Answer: Equilibirum will shift towards left.
Explanation:
To determine addition of HCl will affect the equilibrium system, Analyze the equation and consider stoichiometry and Le Chatelier's principle.
Le Chatelier's principle states "if a system at equilibrium is subjected to a change, the system will respond in a way that minimizes the effect of that change".
Suppose the HCl is added the solution,then it will increase the concentration of hydrogen ions (H+) in the solution. And , this increase in H+ concentration will potentially shift the equilibrium of the reaction to either the left or the right, to minimize the effect
Suppose , if in a reaction the production of hydrogen ions (H+) is on the product side, then the increase in H+ concentration will shift the equilibrium towards left, favoring the formation of reactants.
Therefore the equilibrium will move towards the left .
Learn more about equilibrium here:
https://brainly.com/question/32275424?referrer=searchResults
#SPJ12
A reaction yields 0.00961 mol of O2 gas. What
volume will the gas occupy if it is collected at
34.0◦C and 0.922 atm pressure?
The gas will occupy 0.2624 L at 34.0 [tex]^oC[/tex] and 0.922 atm pressure.
Ideal gas problemFor an ideal gas:
PV = nRT
Where P is the pressure of the gas, V is the volume of the gas, R is the ideal gas constant, and T is the temperature in kelvin.
In this case:
P = 0.922 atm
V is what we are looking for
n = 0.00961 mol
R = 0.082 L atm.mol−1⋅K−1
T = 34 + 273 = 307 kelvin
Making V the subject of the formula:
V = nRT/P
= 0.00961 x 0.082 x 307/0.922
= 0.2624 L
In other words, the volume that the oxygen will occupy would be 0.2624 L.
More on the ideal gas can be found here: https://brainly.com/question/28257995
#SPJ1
The process in which a solution of known concentration is used to determine the concentration of an unknown solution is called what
The process in which a solution of known concentration is used to determine the concentration of an unknown solution is called titration
What is titration?Titration is a method used to determine the concentration of an unknown solution by measuring the volume of a solution of known concentration that is needed to react with a specific amount of the unknown solution.
There are different types of titrations, each with its own specific endpoint, depending on the type of reaction taking place. For example, acid-base titrations use an indicator to signal the endpoint, while redox titrations use an electrode or a color change to signal the endpoint.
Therefore, Titrations are commonly used in laboratories to determine the concentration of a wide variety of substances, such as acids, bases, and electrolytes in a solution. They are also used in industries such as food, pharmaceuticals and environmental analysis.
Learn more about titration from
https://brainly.com/question/15170788
#SPJ1
Classify the C- Cl bond in CCl4 as ionic, polar covalent or non-polar covalent. (EN: C-2.5, C-3,0)
A. ionic
B. polar covalent
C. nonpolar covalent
C. nonpolar covalent is the nature of C-Cl bond in the compound CCl4 having (Electronegativity: C-2.5, C-3,0).
A covalent bond is a chemical bond formed by the sharing of electrons between two atoms. The bond between C and Cl in CCl4 is a covalent bond. The electronegativity difference between C and Cl is small (EN C = 2.5 and EN Cl = 3.0), indicating that the bond is nonpolar covalent. In a nonpolar covalent bond, the electrons are shared equally between the atoms, and there is no separation of charge. The atoms have the same pull on the electrons, meaning that the electrons are shared equally between the atoms. In this case, the bond between C and Cl is nonpolar covalent because the electronegativity of C and Cl are similar, and the electrons are shared equally. Therefore, the bond is not polarized and there is no separation of charge. To sum up, C-Cl bond in CCl4 is not ionic and not polar covalent, it is a nonpolar covalent bond.
To know more about covalent bond click below:
https://brainly.com/question/10777799#
#SPJ4
"How many grams of NH3 can be produced from the reaction of 28 g of N2 and 25 g of H2?
N2 + 3H2 ---> 2NH3
==> 28 g N2 x (1 mol N2/14.0 g N2) x (2 mol NH3/1 mol N2) x ( 17.0 g NH3/ 1 mol NH3) = 68 g NH3
25 g H2 x ( 1mol H2/2.0 g H2) x (2 mol NH3/3 mol H2) x (17 g NH3/2 mol NH3) = 141.7 g NH3
So, 68 g NH3 can be produced because N2 is the limiting reactant and you will run out of it first.
To find how much excess reagent is left, we need to do the reaction backwards using the previous answer.
68 g NH3 x ( 1mol NH3/17.0 g NH3) x ( 3 mol H2/2 mol NH3) x ( 2.o g H2/1 mol H2) = 12 g H2
25-12=13 g H2 "
28 grams of N2 x (1 mol N2/14.0 grams of N2) x (2 mol NH3/1 mol N2) x (17.0 g NH3/ 1 mol NH3) = 68 grams NH3
25 g H2 x (1mol H2/2.0 g H2) x (2 mol NH3/3 mol H2) x (17 grams NH3/2 mol NH3) = 141.7 grams of NH3
So, 68 g NH3 can be produced because N2 is the limiting reactant, and you will run out of it first.
To find how much excess reagent is left, we need to do the reaction backward using the previous answer.
68 g NH3 x (1mol NH3/17.0 g NH3) x (3 mol H2/2 mol NH3) x (2.o g H2/1 mol H2) = 12 g H2
25-12=13 g H2 "
To know more about NH3:
https://brainly.com/question/16119085
#SPJ4
Transfer of lactase to pH 5 results in a substantial decrease in enzyme activity, likely due to the disruption of
The enzyme's secondary, tertiary, and quaternary structures are probably disrupted when lactase is transferred to pH 5, which causes a significant drop in enzyme activity.
Which one of these could lead to the denature of a protein?Protein denaturation can be brought on by a wide variety of substances and circumstances, including heat, chemical molecules, pH changes, and heavy metal ions.Lactase activity benefits from a pH of 6. The enzyme's secondary, tertiary, and quaternary structures are probably disrupted when lactase is transferred to pH 5, which causes a significant drop in enzyme activity.The enzyme's secondary, tertiary, and quaternary structures are probably disrupted when lactase is transferred to pH 5, which causes a significant drop in enzyme activity.To learn more about lactase refer to:
https://brainly.com/question/2945627
#SPJ4
What is the % yield if 4 moles of hydrogen is reacted with 3 moles of oxygen and produces 3 moles of water?
% yield if 4 moles of hydrogen react with 3 moles of oxygen to form 3 moles of water (H2 + 1/2 O2 -> H2O). a. 25%.
How many moles of H2O are produced from 3 moles of oxygen?That indicates that their mole ratio is one, making it simple to calculate how many moles of water H 20 there are. That will be equivalent to two times the amount of oxygen in moles. That is three multiplied. Thus, we have the quantity of H2 that is equal to six moles.Four moles of water will be created when four moles of hydrogen gas are burned in an environment with an abundance of oxygen.Multiply the molar mass of the product by the predicted moles per unit. The molar mass of HF, for instance, is 20 grammes. The theoretical yield is 80 grammes if 4 moles of HF are anticipated. Subtract the theoretical yield from the product's actual yield.To learn more about hydrogen refer to:
https://brainly.com/question/30242687
#SPJ4
How many molecules of O2 are in the container in problem 6? How many atoms of oxygen
The number of molecules or the number of atoms that the oxygen has has is 9.6 * 10^22 molecules/ atoms.
What is the number of molecules of oxygen present?We have to note that the number of the molecules of the oxygen that we have can be obtained by the use of the hypothesis that have been put forward by Avogadro.
We know that;
22.4 L of oxygen is contained in one mole of oxygen
3.5 L of oxygen would contain 3.5 * 1/22.4
= 0.16 moles of oxygen
If 1 mole of oxygen contains 6.02 * 10^23 molecules /atoms
0.16 moles of oxygen would contain 0.16 * 6.02 * 10^23/1
=9.6 * 10^22 molecules/ atoms
Learn more about volume of a gas:https://brainly.com/question/24189159
#SPJ1
Missing parts;
How many molecules of O2 are in a 3.5-liter container? How many atoms?
Identify the following reaction types as combustion, synthesis, decomposition, single displacement, or double displacement.
Answer: 1. Double replacement. 2. Combustion. 3. Single replacement. 4. Synthesis. 5. Decomposition
Explanation:
1. One of the parts of each of the reactants is swapped 2. Carbon dioxide and water are always produced in combustion. 3. One is swapped. 4. Two different things combine to make a single thing. 5. One single thing decomposes to make two different things.
6. What is the IUPAC name for the following compound? C(CH3)3 CH2CH(CH3)2
A. 3-t-butyl-5-isobutylnonanedioic acid
B. 3-isopropyl-4-isobutyloctanoic acid
C. 4-t-isopropyl-5-isobutylnonanedioic acid
D. 4-f-isopropyl-5-secbutylnonanedioic acid
The correct IUPAC name for the given compound is C. 4-t-isopropyl-5-isobutylnonanedioic acid.
What is a compound?A compound is a material that results from the chemical bonding of two or more elements. The elements contained in mixes are not chemically linked to one another.
Ionic and covalent bonds are the two most frequent forms of bonding that hold components together in compounds.
It is important to note that IUPAC nomenclature is a systematic method for naming organic compounds and it has a set of rules and guidelines to follow.
It is best to use a software or an online tool to get the IUPAC name of a compound as it can be complex and time-consuming task to do by hand.
To know more about compound visit:
https://brainly.com/question/13516179
#SPJ1
. A carbocation is all of the following, except
O a positively charged species.
O a reactive intermediate.
O an electrophile.
O a nucleophile.
A carbocation is all of the following, except a nucleophile.A carbocation is a positively charged species, a reactive intermediate, and an electrophile, but it is not a nucleophile.
Nucleophiles are species that donate electrons to form a new covalent bond, while electrophiles are species that accept electrons to form a new covalent bond. Carbocation have a positive charge and therefore it is an electrophile.A carbocation is a type of organic cation in which a carbon atom has a positive charge. Carbocations are formed by the removal of a leaving group from an organic molecule, such as an alkane, alkyl halide, or alkyne, creating a positively charged carbon atom. Carbocations are typically intermediate species in organic reactions and are highly reactive, as the positive charge on the carbon atom creates a high degree of electron deficiency.
Learn more about Carbocation here:
https://brainly.com/question/13164680
#SPJ4
How many moles of magnesium is 3.01 x 1022 formula units of magnesium?
Answer:
So 3.01 times 10 to the 22 atoms is 050 moles magnesium
Explanation:
hope this helps
draw the line-angle structural formula for cyclopropane
The line angle structure formula for cyclopropane is C3H6 or (CH2)3 with three methylene groups attached at the corner of a triangle.
The cycloalkane, cyclopropane has the chemical formula (CH2)3, and it is made up of three methylene groups (CH2) that are joined together to create a ring. The structure experiences significant ring strain as a result of the ring's modest size. The structure of cycloprane is depicted in the image attached.
A line-angle formula, also known as a skeletal structure, is even more condensed. In this formula, carbon atoms are implied at the corners and ends of lines, and each carbon atom is assumed to be connected to enough hydrogen atoms to give it four bonds. This is because carbon atom has a valency of four or it is a tetravalent atom.
To know more about organic structures, refer to the following link:
https://brainly.com/question/419650
#SPJ4
Is NADH the final electron acceptor?
No, isn't. NADH (nicotinamide adenine dinucleotide) is not the final electron acceptor in cellular respiration.
NADHIn the final stage of cellular respiration, the electron transport chain uses a series of electron carriers to transfer electrons from NADH and FADH2 to the final electron acceptor, which is oxygen (O2). The energy from these electrons is used to pump protons across a membrane, creating a proton gradient that drives the production of ATP through ATP synthase.
If you want to obtain the final electron acceptor in cellular respiration, you would need to provide an alternative electron acceptor in the electron transport chain. The most common final electron acceptors used in cellular respiration are oxygen (O2) in aerobes and non-oxygen compounds such as nitrate (NO3-), sulfur (S), or carbon dioxide (CO2) in anaerobes.
Learn more about NADH here:
https://brainly.com/question/14095785
#SPJ4
___is the transfer of heat through the movement of a fluid such as water or air.
Answer:
Convection
is the movement of heat by a fluid such as water or air. The fluid (liquid or gas) moves from one location to another, transferring heat along with it. This movement of a mass of heated water or air is called a current. Radiation is the transfer of heat by electromagnetic waves.
What type of cells are contained within the digestive tract lining?
The digestive tract lining is made up of a variety of different cell types.
These cells include absorptive cells, which absorb nutrients from the food we eat, goblet cells, which secrete mucus to protect the digestive tract, enteroendocrine cells, which produce hormones to regulate digestion, and brush border cells, which help break down food particles.
All of these cell types work together to ensure that the digestive process runs smoothly and efficiently.
The digestive tract is lined with a type of cell known as epithelial cells. These cells are responsible for protecting the internal organs in the digestive system, absorbing nutrients, and secreting digestive enzymes. Epithelial cells also help to regulate the passage of fluids and electrolytes in and out of the body.
To learn more about digestive, click here:
https://brainly.com/question/956634
#SPJ4
->>
16) Which of the following single-replacement reactions will result in NO REACTION?
A. Na(s) + Mg(NO3)2(aq)
B. Na(s) + Al(NO3)2(aq) ->
C. Na(s) + Cu(NO3)2(aq) ->>
D. Na(s) + Fe(NO3)2(aq) →>>
E. Na(s) + Ba(NO3)2(aq)
What is the Law of
Conservation of Mass?
A. The total mass of the products will always
be equal to the total mass of the reactants.
B. The total mass of the products will always
be more than the total mass of the reactants.
C. The total energy of the products will
always be equal to the total energy of the
reactants.
D. The total mass of the products will always
be less than the total mass of the reactants.
A gas at 110 °C exerts a pressure
of 225 torr in a sealed container.
The temperature drops to 65 °C.
What is the pressure of the gas at
the cooler temperature?
Answer:
The pressure of the gas when the temperature drops to 65°C is 133 Torr.
Explanation:
Guy-Lussacs lawThe Gay-Lussac law is a version of the ideal gas law in which the volume of the gas remains constant. A gas's pressure is exactly proportional to its temperature while its volume remains constant. The formula can be defined like this [tex]\frac{T1}{P1} = \frac{T2}{P2}[/tex].Answer BreakdownGiven informationThe gas is initially 110°C and has a pressure of 225 Torr.The temperature of the gas drops to 65°C and the question is asking us to find the pressure drop of the gas.Set up the proportionGiven the formula: [tex]\frac{T1}{P1} = \frac{T2}{P2}[/tex], T1 = 110°C & P1 = 225 TorrT2 = 65°C & P2 = ?[tex]\frac{110C}{225 Torr} = \frac{65C}{P2}[/tex]Cross-multiply, divide, and solve110°C X P2 = 225Torr x 65°C110°CP2 = 14,625P2= 132.95 which is best rounded off to 133 Torr.Please let me know if this helped!!!
Which type of soil can retain the greatest amount of water?One that has low permeabilityOne that has low porosityOne that has high permeabilityOne that has high porosity
The type of the soil that can retain the greatest amount of the water is the one that has high prosperity. The clay soil has retain the mor amount of the water.
The porosity means the space in between the soil particles, that will filled with air or the water. The clay soil has the large pore space , that means it can retain the greatest amount of the water. The clay soil has the greatest water holding capacity. The clay soil has the high porosity and least permeable.
Thus, the soil which can retain the greatest amount of the water is the soil with the high porosity.
To learn more about soil here
https://brainly.com/question/1023696
#SPJ4
The height of a cylinder with a radius of 4 cm is increasing at a rate of 2 centimeters per minute. Find the rate of change of the volume with respect to time when the height is 10 centimeters.
The rate of change of the volume with respect to time is 32π cm³/min. To find the rate of change of the volume with respect to time, we need to take the derivative of the volume function with respect to time, which is denoted by dV/dt.
The formula for the volume of a cylinder is V = πr²2h, where r is the radius and h is the height. To find the rate of change of the volume with respect to time, we need to find the derivative of V with respect to t.
Let's call h(t) the height of the cylinder at time t, so it is increasing at a rate of 2 cm/min.
dV/dt = d/dt (πr²h(t)) = πr²2 dh/dt = π(4²)(2) = 32π cm³/min
When the height is 10 cm, the rate of change of the volume with respect to time is 32π cm³/min.
Learn more about volume, here https://brainly.com/question/13338592
#SPJ4
Once the two atoms are bonded together, can you move the two atoms as a pair?
What causes a gas to effuse?
Effusion is said to happen when gas molecules escape into a vacuum through a pinhole.
One gas mixes with another during diffusion, typically through thermal random motion that causes collisions and releases molecular energy. The capacity of gas to pass through a small aperture is known as effusion. In chemistry, the phrases effusion and diffusion are frequently used to refer to two distinct properties of gases.
However, for many who are just beginning to learn about gases, studying the terminologies can get rather perplexing. Although they may have a similar sound, the phrases diffusion and effusion are completely different. They cannot be used interchangeably since they have different meanings.
Want to know more about effusion visit the link which is given below;
https://brainly.com/question/28320456
#SPJ4
78.1g of CO₂ gas are in a rigid 48.0L container at 0°C.
What is the pressure of the gas?
According to question the pressure of the gas is 4.45 atm.
Pressure is a physical force exerted on a surface by an object or a liquid. It is measured in units of force per unit area, such as pounds per square inch (psi) or pascals (Pa). Pressure is created when a force is applied to an object, causing it to compress or expand.
The pressure of the gas can be calculated using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
To calculate the pressure, we first need to calculate the number of moles of CO₂ gas in the container. We can do this by using the molar mass of CO₂, which is 44.01 g/mol.
n = (78.1 g CO₂) / (44.01 g/mol) = 1.77 mol
Now that we have the number of moles, we can calculate the pressure using the ideal gas law.
P = (1.77 mol)(0.0821 L·atm/K·mol)(273 K) / (48.0 L)
P = 4.45 atm
To learn more about pressure
https://brainly.com/question/24719118
#SPJ1
Match the appropriate benefit of dietary fiber intake to its associated disease. (Use each choice only once). Cardiovascular Disease A. Lowers Blood Cholesterol Hypertension B. Lowers Blood Pressure Type 2 Diabetes c. Decreases intestinal transit time and exposure to potential toxins Constipation D. Slows absorption of glucose Obesity E Slows rate of digestion, promotes satiety Colon Cancer F. Increases fecal bulk & promotes regularity
Cardiovascular diseases (CVDs) are the most common cause of death worldwide, claiming the lives of an estimated 17.9 million persons each year. CVDs are a group of heart and blood disorders.
How is blood made in the human body?The bone marrow produces stem cells, the building blocks that the body uses to make the different blood cells – red cells, white cells and platelets. The erythropoietin sends a message to the stem cells telling more of them to develop into red blood cells, rather than white cells or platelets.
What is in human blood?Whole blood is made up of red blood cells, white blood cells and platelets, all of which are suspended in a liquid called plasma. Whole blood and each of it's four components are all valuable tools in modern medicine.
To know more about blood visit:
https://brainly.com/question/30089368
#SPJ4
Balance the following equations
1. N2O5 -> N2O4 + O2
2. KNO3 -> KNO2 + O2
3. NH4NO2 -> N2 + H2O
4. O3 -> O2
5. Zn + AgCl -> ZnCl2 + Ag
6. NaOH + H2SO4 -> NA2SO4 + H2O
The following are the balanced chemical equations: 1). 2N2O5 -> 2N2O4 + 1O2, 2). 2KNO3 -> 2KNO2 + O2, 3). NH4NO2 -> N2 + 2H2O, 4).2O3 -> 3O2, 5). Zn + 2AgCl -> ZnCl2 + 2Ag, 6). 2NaOH + H2SO4 -> Na2SO4 + 2H2O.
Which five chemical equations are there?Synthesis, breakdown, single replacement, doubling replacement, and combustion are the five main categories of chemical reactions. One material is created from several reactants in a composition reaction.
What are class 10 chemical equations?A chemical equation is a symbol- and formula-based valid expression of a chemical reaction, with the reactant entities given on the left side and the resultant entities given on the right. Examples are NaOH+HClNaCl+H2O.
To know more about Equations visit:
https://brainly.com/question/25824281
#SPJ1
According to the bohr model of the atom, the single electron of a hydrogen atom circles the nucleus...a. in specific, allowed orbits.b. in one fixed orbit at all times.c. at any of an infinite number of distances, depending on its energy.d. counterclockwise.
Option C ; At any of an infinite number of distances, depending on its energy .
Bohr described the Hydrogen atoms in terms of an electron moving in a circular route about a nexus. He supposed that the electron was confined to certain pathways characterized by separate powers.It explains the emigration and absorption spreads of atomic hydrogen and hydrogen- suchlike ions with low atomic numbers. It was the first model to introduce the generality of a quantum number to describe atomic countries and to postulate quantization of electron pathways in the tittles. Bohr’s model is an important step in the development of quantum mechanics, which deals with multitudinous- electron particles. It was the first model to introduce the conception of a amount number to describe infinitesimal countries and to hypothecate quantization of electron routeways in the snippet. Bohr’s model is an important step in the development of amount mechanics, which deals with numerous- electron tittles.
Learn more about Bohr's model here:
https://brainly.com/question/10091720
#SPJ4
Circle the atom in each pair that has the greater electronegativity.
a) Ca Ga
b) Li O
c) C1 S
d) Br As
e) Ba Sr f) O S
Pair of each atom that has a greater electronegativity a) Ga, b) O, c) Cl, d) Br, e) Sr.
How can you determine which electronegativity is higher?On the periodic table, electronegativity generally increases as you move from left to right across a period and decreases as you move down a group. As a result, the most electronegative elements are found on the top right of the periodic table, while the least electronegative elements are found on the bottom left.
Why is electronegativity higher?The electrons with negative charges are drawn to the positive charge protons in the nucleus.The electronegativity / attraction will rise with the amount of protons present in the nucleus.
To know more about electronegativity visit:
brainly.com/question/17762711
#SPJ1
When you hold a textbook and a pencil, why does the textbook feel heavier than the pencil?
(1 point)
O You can grip the pencil with more strength.
O The textbook has a stronger attraction to Earth.
O The textbook has less mass than the pencil.
O Your hand repels the textbook with less force.
The textbook has a stronger attraction to Earth.
OPtion B is correct
How is speed related to gravity?As objects fall to the ground, gravity accelerates their descent. Acceleration is a change in velocity, while velocity is a measurement of the speed and direction of motion. Due to gravity, objects fall, and the further they fall, the faster they fall.
The pencil has a momentum greater than zero, whereas the textbook has zero momentum because it has no velocity.
Is gravity really nonexistent?Not having zero gravity
Contrary to common belief, there is no such thing as zero gravity. Weightlessness and zero gravity are two different ideas. The earth's gravity maintains the moon's orbit.
To discover more about Gravity,
go to
https://brainly.com/question/14874038
#SPJ1
A _____________ __________________ occurs at the coast of oceans and other large water bodies during sunny days
A sea breeze occurs at the coast of oceans and other large water bodies during sunny days.
Where does sea breeze occur?The term sea breeze defined as it describes a wind that blows from the ocean inland towards land. In daytime, the land surface heats up faster than the water surface.
The sea breeze occurs mostly in the spring and summer months because of the higher temperature differences between the ocean and nearby land, mostly in the afternoon when the land is at more heating from the sun.
Thus, A sea breeze occurs at the coast of oceans and other large water bodies during sunny days.
To learn more about sea breeze, follow the link;
https://brainly.com/question/13015619
#SPJ1
Humans process some foods by adding chemicals to reduce harmful bacterial growth. This allows foods to be edible for longer periods of time. Which best describes the advantages of food processing?.
According to the claim, one benefit of food processing is its capacity to lessen the growth of dangerous germs, which in turn prolongs the shelf life of food.
Thus, Extended Shelf Life: Perishable goods can have their shelf lives extended by using food processing procedures like canning, freezing, or adding preservatives. Customers may now preserve and enjoy these items for longer periods of time without worrying about them going bad.
Improved Food Safety: Food processing aids in lowering the risk of foodborne illnesses by employing chemicals and processing techniques that stop the growth of dangerous germs.
Thus, According to the claim, one benefit of food processing is its capacity to lessen the growth of dangerous germs, which in turn prolongs the shelf life of food.
Learn more about Food, refer to the link:
https://brainly.com/question/32109606
#SPJ12