If 200 grams of potassium nitrate are mixed with 100 grams of water at 85°C, how much will not dissolve?
PLEASE HELP

The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.

The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B

According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:

[A] = C₀ - x

[B] = C₀ - x

[AB] = C₀ - x

Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.

The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."

[AB] = C-x

Let's calculate the equilibrium concentration of AB:

[AB] = C₀ - x = 0.290 M - x

At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:

Kc =x²{0.290 - x}

The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}

5.26 = x²{0.290 - x}

{x=0.093}

After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:

[A] = [B] = x{2} = {0.093}{2} = 0.0465

Hence, the concentrations of A and B after 75 seconds are 0.0465 M.

Learn more about Equilibrium concentration here:

https://brainly.com/question/16645766

#SPJ11

A) Thermal wavelength (or de Broglie wavelength) of diatomic oxygen at T=310K is 1.75 x 10⁻¹¹ m. B) q_rot = 74.9. C) q_vib=  2.61 x 10⁻². D) θ_vib(bound) = 1600 K ; E) q_vib = 7.63 x 10⁻². ; F) K = 3.34 x 10⁵; G) ΔG°= 50.7 kJ/mol. H) ; ΔH° = -28.6 kJ/mol. ; I) fB =  8.95 x 10⁻⁹.

Partial pressure is the pressure that gas, in a mixture of gases, would exert if it alone occupied the whole volume occupied by mixture.

Part A) As λ = h / (mv) and PV = nRT

v = √(3RT/M) = √((3 x 0.08206 x 310) / 5.31 x 10⁻²⁶) = 464.5 m/s

λ = 6.626 x 10⁻³⁴ J s / (5.31 x 10⁻²⁶ kg x 464.5 m/s) = 1.75 x 10⁻¹¹ m

Therefore, thermal wavelength (or de Broglie wavelength) of diatomic oxygen at T=310K is 1.75 x 10⁻¹¹ m.

Part B)  As q_rot = (T / θ_rot) / [1 - exp(-T/θ_rot)]

θ_rot is the rotational temperature, h is Planck's constant, I is moment of inertia of the molecule, and kB is the Boltzmann constant. For O2, I = 1.94 x 10⁻⁴⁶ kg m² and θ_rot = 2.07 K.

q_rot = (310 K / 2.07 K) / [1 - exp(-310 K / 2.07 K)] = 74.9

Therefore, the rotational partition function of oxygen at T=310K is 74.9.

Part C) q_vib = 1 / (1 - exp(-θ_vib/T))

θ_vib is the vibrational temperature of the molecule.

q_vib = 1 / (1 - exp(-2260 K / 310 K)) = 2.61 x 10⁻²

Therefore, the bond vibrational partition function of oxygen gas at T=310K is 2.61 x 10⁻².

Part D) μ = m_O2 x m_heme / (m_O2 + m_heme)

μ = 32 amu x 600 amu / (32 amu + 600 amu) = 31.2 amu

ν = 1 / (2πc) x √(k / μ)

ν = 1 / (2π x 2.998 x 10⁸ m/s) x √(500 N/m / 31.2 amu) = 1.45 x 10¹³ Hz

θ_vib(bound) = hν / kB

θ_vib(bound) = (6.626 x 10⁻³⁴ J s x 1.45 x 10^13 Hz) / (1.381 x 10⁻²³ J/K) = 1600 K

Therefore, vibrational temperature of heme-bound oxygen is estimated to be 1600 K, which is lower than vibrational temperature of free oxygen gas (θ_vib(gas) ≈ 2260 K).

Part E) q_vib = 1 / (1 - exp(-θ_vib(bound)/T))

q_vib = 1 / (1 - exp(-1600 K / 310 K)) = 7.63 x 10⁻²

Therefore, vibrational partition function for oxygen bound to a heme group at T=310K is 7.63 x 10⁻².

Part F) K = (P_O2 x q_vib x exp(-w/(RT))) / Λ

K = (1.00 atm x 7.63 x 10⁻² x exp(-(-63 kJ/mol)/(8.314 J/(mol K) x 310 K))) / (1.75 x 10⁻¹¹ m) = 3.34 x 10⁵

Therefore, binding constant for the weak bond formed between oxygen and the heme group is 3.34 x 10⁵ .

Part G: K = (P_O2 x q_vib x exp(-ΔG°/(RT))) / Λ

ΔG° = -RT ln K

ΔG° = - (8.314 J/(mol K) x 310 K) x ln (3.34 x 10⁵ / (0.05 atm x 7.63 x 10⁻² x 1.75 x 10⁻¹¹m)) = -50.7 kJ/mol

Therefore, standard Gibbs energy change for binding of oxygen to the heme group at P=0.05 atm and T=310K is -50.7 kJ/mol.

Part H) ΔG° = ΔH° - TΔS°

ΔH° = ΔG° + TΔS°

ΔH° = -50.7 kJ/mol + (310 K x 70 J/(mol K)) = -28.6 kJ/mol

Therefore, standard enthalpy change for binding of oxygen to heme group at P=0.05 atm and T=310K is -28.6 kJ/mol.

Part I) As fB = [O2]/([O2] + K)

= (0.003 mol/L) / (0.003 mol/L + 3.34 x 10⁵ L/mol) = 8.95 x 10⁻⁹

Therefore, fraction of binding sites on the protein that are bound to oxygen is 8.95 x 10⁻⁹.

To know more about partial pressure, refer

https://brainly.com/question/19813237

#SPJ1

A color change would still occur at the equivalence point if an indicator had not been introduced during titration, but it would not be obvious when it had been reached.

Even though the pH of the solution would still vary dramatically at the equivalency point, it would be challenging to determine when this point has been achieved without an indicator. By include an indication in the formula, the endpoint may be identified by a distinct and perceptible color shift. This makes it easier for the researcher to calculate the volume of titrant needed to achieve the equivalence point. So, it would not be possible to determine when the indicator was added if one was not used during titration. a distinct and perceptible color shift.

learn more about indicator  here:

https://brainly.com/question/20264817

#SPJ4

For the regular tetrahedron, the exact value of $v^2$ is $\frac{1}{144}$.

The regular tetrahedron is a pyramid with four faces, each of which is an equilateral triangle. Let $v$ be the volume of a regular tetrahedron whose sides each have length 1.  A regular tetrahedron is a three-dimensional object with four triangular faces that are congruent. It has four vertices, six edges, and four faces that are equilateral triangles. Let us find the length of height of the tetrahedron using Pythagoras theorem.

$$Height^2=1^2-\left(\frac{1}{2}\right)^2$$

$$\Rightarrow Height^2=1-\frac{1}{4}$$

$$\Rightarrow Height=\frac{\sqrt3}{2}$$

Now, the volume of a tetrahedron is given as,

$$v=\frac{1}{3} \times Area_{base} \times Height$$T

he base of the tetrahedron is an equilateral triangle. We know that the area of an equilateral triangle with side $a$ is,

$$Area=\frac{\sqrt3}{4}a^2$$

For the given tetrahedron, the area of the base is,

$$Area_{base}=\frac{\sqrt3}{4} \times 1^2$$

$$\Rightarrow Area_{base}=\frac{\sqrt3}{4}$$

Now, the volume of the given tetrahedron is,

$$v=\frac{1}{3} \times \frac{\sqrt3}{4} \times \frac{\sqrt3}{2}$$

$$\Rightarrow v=\frac{\sqrt3}{12}$$

Thus, the square of the volume of the given tetrahedron is,

$$v^2=\left(\frac{\sqrt3}{12}\right)^2$$

$$\Rightarrow v^2=\frac{1}{144}$$

Therefore, the exact value of $v^2$ is $\frac{1}{144}$.

Learn more about Tetrahedron:

https://brainly.com/question/14493233

#SPJ11

When a scientist carefully examines any quantities repeatedly, they actually expect that all but one measurement will be the same. The correct option is C.

Measurement error is the difference between the value obtained by the observer and the true value of the quantity being measured. When scientists take measurements, they try to reduce errors as much as possible so that they can have a more precise value. Measurement error is divided into two categories: systematic errors and random errors.

In any situation, scientists and researchers want to ensure that their measurements are as accurate as possible. As a result, when taking measurements, they will repeat the measurements multiple times to obtain the most precise data possible. In such a situation, a scientist will expect that all but one measurement will be the same. They will then take the average of the multiple measurements taken, which is more accurate than taking a single measurement. This technique reduces the likelihood of systematic errors, which can arise due to environmental factors, instrument errors, or personal errors.

For more such questions on error, click on:

https://brainly.com/question/30610309

#SPJ11

The statement "the percent ionization of a weak acid in water increases as the concentration of acid decreases" is CORRECT.

It happens because of Le Chatelier's principle which states that a system at equilibrium will respond to any external changes to oppose the changes and re-establish the equilibrium. A weak acid in water is in equilibrium with its ions as follows:

  HA (aq) + H2O (l) ⇌ H3O+ (aq) + A- (aq)

Where HA is the weak acid and A- is its conjugate base.

The extent of ionization or dissociation of the weak acid is measured by its degree of ionization which is expressed as a percentage. It can be calculated as:

Degree of ionization = (amount of HA ionized / initial concentration of HA) × 100

As per the statement, if the concentration of the weak acid is decreased, the system is no longer at equilibrium as the amount of HA will decrease. According to Le Chatelier's principle, the system will shift towards the side with more HA molecules to restore equilibrium. This will result in more dissociation or ionization of HA to form H3O+ and A-. Hence, the degree of ionization or percent ionization of the weak acid will increase with a decrease in the concentration of the acid.

Learn more about Le Chatelier's principle at https://brainly.com/question/2943338

#SPJ11

The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.

To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.

The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.

Learn more about boiling point: https://brainly.com/question/40140

#SPJ11

The false statement among the given options is (d) Primary key is always numeric field.

A primary key is a field in a database that has unique values for each record. It is a unique identifier that distinguishes one record from another. Primary keys ensure that each record in a table has a unique identifier. A primary key is a special type of unique key that is used to identify a record in a table.

Primary Key properties A primary key has the following properties:

Types of Primary Key A primary key can be of the following types:

Numeric keys - These are keys that contain numeric values, such as integers, floats, or decimals. They can be used for counting or sorting purposes.

Character keys - These are keys that contain character values, such as letters, symbols, or numbers. They can be used for indexing or searching purposes.

Combination keys - These are keys that are made up of more than one field. They are used when a single field cannot uniquely identify a record. For example, a combination of first name, last name, and date of birth can be used to uniquely identify a person.

for such more question on Primary key

https://brainly.com/question/12001524

#SPJ11

No, during a course of reaction, multiple activated complexes can be formed for a particular type of reaction. An activated complex is a short-lived, high-energy intermediate state that occurs during a chemical reaction.

Energy is a fundamental concept in physics that describes the capacity of a physical system to do work or produce a change. It is a property of matter and radiation and can be converted from one form to another. There are various types of energy, including kinetic energy (energy of motion), potential energy (energy due to position or configuration), thermal energy (energy due to the temperature of a system), chemical energy (energy stored in the bonds between atoms and molecules), and nuclear energy (energy stored in the nucleus of an atom). The unit of energy is the joule (J) in the SI system.

To know more about energy visit :

https://brainly.com/question/11399976

#SPJ1

The given equation can be rewritten by using the smallest coefficients possible.

A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge are the same for both the reactants and the products

Balanced Chemical Equation:

3Fe(s) + 4H2O(I) → Fe3O4(s) + 4H2(9)

Thus, this is the balanced chemical equation using the smallest coefficients possible. In the above-balanced chemical equation, there are smaller coefficients compared to the original equation. Hence, the given equation can be rewritten using the smallest coefficients possible.

To know more about Balanced Chemical Equation:

https://brainly.com/question/28294176

#SPJ11

The gas you are referring to is radon. It is a radioactive gas that occurs naturally in the earth's soil and rocks, particularly in areas with high levels of uranium deposits.

Radon is colorless, odorless, and tasteless, which makes it difficult to detect without special equipment. Radon can enter buildings through cracks in the foundation, walls, and floors, and can accumulate to dangerous levels, especially in poorly ventilated areas. Exposure to high levels of radon gas has been linked to an increased risk of lung cancer, particularly in smokers. It is important to test for radon levels in homes and take steps to reduce levels if they are found to be too high.

To know more about Radon, here

brainly.com/question/13526655

#SPJ4

When LiClO4 (Lithium perchlorate) is dissolved in water, it produces a solution with the highest pH out of the five salts mentioned.

Explanation: When dissolved in water, KF (Potassium fluoride) produces the solution with the highest pH among the given salts.What are acids and bases?Acids and bases are known as Bronsted-Lowry acids and bases. A substance that can donate a proton is known as an acid, whereas a substance that can receive a proton is known as a base.Acids and bases are distinguished by their pH, with acids having a pH of less than 7 and bases having a pH of greater than 7. The pH of a substance is calculated on a logarithmic scale from 0 to 14, with 0 being the most acidic and 14 being the most basic.As a result, the greater the pH, the more basic the substance. Now we are going to discuss which one of the following salts, when dissolved in water, produces the solution with the highest pH?Among the given salts, when dissolved in water, KF produces the solution with the highest pH. It is an ionic compound with a high solubility in water. KF is produced when potassium and fluorine ions react. K+ is the ion present in this compound that gives rise to a basic solution when it dissolves in water. The K+ ion is not acidic, which implies that it cannot accept protons in solution. As a result, the solution will be more alkaline, indicating a higher pH. Hence KF produces the solution with the highest pH when dissolved in water.

For more such questions on perchlorate

https://brainly.com/question/21329214

#SPJ11

The answer for the given question is 48.97g of Na

What is chemical reaction ?

A chemical reaction is a process that involves the transformation of one or more substances into one or more new substances with different properties. During a chemical reaction, bonds between atoms in the reactants are broken and new bonds are formed to produce the products

To solve this problem, we need to use stoichiometry, which is a way of calculating the amounts of reactants and products in a chemical reaction.

Step 1: Balance the equation.

The equation is already balanced.

Step 2: Convert the volume of H2 to moles.

We know that 27 L of H2 was produced, so we can use the ideal gas law to convert this volume to moles:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming standard conditions (STP) for the gas, we have:

P = 1 atm

V = 27 L

T = 273 K

R = 0.08206 L·atm/K·mol

Substituting these values into the equation, we get:

n = PV/RT = (1 atm)(27 L)/(0.08206 L·atm/K·mol)(273 K) = 1.06 mol H2

Step 3: Use stoichiometry to find the moles of Na.

From the balanced equation, we see that 2 moles of Na react with 1 mole of H2. Therefore, the number of moles of Na that reacted is:

n(Na) = 2 × n(H2) = 2 × 1.06 mol = 2.12 mol Na

Step 4: Convert the moles of Na to grams.

To convert moles to grams, we need to use the molar mass of Na, which is 22.99 g/mol. Therefore:

mass(Na) = n(Na) × molar mass(Na) = 2.12 mol × 22.99 g/mol = 48.97 g Na

So the answer we get is 48.97g of Na, which is different from the given answer of 55.40g Na. This may be due to rounding or a different assumption of STP.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ1

The speed of the protons is approximately 4.04 x 10⁷ meters per second (m/s).

Given to us is the particles are protons, which have a charge of +1.6 × 10⁻¹⁹ coulombs (C), and the potential difference is 62 MV (million volts), which is equivalent to 62 × 10⁶ volts (V).

To calculate the speed of the protons, we can use the formula for the kinetic energy of a charged particle accelerated through a potential difference.

The kinetic energy (KE) of a particle is given by:

KE = qV

Where:

q is the charge of the particle

V is the potential difference

Substituting the values into the formula:

KE = (1.6 × 10⁻¹⁹ C) × (62 × 10⁶ V)

KE = 9.92 × 10⁻¹³ J

The kinetic energy of the protons is 9.92 × 10⁻¹³joules.

Now, we can use the formula for kinetic energy to calculate the speed of the protons. The kinetic energy (KE) is related to the speed (v) of a particle by the formula:

KE = (1/2)mv²

Where:

m is the mass of the particle

v is the speed

The mass of a proton is approximately 1.67 x 10⁻²⁷ kilograms (kg). Rearranging the equation, we can solve for the speed:

v² = (2KE) / m

v = √((2KE) / m)

Substituting the values into the equation:

v = √((2 × 9.92 × 10⁻¹³ J) / (1.67 × 10⁻²⁷ kg))

v = 4.04 × 10⁷ m/s

Therefore, the speed of the protons is approximately 4.04 × 10⁷ meters per second (m/s).

Learn more about the speed of the proton using kinetic energy here:

https://brainly.com/question/8636674

#SPJ 12

The stoichiometric ox-f mass ratio for the reaction between CH4 and O2 is 1:2. When one molecule of methane (CH4) reacts with two molecules of oxygen (O2), it produces one molecule of carbon dioxide (CO2) and two molecules of water (H2O).

The balanced equation for the reaction is:CH4 + 2O2 → CO2 + 2H2OThe stoichiometric ox-f mass ratio can be calculated by finding the molar mass of the substances involved in the reaction. The molar mass of CH4 is 16.04 g/mol, and the molar mass of O2 is 32.00 g/mol.

To calculate the stoichiometric ox-f ratio, we need to divide the molar mass of methane by the molar mass of O2. This gives us : 16.04 g/mol ÷ 32.00 g/mol = 0.50125:1. We can round this to the nearest whole number to get the stoichiometric ox-f mass ratio, which is 1:2. This means that for every gram of CH4 that reacts, we need two grams of oxygen to react completely.

Know more about  mass ratio here:

https://brainly.com/question/14577772

#SPJ11

It appears to be related to a volcanic activity alert system in a certain country. The statement mentions that a volcano is currently at level 4, which is the second-highest level on the country's volcano-alert system.

A volcano is a graphical representation of the relationship between the energy changes and reaction progress in a chemical reaction. It is commonly used to describe acid-base reactions, where the reactants and products have different acid-base properties.

The volcano plot is a graph with the reaction rate or activity of a catalyst on the y-axis and the reaction-free energy or potential on the x-axis. It is named after its shape, which resembles a volcano with a peak representing the maximum reaction rate or activity.

The position of a reactant or catalyst on the volcano plot determines its ability to promote the reaction. If it is to the left of the peak, the reaction is thermodynamically favorable but kinetically slow. If it is to the right of the peak, the reaction is kinetically favorable but thermodynamically less favorable.

To learn more about Volcano visit here:

brainly.com/question/12945128

#SPJ4

Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.

Power = Energy/Time

25 W = Energy/3600 s

Energy = 25 W x 3600 s = 90000 J

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy

The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:

90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol

The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:

0.0321 mol x 180 g/mol = 5.78 g

Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).

In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.

Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.

To learn more about Power visit here:

brainly.com/question/13937812

#SPJ4

N2 is the limiting reagent since it produces less NH3.

What is Limiting Reagent?

In a chemical reaction, the limiting reagent is the reactant that is completely consumed and limits the amount of product that can be formed. The amount of product formed is determined by the amount of limiting reagent available. The reactant that is not completely consumed is called the excess reagent, and some of it remains after the reaction is complete.

To determine which reactant is the limiting reagent, we need to calculate the number of moles of each reactant.

Moles of H2 = mass / molar mass = 83.6 g / 2.016 g/mol = 41.5 mol

Moles of N2 = mass / molar mass = 257 g / 28.02 g/mol = 9.17 mol

According to the balanced chemical equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, to react completely, 1 mole of N2 requires 3 moles of H2. Since we have more than enough H2 to react with the available N2, H2 is not the limiting reagent.

To calculate the moles of NH3 produced, we need to determine the limiting reagent.

Moles of NH3 produced if H2 is limiting reagent = 41.5 mol / 3 mol H2 per 2 mol NH3 = 27.67 mol NH3

Moles of NH3 produced if N2 is limiting reagent = 9.17 mol / 1 mol N2 per 2 mol NH3 = 4.58 mol NH3

Therefore, N2 is the limiting reagent since it produces less NH3.

We can tell that N2 is the limiting reagent because it produces less NH3 compared to the amount that would be produced if all of the H2 was used up in the reaction.

Learn more about Limiting Reagent from given link

https://brainly.com/question/23661051

#SPJ1

The increased amount of [tex]CoCl_2[/tex] solution, increasing the concentration of [tex]CoCl_2[/tex]. This resulted in the equilibrium shifting in the forward direction due to Le Chatelier's Principle.

The reaction can be written as follows : [tex]CoCl_2[/tex] (aq) ⇌ [tex]Co^2+ (aq) + 2Cl^- (aq)[/tex]

Learn more about  equilibrium shifts: https://brainly.in/question/40922197

#SPJ11

The correct option is A. "more; less; greater; higher".

Explanation: Intermolecular forces refer to the forces of attraction and repulsion between molecules. These forces determine the physical properties of a substance, such as melting point, boiling point, and solubility.

A molecular substance with strong intermolecular forces means that the molecules are held tightly together, which requires more energy to overcome to break the bond.

The molecules at the surface of the liquid are held more tightly and vaporize less easily than molecules with weaker intermolecular forces. Molecules with weaker intermolecular forces are more likely to escape from the surface of the liquid and form the vapor phase.

Therefore, the amount of substance in the vapor phase will be less for molecules with strong intermolecular forces.

The vapor pressure is the pressure exerted by the vapor phase of a substance in equilibrium with its liquid or solid phase. The vapor pressure increases as the temperature increases or the amount of substance in the vapor phase increases.

Since the amount of substance in the vapor phase is less for molecules with strong intermolecular forces, the vapor pressure will be greater for molecules with weaker intermolecular forces.

to know more about force refer here

https://brainly.com/question/13191643#

#SPJ11

If a molecular substance has strong intermolecular forces, the molecules at the surface of the liquid are held less tightly and vaporize more easily than molecules with weaker intermolecular forces. The amount of substance in the vapor phase will be greater than for molecules with weak intermolecular forces and the vapor pressure will therefore be higher.The correct answer is b.

Molecules are held together by the force of attraction between the atoms in them, but there are also forces between the molecules. These forces are called intermolecular forces. For example, the intermolecular forces that exist between water molecules are hydrogen bonding, while the intermolecular forces between propane molecules are van der Waals forces.

The boiling point of a liquid is determined by the strength of the intermolecular forces between the molecules that make up the liquid. The stronger the intermolecular forces, the higher the boiling point.

Learn more about intermolecular forces here:

brainly.com/question/9328418

#SMJ11

A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]

The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.

As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].

Learn more about rate law at:

https://brainly.com/question/14779101

#SPJ11

The substitution product that is expected when 1-bromo-1-methylcyclohexane undergoes an Sn1 reaction in the presence of water is 1-Methylcyclohexanol.1-bromo-1-methylcyclohexane undergoes an Sn1 reaction in the presence of water.

SN1 is a nucleophilic substitution reaction mechanism that occurs when the rate-determining step involves a unimolecular or one-molecule reaction. The reaction proceeds by way of a carbocation intermediate. SN1 reactions are often observed for tertiary alkyl halides, which produce tertiary carbocations.The ncarbocation itermediate is formed by the loss of a leaving group, which is the bromine atom in this case. The carbocation intermediate is then attacked by water, which acts as the nucleophile.

1-Bromo-1-methylcyclohexane → 1-MethylcyclohexanolIn the presence of water, 1-methylcyclohexane undergoes an SN1 reaction to produce 1-Methylcyclohexanol as the substitution product.

To know more about Sn1 reaction please visit :

https://brainly.com/question/14057011

#SPJ11

A catalyst will not have an impact on the position of equilibrium. Therefore option a is the correct answer.

Specifically, a catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It does this by providing an alternative reaction pathway with a lower activation energy, which increases the reaction rate and therefore speeds up the rate at which equilibrium is achieved. The transition energy of the equilibrium is also lowered, meaning it will be easier for the reaction to move from the reactants to the products.

Therefore catalysts can alter the rate at which a reaction proceeds, but they cannot influence the position of equilibrium.

learn more about catalyst

https://brainly.com/question/318426

#SPJ11

The orbital diagram suggest Pauli's exclusion principle.

option C.

Pauli's Exclusion Principle is a fundamental principle of quantum mechanics that states that no two identical fermions (particles with half-integer spin, such as electrons, protons, and neutrons) can occupy the same quantum state simultaneously.

In other words, if one fermion is in a particular quantum state, then no other fermion can be in that same quantum state at the same time.

This principle is crucial in understanding the behavior of matter at the atomic and subatomic level. It explains, for example, why electrons in an atom occupy different energy levels and why atoms and molecules have unique chemical and physical properties.

The diagram suggest that the spin is different, so it describes Pauli's exclusion principle.

Learn more about Pauli's exclusion principle here: https://brainly.com/question/16950638

#SPJ1

For the first unknown concentration with an absorbance of 1.72, the concentration will be, c = 1.72/(ɛ × b). For the second unknown concentration with an absorbance of 0.75, the concentration will be: c = 0.75/(ɛ × b).

Beer lambert's law states that the concentration of a solution is directly proportional to the absorbance of a solution. Mathematically, Beer's Law: A = εlc

where, A is absorbance, ε is the molar absorptivity, l is the path length, and c is the concentration.

We can rewrite the equation as, c = A / εl

where, c is the concentration, A is the absorbance, ε is the molar absorptivity, and l is the path length.

We have two absorbance values, which we will use to determine the concentration of the unknowns. Let's substitute the given values into the equation to determine the concentration of the first unknown.

where, c₁ = A₁ / εlc₁ = 1.72 / εl (1)

Now, let's substitute the second absorbance value to determine the concentration of the second unknown.

c₂ = A₂ / εlc₂ = 0.75 / εl(2)

The concentrations of the unknowns are c₁ and c₂, which we have expressed in terms of the concentration of the solution. The total concentration of the solution is not provided. Thus, we cannot determine the concentration of the unknown solutions.

Learn more about Absorbance here:

https://brainly.com/question/29750964

#SPJ11

The correct sequence of steps in the formation of an action potential is as follows: 4. a graded depolarization brings an excited membrane to threshold potential, 6. voltage-gated Na+ channel activation occurs, 7. Na+ enter the cell and depolarization occurs, 1. voltage-gated Na+ channels are inactivated, 2. voltage-gated K+ channels open and K+ move out of the cell, 3. voltage-gated Na+ channels regain their normal properties, and 5. a temporary hyperpolarization occurs.
Explanation: Action potential is generated when a neuron sends information down an axon, away from the cell body. The steps involved in the formation of an action potential are:Graded depolarization occurs, which brings an excited membrane to threshold potential.Na+ enters the cell and depolarization occurs.Voltage-gated Na+ channel activation occurs.Voltage-gated Na+ channels are inactivated.Voltage-gated K+ channels open and K+ move out of the cell.A temporary hyperpolarization occurs.Voltage-gated Na+ channels regain their normal properties, which complete the cycle.Action potential is a result of ions moving in and out of the cell membrane, which changes the voltage difference between the inside and outside of the cell membrane. Action potential, therefore, involves the sequential opening and closing of different types of voltage-gated ion channels, including sodium (Na+) and potassium (K+) channels.

For more such questions on hyperpolarization

https://brainly.com/question/15997473

#SPJ11

The percent by weight of acetic acid in the vinegar is  3.27% for the given 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m NaOH.

Vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water. A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH. Find the percentage of acetic acid by weight in vinegar. As per the question, vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water.

A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH.

Since NaOH and HC₂H₃O₂ reacts in a 1:1 molar ratio, moles of NaOH used = moles of HC₂H₃O₂ in vinegar

So,0.100 mol/L solution of NaOH = 0.100 mol/L solution of HC₂H₃O₂ in vinegar (as they react in 1:1 ratio).

Also, Volume of NaOH = 30.10 mL = 30.10/1000 = 0.0301L

Thus, Amount of HC₂H₃O₂ in vinegar = 0.100 mol/L × 0.0301 L = 0.00301 mol.

Molar mass of HC₂H₃O₂ = 60.05 g/mol.

Weight of HC₂H₃O₂ in 5.54 g vinegar = 0.00301 mol × 60.05 g/mol = 0.18086 g.

Percentage by weight of acetic acid in the vinegar = 0.18086 / 5.54 × 100 = 3.27%.

Read more about moles here:

https://brainly.com/question/15356425

#SPJ11

To calculate the equilibrium constant for a reaction with heat absorbed, determine equilibrium concentrations and use the law of mass action.

At the concentration equilibrium constant for a certain reaction, heat is absorbed if the reaction is run at constant pressure. Some of the reactants are liquids and solids, and the net change in moles of gases is .

To calculate the equilibrium constant, we need to first determine the equilibrium concentrations of each species. We can do this by using the mass and moles of the reactants and products, the stoichiometric coefficients, and the net change in moles of gases.

Once we have the equilibrium concentrations, we can calculate the equilibrium constant using the law of mass action:

Learn more about equilibrium: https://brainly.com/question/517289

#SPJ11

The following 0.10 m solutions can be ranked from lowest to highest boiling point (bp) as:

ammonia < diethylamine < methylamine < t-butylamine.

The elevation in boiling point, ΔTb can be calculated using the expression;

ΔTb = Kb × bm

where ΔTb is the elevation in boiling point, Kb is the boiling point elevation constant, m is the molality of the solution.

For a given solvent, the boiling point elevation is directly proportional to the molality of the solute present, which means that the higher the molality of the solute, the higher the elevation in boiling point. Hence, we can rank the given solutions based on their molality.

The given solutions are all amines and they have the same formula NH₂R. The boiling point elevation constant is inversely proportional to the size of the molecule, which means that the smaller the molecule, the higher the boiling point elevation constant. Hence, the given amines can be ranked based on the size of their alkyl groups.

The order of the given amines based on the size of their alkyl groups is;

t-butylamine > diethylamine > methylamine > ammonia

The order of the given amines based on the boiling point elevation constant is;

ammonia > methylamine > diethylamine > t-butylamine

Ranking the given solutions based on their molality gives;

ammonia < diethylamine < methylamine < t-butylamine

Hence, the order of the given solutions from lowest to highest bp is;

ammonia < diethylamine < methylamine < t-butylamine

Learn more about boiling point here: https://brainly.com/question/40140.

#SPJ11