Which properties do all solids share?
A. Color and fixed shape
B. Color and fixed volume
C. Fixed volume and fixed shape
D. Fixed shape; volume that depends on container
Answer:
c
Explanation:
because when you hold a solid in your hand does it move does it shift no it stays the same so it doesn't take the form of the container it's in cuz that's a liquid.
What is the formula of the compound vanadium(V) oxide? Use the list of polyatomic ions and the periodic table to help you answer.
A.
VO2
B.
VO5
C.
V5O2
D.
V2O5
E.
V2O2
Answer:
d
Explanation:
Answer:
D. V2O5
Plato Userssssss
For the reaction Halg) + 12/8) = 2HI(g), K = 50.2 at 445°C. If
[H2] - [62] - [HI] = 1.75 x 10 Mat 445°C, which of the
following is true based on the above?
Qc
equilibrium
Qc - Kc, the reaction is currently at equilibrium
Qc > Kc, the reaction proceeds from left to right to reach
equilibrium
QC > Ke the reaction proceeds from right to left to reach
equilibrium
C) Qc < Kc, the reaction proceeds from left to right to reach equilibrium
Further explanationGiven
K = 50.2 at 445°C
[H2] = [I2] = [HI] = 1.75 × 10⁻³ M At 445ºC
Reaction
H2(g) + I2(g) ⇔2HI(g)
Required
Qc
Solution
Qc for the reaction
[tex]\tt Qc=\dfrac{[HI]^2}{[H_2][I_2]}\\\\Qc=\dfrac{(1.75.10^{-3})^2}{1.75.10^{-3}\times 1.7\times 10^{-3}}=1[/tex]
Qc < Kc ⇒ reaction from left(reactants) to right (products) (the reaction will shift on the right) until it reaches equilibrium (Qc = Kc)
he amount of sun that an area receives affects the movement of water through the water cycle, which is illustrated below.
water cycle diagram
Which of the following processes in the water cycle is most directly caused by water absorbing energy from the sun?
Group of answer choices
precipitation
condensation
evaporation
runoff
Answer:
evaporation
Explanation:
The process of evaporation is as a result of water absorbing energy from the sun.
The process is a phase change in which liquid water changes into gaseous form.
The water in gaseous form is called vaporThis water cools and condenses in the atmosphere as it loses the energy it has gained. For evaporation to take place, water must absorb energy from the sun or other heating bodies. This will then cause vaporization of the liquid water into a gaseous form.From the formula, write the correct name for the ionic compound. MgBr₂ KCl Al₂S₃ BeCl₂ MgCl₂ GaN CaO BaO AgBr 10. NaF SrS LiCl AlP CsI
Explanation:
For binary ionic compound, the compound is named by first writing the cation followed by the anion. The names of the compounds are;
MgBr₂ - Magnesium Bromide
KCl - Potassium Chloride
Al₂S₃ - Aluminium Sulphide
BeCl₂ - Berylium Chlride
MgCl₂ - Magnesium Chloride
GaN - Gallium Nitride
CaO - Calcium Oxide
BaO - Barium Oxide
AgBr - Silver Bromide
NaF - Sodium Flouride
SrS - Strontium Sulphide
LiCl - Lithium Chloride
AlP - Aluminium Phosphide
CsI - Caesium Iodide
Elements that are most similarities are located in the same...?
Answer: In the same Group
Explanation: Elements in the same group (row going down) have the same number of valance electrons. These valance electrons dictate their chemical properties and how they react with other elements/compounds.
Three quantum numbers are derived from Schrodinger’s equation that describe the probability of finding an electron around a nucleus: the principal quantum number, the angular momentum quantum number, and the magnetic quantum number. Explain each quantum number, including associated shapes, numbers, letters and values.
(please help)
Answer:
Principal Quantum Number (n) = energy level (1s2)
Angular Momentum Quantum Number (l) = sub-shell (1s2)
Magnetic Quantum Number (mi) = specific orbital electron occupies
range of (n) = 1-7
range of (I) = s, p, d , f
Explanation:
Answer:
Principal Quantum Number: designates the principal electron shell. Angular Momentum Quantum Number-This quantum number determines it's shape of an orbital and thus it's angular distribution. This quantum number determines the number of orbital numbers, their orientation within the sub-shell.
Principal Quantum Number, n
It describes the size of its orbital and of the main energy level. It is represented by n. Where, n = 1,2,3,4....stands for K, L, M, N shell and so on..
ngular Momentum Quantum Number l
It describes the shape of the orbital and thus the angular distribution. It can take from 0 to (n - 1). That is l = 0,1,2,...,(n - 1)
The magnetic Quantum Number, m
It describes the orientation of the orbitals. It is represented as . The value of this quantum number ranges from . When l = 2, the value of will be -2, -1, 0, +1, +2.
Explanation:
The table below shows the elements that mainly comprise each of the four layers of Earth:
Elements in Layers
Layer Main Elements
Crust Oxygen, Silicon
Mantle Iron, Magnesium
Outer Core Iron, Nickel
Inner Core Iron
Which of these elements make up the layer that is 0.2 to 1.1 percent of Earth's total diameter?
Magnesium and Silicon
Iron and Magnesium
Iron and Nickel
Oxygen and Silicon
Answer:
The answer is oxygen and silicon
Explanation:
I took the test and it was right
The answer is oxygen and silicon
Explain how a light can be seen when sent through a colloid mixture, but not a solution.
i have 5 minutes pls help
Find the volume of oxygen with a density of 0.001331 g/ml that has a mass of 250.0 g.
Answer:
187,828.7 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{250}{0.001331} \\ = 187828.70025...[/tex]
We have the final answer as
187,828.7 mLHope this helps you
A system does 125 J of work and cools down by releasing 438 J of heat. The change in internal energy is ____________ J.
Given that,
Work done by the system = 125 J
Energy released when it cools down = 438 J
To find,
The change in internal energy.
Solution,
As heat is released by the system, Q = -438 J
Work done by the system, W = -125 J
Using the first law of thermodynamics. The change in internal energy is given by :
[tex]\Delta U=Q-W\\\\=-438-125\\\\=-563\ J[/tex]
So, the change in internal energy is 563 J.
how does a tiny seed turn into a tree overtime?
Answer:
A group of cells ready to form roots a stem and the first leaves
Usually the number of protons matches the number of?
Answer:
Electrons
Explanation:
If the grass contains 220,000 kcal of energy, who much energy will be available to the owl?
Answer:
Generally, consumers only receive 10% of the energy from what they eat. So, if the grass had 220,000 kcal of energy, then the cow would receive 10% of that - 200kcal. And then when a human eats the cow, it will only receive 10% of the cow's energy. This is because within a food chain, energy is lost as organisms use their energy to survive - like moving and producing heat (if endothermic). So consumers do not get 100% of their food's energy. Hope this helps a little.
Explanation:
whats the answer giving brainliest :))))
Answer:
D
Explanation:
Because B and C are talking about the climate. And A is just saying something general about the climate! :)
Answer:
d
Explanation:
A diagram represents the life cylce of a frog. The diagram shows that, in a frog...
1) methods of sexually reproduction depends on the species
2) metabolism is the sum of all chemical reactions
3) body structures change during development
4) Offspring always look like the adult
PLEASE HELP AND ANSWER
Answer:
I think 1 option ok basically I am a scientist
Answer:
(3)
Explanation:
Which factors Cause Earth to experience seasons? Check all that apply
Answer:
what are the options to the question
Answer:
b and c
Explanation:
just took it on edge :)
The scientific method is a that can be used to answer any . The process begins when a scientist makes an . Then, they do to learn more about the topic and write a . The scientist will and conduct an , eventually coming to a . They will share their with other scientists to help further discovery
Answer:
The scientific method is a process that can be used to answer any questions . The process begins when a scientist makes an observation. Then, they do research to learn more about the topic and write a hypothesis. The scientist will make predictions and conduct an experiment, eventually coming to a conclusion. They will share their results with other scientists to help further discovery.
Explanation:
The Scientific method is process used to observe, predict and explain phenomena around us. It involves a series of steps listed as follows:
1. Making observations: the scientist must be a keen observer of events around him
2. Ask questions: the scientist asks questions based on the observations
3. Form a hypothesis and make predictions: the scientist puts forward a reasonable explanation for the observations known as hypothesis. Predictions are then made and tested upon.
4. Experimentation: experiments are conducted to test the hypothesis and the predictions made.
5. Analysis of data and conclusion: the result of the experiments are analysed and conclusion are then drawn.
6. Communication of results: the results obtained from the experiments are then shared with other scientists to aid further research and discoveries.
two workers used a force of 100 N to move a sofa 4 meters in 2 seconds how much power
Answer:
200 watts
Explanation:
First we have to find total work:
W =F(d)
W = 400J
Then plug that answer into the Power formula.
P = W/(t_f-t-i)
P = 400/2s
P = 200 W
One effect of uncontrolled diabetes is that the blood might develop an acidic pH. As a result, cells may not be able to regulate their internal pH. Within these cells, this could cause a disruption of the function of biological catalysts known a
When carbon is completely combusted in the presence of oxygen the only product produced is carbon dioxide as shown in the following equation, C+O2——>CO2 If 12 grams of carbon are burned, how many grams of carbon dioxide will be produced?
Answer:
C.44g is that one okkkkkkkkkkkkkkkk
Ralph wanted to breed a pea plant that produced only purple flowers. He continued to breed purple-flowers producing pea plants together over six generations. The results of Ralph's artificial selection are shown above. What did artificial selection do the population of pea plants?
Answer:
B
Explanation:
Number of purple flowers
Number of white flowers
1
705
224
2
792
189
3
834
102
4
889
84
5
938
21
6
952
0
Ralph wanted to breed a pea plant that produced only purple flowers. He continued to breed purple-flower producing pea plants together over six generations. The results of Ralph's selective breeding are shown above. What did the selective breeding do to the population of pea plants?
A. increased its genetic diversity
B. decreased its genetic diversity
C. caused a new species of pea plant to form
D. caused a pea plant to exhibit a new characteristic
The correct answer would be that selective breeding decreased the genetic diversity of the population of the pea plants.
The genetic diversity of a population can be viewed as the number of genes in the gene pool of the population.
With each successive generation, more purple-flowered and less white-flowered pea plants were being produced until the 6th generation when only purple-flowered pea plants were produced. The ratio of the purple color gene to that of white color kept increasing until there was no longer a white color gene in the population. Hence, the genetic diversity of the population was decreased by the selective breeding.
The correct option is B
In the above picture a solid aluminium rod is being heated by a flame. Explain the main reason why Glob
of wax A melts first.
TE from the candle moves through the air and Glob A feels the heat first
TE from the candle transfers particle to particle by touch through the rod to the wax
TE from the candle is carried by particles as they flow though the rod to the wax.
TE travels up as heat rises to the wax
Answer:
TE from the candle is carried by particles as they flow though the rod to the wax.
Explanation:
AS Of Jahuary 2009, the USA has produced 60,000 metric tons of nuclear waste in 60 years of operating 104
nuclear power plants.
On average, how much waste is produced by each plant on a monthly basis?
O0.8tons per month
O83.3 tons per month
104 tons per month
O 866.3 tons per month
Waste produced by each plant : 0.8 tons per month
Further explanationGiven
60,000 metric tons of nuclear waste in 60 years of operating 104
nuclear power plants.
Required
Waste produced
Solution
60,000 metric tons=60 years, so in one year :
[tex]\tt \dfrac{60,000}{60}=1000~metric~tons[/tex]
1000 metric tons/year = 83.33 metric tons/month
For each plant :
[tex]\tt \dfrac{83.33}{104}=0.8[/tex]
Answer:
A. 0.8 tons per month
Explanation:
Edge 2020
Solve it plz?tttttttttttttttttttt
help me pleaseee, if you do tyy :)
Select all the correct answers.
In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H,S() =2H() + S(g)
O It increases with an increase in the concentration of S-(g).
OIt decreases with a decrease in the concentration of H().
OIt increases with a decrease in the concentration of H-(g).
It decreases with an increase in the concentration of S,().
It decreases with increase in the concentration of Ha().
The correct answers :
It increases with a decrease in the concentration of H₂(g).
It decreases with an increase in the concentration of S₂(g).
It decreases with an increase in the concentration of H₂(g).
Further explanationForward reaction : rate to form product
In equilibrium :
The product decreases ⇒ system will move from left to right(forward reaction)
The product increases ⇒ system will move from right to left(reverse reaction)
Why does francium react more violently than lithium?
Which of the following is a physical change:
a. turning solid sodium to and chlorine gas to salt
b. forming a mixture
c. food turning into waste in the intestines
d.burning wood
What colour will red litmus paper turn if calcium hydroxide and water reacted?
do you want me to try it?
Answer:
Explanation:
blue for base.
Red for ____. What it goes red when in an acidic compound (like coke or pepsi).
So Ca(OH)2 is a base. That means it will turn blue.