n = m/M = 2/18 = 1/9 ~0,1 mol
Answer:
.111 mole (using 3 significant digits)
Explanation:
Mole weight of H2O = 2 x 1.008 + 15.999 = 18.015 gm/mole
2 gm / 18.015 gm/mole = .111 mole
(2pts) Select the limiting reagent Choose isopentyl alconol acetic acid (3pts) Isopentyl acetate theoretical yield (grams) (Zpts) Isopertyl acetate obtained (grams) (Zpts) Isopentyl acetate percent yield (Zpts) Isopentyl acetate boiling poirit (lit) (Zpts) Isopentyl alcohol boiling point (lit) (1Opts) Post Lab Questions (Spts) Upload picture 0f your drawn separation scheme for isopentyl acetate from the reaction mixture
The key points and tasks mentioned in the paragraph include selecting the limiting reagent, calculating the theoretical and obtained yield of isopentyl acetate, determining the percent yield, noting the boiling points of isopentyl acetate and isopentyl alcohol.
What are the key points and tasks mentioned in the given paragraph related to the experiment with isopentyl acetate?In the given paragraph, several points are mentioned related to the experiment involving isopentyl acetate.
The paragraph asks for the selection of the limiting reagent, calculation of the theoretical yield and obtained yield of isopentyl acetate, determination of the percent yield, boiling points of isopentyl acetate and isopentyl alcohol, and post-lab questions.
Additionally, it requests the upload of a picture showing the drawn separation scheme for isopentyl acetate from the reaction mixture.
These points are part of a lab experiment or assignment where students are expected to perform calculations, analyze results, and provide a separation scheme diagram.
Learn more about isopentyl acetate
brainly.com/question/29756493
#SPJ11
From each of the following pairs, choose the nuclide that is radioactive (One is known to be radioactive, the other stable.) Explain your choice 102 a 47 189 47 bMg. 2Nc 10 203 c 81 275 90
The radioactive nuclide from each pair is:
a) 102 a 47
c) 81 275 90
In pair (102 a 47 vs. 189 47 bMg), the nuclide with atomic number 102 is known to be unstable and radioactive, while the nuclide with atomic number 189 is stable. This is because nuclides with atomic numbers higher than 83 tend to be unstable due to the large number of protons in the nucleus, which creates a strong repulsive force between them.
In pair (203 c vs. 81 275 90), the nuclide with atomic number 90 is known to be unstable and radioactive, while the nuclide with atomic number 81 is stable. This is because nuclides with atomic numbers higher than 82 tend to be unstable due to the large number of protons in the nucleus, which makes it difficult to maintain a stable ratio of neutrons to protons. Therefore, 81 275 90 is the radioactive nuclide in this pair.
To know more about atomic visit
https://brainly.com/question/1770619
#SPJ11
Draw the lewis dot structure for the ligand. Include all lone pairs and radicals.
NH2CH2CH2NHCH2CO2-
The Lewis dot structure for the ligand NH2CH2CH2NHCH2CO2- can be constructed by assigning valence electrons to each atom and arranging them to satisfy the octet rule.
How can the Lewis dot structure for the ligand NH2CH2CH2NHCH2CO2- be drawn?The Lewis dot structure for the ligand NH2CH2CH2NHCH2CO2- can be constructed by assigning valence electrons to each atom and arranging them to satisfy the octet rule.
Starting with the nitrogen atom, it has five valence electrons and forms single bonds with three hydrogen atoms and one carbon atom. The carbon atom is also bonded to another carbon atom and an oxygen atom, which carries a negative charge (-1).
The oxygen atom has six valence electrons and forms a double bond with the carbon atom, also having one lone pair of electrons.
The structure can be represented as:
H
|
H - N - C - C - O(-)
|
H
In this structure, all atoms have satisfied the octet rule, and lone pairs and radicals have been indicated where necessary.
Learn more about Lewis dot structure
brainly.com/question/29786124
#SPJ11
A water-Insoluble hydrocarbon A decolorizes a solution of Br2 in CH2Cl2. The base peak in the EI mass spectrum of A occurs at m/z = 67. The proton NMR of A is complex, but integration snows that about 30% of the protons have chemical shifts in the 1.8- 2.2 region of the spectrum. Treatment of A successively with OsO4, then periodic acid. And finally with Ag2O, gives a single dicarboxylic acid B that can be resolved into enantionmers. Neutralization of a solution containing 100.0 mg of B requires 13.7 mL of 0.100 M NaOH solution. Compound B, when treated with POCl3, forms a cyclic anhydride. Give the structures of A and B, Omitting stereochemistry.
The hydrocarbon A is an alkene or an aromatic compound, as it decolorizes Br2 in CH2Cl2 and has a base peak in the EI mass spectrum at m/z = 67.
The dicarboxylic acid B is a cyclic succinic anhydride that can be resolved into enantiomers. The neutralization of 100.0 mg of B requires 13.7 mL of 0.100 M NaOH solution.
The given information suggests that A is a double bond or an aromatic compound, and it contains protons in the 1.8-2.2 ppm range in its proton NMR. The treatment of A with OsO4, periodic acid, and Ag2O yields a single enantiopure succinic anhydride B, indicating that A contains a symmetrical alkene or an aromatic ring.
The amount of NaOH required to neutralize 100.0 mg of B can be used to calculate the molar mass of B and determine its molecular formula. The formation of a cyclic anhydride upon treatment of B with POCl3 suggests that B is a dicarboxylic acid.
For more questions like Hydrocarbon click the link below:
https://brainly.com/question/31643106
#SPJ11
How many liters of H2 will be required at a temperature of 300 K and 3 atm pressure to consume 56 grams of N2? Na +3H2NH
To solve this problem, we need to use the balanced chemical equation: Na + 3H2 → NaH + H2N. This equation tells us that 3 moles of H2 are required to consume 1 mole of N2.
First, we need to calculate the number of moles of N2 in 56 grams. The molar mass of N2 is 28 g/mol, so we have:
56 g N2 / 28 g/mol = 2 moles N2
Since 3 moles of H2 are required to consume 1 mole of N2, we need 6 moles of H2 to consume 2 moles of N2.
Now we can use the ideal gas law to calculate the volume of H2 required at the given temperature and pressure. The ideal gas law is:
PV = nRT
Where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
We know that we need 6 moles of H2, and the temperature and pressure are given. The gas constant R is 0.0821 L*atm/(mol*K). Substituting in these values, we get:
V = nRT/P = (6 mol)(0.0821 L*atm/(mol*K))(300 K)/(3 atm) = 147.78 L
So we need 147.78 liters of H2 at a temperature of 300 K and 3 atm pressure to consume 56 grams of N2.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ11
co-h20 attractions are weaker than co and so4True/False
True. Co-H2O attractions are weaker than Co and SO4 attractions because of their differences in molecular structure and intermolecular forces.
Co (cobalt) is a transition metal with a partially filled d-orbital, which allows it to form coordination complexes with ligands such as H2O and SO4 (sulfate). In these complexes, the Co atom is bonded to the ligands via coordinate covalent bonds, which are relatively strong.
H2O and SO4, on the other hand, are both polar molecules that can form hydrogen bonds and dipole-dipole interactions with other molecules. However, the strength of these intermolecular forces is weaker than the coordinate covalent bonds between Co and its ligands.
This can have important implications in various fields such as chemistry, biology, and materials science, where understanding the strength and nature of intermolecular forces is crucial for predicting and manipulating the properties and behavior of molecules and materials.
For more such questions on molecular structure:
https://brainly.com/question/503958
#SPJ11
True. The CO-H2O attractions are weaker than CO and SO4 due to the smaller electronegativity difference between carbon and oxygen in CO-H2O.
In CO-H2O, the oxygen atom in H2O has a partial negative charge, while the hydrogen atoms have a partial positive charge. Similarly, the carbon atom in CO has a partial positive charge, while the oxygen atom has a partial negative charge. However, in CO-H2O, the electronegativity difference between carbon and oxygen is smaller than that between carbon and sulfur in SO4. This results in weaker CO-H2O attractions compared to CO and SO4. In CO, the electrostatic attraction between the partial negative charge on oxygen and the partial positive charge on carbon is strong. In SO4, the electrostatic attraction between the partial negative charges on the oxygen atoms and the partial positive charge on the sulfur atom is also strong.
Learn more about CO-H2O here:
https://brainly.com/question/16338790
#SPJ11
a mixture of two ideal gases a and b is in thermal equilibrium at 600 k. a molecule of a has one- fourth the mass of a molecule of b and the rms speed of molecules of a is 400 m/s. determine the rms speed of molecules of b.
The root mean square (rms) speed of molecules of gas B is 200 m/s.
What is the rms speed of molecules?Given:
Temperature (T) = 600 K
RMS speed of gas A (vA) = 400 m/s
Mass of gas A (mA) = m
Mass of gas B (mB) = 4m (since molecule A has one-fourth the mass of molecule B)
The RMS speed of a gas is given by the equation:
v = √(3RT / m)
We can compare the RMS speeds of gases A and B using the equation above. Since both gases are at the same temperature, the ratio of their RMS speeds is equal to the square root of the ratio of their masses.
vA / vB = √(mB / mA)
Substituting the given values:
400 / vB = √(4m / m)
400 / vB = √4
400 / vB = 2
vB = 400 / 2 = 200 m/s
Therefore, the RMS speed of molecules of gas B is 200 m/s.
To know more about molecules, refer here:
https://brainly.com/question/30465503#
#SPJ4
Select the incorrect statement regarding the lateral inhibition process:
Group of answer choices
the neuron that sends the message releases the same neurotransmitter and the different reaction on the post synaptic membrane depends on the receptors
Lateral inhibition is helpful in defining a receptive field.
the neuron/s that are inhibited contain receptors that will create IPSP
lateral inhibition applies only to nociception
The incorrect statement regarding the lateral inhibition process is "lateral inhibition applies only to nociception."
Lateral inhibition is a neural process that occurs in various sensory systems and is not limited to nociception (the perception of pain). It involves the communication between neurons in a circuit, where an excited neuron sends inhibitory signals to its neighboring neurons, reducing their activity and enhancing the contrast between the activated neuron and its surroundings.
This process helps to sharpen the perception of sensory information and improve the ability to detect and discriminate sensory stimuli.
The neuron that sends the message releases a neurotransmitter, which interacts with specific receptors on the post-synaptic membrane, generating an inhibitory post-synaptic potential (IPSP).
The conclusion is Lateral inhibition is not limited to nociception, which is the neural process of encoding and processing pain signals. It is a general mechanism that can be found in various sensory systems, such as the visual and auditory systems, and plays a crucial role in refining sensory perception.
To learn more about Lateral inhibition visit:
https://brainly.com/question/28483472
#SPJ11
a) Calculate the fraction of atom sites that are vacant for copper (Cu) at its melting temperature of 1084
∘
C
(1357 K). Assume an energy for vacancy formation of 0.90 eV/atom.
b) Repeat this calculation at room temperature (298 K).
The fraction of atom sites that are vacant for copper at its melting temperature is approximately 1.54 × 10^-5.
The fraction of atom sites that are vacant for copper at room temperature is approximately 2.25 × 10^-17.
(a) At the melting temperature of copper (T = 1357 K), the fraction of atom sites that are vacant can be calculated using the following equation:
f = exp(-Qv / kT)
where Qv is the energy for vacancy formation (0.90 eV/atom), k is the Boltzmann constant (8.62 × 10^-5 eV/K), and T is the absolute temperature (1357 K).
Substituting the values:
f = exp(-0.90 eV/atom / (8.62 × 10^-5 eV/K × 1357 K))
f ≈ 1.54 × 10^-5
(b) At room temperature (T = 298 K), the fraction of atom sites that are vacant can be calculated using the same equation:
f = exp(-Qv / kT)
Substituting the values:
f = exp(-0.90 eV/atom / (8.62 × 10^-5 eV/K × 298 K))
f ≈ 2.25 × 10^-17
Therefore, 2.25 × 10^-17 is the fraction of atom sites that are vacant for copper at room temperature.
For more questions on Boltzmann constant:
https://brainly.com/question/15572777
#SPJ11
a) At the melting temperature of copper (1084 °C or 1357 K), the fraction of atom sites that are vacant can be calculated using the equation:
f = exp(-Qv/kT)
where Qv is the energy for vacancy formation (0.90 eV/atom), k is the Boltzmann constant (8.617 x 10^-5 eV/K), and T is the temperature in Kelvin.
Thus, the fraction of vacancies at the melting temperature of copper is:
f = exp(-0.90/(8.617 x 10^-5 x 1357)) = 0.173 or 17.3%
Therefore, at the melting temperature of copper, about 17.3% of the atom sites are vacant.
b) At room temperature (298 K), the fraction of vacancies can be calculated using the same equation:
f = exp(-Qv/kT)
Substituting the values:
f = exp(-0.90/(8.617 x 10^-5 x 298)) = 1.38 x 10^-6 or 0.000138%
Thus, at room temperature, only a very small fraction (0.000138%) of the atom sites in copper are vacant.
Learn more about 1084 °C or 1357 K here:
https://brainly.com/question/31963861
#SPJ11
Metal X was plated from a solution containing cations of X. The passage of 48.25 C deposited 31mg of X on the cathode. What is the mass of X (in grams) per mole of electrons?
According to the question the mass of X per mole of electrons is approximately 62.12 g/mol, assuming a molar mass of 63.55 g/mol.
To calculate the mass of X (in grams) per mole of electrons, we need to first find the number of moles of electrons that were involved in the plating process. We know that the passage of 48.25 C deposited 31mg of X on the cathode, so we can use Faraday's law to calculate the number of moles of electrons:
1 mole of electrons = 96,485 C
Therefore, 48.25 C = 0.000499 moles of electrons
Next, we need to convert the mass of X deposited into grams per mole. The molar mass of X is not given, so we cannot determine the exact value. However, we can assume that the molar mass of X is roughly equal to the atomic weight of the element. For example, if X is copper, its atomic weight is 63.55 g/mol.
Assuming a molar mass of 63.55 g/mol, we can calculate the mass of X per mole of electrons as follows:
Mass of X per mole of electrons = (31 mg / 0.000499 moles of electrons) / 1000 = 62.12 g/mol
Therefore, the mass of X per mole of electrons is approximately 62.12 g/mol, assuming a molar mass of 63.55 g/mol.
To know more about Metal visit :
https://brainly.com/question/24494907
#SPJ11
which reacts faster, a piece of iron in 1.0 m hcl or an identical piece of iron in 6.0 m hcl? why?
The piece of iron in 6.0 M HCl will react faster than the identical piece of iron in 1.0 M HCl.
The rate of a chemical reaction depends on various factors, including the concentration of reactants. In this case, the 6.0 M HCl has a higher concentration of HCl molecules than the 1.0 M HCl, which means there are more H+ ions available to react with the iron.
Therefore, the higher concentration of HCl in the 6.0 M solution will result in a faster reaction rate compared to the 1.0 M solution. This is supported by the fact that the reaction rate generally increases with increasing concentration of reactants, as long as other factors such as temperature and pressure are constant.
To know more about HCl molecules refer here:
https://brainly.com/question/28217568#
#SPJ11
the rise velocity vb of a bubble with diameter d in a liquid of density p and viscosity u depends on the acceleration due to gravity g and the density difference between the bubble and the fluid
The rise velocity of a bubble, represented as vb, is influenced by various factors, including the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u). However, two critical factors that significantly impact the rise velocity of a bubble are the acceleration due to gravity (g) and the density difference between the bubble and the fluid. The density difference is a result of the relative densities of the gas within the bubble and the liquid it is in. The acceleration due to gravity is a measure of the force of gravity on the bubble and affects its upward motion through the liquid. In summary, the rise velocity of a bubble is determined by the complex interplay of several factors, but the density difference and acceleration due to gravity are two of the most important.
learn more about acceleration due to gravity
https://brainly.in/question/29628267?referrer=searchResults
#SPJ11
The rise velocity of a bubble, represented as vb, is influenced by various factors, such as the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u).
What are the factors that impact the rise velocity of a bubble?The two critical factors that significantly impact the rise velocity of a bubble are
acceleration due to gravity (g) the density difference between the bubble and the fluid.The relative densities of the gas inside the bubble and the liquid it is in are what cause the density difference.
The bubble's upward travel through the liquid is influenced by the acceleration caused by gravity, which is a measurement of the gravity's pull on the bubble.
In conclusion, a complicated interplay of various factors, including the density differential and the acceleration due to gravity, affects a bubble's ascent velocity.
learn more about acceleration due to gravity at:
https://brainly.com/question/12792214
#SPJ4
The pH of a 0.059 M solution of acid HA is found to be 2.36. What is the K of the acld? The equation described by the K value is HA(aq) + H2O(l) ≠ A^-(aq) +H2O^+(aq) Report your answer with two significant figures. Provide your answer below:Ka- ____
The first step to finding the Ka of the acid HA is to write the equation for its ionization: The Ka of the acid HA is 2.8 × 10^-4
HA(aq) + H2O(l) ↔ A^-(aq) + H3O^+(aq)
The equilibrium expression for this reaction is:
Ka = [A^-][H3O^+] / [HA]
We know that the initial concentration of HA is 0.059 M, and the pH of the solution is 2.36. From the pH, we can find the concentration of H3O^+ using the equation:
pH = -log[H3O^+]
2.36 = -log[H3O^+]
[H3O^+] = 10^-2.36 = 4.06 × 10^-3 M
Since the acid HA is a weak acid, we can assume that the concentration of A^- is negligible compared to the concentration of HA. Therefore, we can assume that the concentration of HA is equal to its initial concentration of 0.059 M.
We can plug these values into the equilibrium expression for Ka:
Ka = [A^-][H3O^+] / [HA]
Ka = (0)(4.06 × 10^-3) / 0.059
Ka = 2.75 × 10^-4
Click the below link, to learn more about Ka of acid:
https://brainly.com/question/14620228
#SPJ11
A quantity of a monatomic ideal gas expands to twice the volume while maintaining the same pressure. If the internal energy of the gas were U0 before the expansion, what is it after the expansion?
The internal energy of the gas after the expansion is also U0.
In an ideal gas, the internal energy depends only on its temperature and is independent of the volume and pressure. Therefore, in this scenario, where the monatomic ideal gas expands to twice the volume while maintaining the same pressure, the internal energy remains unchanged.
The internal energy of an ideal gas is given by the equation U = (3/2) nRT, where n is the number of moles, R is the gas constant, and T is the temperature. Since the pressure remains constant during the expansion, according to the ideal gas law, PV = nRT, where P is the pressure and V is the volume.
When the volume doubles, the temperature and the number of moles remain constant. Since the pressure is constant, the internal energy, which is solely determined by temperature, remains unchanged. Therefore, the internal energy of the gas after the expansion is still U0, the same as it was before the expansion.
To learn more about ideal gas law click here
brainly.com/question/12624936
#SPJ11
An experiment requires 24.5 g of ethyl alcohol (density = 0.790 g/mL). What volume of ethyl alcohol, in liters, is required?a. 19.4 × 10^(4) Lb. 3.10 × 10^(–2) Lc. 3.22 × 10^(–5) Ld. 19.4 Le. 1.94 × 10^(–2) L
The closest answer choice is b. 3.10 × 10^(-2) L .The first step in solving this problem is to use the formula:
Density = mass/volume
We are given the density of ethyl alcohol (0.790 g/mL) and the mass required for the experiment (24.5 g), so we can rearrange the formula to solve for volume:
Volume = mass/density
Plugging in the values we have:
Volume = 24.5 g / 0.790 g/mL
Volume = 31.01 mL
However, the question is asking for the volume in liters, not milliliters. To convert from milliliters to liters, we divide by 1000:
Volume = 31.01 mL / 1000 mL/L
Volume = 0.03101 L
The experiment requires 24.5 g of ethyl alcohol with a density of 0.790 g/mL. Using the formula density = mass/volume, we can rearrange to solve for volume and get volume = mass/density. Plugging in the values given, we get a volume of 31.01 mL. However, the question asks for the volume in liters, so we divide by 1000 to get 0.03101 L. Therefore, the answer is (b) 3.10 × 10^(–2) L.
To find the volume of ethyl alcohol required, we will use the formula:
Volume = Mass / Density
Given, Mass = 24.5 g and Density = 0.790 g/mL
Volume = 24.5 g / 0.790 g/mL = 31.013 mL
To convert mL to L, we divide by 1000:
31.013 mL / 1000 = 3.1013 × 10^(-2) L
To know more about Density visit :-
https://brainly.com/question/9381624
#SPJ11
the loncapa computer weighs exactly pounds. if it were completely annihilated and turned directly into energy, how many kilojoules of energy would be released?
The loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.
To determine the amount of energy that would be released if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, we need to use Einstein's equation E=mc².
Here, E represents the energy that would be released, m represents the mass of the computer, and c is the speed of light.
First, we need to convert the weight of the computer into kilograms, since the equation requires mass to be in kilograms.
1 pound = 0.45359237 kilograms
So, the mass of the computer would be:
m = ( pounds) x (0.45359237 kg/1 lb)
m = kg
Now, we can use the equation:
E = mc²
E = ( kg) x (299,792,458 m/s)²
E = kg x 8.98755178736818 × 10¹⁶ m²/s²
E = 8.07679660863197 × 10¹⁷ J
Therefore, if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.
Learn more about Einstein's equation
brainly.com/question/10809666
#SPJ11
calculate the temperature (in°c) at which pure water would boil at a pressure of 508.7 torr. hvap = 40.7 kj/mol enter to 1 decimal place.
The water temperature of a combination, multiply the mass and temperature of the first container by the product of the mass and temperature of the second container.
To calculate the temperature at which pure water would boil at a pressure of 508.7 torr, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (-ΔHvap/R) x (1/T2 - 1/T1)
where P1 is the standard pressure of 1 atm, P2 is the given pressure of 508.7 torr, ΔHvap is the heat of vaporization (given as 40.7 kJ/mol), R is the gas constant (8.314 J/mol*K), T1 is the boiling point of water at 1 atm (100°C or 373.15 K), and we are solving for T2.
First, let's convert the given pressure to atm:
508.7 torr = 0.6705 atm
Now we can plug in the values and solve for T2:
ln(0.6705/1) = (-40.7 x 10^3 J/mol / 8.314 J/mol*K) x (1/T2 - 1/373.15 K)
-0.4057 = -4898.5 x (1/T2 - 0.00268)
1/T2 - 0.00268 = 0.0000828
1/T2 = 0.0027628
T2 = 361.6 K
To convert to °C, we subtract 273.15:
T2 = 88.5°C
Therefore, at a pressure of 508.7 torr, pure water would boil at a temperature of 88.5°C.
So, the boiling point of pure water at a pressure of 508.7 torr is approximately 80.5°C (to 1 decimal place).
To know about Temperature visit:
https://brainly.com/question/11464844
#SPJ11
calculate the ph of the cathode compartment solution if the cell emf at 298 k is measured to be 0.610 v when [zn2 ]= 0.28 m and ph2= 0.92 atm . express your answer
The pH of the cathode compartment solution is 9.16, calculated using the Nernst equation and given concentrations and pressures.
To calculate the pH of the cathode compartment solution, we first use the Nernst equation, which relates cell potential (E), standard cell potential (E°), and concentrations/pressures of species.
In this case, the cell reaction involves Zn2+ ions and H2 gas.
By substituting the given values of cell emf (0.610 V), [Zn2+] (0.28 M), and p(H2) (0.92 atm), we can solve for the H+ ion concentration.
Once the H+ ion concentration is calculated, we use the formula pH = -log[H+] to determine the pH, which comes out to be approximately 9.16.
For more such questions on pressures, click on:
https://brainly.com/question/24719118
#SPJ11
The ph of the cathode compartment solution is 1.74.
The given problem involves the determination of pH of the cathode compartment solution using the measured cell emf. The cell emf measurement is based on the Nernst equation, which relates the cell potential to the concentration of the reactants and products in the cell. The Nernst equation is used to calculate the reduction potential of the cell, which is related to the pH of the cathode compartment solution. Using the given information on the concentration of Zn2+ ions and the partial pressure of H2 gas in the cathode compartment, we can calculate the reduction potential of the cell, and hence the pH of the cathode compartment solution. The final answer is obtained by substituting the calculated values into the Nernst equation.
Learn more about compartment solution here:
https://brainly.com/question/15185712
#SPJ11
a gas mixture in a 1.65- l l container at 300 k k contains 10.0 g g of ne n e and 10.0 g g of ar a r . calculate the partial pressure (in atm a t m ) of ne n e and ar a r in the container.
According to the statement the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.
To solve this problem, we first need to use the ideal gas law equation: PV = nRT. We know the volume of the container (V = 1.65 L), the temperature (T = 300 K), and the total mass of the gas mixture (20.0 g = 0.02 kg). We can calculate the total moles of gas using the molar mass of each gas (Ne: 20.18 g/mol, Ar: 39.95 g/mol):
n = (10.0 g Ne / 20.18 g/mol Ne) + (10.0 g Ar / 39.95 g/mol Ar)
n = 0.497 mol
Next, we need to calculate the partial pressure of each gas. We can use Dalton's law of partial pressures, which states that the total pressure of a gas mixture is the sum of the partial pressures of each gas. The partial pressure of each gas is equal to the mole fraction of that gas (x) times the total pressure (P):
P_Ne = x_Ne * P_total
P_Ar = x_Ar * P_total
To find the mole fraction of each gas, we divide the number of moles of that gas by the total number of moles:
x_Ne = n_Ne / n_total = (10.0 g Ne / 20.18 g/mol Ne) / 0.497 mol = 0.999
x_Ar = n_Ar / n_total = (10.0 g Ar / 39.95 g/mol Ar) / 0.497 mol = 0.001
Finally, we can calculate the partial pressures:
P_Ne = 0.999 * P_total
P_Ar = 0.001 * P_total
We know that the total pressure is equal to the pressure of the gas mixture in the container. We can rearrange the ideal gas law equation to solve for the pressure (P):
P = nRT / V
P = (0.497 mol) * (0.0821 L atm/mol K) * (300 K) / (1.65 L)
P = 7.24 atm
Therefore, the partial pressure of Ne is:
P_Ne = 0.999 * 7.24 atm = 7.23 atm
And the partial pressure of Ar is:
P_Ar = 0.001 * 7.24 atm = 0.007 atm
In conclusion, the partial pressure of Ne is 7.23 atm and the partial pressure of Ar is 0.007 atm in the container.
To know more about gas mixture visit :
https://brainly.com/question/16118479
#SPJ11
A pharmacist has an 18 lcohol solution. how much of this solution and how much water must be mixed together to make 10 liters of a 12 lcohol solution?
To find out how much of the 18% alcohol solution and how much water must be mixed together to make 10 liters of a 12% alcohol solution, you can use the following steps:
Step 1: Set up the equation
Let x be the amount of 18% alcohol solution, and y be the amount of water to be mixed.
x + y = 10 (total solution volume)
0.18x + 0y = 0.12 * 10 (total alcohol content)
Step 2: Solve for y
y = 10 - x
Step 3: Substitute y in the second equation
0.18x + 0(10 - x) = 1.2
0.18x = 1.2
Step 4: Solve for x
x = 1.2 / 0.18
x = 6.67 liters (approximately)
Step 5: Solve for y
y = 10 - 6.67
y = 3.33 liters (approximately)
In conclusion, to make 10 liters of a 12% alcohol solution, the pharmacist needs to mix approximately 6.67 liters of the 18% alcohol solution with approximately 3.33 liters of water.
To know more about 18% alcohol solution refer here
https://brainly.com/question/14462663#
#SPJ11
methyl orange is an indicator that changes color from red to yellow-orange over the ph range ~c.e(l'fl from 2.9 to 4.5. methyl orange
Methyl orange is a pH indicator that changes color from red to yellow-orange in the pH range of 2.9 to 4.5. It is commonly used in titrations to detect the endpoint of a reaction.
As an acidic pH indicator, methyl orange is often used in the titration of strong acids and weak bases. Its color change is a result of the chemical structure undergoing a change when the pH of the solution shifts. At lower pH levels (below 2.9), the molecule takes on a red hue, while at higher pH levels (above 4.5), it appears yellow-orange. The color change is due to the presence of a weakly acidic azo dye, which undergoes a chemical transformation as the hydrogen ions in the solution are either added or removed.
When used in a titration, methyl orange allows the observer to determine the endpoint of the reaction, signifying that the titrant has neutralized the analyte. The color change observed during the titration indicates that the pH of the solution has shifted, signaling the completion of the reaction. In some cases, methyl orange may not be the ideal indicator for certain titrations due to its relatively narrow pH range. In such instances, alternative indicators with a more suitable pH range should be used.
Know more about pH indicator here:
https://brainly.com/question/22603994
#SPJ11
A student obtained the following data for the gas phase decomposition of sulfuryl chloride at 600 K.
SO2Cl2(g)→SO2(g)+Cl2(g)
[SO2Cl2], M 5.95 x 10^-3 2.98 x 10^-3 1.49 x 10^-3 7.45 x 10^-4
time, min 0 171 342 513
a. What is the half-life for the reaction starting at t = 0 min?
b. What is the half-life for the reaction starting at t = 171 min?
c. Does the half-life increase, decrease, or remain constant as the reaction proceeds?
d. Is the reaction zero, first, or second order?
e. Based on this data, what is the rate constant for the reaction?
The half-life of a reaction is the amount of time it takes for half of the reactants to be consumed. For the decomposition of sulfuryl chloride at 600 K, the data shows a decrease in the concentration of SO2Cl2 over time.
a. To find the half-life starting at t = 0 min, we can use the formula t1/2 = ln(2) / k, where k is the rate constant. Using the initial concentration of SO₂Cl₂ (5.95 x 10⁻³ M) and the time it takes for the concentration to decrease to half (171 min), we can calculate the rate constant to be 2.45 x 10⁻⁴ s⁻¹, and the half-life to be 2831 seconds or 47.2 minutes.
b. To find the half-life starting at t = 171 min, we can use the same formula and use the concentration of SO₂Cl₂ at t = 171 min (2.98 x 10⁻³ M) and the time it takes for the concentration to decrease to half again (171 min). The rate constant is calculated to be 2.45 x 10⁻⁴ s^-1, and the half-life is still 47.2 minutes.
c. The half-life remains constant as the reaction proceeds. This is because the reaction is first order, which means the rate of the reaction only depends on the concentration of one reactant. In this case, the rate of the reaction depends on the concentration of SO₂Cl₂ only.
d. The reaction is first order because the half-life is constant and the rate of the reaction only depends on the concentration of SO₂Cl₂.
e. The rate constant for the reaction is 2.45 x 10⁻⁴ s⁻¹, which we found using the half-life formula and the concentration of SO₂Cl₂ at different times.
Learn more about decomposition here:
https://brainly.com/question/14843689
#SPJ11
If a 50.-kg person is uniformly irradiated by 0.10-J alpha radiation. The RBE is approximately 1 for gamma and beta radiation, and 10 for alpha radiation.
Part A
what is the absorbed dosage in rad?
Part B
what is the effective dosage in rem?
For a 50 kg person the absorbed dosage in rad is 200 rad, and effective dosage in rem is 40,000 rem.
Part A:
To calculate the absorbed dosage in rad, we first need to convert the energy of the alpha radiation from joules to ergs, since the rad unit is defined in terms of ergs per gram of tissue.
0.10 J = 10⁷ erg
Next, we use the formula:
Absorbed dosage (rad) = Energy absorbed (ergs) / Mass of tissue (g)
Assuming that the person's mass is 50 kg = 50,000 g, we get:
Absorbed dosage (rad) = 10⁷ erg / 50,000 g
Absorbed dosage (rad) = 200 rad
Therefore, the absorbed dosage in rad is 200 rad.
Part B:
To calculate the effective dosage in rem, we need to take into account the RBE (relative biological effectiveness) of alpha radiation, which is 10.
Effective dosage (rem) = Absorbed dosage (rad) x Q x RBE
Where Q is the quality factor for alpha radiation (which is 20) and RBE is the relative biological effectiveness of alpha radiation (which is 10).
So:
Effective dosage (rem) = 200 rad x 20 x 10
Effective dosage (rem) = 40,000 rem
Therefore, the effective dosage in rem is 40,000 rem.
To know more about alpha radiation visit:
https://brainly.com/question/852506
#SPJ11
backthe new improved laundry detergent restored connor's mud stained pants to its original condition. Terms in this set is
Laundry detergent is a common household cleaning agent used to remove stains and dirt from clothing.
It is specifically designed to break down and lift dirt particles from fabric fibers. Connor's mud stained pants were restored to their original condition thanks to the new improved laundry detergent. The detergent was likely formulated with powerful cleaning agents and enzymes to effectively remove tough stains like mud. Mud stains can be particularly difficult to remove as they contain natural pigments that can set into the fabric if not treated properly.
It's important to note that different types of laundry detergents may work better on different types of stains. Some detergents may be more effective on grass stains, while others may work better on food or ink stains. It's always a good idea to read the label on the detergent to determine its specific cleaning properties.
In conclusion, laundry detergent is an essential tool for keeping clothes clean and stain-free. Its ability to remove tough stains like Connor's mud from fabric is a testament to its effectiveness. By using the right detergent for the specific stain, anyone can achieve great results and keep their clothes looking their best.
To learn more about connor's mud:
https://brainly.com/question/26412212
#SPJ11
A cooler has 6 Gatorades B, 2 colas, and 4 waters. You select three beverages from the cooler at random. Let B denote the number of Gatorades ⊛ selected and let C denote the number of colas selected. For example, if you grabbed a cola and two waters, then C=1 and B=0. (a) Construct a joint probability distribution for B and C. (b) Find the marginal distribution p B (b). (c) Compute E[C] (d) Compute E[3B−C 2 ]
a) Joint probability distribution for B and C:
P(B = 0, C = 1) = 0.045
P(B = 1, C = 1) = 0.045
P(B = 2, C = 0) = 0.091
P(B = 3, C = 0) = 0.068
b) Marginal distribution of B: p_B(0) = 1/11
c) E[C] = 0.136
d) E[3B - C/2] = 1.318
(a) To construct the joint probability distribution for B and C, we need to calculate the probability of each possible outcome. There are a total of 4 possible outcomes: (B = 0, C = 1), (B = 1, C = 1), (B = 2, C = 0), and (B = 3, C = 0). The joint probability distribution is:
P(B = 0, C = 1) = (2/12) × (6/11) × (5/10) = 0.045
P(B = 1, C = 1) = (6/12) × (2/11) × (5/10) = 0.045
P(B = 2, C = 0) = (6/12) × (5/11) × (4/10) = 0.091
P(B = 3, C = 0) = (6/12) × (5/11) × (3/10) = 0.068
(b) The marginal distribution pB(b) is the probability distribution of B without considering the value of C. To find pB(b), we sum the joint probabilities over all possible values of C:
pB(0) = P(B = 0, C = 1) + P(B = 2, C = 0) + P(B = 3, C = 0) = 0.204
pB(1) = P(B = 1, C = 1) = 0.045
pB(2) = P(B = 2, C = 0) = 0.091
pB(3) = P(B = 3, C = 0) = 0.068
(c) To compute E[C], we need to multiply each value of C by its corresponding probability and sum the results:
E[C] = 0 × P(B = 0, C = 1) + 1 × P(B = 1, C = 1) + 1 × P(B = 2, C = 0) + 0 × P(B = 3, C = 0)
= 0.136
(d) To compute E[3B − C²], we need to first compute 3B − C² for each possible outcome, then multiply each result by its corresponding probability and sum the results:
3B − C² for (B = 0, C = 1) is 3(0) − 1² = -1
3B − C² for (B = 1, C = 1) is 3(1) − 1² = 2
3B − C² for (B = 2, C = 0) is 3(2) − 0² = 6
3B − C² for (B = 3, C = 0) is 3(3) − 0² = 9
E[3B − C²] = (-1) × P(B = 0, C = 1) + 2 × P(B = 1, C = 1) + 6 × P(B = 2, C = 0) + 9 × P(B = 3, C = 0)
= 1.318
To learn more about marginal distribution, here
https://brainly.com/question/14310262
#SPJ4
Name the compound formed when air reacts with magnesium
Answer:
magnesium oxide MgO
Explanation:
i thinnnk
Mg⇒O2=MgO
a solution of nitrous acid, hno2, is found to have the following concentrations at equilibrium: [hno2]=0.050mand[h3o ]=[no−2]=4.8×10−3m. What is the Ka of nitrous acid?
The Ka of nitrous acid is approximately 4.608 × 10⁻5.
To find the Ka of nitrous acid ([tex]HNO_{2}[/tex]), we'll use the equilibrium concentrations given in the question. The reaction for nitrous acid dissociation is:
[tex]HNO_{2}[/tex] ⇌ [tex]H_{3} O[/tex]+[tex]NO_{2}[/tex]-
At equilibrium, the concentrations are:
[[tex]HNO_{2}[/tex]] = 0.050 M
[[tex]H_{3} O[/tex]+] = [[tex]NO_{2}[/tex]-] = 4.8 × 10⁻³ M
The Ka expression for nitrous acid is:
Ka = ([tex]H_{3} O[/tex]+][[tex]NO_{2}[/tex]-]) / [[tex]HNO_{2}[/tex]]
Substitute the equilibrium concentrations into the Ka expression:
Ka = (4.8 × 10⁻³)(4.8 × 10⁻³) / 0.050
Now, calculate the Ka value:
Ka ≈ 4.608 ×[tex]10^{-5}[/tex]
So, the Ka of nitrous acid is approximately 4.608 × [tex]10^{-5}[/tex]
Know more about nitrous acid here:
https://brainly.com/question/31008196
#SPJ11
The lengths of the sides of a triangle are 7 cm, 4 cm, and 10 cm. Change the length of the longest side so the lengths will form a right
triangle. What is the new length? Round your answer to the nearest tenth
To change the lengths of the sides of a triangle (7 cm, 4 cm, and 10 cm) so they form a right triangle, we need to modify the length of the longest side. By using the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse is equal to the sum of the squares of the other two sides, we can determine the new length. In this case, the new length of the longest side, rounded to the nearest tenth, is approximately 10.8 cm.
In a right triangle, the Pythagorean theorem can be used to relate the lengths of the sides. According to the theorem, in a right triangle with sides of lengths a, b, and c (where c is the hypotenuse, the side opposite the right angle), the following equation holds true: a^2 + b^2 = c^2.
In the given triangle, the longest side is 10 cm. To make the lengths form a right triangle, we need to modify the length of the longest side. Let's assume that the new length is x.
Using the Pythagorean theorem, we can set up the equation: 7^2 + 4^2 = x^2.
Simplifying the equation, we have 49 + 16 = x^2, which becomes 65 = x^2.
Taking the square root of both sides, we find that x ≈ 8.06.
Therefore, the new length of the longest side, rounded to the nearest tenth, is approximately 8.1 cm.
To learn more about Pythagorean theorem - brainly.com/question/14930619
#SPJ
What did you learn about factors that affect the speed of melting ice? Explain your answer with evidence, such as your data and observations.
calculate the standard cell potential for a battery based on the following reactions: sn2 2e- → sn(s) e° = -0.14 v au3 3e- → au(s) e° = 1.50 v
The standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species)
To calculate the standard cell potential for a battery based on the given reactions, we need to use the equation:
E°cell = E°cathode - E°anode
where E°cathode is the standard reduction potential of the cathode and E°anode is the standard reduction potential of the anode. The negative sign in front of the E°anode value is due to the fact that it is a reduction potential and we need to reverse the sign to get the oxidation potential.
So, in this case, we have:
E°cell = E°cathode - E°anode
E°cell = 1.50 V - (-0.14 V)
E°cell = 1.64 V
Therefore, the standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species).
To know more about cell potential, refer
https://brainly.com/question/19036092
#SPJ11