The HCN molecule has 3 translational, 2 rotational, and 4 vibrational degrees of freedom.
For the HCN molecule, we need to determine the translational, rotational, and vibrational degrees of freedom.
1. Translational Degrees of Freedom:
For any molecule, there are always 3 translational degrees of freedom. This is because molecules can move in the x, y, and z directions.
2. Rotational Degrees of Freedom:
HCN is a linear molecule. Linear molecules have 2 rotational degrees of freedom, as they can rotate about the two axes perpendicular to the molecular axis (in this case, the y and z axes).
3. Vibrational Degrees of Freedom:
The vibrational degrees of freedom can be calculated using the formula:
vibrational degrees of freedom = 3N - 6 for non-linear molecules and 3N - 5 for linear molecules, where N is the number of atoms in the molecule.
For HCN, which is a linear molecule with 3 atoms, the vibrational degrees of freedom are:
vibrational degrees of freedom = 3(3) - 5 = 9 - 5 = 4
In summary, the HCN molecule has 3 translational, 2 rotational, and 4 vibrational degrees of freedom.
For more questions on HCN molecule:
https://brainly.com/question/1687160
#SPJ11
The HCN molecule has 6 degrees of freedom: 3 translational, 2 rotational, and 1 vibrational. Its linear structure means it only has 1 vibrational degree of freedom.
There are a total of 6 degrees of freedom in the HCN (hydrogen cyanide) molecule: 3 translational, 2 rotational, and 1 vibrational. While rotational degrees of freedom refer to the molecule's ability to rotate around two axes perpendicular to the molecular axis, translational degrees of freedom describe the molecule's ability to move in space along three axes. The stretching and bending of the chemical bonds inside the molecule are referred to as the vibrational degree of freedom. Because of its linear structure, the HCN molecule only has one vibrational degree of freedom, which means that there is only one manner in which the atoms can vibrate in relation to one another.
learn mnore about HCN molecule here:
https://brainly.com/question/13838935
#SPJ11
According to the 2010 u.s. census, ______ percent of women had college degrees compared to approximately _____ percent of men.
According to the 2010 U.S. Census, 37 percent of women had college degrees compared to approximately 35 percent of men.
In 1970 and early 1980, women have surpassed men in number of bachelor's degree or master's degree in united state.
The women gets more degree to gain financial benefits. The gap in earning is greater in female graduate and non- graduate as compare to male graduate and non-graduate. To give education to girls saves lives and builds stronger families, communication and economic too.
learn about financial and benefits
https://brainly.com/question/19993778
#SPJ4
Need this answered ASAP
The concentration of the final solution will be 0.2886 M.
Molar concentration50.6 g of NaCl is dissolved in 600 mL of water.
Mole of 50.6 g NaCl = 50.6/58.44 = 0.8658 mol
Molar concentration of the oiriginal solution = 0.8658/06 = 1.4431 M
25 mL of 1.4431 M of the solution is diluted up to the 125 mL mark.
m1 = 1.4431, v1 = 25 ml, v2 = 125 mL
m2 = m1v1/v2 = 1.4431 x 25/125 = 0.2886 M
The concentration of the final solution will be 0.2886 M
More on molar concentration can be found here: https://brainly.com/question/15532279
#SPJ1
Based on the melting points of both substances in comparison with the table what's your guess
Based on the melting points of both substances in comparison, my guess is Sodium chloride and glucose are the mystery compounds.This is further explained below.
What is Sodium chloride?Generally, Salt's chemical name is sodium chloride. It is an electrolyte's job to keep your body's fluid balance in check.
In conclusion, Sodium chloride and glucose are the likely candidates based on their relative melting points.
Read more about Sodium chloride
https://brainly.in/question/6246233
#SPJ1
A sample of 0.400 moles of nitrogen occupies 0.800 L. Under the same conditions, what number of moles occupies 1.200 L
Taking into account the Avogadro's Law, 0.600 moles occupies 1.200 L.
Avogadro's LawAvogadro's Law is a gas law that relates the volume and amount of gas at constant pressure and temperature.
Avogadro's law states that volume is directly proportional to the amount of gas: increasing the amount of gas will increase the volume, while decreasing the amount of gas will decrease the volume.
Mathematically, this law states that the ratio between the volume and the amount of gas is constant:
[tex]\frac{V}{n} =k[/tex]
Assuming that there is a certain amount of gas n1 that occupies a volume V1 at the beginning of the experiment, by varying the amount of gas to a new value n2, then the volume will change to V2, and the following is true:
[tex]\frac{V1}{n1} =\frac{V2}{n2}[/tex]
Amount of moles in this caseIn this case, you know:
V1=0.800 Ln1= 0.400 molesV2= 1.200 Ln2= ?Replacing in Avogadro's Law:
[tex]\frac{0.800 L}{0.400 moles} =\frac{1.200 L}{n2}[/tex]
Solving:
[tex]n2x\frac{0.800 L}{0.400 moles} =1.200 L[/tex]
[tex]n2=\frac{1.200 L}{\frac{0.800 L}{0.400 moles} }[/tex]
n2= 0.600 moles
Finally, 0.600 moles occupies 1.200 L.
Learn more about Avogadro's Law:
brainly.com/question/4147359
#SPJ1
The first word in the name of an ester is derived from the ________ used in the esterification.
The first word in the name of an ester is derived from the alcohol used in the esterification.
What is esterification?Esterification is a chemical process where an organic acid with the formula is combined with an alcohol molecule having the chemical formula (ROH).
The process of esterification is known to produce an ester molecule and during this phenomenon is released water (H2O).
An example of an esterification reaction occurs when ethanoic acid (i.e., the active ingredient of vinegar) can react with C2H5OH (i.e., ethanol) in order to form the ethyl ethanoate molecule, which is a well-known ester molecule.
In conclusion, the first word in the name of an ester is derived from the Alcohol used in the esterification.
Learn more about esterification here:
https://brainly.com/question/14028062
#SPJ1
The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the _____, whereas a large value of K indicates that the _____ will be present in a higher proportion.
The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the reactants, whereas a large value of K indicates that the products will be present in a higher proportion.
What is Equilibrium Constant ?The equilibrium constant of a chemical reaction usually denoted by the symbol K that express the relationship between the amount of reactants and products when a chemical reaction reaches equilibrium.
It is expressed as:
[tex]K_{c} = \frac{[C]^{c} \times [D]^{d} \times ...}{[A]^{a} \times [B]^{b} \times ...}[/tex]
where,
K = Equilibrium constant
A, B = Products
C, D = Reactants
[A] = equilibrium concentration of A in moles
a = number of moles of A
Thus from the above conclusion we can say that The value of the equilibrium constant K is a measure of how far the reaction proceeds toward the products at a given temperature. A small value of K indicates that the reaction favors the reactants, whereas a large value of K indicates that the products will be present in a higher proportion.
Learn more about the Equilibrium Constant here: https://brainly.com/question/12858312
#SPJ4
Which molecule will undergo only london dispersion forces when interacting with other molecules of the same kind?.
Molecules undergo London dispersion forces:
[tex]C_{4}H_{10}[/tex] is the molecule will undergo only London dispersion forces when interacting with other molecules of the same kind.
What are London dispersion forces?
A sort of force that interacts between atoms and molecules that is often electrically symmetric is referred to as a London dispersion force.When viewed from the nucleus, their electron distribution is frequently symmetrical. This dispersion force, which is also known as a transient attractive force, is frequently observed when the locations of the electrons in two nearby atoms cause the atoms to temporarily form dipoles.The bond is polar when there are significant variations between the elements' electronegativities; it is nonpolar when there are similarities. When the molecule's dipole moment is equal to O, it is nonpolar; when it differs from O, it is polar.The force at these molecules is known as the London dispersion force. In nonpolar molecules, the forces are weak, and partial charges must be induced so that they can bond. In polar molecules, partial charges caused by polarity result in a stronger link known as a dipole-dipole. The dipole-dipole is significantly stronger and known as a hydrogen bond if it is connected to a large electronegative atom (F, O, or N). Ionic force is the name for the attraction force at ionic substances.The intermolecular force in the letter an is the London dispersion force because the compound is nonpolar;Reason for incorrect options:
b: the compound is ionic because Na is a metal and the other part is covalent,
c: two compounds are possible: one is nonpolar and exhibits London dispersion force; the other is polar and exhibits dipole-dipole force; and
d: both compounds exhibit hydrogen bonds (H bonded to O, and H bonded to F).
NOTE: Your question is incomplete, but most probably your full question was, which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind? Which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind?
A. [tex]C_{4}H_{10}[/tex]
B. [tex]NaC_{2}H_{3}O_{2}[/tex]
C. [tex]CH_{2}C_{12}[/tex]
D. [tex]C_{2}H_{5}OH HF[/tex]
Learn more about the London dispersion forces here,
https://brainly.com/question/22388709
#SPJ4
a plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. what is its water potential? show your work if it is placed in a solution with a water potential of -1.0 what will happen to this plant cell
A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.
What is Water Potential ?Water Potential is the potential energy of water in a system per unit volume relative to pure water , when both pressure and temperature are kept same. Water potential is never positive. It is expressed in kPa (Kilopascals). The symbol of water potential is ψ.
How to find the Water Potential ?To find the water potential use this formula
[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]
where,
ψ = Water Potential
[tex]\Psi_{s}[/tex] = Solute Potential
[tex]\Psi_{p}[/tex] = Pressure potential
Now put the value in above expression we get
[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]
= -2.0 + 0.0
= - 2 bar
Thus from the above conclusion we can say that A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.
Learn more about the Water Potential here: https://brainly.com/question/23855783
#SPJ1
If 5. 0 grams of kcl is dissolved in 500 ml of water, what is the concentration of the resulting solution?
If 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.
How to calculate concentration?The concentration of a solution can be calculated by using the following formula;
Molarity = no of moles ÷ volume
According to this question, 5.0 grams of KCl is dissolved in 500 ml of water. The concentration is calculated as follows:
no of moles of KCl = 5g ÷ 74.5g/mol = 0.067mol
Molarity = 0.067mol ÷ 0.5L = 0.134M
Therefore, if 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.
Learn more about concentration at: https://brainly.com/question/10725862
#SPJ1
Water is the ______ in aqueous solutions because it can dissolve polar molecules.
Answer:
solvent
Explanation:
Water dissolves the substances, which become the solutes in the solution.
The molecule CH₂O contains two single bonds and one double bond. True or false
Answer:
The answer to your question is True
Explanation:
CH2O is a polar molecule. It has three polar bonds that are arranged asymmetrically, thus allowing their dipole moments to add up and give the molecule an overall dipole moment. CH2O has a central carbon atom that forms two single bonds with the two hydrogen atoms and a double bond with the oxygen atom.
I hope this helps and have a good day!
How many molecules of H₂O are
equivalent to 97.2 g H₂O?
(H = 1.008 g/mol, O = 16.00 g/mol)
[?]
[?]x10 molecules
Enter your answer with the correct number of
significant figures and be sure the prefix is a number
between 1 and 10!
dro's Number = 6.02 x 1023 molecules/mole
Answer:
3.25 x 10²⁴ molecules H₂O
Explanation:
To find the number of H₂O molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the amount of sig figs in the given value.
Atomic Mass (H): 1.008 g/mol
Atomic Mass (O): 16.00 g/mol
Molar Mass (H₂O): 2(1.008 g/mol) + 16.00 g/mol
Molar Mass (H₂O): 18.016 g/mol
Avogadro's Number:
6.02 x 10²³ molecules = 1 mole
97.2 g H₂O 1 mole 6.02 x 10²³ molecules
------------------ x ------------------- x ------------------------------------ =
18.016 g 1 mole
= 3.25 x 10²⁴ molecules H₂O
One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. What will prevent you from coming into contact with this hazard
One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.
What is Aluminum Chloride ?Aluminum chloride is also called Aluminum trichloride. The formula of Aluminum chloride is AlCl₃. Aluminum chloride is a poor conductor of electricity in molten state. It is a powerful Lewis acid. It has very low melting point and boiling point.
What will prevent you from coming into contact with this hazard ?To prevent from this hazard follows these rules:
Wear safety glassesWear Impervious gloves Avoid contact with water or moisture. Avoid dust formationThus from the above conclusion we can say that One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.
Learn more about the Aluminum Chloride here: https://brainly.com/question/6061451
#SPJ4
A saturated solution of baso4 has a concentration of 0.5mol/l. a 55ml sample is taken by you. what is the mass of baso4 in the solution
Answer:
6.4 g BaSO₄
Explanation:
You have been given the molarity and the volume of the solution. To find the mass of the solution, you need to (1) find the moles BaSO₄ (via the molarity ratio) and then (2) convert moles BaSO₄ to grams BaSO₄ (via the molar mass). It is important to arrange the conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 2 sig figs to reflect the sig figs of the given values.
Molarity (mol/L) = moles / volume (L)
(Step 1)
55 mL / 1,000 = 0.055 L
Molarity = moles / volume <----- Molarity ratio
0.5 (mol/L) = moles / 0.055 L <----- Insert values
0.0275 = moles <----- Multiply both sides by 0.055
(Step 2)
Molar Mass (BaSO₄): 137.33 g/mol + 32.065 g/mol + 4(15.998 g/mol)
Molar Mass (BaSO₄): 233.387 g/mol
0.0275 moles BaSO₄ 233.387 g
--------------------------------- x ------------------- = 6.4 g BaSO₄
1 mole
Which of the following results in an increase in the entropy? (4 points)
Freezing water
Cooling a solid
Condensing water vapor
Dissolving sugar in water
Dissolving sugar in water results in an increase in the entropy.
Hence, Option (D) is correct answer.
What is Entropy ?Measurement of randomness of a system is called entropy. It is an extensive property. It is a state function. Unit of entropy is JK⁻¹ mol⁻¹.
Now lets check all options one by one
Option (A): Freezing water
Freezing water decreases the entropy because here second law of thermodynamics does not violate.
So it is incorrect option
Option (B): Cooling water
Cooling water does not increases entropy because entropy increases when solid melts to give liquid.
So it is incorrect option
Option (C): Condensing water vapour
In Condensing water vapour the temperature of liquid phase decreases and thus kinetic energy decreases. The randomness will decrease and hence entropy will also decrease.
So it is incorrect option.
Option (D): Dissolving sugar in solute
In dissolving sugar in solute the solid dissociates to ions and the randomness will increase and hence entropy will also increase.
So it is correct option
Thus from the above conclusion we can say that Dissolving sugar in water results in an increase in the entropy.
Hence, Option (D) is correct answer.
Learn more about the Entropy here: https://brainly.com/question/1477087
#SPJ1
What is the molality of a solution prepared by dissolving 2.00 ml of bromine (d = 3.105 g/ml) in 125 ml of acetic acid, hc2h3o2 (d = 1.05 g/ml) (ans. 0.30 m)?
The molality of a solution is 0.304g
Calculation,
Given data,
Volume of bromine = 2 mldensity of bromine = 3.105 g/ml Volume of acetic acid = 125 mldensity of of acetic acid = 1.05 g/mlDensity of bromine = 3.105 g/ml = mass / volume = mass / 2 ml
Mass of bromine = 3.105 g/ml × 2 ml = 6.206 g
Density of acetic acid = 1.05 g/ml = mass / volume = mass / 125 ml
Mass of bromine = 1.05 g/ml × 125 ml = 127.5 g
Molality = mass of solute in gram/molar mass of solute × 1000/mass of solvent in gram
Molality = 6.206 g/159.88 g/mol × 1000/127.5 g = 0.304 g
learn about Molality
https://brainly.com/question/20366625
#SPJ4
Vapor pressure of a liquid increases with increasing temperature because increasing the temperature _______________.
Vapor pressure of a liquid increases with increasing temperature because increasing the temperature results in increasing kinetic energy and increase in molecular transition and motion.
What is Vapor Pressure?
The pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a specific temperature in a closed system is referred to as vapor pressure.A liquid's evaporation rate can be determined by looking at the equilibrium vapor pressure. It has to do with how often particles tend to float away from liquids (or a solid).Volatile is a term used to describe a chemical that has a high vapor pressure at room temperature. Vapor pressure is the force that vapor exerts when it is present above a liquid surface.A liquid's molecules have an increasing kinetic energy as its temperature rises. The more molecules that convert into a vapor as a result of an increase in molecular kinetic energy, the higher the vapor pressure will be.Know more about vapor pressure https://brainly.com/question/14617982
#SPJ4
1. Determine the amount concentration of calcium ions and acetate ions in a 0.80 mol/L
solution of calcium acetate (work out formula first).
Since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.
What is concentration?The term concentration has to do with the amount of substance in solution. The concentration can be measured in several units. Generally, concentration is expressed in molarity, molality, mass concentration units or percentage.
Now we are asked to find the amount concentration of calcium ions and acetate ions in a 0.80 mol/L solution of calcium acetate. The formula of calcium acetate is Ca(CH3COO)2.
Thus;
Ca(CH3COO)2(aq) ----> Ca^2+(aq) + 2CH3COO^-(aq)
It then follows that since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.
Learn more about concentration:https://brainly.com/question/10725862
#SPJ1
In a voltaic (galvanic) cell, oxidation occurs at the _____ and is where _____ in the salt bridge moves toward.
In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.
What is Galvanic Cell ?Galvanic Cell or Voltaic Cell is an electrochemical cell that converts the energy of spontaneous redox reactions into electrical energy. In galvanic cell oxidation occurs at the anode and reduction occurs at the cathode. The anode is positive and cathode is negative, anode attracts anions from solution in an electrolytic cell.
Thus from the above conclusion we can say that In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.
Learn more about the Galvanic Cell here: https://brainly.com/question/15096829
#SPJ1
The density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 via a combustion reaction
The answer is 9.94 ml.
What is density?Density is a word we use to describe how much space an object or substance takes up (its volume) in relation to the amount of matter in that object or substance (its mass). Another way to put it is that density is the amount of mass per unit of volume. If an object is heavy and compact, it has a high density.Given,
The density of ethanol, C2H5OH = 0.789 g/mL
[tex]n (CO_{2} ) = \frac{m}{M} = \frac{15G}{44 g/mol} } = 0.341 mol;[/tex]
[tex]n ( C_{2} H_{2} OH) = \frac{n (CO_{2}) }{2} = \frac{0.341}{2} = 0.1705 mol;[/tex]
[tex]m (C_{2} H_{2} OH) = 0.1705 mol * 46 g/ mol[/tex] = 7.843 g
[tex]V (C_{2} H_{2} OH ) = \frac{7.843}{0.789} = 9.94 ml.[/tex]
Therefore, the answer is 9.94 ml
Learn more about density of ethanol,
brainly.com/question/18597444
#SPJ4
The complete question is -
If the density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 according to the following chemical equation?
C2H5OH(l) + 3 O2(g) → 2 CO2(g) + 3 H2O(l)
What, approximately, is the highest concentration of co2 measured in the earth's atmosphere in modern times?
In modern times the highest concentration of [tex]CO_{2}[/tex] measured in the earth's atmosphere is 400 ppm.
The concentration of the [tex]CO_{2}[/tex] which is also refereed as global annual is increased by 50%.The rise in concentration of the [tex]CO_{2}[/tex] start from 280 ppm during [tex]10^{4}[/tex] years up to the mid-18th century to 421 ppm as of May 2022.The reason behind the rise of concentration of the [tex]CO_{2}[/tex] is the Industrial Revolution.The concentration of the [tex]CO_{2}[/tex] is rises in such pace the it is very dangerous for human health and environment.Learn about global annual
https://brainly.com/question/2921854
#SPJ4
Which properties does uranium-238 have?
The main properties of uranium-238 are as follows,
The uranium-238 have orthorhombic crystal structure.The physical state of uranium-238 is solid.The uranium-238 have acid base properties.The uranium-238 have hard and silver white metal.The natural abundance of uranium-238 is 99%The Atomic mass and atomic weight of uranium-238
The atomic number of uranium-238 is 92The atomic weight of uranium-238 is 238.02learn about uranium-238
https://brainly.com/question/9099776
#SPJ4
Hurricanes derive their energy from: Group of answer choices the latent heat of condensation. the latent heat of fusion. the latent heat of sublimation. the latent heat of vaporization.
Hurricanes derive their energy from the Latent heat of condensation.
Hence, Option (1) is correct answer.
What is Latent Heat ?The heat that is released or absorbed during a phase change of a substance is known as Latent heat.
What is Hurricanes ?Hurricanes is basically a type of storm called a tropical cyclone. These are intense low pressure areas. Hurricanes derive their energy from the latent heat of CONDENSATION.
Thus from the above conclusion we can say that Hurricanes derive their energy from the Latent heat of condensation.
Hence, Option (1) is correct answer.
Learn more about the Latent heat here: https://brainly.com/question/5401454
#SPJ4
These two images have different chemical change words and definitions,
Can someone please help me match the word from its meaning?
Thank you!
Answer:
(1) Acid -------------------------------------> (G) When dissolved in water, its solution has a pH value less than 7. Acids are proton (H⁺ ion) donors.
(2) Alkali -----------------------------------> (E) The oxide, hydroxide, or carbonate of a metal that will react with an acid, forming a salt as one of the products (if a base dissolves in water it is called an alkali. Bases are proton (H⁺ ion) acceptors.
(3) Base ------------------------------------> (I) Its solution has a pH value of more than 7.
(4) Blast furnace ------------------------> (C) The huge reaction vessels used in industry to extract iron from its ore.
(5) Displacement reaction ----------> (R) A reaction in which a more reactive element takes the place of a less reactive element in one of its compounds or in solution.
(6) Mole -----------------------------------> (A) A very large number that is the amount of substance in the relative atomic or formula mass of a substance.
(7) Neutral -------------------------------> (J) A solution with a pH value of 7 which is neither acidic nor alkaline. Alternatively, something that carries no overall charge.
(8) Neutralization ----------------------> (F) The chemical reaction of an acid with a base in which a salt and water are formed. If the base is a carbonate of hydrogen carbonate, carbon dioxide is also produced in the reaction.
(9) Ore -------------------------------------> (P) Ore is rock which contains enough metal to make it economically worthwhile to extract the metal.
(10) Oxidation --------------------------> (B) A reaction where oxygen is added to a substance / or when electrons are lost from a substance.
(11) pH -------------------------------------> (O) A number which shows how strongly acidic or alkaline a solution is.
(12) Pipette ------------------------------> (N) A glass tube used to measure accurate volumes of liquids.
(13) Precipitate -------------------------> (K) An insoluble solid formed by a reaction taking place in solution.
(14) Reactant ---------------------------> (M) A substance we start with before a chemical reaction takes place.
(15) Reduction -------------------------> (S) A reaction in which oxygen is removed or electrons are gained.
(16) Salt ----------------------------------> (Q) A salt is a compound formed when some or all of the hydrogen in an acid is replaced by a metal.
(17) Strong acids ---------------------> (L) These acids completely ionize in solution and have a high concentration of H⁺ (aq) ions in solution.
(18) Universal indicator ------------> (H) A mixture of indicators that can change through a range of colors to show how strongly acidic or alkaline liquids and solutions are.
(19) Weak acids ----------------------> (D) Acids that do not ionize completely in aqueous solutions.
Which models of the atom from task 1 are not supported by rutherfords experimental evidence?
Model not supported is:
Thomson's atomic model of the atom from task 1 are not supported by Rutherford's experimental evidence.
Experiments given by Thomson, Rutherford & Dalton:
The cathode ray tube experiments of J.J. Thomson demonstrated that all atoms contain minute, electron-like subatomic particles that are negatively charged.The plum pudding model of the atom was put up by Thomson and featured negatively charged electrons embedded within a positively charged "soup."The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment.Rutherford postulated the nuclear model of the atom in light of these findings.Atoms, in Dalton's opinion, are the tiniest pieces of matter that can never be further divided. This belief persisted up until the time it was learned that the atom was made up of subatomic particles.Dalton and Thomson's concepts are in conflict with the experimental findings of Rutherford. Dalton's model is unsupported by evidence because it does not include electrons, protons, or neutrons.
Learn more about atomic model here,
https://brainly.com/question/27990920
#SPJ4
Write a balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
The word based equation is
Vanadium(V) oxide + Hydrogen gas → Vanadium (III) oxide + Water
Now write the chemical equation
V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l)
Reactant side Product side
V = 2 V = 2
O = 5 O = 5
H = 4 H = 4
We can see that the number of atoms on reactant side is equal to the number of atoms on product side. So the given equation is balanced.
Thus from the above conclusion we can say that V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
Learn more about the Balanced chemical equation here: https://brainly.com/question/15355912
#SPJ4
Which equation agrees with the ideal gas law?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.
P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.
StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.
The equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction (option A).
What is ideal gas law?Ideal gas law in physics is the equation of state of an ideal gas, which is a gas whose molecules do not interact or collide.
The equation of the ideal gas law is as follows:
PV = nRT
This equation shows that the volume is directly proportional to the volume of the gas.
Therefore, the equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
Learn more about ideal gas law at: https://brainly.com/question/13821925
#SPJ1
option A, v1/t1 = v2/t2
A 17.10 g compound is made up of 5.900 g n and 11.20 g C. What is the percent composition of carbon in this compound?
A 17.10 g compound is made up of 5.900 g n and 11.20 g C. the percent composition of carbon in this compound is 65.5%
The ratio of the amounts of each element to the sum of the individual element amounts present in the compound, multiplied by 100, is the definition of the percent composition of a given compound. In this instance, the quantity is expressed in grams of the constituent ingredients.
You may calculate the mole: mole ratio of the components present in a compound by knowing the % composition of the compound. You can determine the ion ratio in a chemical once you have this information. Mass percent composition is also referred to as mass percent. It is denoted by the symbol w/w percent. Mass percent composition for a solution is equal to the mass of an element in one mole of the compound divided by the compound's molar mass, multiplied by 100%.
To learn more about percent composition please visit -
https://brainly.com/question/17505281
#SPJ1
A solution with a pH = 13 has approximately how many moles of OH– ions per liter?
Answer:
1 × 10-¹ moldm-³
Explanation:
Pkw = PH + POH
14 = 13 + POH
POH = 1
so , [OH-] = 1 × 10-¹ moldm-³
What would be the molecular formula of rose oxide which contains C, H, and O and has two degrees of unsaturation and a molecular ion in its mass spectrum at m/z
The molecular formula of rose oxide:
The formula of rose oxide will be [tex]C_{10}H_{18}O[/tex].
What is the molecular formula?
An expression known as the molecular formula describes how many atoms of each element are present in a single compound's molecule. It shows the exact number of atoms in every molecule.
Use the rule of thirteen to obtain the molecular formula for a chemical whose molecular mass is known. Follow these procedures to obtain the molecular formula:
To get the fundamental formula, multiply the molar mass by 13. (sum of the masses of one carbon atom and one hydrogen atom)
Molecular mass/ 13 = n + r/13
where, n = numerator and r = remainder
Base formula is [tex]C_{n}H_{n+r}[/tex]
Calculation:
Remove the mass of the carbon and hydrogen compound that belongs to the same group as the additional atoms if the molecular formula contains atoms in addition to carbon and hydrogen.
Molecular mass /13 = 154/13
= 11 x 13 = 143
Thus, 11 non-H atoms are 11C.
Thus, the formula is [tex]C_{11}H_{11+11} = C_{11}H_{22}[/tex]
If oxygen, is present then the mass is 16 and remove [tex]CH_{4}[/tex].
[tex]C_{11}H_{22} - CH_{4} + O = C_{10}H_{18}O[/tex]
Thus, the formula of the compound will be [tex]C_{10}H_{18}O[/tex]
Learn more about molecular formula here,
https://brainly.com/question/14425592
#SPJ4