how much is kg in gigapascal?

The higher temperatures often result in greater precipitation because warm air holds more water vapor.

A warmer planet means more precipitation will fall in regions of the world where water vapor is the factor that is currently limiting the amount of precipitation that occurs. This is the condition across a significant portion of the middle and upper latitudes across the Earth.

To put it simply, the amount of precipitation that falls is increasing as temperatures rise because warm air can carry more water vapor. A temperature increase of 1 degree Fahrenheit is equivalent to as much as a 4 percent increase in the amount of water vapor in the atmosphere. Other elements, such as El Nino and La Nina, may also play a role in the amount of rainfall.

To learn more about precipitation, click here:

https://brainly.com/question/18109776

#SPJ4

The power that is applied is approximately 0.9 horsepower when the SUV is going at a velocty of 1.5 m/s.

A horsepower is a unit of power that is commonly used to describe the power output of engines and motors.

One horsepower is equivalent to 746 Watts.

The power exerted on the SUV is calculated using the formula below:

P = F * v

where:

Substituting the given values, we get:

Power = 450 N * 1.5 m/s

Power = 675 Watts

To convert this to horsepower, divide by 746:

675 W / 746 W/hp

Power  = 0.9 horsepower

Learn more about horsepower at: https://brainly.com/question/28379812

#SPJ1

The thickest layer of the earth is the mantle. Option b is correct answer.

The mantle is the layer between the crust and the core, and it makes up about 84% of the earth's total volume. It has a thickness of about 2,900 km, making it much thicker than the crust, which has an average thickness of about 35 km, and the core, which has a radius of about 3,485 km.

The mantle is composed of solid rock that is subject to intense heat and pressure, which causes it to flow like a viscous liquid over very long periods of time. It is divided into the upper and lower mantle, and it plays a crucial role in the movement of tectonic plates and the formation of volcanic activity. Therefore, option b is correct.

To know more about the earth, here

brainly.com/question/12041467

#SPJ4

The three main phases of the development of the solar system are collapse, condensation, and accretion.

The process whereby solids accumulate to become progressively larger structures until planets are established is known as accumulation throughout the study of planets. A disc of coarser solid materials mixed with gas at the beginning has a large extent based of around 1% of the volume of the hydrocarbons.

Small particles are pulled together by attraction forces to form bigger masses during the process of accretion. Gravity draws these particles together, where they combine to form comets and asteroid bodies. Protoplanets are created by collisions between planetesimals.

To know more about accretion visit:

https://brainly.com/question/28807784

#SPJ4

Cold fronts bring cooler weather, clearing skies and sharp change in wind direction.

In the winter, cold fronts bring cold spells and sometimes snow. In the spring or summer, in temperate latitudes, hail may fall along with the rain. If moisture is not sufficient, such as when the system has previously moved across the mountain barrier, then cold fronts can pass without cloudiness.

Cold front is generally associated with stormy weather. Cold front often brings intense weather changes such as thunderstorms whereas a warm front brings light rain or drizzle.

With cold front, cold air advances and displaces warm air as cold air is more dense than warm air.

To know more about weather, refer

https://brainly.com/question/1034593

#SPJ4

The student should avoid using light in the range of 550 nm to 600 nm in their experiment because these are the wavelengths of light that are typically absorbed by chlorophylls in green plants, and the chloroplasts that were used in the experiment lacked pigments that absorb in this range. Here option B is the correct answer.

To measure the activity of the chloroplasts at different wavelengths, the student needs to use a broad range of light wavelengths and avoid using a specific wavelength of light that the chloroplasts cannot absorb.

Of the options given, red light (which has a wavelength range of 620 nm to 750 nm) would be the best choice to avoid in the experiment. This is because red light is absorbed strongly by chlorophyll a and b, which are the primary pigments involved in photosynthesis, and it may interfere with the measurement of activity at other wavelengths.

On the other hand, blue, orange, yellow, and violet light are not strongly absorbed by chlorophylls and can be used in the experiment to measure activity at different wavelengths.

To learn more about wavelengths

https://brainly.com/question/4112024

#SPJ4

Silver has a density of 10.5 g/ [tex]cm^3[/tex] and gold has a density of 19.3 g/ [tex]cm^3[/tex], so out of 5  [tex]cm^3[/tex] of silver or 5  [tex]cm^3[/tex] of gold, the 5  [tex]cm^3[/tex] of gold would have a greater mass as the mass of gold is 96.5 g while the mass of silver is 52.5 g.

The mass of an object is equal to its density multiplied by its volume, so here is the calculation,

For 5 [tex]cm^3[/tex] of silver, the mass is,

mass = density x volume

mass = 10.5 g/ [tex]cm^3[/tex]x 5 [tex]cm^3[/tex]= 52.5 g

For 5  [tex]cm^3[/tex] of gold, the mass is

mass = density x volume

mass = 19.3 g/ [tex]cm^3[/tex]x 5  [tex]cm^3[/tex]

mass = 96.5 g

Hence, silver has a density of 10.5 g/ [tex]cm^3[/tex] and gold has a density of 19.3 g/ [tex]cm^3[/tex], so out of 5  [tex]cm^3[/tex] of silver or 5  [tex]cm^3[/tex] of gold, the 5  [tex]cm^3[/tex] of gold would have a greater mass as the mass of gold is 96.5 g while the mass of silver is 52.5 g.

Learn more about the density and mass relationship here.

https://brainly.com/question/13271221

#SPJ9

A boy on a skateboard pushes off the ground with his foot. he and the skateboard accelerate down the sidewalk due to the force on the ground in one direction.

The ground applies an equal and opposite force on the boy in the opposite direction. This force causes the boy and the skateboard to accelerate forward.

According to Newton's second law of motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

Therefore, the acceleration of the boy and the skateboard will depend on the force applied by the boy's foot and the combined mass of the boy and the skateboard.

To know more about force here

https://brainly.com/question/12785175

#SPJ4

The car will have traveled through an angle of approximately 119.7 degrees when the magnitude of its total acceleration is 2.6 m/s^2.

What is the angle of approximate calculation?

The magnitude of the total acceleration of a car on a curved path can be given by:

a = √(at^2 + ac^2)

where at is the tangential acceleration (1.3 m/s^2), and ac is the centripetal acceleration, which is given by:

ac = v^2 / r

where v is the velocity of the car and r is the radius of the curve (130 m).

Setting a = 2.6 m/s^2, we can solve for v:

v = √(r * a^2 - at^2) = √(130 * 2.6^2 - 1.3^2) = 27.47 m/s

The angle through which the car will have traveled can be found using the equation for the arc length s:

s = r * θ

where θ is the angle in radians. Substituting the values for v and t into the equation for s, we can solve for θ:

θ = s / r = v * t / r

Since the car started from rest, t can be found from the equation for acceleration:

at = v / t

t = v / at = 27.47 / 1.3 = 21.06 s

Finally, substituting t into the equation for θ, we get:

θ = v * t / r = 27.47 * 21.06 / 130 = 2.07 radians = 119.7 degrees

To know more about angle of approximate, Check out:

https://brainly.com/question/27586078

#SPJ4

.

An electrocardiogram (ECG) result called ST segment depression suggests a problem with the electrical activity of the heart.

The ECG's ST segment is a section that shows the beginning of ventricular repolarization. The ST segment is typically flat or just slightly raised in healthy people.

Nonetheless, there can be a reduction in blood supply to the heart tissue, for instance during an angina episode or a heart attack, which can result in ST segment depression.

Additional factors that contribute to ST segment melancholy include drug interactions, electrolyte imbalances, and other cardiac problems. Doctors can establish the proper therapy and the underlying reason by looking at the intensity and location of the ST segment depression.

Learn more about the electrocardiogram at

https://brainly.com/question/9328700

#SPJ4

What does the shift in the period's relationship to its eccentricity reveal about the period's reliance on the eccentricity The duration is independent of eccentricity.

How is an ellipse's eccentricity determined?

Weirdness e = c/a if the focus's distance from the ellipse's center is "c" and the tip of the ellipse's distance from the central is "a." E = 1 b 2 a 2 is another formula to get the eccentricity of an ellipse. 

What does geometric eccentricity mean?

The term "eccentricity" is defined in terms of the fixed-point known as focus as well as the fixed-line known as the perpendicular line in the plane. The definition of eccentricity in geometry, the eccentricity formula, and the eccentric of several conic sections, including parabola, ellipse, and hyperbola, will all be covered in detail in this article along with worked-out examples.

To know more about eccentricity visit:

https://brainly.com/question/30082593

#SPJ4

If you are told that a 20 kilogram object is raised by 10 meters then the mass of the object is 20 kilograms.

What is force of gravity?

Force of gravity is the attractive force between two objects that is due to their masses. It is what causes objects to fall to the ground when dropped and what keeps planets in their orbits. The strength of the gravitational force between two objects depends on their masses and the distance between them. The force of gravity is an inverse square law, meaning that if the distance between two objects is doubled, the force of gravity between them will be one-fourth of what it was originally.

The mass of an object is a measure of the amount of matter it contains and is not affected by changes in its position or location. Therefore, the mass of the object remains the same regardless of how high it is raised. In this case, the mass of the object is 20 kilograms.

Therefore, mass of the object is 20 kilograms is the correct answer.

To learn more about force of gravity from the link

https://brainly.com/question/13634821

#SPJ4

Answer: force

Explanation:

Answer:

Below

Explanation:

The ball has one second to fall from its height and to travel horizontally at 15 m/s

Rate X Time = distance       15 m/s * 1 s   = 15 meters from the platform .

df = do + vot + 1/2 a t^2

  df = final position = o ft ( on the ground)

  do = initial position = height

     vo = original vertical velocity = 0

         a = - 9.81 ms^2

so you have this:

  0 = height + 1/2 (- 9.81)  m/s^2 * (1)^2

       height = 4.9 meters

The calibration nut on a bimetallic stemmed thermometer is used for:  determining if the product's temperature has exceeded safe limits during shipment or subsequent storage.

Bimetallic stemmed thermometer can check temperatures from 0˚F to 220˚F (–18˚C to 104˚C) and this thermometer measures temperature through its metal stem. When checking the temperature, insert the stem into the food up to dimple.

Bimetal thermometers work on the principle that different metals expand at different rates as they get heated. By using two strips of different metals in thermometer, movement of the strips correlates to the temperature and can be indicated along scale.

To know more about bimetallic stemmed thermometer, refer

https://brainly.com/question/24881415

#SPJ4

Answer:

A

Explanation:

A) Force of gravity is 20 N       Yes -   Force is measured in N

B) No.....mass is generaly measured in KG or sub units of it

C) No ... meters is a measure of distance not force

D) No   acceleration is  m/s^2

The energy required for the phase change from solid to liquid for a substance is known as the heat of fusion (C)

The amount of energy that must be supplied to a solid substance (usually in the form of heat) in order to cause a change in the substance's physical state and convert it into a liquid is referred to as the latent heat of fusion, which is also known as the enthalpy of fusion (when the pressure of the environment is kept constant). Because of the usage of this energy in the process of counteracting the attractive force that exists between the molecules, the kinetic energy of the particles does not increase, and as a result, the temperature does not go up.

To learn more about latent heat of fusion, click here:

https://brainly.com/question/8914501

#SPJ4

It moves downward. An electron moving horizontally passes between two horizontal plates, the upper charged negatively, the lower positively. A uniform, upward-directed electric field exist in the region between the plates, and this field exert an electric force downward on the electron.

Electrons are involved in gravitational, electromagnetic, and weak interactions, as well as many other physical phenomena, including electricity, magnetism, chemistry, and thermal conductivity.

Since an electron has charge, it has an electric field surrounding it. If the electron is moving in relation to the observer, the observer will track the electron and produce a magnetic field.

According to the Lorentz force law, an electron's velocity will be impacted by electromagnetic fields created by external sources.

When accelerated, electrons emit or take in energy in the form of photons.

To know more about electron, click the link given below:

brainly.com/question/1255220

#SPJ4

Answer:

Pavg =24.4×20800

Explanation:

1st u(initial velocity)=90×5/18=25m/s

v^2-u^2=2as........v=0

a=-20.8 then force=ma =1000×(-20.8)=-20800

P initial=f×u and P final=f×s/t

Pavg=Pi-Pf=fu-fs/t=f(25-15/25)=f(25-0.6)

Pavg=20800×24.4

Milo  need to leave home at 8.30am in order to get to the basketball game in time to warm up appropriately.

What advantages does a warm-up have?

Your heart rate and blood flow rise as you warm up. More oxygen can now go to your muscles thanks to this. The connections between your nerves and muscles are also activated and primed during a warm-up, which increases movement efficiency.

In general, warm-ups and cool-downs involve performing your activity more slowly and with lesser intensity. Perform five to ten minutes of low-intensity exercise before working out to warm up. Try exercises like jumping jacks, jogging, or walking. Try dynamic stretches, which get your body moving, as opposed to static stretches.

To learn more about exercises use link below:
https://brainly.com/question/18309852

#SPJ4

6kW is the useful power output of the crane.

Define power.

Energy consumption per second is measured as power. The amount of force necessary to create a unit displacement is another way to quantify power. Power, a scalar quantity, is represented by the letter P. For instance, a light bulb with 100 W of electricity will provide more light than one with 10 W.

The power in a circuit is measured using electrical power, which is given in watts. Electrical and mechanical-electrical techniques are used to measure electrical power in centrifugal pump applications. A watt, which represents power, is equivalent to one joule every second.

Power = Work done /Time taken

Time = 2 minutes = 120 seconds.

Work = 720kJ = 720000J

Power =  720000/120 = 6000W

P = 6kW

To learn more about power use link below:
https://brainly.com/question/1634438

#SPJ4

In a Colpitts oscillator, positive feedback is supplied by the capacitive divider formed by two capacitors connected in series between the collector and the emitter of the transistor.

A capacitor is an electrical component that consists of two conductive plates separated by an insulating material known as a dielectric. The capacitor stores electrical energy in the form of an electrostatic field between the two plates. When a potential difference is applied between the plates, it creates an electric field which can store energy.

The output of the oscillator (the collector voltage) is fed back to the base of the transistor via the capacitive divider. As the collector voltage increases, the voltage across the two capacitors increases, which increases the base current of the transistor, further increasing the collector voltage and thus providing positive feedback.

To learn more about capacitors

https://brainly.com/question/27753307

#SPJ4

The largest types of clouds found in the interstellar space is called Molecular clouds. It mostly composed of molecular hydrogen and dust.

Molecular clouds are also known as dark nebula, which is massive interstellar clump or cloud. It is completely opaque due to the presence of dust and are usually visualized as dark patches between bright galaxies. These molecular clouds are the birth place of stars.

These clouds have higher density because of the higher number of hydrogen molecules per cubic centimeters. Some is said to have more than 10⁵ H₂ molecules per cm³. These clouds are so large, even individual clouds are bigger than stars, and the whole clump may be so large that there will be 150 light years to travel across.

So the largest clouds in interstellar space are molecular clouds.

For more information regarding molecular clouds, kindly refer

https://brainly.com/question/13838387

#SPJ4

The total distance traveled by the car when accelerating at a rate of 3. [tex]56 m/s^3[/tex] is 11.2 meters.

Acceleration is the rate at which an object's velocity with respect to time changes. Acceleration is defined as a change in velocity over time. It is the pace at which the speed or direction of an item changes. It is determined using the formula a = (vf - vi)/t, where vf is the end velocity, vi is the beginning velocity, and t is the time period. Acceleration can be induced by a force such as gravity or by the motion of an item itself, such as when an automobile accelerates.

In the given question, the man will get a total distance of 40.1 meters.

This is calculated by using the equation d = v0t + 1/2[tex]at^{2}[/tex],

where v0 is the initial velocity (3.56 m/s), a is the acceleration (2.50 m/[tex]s^{2}[/tex]), and t is the time (9.28 s).

Plugging in these values, we get d = 3.56*9.28 + 0.5*2.50*[tex](9.28)^{2}[/tex] = 40.1 meters.

To know more about acceleration follow the link

brainly.com/question/29220990

#SPJ4

The stress exerted on the string as it swings in a horizontal circle is 6.56 Newton. frequency is 1/1.09 = 0.92 Hz, and f is 1. (2L) × √T/m\s0.92 = 1/2(1.4) (1.4) (T)/4 multiply everything by 4 ((T/16) 0.92 = 0.36)

3.68 = 1.44 × √T \s √T = 3.68/1.44 = 2.56 \s T = 2.56² = 6.56

"How much of a quantity" is how the word "magnitude" is defined. The magnitude, for instance, can be used to describe a comparison of the speeds of a car and a bicycle. Additionally, it can be used to describe how far an object has traveled or how much of an object is represented by its magnitude.

The energy released at the earthquake's epicenter is measured in magnitude. Seismograph readings are used to calculate magnitude. The magnitude of the shaking caused by an earthquake is measured by its intensity. The impact on humans is used to gauge intensity.

To know more about Magnitude visit:

https://brainly.com/question/1447482

#SPJ4

The ratio of the intensity of voice for someone standing in front of the person  to the intensity for someone standing behind is 10:1

Intensity is a physical quantity that measures the amount of energy that flows through a given area per unit of time. In the context of sound waves, intensity refers to the amount of energy carried by sound waves per unit of time and per unit of area. It is related to the amplitude (or height) of the sound waves, which determines how much the pressure varies in the medium through which the waves travel. The unit of intensity is watts per square meter (W/m^2). The intensity of sound waves is important in many applications, such as in measuring the loudness of sounds, determining safe exposure levels to noise, and designing acoustic systems.

The difference in the sound level in decibels (dB) between two positions can be calculated using the following formula:

ΔL = 10 log10(I2/I1)

where ΔL is the difference in dB, I1 is the intensity at the first position, and I2 is the intensity at the second position.

In this case, the sound level is 10 dB higher is known for someone standing directly in front than for someone at the same distance but directly behind you. Using this information to set up the following equation:

10 dB = 10 log10(I_front/I_back)

where I_front is the intensity of voice for someone standing in front and I_back is the intensity of voice for someone standing behind

We can simplify this equation by dividing both sides by 10:

1 dB = log10(I_front/I_back)

Now, raise both sides of the equation to the power of 10:

10^1 = I_front/I_back

Simplifying this expression

I_front/I_back = 10

So the ratio of the intensity of your voice for someone standing in front of you to the intensity for someone standing behind you is 10:1. In other words, your voice is 10 times louder for someone standing directly in front of you than for someone at the same distance but directly behind you.

To know more about Intensity, visit:

https://brainly.com/question/17062836

#SPJ4

Answer:

झझकोर देने की कोशिश की है और यह बात उस समय की है जब कुंवर जी के लिए एक ही है कि वह इस बात को भी नहीं

It has 10,000 joules of potential energy.

Potential energy is the energy stored in an object due to its position or configuration. This type of energy is due to the force of gravity and is determined by the mass of the object, the height it is raised, and the acceleration due to gravity.

In this case, the object has a mass of 20 kilograms and is raised by 10 meters. The acceleration due to gravity is 9.8 m/s2. When the object is raised, it gains 10,000 joules of potential energy, which can be calculated using the equation: PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height the object is raised. Thus, in this example, PE = (20 kg)(9.8 m/s2)(10 m) = 19,600 joules.

To know more about potential energy click-
https://brainly.com/question/24933254
#SPJ4

Answer:

Below

Explanation:

Density is  mass / volume   so any of these that have numerator mass and denominator volume qualify  

g/ ml      and   kg/ L    are the only ones