How quickly can mitosis occur in a paramecium?

two or three times a week
more than once each day
once each day
every two hours

The climatic change in Earth's history that has resulted in glaciers is the cold climate.

During the last 2.6 million years, the Earth has experienced a series of ice ages, or periods of colder global climate, which have led to the growth of glaciers in regions with sufficient snowfall.

These colder periods are associated with changes in the Earth's orbit, tilt, and precession, which affect the amount and distribution of solar radiation received by the Earth. These climatic changes have had significant impacts on the Earth's surface and have influenced the evolution of life on our planet.

Learn more about climate change, here:

https://brainly.com/question/28779953

#SPJ1

The change in temperature (ΔT) when a 25 g block of aluminum absorbs 10,000 J of heat is approximately 44.32°C.

To calculate the change in temperature (T) that occurs when an aluminium block absorbs a certain quantity of heat, we must utilise the specific heat capacity of aluminium (c) and the equation:

Q = mcΔT

Where Q is the heat absorbed or released, m is the substance's mass, c is the substance's specific heat capacity, and T is the temperature change.

The specific heat capacity of aluminium is approximately 0.897 J/g°C.

Given that the aluminium block weighs 25 g and absorbs 10,000 J of heat, we can plug the following values into the equation:

(25 g) * (0.897 J/g°C) * T = 10,000 J

We can now solve for T:

T = 10,000 joules / [(25 g) * (0.897 J/g°C)]

ΔT ≈ 44.32°C

for more questions on temperature

https://brainly.com/question/4735135

#SPJ11

The difference between q for the two-step process and q for the one-step process is 220.38 joules.

To solve this problem, we use the first law of thermodynamics, which states that change in internal energy (ΔU) of system will be equal to the heat (q) added or removed from the system, minus the work (w) done by or on the system;

[tex]Δ_{U}[/tex] = q - w

For an ideal gas, the internal energy depends only on the temperature, so [tex]Δ_{U}[/tex] is zero if the final temperature is the same for both processes. Therefore, we can set [tex]Δ_{U}[/tex] to zero and solve for the difference in heat (q) between the two processes;

q(two-step) - q(one-step) = w(two-step) - w(one-step)

The work done by or on the gas can be calculated using the equation;

w = -P[tex]Δ_{V}[/tex]

where P is the external pressure, and [tex]Δ_{U}[/tex] is the change in volume. The negative sign indicates that work is done on the gas when it is compressed ([tex]Δ_{U}[/tex] < 0), and work is done by the gas when it expands ([tex]Δ_{U}[/tex] > 0).

For the two-step process, we can calculate the work done in two stages;

w(two-step) = -2.00 atm × (4.40 L - 2.20 L) - 2.50 atm × (2.20 L - 1.76 L)

= -3.32 atm L - 0.605 atm L

= -3.925 atm L

For the one-step process, we can calculate the work done in one step;

w(one-step) = -2.50 atm × (4.40 L - 1.76 L)

= -6.10 atm L

Substituting these values into the equation for the difference in heat, we get;

q(two-step) - q(one-step) = -3.925 atm L - (-6.10 atm L)

= 2.175 atm L

To convert this to joules, we need to multiply by the conversion factor for atm L to joules;

1 atm L = 101.3 J

Therefore; q(two-step) - q(one-step) = 2.175 atm L × 101.3 J/atm L

= 220.38 J

Therefore, the difference in heat between the two processes is 220.38 joules.

To know more about  first law of thermodynamics here

https://brainly.com/question/3808473

#SPJ1

The north pole of one magnet is near the South pole of the other magnet.

The ends of a magnet are called its poles. One end is called the north pole, the other is called the south pole. If you line up two magnets so that the south pole of one faces the north pole of the other, the magnets will pull toward each other.

0.361 moles of N₂ were required to produce 12.3 g of NH₃, using the balanced chemical equation N₂ + 3H₂ → 2NH₃.

The balanced chemical equation for the reaction is N₂ + 3H₂ → 2NH₃. We can use the balanced equation and the molar mass of NH₃ to calculate the number of moles of N₂ required to produce 12.3 g of NH₃,

1 mol NH₃ = 2 mol N₂ (from the balanced equation)

molar mass of NH₃ = 17.03 g/mol

moles of NH₃ = 12.3 g / 17.03 g/mol

moles of NH₃ = 0.722 mol

moles of N₂ = (0.722 mol NH₃) / 2

moles of N₂ = 0.361 mol

Therefore, 0.361 moles of N₂ were needed to produce 12.3 grams of NH₃.

To know more about moles, visit,

https://brainly.com/question/29367909

#SPJ1

Complete question - For the reaction, N₂ + 3H₂ → 2NH₃. Given 12.3 grams of NH3, how many moles of N₂ were needed?​

One would expect to find the densest ocean water at the bottom of the ocean, where the water is coldest and under the greatest pressure.

Ocean water is densest at the bottom, where it is coldest and under the greatest pressure. The salt content of seawater does affect its density, but it is not the primary factor. The density of seawater is determined by its temperature and salinity.

As seawater evaporates, the concentration of salt increases, but the volume of water decreases, leading to an increase in density. However, this effect is relatively small compared to the influence of temperature. Colder water is denser than warmer water, which means that the deep ocean is much denser than the surface.

Therefore, The density of seawater at the bottom of the ocean can reach up to 1,040 kilograms per cubic meter, which is almost 5% denser than surface seawater.

For more such questions on ocean

https://brainly.com/question/31034213

#SPJ11

After the minimum point, the conductance typically increases again as the concentration of ions in the solution increases.

Without additional context, it is difficult to determine what exactly is being referred to by "this minimum point." However, in general, the conductance of an electrolyte solution depends on the concentration of ions in the solution. Before the minimum point, the conductance typically increases as the concentration of ions in the solution increases. This is because more ions are available to carry the electric current through the solution, leading to a higher conductance. At the minimum point, the conductance reaches a minimum value due to a balance between the effect of ion concentration and the effect of ion mobility. At this point, the concentration of ions in the solution is not high enough to support a high conductance, while the mobility of the ions is not low enough to reduce the conductance significantly. The ion concentration rises to a level where it can support a larger conductance than at the minimum point, which causes this increase in conductance to occur. The addition or removal of a solute, the reaction between various species in the solution, or any number of other events can cause the concentration of ions in the solution to change throughout the process of changing ion concentrations. The amount of accessible ions in the solution is affected by the change in concentration, and this in turn influences the conductance of the solution. In conclusion, the concentration of ions in an electrolyte solution affects the conductance of the solution. The conductance rises with increasing ion concentration, falls to a minimal value at a specific point, and then rises once more with increasing ion  concentration continues to increase. The ion concentration in the solution can change due to various factors, which can affect the conductance of the solution.

For more such questions on conductance

https://brainly.com/question/29419715

#SPJ11

It is significant to remember that the order of a reaction affects how a reaction's half-life is calculated. It is commonly expressed in seconds and is represented by the sign "t 1/2." The amount which is left after 172.8 years is 0.8 g.

The time it takes for the concentration of a particular reactant to reach 50% of its initial concentration, or the time it takes for the reactant concentration to reach half of its initial value, is known as the half-life of a chemical reaction.

To calculate the remaining amount:

N₀ / N = 2ⁿ

n = time / t1/2

172.8 / 57.6 = 3

N = 2ⁿ / N₀

N = 2³ / 10 = 0.8 g

To know more about half-life, visit;

https://brainly.com/question/31821452

#SPJ1

The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.

Thus, The electrode surface inside the measurement cell is where the reactions take place.

The ruthenium label is oxidized at the electrode surface as an electrical potential is applied, and TPA is oxidized into a radical cation that spontaneously loses a proton.

When the resultant TPA radical interacts with oxidized ruthenium, the ruthenium label enters an excited state and emits a photon (620 nm) before decaying. The ruthenium label is renewed and ready to carry out numerous light-generating cycles as it goes back to its ground state.

Thus, The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.

Learn more about tripropylamine, refer to the link:
https://brainly.com/question/32070784?

#SPJ1

The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is approximately -[tex]2.57 * 10^{-12 }.[/tex] Joules

The balanced nuclear equation for the fusion of 3H and 1H to form 4He is shown below:

3H + 1H → 4He

We find that the difference in mass between the reactants and products is: (3 × 3.01605 u) + (1 × 1.00783 u) - (1 × 4.00260 u) = -0.01854 u

Einstein's energy equation is E = mc².

E = (-0.01854 u) × (1.66054 × 10^-27 kg/u) × (2.998 × 10^8 m/s)^2

E = [tex]-4.03 * 10^{-12}[/tex] J

The number of reactions  =  2.55 g / 4.00260 g/mol = 0.637 mol

The total energy is =  [tex]-4.03 * {10^-12} J[/tex]× 0.637 mol

total energy = [tex]2.57 * 10^{-12} J[/tex]

Learn more about Einstein's energy equation at:

https://brainly.com/question/27158464

#SPJ1

The solubility of[tex]LaF_3[/tex] in water is 3.04 x 10^-6 mol/L.

The solubility of [tex]LaF_3[/tex] in water can be determined using the Ksp expression:

[tex]Ksp = [La^{3+}][F^-]^3[/tex]

Where [tex][La^{3+}][/tex]and [tex][F^-][/tex] are the molar concentrations of the [tex]La^{3+}[/tex] and [tex]F^-[/tex] ions in the solution.

Since each [tex]LaF_3[/tex] formula unit dissociates into one [tex]La^{3+}[/tex] ion and three [tex]F^-[/tex] ions, the molar solubility of [tex]LaF_3[/tex] can be represented as x. Thus, the molar concentrations of [tex]La^{3+}[/tex] and [tex]F^-[/tex] ions in the solution can be written as x and 3x, respectively.

Substituting these values into the Ksp expression gives:

Ksp = x*(3x)^3 = 27x^4

Now, we can solve for x:

x = (Ksp/27)^(1/4)

= (2 x 10^-19 / 27)^(1/4)

= 3.04 x 10^-6 mol/L

For more question on solubility click on

https://brainly.com/question/24057916

#SPJ11

The half-life of the radioactive isotope is 8 days.

Mass at 8 days = 8000 g

Number of half-lives in 4000 g = 8000 / 4000 = 2 half life

Time needed for 1000g to remain is 32 days.

The half life of a chemical reaction is the time required by the substance to reach half of its concentration. It is a characteristic property of the  unstable atomic nuclei and the way in which they decay.

For a given reaction the half life of a reactant is the time required for its concentration to reach a value that is the arithmetic mean of its initial and final value. For a reactant that is entirely consumed it is the time taken for the reactant concentration to fall to one half of its initial value.

Learn more about Half life, here:

https://brainly.com/question/31666695

#SPJ1

27 grams of water are produced from the given amounts of hydrogen and oxygen.

To determine the amount of water produced from the reaction between hydrogen and oxygen, we need to compare the amounts of reactants (hydrogen and oxygen) to the stoichiometry of the balanced chemical equation.

The balanced equation is:

2H₂ + O₂ → 2H₂O

The molar mass of hydrogen (H₂) is 2 g/mol, and the molar mass of oxygen (O₂) is 32 g/mol.

Given:

Mass of hydrogen = 3 grams

Mass of oxygen = 24 grams

We can calculate the number of moles of each reactant by dividing their respective masses by their molar masses:

Number of moles of hydrogen = 3 grams / 2 g/mol = 1.5 moles

Number of moles of oxygen = 24 grams / 32 g/mol = 0.75 moles

According to the balanced equation, the ratio of hydrogen to water is 2:2, and the ratio of oxygen to water is 1:2. Therefore, the limiting reactant in this reaction is oxygen, as it is consumed in a smaller quantity compared to the stoichiometry of the reaction.

From the reaction, we can see that 1 mole of oxygen produces 2 moles of water. Thus, the number of moles of water produced is twice the number of moles of oxygen:

Number of moles of water = 2 * 0.75 moles = 1.5 moles

To determine the amount of water produced in grams, we multiply the number of moles by the molar mass of water (H₂O), which is approximately 18 g/mol:

Mass of water produced = 1.5 moles * 18 g/mol = 27 grams

for more such questions on water

https://brainly.com/question/19491767

#SPJ11

The heat capacity of a system is defined as the amount of heat required to raise the temperature through 1°C. It is denoted by c. It is an extensive property. The mass of steel bar is 47.93 g.

Here the amount of heat taken by the steel rod is equal to the amount of heat lost by water. The heat required to raise the temperature of the sample of mass 'm' having specific heat 'c' is:

Q = c (T - T₀) m

Cs (Ts - T0s) ms = -Cw (Tw - T0w) mw

ms = - Cw (Tw - T0w) mw / Cs (Ts - T0s)

Mass of water = 110 mL × 1.00 g / mL = 110.00 g

ms = -4.18 J / g°C × (21 .10 - 22.00) 110.00 g / 0.452 J / g°C (21.10 - 2.00) = 47.93 g

To know more about heat capacity, visit;

https://brainly.com/question/29766819

#SPJ1

Here is the balanced chemical equation for the reaction involving [tex][Cu(OH_2)_6]^{2+}:[/tex]

[tex][Cu(OH_2)_6]^{2+} + 4Cl^- = [CuCl_4]^{2-} + 6H_2O[/tex]

In this reaction, [tex][Cu(OH_2)_6]^{2+}[/tex] is a complex ion of copper(II) that reacts with chloride ions to form the complex ion [tex][CuCl_4]^{2-}[/tex] and water molecules.

The balanced equation indicates that for every one mole of [tex][Cu(OH_2)_6]^{2+[/tex] that reacts, four moles of chloride ions are required and two moles of [tex][CuCl_4]^{2-[/tex] and six moles of water are produced.

A balanced chemical equation is a written representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation.

In other words, the law of conservation of mass is obeyed in a balanced chemical equation, which states that the total mass of the reactants must equal the total mass of the products.

For more question on balanced chemical equation click on

https://brainly.com/question/11904811

#SPJ11

SAICA: South African Institute of Chartered Accountants

SAIPA: South African Institute of Professional Accountants

IRBA: Independent Regulatory Board for Auditors

B1. It is challenging for anybody to know whether the distributed budget summaries of Shoprite and Fight LTD mirror the genuine outcomes for the monetary year.

The reviewers' reports give some affirmation that the budget summaries are reasonably introduced, however they don't ensure the exactness or culmination of the data.

The inspectors' perspective depends on their assessment of the fiscal summaries and their evaluation of the bookkeeping approaches and gauges utilized by the organizations. Nonetheless, there is as yet a gamble of material misquote because of misrepresentation or mistake.

B2. In light of the review reports, it is hard to figure out which organization is a superior speculation. The two organizations got unfit suppositions, it are decently introduced to demonstrate that their fiscal reports.

In any case, the review reports truly do feature a few dangers and vulnerabilities that could influence the organizations' monetary exhibition. For instance, Fight's review report makes reference to a gamble connected with the effect of the Coronavirus pandemic on the organization's tasks and monetary outcomes.

Financial backers would have to lead extra examination and investigation to figure out which organization is a superior venture.

B3. No, the examiners don't give an outright affirmation that everything is precise and can be depended upon. In both review reports, the evaluators express that their viewpoint depends on their assessment of the budget summaries and their appraisal of the bookkeeping approaches and gauges utilized by the organizations.

In any case, they likewise note that there is a gamble of material misquote because of extortion or blunder, and that their assessment may not recognize every material error.

B4. SAICA represents the South African Organization of Contracted Bookkeepers, SAIPA represents the South African Foundation of Expert Bookkeepers, and IRBA represents the Autonomous Administrative Board for Examiners. The jobs and targets of these bodies are as per the following:

SAICA:

Jobs and targets:

Controlling the bookkeeping calling in South Africa

Setting moral and expert norms for bookkeepers

Giving instruction, preparing, and improvement for bookkeepers

Advancing the interests of the bookkeeping calling

Explicit and general activities in the event of amateurish direct:

Exploring grumblings of wrongdoing

Restraining individuals who have disregarded moral or expert principles

Suspending or disavowing the enrollment of individuals who are viewed as at legitimate fault for serious unfortunate behavior

SAIPA:

Jobs and targets:

Controlling and supporting the expert bookkeeping calling in South Africa

Setting moral and expert norms for bookkeepers

Giving schooling, preparing, and advancement for bookkeepers

Advancing the interests of the bookkeeping calling

Explicit and general activities in the event of amateurish direct:

Researching protests of unfortunate behavior

Restraining individuals who have disregarded moral or expert principles

Giving direction and backing to individuals who need help to agree with norms.

IRBA:

Jobs and goals:

Managing reviewers and the review calling in South Africa

Setting moral and expert norms for evaluators

Leading quality confirmation surveys of review firms

Advancing public trust in the review calling

Explicit and general activities in the event of amateurish direct:

Exploring grumblings of wrongdoing

Restraining evaluators who have abused moral or expert guidelines

Giving direction and backing to inspectors who need help to agree with principles

B5. Three kinds of review proof that the examiners of Fight Gathering Ltd might have used to show up at their perspective are:

Affirmation of balances: the inspectors might have mentioned affirmations from Fight's clients and providers to confirm the precision of the records receivable and creditor liabilities adjusts.

Perception: the reviewers might have noticed Fight's stock build up to confirm the presence and valuation of stock.

Scientific methodology: the examiners might have carried out logical systems, like pattern examination and proportion investigation, to distinguish any uncommon changes or connections in the monetary information.

To learn more about Audits, refer:

https://brainly.com/question/13769200

#SPJ1

The coordinate of the other x-intercept of a parabola with axis of symmetry x = -2 and crossing the x-axis at (-5,0) is (-1,0).

We know the vertex of the parabola in the example above is at the location (-2, y), where y is an integer. This is because the vertical line that passes through the vertex of a parabola is its axis of symmetry.

Since the parabola intersects the x-axis at (-5,0), we can infer that this location is a parabola's root. Given that the parabola is symmetric, a second root that is located at the same distance from the axis of symmetry must also exist.

The other root must be 3 units to the right of the axis of symmetry because the distance between the axis of symmetry and (-5,0) is 3 units to the left. The opposite x-intercept is therefore at (1, 0) or (-2 + 3, 0).

To know more about parabola, visit,

https://brainly.com/question/64712

#SPJ1

Based on the information regarding the titration, as the pH of the solution decreases, phenolphthalein will change color to pink.

The best indicator to use for a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0 is phenolphthalein.

Phenolphthalein is an indicator that changes color in the pH range of 8.3 to 10.0. In basic solutions, phenolphthalein is colorless. As the pH of the solution decreases, phenolphthalein will change color to pink. The color change will be observed at the equivalence point of the titration, which is the point at which the amount of acid added is equal to the amount of base present. At the equivalence point, the pH of the solution will be 7.0.

Learn more about titration on

https://brainly.com/question/186765

#SPJ1

The synthesis of N-methyl-4-(p-tolyldiazenyl)aniline can be accomplished in a few steps, as outlined below:

Step 1: Nitration of toluene

Step 2: Reduction of p-nitrotoluene

Step 3: Diazotization of p-toluidine

Step 4: Coupling with N-methylaniline

Toluene is first nitrated to form p-nitrotoluene. This can be done by treating toluene with a mixture of nitric acid and sulfuric acid under controlled conditions. The reaction can be represented as follows:

Toluene + HNO3 → p-nitrotoluene + H2O

The p-nitrotoluene is then reduced to form p-toluidine, using a reducing agent such as iron and hydrochloric acid. The reaction can be represented as follows:

p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3

The p-toluidine is then diazotized using nitrous acid to form the diazonium salt. The reaction can be represented as follows:

p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O

The diazonium salt is then coupled with N-methylaniline to form N-methyl-4-(p-tolyldiazenyl)aniline. The reaction can be represented as follows:

p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl

Overall reaction:

Toluene + HNO3 → p-nitrotoluene + H2O

p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3

p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O

p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl

It is important to note that these reactions require careful handling and should only be attempted by individuals with proper training and experience in organic chemistry.

For more question on synthesis click on

https://brainly.com/question/30332351

#SPJ11

The total volume of HCl(aq) used in the titration was 9.50 mL, the total volume of NaOH(aq) used was 3.80 mL, and the molarity of the sodium hydroxide solution was 0.25 M.

To determine the total volume of HCl(aq) used in the titration, we subtract the initial buret reading from the final buret reading:

Total volume of HCl(aq) = final buret reading - initial buret reading

Total volume of HCl(aq) = 25.00 mL - 15.50 mL

Total volume of HCl(aq) = 9.50 mL

To determine the total volume of NaOH(aq) used in the titration, we use the same approach:

Total volume of NaOH(aq) = final buret reading - initial buret reading

Total volume of NaOH(aq) = 8.80 mL - 5.00 mL

Total volume of NaOH(aq) = 3.80 mL

To calculate the molarity of the sodium hydroxide solution, we use the following formula:

Molarity of NaOH(aq) = (Molarity of HCl(aq) * Volume of HCl(aq)) / Volume of NaOH(aq)

Substituting the given values, we get:

Molarity of NaOH(aq) = (0.10 M * 9.50 mL) / 3.80 mL

Molarity of NaOH(aq) = 0.25 M

Therefore, the molarity of the sodium hydroxide solution is 0.25 M.

Learn more about Titration here:

https://brainly.com/question/13307013

#SPJ1

The vibrational modes and unique possible states for each mode are detailed in the table below.

A vibrational mode of a molecule refers to a specific way in which the atoms inside a molecule can move relative to each other. Molecules are made up of atoms that are connected to each other by chemical bonds, and these bonds act like springs that can vibrate.

When a molecule absorbs energy, it can cause the bonds to stretch, bend, or twist in specific ways, creating different vibrational modes. The vibrational modes of a molecule can provide important information about its structure and chemical properties.

Find out more on vibrational modes here: https://brainly.com/question/30936396

#SPJ1

The maximum mass of carbon dioxide that could be produced by the chemical reaction is 46.2 g

First, we shall determine the limiting reactant. This obtained as follow

2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O

From the balanced equation above,

116 g of CH₃(CH₂)₂CH₃ reacted with 416 g of O₂

Therefore,

48 g of CH₃(CH₂)₂CH₃ will react with = (48 × 416) / 116 = 172.14 g of O₂

From the above calculation, we can see that a higher amount (i.e 172.14 g) of O₂ than what was given (i.e 54.6 g) is needed to react with 48 g of CH₃(CH₂)₂CH₃

Thus, the limiting reactant is O₂

Finally, we shall determine maximum mass of carbon dioxide, CO₂ produced. Details below:

2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O

From the balanced equation above,

416 g of O₂ reacted to produce 352 g of CO₂

Therefore,

54.6 g of O₂ will react to produce = (54.6 × 352) / 416 = 46.2 g of CO₂

Thus, the maximum mass of carbon dioxide, CO₂ produced is 46.2 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

1. Using your knowledge of the Brønsted-Lowry theory of acids and bases, complete the following acid-base reactions and indicate each conjugate acid-base pair.

i. OH + HPO₂ → H₂O + H₂PO₄²⁻

The conjugate acid-base pair is OH/H₂O, HPO₂²⁻/H₂PO₄²⁻

2) Identify the conjugate acid-base pairs in the following reactions. Write A, B, CA, and CB below the appropriate substance.

i. HCO₃⁻ + NH₃ → NH₄⁺ + CO₃²⁻

The conjugate acid-base pair is HCO₃⁻/CO₃²⁻, NH₃/NH₄⁺

ii. HCI + H₂O → H₃O⁺ + Cl⁻

The conjugate acid-base pair is H₂O/OH⁻, HCI/Cl⁻, H₃O⁺/H₂O, Cl⁻/HCI

iii. CH₃COOH + H₂O → H₃O⁺ + CH₃COO⁻

The conjugate acid-base pair is CH₃COOH/CH₃COO⁻, H₂O/OH⁻, H₃O⁺/H₂O

iv. HOCI + NH₃ → NH₄⁺ + ClO⁻

The conjugate acid-base pair is HOCI/ClO⁻, NH₃/NH₄⁺

3. Write the formula for conjugate bases formed by the following acids.

i. HPO₄²⁻ → PO₄³⁻

ii. H₂O → OH⁻

iii. CN⁻ → HCN

iv. HOOC-COO⁻ → HOOCCOOH

4) Write the formula for conjugate acids formed by each of the following bases.

i. H₃O⁺ → H₂O

ii. HCN → H₂CN⁺

iii. NH₃ → NH₄⁺

5. Classify each of the following pH values as acidic, basic, or neutral.

Learn more about Conjugate base pairs here:

https://brainly.com/question/13336099

#SPJ1

The amount of heat absorbed by 400 grams of water from 20°C to 99°C is 132,214.4 J.

The amount of heat absorbed or released by a substance can be calculated using the following equation;

Q = mc∆T

Where;

According to this question, 400.0 grams of water is heated in a pot on the stove from 20ºC to 99°C. The amount of heat absorbed can be calculated as follows:

Q = 400 × 4.184 × {99 - 20}

Q = 132,214.4 J

Learn more about heat at: https://brainly.com/question/26322639

#SPJ1

Answer:

A

Explanation:

If Hydrogen is H₂  There will be two silver

and is Carbon is C There will only be one gray

and if Oxygen is O₃ There will be three red

Answer:

The three major differences are: atmosphere (vacuum in space), radiation (high level of dangerous particles), and gravity (weightlessness in space). The first difference between the Earth and space is the atmosphere.Jan

The only significant differences from living on Earth are that they operate in the confined space of the Space Shuttle orbiter cabin and that they, and all objects inside the cabin, float.

Explanation:

mark branliest

The debate on what will provide secure and sustainable energy for the United States is of great concern to Americans, and the policies set by National and State Politicians play a crucial role in determining how the United States uses energy.

In this context, a letter can be written to a government official such as a governor, senator, or president, to clearly state the claim/conclusion about the best options for energy production.

Evidence from this activity, as well as additional research, can be used to persuade the reader of the claim.

Thus by doing so, it can be ensured that energy policies are developed with the best options for energy production in mind, leading to a more secure and sustainable future for the United States.

For more details regarding research, visit:

https://brainly.com/question/18723483

#SPJ1