how many of the following molecules are nonpolar? answer as 1, 2, 3 or 4. brf3 cs2 sif4 so3

Answers

Answer 1

Out of the given molecules, two of them are nonpolar, CS2 and SO3.

CS2 is nonpolar because it has a linear geometry and its atoms are arranged symmetrically around the central carbon atom, which cancels out the polarity of the two carbon-sulfur bonds. Similarly, SO3 is nonpolar because it has a trigonal planar geometry, with three oxygen atoms arranged symmetrically around the central sulfur atom, which cancels out the polarity of the three sulfur-oxygen bonds.

On the other hand, BrF3 and SiF4 are polar molecules. BrF3 has a trigonal bipyramidal geometry, with three fluorine atoms and two lone pairs of electrons around the central bromine atom. The electronegativity difference between bromine and fluorine creates a polar molecule, with partial positive and negative charges on different ends of the molecule. SiF4 has a tetrahedral geometry, with four fluorine atoms arranged symmetrically around the central silicon atom. However, the electronegativity difference between silicon and fluorine creates a polar molecule, with partial positive and negative charges on different ends of the molecule.

Know more about Trigonal planar geometry here:

https://brainly.com/question/30185738

#SPJ11


Related Questions

Consider the combustion of propane gas: C3H8(g)+5O2(g)→3CO2(g)+4H2O(g) , ΔHrxn=−2044kJ Calculate the entropy change in the surroundings when this reaction occurs at 25 ∘C. Express your answer in joules per kelvin to three significant figures.

Answers

The entropy change in the surroundings when the combustion of propane gas occurs at 25°C is 348 J/K.

Use the equation ΔS = -ΔHrxn/T, where ΔS is the entropy change in the surroundings, ΔHrxn is the enthalpy change of the reaction, and T is the temperature in Kelvin.

Convert the temperature from Celsius to Kelvin: T = 25°C + 273.15 = 298.15 K.

Convert ΔHrxn from kJ to J: ΔHrxn = -2044 kJ/mol × 1000 J/kJ = -2.044 × [tex]10^6 J/mol[/tex].

Use the stoichiometry of the reaction to determine the number of moles of propane gas: 1 mole of propane gas.

Calculate the entropy change in the surroundings: ΔS = -(-2.044 × [tex]10^6[/tex]J/mol)/(298.15 K) = 6844.9 J/(mol*K).

Divide by the number of moles of propane gas to get the entropy change per mole: ΔS/mol = 6844.9 J/(mol*K).

Convert from per mole to per kelvin: ΔS/K = ΔS/mol ÷ 1 mol = 6844.9 J/K.

Round to three significant figures: ΔS/K = 348 J/K.

For more such questions on Entropy, click on:

https://brainly.com/question/30481619

#SPJ11

Rounding to three significant figures, the entropy change in the surroundings when the combustion of propane gas occurs at 25 °C is 0.573 J/K.

Too calculate the entropy change in the surroundings when the combustion of propane gas occurs, we need to use the equation:

ΔSsurroundings = -ΔHrxn / T

Where ΔHrxn is the enthalpy change of the reaction and T is the temperature in Kelvin.

From the given equation, ΔHrxn is -2044 kJ/mol. To convert this to joules per kelvin, we need to divide by the number of moles involved in the reaction.

Since the balanced equation shows that 1 mole of C3H8 produces 3 moles of CO2 and 4 moles of H2O, the total number of moles involved is:

1 + 5 + 3 + 4 = 13 moles

So the enthalpy change per mole is:

-2044 kJ/mol / 13 mol = -157.23 kJ/mol

Now we can calculate the entropy change in the surroundings:

ΔSsurroundings = -(-157.23 kJ/mol) / (25 + 273.15) K = 0.573 J/K

Rounding to three significant figures, the entropy change in the surroundings when the combustion of propane gas occurs at 25 °C is 0.573 J/K.


Learn more about entropy change here:

https://brainly.com/question/30691597


#SPJ11

Hemistry in the Earth System - 2019


Step 7: Put the Metal in the Water and Measure


Temperature Changes (Lead)


Measure the initial temperature of the water to the


nearest 0. 1°C. Record in the data table.


Initial temperature of metal = 1


PC


Initial temperature of water =


PC


Final temperature of both =


°C


27


=-O


DONE


26


25


24


23


200


21


250 ml


150


100


50


Continue


) Intro

Answers

In addition, the initial temperature of the metal is given as 1 PC and the final temperature is given as 27°C.

The given information is related to measuring temperature changes of a metal (Lead) when put in water. As per the given information, the initial temperature of the water should be measured to the nearest 0.1°C and recorded in the data table.

The initial temperature of the metal and the initial temperature of water should be recorded in the data table and the final temperature of both should be recorded as well.In the given information, the initial temperature of the water is not given. Therefore, we cannot mention the value of the initial temperature of water. In addition, the initial temperature of the metal is given as 1 PC and the final temperature is given as 27°C. However, we cannot determine the temperature change of the metal from the given information. Please provide the complete information so that I can provide you with a detailed answer.

Learn more about temperature  here:

https://brainly.com/question/23411503

#SPJ11

fix any errors in these proposed electron configurations. number of electrons in atom configuration: 31 proposed electron: 1s^2 2s^2 2p^6 2d^10 3s^2 3p^6 3d^1 4s^2

Answers

There is an error in the proposed electron configuration for the atom with 31 electrons. The correct electron configuration would be: [tex]1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^1[/tex]

In the proposed configuration, there is an extra [tex]2d^{10}[/tex] subshell. However, the 2d subshell does not exist. The subshells are labeled as 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, and so on. Therefore, the configuration must continue with [tex]3d^1[/tex] before filling the 4s subshell.
It is important to note that electron configurations follow the Aufbau principle, which states that electrons fill orbitals in order of increasing energy. Each orbital can hold a maximum of two electrons, with opposite spins. Therefore, it is essential to follow the correct order of subshells to determine the correct electron configuration.
In summary, the corrected electron configuration for an atom with 31 electrons is:
[tex]1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^1[/tex].

To learn more about electron configuration, refer:-

https://brainly.com/question/29157546

#SPJ11

the average speed at which a nitrogen molecule effuses at 30.0 °c is 480 m/s. what should the average speed at which a butene molecule (c4h8) effuses at the same temperature?

Answers

The average speed at which a butene molecule effuses at 30.0 °C is approximately 348 m/s.

The rate of effusion of a gas is related to the average speed of its molecules. According to Graham's law, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. Therefore, if we know the rate of effusion and molar mass of one gas, we can use this relationship to calculate the rate of effusion for another gas.

In this case, we are given the average speed at which a nitrogen molecule effuses at 30.0 °C, which is 480 m/s. To find the average speed at which a butene molecule (C4H8) effuses at the same temperature, we need to calculate the ratio of the rates of effusion of butene and nitrogen, using their molar masses.

The molar mass of nitrogen is 28.02 g/mol, while the molar mass of butene is 56.11 g/mol. Therefore, the ratio of their rates of effusion is:

rate of effusion (butene) / rate of effusion (nitrogen) = √(molar mass (nitrogen) / molar mass (butene))

rate of effusion (butene) / 480 m/s = √(28.02 g/mol / 56.11 g/mol)

Solving for the rate of effusion of butene, we get:

rate of effusion (butene) = 480 m/s x √(molar mass (nitrogen) / molar mass (butene))

rate of effusion (butene) = 480 m/s x √(28.02 g/mol / 56.11 g/mol)

rate of effusion (butene) = 348 m/s (approx.)

Therefore, the average speed at which a butene molecule effuses at 30.0 °C is approximately 348 m/s. This is slower than the average speed of nitrogen molecules, because butene is a larger molecule with a higher molar mass, and according to Graham's law, larger molecules effuse more slowly than smaller ones.

To know more about effusion rates, refer to the link below:

https://brainly.com/question/2655041#

#SPJ11

Calculate the energy required to heat up 65.0 mL of the sample.50g t1= 12t2 =78

Answers

To calculate the energy required to heat up a sample, we can use the formula:

Q = m * c * ΔT

where Q is the energy required (in Joules), m is the mass of the sample (in grams), c is the specific heat capacity of the material (in J/g°C), and ΔT is the change in temperature (in °C).

In this case, we are given:

m = 50 g (mass of the sample)

ΔT = t2 - t1 = 78°C - 12°C = 66°C (change in temperature)

However, we need to convert the volume (65.0 mL) to mass in order to use the formula. We can do this by multiplying the volume by the density of the material. Let's assume the material is water, which has a density of 1 g/mL at room temperature:

V = 65.0 mL (volume of the sample)

ρ = 1 g/mL (density of water at room temperature)

So, the mass of the sample is:

m = V * ρ = 65.0 mL * 1 g/mL = 65.0 g

Now we can calculate the energy required:

Q = m * c * ΔT = 65.0 g * 4.18 J/g°C * 66°C = 17379.6 J

Therefore, the energy required to heat up 65.0 mL of water (assuming it's water) from 12°C to 78°C is approximately 17379.6 J.

To know more about refer heat here

brainly.com/question/13155544#

#SPJ11

Select the factor that stabilizes the nucleophilic carbon atom in a base-catalyzed aldol condensation.
the high concentration of Na^+ in a. the reaction mixture b. an adjacent electron-withdrawing group c. an adjacent electron-donating group
d. the high concentration of H^+ in the reaction mixture

Answers

The factor that stabilizes the nucleophilic carbon atom in a base-catalyzed aldol condensation is option B which is an adjacent electron-withdrawing group.

Nucleophilic carbon explanation.

In a base catalyzed aldol condensation, the nucleophilic carbon atom is stabilized by an adjacent electron withdrawing group. This electron withdrawing group helps to delocalise the negative charge that develops on the carbon atom during the reaction. It can withdraw the electron density from the carbon atom through resonance or inductive effects, reducing the electron density and stabilizing the negative charge.

The stabilization is important because it helps to lower the energy of the intermediate formed during the reaction, making the reaction more favorable and facilitating the formation of the aldol product.

This stabilization is important in nucleophilic carbon because it helps to lower the energy of the intermediate formed during the reaction, making the reaction more favorable and facilitating the formation of the aldol product.

Learn more  about nucleophilic carbon below.

https://brainly.com/question/16033779

#SPJ1

Once the beverage has been opened, why does it maintain more carbonation when refrigerated than at room temperature?

Answers

Refrigerating carbonated beverages helps to maintain carbonation by increasing  Carbon dioxide gas solubility, reducing vapor pressure, and promoting an equilibrium pressure that keeps Carbon dioxide gas dissolved in liquid. This prevents rapid release of  Carbon dioxide gas.



Firstly, the solubility of carbon dioxide (CO2) in water increases at lower temperatures. When a beverage is refrigerated, the lower temperature allows more  Carbon dioxide gas to dissolve and stay in the liquid. Conversely, at room temperature, the solubility of  Carbon dioxide gas decreases, leading to more  Carbon dioxide gas escaping into the air and the beverage losing its fizziness.



Secondly, temperature affects the equilibrium between dissolved  Carbon dioxide gas and gaseous  Carbon dioxide gas . A lower temperature reduces the vapor pressure of  Carbon dioxide gas above the liquid, making it harder for  Carbon dioxide gas molecules to escape.

As a result, more  Carbon dioxide gas remains dissolved in the beverage, maintaining its carbonation. At higher temperatures, such as room temperature, the increased vapor pressure causes  Carbon dioxide gas to escape more easily, reducing the carbonation.


Lastly, pressure plays a role in maintaining carbonation. A closed container creates pressure, helping to keep  Carbon dioxide gas dissolved in the liquid. Once the container is opened, the pressure decreases, allowing  Carbon dioxide gas to escape. When refrigerated, the lower temperature helps to maintain the equilibrium pressure and reduce the rate of  Carbon dioxide gas release, keeping the beverage fizzy.

Know more about carbonated beverages here:

https://brainly.com/question/2029096

#SPJ11

use the periodic table to determine the number of 3p electrons in si .

Answers

Silicon (Si) has 4 electrons in its 3p subshell.


1. Locate Silicon (Si) on the periodic table. You will find that its atomic number is 14, which means it has 14 electrons in total.
2. To determine the electron configuration, we can use the Aufbau principle, which states that electrons occupy the lowest energy levels available.
3. The electron configuration of Si can be written as 1s² 2s² 2p⁶ 3s² 3p².
4. Focus on the 3p subshell, as indicated by the "3p" term in the electron configuration. The superscript (²) tells us there are 4 electrons in the 3p subshell.

Using the periodic table and the Aufbau principle, we determined that Silicon (Si) has 4 electrons in its 3p subshell.

To know more about subshell, visit;

https://brainly.com/question/28765634

#SPJ11

complete the following radioactive decay equation: 226/90th --> ________ 0 1e

Answers

The complete radioactive decay equation is 226/90Th → 222/88Ra + 4/2He.The given radioactive decay equation is missing the products formed after the decay of 226/90Th. Radioactive decay is a spontaneous process in which an unstable nucleus undergoes a transformation to become a more stable nucleus by emitting particles or energy.

In the given equation, 226/90Th undergoes alpha decay where it emits an alpha particle (4/2He) from its nucleus. As a result, the atomic number decreases by 2 and the mass number decreases by 4. Therefore, the products formed after the decay of 226/90Th are 222/88Ra and 4/2He.


Radioactive decay is an important concept in nuclear physics that describes the process by which an unstable nucleus undergoes a transformation to become a more stable nucleus. There are different types of radioactive decay processes, including alpha decay, beta decay, and gamma decay. In alpha decay, an alpha particle (4/2He) is emitted from the nucleus of the parent atom, resulting in a decrease in the atomic number by 2 and the mass number by 4. Beta decay involves the emission of a beta particle (an electron or a positron) from the nucleus, leading to a change in the atomic number but no change in the mass number. Gamma decay is a high-energy photon emission that occurs after alpha or beta decay, leading to a decrease in the energy of the nucleus.

In the given radioactive decay equation, 226/90Th undergoes alpha decay where it emits an alpha particle (4/2He) from its nucleus. The atomic number of Th is 90, and the mass number is 226. After the decay, the atomic number decreases by 2 to become 88, and the mass number decreases by 4 to become 222. Therefore, the products formed after the decay of 226/90Th are 222/88Ra and 4/2He.

In conclusion, the complete radioactive decay equation for the given decay process is 226/90Th → 222/88Ra + 4/2He.

To know more about Radioactive decay, visit:

https://brainly.com/question/1770619

#SPJ11

Part A How many grams of copper react to give 1.70 g of Ag? Cu(s) + 2 AgNO3(aq) + Cu(NO3)2(aq) + 2 Ag(s) Express your answer with the appropriate units.

Answers

0.50 grams of copper will react to give 1.70 grams of silver react to give 1.70 g of Ag? Cu(s) + 2 AgNO₃(aq) + Cu(NO₃)²(aq) + 2 Ag(s).

To find the grams of copper that react to give 1.70 g of silver (Ag), we will first need to determine the molar masses of copper (Cu) and silver (Ag), and then use stoichiometry.
The molar mass of Cu is approximately 63.55 g/mol, and the molar mass of Ag is approximately 107.87 g/mol.
First, convert the mass of Ag to moles using its molar mass:
1.70 g Ag × (1 mol Ag / 107.87 g Ag) ≈ 0.01576 mol Ag
Next, use the stoichiometric ratio from the balanced equation. For every 2 moles of Ag produced, 1 mole of Cu reacts:
0.01576 mol Ag × (1 mol Cu / 2 mol Ag) ≈ 0.00788 mol Cu
Finally, convert the moles of Cu to grams using its molar mass:
0.00788 mol Cu × (63.55 g Cu / 1 mol Cu) ≈ 0.50 g Cu
So, approximately 0.50 grams of copper will react to give 1.70 grams of silver.

Learn more about molar mass here

https://brainly.com/question/22997914

#SPJ11

Draw one of the two enantiomers of the major product from this reaction. Use wedge and dash bonds to indicate stereochemistry where appropriate. Ignore inorganic byproducts. 1. BH3-THF 2. H2O2, NaOH

Answers

The given reaction involves two steps: 1) Hydroboration with BH3-THF, and 2) Oxidation with H₂O₂ and NaOH. The major product for this reaction is an anti-Markovnikov alcohol. The stereochemistry for the reaction is syn addition.


1. In the first step, hydroboration with BH₃-THF occurs, which involves the addition of a boron atom and a hydrogen atom to the alkene. This reaction follows an anti-Markovnikov rule, meaning that the hydrogen atom adds to the more substituted carbon while the boron atom adds to the less substituted carbon. It also has syn stereochemistry, meaning that both the boron and the hydrogen atoms add from the same side of the molecule.
2. In the second step, oxidation with H₂O₂ and NaOH takes place. The boron atom is replaced by a hydroxyl group (OH). This step maintains the stereochemistry set in the first step.


To draw one of the two enantiomers of the major product, consider the stereochemistry established during the reaction (syn addition). Use wedge and dash bonds to indicate the relative positions of the hydroxyl group and the hydrogen atom added to the alkene. The resulting molecule will be an anti-Markovnikov alcohol. Note that the other enantiomer will have the opposite configuration of stereochemistry but with the same connectivity.

To know more about enantiomers, click here

https://brainly.com/question/21506956

#SPJ11

consider the reaction of 75.0 ml of 0.350 m c₅h₅n (kb = 1.7 x 10⁻⁹) with 100.0 ml of 0.425 m hcl. what quantity in moles of c₅h₅n would be present before the reaction takes place?

Answers

The quantity in moles of C₅H₅N present before the reaction takes place is 0.0263 moles

To determine the quantity in moles of C₅H₅N present before the reaction takes place, we can use the formula:

moles = concentration x volume

First, we need to calculate the moles of HCl:

moles of HCl = concentration x volume
moles of HCl = 0.425 M x 0.100 L
moles of HCl = 0.0425 moles

Since the reaction between C₅H₅N and HCl is a 1:1 ratio, the moles of C₅H₅N present before the reaction takes place will be equal to the moles of HCl:

moles of C₅H₅N = 0.0425 moles

Now, we can use the volume and concentration of C₅H₅N to calculate the initial moles:

moles of C₅H₅N = concentration x volume
moles of C₅H₅N = 0.350 M x 0.0750 L
moles of C₅H₅N = 0.0263 moles

Therefore, the quantity in moles of C₅H₅N present before the reaction takes place is 0.0263 moles.

To know more about Mole refer here :

https://brainly.com/question/29367909

#SPJ11

50 mL of unknown concentration of HBr is titrated with 0.500M KOH. It is found that to complete neutralization, 75mL of KOH was used. What was the original volume of HBr that was titrated ?

Answers

The original volume of HBr that was titrated can be calculated as the ratio of the moles of HBr to its concentration.

To determine the original volume of HBr that was titrated, we can use the concept of stoichiometry and the equation balanced for the neutralization reaction between HBr and KOH.

The balanced equation is:

HBr + KOH → KBr + H₂O

From the balanced equation, we can see that the stoichiometric ratio between HBr and KOH is 1:1. This means that for every mole of HBr, we need an equal number of moles of KOH to complete neutralization.

First, let's determine the moles of KOH used in the titration:

Moles of KOH = 0.500 M × 0.075 L = 0.0375 mol

Since the stoichiometric ratio is 1:1, this also represents the number of moles of HBr that were neutralized.

Now, we can calculate the original volume of HBr using the concentration of the unknown solution:

Moles of HBr = 0.0375 mol

Concentration of HBr = unknown (let's assume it is C mol/L)

Volume of HBr = Moles of HBr / Concentration of HBr = 0.0375 mol / C mol/L

For more such questions on volume

https://brainly.com/question/14197390

#SPJ11

How would an increase in pressure affect the [H2] in the following reactions? 2H, 6) + O2(g) = 2H0 ). 4H, ) + Fe (s) = 3 Fe (s) + 4 H 0 (). H, () + C1, () = 2 HCI (9)_

Answers

An increase in pressure would not significantly affect the [H2] in the given reactions.

Would an increase in pressure have a notable impact on the [H2] in these reactions?

In the reactions provided, the concentration of hydrogen gas ([H2]) is not directly affected by changes in pressure. This is because [H2] is not a reactant or product whose concentration is influenced by changes in pressure, according to the balanced chemical equations.

In the first reaction, the combustion of hydrogen gas (2H2(g) + O2(g) → 2H2O(g)), increasing the pressure would not alter the concentration of hydrogen gas. The stoichiometric coefficients of hydrogen gas remain unchanged.

Similarly, in the second reaction (4HCl(g) + Fe(s) → 2H2(g) + FeCl3(s)), altering the pressure would not affect the concentration of hydrogen gas. The stoichiometric coefficients for hydrogen gas again remain constant.

Lastly, in the third reaction (H2(g) + Cl2(g) → 2HCl(g)), increasing the pressure would not directly modify the concentration of hydrogen gas. The balanced equation already accounts for the appropriate stoichiometric coefficients.

It's important to note that while an increase in pressure may impact other aspects of these reactions (such as the equilibrium position or reaction rates), the concentration of hydrogen gas ([H2]) would remain unaffected.

Learn more about pressure

brainly.com/question/30673967

#SPJ11

A radioactive isotope initially has an activity of 400,000 Bq.Two days after the sample is collected,its activity is observed to be 170,000 Bq.What is the half-life of this isotope

Answers

The half-life of the radioactive isotope is approximately 1.42 days.


1. First, let's determine the decay constant (k) using the initial activity (A₀ = 400,000 Bq) and the observed activity after two days (A = 170,000 Bq).
2. Use the radioactive decay formula: A = A₀ * e^(-kt), where A is the observed activity, A₀ is the initial activity, k is the decay constant, and t is the time elapsed (in this case, 2 days).
3. Rearrange the formula to find k: k = -(1/t) * ln(A/A₀) = -(1/2) * ln(170,000/400,000).
4. Calculate k: k ≈ 0.4866.
5. Now, we can find the half-life (T) using the decay constant (k) and the formula T = ln(2)/k.
6. Calculate the half-life: T ≈ 1.42 days.

The half-life of the radioactive isotope is approximately 1.42 days, given the initial activity of 400,000 Bq and the observed activity of 170,000 Bq after two days.

To know more about half-life, visit;

https://brainly.com/question/1160651

#SPJ11

What is the definition of ionic bond

Answers

An ionic bond is a type of chemical bond that occurs between two atoms when there is a large difference in their electronegativity values.

It involves the transfer of electrons from one atom to another, resulting in the formation of ions. One atom, known as the cation, loses electrons and becomes positively charged, while the other atom, called the anion, gains those electrons and becomes negatively charged. Ionic bonds typically form between a metal and a non-metal. The metal atom tends to lose electrons, while the non-metal atom tends to gain electrons. This transfer of electrons creates a strong electrostatic attraction between the oppositely charged ions, leading to the formation of a solid crystal lattice structure. Due to their electrostatic nature, ionic bonds are typically characterized by high melting and boiling points. They also exhibit good electrical conductivity when dissolved in water or molten state, as the ions are free to move and carry electric charges. Ionic compounds, also known as salts, are formed through ionic bonding and are commonly found in everyday substances like table salt (sodium chloride) and calcium carbonate.

for more questions on ionic
https://brainly.com/question/1310794
#SPJ11

simplify the expression by combining like terms: 5b2 + 9b + 10 + 3b + 2b2−4.

Answers

Answer: 7b² + 12b + 6

Explanation:

I am going to assume that by 5b2 and 2b2, it is meant to be 5b² and 2b².

Given:

     5b² + 9b + 10 + 3b + 2b² − 4

Reorder by like terms (terms that have the same degree):

     5b² + 2b² + 9b + 3b + 10 − 4

Combine like terms (add and/or subtract terms with the same degree):

➜ 5 + 2 = 7

➜ 9 + 3 = 12

➜ 10 - 4 = 6

     7b² + 12b + 6

To simplify the expression by combining like terms, we need to group together the terms Catalysis that have the same variable and the same exponent. 5b2 + 9b + 10 + 3b + 2b2 − 4 the results from step 2: 7b² + 12b + 6.

The expression given has terms with different variables and exponents. To simplify the expression, we need to group together the terms that have the same variable and exponent.  So, we rearrange the terms in the expression by collecting the like terms. In this case, we group the b2 terms together and the b terms together. We also group the constant terms together.

Identify like terms. In this case, the like terms are the terms with the same variable and exponent. We have three sets of like terms: b² terms (5b² and 2b²), b terms (9b and 3b), and constants (10 and -4).
Combine the like terms by adding or subtracting them. - Add the b² terms: 5b² + 2b² = 7b - Add the b terms: 9b + 3b = 12b- Add the constants: 10 + (-4) = 6
To know more about Catalysis visit:

https://brainly.com/question/30417381

#SPJ11

cyanide is a non-competitive inhibitor of cytochrome c oxidase. what km would you expect if you treated 12µm cytochrome oxidase with enough cyanide to lower the enzymes vmax to 40 units of activity?

Answers

The [tex]K_m[/tex] value would remain at 12 µM after treatment with enough cyanide to lower the enzyme's [tex]V_m_a_x[/tex] to 40 units of activity.

Since cyanide is a non-competitive inhibitor of cytochrome c oxidase, the Km value of the enzyme will remain unchanged after treatment with cyanide. Cyanide is a non-competitive inhibitor of cytochrome c oxidase, which means that it binds to the enzyme at a site other than the active site, and does not directly interfere with substrate binding.

Therefore, we can use the Michaelis-Menten equation to solve for the  [tex]K_m[/tex]value:


[tex]V_m_a_x[/tex] = ([tex]V_m_a_x[/tex] / [tex]K_m[/tex]) [S] +[tex]V_m_a_x[/tex]

Rearranging the equation, we get:

[tex]K_m[/tex] = ([S] ([tex]V_m_a_x[/tex]/40)) - [S]

We know that [S] = 12 µM and [tex]V_m_a_x[/tex] = 40 units of activity. Plugging in these values, we get:

[tex]K_m[/tex] = (12 µM x 40 units of activity/40 units of activity) - 12 µM

[tex]K_m[/tex] = 0 µM

Therefore, the Km value would remain at 12 µM after treatment with enough cyanide to lower the enzyme's [tex]V_m_a_x[/tex] to 40 units of activity.

To know more about enzyme refer here :

https://brainly.com/question/31621283

#SPJ11

a gas sample contains 4.63 g n2 in a 2.20 l container at 38 0c. what is the pressure of this sample?

Answers

The pressure of the gas sample containing 4.63 g N₂ in a 2.20 L container at 38°C is 3.05 atm.

We can use the ideal gas law to solve for the pressure of the gas sample:

PV = nRT

\where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the mass of N₂ to moles:

moles of N₂ = 4.63 g / 28.01 g/mol = 0.165 mol

Next, we convert the temperature to Kelvin:

T = 38°C + 273.15 = 311.15 K

Now we can plug in the values and solve for P:

P = nRT / V = (0.165 mol)(0.08206 L·atm/mol·K)(311.15 K) / 2.20 L

P = 3.05 atm

Therefore, the pressure of the gas sample is 3.05 atm.

To know more about the gas sample refer here :

https://brainly.com/question/29388117#

#SPJ11

For which order reaction is the half-life of the reaction proportional to 1/k (k is the rate constant)? A Zero order B. First order c. Second order D. All of the above

Answers

Answer:

The correct answer is option b.

Explanation:

where [A]₀ is the initial concentration of reactant and k is the rate constant. Here half-life is proportional to 1/2_k_. Hence this option can be neglected.b) Half-life of a first-order reaction is as follows:t1/2=0.693kHere half-life is proportional to 1/k, hence this option is the correct choice.c) Half-life of a second-order reaction is as follows:t1/2=1k[A]0Here, the half-life is proportional to 1/k [A]₀. Hence this option can be neglected.d) This option can be neglected as (b) is the only correct choice.

From a laboratory process designed to separate magnesium chloride [MgCl2] into magnesium metal [Mg] and chlorine gas [Cl2], a student collected 35. 45 grams of chlorine and 12. 15 grams of magnesium. How much magnesium chloride salt (in grams) was involved in the process?

Answers

In the laboratory process, 35.45 grams of chlorine and 12.15 grams of magnesium were collected. The amount of magnesium chloride salt involved in the process is 47.61 grams.

To calculate the amount of magnesium chloride salt involved in the process, we can use the stoichiometry of the reaction. The balanced equation for the reaction is:

[tex]2MgCl_2 \rightarrow 2Mg + Cl_2[/tex]

From the equation, we can see that for every 2 moles of magnesium chloride ([tex]MgCl_2[/tex]), we obtain 1 mole of magnesium (Mg) and 1 mole of chlorine gas ([tex]Cl_2[/tex]).

First, we need to convert the given masses of chlorine and magnesium into moles. The molar mass of chlorine ([tex]Cl_2[/tex]) is 70.90 g/mol, and the molar mass of magnesium (Mg) is 24.31 g/mol.

Number of moles of chlorine = 35.45 g / 70.90 g/mol = 0.5 mol

Number of moles of magnesium = 12.15 g / 24.31 g/mol = 0.5 mol

Since the stoichiometry ratio is 1:2 for magnesium chloride to magnesium, the number of moles of magnesium chloride involved is the same as the number of moles of magnesium.

Therefore, the amount of magnesium chloride salt involved in the process is 0.5 mol, which can be converted to grams by multiplying it by the molar mass of magnesium chloride (95.21 g/mol).

Mass of magnesium chloride = 0.5 mol × 95.21 g/mol = 47.61 grams

So, the amount of magnesium chloride salt involved in the process is 47.61 grams.

Learn more about molar mass here:

https://brainly.com/question/12127540

#SPJ11

how many total possible stereoisomers are there for 1,2-dimethylcyclopropane?

Answers

There are two possible stereoisomers for 1,2-dimethylcyclopropane: cis-1,2-dimethylcyclopropane and trans-1,2-dimethylcyclopropane.

In order to determine the total possible stereoisomers for 1,2-dimethylcyclopropane, we need to consider the types of isomers that can be formed. For this compound, the two types of stereoisomers are cis and trans isomers.

Cis isomer: Both methyl groups are on the same side of the cyclopropane ring.
Trans isomer: The methyl groups are on opposite sides of the cyclopropane ring.

Since there are two types of stereoisomers (cis and trans) for 1,2-dimethylcyclopropane, the total possible stereoisomers are 2.

To know about stereoisomers visit:

https://brainly.com/question/31147524

#SPJ11

calculate the grams of ethane present in a sample containing 0.2026 moles if the molar mass of ethane is 30.067 g/mo

Answers

To calculate the grams of ethane present in a sample containing 0.2026 moles, we use the formula: Grams of ethane = Moles of ethane x Molar mass of ethane

Substituting the given values, we get:

Grams of ethane = 0.2026 mol x 30.067 g/mol
Grams of ethane = 6.090 g

Therefore, the sample contains 6.090 grams of ethane.

To calculate the grams of ethane present in a sample containing 0.2026 moles with a molar mass of 30.067 g/mol, you can follow these steps:

Step 1: Identify the given information:
- Moles of ethane (n) = 0.2026 moles
- Molar mass of ethane (M) = 30.067 g/mol

Step 2: Use the formula to find the mass (m) of ethane:
m = n × M

Step 3: Plug in the given values and calculate the mass:
m = 0.2026 moles × 30.067 g/mol

Step 4: Solve the equation:
m ≈ 6.09 g

So, there are approximately 6.09 grams of ethane present in the sample.

To know more about ethane visit:

https://brainly.com/question/19128101

#SPJ11

consider the following reaction: na3po4(aq) alcl3(aq) → 3nacl(aq) alpo4(s) what is the net ionic equation?

Answers

2Al3+(aq) + 3PO43-(aq) → Al2(PO4)3(s) This equation shows only the species that are involved in the reaction, and it emphasizes the formation of solid aluminum phosphate.

The net ionic equation is a simplified version of the overall chemical reaction, showing only the species that undergo a change. In this case, the overall reaction involves the combination of sodium phosphate (Na3PO4) and aluminum chloride (AlCl3) to form sodium chloride (NaCl) and aluminum phosphate (AlPO4). The balanced chemical equation for this reaction is:
2Na3PO4(aq) + 3AlCl3(aq) → 6NaCl(aq) + Al2(PO4)3(s)
To write the net ionic equation, we need to identify the ions that undergo a change. In this case, the sodium and chloride ions remain as aqueous ions on both sides of the equation, so they do not undergo any change. The aluminum and phosphate ions, however, combine to form solid aluminum phosphate. Therefore, the net ionic equation is:
2Al3+(aq) + 3PO43-(aq) → Al2(PO4)3(s)
This equation shows only the species that are involved in the reaction, and it emphasizes the formation of solid aluminum phosphate.

To know more about Ionic equation visit:

https://brainly.com/question/29299745

#SPJ11

Substance A undergoes a first order reaction A → B with a half-life of 20 min at 25 °C. If the initial concentration of A in a sample is 1.6 M, what will be the concentration of A after 80 min? (A) 0.40 M(B) 0.20 M (C) 0.10 M (D) 0.050 M

Answers

The concentration of A after 80 minutes is 0.10 M, which corresponds to option (C).

The first-order reaction A → B with a half-life of 20 min means that after 20 minutes, half of the initial concentration of A will have been converted to B. After another 20 minutes, half of the remaining A will have converted to B, leaving only one-quarter of the initial concentration of A. This pattern continues, with each successive half-life reducing the concentration of A by half.

Therefore, after 80 minutes, or 4 half-lives, the concentration of A will have decreased to 1/16th of its initial concentration. To calculate this value, we can use the equation:

ln([A]t/[A]0) = -kt

Where [A]t is the concentration of A at time t, [A]0 is the initial concentration of A, k is the rate constant for the reaction, and t is the time elapsed.

Rearranging this equation, we get:

[A]t = [A]0 e (-kt)

We know that the half-life of the reaction is 20 minutes, so we can use this information to find the rate constant k:

ln(1/2) = -k(20 min)⁻¹

k = 0.03465 min

Now we can substitute these values into the equation to find the concentration of A after 80 minutes:

[A]80 = 1.6 M e x (-0.03465 min⁻¹ ₓ 80 min)

[A]80 = 0.10 M

Hence, C is the correct option.

You can learn more about first-order reactions at: brainly.com/question/1769080

#SPJ11

Suppose you have 1.00 L of an aqueous buffer containing 60.0 mmol benzoic acid (pKa = 4.20) and 40.0 mmol benzoate.
pH of buffer= 4.023
What volume of 4.50 M NaOH would be required to increase the pH to 4.93?

Answers

You would need to add 8.4 mL of 4.50 M NaOH to the buffer to increase the pH to 4.93.

To calculate the volume of 4.50 M NaOH required to increase the pH of the buffer from 4.023 to 4.93, we need to consider the Henderson-Hasselbalch equation and the pKa value of benzoic acid.

The Henderson-Hasselbalch equation is given by:

pH = pKa + log([A-]/[HA])

Given that the pH of the buffer is 4.023, we can rearrange the Henderson-Hasselbalch equation to solve for [A-]/[HA]:

[A-]/[HA] = 10^(pH - pKa)

Substituting the values:

[A-]/[HA] = 10^(4.023 - 4.20)

[A-]/[HA] = 10^(-0.177)

[A-]/[HA] = 0.628

This means that the ratio of benzoate ion ([A-]) to benzoic acid ([HA]) in the buffer is 0.628.

Now, we need to determine the moles of benzoic acid and benzoate ion in the 1.00 L of buffer:

moles of benzoic acid = 60.0 mmol = 0.060 mol

moles of benzoate ion = 40.0 mmol = 0.040 mol

Since the ratio of [A-] to [HA] is 0.628, we can calculate the moles of benzoate ion required to reach the desired pH of 4.93:

moles of benzoate ion required = 0.628 * moles of benzoic acid = 0.628 * 0.060 = 0.0377 mol

Now, we need to calculate the moles of NaOH required to react with the benzoate ion:

moles of NaOH required = moles of benzoate ion required = 0.0377 mol

Finally, we can calculate the volume of 4.50 M NaOH required using the equation:

volume = moles / concentration

volume = 0.0377 mol / 4.50 M

volume = 0.0084 L = 8.4 mL

Therefore, you would need to add 8.4 mL of 4.50 M NaOH to the buffer to increase the pH to 4.93.

To learn more about moles, refer below:

https://brainly.com/question/31597231

#SPJ11

Which of the following represents the molecular equation for the complete neutralization reaction of phosphoric acid (H3PO4) with aqueous potassium hydroxide (KOH)? O. H3PO4 (aq) + KOH(aq) → H20(l) + KH2PO4(aq) O. H3PO, (aq) + 3KOH(aq) + 3H2011) + K3PO4(aq) O. H3PO4 (aq) + KOH(aq) → KH(aq) + 2H2O(l) + P20 (9) O. H3PO, (aq) + 3KOH(aq) + 3H2011) + 3KPO(aq) O. H3PO,aq) + KOH(aq) → H3PO, (aq) + KH3PO4 (aq)

Answers

The correct molecular equation for the complete neutralization reaction of phosphoric acid (H3PO4) with aqueous potassium hydroxide (KOH) is: H3PO4 (aq) + 3KOH(aq) → 3H2O(l) + K3PO4(aq).

This reaction involves the acid-base neutralization between an acid (H3PO4) and a base (KOH), resulting in the formation of a salt (K3PO4) and water (H2O). The reaction equation must be balanced in terms of atoms and charges, which is achieved by using coefficients to ensure that there are equal numbers of each type of atom on both sides of the equation. This balanced equation indicates that three moles of KOH are required to react completely with one mole of H3PO4 to form three moles of water and one mole of K3PO4.

Overall, this is an important chemical reaction in various industrial and laboratory applications.

To know more about neutralization reaction visit:

https://brainly.com/question/27745033

#SPJ11

Calculate the ionic strength of a 0.0020 m aqueous solution of MgCl2 at 298 k.

Answers

The ionic strength of the 0.0020 M MgCl2 solution at 298 K is 0.0060 mol/L.

The ionic strength of a solution is a measure of the concentration of ions in the solution. It is calculated using the following formula:

I = 1/2 * ∑(Ci * zi^2)

where I is the ionic strength, Ci is the molar concentration of each ion in the solution, and zi is the charge of the ion.

For MgCl2, the compound dissociates into Mg2+ and 2 Cl- ions in solution. Therefore, the concentration of Mg2+ and Cl- in the solution are both 0.0020 mol/L.

Using the formula above, we can calculate the ionic strength of the solution:

I = 1/2 * [(0.0020 mol/L * 2^2) + (0.0020 mol/L * (-1)^2 * 2)]

I = 1/2 * (0.0080 + 0.0040)

I = 0.0060 mol/L

Therefore, the ionic strength of the 0.0020 M MgCl2 solution at 298 K is 0.0060 mol/L.

To know more about strength refer here

https://brainly.com/question/13848366#

#SPJ11

calculate the pka values for the following acids. a) methanol (ka = 2.9 x 10-16) b) lactic acid (ka = 8.3 x 10-4)

Answers

(a) pKa of methanol is 15.2. (b) pKa of lactic acid is 3.08.


The pKa value is a measure of the acidity of an acid and is defined as the negative logarithm of the acid dissociation constant (Ka). For methanol, the Ka value is 2.9 x 10-16, which means the pKa value is 15.2.

This indicates that methanol is a very weak acid, which does not readily donate protons. Lactic acid, on the other hand, has a Ka value of 8.3 x 10-4, which means the pKa value is 3.08.

This indicates that lactic acid is a moderately strong acid, which can readily donate protons in aqueous solution. The pKa values of acids play a critical role in their reactivity and behavior in chemical reactions.

For more such questions on lactic acid , click on:

https://brainly.com/question/14279880

#SPJ11

a) The pKa of methanol can be calculated using the formula pKa = -log(Ka). Substituting the given Ka value for methanol into this formula, we get:

pKa = -log(2.9 x 10^-16) ≈ 15.5

b) The pKa of lactic acid can also be calculated using the same formula:

pKa = -log(8.3 x 10^-4) ≈ 3.1

pKa is a measure of the acidity of a substance, specifically the acidity of its conjugate acid. It represents the negative logarithm of the acid dissociation constant (Ka) of the substance. A lower pKa value indicates a stronger acid, while a higher pKa value indicates a weaker acid. Using the formula pKa = -log(Ka), we can calculate the pKa values for acids when the Ka value is known. In the case of methanol and lactic acid, the given Ka values were substituted into the formula to obtain their respective pKa values. Methanol has a very high pKa value of approximately 15.5, indicating that it is a very weak acid. Lactic acid, on the other hand, has a much lower pKa value of approximately 3.1, indicating that it is a moderately strong acid.

learn more about methanol here:

https://brainly.com/question/24077457

#SPJ11

calculate the solubility of naphthalene at 25 egree c in any solvent in which it forms an ideal solution. The melting point of naphthalene is 80'C, and the enthalphy of fusion is 19.29 kJ/mol. The measured solubility of napthalene in benzene is x1=0.296

Answers

The solubility of naphthalene at 25°C in an ideal solution can be calculated using Raoult's law:

S = x1 * Psat

where S is the solubility of naphthalene, x1 is the mole fraction of naphthalene in the solution, and Psat is the vapor pressure of pure naphthalene at 25°C.

Since naphthalene is a solid at 25°C, its vapor pressure is negligible, and we can assume Psat = 0. Therefore, the solubility of naphthalene in an ideal solution at 25°C is zero.

However, if we consider the melting point and enthalpy of fusion of naphthalene, we can estimate its solubility in a solvent such as benzene, in which it forms an ideal solution. The enthalpy of fusion indicates the energy required to melt one mole of naphthalene, and the melting point is the temperature at which this occurs.

If we assume that the solubility of naphthalene in benzene is also governed by Raoult's law, we can write:

ΔHfus / R * (1/Tm - 1/T) = ln(x1 / (1-x1))

where ΔHfus is the enthalpy of fusion, R is the gas constant, Tm is the melting point of naphthalene (353 K), T is the temperature at which we want to calculate the solubility, and x1 is the experimentally measured mole fraction of naphthalene in benzene (0.296).

Solving for x1 at 25°C (298 K), we get:

x1 = exp(-ΔHfus / R * (1/Tm - 1/T))

x1 = exp(-19.29 * 10^3 / (8.314 * 353) * (1/353 - 1/298))

x1 = 0.023

Therefore, the estimated solubility of naphthalene in benzene at 25°C is 0.023, assuming that naphthalene forms an ideal solution in benzene and that its solubility is governed by Raoult's law.

Learn more about Raoult's here:

https://brainly.com/question/28304759

#SPJ11

Other Questions
A 1.575 GHz GPS signal from a satellite is a RHCP polarized wave. It thus has equal power densities in the TM and TE polarizations (and the two corresponding electric field components are also 90 out of phase from each other, though this is not important for the present problem). The signal is incident at an angle of 45 on ocean water, which is nonmagnetic, with a relative permittivity of & = 81 and a conductivity of o=4 [S/m]. What percentage of the power that is reflected from the surface of the ocean? Do you think the reflected wave will be circularly polarized? You do not have to do any calculations, but justify your answer. (You may assume that the incident power density of the RHCP wave is 1 [W/m] if you wish, but the final answer will not depend on the power density of the incident wave.) Bob is walking down the sidewalk and sees that there is a stick in the path. He slows down, steps over the stick and is able to keep walking. What did Bob practice to avoid falling?a. Balanceb. Reactive Postural Controlc. Agilityd. Anticipatory Postural Control The profit from a put bear spread strategy when both options are out of the money is a. -X1 + ST + P1 + X2 - ST - P2 b. -X1 + ST + P1 - P2 c. X1 - ST-P1 - X2 + ST + P2 d. P1 + x2 - ST-P2 e. P1 P2 The distance between adjacent orbit radii in a hydrogen atom:A) increases with increasing values of nB) decreases with increasing values of nC) remains constant for all values of nD) varies randomly with increasing values of n The cost (in thousand of dollars) of the production of scooters can be represented by x^(2)-10x+27, where x is the number of scooters produced. What is the minimum number of scooters that can be produced for 6 thousand? Prove the following local stability criterion for Helmholtz and Gibbs Free Energy (a) 0F DV2 /T.N (c) G 0> aT2 /P.N (d) aG 0P2 T 0> find the power series for ()=243(14)2 in the form =1[infinity]. Describe a Turing machine which decides the language {0 i 0 j = 0ij} explain how you would go about creating a genetically engineered goat that expresses human growth hormone in its milk? Select the procedure that can be used to show the converse of the pythagorean theorem using side lengths chosen from 5cm, 9cm, 12cm, and 15cm. A. Knowing that 5^2 + 9^2 < 12^2, draw the 5 cm side and the 9 cm side with a right angle between them. The 12 cm side will fit to form a right triangle. B. Knowing that 9^2 + 12^2 mot equal 15^2, draw the 5 cm side and the 9 cm side with a right angle between them. The 15 cm side will fit to form a right triangle. C. Knowing that 9^2 + 12^2 = 15^2 , draw any two of the sides with a right angle between them. The third side will fit to form a right triangle. D. Knowing that 9^2 + 12^2 = 15^2, draw the 9 cm side and the 12 cm side with a right angle between them. The 15 cm side will fit to form a right angle Determine the torque about the origin. Counterclockwise is positive.(include units with answer)y (4.8,4.4)m(2.7,2.3)m All of the following are methods of controlling receivables except Multiple Choice a. offering a cash discount b. using DBIS c. reducing cash sales d. reducing net terms 2.) concentrated hcl is 36.0 y mass hcl and has a density of 1.18 g/ml. calculate the molality and molarity of concentrated hcl. diazonium ions are often synthesized at low temperatures, why? they can form a red dye if warmed they can melt they decompose at high temperatures they evaporate very easily they react very quickly 2: Whyare the paintings of David Olere considered primarysources? The temperature one cold evening at8:00pm was 0c. Between then and midnight ,the temperature dropped 3c each hour. What was the temperature at midnight What is most significant about eating gallo pinto to estelle's family? levitt's vision of global markets may still be a long way off because of national differences in using your experimental data, what does it suggest about the stability of compound 4 to acid hydrolysis? Rate of Return If State OccursState ofProbability ofEconomyState of EconomyStock AStock BRecession.17.05.21Normal.62.09.08Boom.21.16.25Calculate the expected return for each stock. (Do not round intermediate calculations. Enter your answers as a percent rounded to 2 decimal places, e.g., 32.16.)Expected returnStock A%Stock B%Calculate the standard deviation for each stock. (Do not round intermediate calculations. Enter your answers as a percent rounded to 2 decimal places, e.g., 32.16.)Standard deviationStock A%Stock B%Expert Answer