how many grams of sucrose, c12h22o11, must be added to 500 g of water at 100c to change the vapor pressure to 752 mmhg?

Answers

Answer 1

To change the vapor pressure to 752 mmHg, 27.8 g of sucrose (C12H22O11) must be added to 500 g of water at 100C.

Vapor pressure of a solution is affected by the presence of solutes in the solution. The relationship between vapor pressure lowering and concentration of a non-volatile solute in a solvent is described by Raoult's law.

It states that the vapor pressure of a solution is equal to the mole fraction of the solvent multiplied by the vapor pressure of the pure solvent, P₀. Hence, Pᵥ = P₀ x Xw

where, Pᵥ = vapor pressure of the solution Xw = mole fraction of the solvent P₀ = vapor pressure of the pure solvent

Therefore, P₀ - Pᵥ = P₀ x (1 - Xw)

This equation can be used to calculate the vapor pressure lowering of a solution relative to the pure solvent. By definition, the mole fraction of the solvent is given by

Xw = number of moles of solvent / total number of moles of solute and solvent.

Since we assume that the volume of the solution is 500 g of water + m g of sucrose, where m is the mass of sucrose, we can write

0.752 atm x 760 mmHg / atm = P₀ x (500 g / (500 g + m))

m= 27.8g

Therefore, we have m = 27.8 g of sucrose.

To know more about vapor pressure, refer here:

https://brainly.com/question/11864750#

#SPJ11


Related Questions

what should you do with unused chemicals? group of answer choices dispose of them as instructed on the safety sheet return to their original containers throw away with regular trash dump them down the sink

Answers

The best thing to do with unused chemicals is to dispose of them as instructed on the safety sheet. This may involve returning the chemicals to their original containers or throwing them away with the regular trash. Never dump unused chemicals down the sink, as this could be hazardous to the environment and to your health.
Unused chemicals should be disposed of as instructed on the safety sheet. It is important to dispose of chemicals in a safe and responsible manner to avoid harm to the environment and human health.

What are chemicals?

Chemicals are substances that are made up of molecules, which are made up of atoms. Chemicals can be found in nature or synthesized by humans. Chemicals have a wide range of uses, from pharmaceuticals to household cleaning products.

Why should you dispose of unused chemicals as instructed on the safety sheet?

Unused chemicals can pose a hazard if they are not disposed of correctly. Many chemicals are hazardous and can be dangerous to human health and the environment if they are not disposed of properly. Chemicals that are poured down the drain or thrown in the trash can contaminate the environment and cause harm to animals and humans. Examples of hazardous chemicals are corrosive, flammable, reactive, and toxic. It is essential to follow the safety sheet's instructions on how to dispose of unused chemicals to protect the environment and human health. In addition, it is important to ensure that unused chemicals are not mixed with other chemicals, as this can cause a dangerous reaction.

For more information follow this link: https://brainly.com/question/30970962

#SPJ11

A refrigeration system reaches operational balance when the number of vapor molecules that condense into liquid equals the number of vapor molecules that the compressor pumps into the condenser.
a. True
b. False

Answers

In refrigeration, the refrigerant is a substance that absorbs heat from the surrounding and dissipates it to produce cooling. The correct option is a. True.

What is thermal balance?

The thermal balance in a refrigeration system is achieved when the system has reached a stable state, that is, the amount of heat absorbed by the refrigerant is equal to the heat rejected by the refrigeration system. During the compression process, the refrigerant is compressed and pumped into the condenser where it undergoes condensation, i.e., it changes from a gas to a liquid by releasing heat.

In the condenser, the refrigerant rejects the heat that it absorbed in the evaporator and releases it to the surrounding. The condensation process reduces the number of vapor molecules in the refrigerant, which leads to an increase in the number of liquid molecules.

Therefore, the number of vapor molecules that condense into liquid equals the number of vapor molecules that the compressor pumps into the condenser. This is because the compressor has to maintain a constant flow of refrigerant in the refrigeration system to achieve thermal balance.

Hence, the statement is a) true.

To know more about Thermal balance:

brainly.com/question/16749661

#SPJ11

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble

Answers

An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.

Therefore, option b. NaOH is correct option.

An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.

Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.

As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.

for such more question on amine

https://brainly.com/question/9631835

#SPJ11

For E2 elimination reactions to occur, chair conformations of halocyclohexanes must have both the H and the X atoms in _____ positions

Answers

For E2 elimination reactions to occur, chair conformations of halocyclohexanes must have both the H and the X atoms in axial positions. The E2 elimination reaction is a type of elimination reaction that is dependent on the substrate and the strength of the base used. It is a bimolecular process that happens when two molecules, the substrate, and the base, collide with each other.

The E2 reaction is a one-step process in which the leaving group and the hydrogen ion are lost from the substrate at the same time, resulting in the formation of a pi bond. In a halocyclohexane molecule, there are two positions for the H and X atoms, axial and equatorial.

However, in order for the E2 reaction to occur, the H and X atoms must be in axial positions so that they are in the same plane as the leaving group. This ensures that the hydrogen ion and the leaving group can be lost from the substrate at the same time, resulting in the formation of a pi bond.

Know more about  elimination reactions here:

https://brainly.com/question/29695970

#SPJ11

what is the theoretical absolute minimum number of molar equivalents one could use in a sodium borohydride reduction of a ketone like camphor?

Answers

The theoretical absolute minimum number of molar equivalents for a sodium borohydride reduction of a ketone like camphor is 1.

This is because sodium borohydride reduces ketones by forming an intermediate complex with the ketone, which then undergoes a boron-carbon bond cleavage to form an alkoxide and hydride ion. The hydride ion can then be abstracted from the alkoxide to form the alcohol product. Therefore, one equivalent of sodium borohydride is necessary to reduce one equivalent of ketone.

Learn more about molar equivalents: https://brainly.com/question/17153656

#SPJ11

what substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics?

Answers

A substrate concentration of 10-100 mM is sufficient to achieve zero-order kinetics.

The substrate concentration utilized in enzymatic analyses to ensure zero-order kinetics is a high substrate concentration.

A high substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics.

Zero-order kinetics refers to the reaction rate's independence on the substrate concentration's magnitude when the substrate concentration is significantly greater than the enzyme concentration in the reaction.

Kinetic behavior is when the reaction rate is constant and not dependent on substrate concentration.

Thus, a substrate concentration that is 10- to 20-fold higher than the enzyme concentration, that is around 10-100 mM is used to achieve zero-order kinetics.

Learn more about substrate concentration here:

brainly.com/question/29238037

#SPJ11

Write the formula for the conjugate acid of each of the following bases.Express your answer as a chemical formula.a)C2H5NH2b)ClO4-c)HPO42-d)HCO3-

Answers

Conjugate acid forms by adding H+ to a base, making a species with a positive charge. Strength depends on the base's strength. Important in acid-base reactions.

The conjugate acid of a base is the species that is formed when a proton (H+) is added to the base molecule. It has one more proton than the base and will have a positive charge. The strength of the conjugate acid depends on the strength of the original base, with the conjugate acid of a weak base being a weak acid, and the conjugate acid of a strong base being a weak acid. The formulas for the conjugate acids of the given bases are C2H5NH3+ for C2H5NH2, HClO4 for ClO4-, H2PO4- for HPO42-, and H2CO3 for HCO3-. Understanding conjugate acids is important in acid-base chemistry because it helps to explain the behavior of acids and bases in chemical reactions.

learn more about conjugate acid here:

https://brainly.com/question/30164261

#SPJ4

is it ever possible to have a strong acid with a ph that is higher than a weak acid?

Answers

No, a strong acid cannot have a pH that is greater than that of a weak acid with the same concentration. A solution's acidity is determined by its pH, with lower pH values suggesting higher acidity.

When an acid is dissolved in water, strong acids totally dissociate into ions, whereas weak acids only partially do so. The concentration of hydrogen ions (H+) in the solution will still be higher than that of a strong acid of the same concentration, even if a weak acid has only partially dissociated. Because an acid's propensity to give protons determines how strong it is, an acid with a larger concentration of H+ ions in solution will have a lower pH value.A weak acid with the same concentration cannot have a pH that is higher than a strong acid. When a weak acid partially dissociates into ions, it will have a lower concentration of H+ ions and a higher pH than a strong acid of the same concentration. The concentration of hydrogen ions in a solution affects its pH.

learn more about strong acid  here:

https://brainly.com/question/31143763

#SPJ4

Suppose you make a calibration curve as described in the pre-lab information and get a linear equation in the form of y = mx +b. Assuming the path length is 1 cm, what is represented by the "y" in the equation? concentration molar absorptivity absorbance path length

Answers

The "y" in a calibration curve using the formula y = mx + b stands for a solution's absorbance (or optical density). The quantity of light at a specific wavelength that a material absorbs is measured by its absorbance, which is directly proportional to both.

the substance's concentration in solution and the length of the light's passage through the solution. The wavelength of maximum absorbance of the material being evaluated determines the molar absorptivity, a constant, whereas the path length is the distance that light travels through the solution, often stated in centimetres. Thus, the "y" variable in the equation y = mx + b reflects the solution's absorbance that is being measured.The absorbance (or optical density) of the solution being tested is represented by the "y" variable in the equation y = mx + b. The quantity of light at a specific wavelength that is absorbed by a material in solution is measured by its absorbance, which is directly proportional to both the substance's concentration and the length of the light's passage through the solution.

learn more about calibration curve here:

https://brainly.com/question/29729322

#SPJ4

In a recrystallization, the crystals do not always form spontaneously after cooling, even though the solution is supersaturated. Which of the following will help crystals form? More than one answer may be correct.
1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent.
2. Add a scrap of paper to nucleate the crystals.
3. Add some crystals of the compound you are trying to crystallize.
4. Add some crystals of any kind.
5. Scrape the outside of the Erlenmeyer flask with a glass rod.

Answers

To help the crystals form, these three options are correct- 1. Scrape the inside of the Erlenmeyer flask with a glass rod below the surface of the solvent. 2. Add a scrap of paper to nucleate the crystals. 3. Add some crystals of the compound you are trying to crystallize.

What is crystallization?

Crystallization is the process of a solid material forming a structured arrangement of its particles, typically resulting in a highly ordered and often repeating pattern. This can be seen in the formation of solid crystals such as salt, sugar, and diamonds. Crystallization occurs when molecules of the solid tend to organize themselves into a more ordered pattern.

How adding a scrap of paper to nucleate the crystals will result in formation of crystals?

Adding a scrap of paper to nucleate the crystals is a process known as seeding. Seeding involves introducing a small crystal into a container of supersaturated solution, which then provides a nucleus for additional crystals to form around. This process accelerates the growth of the crystals and can be used to create larger, more consistent crystals. It can also be used to create crystals with specific shapes and sizes. The addition of a scrap of paper encourages the solution to form around it, helping to encourage the formation of crystals.

To know more about Erlenmeyer flask, visit:

https://brainly.com/question/10261429

#SPJ1

calculation and give the answers to the correct number of significant figures.
Part A
1.72×10−3/7.9×1021.72×10−3/7.9×102
Express your answer to the correct number of significant figures.
Activate to select the appropriates template from the following choices. Operate up and down arrow for selection and press enter to choose the input value typeActivate to select the appropriates symbol from the following choices. Operate up and down arrow for selection and press enter to choose the input value type
nothing
SubmitRequest Answer
Part B
1.98×10−2+1×10−4−3.5×10−31.98×10−2+1×10−4−3.5×10−3
Express your answer to the correct number of significant figures.
Activate to select the appropriates template from the following choices. Operate up and down arrow for selection and press enter to choose the input value typeActivate to select the appropriates symbol from the following choices. Operate up and down arrow for selection and press enter to choose the input value type
nothing
SubmitRequest Answer
Part C
[(1.38×105)(0.000318)/0.080](115.2)[(1.38×105)(0.000318)/0.080](115.2)
Express your answer to the correct number of significant figures.

Answers

The answer is 2.19×10−2 with three significant figures. The correct number of significant figures is determined by the data with the least amount of significant figures, which in this case is 0.080.

What is figure?

Figure is a term that is used to describe a shape, design, pattern, or form. It can also be used to refer to a diagram or an illustration. Figures are used to explain and illustrate concepts, facts, and phenomena in various fields of study, including mathematics, science, and the humanities. Figures are also used in art, design, and architecture to create visual compositions that have a certain aesthetic appeal. They can be used to represent ideas, concepts, and emotions.

Since 0.080 has three significant figures, the answer must also be rounded to three significant figures.

To learn more about figure
https://brainly.com/question/29827869
#SPJ1

The answer is 2.19×10⁻² with three significant figures. The correct number of significant figures is determined by the data with the least number of significant figures, which in this case is 0.080.

What is figure?

Figure is a term that is used to describe a shape, design, pattern, or form. It can also be used to refer to a diagram or an illustration. Figures are used to explain and illustrate concepts, facts, and phenomena in various fields of study, including mathematics, science, and the humanities. Figures are also used in art, design, and architecture to create visual compositions that have a certain aesthetic appeal. They can be used to represent ideas, concepts, and emotions.

Since 0.080 has three significant figures, the answer must also be rounded to three significant figures.

To learn more about figure, visit:

brainly.com/question/29827869

#SPJ1

a coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. for example in the balanced equation below the coefficient in front of the h2o is 2, meaning 2 molecules of h2o are reacting to make 2 molecules of h2 and 1 molecule of o2. 2 h2o --> 2 h2 o2 what is the coefficient that goes in front of the eca in the reaction below. e3bc4 d(ca)2 --> d3(bc4)2 eca

Answers

The balanced equation of the given reaction is: e₃bc₄ + d(ca)₂ --> d₃(bc₄)₂ + 3eca.

Hence, the coefficient that goes in front of the eca in the reaction is 3.

What is a balanced equation of a given reaction?

A balanced equation is a chemical equation in which the number of atoms of each element is equal on both the reactant and product sides. In other words, the total mass and charge are conserved in a chemical reaction.

For example, consider the following unbalanced equation for the reaction between hydrogen gas and oxygen gas to form water:

H2 + O2 → H2O

This equation is unbalanced because the number of hydrogen and oxygen atoms is not the same on both sides of the equation.

To balance the equation, we need to adjust the coefficients in front of the reactants and products to make the number of atoms of each element equal on both sides:

2H2 + O2 → 2H2O

Now the equation is balanced because there are two hydrogen atoms and two oxygen atoms on both the reactant and product sides.

Learn more about balanced equations of reactions at: https://brainly.com/question/26694427

#SPJ1

What is the name of this compound CH3CH(CH3)CH3

Answers

The Correct option is A, The IUPAC name of the compound CH3–CHCH3–CO–CH3 is 3-methyl-2-butanone.

In chemistry, a compound is a substance formed by the chemical combination of two or more different elements in fixed proportions. The atoms in a compound are held together by chemical bonds, which can be covalent, ionic, or metallic depending on the nature of the elements involved.

Compounds have unique physical and chemical properties that are different from their constituent elements. For example, water is a compound formed by the chemical combination of hydrogen and oxygen in a fixed ratio of 2:1 by mass. While hydrogen is a highly flammable gas and oxygen is necessary for combustion, water is a non-flammable liquid that is essential for life.

There are many different types of compounds, including organic and inorganic compounds. Organic compounds are those that contain carbon atoms, while inorganic compounds do not. Examples of organic compounds include sugars, proteins, and fats, while examples of inorganic compounds include salt, water, and carbon dioxide.

To learn more about Compound visit here:

brainly.com/question/19458442

#SPJ4

Complete Question:

The IUPAC name of the compound CH3–CHCH3–CO–CH3 is

A 3-methyl-2-butanone

B 2-methyl-3-butanone

C Isopropyl methyl ketone

D 2ethyl-2methyl pentane

inhibitory post-synaptic potentials (ipsps) group of answer choices result in local hyperpolarization prevent the efflux of potassium ions increase membrane permeability to sodium ions result in local depolarization

Answers

Inhibitory post-synaptic potentials (IPSPs) are a group of answer choices that result in local hyperpolarization. The IPSPs help prevent the efflux of potassium ions and increase the membrane permeability to chloride ions.

When a neurotransmitter binds to a receptor on the post-synaptic neuron, the ion channels open to allow ions to pass into or out of the neuron.

The IPSPs are caused by the opening of chloride ion channels or potassium ion channels. This hyperpolarizes the neuron and makes it less likely to fire an action potential.

Potassium ions have a crucial role in the generation of IPSPs. They are responsible for maintaining the resting potential of the neuron.

When the ion channels open, potassium ions leave the cell, making the interior more negative, resulting in hyperpolarization. This makes it harder for the neuron to fire an action potential.

IPSPs are essential in controlling the firing rate of neurons in the central nervous system. They can also help prevent seizures and other unwanted excitatory activity.

IPSPs are often used in combination with other synaptic potentials, such as excitatory post-synaptic potentials (EPSPs), to fine-tune the activity of the neuron.

to know more about hyperpolarization refer here:

https://brainly.com/question/12982897#

#SPJ11

Give the approximate bond angle for a molecule with a tetrahedral shape.
90o
105o
109.5o
120o
180o

Answers

A molecule with a tetrahedral shape has an approximate bond angle of 109.5 degrees.  The correct option is 3.

This is due to the arrangement of the four electron pairs around the central atom, which maximizes the distance between them to minimize repulsion and achieve a stable configuration. In a tetrahedral molecule, the central atom is located at the center of a tetrahedron, with four surrounding atoms or lone pairs located at each of the tetrahedron's vertices. The four bonds or lone pairs form a tetrahedral arrangement around the central atom, with bond angles of 109.5 degrees between them. Examples of tetrahedral molecules include methane (CH4) and carbon tetrafluoride (CF4). Option 3 is correct.

To know more about tetrahedral molecule, here

brainly.com/question/13849344

#SPJ4

--The complete question is, Give the approximate bond angle for a molecule with a tetrahedral shape.

1. 90o

2. 105o

3. 109.5o

4. 120o

5. 180o ---

A solution contains a total concentration of molecules [A]tot of 5.345 x 10-5 mol/l and a total concentration of molecules [B]tot of 1.245 x 10-4 mol/l. The dissociation constant for the complex AB is 2.208 x 10-6 mol/l. Part A - Concentration of AB in equilibrium Determine the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the solution.

Answers

The equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B is 0.003026 mol/l.

Why equilibrium concentration is 0.003026 mol/l.?

The equilibrium concentration of the heterodimeric complex AB formed by the molecules A and B in the given solution can be determined using the dissociation constant for the complex AB and the total concentrations of molecules A and B provided in the problem statement.

The dissociation constant for the complex AB is given by Kd = [A][B]/[AB]

where [A] and [B] are the concentrations of the individual molecules A and B and [AB] is the concentration of the complex AB at equilibrium.

Rearranging this equation gives [AB] = [A][B]/Kd.

Substituting the given values of [A], [B], and Kd in the above equation,

we get: [AB] = (5.345 x 10⁻⁵mol/l) x (1.245 x 10⁻⁴mol/l)/(2.208 x 10⁻⁶mol/l)

[AB] = 0.003026 mol/l

Therefore, the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the given solution is 0.003026 mol/l.

Learn more about equilibrium concentration

brainly.com/question/13043707

#SPJ11

which of the following pairs of aqueous solutions will form a precipitate when mixed? which of the following pairs of aqueous solutions will form a precipitate when mixed? mgcl2 koh li2s hbr k2co3 hno3 hbr lioh all of these solution pairs will produce a precipitate.

Answers

The pair of aqueous solutions that will produce a precipitate when mixed is K2CO3 & HNO3.

The precipitate is a solid substance that separates from a solution after mixing with another solution.

Precipitation reactions are those in which two aqueous solutions, which are known as reactants, create an insoluble solid product, known as a precipitate.

The pair of aqueous solutions that will produce a precipitate when mixed is: K2CO3, HNO3

In this pair of aqueous solutions, the potassium carbonate (K2CO3) is an ionic compound with a metal and non-metal.

When potassium carbonate is dissolved in water, it dissociates into K+ and CO3^2- ions.

Nitric acid (HNO3) is an aqueous solution of hydrogen ions and nitrate ions. These two solutions will react to form a precipitate of potassium nitrate (KNO3).

Here's the chemical equation for this precipitation reaction: K2CO3 (aq) + 2HNO3 (aq) → 2KNO3 (aq) + H2O (l) + CO2 (g)

To know more about precipitate, refer here:

https://brainly.com/question/29762381#

#SPJ11

Identify the location of alkali metals, transition metals, non-metals, metalloids, halogens, and inert gases in the periodic table.

Answers

Alkali metals are located in group 1A of the periodic table.Transition metals are located in groups 3-12 of the periodic table.Non-metals are located in groups 16-18 of the periodic table.Metalloids are located in between groups 2 and 3 of the periodic table.Halogens are located in group 7A of the periodic table.Inert gases are located in group 8A of the periodic table.

In summary, alkali metals are located in group 1A, transition metals are located in groups 3-12, non-metals are located in groups 16-18, metalloids are located in between groups 2 and 3, halogens are located in group 7A, and inert gases are located in group 8A of the periodic table.

Alkali metals are located in Group 1 of the periodic table. These elements have one valence electron, which they readily lose to form positive ions. Transition metals occupy the central portion of the periodic table. These elements are characterized by their variable oxidation states and the formation of colored compounds.

Non-metals are located to the right of the zigzag line on the periodic table. These elements have low melting points and are poor conductors of heat and electricity. Metalloids are located on either side of the zigzag line on the periodic table. These elements have intermediate properties between metals and non-metals.

Halogens are located in Group 17 of the periodic table. These elements are highly reactive and readily form negative ions. Inert gases, also known as noble gases, are located in Group 18 of the periodic table. These elements are characterized by their lack of reactivity and full valence shells.

Learn more about periodic table here:

brainly.com/question/11155928

#SMJ11

Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y

Answers

When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.

The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.

Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.

Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.

As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.

Learn more about molar solubility here:

brainly.com/question/28170449

#SPJ11

during the synthesis of salicylic acid, methanol and sodium sulfate are given off as byproducts of the reactions. during which steps of the synthesis are these compounds separated from the final product? explain.

Answers

During the synthesis of salicylic acid, methanol and sodium sulfate are given off as byproducts of the reactions. To separate these compounds from the final product, distillation is typically used.

During the distillation process, the boiling point of the desired product (salicylic acid) is different from the boiling points of the unwanted compounds (methanol and sodium sulfate). The distillation process vaporizes and separates the components, allowing the desired compound (salicylic acid) to be collected. Methanol and sodium sulfate are two byproducts of salicylic acid synthesis. Methanol is used as a solvent for salicylic acid, and sodium sulfate is used as a drying agent to extract the water from the product after the acid has been synthesized.

Salicylic acid is less soluble in methanol than in water, so it can be separated from the solution by filtration. The solution is then washed with water to remove any remaining traces of methanol. The filtrate containing the methanol and sodium sulfate is collected in a separate container.

Therefore , Methanol can be recovered by distillation .Hence these compounds  separate from the final product by distillation .

To know more about Distillation refer here:

https://brainly.com/question/29416097

#SPJ11

If four molecules of carbon dioxide enter the Calvin cycle (four "turns" of the cycle), how many G3P molecules are produced and how many are exported? a. 4 G3P made, 1 G3P exported b. 4 G3P made, 2 G3P exported c. 8 G3P made, 1 G3P exported d. 8 G3P made, 4 G3P exported

Answers

If four molecules of carbon dioxide enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported is d. 8 G3P made, 4 G3P exported.

The Calvin cycle is the collection of chemical reactions that occur in chloroplasts during photosynthesis. The Calvin cycle transforms CO2, using the energy from ATP and NADPH produced in the light reactions, into the sugar G3P. Three G3P molecules are created for every three CO2 molecules that enter the cycle. Every G3P molecule has three carbon atoms. If four molecules of CO2 enter the Calvin cycle (four "turns" of the cycle), eight G3P molecules are produced, and four G3P molecules are exported.

In the first step of the Calvin cycle, three CO2 molecules are combined with three RuBP molecules to form six 3-PGA molecules, which are then converted into six G3P molecules. However, five of the six G3P molecules must be recycled into RuBP so that the cycle can continue. As a result, only one G3P molecule out of the six created is exported from the cycle. So, every four CO2 molecules that enter the Calvin cycle create two G3P molecules that are exported out of the cycle.

Learn more about calvin cycle at:

https://brainly.com/question/30668606

#SPJ11

what is melting point 9 10-dihydroanthracene-9 10-α β-succinic anhydride?

Answers

The melting point of 9,10-dihydroanthracene-9,10-αβ-succinic anhydride is 200-205°C. 9,10-dihydroanthracene-9,10-αβ-succinic anhydride is a product of the reaction of 9,10-dihydroanthracene with maleic anhydride.

The temperature at which a substance transitions from a solid to a liquid state is known as its melting point (or, less frequently, liquefaction point). The solid and liquid phases are in equilibrium at the melting point. Pressure affects a substance's melting point, which is typically reported at a standard pressure such 1 atmosphere or 100 kPa. The freezing point or crystallisation point is the point at which a substance reverses its state from liquid to solid. Due to a substance's capacity for supercooling, the freezing point might frequently appear to be lower than it actually is.

This compound is classified as an anhydride because it is made up of two carbonyl groups that are both linked to oxygen atoms. It has a molecular weight of 280.30 grams per mole. Furthermore, the compound's melting point is 200-205°C.The chemical reaction that produces 9,10-dihydroanthracene-9,10-αβ-succinic anhydride.

This reaction produces 9,10-dihydroanthracene-9,10-αβ-succinic anhydride, which is a white solid. It has a molecular weight of 280.30 grams per mole, and its melting point is 200-205°C.

For more such questions on melting point , Visit:

https://brainly.com/question/40140

#SPJ11

Identify the Lewis acid and Lewis base in each of the reactions. - C1- + AICI3 --> AICI4- ____ _____- BF3 +F- --> BF4-____ _____- NH3 + H+ --> NH4+____ _____

Answers

Each reaction's Lewis acid and Lewis base are as follows:

AlCl3 is the Lewis acid in the reaction, whereas Cl- is the Lewis base. F- is the Lewis base and BF3 is the Lewis acid in the reaction Cl- + AlCl3 --> AlCl4- BF3 + F- --> BF4-

The Lewis base in this reaction is NH3, and the Lewis acid is H+. NH3 + H+ --> NH4+

Explanation: A Lewis acid acts as an electron pair acceptor in a Lewis acid-base reaction, whereas a Lewis base acts as an electron pair donor. In the initial reaction, Cl- provides AlCl3 with a pair of electrons, which AlCl3 accepts to produce AlCl4-. As a result, AlCl3 is the Lewis acid and Cl- is the Lewis base. In the subsequent response, F- provides two pairs. BF3 takes the electrons and transforms them into BF4-. Hence, the Lewis bases are F- and BF3, respectively. In the third reaction, H+ absorbs a pair of electrons from NH3 and forms NH4+ as a result. As a result, the Lewis bases are NH3 and H+.

learn more about Lewis acid  here:

https://brainly.com/question/15570523

#SPJ4

describe the chemistry of biurets reagent, explaining how it works and, specifically, why you used absorbance of 550 nm to quantify protein concentration.

Answers


Biurets reagent is a solution of potassium hydroxide and copper sulfate used to measure the concentration of proteins. The reagent works by breaking down peptide bonds and creating a pink or purple solution when proteins are present. The absorbance of 550 nm is used to quantify the protein concentration because it is the wavelength that best corresponds to the color change of the solution.


Biurets reagent is a solution containing copper sulfate, sodium hydroxide, and potassium sodium tartrate. The copper ions in the biuret reagent combine with the peptide bonds present in proteins, forming a violet-colored complex. The intensity of the violet coloration is proportional to the concentration of proteins in the sample being analyzed. Absorbance at 550 nm is used to quantify protein concentration because this is the wavelength at which the violet color produced by the copper ion-peptide bond complex has maximum absorbance. By measuring the absorbance at this wavelength, the concentration of the protein in the sample can be determined through a standard curve that relates the absorbance values to known protein concentrations. The biuret test is commonly used to determine protein concentration in a variety of biological and chemical samples. The test is widely used because it is relatively simple and can be performed quickly. The biuret test is often used in combination with other analytical techniques to obtain more detailed information about protein samples.

For more information follow the link: https://brainly.com/question/4596250

#SPJ11

please answer that, ​

Answers

Each of the functions in column A will be performed by their respective hormones. Each of the hormones in the human body has a different function.

What is a hormone?

A hormone is a chemical substance that is produced by a gland or a group of cells and is transported by the bloodstream to target cells or organs in the body. They are produced by endocrine glands.

To answer your question:

1. Needed by the body tor water reabsorption - Parathormone2. Needed by the body to increase blood calcium level - Calcitonin3 . Needed by the body to increase one's height - Somatotropin4. Needed by the body to combat insomnia - Endorphin5 . Needed by the body to shield the body from UV rays - Melanocyte SH6 . Needed by the body for proper metabolism - Thyroxine7 . Needed by the body to reduce physical pain or injury - Endorphin8 . Needed by the body to reduce symptoms of stress - Melatonin9 . Needed by the body to develop boy's sex characteristics - Androgen1 0 . Needed by the body to lower blood sugar level - Glucagon



To know more about hormones, visit:

https://brainly.com/question/24383458

#SPJ1

what are two benefits and one drawback of using models to represent scientific processes?

Answers

Two benefits of using models to represent scientific processes are that they can simplify complex systems and make predictions about how the system will behave. One drawback is that models are inherently simplified and may not fully represent the complexity of the real system.

How are models used in scientific research?

Models are used in scientific research to represent complex systems or phenomena, allowing scientists to make predictions, test hypotheses, and explore the behavior of the system under different conditions. Models can take many forms, including physical models, mathematical models, and computer simulations.

What are some examples of scientific models used in different fields of science?

Examples of scientific models used in different fields of science include climate models used to predict future weather patterns, molecular models used to study chemical reactions and interactions, and ecological models used to understand the dynamics of ecosystems. Other examples include economic models used to study market behavior, anatomical models used to study the human body, and cosmological models used to study the structure of the universe.

Learn more about ecosystems here:

https://brainly.com/question/13979184

#SPJ1

acid strength decreases in the series: hi (strongest), hbr, hcl hf (weakest) each acid has its conjugate base, i-, br-, cl-, f-, respectively. which is the weakest base?

Answers

The weakest base is F-. The series of acids arranged in the decreasing order of their strengths are H1, HBr, HCl, and HF.

Their corresponding conjugate bases arranged in the decreasing order of their strengths are I-, Br-, Cl-, and F-.Thus, F- is the weakest base. It is because the series arranged in the decreasing order of their basic strengths are I-, Br-, Cl-, and F-. The basic strength of the anion decreases from top to bottom of the periodic table due to the decreasing electronegativity of the element to which the anion is attached.

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

Study the drawing of the combination electrode you will make in this experiment and answer the following questions. What are the components of the reference and of the working electrodes? What is the function of the attached string? How must the string be placed so that it functions properly?

Answers

The combination electrode in the given drawing is made up of a reference electrode and a working electrode.

What are the components of the reference and of the working electrodes?

The working electrode in the given combination electrode is made up of a platinum wire. The platinum wire is coated with platinum black. This is the black substance on the lower part of the platinum wire in the given drawing.

The reference electrode is made up of a silver wire that is coated with silver chloride. A small amount of KCl solution is placed in the tube at the top of the silver wire.

What is the function of the attached string?

The string that is attached to the combination electrode is used to immerse the electrode in a solution. It is attached to the top of the reference electrode. The string also acts as a support to prevent the combination electrode from sinking into the solution being measured.

How must the string be placed so that it functions properly?

The string should be attached to the top of the reference electrode. When the combination electrode is immersed in the solution, the string should be at the top so that the electrode does not sink into the solution being measured.

See more about electrode in:

https://brainly.com/question/17362810

#SPJ11

Calcium carbonate, CaCO3, is able to remove sulfur dioxide, SO2, from waste gases by a reaction in which they react in a 1: 1 stoichiometric ratio to form equimolar amounts of CaSO3. When 255 g of CaCO3 reacted with 135 g of SO2, 198 g of CaSO3 were formed. Determine the percentage yield of CaSO3

Answers

The percentage yield of CaSO3 is approximately 69%.

CaCO3 + SO2 → CaSO3 + CO2

Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol

Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol

Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:

Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g

Percentage yield = (Actual yield / Theoretical yield) x 100%

The actual yield is given as 198 g. Plugging in the values, we get:

Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.

Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.

For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.

Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.

To learn more about Stoichiometric visit here:

brainly.com/question/6907332

#SPJ4

Two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting. Which of the following statements must be true about them as they move closer together? (There could be more than one correct choice.)
a. Their kinetic energy keeps increasing.
b. Their acceleration keeps decreasing.
c. Their kinetic energy keeps decreasing.
d. Their electric potential energy keeps decreasing.
e. Their electric potential energy keeps increasing.

Answers

When two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting, then their kinetic energy keeps increasing, acceleration keeps decreasing, kinetic energy keeps decreasing, electric potential energy keeps decreasing.

How does the electrostatic force act?

The electrostatic force is a force that arises between electrically charged objects. It is the force exerted on a charged particle by other charged particles or electromagnetic fields. It is a fundamental force in nature that has an infinite range and can be either attractive or repulsive. The strength of the electrostatic force is proportional to the inverse square of the distance between the charged particles. As two charged particles move closer together, the force between them increases. Therefore, as the two protons move closer together, their kinetic energy and electric potential energy will increase.

According to Coulomb's law, the electrostatic force is inversely proportional to the square of the distance between the two charges. Therefore, as the distance between the two protons decreases, the electrostatic force acting between them will increase. As a result, their acceleration will keep decreasing. At the same time, as the protons move closer together, their kinetic energy will keep increasing while their electric potential energy will keep decreasing.

Learn more about Electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

Other Questions
if thee electron at the surface of the negative plate were released from rest, what would be its velocity Increases in the amount of human capital in the economy tend to ________ real incomes because they increase the ________ of labor.a. decrease, bargaining powerb. increase, productivityc. decrease, productivityd. increase, bargaining power 1. what were the reasons for the emergence of a new form, modern dance, very early in the 20th century. The amount of energy derived from an electric source, commonly measured in volts is called Can yall explain how to do this really dont get it please thank you Write the expression in complete factoredform.3a(a + 1) + x(a + 1) Communication is the exchange of information. Responses TrueFalse The ____ are parasitic and infect with special cells called sporozoites. a) ciliates b) dinoflagellates c) apicomplexans d) Giardia. e) apicomplexans. in the context of pay influencing turnovers, which of the following is a result of too little pay? group of answer choices higher individual performance among employees feelings of unfair treatment among employees more employees requesting for training employees finding the company more attractive hydroxyapatite makes up part of which component of the bony matrix? Question 6 of 10Based only on the information given in the diagram, which congruencetheorems or postulates could be given as reasons why ACDE AOPQ?Check all that apply.AAA. AASB. ASAC. LLOD. HLE. LAF. SAS Sort each item as a characteristic of respiration, fermentation, or both Characteristics(9 items) (Drag and drop into the appropriate area below) NADH major electron carrier Electrons reduce an external electron acceptor (e.g., O2). Important for catabolism of sugars Most carbon remains in organic form Pyruvate is major intermediate. Most carbon released as CO Process Respiration Fermentation Both Drag and drop here Drag and drop here Drag and drop here Check the terms that fit into the science category biology. Select all that apply Plants Water Light Air Animals Land Solar system Sound the treaty of versailles formally blamed germany for the war. this phrase is known as the which of the following are required to compute the present value of a known future amount? (select all that apply.)multiple select question.market valuedatenumber of compounding periodsfuture valueinterest rate We always see the same side of the Moon because a. the Moon does not rotate on its axis. b. the Moon rotates on its axis once for each revolution around Earth. c. when tWe always see the same side of the Moon becausea. the Moon does not rotate on its axis.b. the Moon rotates on its axis once for each revolution around Earth.c. when the other side of the Moon is facing Earth, it is unlit.d. when the other side of the Moon is facing Earth, it is on the opposite side of Earth.e. none of the above Required information Breach of Contract and Remedies When one party fails to perform as agreed, the Uniform Commercial Code (UCC) defines that fallure as a breach of contract and makes a distinction between a total breach and a partial breach. The UCC also provides recourse for the nonbreaching party to recover damages. The alternative recourses are known as remedies and certain relief is available for specific types of breaches. Roll over the item to read a hint about what type of damages best matches the item. Then click and drag each item to its correct category of damages. Prevents unjust enrichment Compensatory Fixed amount of damages Consequential Prevents unjust enrichment Restitution Actual damages suffered by nonbreaching party Liquidated Foreseeable indirect losses Fixed amount of damages Actual damages suffered by nonbreaching party Foreseeable indirect losses the following terms are often confused, despite having different political meanings. match each term to its definition. Asmaris is a developing nation in Africa. Its government recently formulated a free trade policy and opened doors to foreign investment in the country. Abdu, an economist, believes that Asmaris is now an emerging market. Which of the following statements supports Abdu's argument that Asmaris is an emerging market? A. The citizens of Asmaris have an intermediate income level. B. Asmaris has a high degree of globalization. C. Asmaris has a high level of economic stability. D. The average economic growth of Asmaris is around 2 percent/year. Can someone pls help!! A 29-g rifle bullet traveling 210 m/s embeds itself in a 3.2-kg pendulum hanging on a 2.9-m-long string, which makes the pendulum swing upward in an arcPart ADetermine the vertical component of the pendulum's maximum displacementPart BDetermine the horizontal component of the pendulum's maximum displacement.