I need answerrr plssss

Answer:

Step-by-step explanation:

no, it cannot be a triangle

all triangles add up to 180º

115.1+47.5+93= 255.6

255.6 doesn't equal 180, so no its not a triangle

The expression denominator is 1.

What is denominator?

In mathematics, a denominator is the lowest number in a fraction that indicates how many equal parts are divided into a whole. It is a fraction's divisor. In this case, the denominator is 4, thus there are four components overall.

Here the given is x-3+5

Now simplifying them

=> x-3+5 = x+2.

We know that the whole number or Integer always has 1 as Denominator. Then,

=> [tex]\frac{x-2}{1}[/tex]

Hence the denominator of the given is 1.

To learn more about denominator refer the below link

https://brainly.com/question/12099796

#SPJ1

Answer:

To graph this linear relationship, we can plot two points on a coordinate plane: (3,12) and (5,20). These points represent the number of hours Jen babysits (x-coordinate) and the amount of money she earns (y-coordinate).

We can connect these two points with a line to form a linear equation that represents the relationship between the number of hours babysat and the money earned.

The slope of this line can be found using the formula: (change in y) / (change in x) = (20-12) / (5-3) = 8/2 = 4

Therefore, Jen earns $4 per hour by babysitting.

It is important to note that this is a linear relationship, and the earnings are proportional to the number of hours babysat. This means that for any number of hours babysat, the earnings can be found by multiplying that number by $4.

Step-by-step explanation:

Answer: For every hour she babysits, she earns $4. ✅

Step-by-step explanation:

To graph the linear relationship, we can start by plotting two points: (3,12) and (5,20).

This represents that for 3 hours of babysitting, Jen earns $12, and for 5 hours of babysitting, she earns $20.

We can then use these points to find the slope of the line, which is the rate at which her earnings change as the number of hours increases.

The slope can be found by using the formula: (change in y) / (change in x) = (20 - 12) / (5 - 3) = 8/2 = 4

This means that for every hour she babysits, she earns $4.

So, the equation of the line is : y = 4x + b

Where b is the y-intercept, which can be found by substituting one of the points into the equation.

For example, by substituting (3,12) in the equation:

12 = 4(3) + b

b = 0

So, she earns per hour $4. ✅

the answer to this lovely amazing question would and should be 0.28

Step-by-step explanation:

.

The result of the addition of the polynomials is -15x^3 + 4x - 11.

We have to note that the polynomials have to do with those kind of functions in which the power of x in the equation may range form 1 to infinity. We have in the question that the expression can be written as;

(−6x^3 + 3 −4x) − (14 − 8x + 9x^3)

Then we have;

−6x^3 + 3 −4x - 14 + 8x - 9x^3

We can now collect the like terms as follows;

−6x^3 - 9x^3 −4x  + 8x + 3 - 14

-15x^3 + 4x - 11

Learn more about polynomials:https://brainly.com/question/11536910

#SPJ1

The solution of the compound inequality is -2 ≤ x ≤ 1 and -4 ≥ x ≥ -7.

An inequality that combines two other inequalities by using either "and" or "or" is referred to as a compound inequality. In certain cases, "and" won't be stated explicitly, but it is still understood. For instance, 1 x 3 simply means "x > 1 and x 3". However, a compound inequality using "or" is always explained in detail using "or." Compound inequalities may be divided into two categories: conjunction and disjunction.

The given compound inequality is:

1 ≤ | x + 3 | ≤ 4

As the equation contains a mod sign, we can write the inequality as follows:

1 ≤ x + 3 ≤ 4, and

1 ≤ - x - 3 ≤ 4

Simplify the first equation:

1 ≤ x + 3 ≤ 4

Subtract 3 from both the sides of the equation:

1 - 3 ≤ x + 3 - 3 ≤ 4 -3

-2 ≤ x ≤ 1

Simplify the second equation:

1 ≤ - x - 3 ≤ 4

Add 3 on both sides of the equation:

1 + 3 ≤ - x - 3 + 3≤ 4 + 3

4 ≤ -x ≤ 7

Convert the negative term to positive:

-4 ≥ x ≥ -7

Hence, the solution of the compound inequality is -2 ≤ x ≤ 1 and -4 ≥ x ≥ -7.

Learn more about compound inequality here:

https://brainly.com/question/20296065

#SPJ1

Answer:

The Answer is (D)

Step-by-step explanation:

When determining when a taxpayer wants to file as head, then the answer will become clearer when checking for their position on the house

Answer: C

Step-by-step explanation:

4x - 12y = -10

-3x + 10y = 10

In order to solve this using substitution method, you will have to

divide one equation by the coefficient of x or y

e.g. divide 4x-12y = -10 by 4 to get x-3y = -5/2

x = 3y-5/2

and substitute x for 3y-5/2 which is pretty complicated.

Not sure what you mean by "readily solved", though.

The ratio of these two figures would be for every 1cm in image A, in image B there are 2cm. So the ratio would be 1:2

The ratio is a mathematical term that refers to the quantified relationship between two magnitudes that reflects a proportion, that is, the ratio is the way of representing the proportion between two magnitudes. In this case, the ratio refers to the length of each side of these triangles and their relationship to each other.

According to the above, the ratio could be 1:2 because the larger triangle has lengths that are twice the lengths of the sides of the smaller triangle. For example, the left side of the small triangle is 6 cm, while the left side of the large triangle is 12 cm.

It's a proportionality relationship twice as big. Therefore, the ratio would be 1:2.

Learn more about ratio in: https://brainly.com/question/13419413

#SPJ1

Answer: the answer is -11

This statement is false. Two subspaces of R^n can have the same dimension but still be different.

Here are a few bullet points that elaborate on this:

Therefore, the statement "If s1 and s2 are subspaces of R^n of the same dimension, then s1 = s2" is not true in general.

Learn more about subspaces here:

https://brainly.com/question/13045843

#SPJ4

Answer:

---------------------------

Given is the parallelogram.

Area of a parallelogram:

Substitute the values and find the area:

On solving the provided question related to rectangle we can say that the Perimeter, P = 2(10+20); P = 60 cm

The formula for the perimeter of a rectangle is, P = length + breadth + length + breadth The perimeter of a shape is always calculated by adding up the length of each of the sides. To find the perimeter of a rectangle, we add the lengths of all four sides. Since opposite sides of a rectangle are always equal, we need to find the dimensions of length and width to find the perimeter of a rectangle. We can write the perimeter of the rectangle as twice the sum of its length and width.

In order to find the perimeter, or distance around the rectangle, we need to add up all four side lengths.

This can be done efficiently by simply adding the length and the width, and then multiplying this sum by two since there are two of each side length. Perimeter=(length+width)×2 is the formula for perimeter

here,

we have length, L = 10

and breadth, B = 20

Perimeter, P = 2(10+20)

P = 60 cm

To know more about Perimeter visit:

brainly.com/question/10452031

#SPJ1

Answer: 20%

Step-by-step explanation:

Im SOO sorry if i got it wrong but you make a porportion, it would look like this. 8.24/41.76 = x/100, were assuming x is the percent, we then do cross multiplication which would then look like. 41.76x=824. After this we want to seperate the variable so divide 41.76 on both sides.

Model B has a lower RMSE value on the hold-out set and therefore it is more likely to generalize well to new data.

The RMSE (root mean squared error) is a measure of the difference between the predicted values and the true values. A lower RMSE value indicates a better fit of the model to the data. In this case, it is not specified which model has a lower RMSE value on the training set or the hold-out set, but both models are considered to fit the data well.

To solve this question, we need to compare the RMSE values of both models on both the training and hold-out sets.

On the training set, Model A has a lower RMSE value of 0.8 compared to Model B's RMSE value of 0.9. This suggests that Model A is a better fit for the training data. However, it is important to note that a model that performs well on the training set may not necessarily perform well on new data.

On the hold-out set, Model B has a lower RMSE value of 1.1 compared to Model A's RMSE value of 1.2. This suggests that Model B is a better fit for the hold-out data.

The hold-out set is a good approximation of new data and therefore the performance of the model on the hold-out set is a good indicator of the model's performance on new data. Since Model B has a better performance on the hold-out set, it is more likely to generalize well to new data.

Learn more about RMSE here:

https://brainly.com/question/28331472

The complete question is:

Two different models were fit to the same time series using the first 100 time periods as the training set and the last 12 periods as a hold-out set. The RMSE values for each of the models on the training set are Model A: 0.8 and Model B: 0.9. The RMSE values for each of the models on the hold-out set are Model A: 1.2 and Model B: 1.1. Which model is more likely to generalize well to new data and why?

#SPJ4

Answer: 13

Step-by-step explanation: The number goes up by three each time, so it would be 13.

Answer:

The nᵗʰ term of the sequence is 3n - 2.

Step-by-step explanation:

[tex]\longrightarrow{\sf{a_n = a + (n - 1)d}}[/tex]

where :

Here we can see that the difference between two terms is 3.

Thus, finding the nth term of the sequence by substituting all the given values in the formula :

[tex]\longrightarrow{\sf{a_n = a + (n - 1)d}}[/tex]

[tex]\longrightarrow{\sf{a_n = 1 + (n - 1)3}}[/tex]

[tex]\longrightarrow{\sf{a_n = 1 + (n \times 3 - 1 \times 3)}}[/tex]

[tex]\longrightarrow{\sf{a_n = 1 +(3n - 3)}}[/tex]

[tex]\longrightarrow{\sf{a_n = 1 +3n - 3}}[/tex]

[tex]\longrightarrow{\sf{\underline{\underline{a_n = 3n - 2}}}}[/tex]

Hence, the nth term of the sequence is 3n - 2.

Answer:

To find the fraction of the total audience that were students or teachers, you need to add the fractions of students and teachers and simplify the result.

5/12 + 1/8 = (53) / (123) + (16) / (86) = 15/36 + 6/48 = 15/36 + 3/24 = 18/36 + 3/24 = (18+3) / (36+24) = 21/60

So 21/60 of the total audience were students or teachers.

Answer:
in attached image :)

Therefore , the solution of the given problem of surface area comes out to be 18 yd³  is needed to fill the garden with 4 inches of soil.

A measurement of how much space something occupies overall is its surface area. The surface area of a three-dimensional shape includes its whole surroundings. An object's surface area is its entire area. A cuboid's surface area is determined by summing the faces of all of its six oblong sides. The box's measurements could be determined using the formula below: 2lh, 2lw, & 2hw are the same as surface (SA). The whole area is represented by the three-dimensional shape's surface area.

Here,

Given  :

18 × 9 × = 54 ft² = 18 yd³

Thus,

The 4 inches of soil is made at the cubic yards soil .

So , it is correct

Therefore , the solution of the given problem of surface  area comes out to be 18 yd³  is needed to fill the garden with 4 inches of soil.

To know more about surface area visit:

https://brainly.com/question/2835293

#SPJ1

Therefore , the solution of the given problem of slope comes out to be the y-intercept value is 5.

A line's slope determines how steep it is. A gradient-based equation is referred to as having a gradient overflow. By dividing average horizontal difference (run) between 2 places by both the vertically change (rise) between those same two points, the slope is determined. The equation of a horizontal path is expressed as y = mx + b and is known as the hill form of an equation. The y-intercept of the line is located where the grade is m, b = b, and (0, b). In the case of the equations y = 3x - 7, the slope y y-intercept are (0, 7). The y-intercept is situated where the slope of the line is m and b is

Here,

Given :

that m=2, the point (x1,y1)=(— 3, —1)

Equation for the necessary straight line:

=>(y — y1)=m(x — x1)

=>y+1=2(x+3)

X=0 on the y-axis indicates that nothing is being measured.

=>y=2+3

The y-intercept value is 5.

Therefore , the solution of the given problem of slope comes out to be the y-intercept value is 5.

To know more about slope visit:

https://brainly.com/question/3605446

#SPJ1

Answer:

1,200 40×30=. h. h= hours

The given iterated integral is [tex]\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx[/tex]. The value of this integral is evaluated as 2/3.

The iterated integral is obtained by repeatedly integrating multivariate functions with a single variable each time. The given iterated integral is [tex]\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx[/tex]. This integral is evaluated in the following order [tex]\int dy[/tex], [tex]\int dz[/tex], and [tex]\int dx[/tex].

First, integrate the above expression with respect to y. Then, substitute the limit values, and we get,

[tex]\begin{aligned}\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx&=\int\limits^{\pi}_b\int\limits^1_0z\sin(x)\left[\int\limits^{\sqrt{1-z^2}}_0 \;dy\right]\;dz \;dx\\&=\int\limits^{\pi}_b\int\limits^1_0z\sin(x)[y]^{\sqrt{1-z^2}}_{0}\;dz \;dx\\&=\int\limits^{\pi}_b\int\limits^1_0z\sin(x)\left(\sqrt{1-z^2}\right)\;dz \;dx\end{aligned}[/tex]

Now, integrating with respect to z, we get,

[tex]\begin{aligned}\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx&=\int\limits^{\pi}_b\int\limits^1_0\sin(x)\;z\left(\sqrt{1-z^2}\right)\;dz \;dx\\&=-\frac{1}{2}\int\limits^{\pi}_b\sin x\left[\int\limits^1_0-2z\left(\sqrt{1-z^2}\right)\;dz\right]\;dx\end{aligned}[/tex]

Substitute, 1-z²=u and -2zdz=du in the above expression, and we get,

[tex]\begin{aligned}\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx&=-\frac{1}{2}\int\limits^{\pi}_b\sin x\left[\int\limits^0_1\left(\sqrt{u^2}\right)\;du\right]\;dx\\&=-\frac{1}{2}\int\limits^{\pi}_b\sin x\left[\frac {u^{3/2}}{3/2}\right]^0_1\;dx\\&=\frac{1}{3}\int\limits^{\pi}_b\sin x\left[u^{3/2}\right]^1_0\;dx\\&=\frac{1}{3}\int\limits^{\pi}_b\sin x\;dx\end{aligned}[/tex]

Finally, integrating with respect to x and we get,

[tex]\begin{aligned}\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx&=\frac{1}{3}\int\limits^{\pi}_b\sin x\;dx\\&=\frac{1}{3}[-(-1)-(-(1))]\\&=\frac{1}{3}[2]\\&=\frac{2}{3}\end{aligned}[/tex]

The required answer for the given integral is 2/3.

The complete question is -

Evaluate the iterated integral [tex]\int\limits^{\pi}_b\int\limits^1_0\int\limits^{\sqrt{1-z^2}}_0 z\sin(x)\;dy\;dz \;dx[/tex].

To know more about iterated integral:

https://brainly.com/question/27396591

#SPJ4

Let's review the information given to us to answer the question correctly this way:

     Juniors  Seniors   Totals

Yes       28         97          125

No       56         19           75

Totals   84        116          200

2. Find the probability of each of the events.

Let's recall that the formula of probability is:

P = Number of favorable outcomes/Total number of possible outcomes

A. P (a junior who did not attend prom)

P = Juniors who did not attend prom/Total number of students surveyed

P = 56/200

P = 7/25 (Diving by 8 numerator and denominator)

B. P (did not attend prom | senior)

P = Seniors who did not attend prom/Total number of seniors surveyed

P = 19/116

C. P (junior | attended prom)

P = Juniors who attend prom/Total number of students attended prom

P = 28/125

To learn more about fraction refer to:

https://brainly.com/question/17220365

#SPJ1

The average rate of change of the equation is 7

The average rate of change of an equation can be determine by using the formula below:

average rate of change = (f(x₂)- f(x₁)) / [x₂- x₁]

From the given information, f(x) = 2x²-5x-2 and x₁ = 2, x₂ = 4

average rate of change =  ([2(4)²-5(4)-2] - ([2(2)²-5(2)-2]) / (4- 2)

average rate of change = (10-(-4)) / 2

average rate of change = 14/2

average rate of change = 7

Learn more about average rate of change of equation on:

brainly.com/question/12363445

#SPJ1

The exact value of cos 105 degrees is (√3-1) / 2√2 .

What is Trigonometric Function ?

Trigonometric functions also are referred to as circular features can be really described as the capabilities of an angle of a triangle. It method that the relationship among the angles and facets of a triangle are given by using these trig capabilities. The fundamental trigonometric features are sine, cosine, tangent, cotangent, secant and cosecant.

So,

we know that ,

cos(A+B) = cosA cosB - sinA sinB

So,

cos(105) can be written as

cos(60+45 ) = cos60 cos 45  - sin60 sin45

= 1/2  *  1/√ 2  - √ 3 / 2 * 1/√2

=1/√2  *  (√3 - 1) / 2

=(√3-1) / 2√2 .

so the value of cos105 is (√3-1) / 2√2 .

Therefore , The exact value of cos 105 degrees is (√3-1) / 2√2 .

To learn more about Trigonometric Function from the given link.

https://brainly.com/question/15706158

#SPJ1

The maximum weight of objects which the container can hold as required is; 1.12 pounds.

As evident in the task content;

The maximum which the container can is able to hold is; 17.75 pounds.

However, there are two objects in the can in which case one weighs 6.53 pounds and the other weighs 10.1 pounds.

On this note, the total weight which the can can hold more is given as;

= 17.75 - 6.53 - 10.1

= 1.12 pounds.

Ultimately, the maximum weight which the container can hold more is; 1.12 pound.

Read more on subtraction;

https://brainly.com/question/220101

#SPJ1

Answer:

Step-by-step explanation:

180 - 110 = 70°

180 - 70 - 70 =

40°

Answer:

1. 26

2. x = 1.5

Step-by-step explanation:

1. C(0.7) means to plug in 0.7 into the equation

here, C(x) = 30x + 5. replace x with 0.7 to get

C(0.7) = 30*0.7 + 5= 26

2. C(x) = 30x + 5 = 50

30x+5 = 50

subtract 5 from both sides to isolate x and its coefficient

30x = 45

divide both sides by 30 to find x

x = 1.5

Answer:

0 on the left side

Step-by-step explanation: