Identify the Lewis acid and Lewis base from among the reactants in each of the following equations. Match the words in the left column to the appropriate blanks in the sentences on the right. ► View Available Hint(s) Reset Help Fe3+ (aq) + 6NH3(aq) = Fe(NH3)6 (aq) : Fe3+ is the Lewis acid and NH3 is the Lewis base. AlBr3 + NH3 = H3NAIBr; : AlBr3 is the Lewis acid and NH3 is the Lewis base. F-(aq) + BF3(aq) = BF4- (aq) : F is the Lewis acid and BF3 is the Lewis base. Submit Previous Answers

Answers

Answer 1

Lewis acids are Fe3+, AlBr3 and F. Lewis bases are NH3 and BF3.

The Lewis acid and Lewis base from among the reactants in each of the given chemical equations are given below:

Fe3+ (aq) + 6NH3(aq) = Fe(NH3)6 (aq): Fe3+ is the Lewis acid and NH3 is the Lewis base.

AlBr3 + NH3 = H3NAIBr: AlBr3 is the Lewis acid and NH3 is the Lewis base.

F-(aq) + BF3(aq) = BF4- (aq): F is the Lewis acid and BF3 is the Lewis base.

A Lewis acid is a compound or a chemical species that can accept a pair of electrons from another compound or chemical species. A Lewis acid-base reaction involves an acid that accepts an electron pair from a base. The electron-pair acceptor is referred to as a Lewis acid because it is accepting electrons from another atom or molecule.

A Lewis base is a compound or a chemical species that can donate a pair of electrons to another compound or chemical species. The Lewis acid-base reaction is one in which a base donates a pair of electrons to an acid. The electron-pair donor is referred to as a Lewis base because it is donating electrons to another atom or molecule.

Learn more about Lewis acid and base: https://brainly.com/question/28299444

#SPJ11


Related Questions

Directions: Balance the following chemical equations. Descriptions of the equation, physical states, and atoms that are ions (have a
positive or negative charge) have absolutely no effect on balancing. The problems at the very end with a "**" are extremely difficult.
They are far more difficult thaN the problems that will appear on your test of final exam. Give them a try if you like a challenge or have
extra time in class
1) 2 C2H6(g) + 7 O2(g)  4 CO2(g) + 6 H2O(g)
2) 2 NaN3(s)  2 Na(s) + 3 N2(g)
3) 6 Na + Fe2O3  3 Na2O + 2 Fe
4) 3 Mg(s) + N2(g)  Mg3N2(s)
5) 2 Na + 2 NH3  2 NaNH2 + H2
6) Na2O + 2 CO2 + H2O  2 NaHCO3
7) P4S3(s) + 6 O2(g)  P4O6(g) + 3 SO2(g)
8) 2 Na3PO4 + 3 CaCl2  Ca3(PO4)2 + 6 NaCl
9) 2 C8H18(l) + 25 O2(g)  16 CO2(g) + 18 H2O(g)
10) C2H6O(l) + 3 O2(g)  2 CO2(g) + 3 H2O(g)
11) Pb(NO3)2 + 2 KI  PbI2 + 2 KNO3
12) 2 N2O5  4 NO2 + O2
13) 2 KClO3(s)  2 KCl(s) + 3 O2(g)
14) 2 CO(g) + O2(g)  2 CO2(g)
15) 2 C57H110O6(s) + 163 O2(g)  114 CO2(g) + 110 H2O(l)
16) 6 Na + 2 O2  2 Na2O + Na2O217) 2 Al + 3 H2SO4  Al2(SO4)3 + 3 H2
18) 2 C7H10N + 21 O2  14 CO2 + 10 H2O + 2 NO2
19) 2 Al(OH)3 + 3 H2SO4  Al2(SO4)3 + 6 H2O
20) 3 BaO + 14 Al  3 BaAl4 + Al2O3
21) 2 AgN3(s)  3 N2(g) + 2 Ag(s)
22) Pt + 4 HNO3 + 6 HCl  H2PtCl6 + 4 NO2 + 4 H2O
23) 2 LuCl3 + 3 Ca  2 Lu + 3 CaCl2
24) XeF6 + 3 H2O  XeO3 + 6 HF
25) Ba2XeO6 + 2 H2SO4  2 BaSO4 + 2 H2O + XeO4
26) P4O6 + 6 H2O  4 H3PO3
27) 2 C6H14(l) + 19 O2(g)  12 CO2(g) + 14 H2O(g)
28) 2 MoS2 + 7 O2  2 MoO3 + 4 SO2
**22) 2 K2MnF6 + 4 SbF5  4 KSbF6 + 2 MnF3 + F2
**23) S + 6 HNO3  H2SO4 + 6 NO2 + H2O
**24) 3 Cu + 8 HNO3  3 Cu(NO3)2 + 2 NO + 4 H2O
**25) CuS + 8 HNO3  CuSO4 + 8 NO2 + 4 H2O
**26) Cu2S + 12 HNO3  Cu(NO3)2 + CuSO4 + 10 NO2 + 6 H2O
**27) 5 NaBr + NaBrO3 + 3 H2SO4  3 Br2 + 3 Na2SO4 + 3 H2O
**28) 48 KNO3 + 5 C12H22O11  24 N2 + 36 CO2 + 55 H2O + 24 K2CO3

Answers

The chemical equations shown in the question are already balanced. It can be said to be balanced if the number of atoms of each element involved in the reaction is equal to the number of atoms of the same element in the product of the reaction.

The Balancing method

The Balancing method is used to balance chemical equations. Here are the steps involved in balancing chemical equations:

Step 1: First write down the unbalanced chemical equation.Step 2: Next, start balancing the elements that appear in the equation.Step 3: Begin by adding a coefficient to one of the elements on one side of the equation.Step 4: In order to balance the equation, the coefficient will then have to be added to other elements on the same side of the equation.Step 5: Finally, when the elements on the left and right sides of the equation are equal, then the equation is balanced.The equation is now balanced if the number of atoms of each element in the reactants is equal to the number of atoms of the same element in the products after balancing.

learn more about balanced chemical equations

https://brainly.com/question/26694427

#SPJ11

which of the following statements is the correct comparison of the midpoint and equivalence point rates of change of ph ph as a function of volume and its consequence for the careful determination of ph ph: the rate of change of ph ph vs. volume is greater at the midpoint than it is at the equivalence point leading to a greater uncertainty in the measurement of ph ph at the midpoint than at the equivalence point. the rate of change of ph ph vs. volume is greater at the equivalence point than it is at the midpoint leading to greater uncertainty in the measurement of ph ph at the equivalence point. the rate of change of ph ph vs. volume is greater at the midpoint than it is at the equivalence point leading to a greater uncertainty in the measurement of ph ph at the equivalence point than at the midpoint. the rate of change of ph ph vs. volume is greater at the equivalence point than it is at the midpoint leading to a greater uncertainty in the measurement of ph ph at the midpoint than at the equivalence point.

Answers

The statement "the rate of change of pH vs. volume is greater at the equivalence point than it is at the midpoint leading to greater uncertainty in the measurement of pH at the midpoint than at the equivalence point" is correct.

What is pH?

pH is a measure of the acidity or basicity (alkalinity) of a solution, which is determined by the concentration of hydrogen ions (H+) present in the solution. The pH scale ranges from 0 to 14, with a pH of 7 being neutral. A pH less than 7 indicates acidity, and a pH greater than 7 indicates basicity. The pH scale is logarithmic, meaning that a change of one unit represents a tenfold difference in acidity or basicity.

At the equivalence point, there is a rapid change in pH, whereas at the midpoint, the change in pH is not as drastic. This rapid change in pH at the equivalence point can lead to a greater uncertainty in the measurement of pH at the midpoint because it may be difficult to accurately determine the exact midpoint of the titration curve.

Learn more about pH from given link

https://brainly.com/question/172153

#SPJ1

What is/are the spectator ion(s) for the reaction of perchloric acid with sodium hydroxide? Select ALL of the spectator ions from the list below.a. Na+b. CO2c. O2d. Cl-

Answers

Sodium ion, Na+ and chloride ion, Cl- are the spectator ions of the reaction of perchloric acid with sodium hydroxide. Therefore, options a and d are correct.

What are spectator ions?

Spectator ions are ions that do not undergo a chemical reaction in a chemical equation, and they are in solution in their original form. The balanced chemical equation for the reaction of perchloric acid with sodium hydroxide is:

HClO4(aq) + NaOH(aq) → NaClO4(aq) + H2O(l)

In the reaction above, sodium hydroxide reacts with perchloric acid to form sodium perchlorate and water. During the reaction, H+ and OH- ions combine to form water (H2O) and cancel each other out. This makes them spectator ions. Also, sodium and chloride ions are already present in their original form before and after the reaction. They remain the same, which makes them spectator ions. CO2 and O2 are not spectator ions in this reaction; hence, they are incorrect as possible options in this question.

Learn more about spectator ions on:

https://brainly.com/question/29208113

#SPJ11

Structure of -a-D-maltose. Can someone help?

Answers

Answer:

-a-D-Maltose is a disaccharide composed of two glucose molecules linked together by a glycosidic bond. The two glucose molecules are linked together in an alpha-1,4-glycosidic bond, meaning that the anomeric carbon of the first glucose molecule is linked to the fourth carbon of the second glucose molecule. The two glucose molecules are also in the D-configuration, meaning that the hydroxyl group on the anomeric carbon of the first glucose molecule is on the right side when viewed from the bottom of the molecule.

Explanation:

please mark me brainliest

GIVING BRAINLIEST AND THANKS!
Can anyone help with this worksheet?

There are three mole equalities. They are: 1 mol = 6.02 x 1023 particles 1 mol = molar mass in g (periodic table) 1 mol = 22.4 L for a gas at STP

How many moles are there in 2750 ml of Hydrogen?


How many atoms are there in 27.8 L of Oxygen.?


How many atoms are in 0.62 mole of water?


Calculate the number of moles of hydrogen are in 1.7 x 1022atoms

Calculate the number of atoms in 2500 L of water

Calculate the mass of 2.5mol 2NH3



Given the following balanced chemical equation:
C5H12+8O2→5CO2+6H2O
How many moles of H2O can be formed if 0.0652 mol of C5H12 were to react?
Balance the following unbalanced equation and determine how many moles of H2O are produced when 1.65 mol of NH3 react:

NH3+O2→N2+H2O

8. How many moles of oxygen react with hydrogen to produce 27.6 mol of H2O
? Unbalanced: H2 + O2 → H2O balanced equation and solve.

9. If we have 3.59 mol of Fe2O3 , how many grams of SO3 can react with it?
Fe2O3 + 3SO3 —------> Fe2(SO4)3
1. How many moles of magnesium is 3.01 x 1022 atoms of magnesium?

2. How many molecules are there in 4.00 moles of glucose, C6H12O6
?
3. How many moles are 1.20 x 1025 atoms of phosphorous?

4. How many atoms are in 0.750 moles of zinc?
5. How many molecules are in 0.400 moles of N2O5?
Mole-Mass Conversions

1. How many moles in 28 grams of CO2?

2. What is the mass of 5 moles of Fe2O3 ?

3. Find the number of moles of argon in 452 g of argon.

4. Find the grams in 1.26 x 10-4 mol of HC2H3O2.

5. Find the mass in 2.6 mol of lithium bromide.

Mole-Volume Conversions

1. Determine the volume, in liters, occupied by 0.030 moles of a gas at STP.

2. How many moles of argon atoms are present in 11.2 L of argon gas at STP?

3. What is the volume of 0.05 mol of neon gas at STP?


Answers

There are 0.123 moles of Hydrogen in 2750 mL of Hydrogen; There are 1.51 x 10²⁴ Oxygen atoms in 27.8 L of Oxygen ; There are 1.11 x 10²⁴ atoms in 0.62 mole of water; There are 0.282 moles of hydrogen in 1.7 x 10²² atoms : There are approximately 2.02 x 10²⁶ atoms in 2500 L water.  mass of 2.5 mol of NH3 is 42.57 g.

What is a chemical equation?

Symbolic representation of chemical reaction in form of symbols and chemical formulas is called balanced chemical equation.

1 mol H2 = 22.4 L H2

x mol H2 = 2.75 L H2

x = 2.75 L H2 / 22.4 L H2

x = 0.123 mol H2

Therefore, there are 0.123 moles of Hydrogen in 2750 mL of Hydrogen.

1 mol O2 = 22.4 L O2

x mol O2 = 27.8 L O2

x = 27.8 L O2 / 22.4 L O2

x = 1.24 mol O2

1 mol O2 = 6.02 x 10²³ O2 molecules

1.24 mol O2 = 1.24 x 6.02 x 10²³ O2 molecules

1.24 mol O2 = 7.53 x 10²³ O2 molecules

7.53 x 10²³ O2 molecules x 2 atoms O per molecule = 1.51 x 10²⁴  Oxygen atoms

Therefore, there are 1.51 x 10²⁴ Oxygen atoms in 27.8 L of Oxygen.

As 1 mole H2O is 6.02 x 10²³ H2O molecules

and 1 H2O molecule=2 H atoms+1 O atom= 3 atoms

0.62 mol H2O x 6.02 x 10²³ H2O molecules/mol x 3 atoms/H2O molecule = 1.11 x 10²⁴  atoms

Therefore, there are 1.11 x 10²⁴  atoms in 0.62 mole of water.

1 mol H2= 6.02 x 10²³ H2 molecules

1.7 x 10²² H2 molecules / 6.02 x 10²³ H2 molecules per mole = x moles H2

x =0.282 mol H2

Therefore, there are 0.282 moles of hydrogen in 1.7 x 10²² atoms.

2500 L of water / 22.4 L/mol = 111.6 mol of water

111.6 mol of water x 6.02 x 10²³ molecules/mol = 6.72 x 10²⁵ molecules of water

6.72 x 10²⁵ molecules of water x 3 atoms/molecule = 2.02 x 10²⁶ atoms of hydrogen and oxygen in 2500 L water.

Therefore, there are approximately 2.02 x 10²⁶ atoms in 2500 L water.

As, mass is number of moles x molar mass

= 2.5 mol NH3 x 17.03 g/mol NH3

mass = 42.57 g

Therefore, mass of 2.5 mol of NH3 is 42.57 g.

C5H12 + 8O2 → 5CO2 + 6H2O

0.0652 mol C5H12 x 6 mol H2O/1 mol C5H12 = 0.3912 mol H2O

And therefore, 0.3912 mol H2O is formed if 0.0652 mol of C5H12 react.

Balance equation: NH3 + 2O2 → N2 + 3H2O

1.65 mol NH3 x 3 mol H2O/1 mol NH3 = 4.95 mol H2O

Therefore, 4.95 mol of H2O are produced when 1.65 mol of NH3 reacts.

From balanced equation: 2H2 + O2 → 2H2O

So, 27.6 mol H2Ox 1 mol O2/2 mol H2O=13.8 mol O2

Therefore, 13.8 mol of O2 react with hydrogen to produce 27.6 mol of H2O.

Using balanced equation: Fe2O3 + 3SO3 → Fe2(SO4)3

3.59 mol Fe2O3 x 3 mol SO3/1 mol Fe2O3 = 10.77 mol SO3

10.77 mol SO3 x 80.06 g/mol = 862.6 g SO3

Therefore, 862.6 g of SO3 can react with 3.59 mol of Fe2O3.

3.01 x 10²² atoms of Mg / 6.02 x 10^23 atoms/mol = 0.050 mol of Mg

Therefore, 3.01 x 10^22 atoms of Mg is equal to 0.050 mol of Mg.

1 mol of glucose (C6H12O6) = 6.02 x 10²³ molecules

Therefore: 4.00 mol of glucose x 6.02 x 10²³ molecules/mol = 2.41 x 10²⁴  molecules of glucose

Therefore, there are 2.41 x 10²⁴  molecules in 4.00 moles of glucose.

1 mol of phosphorous = 6.02 x 10²³  atoms

Therefore: 1.20 x 10²⁵ atoms of phosphorous / 6.02 x 10²³  atoms/mol = 19.9 mol of phosphorous

Therefore, 1.20 x 10²⁵ atoms of phosphorous is equal to 19.9 mol of phosphorous.

1 mol of zinc = 6.02 x 10²³  atoms

Therefore: 0.750 mol of zinc x 6.02 x 10²³ atoms/mol = 4.52 x 10²³ atoms of zinc

Therefore, there are 4.52 x 10²³  atoms in 0.750 moles of zinc.

1 mol of N2O5 = 6.02 x 10²³  molecules

Therefore: 0.400 mol of N2O5 x 6.02 x 10²³ molecules/mol = 2.41 x 10²³ molecules of N2O5

Therefore, there are 2.41 x 10²³ molecules in 0.400 moles of N2O5.

Molar mass of CO2 is 12.01 + 2(16.00) = 44.01 g/mol.

moles = mass/molar mass = 28 g/44.01 g/mol = 0.636 mol

Therefore, there are 0.636 moles in 28 grams of CO2.

Molar mass of Fe2O3 is 2(55.85) + 3(16.00) = 159.69 g/mol.

mass = moles x molar mass = 5 mol x 159.69 g/mol = 798.45 g

Therefore, mass of 5 moles of Fe2O3 is 798.45 grams.

Molar mass of Ar is 39.95 g/mol.

moles = mass/molar mass = 452 g/39.95 g/mol = 11.3 mol

Therefore, there are 11.3 moles of Ar in 452 grams of Ar.

Molar mass of HC2H3O2 is 1(1.01) + 2(12.01) + 2(1.01) + 2(16.00) = 60.05 g/mol.

mass = moles x molar mass = 1.26 x 10⁻⁴ mol x 60.05 g/mol = 0.00756 g

Therefore, there are 0.00756 grams in 1.26 x 10⁻⁴ mol of HC2H3O2.

Molar mass of LiBr is 6.94 + 79.90 = 86.84 g/mol.

mass = moles x molar mass = 2.6 mol x 86.84 g/mol = 225.784 g

Therefore, mass in 2.6 mol of LiBr is 225.784 grams.

volume = moles x 22.4 L/mol = 0.030 mol x 22.4 L/mol = 0.672 L

Therefore, 0.030 moles of a gas at STP occupies volume of 0.672 liters.

moles = volume/22.4 L/mol = 11.2 L/22.4 L/mol = 0.5 mol

Therefore, 0.5 moles of argon atoms present in 11.2 L of argon gas at STP.

Therefore, to find volume of 0.05 mol of neon gas at STP:

volume = moles x 22.4 L/mol = 0.05 mol x 22.4 L/mol = 1.12 L

Therefore, 0.05 mol of neon gas at STP occupies volume of 1.12 liters.

To know more about balanced chemical equation, refer

https://brainly.com/question/11904811

#SPJ1

which of the following could be added to a solution of sodium acetate to produce a buffer?group of answer choiceshydrochloric acid onlypotassium acetate onlyacetic acid or hydrochloric acidacetic acid only

Answers

Adding either hydrochloric acid or acetic acid to a solution of sodium acetate can produce a buffer. The chemical equation for the reaction between sodium acetate and hydrochloric acid is NaAc + HCl → NaCl + HAc, and for the reaction between sodium acetate and acetic acid is NaAc + HAc → NaCl + AcOH.
Sodium acetate can be used to make buffer solutions. A buffer is a solution that resists changes in pH when an acid or base is added. The two most important components of a buffer are a weak acid and its corresponding conjugate base. Acetic acid and sodium acetate are two such components that can be used to create a buffer. As a result, the answer to the question is acetic acid. Hence, option (c) acetic acid or hydrochloric acid is correct. Therefore, adding acetic acid to a sodium acetate solution would produce a buffer. The buffer solution can withstand pH changes when hydrochloric acid is added. Since hydrochloric acid is a strong acid, it ionizes completely in the solution and lowers the pH significantly. Acetic acid is a weak acid, on the other hand. It ionizes partially in solution, resulting in a small decrease in pH. When hydrochloric acid is added to the acetic acid-sodium acetate buffer, the additional hydrogen ions react with the buffer's acetate ion to form more acetic acid, which consumes the hydrogen ions and prevents a drastic decrease in pH. This is how a buffer works.

For more information follow this link: https://brainly.com/question/22821585

#SPJ11

Consider the reaction NH4HS(s) ? NH3(g) + H2S(g)At a certain temperature, Kc = 8.5x10-3. A reaction mixture at this temperature containing solid NH4HS has [NH3] = 0.166 M and [H2S] 0.166 M. Will more of the solid form or will some of the existing solid decompose as equilibrium is reached?

Answers

The given equilibrium reaction is: NH4HS(s) ⇌ NH3(g) + H2S(g)

What is equilibrium reaction?

An equilibrium reaction is a reversible chemical reaction in which the forward and backward reactions occur at equal rates. At equilibrium, the concentrations of the reactants and products remain constant, and the rate of the forward reaction is equal to the rate of the backward reaction. In other words, the system is in a state of dynamic balance, where the concentrations of the reactants and products do not change over time.

The equilibrium constant, Kc, is given as 8.5 x 10^-3 at a certain temperature. At equilibrium, the concentrations of NH3 and H2S are given as [NH3] = 0.166 M and [H2S] = 0.166 M. We are asked to determine whether more of the solid NH4HS will form or whether some of the existing solid will decompose to reach equilibrium.

To solve this problem, we can first use the equilibrium constant expression to calculate the equilibrium concentration of NH4HS:

Kc = ([NH3] x [H2S]) / [NH4HS]

8.5 x 10^-3 = (0.166 M x 0.166 M) / [NH4HS]

[NH4HS] = (0.166 M x 0.166 M) / 8.5 x 10^-3

[NH4HS] = 3.25 M

The calculated concentration of NH4HS at equilibrium is 3.25 M, which is greater than the initial concentration of NH4HS. This indicates that more of the solid NH4HS will dissolve to form NH3 and H2S, rather than some of the existing solid decomposing. Therefore, the system will shift towards the product side to consume more NH4HS and form additional NH3 and H2S.

To know more about chemical compound visit :-

https://brainly.com/question/26487468

#SPJ1

When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are: H2S (g) + O2 (g) H2O (l) + SO2 (g)

Answers

The balanced molecular equation for

H₂S (g) + O₂ (g) ⟶ H₂O (l) + SO₂ (g)   is given by:

2H₂S (g) + 3O₂ (g) ⟶ 2H₂O (l) + 2SO₂ (g).

The equation is to be balanced, and it must obey the law of conservation of mass, which states that the number of atoms on the reactants' side must be equal to the number of atoms on the products' side.

To balance the equation for H₂S (g) + O₂ (g) ⟶ H₂O (l) + SO₂ (g), let us consider sulfur first. On the reactant side, there is one sulfur atom, but there are two sulfur atoms on the product side. To equalize the number of sulfur atoms, a coefficient of two must be placed in front of H₂S:H₂S (g) + O₂ (g) ⟶ 2H₂O (l) + SO₂ (g)

Now we'll count oxygen atoms. There are two oxygen atoms in H₂S and three oxygen atoms in O₂, bringing the total to five. There are four oxygen atoms in H₂O and two in SO₂, for a total of six. The oxygen atoms are not balanced. We must add one more O₂ to the reactant side to equalize the number of oxygen atoms:

2H₂S (g) + 3O₂ (g) ⟶ 2H₂O (l) + 2SO₂ (g)

The molecular equation is now balanced with

2H₂S (g) + 3O₂ (g) ⟶ 2H₂O (l) + 2SO₂ (g)

To learn more about "balanced molecular equation", visit: https://brainly.com/question/11904811

#SPJ11

What is the most flammable element in the periodic table?
A. fluoride
B. sulfur
C. uranium
D. hydrogen

Answers

Hydrogen
Reason; The most combustible element is hydrogen. It occurs as a diatomic molecule but in the presence of an oxidizer like oxygen, the covalent bond between the hydrogen atoms break and it then reacts with oxygen to give water molecules. Being an exothermic reaction, it releases enough heat to cause more dissociation of
H
2
molecules resulting in a chain reaction.

for 280.0 ml of a buffer solution that is 0.225 m in hcho2 and 0.300 m in kcho2, calculate the initial ph and the final ph after adding 0.028 mol of n

Answers

The amount of salt in the buffer solution will rise by 0.028 mol since the added Na is a salt. The amount of acid present won't alter. Consequently, the finished pH of the As a result, the buffer solution's final pH may be determined as follows: pH = 4.74 + log((0.300 + 0.028)/0.225) = 5.11.

The Henderson-Hasselbalch equation, which asserts that pH = pKa + log([salt]/[acid]), may be used to determine the initial pH of a buffer solution. HCHO2 and KCHO2 have pKas of 4.74 and 9.31, respectively. Consequently, the following formula may be used to determine the buffer solution's starting pH: pH = 4.74 + log(0.300/0.225) = 4.98.

The buffer solution will become more basic as a result of the addition of hydroxide ions after adding 0.028 mol of Na. With the revised salt and acid concentrations, the Henderson-Hasselbalch equation may still be used to determine the buffer solution's ultimate pH.

Learn more about buffer solution  at:

https://brainly.com/question/31367305

#SPJ12

Calculate the mass of sodium chloride required to prepare a 100cm^3 of 1.00 mol dm^-3 sodium chloride solution.( The molar mass of sodium Chloride is 58.5gmol^-1)​

Answers

Answer:

To prepare a 1.00 mol dm^-3 sodium chloride solution, we need to dissolve one mole of sodium chloride in one liter of solution (1000 cm^3).

However, we only need to prepare 100 cm^3 of the solution, which is 1/10 of a liter. So we need to dissolve:

1/10 * 1.00 mol = 0.100 mol

of sodium chloride in 100 cm^3 of solution.

The molar mass of sodium chloride is 58.5 g/mol. So to calculate the mass of sodium chloride required, we can use:

mass = number of moles x molar mass

mass = 0.100 mol x 58.5 g/mol

mass = 5.85 g

Therefore, we need 5.85 g of sodium chloride to prepare 100 cm^3 of 1.00 mol dm^-3 sodium chloride solution.

we expected that the acetylsalicylic acid would be converted to salicylic acid during this experiment. was it? discuss using the measured melting point range as evidence.

Answers

The reaction that happens between salicylic acid and acetic anhydride is the synthesis of aspirin. Acetylsalicylic acid is the outcome of this reaction. We expected that acetylsalicylic acid would be transformed into salicylic acid during the experiment.

The measured melting point range is evidence for the transformation. The melting point range of the substance created was 128-132 degrees Celsius. The melting point range of Salicylic acid is 158-161 degrees Celsius. The melting point of the material produced by the experiment is significantly lower than the melting point of salicylic acid.

Therefore, it is evident that acetylsalicylic acid was converted to salicylic acid during this experiment. The results of the experiment are in line with the hypothesis.

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

Which organelle breaks down chemicals in the cell?

Answers

The organelle that breaks down chemicals in the cell is the lysosome.

Lysosomes are membrane-bound organelles that contain digestive enzymes that are responsible for breaking down various biomolecules, such as proteins, nucleic acids, carbohydrates, and lipids, into their constituent building blocks. These enzymes are able to break down these molecules through hydrolysis, where water is used to break the chemical bonds. Lysosomes play a crucial role in maintaining cellular homeostasis by removing unwanted or damaged cellular components, recycling macromolecules, and its defending against invading microorganisms. Dysfunction of lysosomes can lead to a variety of diseases known as lysosomal storage disorders.

To know more about Lysosomes, here

brainly.com/question/28202356

#SPJ4

which example is an exothermic reaction? responses dissolving sugar in water dissolving sugar in water melting ice melting ice dissolving ammonium nitrate in water to cool the water dissolving ammonium nitrate in water to cool the water condensation

Answers

The correct option is dissolving ammonium nitrate in water to cool the water.

Among the given options, the example of an exothermic reaction is dissolving ammonium nitrate in water to cool the water.

Exothermic reactions are chemical reactions that release heat energy into the surroundings. As a result, the products have less energy than the reactants. Dissolving ammonium nitrate in water to cool the water is a good example of an exothermic reaction because it releases heat energy and cools down the surrounding water.

When ammonium nitrate dissolves in water, it releases heat, causing the temperature of the water to decrease. The reaction is exothermic because it releases heat to the surroundings. Dissolving sugar in water and melting ice are examples of endothermic reactions because they absorb heat energy from the surroundings.

Therefore, the correct answer is the option of dissolving ammonium nitrate in water to cool the water.

To learn more about exothermic reactions refer - https://brainly.com/question/10373907

#SPJ11

A neutralization reaction produces H2O and SrBr2. Select the acid-base reactants for this neutralization reaction.
a. SrOH
b. HSr
c. Br(OH)2
d. HBr
e. Sr(OH)2

Answers

The neutralization reaction produces H₂O and SrBr₂. The acid-base reactants for this neutralization reaction are HBr and Sr(OH)₂. Hence, correct option are b) and e).

What is a neutralization reaction?

A neutralization reaction is a chemical reaction between an acid and a base that creates salt and water. Acids donate hydrogen ions, while bases accept them.

When the two react, they neutralize each other and form water (H₂O) and salt. The salt formed is a combination of the anion (from the acid) and the cation (from the base).

In this reaction, acid-base reactants are mixed and neutralized to form water (H₂O) and SrBr₂.

The chemical equation for the reaction:

HBr + Sr(OH)₂ → H₂O + SrBr2

Acid-base reactants for this neutralization reaction are HBr and Sr(OH)₂, and the product produced is water (H₂O) and SrBr₂. Option are b) and e) are correct .

To know more about the neutralization reaction:

https://brainly.com/question/28970253

#SPJ11

The ability of an atom during bond formation to attract electrons from its bonding partner
-The higher it is, the stronger the atom's electron attracting ability
-Nonmetals are higher (gain electrons while metals lose them)
-Electronegativities increase from left to right across periodic table rows and decrease as you move down a column
-Fluorine is the most electronegative element, Francium is the least

Answers

The ability of an atom during bond formation to attract electrons from its bonding partner is called electronegativity. The higher the electronegativity of an atom, the stronger its electron-attracting ability.

Let's understand this in detail:

Electronegativity is the power of an atom or molecule to attract electrons to itself in a covalent bond. An atom's electronegativity is influenced by its atomic number, the number of protons in the atom's nucleus.

The electronegativity of an atom is higher when its valence shell is nearly empty or nearly full.

Electronegativity increases from left to right across a period because of the increasing effective nuclear charge, which is the force of attraction between the positively charged atomic nucleus and the negatively charged electrons.

Electronegativity decreases down a group due to the increasing distance between the valence electrons and the positively charged nucleus.

Francium has the lowest electronegativity, while fluorine has the highest electronegativity.

Learn more about electronegativity: What is electronegativity and how can it be used in determining the polarity of nonpolar​? https://brainly.com/question/18258838

#SPJ11

give the numerical value of n corresponding to the 3p orbital.

Answers

The orbitals that electrons occupy in the quantum mechanical model of the atom have particular energy levels. The size of the electron's orbital is determined by the primary quantum number (n).

an integer that represents the energy level of an electron. The third energy level or shell of the atom contains a subshell called the 3p orbital. As a result, the 3p orbital's numerical value of n equals 3. The third energy level's p subshell, which comes in two different varieties, has three orbitals: 3px, 3py, and 3pz. These orbitals each have a different spatial orientation within the atom and have the capacity to accommodate up to two electrons.The primary quantum number, n=3, and the 3p orbital are equivalent. The energy level of an electron in an atom is described by the fundamental quantum number, n. The "p" in 3p stands for the orbital shape or subshell, and the "3" refers to the value of n.

learn more about 3p orbital here:

https://brainly.com/question/29291501

#SPJ4

Which of the following molecules would have the highest boiling point?
A. hexane
B. 2-methylhexane
C. 2-propylpentane
D. octane

Answers

The molecule with the highest boiling point among the given options is 2-propylpentane. This is because the boiling point increases with the size of the molecule and branching lowers the boiling point. Thus, the correct option is C.

What is meant by boiling point?

The boiling point is the temperature at which a liquid changes to a gas state at normal atmospheric pressure. The boiling point is the temperature at which a liquid's vapor pressure is equal to the atmospheric pressure, which is generally measured in kilopascals. When a liquid's vapor pressure equals the atmospheric pressure, the pressure acting on the surface of the liquid becomes equal to the pressure pushing down on the surface of the liquid.

The boiling point of a liquid is the temperature at which the vapor pressure equals the external or atmospheric pressure, resulting in the formation of a vapor bubble inside the liquid. When the vapor bubble leaves the liquid's surface, the boiling process is complete. The boiling point of a pure liquid changes with the external pressure, which influences the liquid's vapor pressure.

The reason for the difference in boiling points is the size of the molecule. The greater the size of the molecule, the greater the dispersion forces between molecules, the higher the boiling point. Also, branching lowers the boiling point, as branching reduces the surface area of the molecule, lowering the ability of the molecule to interact with one another.

Therefore, the correct option is C.

Learn more about Boiling point here:

https://brainly.com/question/25777663

#SPJ11

6.carbon 14 (14c) is unstable and has a half-life of 5730 years. an organic material buried in sedimentary rocks shows the parent-daughter ratio at 1:15 (meaning 1/16 parent, 15/16 daughter). assuming there was no daughter element at the time of burial, how old is this organic material?

Answers

The time of burial, the organic material will be about 34,880 years old.

What is the half-life of an element?

Half-life (t½) is the time which is required for a quantity of the substance to reduce to the half of its initial value. The term is commonly used in the nuclear physics to describe how quickly the unstable atoms or chemical elements undergo the radioactive decay or how long the stable atoms survive.


The amount of carbon 14 (14C) which can be found in the organic matter decreases due to the radiocarbon process. This process is also called as the radioactive decay. The half-life of carbon-14 (14C) is 5730 years. An organic material which was buried in the sedimentary rocks is examined, and it is the parent-daughter ratio is equal to about 1:15, indicating that there will be 1/16 of the parent element and 15/16 of the daughter element.

The organic material is supposed to have no daughter element at the time of burial. The age of this organic material is to be calculated. As given, the ratio of parent-daughter elements is 1:15 (1/16 parent, 15/16 daughter). After one half-life (i.e., 5730 years), half of the parent atoms will have decayed to the daughter atoms. Therefore, the parent-to-daughter ratio would be 1/32 parent, 31/32 daughter.

After the two half-lives (5730 + 5730 = 11460 years), 1/4 of the original parent atoms will remain, and the ratio will be 1/4 parent, 3/4 daughter. 1/4 is equal to 4/16. 4/16 + 12/16 = 16/16 = 1. This implies that the original amount of carbon 14 (14C) was about 4/16 of what it would have been if there were no daughter material present. To determine the age of the organic material, we may set up the following equation:

Parent to daughter ratio = 1:15 after 2 half-lives,

which is 5730 × 2 = 11,460.15/16 = (1/2)² × (1/16) = 1/64 (15 daughter atoms)

Therefore, there were originally 4 × 15 = 60 carbon 14 (14C) atoms.

1/64 = 1/60 × (1/2)n where n is the number of half-lives which have occurred.

Multiplying both sides by 60 × 64 gives: 1 = 64 × (1/2)n

Subtracting 64 from both sides gives: 63 = (1/2)n

Taking the natural logarithm of both sides gives: ln(-63) = n ln(1/2)

The value of ln(1/2) is -0.69315, so:

n = ln(-63)/ln(1/2)n = 6.0 half-lives have passed (rounded up).

Therefore, the organic material is 6 × 5730 = 34,380 years old.

Learn more about Half-life here:

https://brainly.com/question/24710827

#SPJ11

if a reaction mixture initially contains 5 mol of a and 6 mol of b, how much heat (in kj) will have evolved once the reaction has occurred to the greatest extent possible?

Answers

If a reaction mixture initially contains 5 mol of a and 6 mol of b, then the heat which will have evolved once the reaction has occurred to the greatest extent possible will be -4102.5KJ.

What is heat of reaction?

The given reaction mixture initially contains 5 mol of A and 6 mol of B. We have to find the amount of heat (in kJ) evolved once the reaction has occurred to the greatest extent possible. The balanced chemical equation for the reaction is:

2A + 3B → 4C + 5D

The given reaction is an exothermic reaction. Hence, when the reaction occurs, heat will be evolved. The heat evolved is equal to the product of the number of moles of reactants and the standard enthalpy change of the reaction. The heat evolved can be calculated as follows: Moles of A = 5, Moles of B = 6, Moles of limiting reagent = 5/2 = 2.5

From the balanced chemical equation, it can be seen that 2 moles of A react with 3 moles of B. Hence, 2.5 moles of A will react completely with 2.5 × 3/2 = 3.75 moles of B. The number of moles of A remaining unreacted = 5 - 2.5 = 2.5. The number of moles of B remaining unreacted = 6 - 3.75 = 2.25. The heat evolved during the reaction = (2.5 + 3.75) × (-426) = -4102.5 kJ.

Hence, the amount of heat evolved once the reaction has occurred to the greatest extent possible is -4102.5 kJ.

Learn more about Heat of reaction here:

https://brainly.com/question/30464598


#SPJ11

A student is investigating the properties of several different minerals in order to identify them. What will describe the streak test the student will be performing on each mineral

Answers

The student will record the color of the streak produced by each mineral and compare it to a reference chart to help identify the mineral.

The streak test is a method used by geologists and mineralogists to identify minerals based on the color of the powder they leave behind when scraped against a rough surface. To perform the streak test, the student will rub each mineral against a porcelain tile, creating a streak of powder. This powder is typically a different color than the mineral itself and can be used to identify the mineral.

The color of the streak is often more consistent across different samples of the same mineral than the color of the mineral itself. For example, a sample of hematite may be black, gray, or reddish-brown, but its streak will always be red-brown. This makes the streak test a useful tool for identifying minerals.

To learn more about streak test, here

https://brainly.com/question/1486809

#SPJ4

Which of the following molecules would have the highest boiling point?
a) hexane
b) octane
c) 2-propylpentane
d) 2-methylhexane

Answers

The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.

What is boiling point?

The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.

The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.

Therefore, the correct option is D.

Learn more about Boiling point here:

https://brainly.com/question/25777663

#SPJ11

"¿CÓMO ENVIAR SUMINISTROS A ZONAS INACCESIBLES?"

Una empresa dedicada a la fabricación y distribución de insumos médicos está ensayando distintos diseños de paracaídas para atender su reparto de vacunas a lugares inaccesibles como pequeñas poblaciones asentadas en quebradas o en selva virgen donde no existen carreteras de acceso o pistas de aterrizaje. En este momento sus paracaídas se encuentran en la etapa de investigación y ensayos que permitan asegurar que una caja con las vacunas en frascos de vidrio no se dañe en el momento de llegar al suelo. Dentro de los parámetros de eficiencia que maneja la empresa fabricante de estos paracaídas para suministros, este debe ser pequeño, económico, ligero, resistente; pero en especial, debe reducir significativamente la velocidad de caída de una caja de tetrapak de 1 litro cuyo peso oscila entre los 45 g y 50 g, es decir, el tiempo de descenso con el paracaídas debe ser por lo menos el triple del tiempo de caída libre de la caja.



Para tu pregunta de indagación y su respectiva hipótesis de trabajo, distribuye tus variables en el siguiente cuadro:

Variable Independiente (V. I): Causa



Variable Dependiente (V. D): Efecto



Variables intervinientes (Por controlar para que no afecte a la variable dependiente)


Ayuda porfa doy corona!!!!!

Answers

The independent variable is the design of the parachute, the dependent variable is the descent time of the box, and the intervening variables to control are air resistance, wind direction, and altitude.

Based on the hypothesis that using a parachute design that reduces the falling speed of a box with vaccines will prevent damage upon landing in not accessible areas, the experiment will test the effectiveness of various parachute designs in reducing the falling speed of a 1-liter box weighing between 45g and 50g.

The independent variable is the parachute design, while the dependent variable is the falling speed of the box. The intervening variables that will be controlled to ensure accuracy in the experiment include wind speed, altitude, and weight of the box. The results of the experiment will provide insight into the most effective parachute design for safely delivering vaccines to not accessible areas.

To know more about independent variables, here

brainly.com/question/29430246

#SPJ4

--The complete question is, "HOW TO SEND SUPPLIES TO INACCESSIBLE AREAS?"

A company dedicated to the manufacture and distribution of medical supplies is testing different parachute designs to handle the distribution of vaccines to inaccessible areas such as small populations settled in gorges or vir-gin jungle where there are no access roads or runways. At present, their parachutes are in the research and testing stage to ensure that a box with vaccines in glass vials is not damaged when it reaches the ground. Within the efficiency parameters that the manufacturer of these supply parachutes handles, it should be small, economical, lightweight, resistant; but especially, it must significantly reduce the falling speed of a 1-liter tetrapak box weighing between 45g and 50g, that is, the descent time with the parachute must be at least triple the free fall time of the box.

For your inquiry question and its respective working hypothesis, distribute your variables in the following table:

Independent Variable (IV): Cause

Dependent Variable (DV): Effect

Intervening Variables (To control so they do not affect the dependent variable)--

List at least two situations in which electricity flows outside of common electrical wires.

Answers

Electricity can flow outside of common electrical wires in at least two situations:

1. During an electrical storm, lightning can cause a surge of electricity to flow through the air and into the ground, potentially damaging electrical equipment and causing power outages.

2. In some electrical devices, such as computers and televisions, static electricity can build up and cause a discharge of electricity to flow through the air, potentially damaging the device or causing a shock to the user.

What are the configurations for this stereoisomer of 2-bromo-3-chlorobutane?
A. 2S,3S
B. 2S, 3R
C. 2R, 3S
D. 2R, 3R

Answers

The given stereoisomer of 2-bromo-3-chlorobutane has the configuration of 2R, 3S.

What is a stereoisomer? A stereoisomer refers to the isomer of a compound that has the same molecular formula and sequence of atoms as the original compound, but with a different spatial arrangement of atoms.The difference between stereoisomers and structural isomers is that while stereoisomers have the same chemical formula and atom arrangement, structural isomers have different chemical formulas and atom arrangements. For example, glucose and fructose have the same chemical formula (C6H12O6), but they differ in their atom arrangements and are therefore considered stereoisomers.

Types of stereoisomers: Enantiomers: Enantiomers are mirror images of each other and are non-superimposable, meaning they cannot be placed on top of one another. Stereoisomers that are not enantiomers are known as diastereomers. Diastereomers: These are stereoisomers that are not enantiomers but still have the same atom sequence and chemical formula as each other. Diastereomers have different physical and chemical properties that are not due to stereoisomerism. Examples of diastereomers include cis and trans isomers.

Configurations of 2-bromo-3-chlorobutane:According to the given question, the stereoisomer of 2-bromo-3-chlorobutane has the configuration of 2R, 3S.

For more questions on stereoisomer

https://brainly.com/question/24128816

#SPJ11

2-Bromobutane is optically active but 1-Bromobutane is optically inactive. Why?2-bromobutane is a chiral molecule as it contains an asymmetric carbon atom therefore, it is optically active whereas 1-bromobutane is an achiral molecule as it does not contain an asymmetric carbon atom therefore it is optically inactive.

Answers

2-Bromobutane is optically active because it is a chiral molecule, which contains an asymmetric carbon atom. On the other hand, 1-Bromobutane is optically inactive because it is an achiral molecule, which does not contain an asymmetric carbon atom.

Optically active molecule- A chiral molecule that is capable of rotating light is an optically active molecule.

Chiral molecule- A molecule is called a chiral molecule if it cannot be superimposed with its mirror image. This molecule has no plane of symmetry.

To learn more about "optically active", visit; https://brainly.com/question/24215073

#SPJ11

A chemist adds a strip of magnesium metal to a basic solution. Which of the following best describes the reaction that would occur when the magnesium metal is added to the basic solution? Hint: Will Hor OH be more prevalent in an acidic solution? In a basic solution? You might also find it helpful to reference Tables E.1 and E.2 in the back of your lab manual. A) No reaction. The overall moles of all species stays the same. Reaction producing a white precipitate of Mg(OH)2. B) This causes the overall moles of Mg2+ has decreased. C) Reaction producing aqueous Mg2cations. This causes the overall moles of Mg2to increase.

Answers

Answer:

When a chemist adds a strip of magnesium metal to a basic solution, the reaction that occurs is the reaction producing a white precipitate of Mg(OH)2. The best answer option is A. No reaction.

Explanation:

The overall moles of all species stay the same. The chemical reaction that occurs when magnesium is added to a basic solution is represented as follows:

Mg + 2OH- → Mg(OH)2↓ + H2↑

Where Mg is magnesium metal and OH- is hydroxide ion. In this reaction, magnesium reacts with hydroxide ions to produce magnesium hydroxide and hydrogen gas. Magnesium hydroxide is a white precipitate and will form immediately as soon as magnesium is added to the basic solution.

It is insoluble in water and thus, separates from the solution in the form of a white precipitate. Therefore, the correct answer is option A. No reaction. The overall moles of all species stay the same.

To know more about  Mg(OH)2 refer here: https://brainly.com/question/1978000#
#SPJ11

Consider the following equation in answering #45 CH4(g) + 202(g) → CO2(g) + 2H2O(g) 5. This reaction is performed under constant temperature and pressure, and 2.75 L of gas are collected when the reaction is complete. How many liters of methane (CH4) were present at the beginning of the reaction? a. 0.917 L b. 1.00L c. 1.83 L d. 2.75 L e. 5.50I

Answers

The reaction is performed under constant temperature and pressure, and 2.75 L of gas are collected when the reaction is complete. The volume of methane present at the beginning of the reaction is 2.49 L. Thus, the correct option will be D.

What is the volume of methane?

Balanced equation can be written as: CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g). From the balanced chemical equation, it is clear that 1 mole of CH₄ reacts with 2 moles of H₂O gas. Hence, the number of moles of CH₄ can be calculated by using the ideal gas equation, that is,

PV = nRT

V/n = RT/P

n = PV/RT

The volume of gas is V = 2.75 L. The temperature and pressure are constant. Hence, PV = nRT

The gas constant R = 0.0821 L atm K⁻¹mol⁻¹

The temperature is not given, hence can be assumed to be 298 K. The pressure is not given, hence can be assumed to be 1 atm.

2.75 × 1 = n × 0.0821 × 298

n = (2.75 × 1) / (0.0821 × 298) = 0.111 mole

From the balanced chemical equation, it is known that 1 mole of CH₄ occupies 22.4 L at STP. Hence, the number of liters of CH₄ present at the beginning of the reaction can be calculated by using the following formula.

Volume of CH₄ = n(CH₄) × 22.4 = 0.111 × 22.4 = 2.4864 L

Approximately, the number of liters of CH₄ present at the beginning of the reaction is 2.49 L.

Learn more about Chemical reaction here:

https://brainly.com/question/29762834

#SPJ11

who performed an experiment with a cathode ray tube and discovered the existence of negatively charged particles within the atom?

Answers

The scientist who performed an experiment with a cathode ray tube and discovered the existence of negatively charged particles within the atom was J.J. Thomson.

This experiment is commonly known as the cathode ray tube experiment. A cathode ray tube experiment is a scientific experiment that was carried out to show that negatively charged particles exist in atoms. The experiment involves passing an electric current through a gas-filled tube called a cathode ray tube.  J.J. Thomson discovered that cathode rays were made up of negatively charged particles called electrons. He discovered that the charge to mass ratio of these particles was much greater than that of the atoms that the cathode ray tube was made of. This led him to conclude that these particles were not part of the atom but were rather a fundamental constituent of all atoms.

This was a groundbreaking discovery and it led to the development of the atomic model. The first "subatomic particles," called electrons by Irish scientist George Johnstone Stoney in 1891, were negatively charged particles smaller than atoms. J. J. Thomson was able to measure the charge-mass ratio of cathode rays in 1897 and demonstrate this. Ferdinand Braun, a German physicist, created the "Braun tube," the first iteration of the CRT, in 1897. A Crookes tube modified with a phosphor-coated screen, it was a cold-cathode diode. It was Braun who originally thought of using a CRT as a display device.

For more such questions on J.J. Thomson , Visit:

https://brainly.com/question/18621643

#SPJ11

While the composition of oxygen and nitrogen in air does not change with altitude, the decreasing temperature at high altitude does change the percent of air that is composed of H2O. Assuming constant relative humidity, which of the following can be asserted about the total grams of H2O in a given volume of air at 3000 m above sea level versus at sea level?
A. Assuming constant relative humidity means that air has roughly the same mass of H2O per unit volume at 3000 m above sea level.
B. Whether air at very high altitude has more or less mass of H2O per unit volume than it does at sea level depends on the temperature at high altitude.
C. Air has significantly more mass of H2O per unit volume at 3000 m above sea level.
D. Air has significantly less mass of H2O per unit volume at 3000 m above sea level.

Answers

The correct assertion is that whether air at very high altitude has more or less mass of H2O per unit volume than it does at sea level depends on the temperature at high altitude and the correct option is option B.

As the altitude increases, the temperature decreases. The amount of water vapor that air can hold is dependent on its temperature, with colder air being able to hold less moisture.

Therefore, at higher altitudes with lower temperatures, the air has a reduced capacity to hold water vapor. This means that the amount of water vapor in a given volume of air at high altitude will be less than at sea level, assuming constant relative humidity.

Thus, the ideal selection is option B.

Learn more about Composition of air, here:

https://brainly.com/question/28704548

#SPJ12

Other Questions
Rewrite each expression as the product of two fractions, one of which is equal to 1. Then, write it as anequivalent, but simpler, expression.(a)10510(b)(c)18 when creating research plans, speakers should consult school or community libraries as well as the internet Evolution is simply _ ______ __ ___ _______ ______ __ _ __________ ____ ____. The ______ is particularly well-suited to both foraging societies and industrial economies because it allows for greater mobility and flexibility in order to adapt to changing economic or subsistence opportunities what are the different problems in your community that can affect your daily life Find the lengths of the diagonals of rectangle QRST when QS = 20x - 5 and RT = 14x + 7. A) 70B) 99. 7C) 17. 5D) 35 A photodetector has three polarizing films between it and a source ofunpolarized light. The first film is oriented vertically. At what angle should thesecond polarizing film be oriented so that 37.5 percent of the original lightintensity reaches the detector?Investigation 12 Electromagnetic Radiation Can any help with this chemistry question?? I have an exam tomorrow How to graph it on a coordinate plan to the right 5x-3y=18 briefly explain how one specific event or development in the period from 1944 to 1970 resulted from the historical situation suggested by the image. The product of two consecutive positive even integers is 120. Find the value of thelesser integer. find a linear homogeneous constant-coefficient differential equation with the general solution that has the form Suppose the reaction temperature X (in C) in a certain chemical process has a uniform distribution with A = -7 and B = 7.(a) Compute P(X < 0).(b) Compute P(-3.5 < X < 3.5).(c) Compute P(-5 X 6).(d) For k satisfying -7 < k < k + 4 < 7, compute P(k < X < k + 4). A ____________ is one type of malicious software program that disrupts or destroys existingprograms and networks.a.Computer wormb.Computer virusc.Trojan horsed.Cyber bully Rita gets paid $16 per hour for the first 8 hours she works each day. She earns 1 1/2 times her hourly pay rate for time she works over 8 hours each day. Ritas work day for Monday is described in the list. worked from 8:00 a.m. to 12:00 p.m. took a 30-minute lunch break worked until 6:00 p.m. Rita does not get paid for her lunch break. How much money did Rita earn for the time she worked on Monday? Show or explain all of the steps you used to determine your answer.] a) if lisa's score was 83 and that score was the 29th score from the top in a class of 240 scores, what is lisa's percentile rank? (round your answer to the nearest whole number.) products that are necessities with no close substitutes tend to have ________ demand curves.A.Perfectly elastic B.ElasticC.Unit elastic the height of the akashi kaikyo bridge from the bride deck to the top of the center support is 297 meters and the distance from the center of the bridge to the connection of the suspension cable is 995 meters. (see picture below.) i would like you to find the angle of depression from the top of the center support to the end of the support cable. A good strategy for weight gain in underweight individuals is to ____. a. eat energy-dense foods b. select foods with high levels of trans fats What terms above apply to triangle sides?