In the electrochemical reaction represented by the balanced equation 3Mn(s) + 2Au₃⁺(aq) → 3Mn₂+(aq) + 2Au(s), a total of 6 moles of electrons are transferred.
The balanced equation provides the stoichiometric coefficients of the reactants and products, which represent the mole ratios in the reaction. In this case, the coefficient of Mn(s) is 3, and the coefficient of Au³⁺(aq) is 2. This means that for every 3 moles of Mn atoms and 2 moles of Au⁺ ions involved in the reaction, 3 moles of Mn²⁺ ions and 2 moles of Au atoms are produced.
Since the balanced equation does not specify the number of electrons involved in the transfer, we need to consider the changes in oxidation states of the elements to determine the number of electrons spectator ions transferred. In this reaction, each Mn atom loses 2 electrons, going from an oxidation state of 0 to +2, while each Au³⁺ ion gains 3 electrons, going from an oxidation state of +3 to 0.
Therefore, for every 3 moles of Mn atoms that lose 2 electrons each and 2 moles of Au³⁺ ions that gain 3 electrons each, a total of 6 moles of electrons are transferred in the reaction.
Learn more about spectator ions here
https://brainly.com/question/31749911
#SPJ11
how to calculate ksp from thermodynamic data
Calculating the solubility product constant (Ksp) from thermodynamic data involves using the standard free energy change of the dissolution reaction, ΔG°, which is related to Ksp by the equation: ΔG° = -RTlnKsp, where R is the gas constant and T is the temperature in Kelvin.
To calculate Ksp from thermodynamic data, you first need to determine the standard free energy change of the dissolution reaction. This can be done using thermodynamic tables or equations, such as the Gibbs-Helmholtz equation. Once you have ΔG°, you can use the above equation to calculate Ksp.
It's important to note that thermodynamic data alone may not always be sufficient to accurately determine Ksp. Experimental data, such as solubility measurements, may also need to be taken into account. Additionally, factors such as the effect of pH and the presence of other ions in solution can also affect Ksp and should be considered when calculating it.
To know more about solubility product constant, refer to the link below:
https://brainly.com/question/1419865#
#SPJ11
Write equations that show the following processes.
Express your answer as a chemical equation separated by a comma. Identify all of the phases in your answer.
The first two ionization energies of nickel
The fourth ionization energy of zirconium.
The first two ionization energies of nickel:
Ni(g) → Ni+(g) + e^− (1st ionization energy)
Ni+(g) → Ni2+(g) + e^− (2nd ionization energy)
The fourth ionization energy of zirconium:
Zr3+(g) → Zr4+(g) + e^−
What are the chemical equations for the first two ionization energies of nickel and the fourth ionization energy of zirconium?The first two ionization energies of nickel can be represented by the following equations:
Ni(g) → Ni+(g) + e- (first ionization energy)
Ni+(g) → Ni2+(g) + e- (second ionization energy)
The fourth ionization energy of zirconium can be represented by the following equation:
Zr3+(g) → Zr4+(g) + e-
In all equations, the state of the element or ion is indicated in parentheses, with (g) representing a gaseous state. The symbol e- represents an electron, and the arrow indicates the direction of the reaction.
Learn more about Ionization.
brainly.com/question/28385102
#SPJ11
Fatty acid degradation proceeds through repeated cycles of Boxidation with each cycle containing four reactions. Arrange the four enzymes that catalyze these reactions in order from first to last. 3-hydroxyacyl-COA dehydrogenase Acyl-CoA dehydrogenase B-ketoacyl-CoA thiolase Enoyl-CoA hydratase
The order of the four enzymes that catalyze the reactions in the fatty acid degradation cycle, from first to last, is as follows :- Acyl-CoA dehydrogenase, Enoyl-CoA hydratase, B-ketoacyl-CoA thiolase, 3-hydroxyacyl-COA dehydrogenase.
The enzymes are arranged in the order in which they act on the fatty acid molecule during each cycle of the degradation.
During each cycle of the fatty acid degradation, the acyl-CoA molecule is oxidized by acyl-CoA dehydrogenase to produce a trans-Δ2-enoyl-CoA. The enoyl-CoA molecule is then hydrated by enoyl-CoA hydratase to produce a β-hydroxyacyl-CoA.
This molecule is then oxidized by 3-hydroxyacyl-COA dehydrogenase to produce a β-ketoacyl-CoA. Finally, this molecule is cleaved by B-ketoacyl-CoA thiolase to produce acetyl-CoA and a new, shorter acyl-CoA molecule, which can enter another cycle of the fatty acid degradation.
To know more about enzymes refer here :-
https://brainly.com/question/17292676#
#SPJ11
using this list (links to an external site.) from gchem, which species will reduce ag+ but not fe2+? group of answer choices h2 cr k co2+
To determine which species will reduce Ag+ (silver ions) but not Fe2+ (iron ions), we need to consider their reduction potentials.
The reduction potential is a measure of the tendency of a species to gain electrons and undergo reduction in a redox reaction.
Hydrogen gas (H2): Hydrogen gas has a relatively high reduction potential and is a strong reducing agent. It can typically reduce both Ag+ and Fe2+.
Chromium (Cr): Chromium can exhibit multiple oxidation states. In some forms, it can reduce Ag+ but not Fe2+. However, without specific information about the oxidation state of chromium in this context, we cannot determine its reducing properties accurately.
Potassium (K): Potassium has a low reduction potential and is not a strong reducing agent. It is unlikely to reduce Ag+ or Fe2+.
Carbon dioxide ion (CO2+): Carbon dioxide does not possess reducing properties and is unlikely to reduce either Ag+ or Fe2+.
In summary, based on general trends, hydrogen gas (H2) is likely to reduce both Ag+ and Fe2+. Chromium (Cr) in certain forms may reduce Ag+ but not Fe2+, but we need more information about the specific oxidation state. Potassium (K) and carbon dioxide ion (CO2+) are unlikely to reduce either Ag+ or Fe2+.
Learn more about redox reaction here : brainly.com/question/28300253
#SPJ11
2nh3(g)=n2(g) 3h2(g) now suppose a reaction vessel is filled with 9.27 atmof nitrosyl chloride and of chlorine at . answer the following questions about this system:
I apologize, but it seems like the equation you provided is incomplete. Please provide the complete balanced equation for the reaction involving nitrosyl chloride and chlorine, and I'll be happy to assist you with the questions about the system.
learn more about nitrosyl chloride
https://brainly.com/question/30461969?referrer=searchResults
#SPJ11
Arrange the following events in an order that explains the mass flow of materials in the phloem.
1. Water diffuses into the sieve tubes.
2. Leaf cells produce sugar by photosynthesis.
3. Solutes are actively transported into sieve tubes.
4. Sugar moves down the stem.
A.) 2, 1, 4, 3
B.) 1, 2, 3, 4
C.) 2, 3, 1, 4
D.) 4, 2, 1, 3
The correct order of events that explains the mass flow of materials in the phloem is: 2. Leaf cells produce sugar by photosynthesis, 3. Solutes are actively transported into sieve tubes, 1. Water diffuses into the sieve tubes, and 4. Sugar moves down the stem. Therefore, the order of events are 2,3,1,4
Sugars produced in leaves by photosynthesis. This sugar is needed by the plant as an energy source to grow. Sugars are transported from source cells into sinks through the phloem. Sugars moves from companion cells into sieve tube by active transport. It reduces the water potential of the sieve tube element and cause water moves into the phloem by osmosis. There is a pressure gradient with high hydrostatic pressure near the source cell and lower hydrostatic pressure near the sink cells. This condition makes the sugars move down towards the sink end of the phloem providing nutrients to other parts of the plant.
Learn more about mass flow of sugars in the phloem by clicking this link :
https://brainly.com/question/15072785
#SPJ11
What is the value of ΔG o in kJ at 25 oC for the reaction between the pair:Ag(s) and Mn2+(aq) to give Mn(s) and Ag+(aq)Use the reduction potential values for Ag+(aq) of +0.80 V and for Mn2+(aq) of -1.18 V
The value of ΔG° at 25°C for the reaction between Ag(s) and Mn²⁺(aq) to give Mn(s) and Ag⁺(aq) is +1.98 kJ.
The standard Gibbs free energy change (ΔG°) of a reaction is related to the standard electrode potentials of the half-reactions involved using the equation:
ΔG° = -nFΔE°
Where n is the number of electrons transferred in the balanced equation for the overall reaction, F is the Faraday constant (96,485 C/mol), and ΔE° is the difference in the standard electrode potentials of the half-reactions involved.
The balanced equation for the reaction is:
Mn²⁺(aq) + 2Ag(s) → Mn(s) + 2Ag⁺(aq)
The standard electrode potential of the half-reaction for the reduction of Ag⁺(aq) is +0.80 V, and the standard electrode potential of the half-reaction for the reduction of Mn²⁺(aq) is -1.18 V. The overall reaction involves the transfer of two electrons, so n = 2.
Using the equation above, we can calculate the standard Gibbs free energy change:
ΔG° = -nFΔE°
= -2 × 96,485 C/mol × (0.80 V - (-1.18 V))
= +1.98 kJ
Therefore, the value of ΔG° at 25°C for the reaction between Ag(s) and Mn²⁺(aq) to give Mn(s) and Ag⁺(aq) is +1.98 kJ. Since ΔG° is positive, the reaction is not spontaneous under standard conditions at 25°C.
To know more about Gibbs free energy, refer here:
https://brainly.com/question/13318988#
#SPJ11
estimate the effect of relative supersaturation on the primary, homogeneous nucleation of baso4 from an aqueous solution at 25c, if crystal density 1⁄4 4.50 g/cm3 and interfacial tension 1⁄4 0.12 j/m2
Relative supersaturation refers to the excess amount of solute present in a solution compared to its equilibrium concentration. It is an important parameter that affects the nucleation and growth of crystals from solution. In this case, we are interested in the effect of relative supersaturation on the primary, homogeneous nucleation of BaSO4 from an aqueous solution at 25°C, given the crystal density and interfacial tension.
Homogeneous nucleation occurs when nucleation sites are created spontaneously throughout the solution, without any external influence. It is a stochastic process that depends on the concentration of the solute, temperature, and interfacial tension. The critical relative supersaturation, S*, is the minimum value of supersaturation required for the onset of nucleation. Below S*, no nucleation occurs, while above S*, nucleation becomes spontaneous and rapid.
The expression for S* is given by the classical nucleation theory as:
S* = (2γv/ρkTln(S))^(1/2)
where γv is the interfacial tension, ρ is the crystal density, k is the Boltzmann constant, T is the temperature, and S is the relative supersaturation.
Substituting the given values, we get:
S* = (2 x 0.12 J/m2 x (4.50 g/cm3) / (1.38 x 10^-23 J/K x 298 K x ln(S)))^(1/2)
Simplifying this expression, we get:
S* = (4.32 x 10^12 / ln(S))^(1/2)
Now, let's assume a relative supersaturation value of 1.5. Substituting this value in the above equation, we get:
S* = (4.32 x 10^12 / ln(1.5))^(1/2)
S* = 3.94 x 10^6
This means that the critical relative supersaturation for homogeneous nucleation of BaSO4 from an aqueous solution at 25°C is 3.94 x 10^6. Any relative supersaturation value above this will lead to spontaneous and rapid nucleation of BaSO4 crystals. It is important to note that this value is only an estimate based on the classical nucleation theory and may not accurately reflect the actual nucleation behavior in a real system.
learn more about crystal density
https://brainly.in/question/1963990?referrer=searchResults
#SPJ11
In the compound (NH4)2S2O3, which element is present in the largest percent by mass? a. H b. N c. O d. S How much heat is evolved or absorbed when 25.0 g of silver oxidizes to form silver oxide (Ag2O) under standard conditions according to the reaction below? 4 Ag (s) + O2 (g) → 2 Ag20 (s) AHºrxn = -62.10 kJ a. -14.4 kJ b. -7.20 kJ c.-3.60 kJ d. +7.20 kJ Question What mass of K2C204 is required to react completely with 30.0 mL of 0.100 M Fe(NO3)3? The molar mass of K2C204 is 166.214 g/mol. 2 Fe(NO3)3 (aq) + 3 K2C2O4 (aq) → Fe2(C2O4)3 (s) + 6 KNO3 (aq) a. 2.36 g b. 0.499 g c. 0.748 g d. 5.39 g
The element which is present in the largest percent by mass is sulfur (S). Option D is correct. The amount of heat involved when 25.0 g of silver oxidizes is -14.4 kJ. The mass of K₂C₂0₄ is required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃ will be 0.748 g. Option C is correct.
In (NH₄)₂S₂O₃, the element present in the largest percent by mass is sulfur (S).
To calculate amount of heat evolved or absorbed when 25.0 g of silver oxidizes to form silver oxide (Ag₂O) under standard conditions according to given reaction;
4 Ag (s) + O₂ (g) → 2 Ag₂0 (s) ΔH°rxn = -62.10 kJ
We need to use the following formula;
q = n × ΔH°rxn
where q is the heat involved, n is number of moles of silver that react, and ΔH°rxn is the enthalpy change for the reaction.
First, we need to calculate the number of moles of silver (Ag);
n = mass / molar mass
n = 25.0 g / 107.87 g/mol = 0.2314 mol
Now we can substitute the values into formula;
q = 0.2314 mol × (-62.10 kJ/mol) = -14.4 kJ
Therefore, the amount of heat involved when 25.0 g of silver oxidizes is -14.4 kJ.
To determine the mass of K₂C₂0₄ required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃, we need to use the following formula;
n(K₂C₂O₄) = n(Fe(NO₃)₃) × (3/2)
where n is the number of moles of each substance, and the stoichiometric coefficients are used to relate the number of moles of K₂C₂O₄ to Fe(NO₃)₃.
First, we need to calculate the number of moles of Fe(NO₃)₃:
n(Fe(NO₃)₃) = concentration × volume
n(Fe(NO₃)₃) = 0.100 mol/L × 0.0300 L = 0.00300 mol
Now we can use the stoichiometry to calculate the number of moles of K₂C₂O₄;
n(K₂C₂O₄) = 0.00300 mol × (3/2) = 0.00450 mol
Finally, we can use the number of moles and the molar mass of K₂C₂O₄ to calculate the mass required;
mass = n × molar mass
mass = 0.00450 mol × 166.214 g/mol = 0.748 g
Therefore, the mass of K₂C₂0₄ required to react completely with 30.0 mL of 0.100 M Fe(NO₃)₃ is 0.748 g.
To know more about molar mass here
https://brainly.com/question/22997914
#SPJ4
what is one of the possible sets of the four quantum numbers of an electron in the 3rd energy level around an iron atom (iron
The correct set of quantum numbers for an electron in the 3d orbital is:
n = 3, l = 2, m = -2, s = +1/2
Let's break down each quantum number:
The principal quantum number (n) represents the energy level or shell of the electron. In this case, it is 3, indicating that the electron is in the third energy level.
The azimuthal quantum number (l) represents the angular momentum of the electron. It can have values ranging from 0 to (n-1). In this case, it is 2, indicating that the electron is in the d orbital.
The magnetic quantum number (m) represents the orientation of the orbital in three-dimensional space. It can have values ranging from -l to +l. In this case, it is -2, indicating a specific orientation of the d orbital.
The spin quantum number (s) represents the spin state of the electron. It can have values of +1/2 or -1/2, indicating the two possible spin orientations of an electron. In this case, it is +1/2, representing the spin-up orientation.
Therefore, the correct set of quantum numbers for an electron in the 3d orbital is n = 3, l = 2, m = -2, s = +1/2.
The correct question is:
Which of the following sets of quantum numbers is correct for an electron in 3d orbital?
n = 3, l = 2, m = −3, s = + 1/2
n = 3, l = 3, m = +3, s = - 1/2
n = 3, l = 2, m = −2, s = + 1/2
n = 3, l = 2, m = -3, s = - 1/2
To know more about quantum numbers follow the link:
https://brainly.com/question/14288557
#SPJ4
at the end of the experiment you titrate the solution with 0.507 m hcl and it takes 38.30 ml to neutralize the ammonia. what is the equilibrium molarity of ammonia after the 2nd addition of ammonia? (report your answer with 4 decimal places.)
The equilibrium molarity of ammonia after the 2nd addition of ammonia is 1.94181× 10⁻⁶ M.
The total number of moles of solute in a particular solution's molarity is expressed as moles of solute per litre of solution. As opposed to mass, which fluctuates with changes in the system's physical circumstances, the volume of a solution depends on changes in the system's physical conditions, such as pressure and temperature. M, sometimes known as a molar, stands for molarity. When one gramme of solute dissolves in one litre of solution, the solution has a molarity of one.
The balanced equation of reaction is given below;
HCl + NH₃ → NH₄Cl.
We are given the volume in milliliters, let us convert them into Litres;
= 38.30 × 10⁻³ Litres.
Here, we have an incomplete question (one parameter is missing- the volume of ammonia,NH₃). Therefore, we assume that the volume of Ammonia, NH₃ is 10mL(10× 10⁻³ Litres).
Step one: we need to calculate the number of moles of HCl.
Number of moles of HCl= molarity × volume.
Number of moles of HCl= 0.507 M × 38.30× 10⁻³ L.
Number of moles of HCl= 0.0194181 moles.
From the equation of reaction above, we have that one mole of ammonia is reacting with one mole of Hydrogen Chloride, HCl. Hence, the number of moles of ammonia is equal to the number of moles of Hydrogen Chloride, HCl.
Step two: calculate the molarity of Ammonia, NH₃.
The molarity of ammonia= number of moles of ammonia/ volume of Ammonia, NH₃.
Molarity of Ammonia= 0.0194181/10× 10⁻³ moles NH₃.
Molarity of Ammonia= 0.00000194181.
Molarity of Ammonia = 1.94181× 10⁻⁶ M.
Learn more about Molarity:
https://brainly.com/question/26528084
#SPJ4
Identify the oxidation half reaction of Zn(s). Select one: a. Zn(s) + Cu2+ (aq) → Zn2+ (aq) + Cu(s) b. Zn²+ (aq) + 2e + Zn(s) c. Zn(s) → Zn2+ (aq) + 2 e d. Zn(s) → Zn2+ (aq) +e
The oxidation half-reaction of [tex]Zn(s)[/tex] is: c. [tex]Zn(s) \rightarrow Zn2+ (aq) + 2 e-[/tex]
Oxidation half-reactionIn the oxidation half-reaction of [tex]Zn(s)[/tex], the Zn atom loses two electrons to form [tex]Zn2+[/tex] ions, which are positively charged. This process of losing electrons is called oxidation, and it occurs when a species loses one or more electrons.
The oxidation half-reaction for [tex]Zn(s)[/tex] can be represented as [tex]Zn(s) \rightarrow Zn2+ (aq) + 2 e-[/tex]. This half-reaction shows the transformation of [tex]Zn[/tex] atoms from a neutral state to a positively charged state by losing two electrons.
This oxidation process is often coupled with a reduction half-reaction to form a redox reaction, which involves the transfer of electrons between species.
Teherefore the oxidation half-reaction of [tex]Zn(s)[/tex] is: c. [tex]Zn(s) \rightarrow Zn2+ (aq) + 2 e-[/tex]
Learn more about oxidation half-reaction: brainly.com/question/26411933
#SPJ11
how many kilograms of nickel must be added to 2.43 kg of copper to yield a solidus temperature of 1300°c? u
We need to add approximately 1.74 kg of nickel to 2.43 kg of copper to yield a solidus temperature of 1300°C. When copper and nickel are mixed together, they form an alloy.
The solidus temperature of the alloy depends on the proportions of copper and nickel in the mixture. To calculate the amount of nickel that must be added to 2.43 kg of copper to yield a solidus temperature of 1300°C, we need to use the lever rule equation. The lever rule equation relates the weight of each component in the alloy to the solidus temperature of the alloy. The equation is:
((Wn - Wc) / (Ws - Wc)) = ((Ts - Tc) / (Tn - Ts))
where:
Wn = weight of nickel to be added
Wc = weight of copper
Ws = weight of the resulting alloy
Ts = solidus temperature of the resulting alloy
Tc = solidus temperature of copper
Tn = solidus temperature of nickel
We are given the weight of copper (2.43 kg) and the solidus temperature of copper (1084°C). We are also given the desired solidus temperature of the alloy (1300°C) and the solidus temperature of nickel (1455°C).
We can use the lever rule equation to solve for the weight of nickel that must be added to the copper to yield the desired solidus temperature of 1300°C.
First, we rearrange the equation to solve for the weight of nickel:
Wn = ((Ts - Tc) / (Tn - Ts)) * (Ws - Wc)
Then, we substitute the known values:
Wn = ((1300°C - 1084°C) / (1455°C - 1300°C)) * (Wn + 2.43 kg - 2.43 kg)
We simplify this equation to get:
Wn = (216°C / 155°C) * Wn
Wn = 1.3935 * Wn
Finally, we divide both sides by 1.3935 to get:
Wn ≈ 1.74 kg
Therefore, we need to add approximately 1.74 kg of nickel to 2.43 kg of copper to yield a solidus temperature of 1300°C.
For more questions like temperature visit the link below:
https://brainly.com/question/31517883
#SPJ11
The following set of data was obtained by the method of initial rates for the reaction:S2O82-(aq) + 3 I-1(aq) → 2 SO42-(aq) + I3-1(aq)What is the initial rate when S2O82- is 0.15 M and I- is 0.15 M?Exp [S2O82-] (M) [I-1] (M) Rate (M/s)1 0.25 0.10 9.00 x 10-32 0.10 0.10 3.60 x 10-33 0.20 0.30 2.16 x 10-2Seleccione una:a. 5.40 × 10-2 M s-1b. 1.22 × 10-2 M s-1c. 4.10 × 10-6 M s-1d. 8.10 × 10-3 M s-1
The initial rate for the reaction when [S₂O₈²⁻] is 0.15 M and [I-] is 0.15 M is 8.10 × 10⁻³ M s⁻¹
How do we calculate the initial rate for the reaction?The rate law states
Rate = k(S₂O₈²⁻)(I⁻)
The rate constant, k, can be determined by substituting the rate and concentrations from any of the experiments into the rate law. Using Experiment 1, we have:
9.00 x 10⁻³M/s = k(0.25M)(0.10)
k = (9.00 x 10⁻³ M/s)/(0.25M)(0.10M)
k = 36 x 10⁻²M⁻¹S⁻¹
Rate = (3.6 x 10⁻²M⁻¹S⁻¹)(0.15M)(0.15M)
Rate = 8.10 x 10⁻³M/s
The above answer is based on the full question below
The following set of data was obtained by the method of initial rates for the reaction
S₂O₈²⁻(aq) + 3 I-1(aq) → 2 SO₄²⁻(aq) + I3-1(aq)
What is the initial rate when S2O82- is 0.15 M and I- is 0.15 M?
Exp [S₂O₈²⁻] (M) [I-1] (M) Rate (M/s)
1 0.25 0.10 9.00 x 10⁻³
2 0.10 0.10 3.60 x 10⁻³
3 0.20 0.30 2.16 x 10⁻²
Select one una:
a. 5.40 × 10-2 M s⁻¹
b. 1.22 × 10-2 M s⁻¹
c. 4.10 × 10-6 M s⁻¹
d. 8.10 × 10-3 M s⁻¹
Find more exercises on initial rate of reaction;
https://brainly.com/question/31524964
#SPJ1
Can someone explain what my teacher is asking for in the study guide I have a stoichiometry test tomorrow.
I understand all of part one but don’t understand what I’m meant to study for part two or what I should search up to get help
I specifically don’t understand:
1. using a balanced equation, calculate:
- moles to moles
- mass to mass
2. Limiting reactant from two reactants using:
- mol to mol
- mass to mass
3. Limiting reactant: how much excess reactant remains after a reaction is complete/finished
The excess reactant is the reactant that remains after the limiting reactant is completely consumed in a reaction. To convert from mass to mass, you need the molar masses of the reactants and products involved. The molar mass is the mass of one mole of a substance, expressed in grams/mol.
Conversions: mole to mole, mass to massa) Moles to moles:
Given a balanced equation, you can determine the mole-to-mole ratio by comparing the coefficients of the reactant and product in the balanced equation.
b) Converting Mass to mass:
To convert from mass to mass, you need the molar masses of the reactants and products involved. The molar mass is the mass of one mole of a substance, expressed in grams/mol.
3. To determine the limiting reactant using mol to mol and mass to mass calculations,
Let' used this equation for reference purposes A + B → C
a) Mol to mol:
Convert the given moles of reactant A to moles of reactant B using the mole-to-mole ratio obtained from the balanced equation.If the moles of B obtained are greater than the available moles of B, reactant A is the limiting reactant.If the moles of B obtained are less than or equal to the available moles of B, reactant B is the limiting reactant.b) Mass to mass:
Convert the given mass of reactant A to moles using its molar mass.Convert the moles of reactant A to moles of reactant B using the mole to mole ratio obtained from the balanced equation.Convert the moles of reactant B to the mass of reactant B using its molar mass.If the mass of B obtained is greater than the available mass of B, reactant A is the limiting reactant.If the mass of B obtained is less than or equal to the available mass of B, reactant B is the limiting reactant.The excess reactant is the reactant that remains after the limiting reactant is completely consumed in a reaction. To calculate the amount of excess reactant remaining, you can follow these steps:Determine the limiting reactant using the methods described above.Calculate the amount of product obtained from the limiting reactant.Calculate the amount of the other reactant that would be required to fully react with the limiting reactant, based on the mole-to-mole ratio from the balanced equation.Subtract the amount of the other reactant actually used from the total amount of the other reactant initially present. The result is the excess reactant remaining after the reaction is complete.Learn more on limiting reactant here https://brainly.com/question/30879855
#SPJ1
Potassium metal reacts with chlorine gas to form solid potassium chloride. Answer the following:
Write a balanced chemical equation (include states of matter)
Classify the type of reaction as combination, decomposition, single replacement, double replacement, or combustion
If you initially started with 78 g of potassium and 71 grams of chlorine then determine the mass of potassium chloride produced.
The reaction between pottasium metal and chlorine gas is a combination reaction and it is as follows;
2K + Cl₂ → 2KCl
What is a chemical reaction?A chemical reaction is a process involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.
A chemical reaction is said to be a combination reaction when two or more atoms are joined together to form a compound. An example is the reaction of pottasium metal and chlorine gas to produce pottasium chloride as follows:
2K + Cl₂ → 2KCl
In the above equation, two elements; pottasium chemically combines with chlorine to form a compound; pottasium chloride.
Learn more about combination reaction at: https://brainly.com/question/32027270
#SPJ1
compute the mass of kcl needed to prepare 1000 ml of a 1.50 m solution.
The mass of KCl needed to prepare 1000 ml of a 1.50 M solution is 173.65 grams.
To compute the mass of KCl needed, we need to use the formula:
mass (in grams) = moles x molar mass
First, we need to calculate the number of moles of KCl required for a 1.50 M solution:
1.50 mol/L x 1 L = 1.50 moles
The molar mass of KCl is 74.55 g/mol.
Using this information, we can calculate the mass of KCl needed:
mass = 1.50 moles x 74.55 g/mol = 173.65 grams
Therefore, 173.65 grams of KCl is required to prepare 1000 ml of a 1.50 M solution.
Learn more about moles here:
https://brainly.com/question/31597231
#SPJ11
In this problem; we will consider two different sets of conditions for the elimination reaction of alcohol 2 to give an alkene. (Ph is the abbreviation for a phenyl group; CoHs.) Ph H HaC OH The reaction of alcohol 2 with tosyl chloride (TsCl) followed by potassium t-butoxide (t-BuO K) generates an alkene What type of elimination reaction is this? Propose a mechanism for each step: What is the structure of the product? b) The reaction of alcohol 2 with hot concentrated HsPO4 also generates an alkene. What type of elimination reaction is this? Propose a mechanism for the reaction of 2 in hot concentrated HzSOa. What is the structure of the product?
This is example of an E2 elimination reaction, the structure has 2 alcohol, (a) structure of product Ph H HaC=CH₂ + KOTs + t-BuOH
(b) structure of product Ph H HaC=CH₂ + H+
a) Alcohol 2 is eliminated through an E₂ elimination reaction with tosyl chloride (TsCl) and potassium t-butoxide (t-BuO K).
Mechanism:
Tosylate ester intermediate is created when alcohol 2 and TsCl react.
In order to create an alkene, potassium t-butoxide, or t-BuO K, removes a proton from the beta carbon of the intermediate tosylate ester.
The composition of alcohol 2 will determine the structure of the product.
b) The reaction between hot concentrated H₂SO₄ and alcohol 2 is also an E₂ elimination reaction.
Alcohol 2 undergoes protonation to create a protonated alcohol intermediate in the presence of hot, concentrated H₂SO₄.
To create an intermediate carbocation, the protonated alcohol intermediate loses a water molecule.
To create an alkene, a base (such as water) removes a proton from the intermediate carbocation's beta carbon.
The composition of alcohol 2 will determine the structure of the product.
Learn more about elimination reaction at:
brainly.com/question/29695970
#SPJ4
mrna molecule simultaneously being translated by many ribosomes all going in the same direction
The phenomenon you are referring to is called "polysome" or "polyribosome" formation. When an mRNA molecule is being translated, multiple ribosomes can bind to different regions of the mRNA at the same time, and they all move in the same direction along the mRNA molecule.
This allows for multiple copies of the same protein to be produced simultaneously, increasing the efficiency of protein synthesis. Polysome formation is common in rapidly dividing cells or cells that require large amounts of a particular protein.
The process of mRNA being translated by multiple ribosomes simultaneously. This phenomenon is called "polyribosome" or "polysome." During protein synthesis, the mRNA molecule is simultaneously being translated by many ribosomes all going in the same direction.
1. The mRNA molecule, which carries the genetic code for a protein, exits the nucleus and enters the cytoplasm of the cell.
2. A ribosome, the cellular machinery responsible for protein synthesis, binds to the mRNA molecule at the start codon (usually AUG) to initiate translation.
3. As the first ribosome starts translating the mRNA into a protein, another ribosome can also bind to the mRNA behind the first ribosome, initiating its translation process.
4. This formation of multiple ribosomes on a single mRNA molecule is called a polyribosome or polysome. All the ribosomes move in the same direction along the mRNA, synthesizing proteins simultaneously.
5. Each ribosome reads the mRNA's genetic code in a sequence of three nucleotides, called codons. The ribosome matches each codon with the corresponding amino acid, delivered by tRNA molecules.
6. The amino acids are linked together to form a polypeptide chain, which will eventually fold into the final protein structure.
7. When the ribosomes reach the stop codon on the mRNA, translation is terminated, and the newly synthesized proteins are released into the cell.
In summary, a polyribosome is a structure where multiple ribosomes translate an mRNA molecule simultaneously, all moving in the same direction, increasing the efficiency of protein synthesis.
For more such questions on polyribosome , Visit:
https://brainly.com/question/28209159
#SPJ11
When an mRNA molecule is being translated by multiple ribosomes at the same time and in the same direction, this is known as polysomes or polyribosomes. This process is essential for efficient protein synthesis as it allows for the rapid production of a large number of proteins from a single mRNA molecule. The ribosomes move along the mRNA molecule in a coordinated fashion, each one adding amino acids to the growing protein chain. The process of polyribosome formation is regulated by various factors, including the availability of ribosomes and the stability of the mRNA molecule.
To know more about Ribosome check here:
https://brainly.com/question/8773679
#SPJ11
calculate δg∘rxn and e∘cell for a redox reaction with n = 2 that has an equilibrium constant of k = 30 (at 25 ∘c).
ΔG°rxn for a redox reaction can be calculated using the equation -RT ln(K), while E°cell can be calculated using (RT/nF) ln(K), where R is the gas constant, T is the temperature in Kelvin.
How can ΔG°rxn and E°cell be calculated for a redox reaction with n = 2 and an equilibrium constant of K = 30 at 25°C?To calculate ΔG°rxn (standard Gibbs free energy change) and E°cell (standard cell potential) for a redox reaction with n = 2 and an equilibrium constant K = 30 at 25°C, we can use the following relationships:
ΔG°rxn = -RT ln(K)
E°cell = (RT/nF) ln(K)
Where:
R is the gas constant (8.314 J/(mol·K)) T is the temperature in Kelvin (25 + 273 = 298 K) F is the Faraday constant (96,485 C/mol)By substituting the values into the equations, we can calculate ΔG°rxn and E°cell. Please note that without the specific balanced redox reaction, it is not possible to provide the numerical values.
Learn more about redox reaction
brainly.com/question/28300253
#SPJ11
Lead-210 results from a series of decays in which two alpha-particles and two beta-particles were released from an unstable nuclide. Identify the parent nuclide that initially underwent decay. O radium-218 lead-218 polonium-218 mercury-202 lead-214
Answer:The parent nuclide that initially underwent decay to form Lead-210 is Polonium-218.
Explanation: Polonium-218 undergoes a series of decays in which it emits two alpha-particles and two beta-particles, resulting in the formation of Lead-210. The decay series is as follows:
Polonium-218 → (alpha decay) → Lead-214 → (beta decay) → Bismuth-214 → (alpha decay) → Polonium-210 → (alpha decay) → Lead-206 → (beta decay) → Bismuth-206 → (beta decay) → Polonium-206 → (alpha decay) → Lead-202 → (beta decay) → Thallium-202 → (beta decay) → Lead-202 → (alpha decay) → Mercury-198 → (beta decay) → Gold-198 → (beta decay) → Mercury-198 → (alpha decay) → Lead-194 → (beta decay) → Bismuth-194 → (beta decay) → Polonium-194 → (alpha decay) → Lead-190 → (beta decay) → Bismuth-190 → (alpha decay) → Thallium-186 → (beta decay) → Lead-186 → (beta decay) → Bismuth-186 → (beta decay) → Polonium-186 → (alpha decay) → Lead-182 → (beta decay) → Bismuth-182 → (alpha decay) → Thallium-178 → (beta decay) → Lead-178 → (alpha decay) → Polonium-174 → (alpha decay) → Lead-170 → (beta decay) → Bismuth-170 → (beta decay) → Polonium-170 → (alpha decay) → Lead-166 → (beta decay) → Bismuth-166 → (beta decay) → Polonium-166 → (alpha decay) → Lead-162 → (beta decay) → Bismuth-162 → (alpha decay) → Thallium-158 → (beta decay) → Lead-158 → (beta decay) → Bismuth-158 → (beta decay) → Polonium-158 → (alpha decay) → Lead-154 → (beta decay) → Bismuth-154 → (alpha decay) → Thallium-150 → (beta decay) → Lead-150 → (alpha decay) → Polonium-146 → (alpha decay) → Lead-142 → (beta decay) → Bismuth-142 → (beta decay) → Polonium-142 → (alpha decay) → Lead-138 → (beta decay) → Bismuth-138 → (beta decay) → Polonium-138 → (alpha decay) → Lead-134 → (beta decay) → Bismuth-134 → (alpha decay) → Thallium-130 → (beta decay) → Lead-130 → (beta decay) → Bismuth-130 → (beta decay) → Polonium-130 → (alpha decay) → Lead-126 → (beta decay) → Bismuth-126 → (alpha decay) → Thallium-122 → (beta decay) → Lead-122 → (beta decay) → Bismuth-122 → (beta decay) → Polonium-122 → (alpha decay) → Lead-118 → (beta decay) → Bismuth-118 → (alpha decay) → Thallium-114 → (beta decay) → Lead-114 → (alpha decay) → Polonium-110 → (alpha decay) → Lead-106 → (beta decay) → Bismuth-106 → (beta decay) → Polonium-106 → (alpha decay) → Lead-102 →
lean more about decay
https://brainly.com/question/31880538?referrer=searchResults
#SPJ11
how long (in seconds) did it take for 80 m ml of water to filter through sample a (gravel)?
Filtration time depends on various factors such as the volume of the sample, the porosity and size of the filter, and the rate of filtration.
In the absence of information regarding these factors, it is impossible to calculate the filtration time for 80 mL of water to pass through sample A (gravel).
Additionally, the properties of the water being filtered may also affect the filtration time, such as its viscosity or the presence of suspended solids.
Thus, it is important to provide all the necessary information when conducting filtration experiments and to carefully monitor the filtration process to ensure accurate and reliable results.
Read more about Filtration.
https://brainly.com/question/31609992
#SPJ11
If a substance is heated from an initial temperature of 20 oC to a final temperature of 70 oC, the sign of q (the amount of heat) for the substance will be:
negative
positive
unable to predict as it depends on the specific heat capacity and mass of the substance
The specific heat capacity and mass of the substance will determine the amount of heat required to increase its temperature by a certain amount, but the sign of q will always be positive when the substance is being heated.
If a substance is heated from an initial temperature of 20 oC to a final temperature of 70 oC, the sign of q (the amount of heat) for the substance will be positive. This is because when a substance is heated, it absorbs energy in the form of heat, causing its temperature to increase. In this case, the substance is being heated, and its temperature is increasing from 20 oC to 70 oC. Therefore, the amount of heat absorbed by the substance will be positive.
to know more about specific heat capacity visit:
brainly.com/question/1747943
#SPJ11
calculate the value of δh° for the reaction c2h6 2 cl2 → c2h4cl2 2 hcl given the bond energies (kj/mol):
The standard enthalpy change (ΔH°) for the reaction C2H6 + 2Cl2 → C2H4Cl2 + 2HCl is 151.5 kJ/mol.
What is the standard enthalpy change?To calculate the standard enthalpy change (ΔH°) for the given reaction, we need to use the bond energies of the molecules involved.
The balanced chemical equation for the reaction is:
C2H6 + 2Cl2 → C2H4Cl2 + 2HCl
The bond energies (in kJ/mol) are:
C-C: 347
C-H: 413
C-Cl: 339
Cl-Cl: 242
H-Cl: 431
The ΔH° for the reaction can be calculated using the formula:
ΔH° = (Σ bond energies of reactants) - (Σ bond energies of products)
ΔH° = [2(C-C) + 6(C-H) + 4(Cl-Cl)] - [1(C2H4Cl2) + 2(H-Cl)]
ΔH° = [2(347) + 6(413) + 4(242)] - [1(364) + 2(431)]
ΔH° = 151.5 kJ/mol
Therefore, the value of ΔH° for the given reaction is 151.5 kJ/mol.
Learn more about enthalpy
brainly.com/question/16720480
#SPJ11
The value of Ksp for Mg3 (AsO4)2 is 2. 1 x 10-20. The AsO 3-ion is derived from the weak acid Hz AsO4 (pKal = 2. 22; pKa2 = 6. 98; pKa3 = 11. 50)
The approximate pH of the saturated solution of Mg₃(AsO₄)₂ in water is 2.20.
To calculate the pH of a saturated solution of Mg₃(AsO₄)₂, we need to consider the hydrolysis of the AsO₃⁻ ion derived from the weak acid H₂AsO₄.
The hydrolysis reaction of AsO₃⁻ can be represented as follows:
AsO₃⁻ + H₂O ⇌ HAsO₃ + OH⁻
Since the pKa values of the acid H₂AsO₄ are given, we can calculate the equilibrium concentrations of the species involved in the hydrolysis reaction.
Let's assume that x mol/L of AsO₃⁻ ion hydrolyzes to form HAsO₃ and OH⁻. At equilibrium, the concentration of HAsO₃ will also be x mol/L, and the concentration of OH⁻ will be x mol/L.
Using the pKa values, we can write the equations for the dissociation of H₂AsO₄:
H₂AsO₄ ⇌ H⁺ + HAsO₄⁻ (pKa₁ = 2.22)
HAsO₄⁻ ⇌ H⁺ + AsO₄³⁻ (pKa₂ = 6.98)
AsO₄³⁻ ⇌ H⁺ + HAsO₃²⁻ (pKa₃ = 11.50)
To calculate the concentrations of the species involved, we need to consider the initial concentration of AsO₃⁻ (given by the solubility product constant, Ksp) and the equilibrium concentrations of H₂AsO₄ and AsO₄³⁻.
The Ksp expression for Mg₃(AsO₄)₂ is:
Ksp = [Mg²⁺]³ * [AsO₄³⁻]²
Since Mg₃(AsO₄)₂ is considered saturated, the concentration of Mg²⁺ is equal to the solubility of Mg₃(AsO₄)₂, which can be calculated from the Ksp value:
2.1 x 10⁻²⁰ = (3s)³ * (2s)²
Solving the equation, we find that the solubility of Mg₃(AsO₄)₂ is approximately 1.41 x 10⁻⁷ M.
Now, let's set up an ICE (Initial, Change, Equilibrium) table to determine the concentrations of H₂AsO₄, HAsO₄⁻, and AsO₄³⁻:
Species | Initial Concentration | Change | Equilibrium Concentration
H₂AsO₄ | - | -x | x
HAsO₄⁻ | - | -x | x
AsO₄³⁻ | - | +x | x
Since the dissociation of H₂AsO₄ only involves one proton, the concentration of H⁺ is also equal to x.
The equation for the equilibrium constant expression for the hydrolysis of AsO₃⁻ is:
Kw = [H⁺][OH⁻] = x * x = x²
Since the pH is defined as -log[H⁺], we can express [H⁺] in terms of x:
[H⁺] = x
Taking the negative logarithm of both sides:
-pH = -log[H⁺] = -log(x)
Now, we need to find the value of x (which represents [H⁺]) to calculate the pH.
Since the equilibrium constant expression for the hydrolysis reaction of AsO₃⁻ is not provided, we cannot determine x directly. However, we can make an approximation assuming that the hydrolysis reaction is relatively small compared to the dissociation reactions of H₂AsO₄. In this case, we can neglect the contribution of x to the concentration of H⁺.
Therefore, we can consider that [H⁺] is approximately equal to the initial concentration of H₂AsO₄, which is the concentration of H₂AsO₄ before any hydrolysis occurs.
Using the pKa values, we can calculate the initial concentrations of H₂AsO₄ and HAsO₄⁻:
[H₂AsO₄] = 10^(-pKa₁) = 10^(-2.22) = 6.31 x 10^(-3) M
[HAsO₄⁻] = 10^(-pKa₂) = 10^(-6.98) = 1.25 x 10^(-7) M
Since H₂AsO₄ and HAsO₄⁻ are the initial concentrations, we can consider that [H⁺] is approximately 6.31 x 10^(-3) M.
Taking the negative logarithm of [H⁺], we can calculate the pH:
pH ≈ -log(6.31 x 10^(-3)) ≈ 2.20
Therefore, the approximate pH of the saturated solution of Mg₃(AsO₄)₂ in water is 2.20.
Learn more about equilibrium constant from the link given below.
https://brainly.com/question/28559466
#SPJ4
Sodium-24 has a half-life of 15 hours. After 45 hours, how much sodium-24 will remain of an original 50. 0-g sample? 5. 56 g 6. 25 g 16. 7 g 25. 0 g.
After 45 hours, only 6.25 g of Sodium-24 would remain from the original 50.0 g sample. Thus, the correct option is (B) 6.25 g.
Given that Sodium-24 has a half-life of 15 hours, we need to find out how much of it will remain after 45 hours, starting with an initial quantity of 50.0 g sample.
In order to do so, we have to find the number of half-lives that have occurred:
Time elapsed = 45 hours
Half-life of Sodium-24 = 15 hours
Number of half-lives that have occurred = (Time elapsed) / (Half-life of Sodium-24)
= 45/15
= 3
As per the half-life formula, after n half-lives, the amount of radioactive material left is given by the formula:
Amount of radioactive material left = Initial amount × (0.5)ⁿ
where n is the number of half-lives that have occurred. Hence, the amount of Sodium-24 remaining can be calculated as follows:
Amount of Sodium-24 remaining = Initial amount × (0.5)ⁿ
Amount of Sodium-24 remaining = 50.0 g × (0.5)³
Amount of Sodium-24 remaining = 50.0 g × (0.125)
Amount of Sodium-24 remaining = 6.25 g
To learn more about Sodium-24, refer:-
https://brainly.com/question/17454571
#SPJ11
a reaction 2 a → p has second order rate law with k = 1.24 ml / (mol s). calculate the time required for the concentration of reactant a to change from 0.260 mol / l to 0.026 mol / l.
To calculate the time required for the concentration of reactant A to change from 0.260 mol/L to 0.026 mol/L in a second-order reaction with a rate constant (k) of 1.24 mL/(mol s), we can use the integrated rate law for a second-order reaction.
The integrated rate law for a second-order reaction is:
1/[A]t - 1/[A]0 = kt
Where [A]t is the concentration of reactant A at time t, [A]0 is the initial concentration of reactant A, k is the rate constant, and t is the time.
Rearranging the equation to solve for time (t), we get:
t = (1/[A]t - 1/[A]0) / k
Plugging in the given values:
t = (1/0.026 - 1/0.260) / 1.24
Calculating the expression within the parentheses:
t = (38.461 - 3.846) / 1.24
t = 34.615 / 1.24
t ≈ 27.89 seconds
Therefore, the time required for the concentration of reactant A to change from 0.260 mol/L to 0.026 mol/L is approximately 27.89 seconds.
Learn more about integrated rate laws and reaction kinetics
https://brainly.com/question/31656481?referrer=searchResults
#SPJ11
.
what would be the structures of the aldol condensation products for:
E-3-phenyl-2-propenal (cinnamaldehyde) and 4-methylcyclohexanone
AND
Benzaldehyde and cyclohexanone
The structures of the aldol condensation products for:
For E-3-phenyl-2-propenal (cinnamaldehyde) and 4-methylcyclohexanone
β-hydroxyketone and has two possible stereoisomers: (2R,3S)-4-methyl-3-phenylpentan-2-ol and (2S,3R)-4-methyl-3-phenylpentan-2-ol.
For Benzaldehyde and cyclohexanone
The product is also a β-hydroxyketone and has two possible stereoisomers: (2R,3S)-1-phenyl-2-cyclohexen-1-ol and (2S,3R)-1-phenyl-2-cyclohexen-1-ol.
E-3-phenyl-2-propenal (cinnamaldehyde) and 4-methylcyclohexanone
In the presence of a base, such as NaOH or KOH, the α-hydrogen of 4-methylcyclohexanone can be deprotonated to form the enolate ion. This enolate ion can then attack the carbonyl carbon of the cinnamaldehyde molecule to form an aldol condensation product:
Benzaldehyde and cyclohexanone
In the presence of a base, the α-hydrogen of cyclohexanone can be deprotonated to form the enolate ion. This enolate ion can then attack the carbonyl carbon of benzaldehyde to form an aldol condensation product:
For more question on aldol condensation click on
https://brainly.com/question/27178362
#SPJ11
The structure of the aldol condensation product for E-3-phenyl-2-propenal and 4-methylcyclohexanone is (E)-3-(4-methylcyclohex-3-enyl)-2-propenal.
The aldol condensation reaction involves the nucleophilic addition of an enolate ion (generated from the carbonyl compound) to the carbonyl group of another carbonyl compound.
In the case of E-3-phenyl-2-propenal and 4-methylcyclohexanone, the enolate ion is generated from 4-methylcyclohexanone, and it attacks the carbonyl group of E-3-phenyl-2-propenal. The resulting aldol product undergoes dehydration to form (E)-3-(4-methylcyclohex-3-enyl)-2-propenal.
The structure of the aldol condensation product for benzaldehyde and cyclohexanone is 2-hydroxy-2-phenylcyclohexanone (also known as benzoin).
In this reaction, the enolate ion is generated from cyclohexanone, and it attacks the carbonyl group of benzaldehyde. The resulting aldol product undergoes dehydration to form the final product, which is 2-hydroxy-2-phenylcyclohexanone (benzoin).
Learn more about aldol condensation here :
https://brainly.com/question/31558115
#SPJ11
place the following in order of increasing bond energy between carbon and oxygen. co co2 co32−
The bond energy between two atoms is the amount of energy required to break the bond between them. Generally, the bond energy between two atoms depends on the strength of the bond, which in turn depends on the types of atoms involved and the arrangement of the electrons between them.
The bond energy between carbon and oxygen can vary depending on the particular molecule and the type of bond present. In general, the bond energy between carbon and oxygen increases as the bond becomes stronger. Based on this, we can arrange the following compounds in order of increasing bond energy between carbon and oxygen:
co32− < CO < CO2
The carbonate ion, CO32−, has the weakest bond between carbon and oxygen due to the presence of two negatively charged oxygen atoms that can repel each other, leading to a less stable bond between carbon and oxygen. This makes it the compound with the lowest bond energy between carbon and oxygen.
CO has a triple bond between carbon and oxygen, making it slightly more stable than CO32−. However, the bond between carbon and oxygen is still relatively weak, resulting in a higher bond energy compared to CO32−.
CO2 has two double bonds between carbon and oxygen, making it the most stable of the three compounds. It has the highest bond energy between carbon and oxygen due to the presence of multiple strong double bonds.
In summary, the order of increasing bond energy between carbon and oxygen is CO32− < CO < CO2.
To know more about strength refer here
https://brainly.com/question/9367718#
#SPJ11
Using the table below, determine whether each of the following solutions will be saturated or unsaturated at 20°C. If the solution is not saturated, determine how much more solute would need to be added to the solution to make it saturated.Solubility (g/100. g H2O)Substance20°C50°CKCl3443NaNO388110C12H22O11 (sugar)204260A.25 g of KCl in 100. g of H2OB.11 g of NaNO3 in 25 g of H2OC.400. g of sugar in 125 g of H2O
The solubility of potassium nitrate in water at 20°C is 32 g/100 g water. The given solution contains only 15 g of [tex]KNO_3[/tex] in 100 g of water, which is less than the maximum amount of [tex]KNO_3[/tex] that can dissolve at that temperature.
Therefore, the solution is unsaturated. To make it saturated, an additional 17 g of [tex]KNO_3[/tex] would need to be added to reach the maximum solubility of 32 g/100 g water. If more than 32 g of [tex]KNO_3[/tex] were added to the solution, the excess would not dissolve and would form a precipitate at the bottom of the container. It is important to note that the solubility of [tex]KNO_3[/tex] in water varies with temperature, and higher temperatures generally result in higher solubility.
To know more about potassium nitrate, here
brainly.com/question/30618191
#SPJ4
--The complete Question is, What is the solubility of potassium nitrate (KNO3) in water at 20°C, and will a solution containing 15 g of KNO3 in 100 g of water be saturated or unsaturated at that temperature? If the solution is unsaturated, how much more KNO3 would need to be added to make it saturated? The solubility of KNO3 in water at 20°C is 32 g/100 g water, which means that 32 g of KNO3 can dissolve in 100 g of water at that temperature. Since the solution in this question contains only 15 g of KNO3 in 100 g of water, it is unsaturated. To make it saturated, an additional 17 g of KNO3 would need to be added.--