I need help calculating the error % in molar mass

Answers

Answer 1
To calculate the error percentage in molar mass, you need to first determine the actual molar mass and the experimental molar mass. The error percentage is then calculated using the following formula:

Error % = |(experimental - actual) / actual| x 100%

For example, let's say the actual molar mass of a compound is 100 g/mol, and the experimental molar mass determined in the lab is 95 g/mol. The error percentage would be:

Error % = |(95 - 100) / 100| x 100%
Error % = |-0.05| x 100%
Error % = 5%

Therefore, the error percentage in molar mass is 5%

Related Questions

how to name Type 2 ionic compounds. AuCl3

Answers

To name Type 2 ionic compounds such as AuCl₃, you need to use the Stock system or Roman numeral system to indicate the oxidation state of the cation. Some steps are; Identify the cation, Determine the charge, Write the name, and combine two names.

Here are the steps to name AuCl₃; Identify the cation and anion. In this case, the cation is Au³⁺ and the anion is Cl⁻.

Determine the charge on the cation by using the anion's charge and balancing the charges to zero. Since Cl⁻ has a charge of -1 and there are three Cl⁻ ions in the compound, the total negative charge is -3. Therefore, the Au³⁺ ion has a charge of +3.

Write the name of the cation first, followed by the name of the anion with an -ide ending. Since the cation is Au³⁺, we use the name "gold(III)" to indicate the oxidation state of +3. The anion is Cl⁻, so we add the -ide ending to get "chloride".

Combine the two names to get the compound's name: "gold(III) chloride".

Therefore, the name of the Type 2 ionic compound AuCl₃ is "gold(III) chloride".

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ1

9. Which of the following gas laws is calculated with the pressure and
volume variables at a constant temperature?
Formula
4 points
P₁V₁ = P₂V₂
P₁ = first pressure
P2 = second pressure
V₁ = first volume

Answers

The gas law that is calculated with the pressure and volume variables at a constant temperature is Boyle's Law. Boyle's Law states that the pressure (P) of a gas is inversely proportional to its volume (V) when temperature (T) is held constant.

Mathematically, it is expressed as P₁V₁ = P₂V₂, where P₁ and V₁ represent the initial pressure and volume, and P₂ and V₂ represent the final pressure and volume.According to Boyle's Law, if the volume of a gas is reduced while keeping the temperature constant, the pressure will increase proportionally.

Similarly, if the volume is increased, the pressure will decrease. This relationship holds as long as the temperature remains constant throughout the process. Boyle's Law is one of the fundamental gas laws and provides insights into the behavior of gases under changing pressure and volume conditions at a constant temperature.

For more such questions on gas law

https://brainly.com/question/30233942

#SPJ11

Energy
4p
3d
4s
3p
3s
2p
2s
1s

Answers

Answer:

Energy

4p ⇵ ⇵ ⇵

3d ⇵ ⇵ ⇵ ⇵ ⇵

4s ⇵

3p ⇵ ⇵ ⇵

3s ⇵

2p ⇵ ⇵ ⇵

2s ⇵

1s  ⇵

An exothermic reaction releases 325 kJ. How much energy is this in calories

Answers

An exothermic reaction releases 325 kJ. 1359.8 kJ energy is this in calories.

An exothermic reaction is a chemical reaction that releases heat energy into the surroundings. During an exothermic reaction, the products of the reaction have less potential energy than the reactants, and the excess energy is released in the form of heat.

One calorie is defined as the amount of energy required to raise the temperature of one gram of water by one degree Celsius.

One joule is defined as the amount of energy required to apply a force of one newton over a distance of one meter.

1 cal = 4.184 J

1 cal = 0.004184 kJ

325000 cal = x kJ

0.004184/ 1 = x / 325000

x = 1359.8 kJ

Thus, 1359.8 kJ energy is this in calories.

To learn more about an exothermic reaction, follow the link;

brainly.com/question/10373907

#SPJ1

I need help solving this problem can anybody help thank you.

Answers

The system will react by changing the concentrations to restore equilibrium when the CO and CO2 concentrations in the chemical equation 2CO + O2 2CO2 are raised. The system will try to reduce the rise in CO and CO2 by moving the reaction towards the products side, in accordance with Le Chatelier's concept.

The reaction will go forward as the CO concentration rises, eating part of the extra CO and turning it into CO2. This change lowers the excess CO concentration and aids in reestablishing equilibrium.

However, since CO2 is already a product, its concentration does not have a direct impact on the reaction. However, to keep the stoichiometric balance, it can result in a somewhat greater concentration of CO.

Learn more about le chatlier principles at:

https://brainly.com/question/14967447

#SPJ1

1. Calculate the standard cell potentials from the standard free energy changes (you may find the values from available references) for the following fuel cells: (1) H₂/0₂, (ii) methanol/O₂, (iii) ethanol/O₂, and (iv) glucose/O₂. Assume that the fuels are completely oxidized and the products of the reactions are water for H₂/O₂ fuel cells, and carbon dioxide / water for the carbonaceous fuel/O₂ fuel cells.

Answers

We can use the following formula to determine the standard cell potential from standard free energy changes:

ΔG° = -nFE°

where

ΔG° is the standard free energy change,

n is the number of moles of electrons transferred in the balanced chemical equation,

F is Faraday's constant (96,485 C/mol), and

E° is the standard cell potential.

You can find the standard free energy change (G°) for a specified fuel cell in readily available references. These values ​​are listed:

1. Fuel cell for H2/O2: G° = -237.2 kJ/mol

The chemical formula is 2H2 + O2 -> 2H2O.

In this example, n is equal to 4 (transferring 4 moles of electrons).

After entering the values ​​into the formula, we get:

-4 * 96,485 C/mol * E°1 = -237.2 kJ/mol

As we solve for E°1, we get:

E°₁ ≈ 1.23 V

2. G° = -326.7 kJ/mol for a methanol/O2 fuel cell.

The balanced chemical formula is: CO2 + 2H2O = CH3OH + 1.5O2.

In this example, n is equal to 6 (transferring 6 moles of electrons).

After entering the values ​​into the formula, we get:

-6 * 96,485 C/mol * E°2 = -326.7 kJ/mol

As we solve for E°2, we get:

E ° ₂ ≈ 0.54 V

3. Fuel cell for ethanol and oxygen: G° = -329.6 kJ/mol

The chemical formula is: C2H5OH + 3O2 -> 2CO2 + 3H2O.

In this example, n is equal to 12 (12 electron moles are exchanged).

After entering the values ​​into the formula, we get:

-12 * 96,485 C/mol * E°3 = -329.6 kJ/mol

As we solve for E°3, we get:

E°₃ ≈ 0.27 V

4. Fuel cell for glucose and oxygen: G° = 2,840 kJ/mol

The chemical formula is C6H12O6 + 6O2 -> 6CO2 + 6H2O.

Since 24 moles of electrons are transported, n = 24 in this example.

After entering the values ​​into the formula, we get:

-24 * 96,485 C/mol * E°4 = 2,840 kJ/mol.

Solving for E°4, we get:

E°₄ ≈ 0.37 V

Learn more about chemical formula, here:

https://brainly.com/question/32018188

#SPJ1

Will you answer this ?

Answers

The mass (in grams) of carbon dioxide, CO₂ produced, given that 360 g of water vapor was produced from the reaction is 586.67 g

How do i determine the mass of carbon dioxide, CO₂ produced?

First, we shall obtain the mass of C₂H₆ that reacted to produce 360 g of water vapor, H₂O. This is obtain as follow:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 6 × 18 = 108 g Molar mass of C₂H₆ = 30 g/molMass of C₂H₆ from the balanced equation = 2 × 30 = 60 g

From the balanced equation above,

108 g of H₂O were obtained from 60 g of C₂H₆

Therefore,

360 g of H₂O will be obtain from = (360 × 60) / 108 = 200 g of C₂H₆

Thus, we can mass of C₂H₆ that reacted is 200 g

Finally, we shall obtain the mass of carbon dioxide, CO₂ produced. This is shown below:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

Molar mass of C₂H₆ = 30 g/molMass of C₂H₆ from the balanced equation = 2 × 30 = 60 gMolar mass of CO₂ = 44 g/molMass of CO₂ from the balanced equation = 4 × 44 = 176 g

From the balanced equation above,

60 g of C₂H₆ reacted to produce 176 g of CO₂

Therefore,

200 g of C₂H₆ will react to produce = (200 × 176) / 60 = 586.67 g of CO₂

Thus, the mass of carbon dioxide, CO₂ produced is 586.67 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

Question 4 of 10
In what way does the shape of a molecule affect how the molecule is
involved with living systems?
OA. It determines what elements are in the molecule.
OB. It determines oxidation states present in the molecule.
OC. It determines how the molecule functions.
OD. It determines the weight of the molecule.
SUBMIT

Answers

The shape of a molecule determines how the molecule functions.

Proton, Neutron and Electron of 23 13 Aluminum​

Answers

The atomic mass of Aluminum is 23, which means it has a total of 23 particles in its nucleus, including protons and neutrons.

Aluminum has an atomic number of 13, which means it has 13 protons in its nucleus.

To find the number of neutrons, we subtract the atomic number from the atomic mass. So, Aluminum has 23 - 13 = 10 neutrons in its nucleus. Electrons are the negatively charged particles that orbit around the nucleus of an atom.

Aluminum, being a neutral atom, has an equal number of electrons to the number of protons in its nucleus, which is 13. These electrons are distributed in different energy levels or shells around the nucleus.

Aluminum is a widely used metal in different applications due to its unique properties such as low density, high strength, and resistance to corrosion. It is used in the manufacturing of cans, foils, and aircraft parts. The number of protons and electrons determines the atomic number and chemical properties of an element. The number of neutrons affects the stability and isotopes of an element.

for more questions on atomic

https://brainly.com/question/30390726

#SPJ11

Is it beneficial or harmful to man or both? Discuss how it is beneficial or harmful to man?

Answers

The crystal I chose is sodium chloride crystals and it is beneficial for man as it is used in the preservation of food as well as in seasoning of food.

What are crystals?

A solid whose components are arranged in a highly ordered microscopic structure to form an all-pervasive crystal lattice is referred to as a crystal.

Sodium chloride also referred to as common salt is an ionic compound that has the chemical formula NaCl.

Sodium chloride is an essential nutrient employed in healthcare. It is employed as a spice to improve flavor and as a food preservative. Additionally, sodium chloride is employed in the production of plastics and other goods and is applied to de-ice sidewalks and roadways

Learn more about sodium chloride at: https://brainly.com/question/24878544

#SPJ1

Determine the [H+] , [OH−], and pOH of a solution with a pH of 7.41
at 25 °C. [H+]=

M

[OH−]=

M

pOH=

Answers

Answer:

Explanation:

H+ = 1 X 10^-7.41 = 3.89 X 10^ -8

POH = 14-7.41 = 6.59

OH- = 1 x 10 ^-6.59 = 2.57 X 10^ -7

The [H+] and [OH−] concentrations of the solution are approximately 2.38 × 10^(-7) M, and the pOH is 6.59.

The pH of a solution is a measure of the concentration of hydrogen ions ([H+]) in the solution. The pH scale ranges from 0 to 14, with a pH of 7 considered neutral. A pH of 7.41 indicates that the solution is slightly basic. To calculate the [H+], [OH−], and pOH of the solution, we can use the relationship:

pH + pOH = 14

Given that the pH is 7.41, we can subtract it from 14 to find the pOH:

pOH = 14 - 7.41 = 6.59

Since pH + pOH = 14, we can also determine the [OH−] by taking the antilogarithm of the pOH value:

[OH−] = 10^(-pOH)

[OH−] = 10^(-6.59)

[OH−] ≈ 2.38 × 10^(-7) M

Since the solution is neutral, the concentration of [H+] will be equal to the concentration of [OH−]:

[H+] = [OH−] ≈ 2.38 × 10^(-7) M

Therefore, the [H+] and [OH−] concentrations of the solution are approximately 2.38 × 10^(-7) M, and the pOH is 6.59.

For more question on concentrations

https://brainly.com/question/30766678

#SPJ11

What is the relationship between an elements position and it’s atomic mass in the periodic table

Answers

Answer:

The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number, or the number of protons in an atom's nucleus.

Explanation:

URGENT HELP!!!!


Which of the following experimental plans will test the effects of pressure on a reaction with gases and what is
the expected result?
A Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
B Keep pressure constant and increase the temperature of the reaction; reaction rate will decrease.
C Keep temperature constant and decrease the pressure of the reaction; reaction rate will increase.
D Keep pressure constant and decrease the temperature of the reaction; reaction rate will increase.

Answers

Answer:

A) Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

Explanation:

The temperature and pressure of a reaction will affect the rate of reaction.

Pressure

Pressure and the rate of reaction have a direct relationship. This means that as one increases, so does the other. So, if the pressure increases. then the rate of reaction will also increase. This is due to the number of collisions. As pressure increases, the number of collisions between molecules increases. This causes the reaction to occur faster. Thus, the rate of reaction increases.

Temperature

Kinetic energy and temperature are proportional. This means that as temperature increases, so does kinetic energy. This leads to temperature and rate of reaction also having a direct relationship. So, temperature and rate of reaction increase and decrease together. This is due to the fact that when temperature increases, the energy of the molecules increases. This leads to an increased number of collisions. As stated above, more collisions lead to a faster reaction.

Hi
Please help on question asap if the answer is correct I'll rate you five stars a thanks and maybe even brainliest!

What do you notice about the values?

0.9 amps ÷0.03v=30 ohms.
1.9amps÷0.07v=27.149 ohms
3.1. amps ÷0.10v =31 ohms
3.9. amps ÷ 0.12v =032.5 ohms
5. amps ÷0.15v=33.33 ohms
6.1. amps ÷0.19v=32.1053 ohms

Answers

Answer: The values you provided show that as the current (measured in amps) and voltage (measured in volts) increase, the resistance (measured in ohms) remains relatively constant.

Looking at the values, it appears that the current (in amps) divided by the voltage (in volts) yields resistance values (in ohms) that are relatively close to each other. The calculated resistance values range from approximately 27 ohms to 33 ohms, with some variation in between.

Which best explains why an Al 3+ ion is smaller than an Al atom?
In forming the Al³+ ion, the Al atom loses the electrons in its outermost energy
level, causing a decrease in the atomic radius.
In forming the Al3+ ion, the Al atom gains three protons and the resulting net
positive charge keeps the electrons more strongly attracted to the nucleus,
reducing the radius.
The Al3+ ion contains more electrons than the Al atom, which results in a greater
attraction for the nucleus and a smaller atomic radius.
In forming the A13+ ion, the Al atom adds electrons into a higher energy level,
causing a decrease in the atomic radius.
There are more protons in an Al3+ ion than there are in an Al atom.

Answers

In forming the Al³⁺ ion, the Al atom loses the electrons in its outermost energy level, causing a decrease in the atomic radius, hence option A is correct.

The number of protons in the nucleus of AlandAl3+ AlandAl3+ is the same, however there are differing numbers of electrons in the final shell. Al³⁺ is smaller than Al because it has fewer electrons.

The Al atom will become an Al³⁺ ion when it loses its third electron and develops a tri-positive charge on it. In forming the Al³⁺ ion, the Al atom loses the electrons in its outermost energy level, causing a decrease in the atomic radius.

Learn more about electrons, here:

https://brainly.com/question/30820925

#SPJ1

Complete the following table; If the pressure of the gas is 250 mmHg, Volume is
34mL and the temperature is at 25°C.

Answers

Answer:

Explanation:

constant = 33.43 ml  charles law; formula is v1/t1=v2/t2

129.77 mmhg= boyles law;  = p1v1=p2v2

659.51 K ; gay-lussac law; P1/T1=P2/T2

20.79 mL; combined gas law; p1v1/t1=p2v2/t2

90.67 mmHg; combined gas law; P1V1/T1=P2V2/T2

Why are some constellation and stars visible all year but others are only visible during specific times of the year?

Answers

As Earth makes its way around the sun (earth orbit) along a tilted path relative to its own axis we experience staggered views of different stars and constellations depending on where we find ourselves across our annual trajectory.

What is Earth's orbit around the sun?

The cycle of our planet traveling along an elliptical orbit around the sun provides us with what we know as a year or roughly 365.25 days of time measurement; however, this orbital path isn't uniformed and appears like a flattened circle with one focus positioned near our star - The Sun.

This causes changes in distance between both objects throughout different periods of time during its annual journey; for instance, early January denotes when we reach perihelion or our shortest distance from Sun while we hit aphelion on early July - marking our farthest measured distance from it.

Learn about earth's orbit here https://brainly.com/question/19520552

#SPJ1

in the quantum model of the atom , what does the shape of an atomic orbital represent ?

Answers

Answer:

In a quantum model of the atom, the shape of an electron orbital represents the probability distribution of finding an electron in a particular region of space around the nucleus of an atom. In other words, an electron orbital is a three-dimensional space around the nucleus where there is a high probability of finding an electron with a given energy level.

Different orbitals can have different shapes, such as spherical, hourglass-shaped, or more complex shapes.

Electron Orientations:

s = 1 orbital orientation

p = 3 orientations ([tex]6e^-[/tex])

d = 5 orientations ([tex]10e^-[/tex])

f = 7 orientations ([tex]14e^-[/tex])

1. Draw up schemes for the formation
of bonds between the atoms of the following
elements:
C and P; So; Mg u Si
2.
What kind of bond and type
of crystal
lattice
do you
follow me:
CaO, C, SiO2, Fe, K3N
Assume their physical
properties.
3. Specify which process
is depicted by the following diagram
(oxidation or reduction) and
make an electronic balance
corresponding to this scheme:
a) Cu0 -, Cu+2
b) S0
- S-2
B) Fe+3
Fe0
4. Make
up the redox reactions and
arrange the coefficients
by the electronic balance method:
A) H2O + CO2 - HCL +O2
b) Fe203 + H2 - Fe + H20
b) H2SO4 + S - SO2 + H2O

Answers

Schemes for the formation of bonds:

C and P; C + P → CPS; S + S → S₈Mg and Si: Mg + Si → Mg₂Si

How to setup schemes and bonds?

The schemes for the formation of bonds between the atoms of the following elements are:

Carbon and phosphorus:

C + P → CP

This is an example of a covalent bond, which is a type of bond that is formed by the sharing of electrons. In this case, the carbon atom shares one electron with the phosphorus atom, forming a single covalent bond.

Sulfur:

S + S → S₈

This is an example of a molecular bond, which is a type of bond that is formed by the sharing of electrons between multiple atoms of the same element. In this case, the sulfur atoms share two electrons each, forming a double bond.

Magnesium and silicon:

Mg + Si → Mg₂Si

This is an example of an ionic bond, which is a type of bond that is formed by the transfer of electrons from one atom to another. In this case, the magnesium atom gives up two electrons to the silicon atom, forming a magnesium ion with a charge of +2 and a silicon ion with a charge of -4. These ions are then attracted to each other by the opposite charges.

2. The types of bonds and crystal lattices for the following elements:

CaO: ionic bond, ionic lattice

C: covalent bond, diamond lattice

SiO₂: covalent bond, tetrahedral lattice

Fe: metallic bond, body-centered cubic lattice

K₃N: ionic bond, cubic lattice

3. The processes depicted by the following diagrams, along with the corresponding electronic balances:

Cu0 → Cu⁺²: oxidation

Cu0 → Cu⁺² + 2e⁻

S0⁻ → S⁻²: reduction

S0⁻- + 2e⁻ → S⁻²

Fe⁺³ → Fe⁺²: reduction

Fe⁺³ + 1e⁻ → Fe⁺²

4. The redox reactions and the coefficients arranged by the electronic balance method:

H₂O + CO₂ → HCL + O₂

2H⁺ + ¹/₂O₂ → HCL

2e⁻ + 2H⁺ → H₂

¹/₂O₂ + 2e⁻ → O₂⁻

Fe₂O₃ + H₂ → Fe + H₂O

Fe₂O₃ + 3H₂ → 2Fe + 3H₂O

3Fe⁺³ + 6e⁻ + 6H⁺ → 2Fe + 6H₂O

2O₂⁻ + 6H⁺ → 4H₂O

H₂SO₄ + S → SO₂ + H₂O

2H⁺ + SO₄²⁻ → SO₂ + H₂O

2e⁻ + 2H+ → H₂

S → S²⁻ + 2e⁻

Find out more on bond here: https://brainly.com/question/29282058

#SPJ1

How many moles of oxygen would be consumed to produce 68.1g water?

Answers

Answer:

To determine the number of moles of oxygen consumed to produce 68.1g of water, we need to know the amount of hydrogen in the water. Since water has two hydrogen atoms and one oxygen atom, the molar mass of water is 18.015 g/mol.

Using the molar mass of water, we can calculate the number of moles of water produced:

68.1 g ÷ 18.015 g/mol = 3.78 mol

Since there are two hydrogen atoms in each molecule of water, there must be twice as many moles of hydrogen as there are moles of water:

3.78 mol × 2 = 7.56 mol of hydrogen

Finally, we can use the balanced chemical equation for the reaction of hydrogen and oxygen to form water to determine the number of moles of oxygen consumed:

2H2 + O2 -> 2H2O

For every 1 mole of oxygen consumed, 2 moles of water are produced. Therefore, the number of moles of oxygen consumed is:

7.56 mol H2O ÷ 2 = 3.78 mol O2

So, 3.78 moles of oxygen would be consumed to produce 68.1g of water.

the relative formula masses (Mr) are: CaCo3 = 100; CaO =56 ; Co2=44

describe how this experiment could be used to provide evidence for the law of conservation of mass.

[6 marks]
include your answer:

-method

-which measurements should eb taken

-how the student could show evidence for the conservation for mass

Answers

The law of conservation of mass states that in a chemical reaction, the total mass of the reactants is equal to the total mass of the products. To provide evidence for this law, we can perform an experiment in which calcium carbonate ([tex]CaCO_3[/tex]) is decomposed to produce calcium oxide (CaO) and carbon dioxide ([tex]CO_2[/tex] ), and then measure the masses of the reactants and products.

Method:

Weigh a sample of [tex]CaCO_3[/tex] using a balance.

Heat the [tex]CaCO_3[/tex] in a crucible until it decomposes to CaO and [tex]CO_2[/tex]. The [tex]CO_2[/tex] gas will escape, leaving only CaO in the crucible.

Allow the crucible to cool and then weigh it again to determine the mass of the CaO produced.

Collect the [tex]CO_2[/tex] gas that is released during the reaction in a gas syringe or other collection device. Measure the volume of [tex]CO_2[/tex] gas produced, and calculate its mass using its molecular weight.

Which measurements should be taken:

The following measurements should be taken:

The mass of the [tex]CaCO_3[/tex] used as a reactant.

The mass of the CaO produced as a product.

The volume of [tex]CO_2[/tex] gas produced during the reaction.

The temperature and pressure of the [tex]CO_2[/tex] gas to allow for the calculation of its mass.

How the student could show evidence for the conservation of mass:

To show evidence for the law of conservation of mass, the student can compare the mass of the [tex]CaCO_3[/tex] used as a reactant to the total mass of the products, which includes the mass of CaO produced and the mass of [tex]CO_2[/tex] gas released.

The sum of the masses of CaO and [tex]CO_2[/tex] should be equal to the mass of the [tex]CaCO_3[/tex] used as a reactant, within experimental error. This will provide evidence that the mass of the reactants is conserved and equals the mass of the products, as required by the law of conservation of mass.

Additionally, the student could calculate the theoretical yield of CaO and CO2 based on the balanced equation for the reaction, and compare this to the actual yield obtained from the experiment. Any difference between the theoretical and actual yields could be due to experimental error, but the comparison can still provide additional evidence for the conservation of mass.

For more question on conservation of mass click on

https://brainly.com/question/27891057

#SPJ11

Will you answer this for me ?

Answers

Answer:

Explanation:

balance

2 C2H6 + 7  O2  --> 4 CO2 + 6 H2O

given 360 g H20 (g)

required =586.67 g CO2

360 g H20 x (1mole/18 g H20) X (4 mole CO2/6 moles H20) X (44g CO2/1mole) =586.67 g CO2

(b)
AU
(c)
MAT
w song will it take to deposit 10.47 grams of copper?
4) A voltaic cell consists of a copper electrode in a solution of copper(II) ions
and a palladium electrode in a solution of palladium(II) ions. The palladiu
is the cathode and its reduction potential is 0.951 V.
(a)
Write the half-reaction that occurs at the anode.
If E° is 0.609 V, what is the potential for the oxidation half-reaction
What is Keq for this reaction?
* LEA

Answers

a) The half-reaction that occurs at the anode is;

Cu(s) ----> Cu^2+(aq) + 2e

b) The Keq of the reaction is 3.75 * 10^20

What is the electrode potential?

Electrode potential is a measure of the tendency of an electrode to gain or lose electrons when it is in contact with a solution containing ions.

For the oxidation half reaction;

E° = Ecathode - Eanode

Eanode =  Ecathode - E°

Eanode = 0.951 -  0.609

= 0.342 V

Note that;

E° = 0.0592/nlogKeq

logKeq = E° * n/ 0.0592

= 0.609 * 2/0.0592

Keq =3.75 * 10^20

Learn more about electrode potential:https://brainly.com/question/17362810

#SPJ1

What is the energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H?

Substance Mass (u)
4He 4.00260
3H 3.01605
1H 1.00783

Answers

The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is -2.982 x 10⁻¹⁰ J.

The given masses of the isotopes can be converted to kilograms using the conversion factor: 1 u = 1.661 x 10⁻²⁷ kg.

Mass of 4He = 2.55 g = 2.55 x 10⁻³ kg

Mass of 3H = 3.01605 u = 3.01605 x 1.661 x 10⁻²⁷ kg/u

= 5.0099 x 10⁻²⁷ kg

Mass of 1H = 1.00783 u = 1.00783 x 1.661 x 10⁻²⁷ kg/u

= 1.6737 x 10⁻²⁷ kg

The balanced equation for the fusion reaction is;

3H + 1H → 4He

The molar mass of 4He is 4.0026 g/mol, which can be converted to kg/mol using the conversion factor: 1 g/mol = 1 x 10⁻³ kg/mol.

Molar mass of 4He = 4.0026 g/mol = 4.0026 x 10⁻³ kg/mol

The number of moles of 4He formed can be calculated from its mass;

n(4He) = m(4He) / M(4He)

= 2.55 x 10⁻³ kg / 4.0026 x 10⁻³ kg/mol

= 0.638 mol

From the balanced equation, 3 moles of H atoms react with 1 mole of He atoms to form 1 mole of He atoms. Therefore, the number of moles of H atoms required for the reaction is;

n(H) = 3/4 x n(4He)

= 3/4 x 0.638 mol

= 0.479 mol

The energy released in the reaction can be calculated using the mass-energy equivalence equation;

E = Δm c²

where Δm is change in mass, c is the speed of light.

The change in mass is;

Δm = [3H + 1H - 4He] = [5.0099 x 10⁻²⁷ kg + 1.6737 x 10⁻²⁷kg - 4.0026 x 10⁻³ kg]

= -3.315 x 10⁻²⁷ kg (negative because mass is lost in the reaction)

The energy released is;

E = (-3.315 x 10⁻²⁷ kg) c²

= (-3.315 x 10⁻²⁷ kg) (2.998 x 10⁸ m/s)²

= -2.982 x 10⁻¹⁰ J

The negative sign indicates that energy is released in the reaction (exothermic reaction).

Therefore, the energy associated is -2.982 x 10⁻¹⁰ J.

To know more about fusion here

https://brainly.com/question/16556922

#SPJ1

A 25 L sample of oxygen gas (O2) has a mass of 48 grams and a pressure of 3.0 atm. What would be the temperature of the sample? Reminder: Use the equation PV=nRT, with the constant R = 0.0821 L atm/mol K.
A.
609 K

B.
305 K

C.
19.0 K

D.
1.60 x 10-2 K

Answers

The temperature of the oxygen gas sample is 609 K, which is approximately 336°C or 637°F. The answer is A.

We can use the ideal gas law equation, PV = nRT, to solve for the temperature of the oxygen gas sample.

First, we need to calculate the number of moles of oxygen gas present in the sample using its mass and molar mass:

n = m/M

where:

n = number of moles

m = mass (in grams)

M = molar mass (in g/mol)

The molar mass of oxygen gas (O2) is 32.00 g/mol.

n = 48 g / 32.00 g/mol = 1.50 mol

Next, we can rearrange the ideal gas law equation to solve for temperature (T):

T = (PV) / (nR)

where:

T = temperature (in Kelvin)

P = pressure (in atm)

V = volume (in liters)

n = number of moles

R = gas constant (0.0821 L atm/mol K)

Plugging in the given values, we get:

T = (3.0 atm x 25 L) / (1.50 mol x 0.0821 L atm/mol K)

T = 609 K

For more question on temperature click on

https://brainly.com/question/4735135

#SPJ11

A rectangular ingot of gold is 23.7 cm long by 75.5 mm wide by 10.9 cm high. If 1.0 cm³ of gold weighs 19.30 g, what is the price of the ingot in SA Rand if the current price of gold is $1629.8 per ounce. (1oz = 28.35g Exchange rate = 9.6 R/$).​

Answers

The price of the ingot in South African Rand (SAR) is 19,533,171.507 R.

To calculate the price of the ingot in South African Rand (SAR), we need to follow these steps:

Convert the dimensions of the ingot to cm³:

Length = 23.7 cm

Width = 75.5 mm = 7.55 cm

Height = 10.9 cm

The volume of the ingot is calculated by multiplying these dimensions:

Volume = Length × Width × Height

= 23.7 cm × 7.55 cm × 10.9 cm

= 1830.0475 cm³

Calculate the weight of the ingot in grams:

Since 1 cm³ of gold weighs 19.30 g, we can multiply the volume of the ingot by this conversion factor to obtain the weight:

Weight = Volume × 19.30 g

= 1830.0475 cm³ × 19.30 g

= 35,380.1375 g

Convert the weight of the ingot to ounces:

Since 1 ounce is equal to 28.35 g, we can divide the weight of the ingot by this conversion factor:

Weight in ounces = Weight / 28.35 g

= 35,380.1375 g / 28.35 g

= 1247.0461 ounces

Calculate the price of the ingot in USD:

The current price of gold is $1629.8 per ounce, so we can multiply the weight of the ingot in ounces by this price:

Price in USD = Weight in ounces × Price per ounce

= 1247.0461 ounces × $1629.8/ounce

= $2,032,881.72278

Convert the price from USD to SAR:

The exchange rate is 9.6 R/$, so we can multiply the price in USD by this exchange rate:

Price in ZAR = Price in USD × Exchange rate = $2,032,881.72278 × 9.6 R/$ = 19,533,171.507 R

Therefore, the price of the ingot in South African Rand (SAR) is approximately 19,533,171.507 R.

know more about South African Rand here:

https://brainly.com/question/27565607

#SPJ11

Suppose you were doing a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0. Based on the indicator chart which pH indicator would be the best one to use. Describe the color change that would be observed

Answers

Based on the indicator chart, the pH indicator that would be the best one to use would be Thymol Blue.

The color change would be from light blue to yellow to orange.

Why is this pH indicator best ?

Thymol blue would be best because it would show you where your starting point is and then when you reach the desired pH value of 3. 0. Looking at the indicator chart, Thymol blue has a color of light blue between 8. 0 and 9. 0 so you will know you are at 8. 0 when the reaction starts.

As you add more acid, the color would move to yellow to let you know that it is getting more acidic. Once it reaches orange, the titration should stop.

Find out more on pH indicators at https://brainly.com/question/29584301

#SPJ1

7. A single molecule of nitrogen (N₂) will have a velocity of 400.0m/s.
(a) What equation & unit conversions will you use to calculate the
kinetic energy of one molecule?
(b) What is the kinetic energy of one molecule of nitrogen?

Answers

The kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s is approximately 3.72 x 10^-21 joules.

To calculate the kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s, we can use the equation for kinetic energy: KE = 1/2 * m * v², where KE represents the kinetic energy, m is the mass of the molecule, and v is the velocity.

(a) Unit conversions:

The mass of a nitrogen molecule (N₂) is approximately 28 atomic mass units (u) or 4.65 x 10^-26 kilograms (kg).

The given velocity is already in meters per second (m/s), so no further conversion is needed.

(b) Calculating the kinetic energy:

Plugging the values into the kinetic energy equation, we have:

KE = 1/2 * (4.65 x 10^-26 kg) * (400.0 m/s)²

Evaluating the expression:

KE = 1/2 * 4.65 x 10^-26 kg * 160000 m²/s²

= 3.72 x 10^-21 joules (J)

For more such questions on  kinetic energy

https://brainly.com/question/8101588

#SPJ11

if 3 moes of cl reacts with 3 moles oxygen, then which substance is the limitting reactant and excess reactant​

Answers

If 3 moles of cl reacts with 3 moles oxygen, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions.

To determine the limiting reactant and excess reactant, we need to compare the stoichiometry of the reaction to the given amounts of each reactant.

The balanced chemical equation for the reaction between chlorine (Cl2) and oxygen (O2) can be represented as follows:

2Cl2 + O2 → 2Cl2O

According to the balanced equation, it requires 2 moles of chlorine (Cl2) to react with 1 mole of oxygen (O2) to produce 2 moles of chlorine oxide (Cl2O).

Given that we have 3 moles of chlorine (Cl2) and 3 moles of oxygen (O2), we can determine the limiting reactant by comparing the ratio of moles between the two reactants.

The ratio of Cl2 to O2 required for complete reaction is 2:1. However, since we have equal amounts of Cl2 and O2 (both 3 moles), neither reactant is present in excess.

Therefore, in this scenario, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions. All of the chlorine and oxygen will be consumed in the reaction, resulting in the complete conversion to chlorine oxide (Cl2O).

It's important to note that if the amounts of Cl2 and O2 were different, the reactant present in lesser quantity would be the limiting reactant, and the reactant in greater quantity would be the excess reactant.

for more questions on reactant
https://brainly.com/question/30129541

#SPJ11

The bulbs used for fluorescent lights have a mercury gas pressure of 1.06 Pa at 40.°C. How many milligrams of liquid mercury must evaporate at 40.°C to yield this pressure in a 1.62-L fluorescent bulb?
____mg

Answers

The ideal gas law can be used to determine the pressure of mercury gas inside a fluorescent bulb:

PV = nRT

where

R is the gas constant,

n is the number of moles,

P is the pressure, V is the volume, and T is the temperature in Kelvin.

As we solve for n, we get:

n = pv / rt

Given the low pressure and moderate temperature, we can assume that mercury gas behaves better.

Therefore, the amount of mercury gas in the bulb is expressed as:

n = (1.06 Pa)(1.62 L)/(8.31 J/K/mol)(40 + 273.15 K) = [tex]7.71 * 10^-^4[/tex] mol

The molar mass of mercury can be used to determine how much liquid mercury is needed to produce this amount of gas:

m = nM

where M is the molar mass of mercury and m is its mass in mass units.

M = 200.59 g/mol

m = (7.71 x 10^-4 mol)(200.59 g/mol) = 0.154 g

Therefore, to achieve a pressure of 1.06 Pa, 154 mg of liquid mercury must evaporate at a temperature of 40 °C for a 1.62-L fluorescent light bulb.

Learn more about Gas Law, here:

https://brainly.com/question/12669509

#SPJ1

Other Questions
Question 8 (1 point)How many moles of Neon gas are there if 25. 0 Liters of the gas are at 278K and pressure of 89. 9 KPa (R= 8. 314)a) 5. 60 molb) 0. 85 molc) 0. 97 mold) 6. 50 mol the nave bayes method is a powerful tool for representing dependency structure in a graphical, explicit, and intuitive way.True or false Which of the following will happen after using a Linux Live CD/DVD, ejecting the media, and rebooting the system from the hard drive?A. The system will be just like it was before using the Live CD/DVD.B. The computer will be faster and perform better than before.C. The operating system will be permanently altered.D. The computer will be slower than before. For each of the following transactions, select the proper accounting entryThe inventory received on a purchase order was paid for within 20 days of the purchase. Payment terms on invoice were 2% 10, Net 30.1. DR A/C #20000 Accounts PayableCR A/C #10100 CheckingCR A/C #54599 Less Discounts Taken2. DR A/C #20000 Accounts PayableCR A/C #50100 Cost of Goods Sold nuclear pores restrict larger molecules from traversing the membrane due to their Which of the following is not true of the HKEY_CURRENT_USER hive in the Windows 10 registry?a. If you are attempting to fix a user-specific application issue, the support document will have you review and modify keys in this hive.b. Any application or operating system settings that are user specific are stored in this hive.c. It contains user-specific settings for the current user and system services.d. It contains the user-specific registry information from ntuser.dat stored in the user profile why the tension of the muscle fiber increases as the length increases, until it suddenly drops off and reaches 0 Distinguish key differences in morphology, function, and behavior between pre-Homo hominins and hominins in the genus Homo.Compare and contrast key differences in morphology, function, and behavior among species in the genus Homo. Use the information given about the angle theta, 0 le theta le 2pi, to find the exact value of the indicated trigonometric function. sin theta = 1/4, tan theta > o find cos theta/2. squareroot 10/4 squareroot 6/4 squareroot 8 + 2 squareroot 15/4 squareroot 8 1 2 squareroot 15/4 Find the exact value of the expression. 4. Complete the table to explain the arguments for and against U.S. imperialism in each category. (4points) of the three waves of government regulation, the ___ wave is the most politically contentious. write a formula for z(t) in terms of sinusoids in standard form, that is, z(t)= a0 k ak cos(kt k). How did children of higher socioeconomic status score on memorization tests, compared to children of lower socioeconomic status A department that incurs costs without directly generating revenues is a: A. Profit center B. Production center. C. Cost center D. Service center. A spiral is cell battery is a variation of what type ofbattery? ixx AM Manufacturing has a target debt?equity ratio of .45. Its cost of equity is 13 percent, and its cost of debt is 6 percent. If the tax rate is 35 percent, what is the companys WACC? For the function given below, find a formula for the Riemann sum obtained by dividing the interval [a,b] into n equal subintervals and using the right-hand endpoint for each . Then take a limit of this sum as to calculate the area under the curve over [a,b]. f(x)4x over the interval [1,5]. perhaps it is unsurprising that cyclohexane and ethanol are reasonable uv solvents, whereas toluene is not. explain why that is. Anton needs 2 boards to make one shelf one board is 890 cm long and the other is 28. 91 meters long what is the total length of the shelf current is flowing in a conducting metal wire the charges on average are typically moving parallel to the currentSelect the correct answerthe charges on average are typically moving parallel (same direction) to the current the charges on average are typically moving nowhere because the charges on average are at rest. the charges on average are typically moving perpendicular (at 90 degrees) to the current the charges on average are typically moving anti-parallel (opposite direction) to the current.