Answer:
The amount of water that can be heated by 1,000.0 J of heat energy depends on the mass of water and the specific heat capacity of water.
Assuming the water is at an initial temperature of 20.0°C, we can use the formula:
Q = mcΔT
Where:
Q = heat energy (Joules)
m = mass of water (in grams)
c = specific heat capacity of water (4.184 J/g°C)
ΔT = change in temperature (final temperature - initial temperature)
Rearranging the formula to solve for the mass of water:
m = Q / (c*ΔT)
Plugging in the given values:
m = 1000 J / (4.184 J/g°C * (final temperature - 20.0°C))
Assuming the final temperature is 100.0°C (the boiling point of water at standard pressure), the calculation becomes:
m = 1000 J / (4.184 J/g°C * (100.0°C - 20.0°C))
m = 1000 J / (4.184 J/g°C * 80.0°C)
m = 2.39 grams
Therefore, 1,000.0 J of heat energy can heat 2.39 grams of water from 20.0°C to 100.0°C.
Ethanol (C2H5OH) boils at a temperature of 78.3 degrees C. What amount of energy, in joules, is necessary to heat to boiling and then completely vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C? The specific heat of ethanol is approximately constant at 2.44 JK−1g−1. The heat of vaporization of ethanol is 38.56 kJ mol−1.
The total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.
To calculate the amount of energy, in joules, necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C, we must first calculate the heat necessary to heat the sample to the boiling point of ethanol, 78.3 degrees C. The formula to calculate the amount of energy is: Q = mcΔT, where m is the mass of the sample, c is the specific heat of ethanol, and ΔT is the temperature change from 11.1 degrees C to 78.3 degrees C. Thus, the amount of energy necessary to heat the sample is: Q = 13.1 g * 2.44 JK−1g−1 * (78.3-11.1) = 1,623.08 J.
Next, we must calculate the amount of energy necessary to completely vaporize the sample. To do so, we must use the heat of vaporization of ethanol, which is 38.56 kJ mol−1. To convert from moles to grams, we must use the molar mass of ethanol, which is 46 g/mol. Thus, the amount of energy necessary to vaporize the sample is: Q = (13.1 g/46 g/mol) * 38.56 kJ/mol = 7.15 kJ.
Finally, to calculate the total amount of energy necessary to heat and vaporize the sample, we must add the two values together: Q = 1,623.08 J + 7.15 kJ = 7.15 kJ. the total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.
For more such questions on ethanol
https://brainly.com/question/29523373
#SPJ11
Account for the fact that neither of the following compounds undergoes a Dieis- Alder reaction with maleic anhydride. -on, CH
These compounds X and Y do not undergo a Diels-Alder reaction with maleic anhydride.
The Diels-Alder reaction is a type of reaction in which two molecules react to form a larger, more complex molecule. In this reaction, one molecule must contain a double bond and the other must contain two or more electron-withdrawing groups (EWGs). The EWGs provide electron density to the double bond, allowing it to react. The double bond must also be a conjugated system, meaning it must consist of alternating single and double bonds.
Neither of the compounds X and Y undergoes a Diels-Alder reaction with maleic anhydride. The given information can be best explained by considering the molecular structure of the two compounds X and Y. Diels-Alder reaction is a chemical reaction that forms a cyclohexene ring by reacting a conjugated diene with a substituted alkene or alkyne.
Maleic anhydride is a cyclic dicarboxylic acid anhydride with a molecular formula of C4H2O3. It is a colorless or white crystalline solid with a pungent odor.
In the case of both compounds (X and Y) provided, neither contains a double bond nor a conjugated system. Without a double bond, the reaction does not occur. Without an EWG, the reaction does not occur. Therefore, these compounds do not undergo a Diels-Alder reaction with maleic anhydride.
For more such questions on Diels-Alder reaction , Visit:
https://brainly.com/question/30474400
#SPJ11
PLSSSSS HELPPPPPPPPPPPP
A Model Atom
In this lab, you will examine the relationship between an element’s
location on the periodic table and its number of valence electrons.
You will use this information to draw models of three elements and
their valence shells
Let's choose sodium (Na) as an example, which is in period 3.
Sodium has 1 valence electron.
The element next to sodium on the periodic table is magnesium (Mg), also in period 3.
Magnesium has 2 valence electrons, which is one more than sodium.
add curved arrows to show the mechanism of the propagation steps to form each monochlorination product shown.
To form each of the monochlorination products shown, you will need to draw curved arrows that demonstrate the propagation steps. The first step is when a chlorine radical combines with the double bond to form a chlorine radical cation, which then donates an electron to the double bond.
This results in the formation of two radical chlorides, one on each carbon atom. These radicals then combine with two hydrogen atoms to form the monochlorination product, completing the reaction.The curved arrows for this process should be drawn as follows:
An arrow pointing from the chlorine radical to the double bond, representing the attack of the radical all arrows have been drawn, the monochlorination product has been formed. The mechanism of propagation steps to form each monochlorination product is shown in the following reaction:To represent this reaction, you can draw a curved arrow to show the movement of electrons from the bond to the chlorine. The arrow should start from the carbon-carbon double bond and point towards the chlorine.
Then, another curved arrow can be drawn to represent the formation of the C-Cl bond. The arrow should start from the chlorine and point towards the carbon with the unpaired electron.This process can be repeated to form the second monochlorination product. The following diagram shows the mechanism of the propagation steps:Here, you can see that the curved arrows are used to represent the movement of electrons during the reaction. The arrows point towards the atom that is gaining the electrons.
For more such questions on radical
https://brainly.com/question/289555
#SPJ11
If only 1600 grams of CO2 are produced, what is the percent error of this reaction?
Answer:
Take 1600grams divide by 2
Please help me. Thank you
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C. for given equilibrium partial pressure .
What is Gibbs energy ?The Gibbs energy is the thermodynamic potential that is minimized when a system reaches chemical equilibrium at constant pressure and temperature when not driven by an applied electrolytic voltage. Its derivative with respect to the reaction coordinate of the system then vanishes at the equilibrium point.
Using the formula
ΔG° = - R × T ln K
WHERE R= 8.3144598 J⋅mol⁻¹⋅K⁻¹.
T = 298 K
K = 0.82
SOLVING ,
The standard change in Gibbs energy at 25 degree Celsius is 490.6 °C.
To know more about Gibbs energy , visit ;
brainly.com/question/20358734
#SPJ1
a solutionwith a ph of 11 is first tested with phenolphthaelin and then with litmus what is the color of each indicator in this solution
In a solution with a pH of 11, phenolphthalein will turn pink, and litmus will turn purple.
The solution with a pH of 11 is first tested with phenolphthalein and then with litmus. When a solution with a pH of 11 is tested with phenolphthalein, the color is pink. When the same solution is tested with litmus, the color is blue.
Phenolphthalein and litmus are commonly used as indicators in acid-base titration, where a pH change can be detected by a change in color. These indicators have different pH ranges where their colors change, making them useful in identifying the pH of a solution.
For more such questions on phenolphthalein , Visit:
https://brainly.com/question/2815636
#SPJ11
Venoconstriction ________ the amount of blood within the venous system, which ________ the volume in the arterial and capillary systems.A) doubles; decreasesB) reduces; increasesC) decreases; doublesD) increases; reducesE) reduces; reduces
Venconstriction B) reduces the amount of blood within the venous system, which increases the volume in the arterial and capillary systems.
Venoconstriction is the process of narrowing a vein by reducing its diameter. It could happen if the smooth muscles in the vein walls contract. This increases resistance to blood flow, which aids in the maintenance of blood pressure. Venoconstriction happens when the sympathetic nervous system activates to regulate blood flow. This response is triggered by many factors, including exercise, standing up, and emotional stress.
Venoconstriction is a normal bodily response that maintains blood flow and pressure. Blood pressure within the arterial system will rise when venous return decreases. The veins provide an essential volume reserve for the cardiovascular system. They serve as a storage tank for blood, and this is where the venous return is established.
The regulation of venous return is critical to the maintenance of cardiac output and arterial blood pressure. A decrease in venous return will result in a decrease in end-diastolic volume and, thus, a decrease in stroke volume. This is often followed by a drop in cardiac output, which causes arterial blood pressure to fall. Venous return can be affected by various factors, including venoconstriction or venodilation. Therefore option B is correct.
Know more about Venous return here :
https://brainly.com/question/29819510
#SPJ11
If He(g) has an average kinetic energy of 7450 J/mol
under certain conditions, what is the root mean square speed of F2(g) molecules under the same conditions?
The root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.
How to solve for the rms speed of F2(g) molecules ?The root mean square (rms) speed of a gas molecule is related to its average kinetic energy (KE) by the following equation:
rms speed = √(3RT/M)
Where
R is the gas constantT is the temperature in KelvinM is the molar mass of the gasTo solve for the rms speed of F2(g) molecules, we need to know the temperature and molar mass of F2(g). Let's assume that the temperature is the same as the conditions in which He(g) has an average kinetic energy of 7450 J/mol. The molar mass of F2 is 2 x the molar mass of one fluorine atom, which is approximately 19 amu.
Substituting these values into the equation, we get:
rms speed = √(3RT/M)rms speed = √(3 x R x T / M)rms speed = √(3 x 8.314 J/mol·K x T / 38.00 g/mol)rms speed = √(24.942 J/K·mol x T / 38.00 g/mol)rms speed = √(0.6564 J/K x mol x T)Now we can solve for the rms speed by plugging in the given value of average kinetic energy for He(g) and solving for T:
7450 J/mol = (1/2) x (3/2) x R x T
T = 7450 J/mol / (1.5 x 8.314 J/mol·K)
T = 597 K
Substituting this value of T into the equation for rms speed, we get:
rms speed = √(0.6564 J/K x mol x 597 K / 1 mol)
rms speed = 431.3 m/s
Therefore, the root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.
Learn more about average kinetic energy here : brainly.com/question/492249
#SPJ1
what is the ph of 0.352 m triethylammonium iodide, (c2h5)3nhi. the kb of triethylamine, (c2h5)3n, is 5.2 x 10-4.
The pH of 0.352 M triethylammonium iodide, (C2H5)3NI, is 8.11.
This is calculated using the following equation:
pH = -log(Kb x [I-])
Where Kb is the base dissociation constant for triethylamine, (C2H5)3N, which is 5.2 x 10-4, and [I-] is the concentration of iodide ions, which is 0.352 M.
First, calculate the concentration of triethylamine, (C2H5)3N:
[(C2H5)3N] = (0.352 M) / (1 + Kb x (0.352 M))
[(C2H5)3N] = 0.351 M
Then, calculate the concentration of iodide ions, [I-], in the solution:
[I-] = 0.352 M - 0.351 M
[I-] = 0.001 M
Finally, calculate the pH of the solution:
pH = -log(Kb x [I-])
pH = -log(5.2 x 10-4 x 0.001)
pH = 8.11
Therefore, the pH of 0.352 M triethylammonium iodide, (C2H5)3NI, is 8.11.
For more such questions on pH
https://brainly.com/question/172153
#SPJ11
What is the percentage yield when 20g of aluminium are produced from 50g of aluminium oxide
Answer:
,
Explanation:
Refer to pics.............
26.4g is the percentage yield when 20g of aluminium are produced from 50g of aluminium oxide.
What is percentage yield?The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield increased by 100% divided by the experimental yield. The percentage return is 100% if the theoretical and actual yields are equal. Because the real yield is frequently lower than the theoretical value, percent yield is typically lower than 100%.
This may be due to incomplete or conflicting reactions or sample loss during recovery. If the percent yield is more than 100%, more sample than expected was retrieved from the reaction. This may have happened when other reactions took place and the product was also created.
2Al[tex]_2[/tex]O[tex]_3[/tex] → 4 Al + 3O[tex]_2[/tex]
2 mole of Al[tex]_2[/tex]O[tex]_3[/tex] =4 mol of Al
2(2×27+48) =4×27
204g of Al[tex]_2[/tex]O[tex]_3[/tex] = 108g of Al
50g of Al[tex]_2[/tex]O[tex]_3[/tex] =x
26.4g =x
Therefore, 26.4g is the percentage yield when 20g of aluminium are produced from 50g of aluminium oxide.
To know more about percentage yield, here:
https://brainly.com/question/30774234
#SPJ2
By studying fossils, scientists have learned that
A.
both animals and plants have changed over time.
B.
animals have changed over time, but plants have not.
C.
plants have changed over time, but animals have not.
D.
neither animals nor plants have changed over time.
Write the electron configuration for:
Cs+
Mg2+
Te2-
Cl-
(Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
The electron configuration of Cs⁺ is [Xe].
The electron configuration of Mg²⁺ is [Ne].
The electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.
The electron configuration of Cl⁻ is [Ne]3s²3p⁶.
What is the electron configuration of the ions?Cs⁺: The Cs⁺ ion has lost one electron from the neutral Cs atom, which has an electron configuration of [Xe]6s¹. Therefore, the electron configuration of Cs⁺ is [Xe].
Mg²⁺: The Mg²⁺ ion has lost two electrons from the neutral Mg atom, which has an electron configuration of [Ne]3s². Therefore, the electron configuration of Mg²⁺ is [Ne].
Te²⁻: The Te²⁻ ion has gained two electrons compared to the neutral Te atom, which has an electron configuration of [Kr]5s²4d¹⁰5p⁴. Therefore, the electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.
Cl⁻: The Cl⁻ ion has gained one electron compared to the neutral Cl atom, which has an electron configuration of [Ne]3s²3p⁵. Therefore, the electron configuration of Cl⁻ is [Ne]3s²3p⁶.
Learn more about electron configuration here: https://brainly.com/question/11316046
#SPJ1
DNA is said to be the organism's genetic fingerprint. What does it mean? Give one application of this concept
Answer:
DNA is an organism's genetic fingerprint because it contains unique genetic information that determines its development, function, and reproduction. This unique DNA sequence can be used for identification purposes, such as establishing paternity or maternity, identifying suspects in criminal investigations, and identifying remains in forensic investigations. The field of forensic science uses DNA analysis to compare DNA profiles from crime scenes to those of potential suspects, resulting in the conviction of many criminals who would have otherwise gone unpunished.
provide the reagents needed to carry out the following synthesis hint: halogenation of a ring can be done with the halogen and uv light
The reagents needed to carry out the halogenation of a ring are a halogen (e.g. bromine or chlorine) and ultraviolet (UV) light. The halogen is added to the ring in a reaction flask, and then the flask is exposed to UV light to activate the reaction.
The reagents required to carry out the given synthesis, which involves the halogenation of a ring with a halogen and UV light, are described below. The following are the reagents needed for the synthesis is Halogen and UV Light
The halogenation of a ring can be done with the halogen and UV light. The halogen and UV light are the two reagents needed to carry out this reaction. Halogens like fluorine, chlorine, bromine, and iodine can be used in halogenation. Halogenation of organic compounds is a common technique used in organic synthesis. Halogens' electronegativity makes them highly reactive, and their addition to a molecule usually results in the formation of new carbon-halogen bonds.
For more such questions on halogenation , Visit:
https://brainly.com/question/16662265
#SPJ11
Classify each of the following as an exothermic or endothermic reaction. Drag the appropriate statements to their respective bins. Reset Help The energy level of the reactants is lower than that of the products. The combustion of wood provides energy A reaction releases 101 J. Exothermic Endothermic Submit Request Answer
1. The energy level of the reactants is lower than that of the products. - Endothermic
2. The combustion of wood provides energy - Exothermic
3. A reaction releases 101 J. - Exothermic
What is an Endothermic?
An endothermic process or reaction is a chemical or physical process that absorbs heat from the surroundings. In an endothermic process, energy is required to break the bonds in the reactants and form new bonds in the products. As a result, the temperature of the surroundings decreases, and the process feels cold to the touch. Examples of endothermic processes include melting ice, cooking an egg, and evaporating water.
What is an Exothermic?
An exothermic process or reaction is a chemical or physical process that releases heat into the surroundings. In an exothermic process, energy is released as the bonds in the reactants are broken and new bonds are formed in the products. As a result, the temperature of the surroundings increases, and the process feels warm to the touch. Examples of exothermic processes include burning a candle, combustion reactions, and the reaction between baking soda and vinegar.
To know more about Endothermic, visit:
https://brainly.com/question/23184814
#SPJ1
structural change from a myoglobin tertiary structure to the inclusion of quaternary structure for hemoglobin
The quaternary structure of hemoglobin is responsible for the increased oxygen-carrying capacity and stability of the molecule. This structure allows hemoglobin to better transport oxygen throughout the body and is essential to life.
The structural change from myoglobin to hemoglobin includes an additional quaternary structure, which is the arrangement of two or more myoglobin subunits into a single, functional entity. This structural change allows for the cooperative binding of oxygen, meaning that the hemoglobin molecule can carry more oxygen than a single myoglobin molecule can. This is due to the increased surface area of the hemoglobin molecule, which provides more oxygen-binding sites. Additionally, the quaternary structure of hemoglobin increases the stability of the molecule, meaning it can better resist changes in pH or temperature. This is important because it allows hemoglobin to function in the wide range of temperatures and environments that are found within the human body.
To learn more about Hemoglobin :
https://brainly.com/question/11102357
#SPJ11
If you have the following data about a container of rice, about how many grains of rice are estimated to be in the container? Mass of Rice + Container = 786 grams Mass of 1000 Grains of Rice = 28 grams Mass of Container ONLY = 332 grams Approximately, how many grains of rice are in the container?
The number of the grains of rice that we have from the question here is 16214 grains
What is the mass of rice?In this case, we know that we have to rely on the information that we have in the question so as to be able to obtain the mass of the rice that we need in this case and that is what we are going to set out to do in this question.
We know that;
Mass of the Rice = 786 grams - 332 grams
= 454 g
If 1000 grains of rice have a mass of 28 g
x grains of rice have a mass of 454 g
x = 1000 * 454/28
x = 16214 grains
Learn more about rice:https://brainly.com/question/11877986
#SPJ1
The equilibrium constant, K, relates quantity of products to reactants at a point when the reaction is ____.
The equilibrium constant, K is related to the amount of products and reactants at which the reaction reaches at equilibrium (a point where reaction rate is zero). So, the correct choice to fill up the blank is at equilibrium.
Equilibrium define when the rate of the forward reaction is equal to the rate of the backward reaction. The mathematical ratio showing the concentration of the product divided by the concentration of the reactant is called the equilibrium constant K. See the image above for an expression representing it. It expresses the relationship between the products and reactants of a reaction in equilibrium with a particular unit.
Equilibrium constants depend only on temperature and are independent of concentrations, pressures, and volumes of reactants and products. It is also independent of the presence of catalysts and the presence of inert materials. Thus, the right choice for filling the blank is at equilibrium.
For more information about equilibrium constant, refer:
https://brainly.com/question/19340344
#SPJ4
true or false the water cycle affects weather
Answer:
true
The water cycle affects the weather and climate of a particular region in multiple ways
Polymers plays an important role in the molecular economy of the cell
Polymers are large molecules made up of repeating subunits called monomers, and they are essential building blocks for many cellular structures and processes.
What are molecules ?A molecule is a group of two or more atoms that are chemically bonded together. Molecules are the fundamental units of compounds, which are substances made up of two or more different types of atoms.
Molecules can have a variety of sizes and shapes, depending on the number and arrangement of atoms. Some molecules are simple, consisting of just a few atoms, while others are much larger and more complex, such as proteins or DNA. The properties and behavior of a substance depend largely on the types of molecules it contains and how those molecules interact with each other.
To know more about molecules visit :
https://brainly.com/question/28931982
#SPJ1
Gaseous ethane (CH3CH3) reacts with gaseous oxygen gas (0₂) to produce gaseous carbon dioxide (CO₂) and gaseous water (H₂O). If 69.7 g of carbon
dioxide is produced from the reaction of 26.76 g of ethane and 169.4 g of oxygen gas, calculate the percent yield of carbon dioxide.
Round your answer to 3 significant figures.
Answer:
The balanced chemical equation for the reaction is:
C2H6 + 3O2 → 2CO2 + 3H2O
To calculate the theoretical yield of CO2, we need to use the given amount of ethane and oxygen gas to determine which reactant is limiting, and then use stoichiometry to calculate the amount of CO2 that should be produced.
First, we need to calculate the number of moles of ethane and oxygen gas used in the reaction:
moles of ethane = 26.76 g / 30.07 g/mol = 0.8908 mol
moles of oxygen gas = 169.4 g / 32.00 g/mol = 5.304 mol
Next, we need to determine which reactant is limiting by comparing the number of moles of each reactant to their stoichiometric coefficients in the balanced equation. The stoichiometric ratio of ethane to oxygen gas is 1:3, so every one mole of ethane requires three moles of oxygen gas. Therefore, the limiting reactant is ethane, because there are only 0.8908 moles of it, whereas there are 5.304 moles of oxygen gas.
Using the stoichiometry of the balanced equation, we can calculate the theoretical yield of CO2:
moles of CO2 = moles of ethane × (2 moles of CO2 / 1 mole of C2H6) = 0.8908 mol × 2 = 1.7816 mol
mass of CO2 = moles of CO2 × molar mass of CO2 = 1.7816 mol × 44.01 g/mol = 78.5 g
Now, we can calculate the percent yield of CO2:
percent yield = (actual yield / theoretical yield) × 100%
actual yield = 69.7 g
percent yield = (69.7 g / 78.5 g) × 100% = 88.7%
Therefore, the percent yield of CO2 is 88.7%.
Write the electronic configuration and draw the orbital diagram for the element: lead (Z=82) State if it is diamagnetic/paramagnetic. Please decide the diamagnetic/paramagnetic property based on the orbital diagram only! (It is okay to use the noble gas in square brackets here)
Answer:
See below.
Explanation:
The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is
1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²
The orbital diagram for the valence electrons of lead (Pb) is
↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓
s s p p p p d d
2 1 6 2 6 2 10 10
|||||||||
1 2 3 4 5 6 7 8
The notation ↑↓ represents a pair of electrons with opposite spins.
To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.
identify the reactant that you would use to make the following compound via an aldol addition reaction.
In general, an aldol addition reaction involves the addition of an enolate ion or enol to an aldehyde or ketone.
What is an enolate ion?
The enolate or enol acts as a nucleophile, attacking the carbonyl carbon of the aldehyde or ketone, resulting in the formation of a beta-hydroxy carbonyl compound called an aldol.
To carry out an aldol addition reaction, you would typically need an appropriate carbonyl compound, which can act as an electrophile, and a base, such as sodium hydroxide or lithium diisopropylamide (LDA), which can generate the enolate or enol. The choice of reactants would depend on the specific aldol addition reaction being carried out and the desired product to be formed.
To know more about enolate ion, visit:
https://brainly.com/question/15853875
#SPJ1
What is the theoretical oxygen for 100 moles of propane undergoing the following combustion reaction? CsHs+502->3CO2+4 H20 O 350 moles O 21 moles O 500 moles O 400 moles
When 100 moles of propane undergo the given combustion reaction, 500 moles of oxygen will be required.
The combustion reaction of propane is given by:C₃H₈ + 5O₂ → 3CO₂ + 4H₂OFor every mole of propane, five moles of oxygen are required to complete the combustion reaction. Therefore, for 100 moles of propane, 500 moles of oxygen will be required.Theoretical oxygen for 100 moles of propane undergoing the combustion reaction is 500 moles of oxygen. Thus, the correct option is (C) 500 moles. The theoretical oxygen required is different from the actual oxygen required, which may vary due to incomplete combustion or other factors that affect the reaction.
For more such questions on combustion reaction
https://brainly.com/question/13251946
#SPJ11
An emission spectrum has a line in the blue region. How does this occur in the atom?
A. An electron ABSORBS a photon as it goes from a HIGHER TO LOWER energy level.
B. An electron EMITS a photon as it goes from a HIGHER TO LOWER energy level.
C. An electron EMITS a photon as it goes from a LOWER TO HIGHER energy level.
D. An electron ABSORBS a photon as it goes from a LOWER TO HIGHER energy level.
The correct response is B. An electron EMITS a photon as it goes from a HIGHER TO LOWER energy level.
What is electron?A subatomic particle with a negative electric charge is called an electron. Together with protons and neutrons, it is one of the fundamental particles that make up an atom.
When an atom is excited, its electrons have the ability to transition from one energy level to another. These stimulated electrons will eventually revert to their initial lower energy levels since they are unstable. They do this by releasing energy in the form of particular wavelength photons. Each element has a distinct set of energy levels, which leads to the emission of photons at a certain wavelength and the formation of a distinct emission spectrum.
In this instance, the existence of a line in the emission spectrum's blue section shows that an electron has released a photon with a certain wavelength that corresponds to the region's blue color. A photon with an energy equal to the difference between the two levels is released when an excited electron returns from a higher energy level to a lower energy level.
To know more about electron, visit:
https://brainly.com/question/1255220
#SPJ1
A sample of cobalt (II) chloride is hydrated with an unknown number of waters, CoCl₂ XH₂O. The initial mass of the CoCl₂-XH₂O was 1.0000 g and after heating and dehydrating the sample the residual CoCl₂ weighed 0.5460 g.
how many grams were released from the sample after heating?
how many moles of water were released from the sample after heating?
how many moles of CoCl2 remained after heating?
what is the value of X in CoCl2•XH2O rounded to the nearest integer?
The mass of water released is 0.454 g
Moles of water released is 0.025 moles
Moles of CoCl2 remaining is 0.0042 moles
Value of x is 6
What is a hydrated compound?Mass of water released = 1. 0 g - 0.5460 g = 0.454 g
Moles of water released = 0.454 g/18 g/mol = 0.025 moles
Moles of CoCl2 remaining = 0.5460 g/130 g/mol = 0.0042 moles
We have;
Number of moles of anhydrous compound = Number of moles of hydrated compound
1/130 + 18 x = 0.0042
0.0042 (130 + 18x) = 1
0.546 + 0.0756x = 1
x = 1 - 0.546 /0.0756
x = 6
The value of x is 6
Learn more about hydrated compounds:https://brainly.com/question/27078278
#SPJ1
which will not have an abbreviated electron configuration beginning with the argon core? select the correct answer below: sc mn cl k
The element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1. the correct answer is potassium (K).
The electron configuration of an element specifies the number of electrons in each of its atomic orbitals. The elements on the periodic table are arranged in order of increasing atomic number, which corresponds to the number of protons and electrons in the nucleus of an atom. Elements with an atomic number higher than 18, such as scandium (Sc), manganese (Mn), and chlorine (Cl), have electron configurations that begin with the noble gas argon (Ar) core of [Ar]3d10 4s2. However, the element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1.
Therefore, the correct answer is potassium (K).
For more such questions on electron configuration
https://brainly.com/question/26084288
#SPJ11
Find the pH of a solution that is 9.0x10-2 M H₂CO3.
Express your answer using two decimal places
The pH of a solution that is 9.0 x 10-² M hydrogen carbonate is 1.05.
How to calculate pH?pH is a figure expressing the acidity or alkalinity of a solution on a logarithmic scale.
On the logarithmic scale, 7 is neutral, lower values are more acidic and higher values more alkaline. The pH of a solution can be calculated using the following expression;
pH = −log10 c
where;
c is the hydrogen ion concentration in mol/LAccording to this question, the concentration of a hydrogen carbonate solution is 9.0 × 10-²M. The pH can be calculated as follows:
pH = - log {9 × 10-²}
pH = 1.05
Learn more about pH at: https://brainly.com/question/17603212
#SPJ1
Which equation is a correctly written thermochemical equation?
OC3H8 (g) +502 (g) → 3CO2 (g) + 4H₂O (1), AH= -2,220 kJ/mol
OFe (s) + O2 (g) → Fe₂O3 (s), AH= -3,926 kJ
ONH₂Cl → NH₂ + + Cl
O2C8H18 + 250216CO2 + 18H₂O, AH=-5,471 kJ/mol
Answer:
The correctly written thermochemical equation is:
C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (l), ΔH = -2,220 kJ/mol
This equation represents the combustion of propane (C3H8) in the presence of oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), with a heat release of -2,220 kJ/mol. The state symbols (g) for gases and (l) for liquids indicate the physical state of each substance at standard conditions.
Explanation:
ABOVE