How to use ln (natural logarithem) function in matlab

Based on the NEC Table 310.16, the minimum allowable size of aluminum conductor for 151A is 3/0 AWG. Therefore, the answer is (d) 3/0 AWG AL.

To determine the size of the aluminum conductors required for the 120/240V, single-phase service using the optional method, we need to calculate the total calculated load (TCL) and the demand factor (DF). The TCL is the sum of the loads in the dwelling unit. Air-Conditioning Unit: 5 hp x 746 W/hp = 3730 W, Baseboard Heat: 4 x 2.50 kW = 10 kW, Total Calculated Load = 1 kVA + 1.50 kW + 1.50 kVA + 6 kW + 14 kW + 4.50 kW + 3730 W + 10 kW= 36.28 kW Next, we need to calculate the demand factor based on the square footage of the dwelling unit.

Learn more about aluminum here:

https://brainly.com/question/9496279

#SPJ4

For AC voltage, there is one "V" symbol. DC voltage is denoted by the other "V" symbol. A "V" with a "" over it will represent the AC voltage sign. A "V" with a solid and dashed line over the V will serve as the symbol for DC voltage.

"Direct Current Voltage" is the abbreviation for it. Despite how perplexing it may sound, the term "DC" has come to mean a system with constant polarity more generally. DC voltage is therefore a voltage that creates or would produce a DC current.

A 12VDC power supply is an apparatus that provides electricity to a load. To put it another way, a power supply's main function is conversion.

To know more about AC voltage visit:-

brainly.com/question/14049052

#SPJ4

The activation energy for the production of vacancies is determined to be 1.23 eV by measuring increases in the resistivity of platinum wires caused by quenching. The concentration of vacancies is 10-'-10-s at the melting point.

After quenching down to 4 K and under extremely low vacancy concentrations for ultrahigh purity aluminum, the formation energy of vacancies is determined. The result is determined to be (0.69 & 0.03) eV. The formation energy obtained from similar tests using pure magnesium is (0.79 f 0.03) eV. In order to compute the rate, multiply the number of unoccupied units by 100, then divide the resulting amount by the overall number of units. The sum of the occupancy rate and vacancy rate should be 100 percent. As a result, a 300-unit apartment complex with 30 vacant units has a 10% vacancy rate.

To learn more about platinum click on the link below:

brainly.com/question/15614668

#SPJ4

This statement is generally true. In most cases, waste piping is designed to connect to drain piping on the outlet side of traps or at other designated locations in drainage piping.

Traps are important components of plumbing systems that are designed to prevent the flow of sewer gases, insects, and other pests from entering a building through the plumbing system. They are typically installed in waste piping near the fixture that they serve, such as a sink, toilet, or shower.

The waste piping that connects to these fixtures typically leads to the inlet side of the trap, which is designed to hold a small amount of water that forms a seal to prevent sewer gases from entering the building. From there, the drain piping usually connects to the outlet side of the trap, allowing waste water to flow out of the building and into the sewer or septic system.

There may be some exceptions to this general rule, depending on the specific design of the plumbing system and local building codes. In some cases, for example, a waste line may be connected directly to a building's vent stack to improve drainage and prevent the buildup of gases. However, these types of configurations are typically designed and installed by licensed plumbers or other qualified professionals who are familiar with local plumbing codes and best practices.

In summary, while there may be some variations in the design and configuration of waste and drain piping in different plumbing systems, it is generally true that waste piping connects to drain piping on the outlet side of traps or at other designated locations in drainage piping.

To know more about drainage: https://brainly.com/question/29432940

#SPJ4

The formula S = sqrt(P2 + Q2) can be used to compute the apparent power of an electromagnet that consumes 3 kW of active power and 4 KVAR of reactive power.

A coil surrounding a magnetic core through which an electric current is delivered to magnetise the core is what makes up an electromagnet. Wherever controlled magnets are needed, such as in devices where the magnetic flux needs to be adjusted, reversed, or turned on and off, an electromagnet is utilised.

S = sqrt((3 kW)² + (4 KVAR)² = sqrt(9 + 16) kVA = sqrt(25) kVA = 5 kVA

Therefore, the apparent power is 5 kVA.

B) To calculate the power factor, we can use the formula:

PF = P / S

where PF is the power factor, P is the active power, and S is the apparent power.

Substituting the given values, we get:

PF = (3 kW) / (5 kVA) = 0.6

Therefore, the power factor is 0.6. Since the power factor is less than 1, the load is said to have a lagging power factor.

To know more about electromagnet visit:-

https://brainly.com/question/30415081

#SPJ4

According to ASTM specification C33 (Table 5.5), the maximum sieve size for standard size number 3 is 19.0 mm and the nominal maximum sieve size is 25.0 mm.

Adhering to standard sizes and sieve specifications in construction materials testing is important for several reasons. First, it ensures consistency and accuracy in the testing process, which is critical for making informed decisions about the quality and suitability of materials for a particular project. Second, it helps to facilitate communication and collaboration among different stakeholders, such as contractors, engineers, and regulators. Finally, it helps to ensure compliance with industry standards and regulations, which can help to prevent accidents, reduce costs, and improve overall project outcomes.

To know more about Materials visit:

brainly.com/question/30503992

#SPJ4

Chemical energy is considered not renewable because it comes from finite sources, such as fossil fuels (coal, oil, and natural gas), which are limited in availability and take millions of years to form.

Why chemical energy considered not renewable?

Once these sources (mentioned in above answer) are depleted, they cannot be replenished in a timescale that is relevant to human civilization. Furthermore, the extraction, transportation, and use of fossil fuels can have significant environmental impacts, such as air and water pollution and greenhouse gas emissions, contributing to climate change.

In contrast, renewable energy sources, such as wind, solar, and hydro power, are replenished naturally and continuously and do not deplete finite resources. They are also typically cleaner and have fewer negative impacts on the environment.

To learn more about renewable energy, visit: https://brainly.com/question/30006732

#SPJ4

A section in a canal which is used to raise water and boats is called a "lock."

What is a lock?

A lock is a device used in canals to control the water level and allow boats to move from one level to another.

Canals are often built on a series of locks to accommodate changes in elevation, such as hills or valleys, along their route.

The lock operates by sealing off a chamber, filling or emptying it to match the water level on either side, and then opening the gates to allow boats to enter or exit.

Locks have been used for thousands of years to manage water levels in canals and waterways, and they are an essential component of many water transportation systems.

They allow boats to move from one body of water to another, even when there are significant differences in elevation, and they play an important role in the history and development of many regions.

To know more about boat lock system , visit: https://brainly.com/question/29580376

#SPJ4

Be careful not to generalize, interpret your results incorrectly, or make a conclusion from your data without any supporting evidence.

lab report The procedures you took to obtain and analyze the data are described in the method section. Provide sufficient information so that others can follow or assess your practices. Put the past tense in this section. You must show that you comprehend the experiment you just carried out in this summary part. Include a one-paragraph summary that concisely explains your main findings. The most crucial section of your lab report is the discussion since it is here that you demonstrate that you have not only finished the experiment but also that you are aware of its broader ramifications. The discussion part is used to contextualize experimental findings in relation to the broader engine.

Learn more about engine here-

https://brainly.com/question/29214145

#SPJ4

The author of "Teens and Technology Share a Future" mostly praises social media as a sort of technology.

Technology can have a negative impact on kids' capacity to focus, relationships, and their ability to acquire social skills. their social skills being developed. As a result, more kids may become introverted, shy, or scared by social circumstances.

Human history has been shaped by technology, which has fundamentally altered how people live. People and products can travel considerably more quickly thanks to telephones, the Internet, and motors, and we can instantly contact with individuals anywhere in the world.

To know more about technology visit:-

https://brainly.com/question/15059972

#SPJ1

Catalytic converters, scrubbers, and electrostatic precipitators are examples of Technologies used to control pollution emissions.

What are electrostatic precipitators and scrubbers?

To remove particles like smoke and dust, electrostatic precipitators are utilised. With electrostatic precipitators, the only technique of purification is electrostatic attraction, which is also employed by wet scrubbers to draw pollutants. A common technique for eliminating small particulates from airstreams is electrostatic precipitation. Particles suspended in the airstream are given an electric charge when they enter an electrostatic precipitator, where they are then removed under the influence of an electric field.

A catalytic converter is a component that attaches to the front of an automobile's exhaust system, near the engine, and lowers the emission of gaseous pollutants such carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbons (HCs).

Learn more about the Catalytic converters here: https://brainly.com/question/16918753

#SPJ4

YSU may refer to Youngstown State University, which is a public research university in Ohio, USA that offers various engineering programs.

An engineer is a professional who builds, constructs, and maintains a variety of equipment, structures, and information systems. Engineers must also abide with the financial and time constraints imposed by their companies. Engineers are experts in their fields and are constantly developing and creating.

We have a wide range of engineering disciplines, many of which are highly specialized and created to address the great diversity of difficulties we confront. The four main groups into which engineering can be divided are chemical, civil, electrical, and mechanical engineering.

To know more about engineering programs visit:-

https://brainly.com/question/29626079

#SPJ4

The cutoff frequency of a low pass filter is 1591.55 radians per second or 253.30 Hz, and the amplitude ratio is calculated using the formula A = 1 / where A is the amplitude ratio, f is the frequency in Hertz, and fc is the cutoff frequency. To plot the amplitude ratio versus frequency, the graph should start at 0.01fc and end at 100fc, and the vertical axis should range from 0 to 1.

Amplitude ratio refers to the ratio of the amplitude of a signal or system output to the amplitude of its input. It is typically expressed in decibels (dB), which is a logarithmic scale used to measure the relative strength of a signal. A positive amplitude ratio indicates amplification, while a negative amplitude ratio indicates attenuation or damping. In the context of filters, the amplitude ratio is used to measure the filter's frequency response, which indicates how a filter attenuates or passes certain frequencies.

a) To calculate the cutoff frequency of a low pass filter, we can use the formula: A = 1 / [tex]\sqrt{1 + (f/fc)^{2} }[/tex]

where is the cutoff frequency in Hertz, R is the resistance in ohms, and C is the capacitance in farads.

Using the values given in question 1, R = 10 kΩ and C = 0.1 µF = 0.1 x  F, we get:

fc = 1 / (2 * π * 10 kΩ * 0.1 x 10^-6 F)

= 1591.55 rad/s

To convert radians per second to Hertz, we divide by 2π, so:

= 1591.55 / (2 * π)

≈ 253.30 Hz

Therefore, the cutoff frequency of the low pass filter is 1591.55 radians per second or 253.30 Hertz.

b) The amplitude ratio for a low pass filter can be calculated using the formula:

A = 1 / [tex]\sqrt{1 + (f/fc)^{2} }[/tex]

where A is the amplitude ratio, f is the frequency in Hertz, and fc is the cutoff frequency in Hertz.

Using the cutoff frequency calculated above, we can calculate the amplitude ratio for each frequency:

f = 0.01fc

A = 1 / sqrt(1 + [tex](0.01)^{2}[/tex])

≈ 0.995

f = 0.1fc

A = 1 / sqrt(1 + [tex](0.1)^{2}[/tex])

≈ 0.977

f = fc

A = 1 / sqrt(1 + [tex]1^{2}[/tex])

≈ 0.707

f = 10fc

A = 1 / sqrt(1 + [tex](10)^{2}[/tex])

≈ 0.098

f = 100fc

A = 1 / sqrt(1 + [tex](100)^{2}[/tex])

≈ 0.010

To plot the amplitude ratio versus frequency, we can use a log scale for the frequency axis. The graph should start at 0.01fc and end at 100fc, and the vertical axis should range from 0 to 1. We can plot the calculated values on the graph and indicate the cutoff frequency at 253.30 Hz.

To know more about frequencies visit:

brainly.com/question/25867078

#SPJ4

Geometric series is the sum of an infinite number of terms that have a constant ratio between successive terms is1 1 1 0 0 0 0.

We first get the length of the input list xlst. If n is less than or equal to 2, we return 0 as the series can't be geometric. We then calculate the ratio r as the second element divided by the first element. We iterate through the list from the second element to the last element. For each element, we check if the ratio between the current and previous elements is equal to r. If it's not equal, we return 0 as the series can't be geometric. If we have checked all elements and found that all ratios are equal to r, we return 1 as the series is geometric.

Learn more about geometric here:

https://brainly.com/question/13008517

#SPJ4

The sentence "the long, meandering corridor is lit by rectangular skylights" is accurate because of this.

The comma rule is based on the distinction between coordinate adjectives and cumulative adjectives. Coordinate adjectives are adjectives that modify the noun directly after them. So, it is accurate to say that the long, winding corridor is lit by rectangular skylights. Islamic architecture commonly uses specific ornamental forms, like mathematically difficult, elaborate geometric patterns, floral motifs like the arabesque, and ornate calligraphic inscriptions, to decorate buildings and to reveal the function of the building through the choice of adornment. Another word that can be used in place of dome is cupola. It is an arch that has had its vertical axis twisted.

Learn more about Rectangular skylights here:

https://brainly.com/question/2358236

#SPJ4

The Ninja Foodi Smoothie Bowl Maker and Nutrient Extractor* with smartTORQUE is made to mix and cut through the stickiest ingredients quickly and without stalling. many bases on one base.

DIAL Select the chosen program using the dial, then press START or STOP to get started. IQ/MANUAL Select either Manual Mode or Auto-iQ Mode. If you want complete control over the blending speed and textures, choose manual. For heavy loads like dough, reduce the speed.

Fruits and vegetables are extracted to make drinks. Frozen fruits and vegetables are blended with yogurt or milk of your choice to make a smoothie. Spread makes it possible to create your own nut butters.

To know more about Ninja Foodi visit :-

https://brainly.com/question/29566101

#SPJ4

The mechanism (shown below) is initially at rest, then the length of a top cord is changed to bring a, b, and c to the same level. Every component moves uniformly.

In contrast to middle or end, initially refers to the period immediately following the start of a procedure or circumstance. The gales might not be as devastating as predicted, according to forecasters. They were initially cautious about Simon. Synonyms: initially, initially, initially, initially More beginning synonyms.

Briefing

Let spring K be constant

K= F/x = mg/x = (8kg)(9.81 m/s)/175 × 10⁻³m

= 448.46 N/m

The angular of spring's frequency is

w = √k/√m = √448.46/√8 = 7.49 rad/s

differential equation

y¹¹ + (7.49)²

y = 0

y¹¹ ₊ 56.1

where y = 0.

To know more about initially visit:

https://brainly.com/question/9959372

#SPJ4

            10(B)

          /      \

       7(R)      15(B)

      /   \       /   \

    6(B)  9(B)  13(R)  17(R)

           /        \

          8(R)      14(B)

This red-black tree has 10 nodes and is not an AVL tree. Because all of the pathways from the root to the leaves have the same number of black nodes and no red nodes are near to each other, this tree is a valid red-black tree. Also, the root and all of the leaves are black.

This tree is a valid red-black tree because it satisfies the following properties:

Every node is either red or black.

The root is black.

Every leaf (NULL) is black.

If a node is red, then both its children are black.

Every simple path from a node to a descendant leaf contains the same number of black nodes.

However, it is not an AVL tree because the balance factor of the node 7 is -2, and the balance factor of the node 15 is 2, violating the AVL balance property.

What is a red-black tree and how is it different from an AVL tree?

A red-black tree is a type of self-balancing binary search tree that is commonly used to store and retrieve data in computer programs. Like an AVL tree, a red-black tree ensures that the tree remains balanced and efficient, by adjusting the height and structure of nodes as necessary. However, a red-black tree is generally considered to be less rigid and more flexible than an AVL tree, and is better suited to handling dynamic data sets with frequent updates or changes. Additionally, a red-black tree uses a color-coding scheme to differentiate between nodes and determine their placement and balance, while an AVL tree uses a strictly defined balancing algorithm.

To know more about AVL tree visit:

brainly.com/question/12946457

#SPJ4

In a 0.11 m long tube holding N 2 and CO gases at a combined total pressure of 1.0 atm absolute, equimolar counter-diffusion is happening at steady state. At one end of N 2, the partial pressure is 80 mm Hg, while at the other, it is 10 mm Hg.

Equimolar counterdiffusion is a type of molecular diffusion that takes place in a binary mixture when an equal number of molecules from each material are travelling in the opposing directions. a combination with identical molar concentrations is said to be equimolar. Making a laminar jet of the liquid travel through a gas and calculating the rate of absorption allows one to calculate the diffusivity of a gas in a liquid. To test the diffusivities of components across the gel, agar solutions have been employed to create sphere-shaped gels.

To learn more about equimolar click on the link below:

brainly.com/question/28044054

#SPJ4

Data classification is the process of organizing data into categories or classes based on certain characteristics or properties.

Nominal, ordinal, interval, and ratio data classification are the four main categories.

1. Data that lacks a natural order is referred to as nominal data, and the categories are given names. Nominal information examples include gender, eye color, country of origin, and occupation. Nominal categorization divides data into categories that are mutually exclusive and lack any quantitative or numerical value.

2. Ordinal data classification: Named categories and a defined order are characteristics of ordinal data. Rating scales, satisfaction scores, and survey replies are a few examples of ordinal data. Data is ranked in a certain order or sequence when using ordinal classification.

3. Data with a predetermined sequence and variations between the numbers that have meaning are referred to as interval data. Interval data examples include temperature, time, and IQ levels. Data is measured on a scale with equal intervals for interval classification.

4. Data with a definite order, discrepancies between values that have significance, and a significant occurrence of zero are referred to as ratio data. Height, weight, distance, and the amount of time needed to perform a task are a few examples of ratio data. Data is measured on a scale with equal intervals and a real zero point when using ratio categorization.

According to question:

a. The time required to produce each tire on an assembly line - interval data

b. The number of quarts of milk a family drinks in a month - ratio data

c. The ranking of four machines in your plant after they have been designated as excellent, good, satisfactory, and poor - ordinal data

d. The telephone area code of clients in the United States - nominal data

e. The age of each of your employees - ratio data

f. The dollar sales at the local pizza shop each month - ratio data

g. An employee's identification number - nominal data

h. The response time of an emergency unit - interval data

To know more about Data Classification visit:

https://brainly.com/question/14619978

#SPJ4

Water won't flow out of the syphoning tube if the water level in the tank is lower than where the tube exits since there is no pressure differential to generate the flow.

About 78% of the gases in the Earth's atmosphere are nitrogen, 21% are oxygen, 0.9 % are argon, and 0.1 % are other gases. The remaining 0.1 percent of gases includes trace amounts of neon, water vapour, methane, carbon dioxide, and methane.

It not only protects us from harmful UV solar radiation but also gives us the oxygen we require to survive. Without it, our planet could not maintain the pressure required for liquid water to exist on its surface.

To know more about syphoning tube visit:-

https://brainly.com/question/23259679

#SPJ4

tank full of water is leaking at a regular rate for 30 minutes. The equation y=9x+500 gives the amount of water in the tank, the place y is the variety of liters and x is the variety of minutes considering that the tank started out to leak.

1. The charge of alternate of the volume, V, of water in a tank with recognize to time, t, is without delay proportional to the rectangular root of the volume.

The method for calculating leakage is [V * (P1 – P2) / (T * 14.7)] * 1.25. To preserve matters simple, let's imagine a 5-cubic-foot compressed air system. Starting at a hundred PSIG, it takes the machine 60 minutes to reach the stop stress of 50 PSIG.

Learn more about water leaking from a tank here;

https://brainly.com/question/3215631

#SPJ1

/bm/ /brm/ /ev/ is the name of a US brand of shaving cream that is applied to the face. The Burma-Vita Company promoted it on several tiny billboards along roadways between 1926 and 1963.

The Burma-Vita Company came up with a creative approach to promote its brushless shaving cream in the early days of automobiles. Only someone driving at 35 mph could understand the Burma-Shave billboards' funny serial jingles, which were far apart on the side of the road. Share: Syllables are repeated in rhyme, usually at the conclusion of a verse line. Typically, all sounds in rhymed syllables come after the last stressed syllable. One of the earliest literary elements we learn is rhyme, yet it may be challenging to use rhyme well.

To learn more about billboards click on the link below:

brainly.com/question/8956188

#SPJ4

The nine steps of the dilution streaking technique in the correct order:

What is dilution streaking technique ?

The dilution streaking technique is a laboratory method used to isolate pure cultures of bacteria from a mixture of microorganisms. The method involves diluting a bacterial suspension and streaking it onto a solid agar medium in a petri dish. The streaking process is repeated several times to create a series of intersecting streaks that are used to obtain individual colonies of bacteria.

The dilution streaking technique is used to:

Here are the nine steps of the dilution streaking technique in the correct order:

Note: Steps 1 to 6 should be done in a sterile environment to prevent contamination.

Learn more about dilution streaking technique click here:

https://brainly.com/question/14451524

#SPJ4

The ETW Electric Torque Wrench is a hand-held, electrically powered instrument without impact that is used to apply regulated torque. Simple buttons are included on the new POWERMASTER electronic series torque wrenches to increase or reduce the value.

To manage and apply a particular torque to a fastener, such as a bolt or nut, use a torque wrench. To maintain client safety, it is essential in general mechanics, tire-changing operations, and industrial maintenance and repair.

Because they have large screens that indicate the current torque measurement, digital torque wrenches have a significant advantage over other types of torque wrenches in terms of the accuracy of their scale.

To know more about Electric Torque visit:-

brainly.com/question/28965619

#SPJ4

F z = -1.367 N is the force component at A when theta is 30 degrees.

A moving object experiences friction that is perpendicular to and inversely proportional to the normal force. The amount of friction an object experiences depends on the sort of surface it touches. Friction is independent of the area of contact as long as there is a point oft.

The vector r A/B from point B to point A can be used to define the position of the follower. This vector comes from:

r_A/B = (r - z) i + sqrt(r^2 - (r - z)^2) j

where i and j are unit vectors in the x and y directions, respectively.

At theta = 30 degrees, we have:

r = 0.15 m

z = 0.02 cos(2 * 30) = 0.02 m

Substituting these values into the equation for r_A/B, we get:

r_A/B = (0.15 - 0.02 cos(60)) i + sqrt(0.15^2 - (0.15 - 0.02 cos(60))^2) j

= 0.129 i + 0.121 j

The velocity of the follower is the time derivative of its position, given by:

v_A/B = dr_A/B/dt

The derivative of the i-component is zero, since r and z are constants. The derivative of the j-component is:

dv_A/B,j/dt = d/dt[sqrt(0.15^2 - (0.15 - 0.02 cos(2 * theta))^2)]

Evaluating this derivative at theta = 30 degrees and the given rotational speed of 30 rad/s, we get:

dv_A/B,j/dt = -0.15 sin(60) d/dt[cos(2 * theta)] = 0.26 m/s

Therefore, the velocity of the follower at theta = 30 degrees is:

v_A/B = 0.26 j m/s

delta_W = F_z * delta_y

where delta_y is the virtual displacement in the j-direction.

The only force acting on the follower in the j-direction is the force of gravity, which has a magnitude of:

F_g = m * g = 0.5 kg * 9.81 m/s^2 = 4.905 N

The angle between the force of gravity and the j-axis is:

theta_g = arctan(r - z / sqrt(r^2 - (r - z)^2)) = 17.46 degrees

The component of the force of gravity in the j-direction is:

F_g,j = F_g * sin(theta_g) = 1.367 N

Since the follower is in static equilibrium, the force F_z must be equal and opposite to the force of gravity in the j-direction:

F_z = -F_g,j = -1.367 N

To know more about component visit:-

https://brainly.com/question/14612328

#SPJ4

The passage implies that in a design-build approach where project phases are running together at the same time, communication is essential for problem-solving. That is: "Communication needs to flow through defined channels." (Option C)

It stresses the importance of team members speaking up if problems arise, listening to others when they identify problems, and collaborating to solve issues as they occur.

The passage suggests that failure to address problems immediately with all team members involved could lead to coordination issues. It does not suggest that design-build projects suffer from a lack of clear leadership or that communication needs to flow through defined channels.

Learn more about Communication at:

https://brainly.com/question/28705567

#SPJ1

If the Spectrum modem's online indicator is blinking white and blue, it may be trying to connect to the internet or having trouble with connectivity.

Your gateway is undergoing its startup and registration process if the LED is blinking. If the indicator is off, the cable link is unavailable.

When the Spectrum router or modem blinks blue or white, an internet connection attempt is being made. The light turns a solid blue colour when the connection is successful. If it doesn't, though, there must be an issue or no internet connection.

To know more about spectrum visit:-

https://brainly.com/question/28035263

#SPJ4

Building design, age, and location are just a few of the variables that affect how much shaking California buildings can sustain from earthquake.

An earthquake is a sudden shaking of the earth's crust caused by the movement of geological materials beneath it.. The earthquakes begin at the tectonic plate boundary. The shifting of tectonic plates is what causes tectonic earthquakes.

Usually, sudden subsurface rock fracture and rapid movement along a fault cause earthquakes.. This sudden release of energy results in the seismic waves that shake the earth.

To know more about earthquake visit:-

https://brainly.com/question/17032464

#SPJ4

The modified insertion-sort procedure sorts the array A into monotonically decreasing order by sorting the elements in descending order.

To modify the insertion-sort procedure to sort into monotonically decreasing order, we need to change the comparison operator used in the while loop to sort the elements in descending order. The modified insertion-sort procedure can be written as follows:

for j = 2 to A.length:

key = A[j]

# Insert A[j] into the sorted sequence A[1 .. j−1] in descending order

i = j - 1

while i > 0 and A[i] < key:

A[i + 1] = A[i]

i = i - 1

A[i + 1] = key

In this modified procedure, the while loop checks if the element at index i is greater than the key value, rather than less than the key value as in the original insertion-sort procedure. If the element at index i is greater than the key value, it is shifted to the right to make space for the key, and the index i is decremented. This process continues until the correct position for the key value is found.

Learn more about loop :

https://brainly.com/question/30494342

#SPJ4