail or post in an envelope.
From XYZ,
To Dr. Flores.
Subject: Discuss the principle of Kinetic energy "an energy of motion"
Respected sir,
The roles of kinetic energy and molecular attraction in phase change by completing a hands-on activity, and exploring the Simulation. After all the solid has melted, once again, the heat added goes to increasing the kinetic energy (and temperature) of the liquid molecules until they boil.
A phase change is a process of a substance gaining or losing energy so that molecules or atoms either come closer together or become farther. It also involves the freedom of movement of the gaseous particles when there is the process of phase change successfully accomplished.
Therefore, a letter to Dr. Flores is well written in a proper format.
To learn more about Kinetic energy, refer to the link:
https://brainly.com/question/25959744
#SPJ1
An NFL punter punts a 0.02 kg football
100 meters into the air.
A. What is the initial potential energy of the
ball when it's at its peak?
B. What is its final kinetic energy before it
hits the ground?
C. What is the velocity of the ball before it hits
the ground?
The initial potential energy of the ball when it's at its peak will be 20 J. The final kinetic energy before it hits the ground will be 20 J and the velocity before it hits the ground will 44.72 m/s.
How do you calculate the initial potential energy when the ball is at its peak?To calculate potential energy, we use the equation P.E. = mgh
Hence, potential energy, P.E. = mgh = 0.02 x 10 x 100 = 20 J.
How do you calculate the final kinetic energy before it hits the ground?Since the potential energy is converted to kinetic energy at this point, the final kinetic energy before it hits the ground will be 20 J.
How do you determine the velocity of the ball before it hits the ground?The velocity of the ball can be calculated by using the equation v = [tex]\sqrt{2gh}[/tex]
Hence, the velocity, v = [tex]\sqrt{2 * 10 * 100}[/tex] = 44.72 m/s.
To learn more about potential energy visit:
brainly.com/question/12807194
#SPJ1
How does the movement of air affect the type of weather that forms high pressure and low pressure.
The movement of air is responsible for creating high-pressure and low-pressure systems in the atmosphere. The differences in air pressure result from differences in air temperature, which drive the flow of air and affect the formation of weather patterns.
A high-pressure system is created when air rises and cools, leading to the formation of clouds and precipitation. The sinking air creates an area of high pressure at the surface. Conversely, a low-pressure system forms when air at the surface rises and is replaced by sinking air, creating an area of low pressure. This rising air can lead to the development of clouds and storms.
The movement of air between high and low-pressure systems drives winds and helps distribute heat and moisture around the planet, which in turn affects the formation of weather patterns. The differences in air pressure also play a role in the formation of ocean currents, which help regulate the Earth's climate. By understanding how air movement affects the formation of high and low-pressure systems, we can gain valuable insight into the weather patterns that shape our planet.
Learn more about precipitation
brainly.com/question/20925010
#SPJ4
A step-up transformer has 30 turns on its primary coil and 300 turns on its secondary coil. A 50V AC supply is connected to the input coil. What is the output potential difference?

The voltage is 500 V
What is a step up transformer?A step-up transformer is an electrical device that increases the voltage of an alternating current (AC) power source. The term "step-up" refers to the increase in voltage that occurs when the AC power passes through the transformer. The primary winding of the transformer is connected to the incoming AC power source, while the secondary winding is connected to the load. The number of turns in the secondary winding is greater than the number of turns in the primary winding, which results in an increase in voltage.
We have that;
Ns/Np = Vs/Vp
Ns = Number of turns in secondary
Np = Number of turns in primary
Vs = Voltage in secondary
Vp = Voltage in primary
Then we have that
300/30 = vs/50
Vs = 300 * 50/30
Vs = 500 V
Learn more about voltage:https://brainly.com/question/29445057
#SPJ1
what is the resolving power of a 2-meter-diameter telescope focusing visible light?
A telescope's resolving power may be determined using the following formula: Resolving power is calculated as 11.25 seconds of arc/d, where d is the centimeter-based diameter of the objective.
What should a telescope's resolving power be?For small telescopes, the resolving power is often calculated using the Dawes limit: = 4.56/D, where is the resolving power in arcseconds and D is the aperture in inches. A 3-inch telescope, for instance, should have a resolving power of around 1.5", but an 8-inch telescope has a resolving power of roughly 0.57".
The pupil of your eye and the apertures of telescopes and cameras are examples of circular apertures that fall under the 1.22 factor. Diffraction sets a resolution limit on the amount of light that may travel through an aperture of diameter D.
learn more about resolving power
https://brainly.com/question/30432649
#SPJ4
what temperature does water freeze when thrown in air
About minus-42 degrees.
The smaller streaks are from condensate coming off falling water droplets — not water that has frozen midair. The air is not quite cold enough to freeze water immediately, which happens at about minus-42 degrees.
What is water?
It is a chemical substance that is the primary component of the Earth's hydrosphere and the fluids of all known living things. It is transparent, flavourless, odourless, and almost colourless (in which it acts as a solvent).In spite of not providing food, energy, or organic micronutrients, it is essential for all known forms of life. The liquid condition of water at standard pressure and temperature is also referred to as "water".To know more about water, click the link given below:
https://brainly.com/question/28465561
#SPJ1
what is grams to moles conversion?
Grams to moles conversion is a common calculation in chemistry that allows you to convert a given mass of a substance, expressed in grams, to its corresponding amount of moles.
The formula for converting grams to moles is:
moles = grams / molar mass
Moles are useful in chemical calculations as they allow for the conversion between the mass of a substance and the number of particles it contains. For example, if you know the number of moles of a substance and its molar mass, you can calculate the mass of the substance.
Moles are also important in the concept of stoichiometry, which involves calculating the amounts of reactants and products in a chemical reaction. By using the mole ratio of reactants and products, it is possible to determine the theoretical yield of a reaction and compare it to the actual yield.This number is known as Avogadro's number and is equal to 6.022 x 10^23 particles.
To learn more about Moles visit here:
brainly.com/question/21323029
#SPJ4
A capacitor is designed so that one plate is large and the other is small. If the plates are connected to a battery, what will happen? (a) the large plate has a greater charge than the small plate
(b) the large plate las less charge than the small plate
(c) the plates have equal, but opposite, charge.
"A capacitor is designed so that one plate is large and the other is small. If the plates are connected to a battery, the plates have equal, but opposite, charge." Correct option is C.
Two conductors that are near to one another and are isolated from one another make up a capacitor, a device for storing electrical energy. A simple example of such a storage device is the parallel-plate capacitor. The capacitor is said to have a charge Q if positive charges which total +Q are deposited on one conductor and a corresponding amount of negative charges (Q) are placed on the second conductor.
Numerous significant applications include capacitors. For example, they are used in digital circuits to protect data during brief power outages so that information from huge computer memory is not destroyed. The information is kept secure by the electric energy stored in the capacitors.
To know more about capacitor:
https://brainly.com/question/17176550
#SPJ4
If a resistor of is rated at a maximum power dissipation of , what is the maximum current it can safely handle without damage?.
Potentially, the maximum current might be pulled whenever the external resistance is zero.
What are the characteristics of a resistor?
The term "resistor" refers to a passive electrical component with two terminals that is employed in electrical circuits to limit or regulate the flow of current. A resistor's primary function is to lower the voltage and reduce current flow in a specific area of the circuit.
If there is an excessive current flow in a circuit, the fuse wire heats up and melts, opening the circuit but killing the fuse. A repeatable device, a circuit breaker shuts off a circuit as soon as the current reaches risky levels.
To learn more about current use link below:
https://brainly.com/question/1100341
#SPJ4
How much work does Claire do if she pulls out with 150 N on a rope, and she pulls the rope
out 15 m?
(Show work please)
The work done by Claire is given as 2250 Joules of work
What is work done in PhysicsThe statement workdone is used to refer to the amount of work that has been done on an item when a certain amount of force is applied to it over some distance
The work done by Claire can be calculated using the formula W = F * d, where F is the force she applied and d is the distance over which she applied the force.
In this case, F = 150 N and d = 15 m, so
W = 150 N * 15 m
= 2250 J (joules).
Therefore, Claire does 2250 J of work.
Read more on work done here:https://brainly.com/question/8119756
#SPJ1
You are taking flying lessons from an experienced pilot. You and the pilot are up in the plane, with you in the pilot seat. The control tower radios the plane, saying that, while you have been airborne, a 37.0 mi/h crosswind has arisen, with the direction of the wind perpendicular to the runway on which you plan to land. The pilot tells you that your normal airspeed as you land will be 83.0 mi/h relative to the ground. This speed is relative to the air, in the direction in which the nose of the airplane points. He asks you to determine the angle (in degrees) at which the aircraft must be "crabbed," that is, the angle between the centerline of the aircraft and the centerline of the runway that will allow the airplane's velocity relative to the ground to be parallel to the runway.
The angle at which the airplane must be crabbed is approximately 23.1° relative to the centerline of the runway. This means that the airplane will have to point slightly into the wind in order to maintain a straight path relative to the ground along the runway.
What is Velocity?
Velocity is a vector quantity that describes the rate at which an object changes its position with respect to time. It is defined as the displacement of an object divided by the time interval over which the displacement occurred.
Velocity is represented by a vector, which has both magnitude (the speed of the object) and direction. The units of velocity are typically expressed in terms of distance per time, such as meters per second (m/s) or miles per hour (mph).
To solve this problem, we can use vector addition to find the resulting velocity of the airplane relative to the ground, given its airspeed and the crosswind. The angle between this resulting velocity and the centerline of the runway will be the angle at which the aircraft must be crabbed.
Let's consider the velocity vectors of the airplane relative to the ground and relative to the air. The velocity of the airplane relative to the air is given as 83.0 mi/h, and we can represent this as a vector with magnitude 83.0 mi/h and direction parallel to the nose of the airplane.
The velocity of the wind relative to the ground can be represented as a vector with magnitude 37.0 mi/h and direction perpendicular to the runway. Let's call this vector W. Since the wind is perpendicular to the runway, we can treat it as a horizontal vector.
To find the resulting velocity of the airplane relative to the ground, we need to add the velocity vector of the airplane relative to the air to the velocity vector of the wind relative to the ground. Let's call the resulting velocity vector V. Since we want the airplane's velocity relative to the ground to be parallel to the runway, we can treat V as a horizontal vector.
To find the angle at which the airplane must be crabbed, we can find the angle between V and the centerline of the runway. Let's call this angle θ.
Now, let's use vector addition to find V:
V = 83.0 mi/h (parallel to the nose of the airplane) + 37.0 mi/h (perpendicular to the runway)
We can use the Pythagorean theorem to find the magnitude of V:
|V| = sqrt((83.0 mi/h)^2 + (37.0 mi/h)^2) ≈ 91.0 mi/h
To find the angle θ, we can use trigonometry:
tan θ = (37.0 mi/h)/(83.0 mi/h) ≈ 0.446
θ ≈ 23.1°
Therefore, the angle at which the airplane must be crabbed is approximately 23.1° relative to the centerline of the runway. This means that the airplane will have to point slightly into the wind in order to maintain a straight path relative to the ground along the runway.
Learn more about Velocity from given link
https://brainly.com/question/80295
#SPJ1
The four quantum numbers, the principal quantum number (????), the angular momentum quantum number (????), the magnetic quantum number (m????), and the spin quantum number (ms) have strict rules which govern the possible values. Identify all allowable combinations of quantum numbers for an electron. ????=2, ????=0, m????=0, ms=0 ????=5, ????=1, m????=−1, ms=+1/2 ????=4, ????=3, m????=4, ms=−1/2 ????=3, ????=−1, m????=0, ms=+1/2 ????=3, ????=3, m????=−1, ms=−1/2 ????=3, ????=0, m????=0, ms=−1/2
For an electron, the only possible quantum number combinations are
n = 2, l = 0, ml = 0, ms = 0 and n = 5, l = 1, ml = -1, ms = +1/2
The four quantum numbers describe the properties of an electron in an atom. According to the rules of quantum mechanics, each quantum number can take on only certain values, and each combination of quantum numbers corresponds to a unique electron state.
Let's examine each of the given combinations of quantum numbers and determine whether they are allowable for an electron:
1) n = 2, l = 0, ml = 0, ms = 0
This combination of quantum numbers is allowable. The principal quantum number n = 2, which corresponds to the second energy level. The angular momentum quantum number l = 0, which corresponds to an s orbital. The magnetic quantum number ml = 0, which indicates that the electron is in an s orbital with no orbital angular momentum. The spin quantum number ms = 0, which indicates that the electron has zero spin angular momentum.
2) n = 5, l = 1, ml = -1, ms = +1/2
This combination of quantum numbers is allowable. The principal quantum number n = 5, which corresponds to the fifth energy level. The angular momentum quantum number l = 1, which corresponds to a p orbital. The magnetic quantum number ml = -1, which indicates that the electron is in a p orbital with one unit of orbital angular momentum along the z-axis. The spin quantum number ms = +1/2, which indicates that the electron has one-half unit of spin angular momentum along the z-axis.
3) n = 4, l = 3, ml = 4, ms = -1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l cannot be greater than n - 1, so l = 3 is not allowed for n = 4.
4) n = 3, l = -1, ml = 0, ms = +1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l must be a non-negative integer less than or equal to n - 1, so l = -1 is not allowed for n = 3.
5) n = 3, l = 3, ml = -1, ms = -1/2
This combination of quantum numbers is not allowable. The angular momentum quantum number l cannot be greater than n - 1, so l = 3 is not allowed for n = 3.
6) n = 3, l = 0, ml = 0, ms = -1/2
This combination of quantum numbers is allowable. The principal quantum number n = 3, which corresponds to the third energy level. The angular momentum quantum number l = 0, which corresponds to an s orbital. The magnetic quantum number ml = 0, which indicates that the electron is in an s orbital with no orbital angular momentum. The spin quantum number ms = -1/2, which indicates that the electron has negative one-half unit of spin angular momentum along the z-axis.
For more such questions on quantum numbers
https://brainly.com/question/2292596
#SPJ4
What is the power in a circuit that has a current of 12 A and a resistance of 100 Ω? (Note: 1 A2·Ω = 1 W)
The power through a circuit is the product of the current and voltage through the circuit. The power in the circuit with 12 A current and 100 ohm resistance is 14400 W or 14.4 kW.
What is power ?Power in a circuit is the product of the voltage across the circuit and the current through it. Power is a scalar quantity and it can defined as the rate of work done.
P = IV,
according to Ohm's law, V = IR
Where I is current R is the resistance.
Then, P = I²R.
Given, I = 12 A
R = 100 Ω
then, P =( 12 A )² × 100 Ω = 14400 W = 14.4 kW.
Therefore, the power in the circuit is 14.4 kW.
Find more on power:
https://brainly.com/question/12870653
#SPJ9
the electric potential energy of a system of two point charges is proportional to
a. The distance between the two charges.
b. The square of the distance between the two charges.
c. The inverse of the distance between the two charges.
d. The inverse of the distance between the two charges.
e. The inverse of the square of the distance between the two charges.
"The electric potential energy of a system of two point charges is proportional to the inverse of the distance between the two charges."Correct option is either C or D.
The equation for potential energy is PE = M G H, where M is mass, G is the gravitational force, and H is the height at which the item is situated. Potential energy is essentially the energy of the body due to its location or its compressed state. The joule is the SI unit for potential energy.
The work that needs to be done to transfer a unit charge from one point to another is the electric potential difference between the two points.
Mathematically, electric potential energy is given as V = k q/r.
where,
k is Coulomb's constant
q is charge
r is distance between charges
If the two charges are of the same type, either positive or negative, the electrical potential energy is positive; otherwise, it is negative. This makes sense if you think of the change in the potential energy ΔU as you bring the two charges closer or move them farther apart.
To know more about electrical potential energy:
https://brainly.com/question/12645463
#SPJ4
the air pressure in a tank is measured using an inclined manometer whose arm is inclined 45 degree from the horizontal line. the densities of the air and water are 1.225 kg/m3 and 1000 kg/m3, respectively. determine the gauge pressure of air in the tank. The asmopheric pressure is 100 kPa. Assume the gravitational acceleration is 9.8 m/s2
With the manometer reading and the ambient pressure, one may calculate the gauge pressure of the air in the tank.
What is the gauge pressure of air in the tank?The fundamental idea underlying the manometer is that the height difference of a fluid column between two sites can be used to calculate the pressure difference between them.
In this instance, the manometer consists of a U-shaped tube that is connected to the tank and is filled with water.
The gauge pressure of air in the tank is calculated using the equation:
P = (ρgH)/(ρa sin45°),
where P is the gauge pressure, ρg is the density of the water in the manometer, H is the difference in height between the two manometer legs, ρa is the density of the air in the tank, and sin45° is the sine of the angle of the manometer arm.
Plugging in the given values, we get:
P = ((1000 kg/m3)(9.8 m/s2)(H))/((1.225 kg/m3)(sin45°))
P = (9.8H)/(1.225)
Therefore, the gauge pressure of air in the tank is equal to (9.8H)/(1.225) kPa.
To calculate the atmospheric pressure, we need to subtract the atmospheric pressure from the gauge pressure. Therefore, the atmospheric pressure of air in the tank is equal to (9.8H)/(1.225) - 100 kPa.
Learn more about gauge pressure here:
https://brainly.com/question/29341536
#SPJ4
The function of the ossicles in the middle ear is to transmit the vibrations of the tympanic membrane caused by sound waves propagated in air to the fluid-filled cochlea. In doing so, the ossicles change the nature of the vibrations. The ear tries to conserve the energy in the wave I,
The magnitude of the change in amplitude (A) that occurs as the sound wave is transmitted from air to water through the middle ear is approximately 14.14 times the initial amplitude.
The conservation of energy in a wave is expressed by the equation:
Av^2ρ = constant
where A is the amplitude, v is the velocity, and ρ is the density of the medium through which the wave is propagating.
Before reaching the middle ear, the sound wave is propagating through air. Therefore, we can use the density and velocity of air to determine the initial value of A.
Initial amplitude (A₁) = constant / (v₁^2ρ₁)
where v₁ = 331 m/s and ρ1 = 1.3 x 10^-3 g/cm^3 = 1.3 kg/m^3
Converting units to SI units:
ρ₁ = 1.3 kg/m^3
A₁ = constant / (331^2 x 1.3) = constant / 142921.0
After passing through the middle ear, the sound wave is transmitted to the fluid-filled cochlea, which in this case, we can assume is water. Therefore, we can use the density and velocity of water to determine the final value of A.
Final amplitude (A₂) = constant / (v₂^2ρ₂)
where v₂ = 1410 m/s and ρ₂ = 1.0 g/cm^3 = 1000 kg/m^3
Converting units to SI units:
ρ₂ = 1000 kg/m^3
A₂ = constant / (1410^2 x 1000) = constant / 1.989 x 10^9
To calculate the magnitude of the change in A, we can take the ratio of the final amplitude to the initial amplitude:
A₂ / A₁ = (constant / (1410^2 x 1000)) / (constant / 142921.0) = (142921.0 x 1410^2 x 1000) / 1.989 x 10^9
A₂ / A₁ ≈ 14.14
Learn more about amplitude here
brainly.com/question/9525052
#SPJ4
The given question is incomplete, the complete question is:
The function of the ossicles in the middle ear is to transmit the vibrations of the tympanic membrane caused by sound waves propagated in air to the fluid-filled cochlea. In doing so, the ossicles change the nature of the vibrations. The ear tries to conserve the energy in the wave I,
where v is the wave speed, ρ is the density of the medium, ν is the frequency of the wave and A is the amplitude of the wave.
Calculate the magnitude of the change in A that occurs. The density of air and water is 1.3x10–3g/cm3 and 1.0g/cm3, respectively, and the velocity of sound is 331 m/s in air and 1410 m/s in water. The frequency of the wave remains constant as the wave propagates
Muscular endurance is the amount of force that can be exerted by a single contraction of the muscle.
False: The amount of force that can be exerted by a single muscle contraction determines muscular endurance.
What is muscular endurance?
Different from the notion of strength training, cardiovascular endurance or cardiorespiratory endurance refers to the sort of muscle endurance used during cardiovascular fitness exercises like running, swimming, or cycling.The body's energy systems, muscle fibres, and capillaries are developed by endurance training for these kinds of physical activity, such as marathon running or 100-mile bicycle rides.To know more about muscular endurance, click the link given below:
brainly.com/question/11006931
#SPJ4
What is VLSI used for?
VLSI has applications in multiple electronic devices such as digital camera and other gadgets.
VLSI is the abbreviation for Verly large scale integration. It is a technology which is utilised to develop parts of electronic devices such as chips or microprocessors.
The technology aids development of multiple chips on a single chip yielding efficient component occupying less space. The application of VLSI is visible in safety systems, chips in graphic card or phone, medical electronic systems and embedded processors.
Learn more about VLSI -
https://brainly.com/question/14417084
#SPJ4
A measured sample of argon gas has a volume of 20. 0 l at a pressure of 660 mm hg. What is the final volume if the pressure is decreased to 550 mmhg?.
Therefore, if the pressure is reduced to 550 mm Hg, the ultimate capacity is 24 liters.
The final volume, if the pressure is lowered to 550 mm Hg, is 24 liters, according to Boyle's law. An experimental gas law known as Boyle's law explains how a gas's pressure declines as its volume rises. The assertion can be summed up as follows: at constant temperature and gas volume, the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to its mass.
It can be expressed as follows mathematically:
PV=K or P x 1/V. For a given mass of gas, the equation asserts that the product of pressure and volume is constant, and the equation is valid as long as
P₁V₁=P₂V₂,
V₂=660×20/550=24 liters.
Learn more about volume Visit: brainly.com/question/1437490
#SPJ4
What is negative in unit circle?
The negative is In the unit circle, a point is negative if it falls in the left half of the circle.
The unit circle is a circle of degree 1 with 0 near the origin of the direction plane. It is used most mathematically to describe the sine and cosine of a point on the unit circle about a point, origin, and focus, described by a positive rotation on the x-axis. Unit: Won. This is because the x-coordinate of the point is negative and the y-coordinate is positive. A point on the right half of the circle is considered positive because it has a positive x-coordinate and a positive y-coordinate.
The rotation around the x center is neither positive nor negative, and the base around the y center is positive in the top half and negative in the bottom half.
To learn more about negative in unit circle, refer:
https://brainly.com/question/18002348
#SPJ4
Acceleration describes how an object’s velocity is changing. Which of the following scenarios provides the best example of an accelerating object?A car driving at a constant speedA book sitting on top of a high shelfA toy train traveling in a circleA toy boat floating in a bathtub
The scenario that provides the best example of an accelerating object is a toy train traveling in a circle.
The rate at which the velocity of an object changes over time is referred to as its acceleration. This implies that an item is accelerating in either the direction in which its velocity is increasing or decreasing, depending on the situation. An object that is accelerating, in contrast to an object that is travelling at a constant velocity, will not have a consistent change in position every single second.
At other times, the velocity of an item that is accelerating will change by the same amount with each passing second. Because the velocity is changing at a steady rate with each passing second, this phenomenon is referred to as a constant acceleration. It is important not to confused an object that maintains a constant acceleration with an object that maintains a constant velocity. An object is considered to be accelerating if there is a change in its velocity, regardless of whether that change is a fixed amount or a variable quantity. Furthermore, an object that is moving at a steady speed is not accelerating.
Thus, the best example of an accelerating object is a toy train traveling in a circle.
To learn more about acceleration, click here:
https://brainly.com/question/13154163
#SPJ4
A car starts from rest on a curve with a radius of 150 m and tangential acceleration of 1.3 m/s2 .Through what angle will the car have traveled when the magnitude of its total acceleration is 3.0 m/s2 ?
We can start by using the formula for tangential acceleration:
a_t = r * α
How to use tangential acceleration ?where a_t is the tangential acceleration, r is the radius of the curve, and α is the angular acceleration. Rearranging this equation, we get:α = a_t / r = 1.3 m/s^2 / 150 m = 0.00867 rad/s^2
Next, we can use the formula for the magnitude of total acceleration:a_total = √(a_t^2 + a_c^2)
where a_c is the centripetal acceleration. We can rearrange this equation to solve for a_c:
a_c = √(a_total^2 - a_t^2) = √(3.0^2 - 1.3^2) = 2.5 m/s^2
Now, we can use the formula for centripetal acceleration:a_c = r * ω^2
where ω is the angular velocity. Rearranging this equation, we get:
ω = √(a_c / r) = √(2.5 m/s^2 / 150 m) = 0.1155 rad/s
Finally, we can use the formula for angular displacement:
θ= ω^2 * t / 2
where t is the time elapsed. Since the car starts from rest, we can use the formula for initial velocity and acceleration:v_i = 0
a = a_t
to find the time it takes for the car to reach the required total acceleration of 3.0 m/s^2:
a = (v_f - v_i) / t
t = (v_f - v_i) / a
t = v_f / a
where v_f is the final velocity. Using the formula for final velocity and the fact that the car starts from rest, we get:
v_f^2 = 2 * a_t * θ
v_f = √(2 * a_t * θ)
t = √(2 * θ / a_t)
Substituting the values we have calculated, we get:t = √(2 * θ / 1.3) = √(1.5385 * θ)
t = v_f / a = √(2 * a_t * θ) / a_t = √(2 * θ / 1.3)
Setting these two expressions for t equal to each other, we get:
√(1.5385 * θ) = √(2 * θ / 1.3)
Squaring both sides and solving for θ, we get:
θ = 4.89 radians
Therefore, the car will have traveled through an angle of 4.89 radians when the magnitude of its total acceleration is 3.0 m/s^2.
To know more about tangential acceleration , check out :
https://brainly.com/question/11476496
#SPJ4
what is the smallest planet of the inner planets and look very much like earth's moon?
The smallest planet among the inner planets is Mercury. It is the closest planet to the sun and has a diameter of approximately 4,880 km, which is just over one-third the size of Earth.
What is more about Mercury ?Mercury is also the second densest planet in the solar system, after Earth.
Mercury's surface is heavily cratered, similar to the surface of the Earth's moon. This is because both Mercury and the moon lack an atmosphere and do not have active geological processes that could smooth out their surfaces. The temperature on Mercury's surface can reach over 400 degrees Celsius during the day and drop to -170 degrees Celsius at night, due to its proximity to the sun and lack of atmosphereMercury also has a very eccentric orbit, meaning that its distance from the sun varies widely over the course of its year. Its orbital period is just 88 Earth days, which means it experiences just one and a half days for every year. Due to its small size and proximity to the sun, Mercury is difficult to observe from Earth and has only been visited by two space probes, Mariner 10 and Messenger.To know more about Mercury , check out :
https://brainly.com/question/24257702
#SPJ4
Three objects having the same mass begin at the same height, and all move down the same vertical distance H. One falls straight down, one slides down a frictionless inclined plane and one swings on the end of a string.
(a) In which case does the object have the biggest total work done on it by all forces during its motion?
i) Free Fall
ii) Incline
iii) String
iv) Same
Two things have comparable densities if they have the same mass. The acceleration is determined by multiplying the gravity velocity by the sine of the angle for a flat incline of angle degrees.
Is motion without friction possible?It is possible to move without friction! An object will appear to be moving even though it is fixed inside one reference frame in which it is moving relative to the other. Friction is therefore not at all necessary for motion.
Can momentum and kinetic be the same for two objects of differing masses?If a heavy particle and a light particle are traveling at the same speed, the heavy particle has lot of kinetic energy. As a result, the two bodies' kinetic energy and momentums will be equal.
To know more about acceleration visit :
https://brainly.com/question/12550364
#SPJ4
3. Your glasses are dropped from the Grand Canyon. Find the distance after 4.5 seconds.
A-44.1 m
S-99.25 m
D- 4.13 m
A-198.45 m
The distance after 4.5 seconds is
101.275 m.How to find the distanceThe distance a falling object travels can be calculated using the equation:
distance = initial velocity x time + (1/2) x acceleration x time^2
Since the object was dropped, its initial velocity is zero, and the acceleration due to gravity is approximately 9.8 m/s^2.
Plugging in the values:
distance = 0 x 4.5 + (1/2) x 9.8 x 4.5^2
distance = 0 + (1/2) x 9.8 x 20.25
distance = 101.275 m
Learn more about distance at:
https://brainly.com/question/26046491
#SPJ1
An electron moves from point i to point f, in the direction of a uniform electric field. During this motion:.
While traveling from one place to another in a uniform electric field, the electron performs negative work, which raises the electron's potential energy.
What do we mean by uniform electric field ?
There are uniform electric fields between charged plates. The lines of the electric field in the area between the plates would be evenly spaced if positive and negative charged plates were arranged facing one another. The field's strength would remain constant in size. The term "uniform electric field" describes this.
The force that would be acting on a positive charge would be pointed in that direction by the electric field. Due to its negative charge, an electron will flow in the opposite direction of the electric field. The field exerts positive force on the positive charge if it moves in the field's direction. The field performs positive work on the charge if the negative charge moves in the opposite direction of the field. The field exerts negative effort on the negative charge if it moves in the field's direction.
To learn more about electric field use link below:
https://brainly.com/question/14372859
#SPJ4