Answer:
Neither.
Explanation:
After 10 seconds the object will have travelled 490.5m, not 98.1. The vertical distance covered in freefall by an object in time t is given by Distance= 1/2 x 9.81 x t^2. Simply multiplying 9.81 by the time will NOT give the distance covered.
The acceleration of the object will not change, it will always be 9.81 m/s^2. Its speed will keep increasing by 9.81 m/s every second, thats what the ‘per second squared*’ means. The speed after 10 seconds will be 98.1 m/s
To summarise, after 10 seconds, the object will have covered 490.5 metres, and it will have a final speed of 98.1 m/s. It’s acceleration will remain 9.81 m/s^2 at all times
A length of organ pipe is closed at one end. If the speed of sound is 344 m/s, what length of pipe is needed to obtain a fundamental frequency of 63 hz?.
Answer:
Node-Antinode for a pipe closed at one end (fundamental)
The length of such a pipe would be wavelength / 4
lambda (wavelength) = speed / frequency = 344 m/s / 63 / sec = 5.46 m
The pipe would have to be 5.46 / 4 = 1.36 m
how did u figure this out
Answer:
huh? figure wht out??
Explanation:
have a great day!
Answer:
What's the meaning of the phrase 'figure it out'?
figure out 1 To discover or decide something: Let's figure out a way to help. We figured out when to hold the next meeting. 2 To solve or decipher something: Can you figure this puzzle out? Late into the night, I figured out my homework
Explanation:
Each box weighs 10lb. The coefficient of static friction between box A and box B is 0.24, and the coefficient of static friction between box B and the inclined surface is 0.3. What is the largest angle for which box B will not slip
The largest angle for which box B will not slip is 16.7⁰.
The given parameters:
weight of box, W = 10 lbcoefficient of static friction between box A and box B, [tex]\mu_s_1[/tex] = 0.24coefficient of static friction between box B and the inclined surface, [tex]\mu_s_2[/tex] = 0.3The frictional force between box A and box B is calculated as;
[tex]F_f_1= \mu_s_1 (mg)[/tex]
The frictional force between box B and inclined surface is calculated as;
[tex]F_f = \mu_s_2 (2mg) cos(\theta)[/tex]
The net force on the boxes that results in no movement is calculated as;
[tex](2mg) sin(\theta) - F_f= 0\\\\(2mg) sin(\theta) = F_f\\\\(2mg) sin(\theta) = \ \mu_s_2 (2mg) cos(\theta)\\\\ sin(\theta) = \mu_s_2 cos(\theta)\\\\\mu_s_2 = \frac{sin(\theta)}{cos(\theta)} \\\\\mu_s_2 = tan(\theta)\\\\\theta = tan^{-1} (\mu_s_2)\\\\\theta = tan^{-1} (0.3)\\\\\theta = 16.7 \ ^ 0[/tex]
Thus, the largest angle for which box B will not slip is 16.7⁰.
Learn more about coefficient of static friction here: https://brainly.com/question/25050131
No links plz!!
Why can't we observe the image of a distant object in a concave mirror, but we can observe in a convex mirror? Both images are diminished.
Answer:
Light
Explanation:
The way a concave mirror works is that since it's concave, the light bounces off of each other. a convex mirror, it curved the opposite, and the mirror has no way to bounce off of itself.
What happens if you drop a chicken wing from the top of the Eiffel Tower
Answer:
I think it will brake or squashed
A particular roller coaster has a mass of 3500 kg, a height of 4.0, and a velocity of 12m/s. What is the potential energy? If needed, use g=10.m/s^2
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Gravitational Potential Energy of an object is calculated by formula ~
[tex] \large\boxed{\sf P = mgh}[/tex]
where,
m = mass of the object = 3500 kgg = Acceleration due to gravity = 12 m/s²h = height attained by the object = 4 mNow, let's calculate its potential energy ~
[tex]3500 \times 10 \times 4[/tex][tex]140000 \: \: joules[/tex][tex]140 \: \: kj[/tex]Answer:
Potential Energy of an object is calculated by formula:
Potential Energy (P.E)=m×g×hWhere,
m=mass of bodyg=acceleration due to gravityh=height from the earth surfaceNow, let's solve the question.
Given,
mass(m)=3500 kgheight (h)=4mvelocity (v)=10m/s²Now,
We know that,
Potential Energy (P.E)=mgh
[tex] = 3500 \times 10 \times 4[/tex]
[tex] = 3500 0\times 4[/tex]
[tex] =140000 joules [/tex]
[tex]\mathfrak{\blue{DisneyPrincess29}}[/tex]
Please help! Question is attached!
Answer:
1. -6m/s
2. 0m/s
3. 3m/s
4.14.38N
5. 25.9 J
Explanation:
1. point A and C same height means velocity will be the same just in opposite direction, = -6m/s
2. at max height vertical velocity is 0
3. same as point A
4. Weight is mg = 1.438*10 = 14.38N
5. total energy is KE+PE, which never changes
so TE = 32.4 and KE =6.5J then PE = 32.4-6.5 = 25.9 J
What is Kepler’s first law?
Answer:
Kepler's First Law: each planet's orbit about the Sun is an ellipse. The Sun's center is always located at one focus of the orbital ellipse. The Sun is at one focus. The planet follows the ellipse in its orbit, meaning that the planet to Sun distance is constantly changing as the planet goes around its orbit.
Answer:
Explanation:
Kepler 's first law - sometimes referred to as the law of ellipses - explains that planets are orbiting the sun in a path described as an ellipse. An ellipse can easily be constructed using a pencil, two tacks, a string, a sheet of paper and a piece of cardboard. Tack the sheet of paper to the cardboard using the two tacks.
A 5.77 kg object is tied to the end of a cord and whirled in a horizontal circle of radius 355 cm. The object completes 4.4 revolutions every 6.94E-3 hours. What is the centripetal force exerted on the object?
The centripetal force exerted on the object is 25.24 N.
The given parameters:
mass of the object, m = 5.77 kgradius of the circle, r = 355 cm = 3.55 mnumber of revolutions, N = 4.4 rev for 6.9 x 10⁻³ hoursThe angular speed of the object is calculated as follows;
[tex]\omega = \frac{4.4 \ rev}{6.9 \times 10^{-3} \ h} \times \frac{1 \ h}{3600 \ s} \times \frac{2 \ \pi \ rad}{1 \ rev} = 1.11 \ rad/s[/tex]
The centripetal force exerted on the object is calculated as follows;
[tex]F =m \omega ^2 r\\\\F = 5.77 \times (1.11)^2 \times 3.55\\\\F = 25.24 \ N[/tex]
Thus, the centripetal force exerted on the object is 25.24 N.
Learn more about centripetal force here: https://brainly.com/question/20905151
The horizontal movement of air from an area of high pressure to an area of lower pressure
options:
wind
weather
heat
conduction
Answer:
Explanation:
A wind is the horizontal movement of air from an area of high pressure to an area of lower pressure. Winds are caused by differences in air pressure. Most differences in air pressure are caused by unequal heating of the atmosphere
1
A pencil weighing 1N is sitting on a desk.
Write down all the forces on the desk.
a.
b.
Draw a free body diagram of the desk.
c.
Add up the forces in the x-direction (horizontal) and the y-direction (vertical)
The force diagram on the desk consists of normal reaction and weight of the pencil.
The net force on the desk in vertical direction is 1 N.
The net force on the desk in horizontal direction is 0.
The given parameters;
weight of the pencil, W = 1 NThe force diagram of the desk is sketched as follows;
↑ N
⊕
↓ W
Where;
N is the normal reaction on the deskW is the weight of the ballThe net force on the desk in vertical direction = 1 N
The net force on the desk in horizontal direction = 0
Learn more here:https://brainly.com/question/3624253
jxjxjfjfjfknfnfnnfmfgmmmmmmmm(xmpqitexsy.)
Answer:
Hi! can you give me BRAINLIEST ANSWER please.
I would appreciate it
Football players boots have spikes at their sole
Give reason
Answer:
it prevents slipping on the grass while playing
Answer:
to keep their grip on the ground so they won't fall
If an object is rolling without slipping, how is the speed of its center related to its angular velocity
Speed of its center will be directly proportional to its angular velocity in the case of rolling without slipping
What is rolling without slipping ?
Rolling without slipping is a combination of translation and rotation where the point contact is instantaneously at rest.
When an object rolls without slipping on an inclined plane , then the velocity of the center of mass will be equal to angular velocity times radius that object.
Vo = angular velocity * radius
Learn more about rolling without slipping
https://brainly.com/question/17328374?referrer=searchResults
#SPJ2
1. Explain why the energy of photoelectrons in XPS depends on energy of x-ray source, while energy of Auger electrons does not.
Answer:
Only part of the incident energy from an X-ray source may be used by the ejected electron (some of the energy can be used by the exiting photo electron and some of the energy by the exiting photon).
Auger electrons depend on the energy difference between energy levels of an atom and are fixed - so the ejected electron will have a fixed energy depending on the difference of energy levels of the atom. The Auger effect is called a "radiationless" transition because no radiation is detected outside of the atom.
Explain and give an example of inertia
Answer:
Inertia regards objects staying in rest or in motion unless an outside force alters this. An example would be kicking a soccer ball. It was originally still (not moving) on the turf, until your kick altered this and set it into motion. Similarly, the friction of the turf will alter this state of motion by eventually bring the ball to a complete stop.
boom :)
hope this helps!
helppppp T^T
......
plsssss
How do atoms join together?
Answer:
Atoms can be joined together by chemical bonds.
Explanation:
When atoms form bonds, they can achieve a stable electron arrangement. To achieve a stable electron arrangement atoms can lose, gain or share electrons. There are many different types of bonds that hold atoms together.
Answer:
Atoms come together to form molecules because of their electrons. Electrons can join (or bond) atoms together in two main ways. When two atoms share electrons between them, they are locked together (bonded) by that sharing. These are called covalent bonds.
Explanation:
How are typhoons formed?
Need help!
Answer:
typhoon forms when winds blow into areas of the ocean where the water is warm. These winds collect moisture and rise, while colder air moves in below. This creates pressure, which causes the winds to move very quickly. The winds rotate, or spin, around a center called an eye.
Around the time that _______ burning finishes, the inert core of ________ in very massive stars will collapse and the star will explode as a supernova.
The Sun can explode in a supernova. Around the time that sun (massive star) burning finishes, the inert core of Iron in very massive stars will collapse and the star will explode as a supernova.
When the sun explode, their inert iron cores often collapse into an extremely dense neutron star.
In a massive star, hydrogen fusion in the core is accompanied by other different fusion reactions involving heavier elements.
When the core of a massive star dies during a supernova, The supergiant will explodes as a supernova.
Learn more from
https://brainly.com/question/18179049
At about 1 second after the beginning of the universe, one type of particle was able to start traveling freely through the universe. These particles are still with us, but they are extremely hard to detect. They are called:
The Big Bang theory allows finding the result for which particles were formed in the 1 s of the universe is:
The quark subatomic particles were the first to form due to the high amount of energy.
The Big Bang theory says that the universe is formed about 14 billion years ago, of a structure that is very high energy.
Einstein's equation establishes the relationship between energy and matter, establishing that energy can be converted into matter.
E = m c²
Where E is energy, m is mass, and c is the speed of light.
In the 1 s of the universe the energy density was so high that all subatomic particles were formed, the first being quarks.
When the universe cooled enough, the quarks combined to form protons and neutrons, from which atoms were formed.
In conclusion, using the Big Bang theory we can find the result for which particles were formed in the 1 s of the universe is:
The quark subatomic particles were the first to form due to the high amount of energy.
Learn more about the Big Bang here: brainly.com/question/3333508
Numerical
What mass must be suspended from a steel wire 2m long and 1mm diameter to stretch it by 1mm
By young’s theory
Answer:
Thus, 4 kg mass must be suspended from a steel wire 2 m long and 1 mm diameter to stretch it by 1 mm.
Explanation:
HEEEEEELLLLLLLLPPPPPPPP!!!!!!!!!!
Answer:
True
True
False (Temperature measures the average kinetic energy of the particles in a substance. Thermal energy measures the total kinetic energy of the particles in a substance.)
False (is true only if both object have the same mass)
False (it's 100°)
True
True
True
True
False (Substances with a high specific heat require a lot of heat to have their temperature raised by one degree. On the other hand, substances with a low specific heat require a smaller amount of heat, like most metals)
When we use an analogy that represents the expanding universe with the surface of an expanding balloon, what does the inside of the balloon represent?
Answer: When we use an analogy that represents the expanding universe with the surface of an expanding balloon, what does the inside of the balloon represent? The inside of the balloon does not represent any part of our universe.
What are the two factors that affect the gravitational pull between two objects?
Answer:
hen dealing with the force of gravity between two objects, there are only two things that are important – mass, and distance.
Explanation:
Some houses are built with very thick walls. Explain how these walls help to keep the houses
warm in the winter.
Thicker walls provide more materal for .......
to travel through from the inside to outside, so the
is less, keeping the houses warmer.
(2 marks)
Answer: It banks night-time cool to bring temperatures down in the day, and warms up over the course of the day and then releases the warmth at night. Thick walls or exposed solid floors can provide thermal mass. The shape of buildings matters too, and the orientation around each other so that the wind moves in particular ways. Hope this helps, tell me if I need to add anything. :))
When did the objects that we now see as asteroids and comets form in the solar system?.
Answer:
After solid particles condensed from the gas but before the planets finished forming
How do air particles move above a candle flame
If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand
Explanation:
Hydrostatic pressure, P = hdg where d is density if the liquid ( water)
P= 150m × 1000kgm-3 × 10ms-2
P= 1.5 ×10^6 Pa
Hello everyone, I just want to know the formula to solve this problem:
What is the speed of sound at 62°C?
and how to solve this kind of problem? My brain isn't working.. :)
Answer:
367 m/sExplanation:
Use simplified formula:
[tex]v=331.3\sqrt{1+T/273.15}[/tex] , where T- temperature in Celsius