If 3.30 ml of vinegar needs 41.0 ml of 0.130 m naoh to reach the equivalence point in a titration, how many grams of acetic acid are in a 1.10 qt sample of this vinegar?

Answers

Answer 1

The amount of acetic acid in a 1.10 qt sample of vinegar is 68.2 g.

To solve this problem, we can use the information from the titration to calculate the number of moles of NaOH used to neutralize the acetic acid in the vinegar. We can then use this information, along with the volume of the vinegar sample and its concentration, to calculate the number of moles of acetic acid in the sample. Finally, we can use the molar mass of acetic acid to convert the number of moles to grams.

First, let's calculate the number of moles of NaOH used in the titration:

n(NaOH) = C(NaOH) x V(NaOH) = 0.130 mol/L x 0.0410 L = 0.00533 mol

Since the stoichiometry of the reaction between acetic acid and NaOH is 1:1, the number of moles of acetic acid in the vinegar sample is also 0.00533 mol.

Next, let's calculate the volume of the vinegar sample in liters:

V(vinegar) = 1.10 qt x (0.946 L/qt) = 1.04 L

Now, we can calculate the concentration of acetic acid in the vinegar sample:

C(acetic acid) = n(acetic acid) / V(vinegar) = 0.00533 mol / 1.04 L = 0.00512 mol/L

Finally, we can use the molar mass of acetic acid (60.05 g/mol) to calculate the mass of acetic acid in the vinegar sample:

mass(acetic acid) = n(acetic acid) x M(acetic acid) = 0.00533 mol x 60.05 g/mol = 0.320 g

Therefore, the amount of acetic acid in a 1.10 qt sample of vinegar is 68.2 g (0.320 g x (1.10 qt / 1 L) x (1 kg / 1000 g) x (2.205 lb / 1 kg)).

learn more about moles here:

https://brainly.com/question/28239680

#SPJ11


Related Questions

what is e° for the reaction 2 au(s) 3 ca²⁺(aq) → 2 au³⁺(aq) 3ca(s)?

Answers

The E°, standard electrode potential, for the reaction 2Au(s) + 3Ca²⁺(aq) → 2Au³⁺(aq) + 3Ca(s) is +4.366 V.

E°, or standard electrode potential, is a measure of the tendency of a species to gain or lose electrons and undergo a reduction or oxidation reaction. In the given reaction, 2Au(s) is being oxidized to Au³⁺(aq) while 3Ca²⁺(aq) is being reduced to Ca(s).

To calculate the E° for this reaction, we need to look up the standard electrode potentials for the two half-reactions and use them to calculate the overall potential difference. The half-reactions are:

Au³⁺(aq) + 3e⁻ → Au(s) E° = +1.498 V
Ca²⁺(aq) + 2e⁻ → Ca(s) E° = -2.868 V

To calculate the E° for the overall reaction, we add the two half-reactions together and cancel out the electrons:

2Au(s) + 3Ca²⁺(aq) → 2Au³⁺(aq) + 3Ca(s)

E° = E°(Au³⁺/Au) - E°(Ca²⁺/Ca)
E° = +1.498 V - (-2.868 V)
E° = +4.366 V

Therefore, the E° for the reaction 2Au(s) + 3Ca²⁺(aq) → 2Au³⁺(aq) + 3Ca(s) is +4.366 V.

More on electrode potential: https://brainly.com/question/17214728

#SPJ11

Identify the items that are consistent with the determination of a rock's numeric age. Multiple select question. Actual age of the rock in thousands, millions, or billions of years Measuring the ratio of K atoms to Ar atoms Determining the mineralogical composition of the rock Noting the rock's position relative to other layers of sedimentary rocks Investigating natural radioactive decay

Answers

The items that are consistent with the determination of a rock's numeric age are:

1. Actual age of the rock in thousands, millions, or billions of years: This involves using various dating methods to determine the precise age of the rock in terms of time.

2. Measuring the ratio of K atoms to Ar atoms: This method, known as potassium-argon dating, is used to determine the age of rocks that contain potassium-bearing minerals by measuring the ratio of potassium to argon isotopes.

3. Investigating natural radioactive decay: Radioactive decay is a process that occurs in certain isotopes, and by measuring the ratio of parent isotopes to daughter isotopes, scientists can determine the age of the rock.

Determining the mineralogical composition of the rock and noting the rock's position relative to other layers of sedimentary rocks are not direct methods for determining numeric age but can provide supporting evidence and contextual information for age determination.

 To  learn  more  about rocks click here:brainly.com/question/19930528

#SPJ11

. Imagine a one-step reaction with a large rate constant (k) and a small equilibrium constant (K) at a particular temperature. Which statement about this reaction must be INCORRECT? a) This reaction must reach equilibrium quickly but nonetheless be reactant favoured at equilibrium. b) This reaction's products must be more thermodynamically stable than its reactants. c) This reaction must have a small activation energy (E.) in the forward direction. d) This reaction must have a large positive standard Gibbs' free energy

Answers

The statement that must be incorrect in this scenario is This reaction must have a large positive standard Gibbs' free energy.

So, the correct answer is D.

A large rate constant (k) implies that the forward reaction is proceeding rapidly, and a small equilibrium constant (K) indicates that the reaction is not favored in the reverse direction.

Therefore, option a) is correct as the reaction would reach equilibrium quickly but still be reactant favored.

Option b) is also correct since the products of the reaction are more thermodynamically stable than the reactants.

Option c) is also true because a small activation energy (E) in the forward direction would allow the reaction to proceed quickly.

However, a large positive standard Gibbs' free energy would indicate that the reaction is not favorable and will not occur spontaneously, which is contradictory to the given scenario.

Hence, the answer of the question is D.

Learn more about chemical reaction at https://brainly.com/question/31648997

#SPJ11

Using the Nernst Equation, what would be the potential of a cell with [Ni2+] = [Mg2+] = 0.10 M? I found that E cell = 2.11 Volts But I don't know what to put for the n of this proble

Answers

To use the Nernst Equation and determine the potential of a cell, we need to know the balanced equation for the cell reaction. Once we have the equation, we can determine the value of "n," which represents the number of electrons transferred in the reaction.

Without the specific balanced equation, it is not possible to determine the value of "n" for this problem. The balanced equation will indicate the stoichiometry of the reaction and the number of electrons involved.

Once you provide the balanced equation, I can help you determine the appropriate value of "n" and calculate the potential of the cell using the Nernst Equation.

To know more about Nernst Equation refer here

https://brainly.com/question/31593791#

#SPJ11

You add 1.00 kg of ethylene glycol (C2H6O2) antifreeze to 4450g of water in your car’s radiator. What are the boiling and freezing points of solution?Kb = 0.512 °C/mKf = 1.86 °C/m

Answers

When a solute, such as ethylene glycol, is added to a solvent, such as water, it affects the boiling and freezing points of the solution.

To calculate these changes, we need to use the equations:
ΔTb = Kb x molality
ΔTf = Kf x molality
where ΔTb is the change in boiling point, Kb is the molal boiling point elevation constant, ΔTf is the change in freezing point, and Kf is the molal freezing point depression constant.
First, we need to find the molality of the solution, which is the moles of solute per kilogram of solvent. The molar mass of ethylene glycol is 62.07 g/mol, so 1.00 kg of ethylene glycol is equal to 16.11 mol. The mass of water is 4.45 kg, so the molality is:
molality = (16.11 mol) / (4.45 kg) = 3.62 mol/kg
Using this molality, we can calculate the changes in boiling and freezing points:
ΔTb = (0.512 °C/m) x (3.62 mol/kg) = 1.85 °C
ΔTf = (1.86 °C/m) x (3.62 mol/kg) = 6.73 °C
The boiling point elevation means that the boiling point of the solution is higher than that of pure water. The boiling point of pure water at standard pressure is 100 °C, so the boiling point of the solution is:
boiling point = 100 °C + 1.85 °C = 101.85 °C
The freezing point depression means that the freezing point of the solution is lower than that of pure water. The freezing point of pure water at standard pressure is 0 °C, so the freezing point of the solution is:
freezing point = 0 °C - 6.73 °C = -6.73 °C
Therefore, the boiling point of the solution is 101.85 °C and the freezing point of the solution is -6.73 °C. It is important to note that adding ethylene glycol to the radiator does not prevent the engine from overheating, but it does lower the freezing point of the coolant and prevent the radiator from freezing in cold temperatures.

To know more about  ethylene glycol visit:

https://brainly.com/question/29293927

#SPJ11

a gas mixture in a 1.40- l container at 297 k contains 10.0 g of ne and 10.0 g of ar . calculate the partial pressure (in atm ) of ne and ar in the container.

Answers

The partial pressure of Ne is 8.78 atm and the partial pressure of Ar is 4.39 atm.

To calculate the partial pressure of ne and are in the container, we first need to determine the moles of each gas present. We can use the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
Given:
Volume (V) = 1.40 L
Temperature (T) = 297 K
Mass of Ne (m) = 10.0 g
Mass of Ar (m) = 10.0 g
We need to determine the number of moles of Ne and Ar. To do this, we can use the molar mass of each gas.
Molar mass of Ne = 20.18 g/mol
Molar mass of Ar = 39.95 g/mol
Number of moles of Ne = mass / molar mass = 10.0 g / 20.18 g/mol = 0.495 mol
Number of moles of Ar = mass / molar mass = 10.0 g / 39.95 g/mol = 0.250 mol
Now that we have the number of moles of each gas, we can use the ideal gas law to calculate the partial pressure of each gas.
For Ne:
n = 0.495 mol
R = 0.0821 L atm/mol K
P = (n * R * T) / V = (0.495 mol * 0.0821 L atm/mol K * 297 K) / 1.40 L = 8.46 atm
For Ar:
n = 0.250 mol
R = 0.0821 L atm/mol K
P = (n * R * T) / V = (0.250 mol * 0.0821 L atm/mol K * 297 K) / 1.40 L = 4.31 atm
Therefore, the partial pressure of Ne in the container is 8.46 atm and the partial pressure of Ar is 4.31 atm.
To calculate the partial pressure of Ne and Ar in the container, we'll use the Ideal Gas Law (PV=nRT) and the formula for partial pressure (P = n/V × RT).
First, we need to determine the moles of Ne and Ar:
Ne: 10.0 g / (20.18 g/mol) = 0.496 moles
Ar: 10.0 g / (39.95 g/mol) = 0.250 moles
Now, we can calculate the partial pressures for each gas:
Ne: (0.496 moles) / (1.40 L) × (0.0821 L atm/mol K) × (297 K) = 8.78 atm
Ar: (0.250 moles) / (1.40 L) × (0.0821 L atm/mol K) × (297 K) = 4.39 atm

To know more about partial visit :-

https://brainly.com/question/16048157

#SPJ11

A voltaic cell is constructed in which the following cell reaction occurs. The half-cell compartments are connected by a salt bridge 3Sn2*(aq) + 2Cr(s)3Sn(s) + 2Cr3(aq)

Answers

The standard cell potential for the given voltaic cell is -0.74 V.

The reduction potentials for [tex]Sn2+(aq) + 2e- - > Sn(s)[/tex] and [tex]Cr3+(aq) + 3e- - > Cr(s)[/tex] are -0.14 V and -0.74 V, respectively,

while the oxidation potential [tex]Sn(s) - > Sn2+(aq) + 2e-[/tex] is -0.14 V.

We need to use the formula:

E°cell = E°reduction (cathode) - E°reduction (anode)

By adding the reduction potential of Sn2+ to the oxidation potential of Sn, we can obtain the reduction potential for [tex]Sn_2+ + 2e- - > Sn:[/tex]

[tex]Sn_2+(aq) + 2e-[/tex] → Sn(s) E°red = -0.14 V

Sn(s) → [tex]Sn_2[/tex]+(aq) + 2e- E°ox = +0.14 V

[tex]Sn_2+(aq)[/tex] + 2e- → Sn(s) E°red = 0.00 V

The standard reduction potential  [tex]Cr_3+ + 3e- - > Cr[/tex]is -0.74 V.

Now, we can calculate the standard cell potential:

E°cell = E°reduction (cathode) - E°reduction (anode)

E°cell = (-0.74 V) - (0.00 V)

E°cell = -0.74 V

To know more about standard cell potential, here

brainly.com/question/29653954

#SPJ4

--The complete Question is, What is the standard cell potential for a voltaic cell constructed with a Sn-Cr half-cell and a Sn3+-Cr3+ half-cell, connected by a salt bridge, where the reaction is 3Sn2+(aq) + 2Cr(s) → 3Sn(s) + 2Cr3+(aq)? --

what is the ph at the equivalence point of a weak base-strong acid titration if 20.00 ml of naocl requires 28.30 ml of 0.50 m hcl? ka = 3.0 × 10-8 for hocl.

Answers

The pH at the equivalence point of a weak base-strong acid titration can be determined using the Henderson-Hasselbalch equation.

In this case, the weak base is sodium hypochlorite (NaOCl), and the strong acid is hydrochloric acid (HCl). Given that 20.00 mL of NaOCl requires 28.30 mL of 0.50 M HCl, we can calculate the moles of HCl used. The balanced chemical equation for the reaction between NaOCl and HCl is: NaOCl + HCl → HClO + NaCl. Since the molar ratio between NaOCl and HCl is 1:1, the moles of HCl used is equal to the moles of NaOCl used. By dividing the moles of HCl used by the total volume of the NaOCl solution (20.00 mL), we can determine the concentration of HCl. Next, we can use the dissociation constant (Ka) of HClO (the conjugate acid of NaOCl) to calculate the concentration of HClO at the equivalence point. From the balanced chemical equation, we know that one mole of NaOCl reacts with one mole of HCl to form one mole of HClO. Therefore, the concentration of HClO is equal to the concentration of HCl at the equivalence point. Finally, using the Henderson-Hasselbalch equation, we can calculate the pH at the equivalence point by plugging in the values for the concentration of HClO and the Ka of HClO. It is important to note that in this specific case, the concentration of HClO will be very low due to the weak acid nature of HClO. Consequently, the pH at the equivalence point will be acidic.

Learn more about Henderson-Hasselbalch equation here:

https://brainly.com/question/31495136

#SPJ11

Using your periodic table and calculator as needed, answer the following question. How many moles are in 11. 2 liters of hydrogen gas at STP?


Group of answer choices

Answers

There are 0.454 moles of hydrogen gas in 11.2 liters of hydrogen gas at STP.

To calculate the number of moles in 11.2 liters of hydrogen gas at STP, we need to use the ideal gas law, which states thatPV = nRT where: P is the pressure of the gas in atmospheres (atm)V is the volume of the gas in liters (L)n is the number of moles of the gas R is the ideal gas constant (0.0821 L·atm/mol·K)T is the temperature of the gas in Kelvin (K)At STP (standard temperature and pressure), the pressure is 1 atm and the temperature is 273 K. Therefore, we can rewrite the ideal gas law as: PV = nRT1 atm · 11.2 L = n · 0.0821 L·atm/mol·K · 273 Kn = (1 atm · 11.2 L) / (0.0821 L·atm/mol·K · 273 K)n = 0.454 molSo, there are 0.454 moles of hydrogen gas in 11.2 liters of hydrogen gas at STP.

Learn more about hydrogen gas here:

https://brainly.com/question/14355155

#SPJ11

determine the mass of potassium in 31.0 g g of kcl k c l .

Answers

We first need to know the percent composition of potassium in KCl. KCl contains one atom of potassium (K) and one molecule of chloride (Cl). The molar mass of KCl is 74.55 g/mol, and the molar mass of potassium is 39.10 g/mol. The mass of potassium in 31.0 g of KCl is 16.23 g.

To find the percent composition of potassium in KCl, we can use the formula:
% composition = (mass of element / total mass of compound) x 100%
% composition of K = (39.10 g/mol / 74.55 g/mol) x 100% = 52.36%
So, 52.36% of the mass of KCl is potassium.
To determine the mass of potassium in 31.0 g of KCl, we can use the following calculation:
mass of K = % composition of K x total mass of compound
mass of K = 52.36% x 31.0 g = 16.23 g
Therefore, the mass of potassium in 31.0 g of KCl is 16.23 g.

Learn more about mass at

brainly.com/question/19694949

#SPJ11

propose a synthesis starting with ethanol and ethyl butanoate

Answers

One possible synthesis starting with ethanol and ethyl butanoate is:

1. Convert ethanol to ethene via dehydration reaction using sulfuric acid as a catalyst.

2. React ethene with hydrogen gas in the presence of a nickel catalyst to form butane.

3. React butane with carbon monoxide in the presence of a rhodium catalyst to form butyraldehyde.

4. React butyraldehyde with ethanol to form 2-ethyl butyraldehyde.

5. Convert 2-ethyl butyraldehyde to ethyl butanoate via reaction with methanol and hydrochloric acid.

The synthesis involves a series of reactions starting with ethanol and ethyl butanoate, which are readily available starting materials. Ethanol can be dehydrated using sulfuric acid as a catalyst to produce ethene.

Ethene can be hydrogenated to form butane, which can then be converted to butyraldehyde via a rhodium-catalyzed reaction with carbon monoxide.

Butyraldehyde can then react with ethanol to form 2-ethyl butyraldehyde, which can be converted to ethyl butanoate via reaction with methanol and hydrochloric acid.

This synthesis demonstrates the versatility of these starting materials and the usefulness of catalytic reactions in organic synthesis.

To know more about "Catalyst" refer here:

https://brainly.com/question/30772559#

#SPJ11

Hey need some help ASAP.

Adult humans have 24 vertebrae in their spinal column. How are these bones classified?

A. long bone

B. irregular bone

C. flat bone

D. short bone

Answers

The vertebrae in the human spinal column are classified as irregular bones. Option B is correct.

Irregular bones have complex shapes that do not fit into other bone classification categories. The vertebrae are irregular because they have a unique structure and shape that allows them to interlock and articulate with each other to form the spinal column.

The spinal column is divided into different regions, including the cervical, thoracic, lumbar, sacral, and coccygeal regions, and each region has a distinct number of vertebrae with specific characteristics. The vertebrae consist of a body, vertebral arch, and various processes for muscle and ligament attachment.

The spinal cord runs through a central canal in the vertebral arch, and nerves branch out between the vertebrae to various parts of the body. Overall, the irregular shape of the vertebrae is critical for providing flexibility, support, and protection to the spinal cord and the body. Option B is correct.

To know more about the Vertebrae, here

https://brainly.com/question/1916134

#SPJ1

for a chemical reaction, the rate constant at 45.61 °c is 0.004545 s‑1, while the rate constant at 58.78 °c is 0.017347 s‑1. calculate the activation energy in kj/mol.

Answers

The activation energy for the given chemical reaction is 83.3 kJ/mol.

How to find the activation energy?

The activation energy of a chemical reaction can be calculated using the Arrhenius equation which relates the rate constant of a reaction with temperature and activation energy. By knowing the rate constants at two different temperatures, we can calculate the activation energy of the reaction.

The Arrhenius equation is given by: k = A * exp(-Ea/RT)

where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.

In this case, we are given the rate constants at two different temperatures, which allows us to calculate the activation energy of the reaction.

By taking the natural logarithm of the Arrhenius equation at both temperatures and subtracting the resulting equations, we can obtain the activation energy.

By using the given data and solving the equation, we find that the activation energy for the reaction is 83.3 kJ/mol.

Learn more about Arrhenius equation

brainly.com/question/24375075

#SPJ11

Calculate the ratio of ch3nh2ch3nh2 to ch3nh3clch3nh3cl required to create a buffer with phphph = 10.30.

Answers

To calculate the ratio of CH3NH2/CH3NH3Cl required to create a buffer with a pH of 10.30, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

Where:

pH is the desired pH (10.30 in this case)

pKa is the dissociation constant of the weak acid (CH3NH3Cl)

[A-] is the concentration of the conjugate base (CH3NH2)

[HA] is the concentration of the weak acid (CH3NH3Cl)

First, we need to find the pKa value for CH3NH3Cl. The pKa of CH3NH3Cl is given by the negative logarithm of the acid dissociation constant (Ka) for CH3NH3+:

pKa = -log(Ka)

If we assume that the pKa of CH3NH3Cl is 10.30 (since the pH and pKa are the same in a buffer solution), we can calculate the ratio of [A-]/[HA] using the Henderson-Hasselbalch equation:

10.30 = 10.30 + log([A-]/[HA])

Subtracting 10.30 from both sides:

0 = log([A-]/[HA])

Taking the antilog (exponentiating both sides) with base 10:

10^0 = [A-]/[HA]

Simplifying:

1 = [A-]/[HA]

Therefore, the ratio of CH3NH2/CH3NH3Cl required to create a buffer with pH 10.30 is 1:1.

To know more about CH3NH2/CH3NH3Cl refer here

https://brainly.com/question/8328418#

#SPJ11

the ________ ion has eight valence electrons. a) sc3. b) ti3. c) cr3. d) v3. e) mn3.

Answers

The mn3 ion has eight valence electrons.

Mn3+ ion has eight valence electrons. The element manganese (Mn) has an atomic number of 25, which means it has 25 electrons in total. When it loses three electrons, it forms the Mn3+ ion, which means it has 22 electrons. Mn has five valence electrons, but when it loses three electrons to form Mn3+, it has eight valence electrons. Valence electrons are the outermost electrons in an atom and play a crucial role in chemical bonding. Mn3+ ion has a charge of +3 since it has lost three electrons.
The Scandium (Sc3+) has eight valence electrons. Scandium (Sc) has an atomic number of 21 and is in group 3 of the periodic table. In its neutral state, Sc has 21 electrons. When it forms a +3 ion, it loses three electrons, leaving it with 18 electrons. Since Sc is in the fourth period, it has four electron shells, and the third shell serves as the valence shell. The third electron shell can hold a maximum of 18 electrons, and in the case of Sc3+, it has 8 valence electrons.

To know more about eight valence electrons visit:

https://brainly.com/question/7972997

#SPJ11

The .mn3 ion has eight valence electrons. The manganese ion has eight valence electrons in its outermost energy level.

This is because manganese has five electrons in its 3d orbital and three electrons in its 4s orbital, giving it a total of eight valence electrons. When manganese loses three electrons to become a 3+ ion, it retains the same electron configuration in its outermost energy level. This makes it easier for manganese to form chemical bonds with other atoms, as it is more likely to gain or lose electrons in order to achieve a full outer shell of electrons.

Manganese is a transition metal and is found in many minerals, including pyrolusite, rhodochrosite, and manganite. It is also an essential nutrient for many living organisms, including humans. Manganese plays a key role in many biological processes, including bone formation, wound healing, and the metabolism of carbohydrates and amino acids.

To know more about valence electrons visit

https://brainly.com/question/7972997

#SPJ11

How many moles of oxygen(02) are needed to produce 4. 6 g of nitrogen monoxide (NO)?
3. 36 mol
0. 768 mol
0. 233 mol
0. 192 mol
How many moles of ammonía (NH3) are needed if 2. 75 moles of water (H20) were produced? 4. 13 mol
1. 83 mol
4 mol
6. 8 mol
(equation in photo)​

Answers

For the first question, 0.233 mol of oxygen (O2) is needed to produce 4.6 g of nitrogen monoxide (NO). For the second question, 6.8 mol of ammonia (NH3) is needed if 2.75 moles of water (H2O) were produced.

To calculate the number of moles of a substance, we need to use the molar mass. The molar mass of NO is 30.01 g/mol. By dividing 4.6 g by the molar mass, we get 0.153 mol of NO. Since the balanced equation for the reaction is 2 NO + O2 → 2 NO2, we know that the molar ratio between NO and O2 is 1:1. Therefore, we need the same amount of moles of O2, which is 0.153 mol. However, this value is not among the given options. To find the nearest option, we can round it to the nearest hundredth, which is 0.16 mol. Thus, the closest option is 0.233 mol, which is the correct answer.

For the second question, we need to use the balanced equation for the reaction: 4 NH3 + 5 O2 → 4 NO + 6 H2O. The molar ratio between water and ammonia is 6:4, which means for every 6 moles of water produced, 4 moles of ammonia are needed. Given that 2.75 moles of water were produced, we can calculate the moles of ammonia needed by multiplying 2.75 by 4/6, which equals 1.83 mol. The closest option is 1.83 mol, which is the correct answer.

To learn more about nitrogen monoxide click here

brainly.com/question/30459910

#SPJ11

describe how you would make 1000 ml of a 0.700 m naoh solution from a 12.0 m stock naoh solution.

Answers

We, need to measure 58.3 ml of the 12.0 M stock NaOH solution and dilute it with distilled water to a final volume of 1000 ml to obtain a 0.700 M NaOH solution.

To make 1000 ml of a 0.700 M NaOH solution from a 12.0 M stock NaOH solution, you can use the following formula;

M₁V₁ = M₂V₂

where M₁ is concentration of the stock solution, V₁ is the volume of stock solution needed, M₂ is desired concentration of the new solution, and V₂ is final volume of the new solution.

Substituting the values given in the problem;

M₁ = 12.0 M

M₂ = 0.700 M

V₂ = 1000 ml = 1.0 L

Solving for V₁;

M₁V₁ = M₂V₂

12.0 M × V₁ = 0.700 M × 1.0 L

V₁ = (0.700 M × 1.0 L) / 12.0 M

V₁ = 0.0583 L or 58.3 ml

Therefore, you need to measure 58.3 ml of the 12.0 M stock NaOH solution and dilute it with distilled water to a final volume of 1000 ml to obtain a 0.700 M NaOH solution.

To know more about stock solution here

https://brainly.com/question/28083950

#SPJ4

An atom of 130Sn has a mass of 129.913920 amu. Calculate the binding energy in MeV per NUCLEON. Use the masses: mass of 1H atom = 1.007825 amu mass of a neutron = 1.008665 amu 1 amu = 931.5 MeV Give your answer to 3 significant figures and DO NOT use E notation. No charity points will be awarded.......

Answers

The binding energy in MeV per NUCLEON for an atom of 130Sn is 8.536 MeV/nucleon. The mass per nucleon is the mass of the nucleus divided by the number of nucleons.

First, we need to calculate the total mass of the atom of 130Sn. This can be done by adding the masses of the protons and neutrons in the nucleus. The number of protons in an atom is equal to its atomic number, which is 50 for tin (Sn). The number of neutrons can be found by subtracting the atomic number from the mass number, which is 130 for this isotope. So, the total number of nucleons (protons + neutrons) in 130Sn is 130.

Determine the total number of protons and neutrons in 130Sn.
Sn has an atomic number of 50, meaning it has 50 protons. Since the mass number is 130, there are 80 neutrons (130 - 50).
2. Calculate the total mass of separate protons and neutrons.
Total mass of protons = 50 protons * 1.007825 amu/proton = 50.39125 amu
Total mass of neutrons = 80 neutrons * 1.008665 amu/neutron = 80.6932 amu
3. Find the mass defect.
Mass defect = (Total mass of protons and neutrons) - (Mass of 130Sn)
Mass defect = (50.39125 amu + 80.6932 amu) - 129.913920 amu = 1.17053 amu
4. Convert the mass defect to energy.
Energy = mass defect * conversion factor
Energy = 1.17053 amu * 931.5 MeV/amu = 1090.778095 MeV
5. Calculate the binding energy per nucleon.
Binding energy per nucleon = Total binding energy / Total number of nucleons
Binding energy per nucleon = 1090.778095 MeV / 130 nucleons = 8.55 MeV (to 3 significant figures).

To know more about atom visit:

https://brainly.com/question/30898688

#SPJ11

Which trial number from the following data set should produce the most amount of heat (energy) in joules in our acid-base neutralization calorimetry experiment? hint: see your data or do stoichiometric calculations using balanced reaction. Trial number volume of phosporic acid added (ml) volume of sodium hydroxide added (ml) 1 10. 0 10. 2000 2 15. 0 5. 2000 3 5. 0 15. 0

Answers

Trial 2 should produce the most amount of heat (energy) in joules in the acid-base neutralization calorimetry experiment.

To determine which trial number should produce the most amount of heat (energy) in joules in the acid-base neutralization calorimetry experiment, we need to consider the stoichiometry of the reaction between phosphoric acid (H3PO4) and sodium hydroxide (NaOH).

The balanced chemical equation for the reaction between H3PO4 and NaOH is as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

From the equation, we can see that the stoichiometric ratio between H3PO4 and NaOH is 1:3. This means that for every 1 mole of H3PO4, we need 3 moles of NaOH to completely react.

Now let's analyze the given data set:

Trial 1: Volume of phosphoric acid added = 10.0 mL, Volume of sodium hydroxide added = 10.0 mL

Trial 2: Volume of phosphoric acid added = 15.0 mL, Volume of sodium hydroxide added = 5.0 mL

Trial 3: Volume of phosphoric acid added = 5.0 mL, Volume of sodium hydroxide added = 15.0 mL

To determine the trial that produces the most heat, we need to calculate the moles of each reactant in each trial and compare them.

Trial 1:

Moles of H3PO4 = (10.0 mL / 1000 mL) * (0.2000 mol/L) = 0.002 mol

Moles of NaOH = (10.0 mL / 1000 mL) * (0.2000 mol/L) = 0.002 mol

Trial 2:

Moles of H3PO4 = (15.0 mL / 1000 mL) * (0.2000 mol/L) = 0.003 mol

Moles of NaOH = (5.0 mL / 1000 mL) * (0.2000 mol/L) = 0.001 mol

Trial 3:

Moles of H3PO4 = (5.0 mL / 1000 mL) * (0.2000 mol/L) = 0.001 mol

Moles of NaOH = (15.0 mL / 1000 mL) * (0.2000 mol/L) = 0.003 mol

From the calculations, we can see that Trial 2 has the highest number of moles of both H3PO4 and NaOH. Therefore, Trial 2 should produce the most amount of heat (energy) in joules in the acid-base neutralization calorimetry experiment.

Learn more about acid-base neutralization from the link given below.

https://brainly.com/question/31591186

#SPJ4

calculate the [ki] for run a3 in item 3 of part i in your lab assignment. you will need the volumes in table a in the experimental. t assume that the [ki] for the stock solution is 0.20m.

Answers

The concentration of [KI] will be 0.080 M

Assuming that the [Ki] for the stock solution is 0.20 M, the concentration of KI that would result when the contents of Beaker #2 are mixed with the contents of Beaker #1 in Run #2 in Table 1 of this experiment is 0.25 M.

This is because Beaker #2 contains 0.2 M KI and Beaker #1 contains 0.05 M KI. When the contents of these two beakers are added together, the total concentration of KI is 0.25 M. This is because the concentration of a solution is determined by the amount of solute present divided by the total volume of the solution.

For run 3

initial conc. of KI M₁ = 0.20 M

Volume of KI = 20mL

Total volume = 20mL + 10m L+ 20mL 50mL

Cone of  KI =1 M, V₁ / total volume

(0.20m) (20mL) /50mL

Cone. of KI = 0.08M

Therefore, Cone. of KI  will be 0.08M

To know more about concentration here

https://brainly.com/question/13872928

#SPJ4

The question is incomplete, the complete question is:

calculate the [ki] for run a3 in item 3 of part i in your lab assignment. you will need the volumes in table a in the experimental. t assume that the [ki] for the stock solution is 0.20m.

Aniline is to be cooled from 200 to 150°F in a double-pipe heat exchanger. For cooling, a stream of toluene amounting to 8600 lb/hr at a temperature of 100°Fis available. The exchanger consists of 1 1/4-in Schedule 40 pipe inside a 2-in Schedule 40 pipe. The aniline flow rate is 10,000 lb/hr. The overall heat-transfer coefficient based on the outside area is given as 100 BTUhr ft °F. (a) If flow is countercurrent, what are the toluene outlet temperature, the LMTD (i.e. ATLM), and the heat transfer area needed to do this job? (b) What are they if flow is parallel? You need to look up any physical properties that are required.

Answers

In a double-pipe heat exchanger, aniline can be cooled by toluene, with different outlet temperatures for countercurrent and parallel flow.

In this scenario, aniline needs to be cooled from 200°F to 150°F using toluene as the cooling agent.

The flow rate of aniline is 10,000 lb/hr, and a stream of toluene at 8600 lb/hr and 100°F is available.

The heat exchanger is made up of 1 1/4-in Schedule 40 pipe inside a 2-in Schedule 40 pipe, and the overall heat-transfer coefficient based on the outside area is 100 BTUhr ft °F. For countercurrent flow, the toluene outlet temperature is 165°F, the LMTD is 52.67°F, and the heat transfer area needed is 17.06 ft².

For parallel flow, the toluene outlet temperature is 162.5°F, the LMTD is 53.14°F, and the heat transfer area needed is 18.22 ft².

Physical properties like heat capacities and viscosities need to be looked up to calculate these values.

For more such questions on heat, click on:

https://brainly.com/question/30738335

#SPJ11

For countercurrent flow, the toluene outlet temperature is 162.5°F, the LMTD is 41.3°F, and the required heat transfer area is [tex]184.5 ft^2[/tex].

For parallel flow, the toluene outlet temperature is 173.4°F, the LMTD is 34.3°F, and the required heat transfer area is [tex]237.2 ft^2.[/tex].

In a double-pipe heat exchanger, the two fluids flow in separate pipes with one inside the other. The heat transfer occurs through the wall of the inner pipe.

The LMTD is used to calculate the heat transfer rate and is dependent on the temperature difference between the two fluids. Countercurrent and parallel flow are two configurations used in heat exchangers.

In countercurrent flow, the two fluids flow in opposite directions, while in parallel flow, they flow in the same direction. The required heat transfer area depends on the overall heat-transfer coefficient, the LMTD, and the mass flow rates of the fluids.

In this problem, the required heat transfer area is calculated for both countercurrent and parallel flow, along with the toluene outlet temperature and LMTD. Physical properties such as the specific heat and density of the fluids are required for these calculations.

Learn more about toluene here :

https://brainly.com/question/29899857

#SPJ11

A generic salt, AB3 , has a molar mass of 333 g/mol and a solubility of 6.50 g/L at 25 °C. What is the Ksp of this salt at 25 °C? AB3(s)↽−−⇀A3+(aq)+3B−(aq) Ksp=

Answers

The Ksp of AB3 at 25 °C is 1.19 × 10^-8.

This means that at equilibrium, the product of the concentrations of A3+ and B- ions raised to the power of their stoichiometric coefficients is equal to the Ksp value, indicating a saturated solution of AB3 at 25 °C.

The molar solubility of AB³ can be calculated as follows:

Molar solubility = (6.50 g/L) / (333 g/mol) = 0.0195 mol/L

Since the stoichiometry of the salt is AB3, the equilibrium concentrations of A3+ and B- ions are equal to three times the molar solubility:

[A3+] = 3(0.0195) = 0.0585 mol/L

[B-] = 3(0.0195) = 0.0585 mol/L

The Ksp expression for the dissociation of AB3 is:

Ksp = [A3+][B-]^3

Substituting the equilibrium concentrations gives:

Ksp = (0.0585 mol/L)(0.0585 mol/L)^3 = 1.19 × 10^-8

To know more about "Stoichiometry" refer here:

https://brainly.com/question/28780091#

#SPJ11

What would be the reagents that you would use to convert 3-pentanone into 3-hexanone?

Answers

To convert 3-pentanone into 3-hexanone, the reagent that can be used is lithium aluminum hydride (LiAlH4) followed by oxidation with sodium dichromate (Na2Cr2O7) or potassium permanganate (KMnO4). T

he reduction with LiAlH4 will convert the ketone group of 3-pentanone into a secondary alcohol, which can then be oxidized using Na2Cr2O7 or KMnO4 to yield 3-hexanone.

To convert 3-pentanone into 3-hexanone, you would use the following reagents and steps:

1. First, perform a Grignard reaction. Use ethylmagnesium bromide (C2H5MgBr) as the Grignard reagent, and diethyl ether as the solvent. This will add an ethyl group to the carbonyl carbon of 3-pentanone, forming a tertiary alcohol.

2. Next, carry out an oxidation reaction using pyridinium chlorochromate (PCC) as the oxidizing agent to convert the tertiary alcohol back into a ketone. This will yield the desired product, 3-hexanone.

So, the reagents you would use to convert 3-pentanone into 3-hexanone are ethylmagnesium bromide (C2H5MgBr), diethyl ether, and pyridinium chlorochromate (PCC).

To know more about Reagent visit:

https://brainly.com/question/31228572

#SPJ11

Even though B contains three ester groups, a single Dieckmann product results when B is treated with NaOCH, in CH,OH, followed by H,0+. OCH, H.COM Part 1: Why is only one product formed from B? Only esters with 2 or 3 H's on the a carbon form enolates that undergo Claisen reaction to form resonance-stabilized enolates of the product keto ester. Thus, the enolate forms on the CH to one ester carbonyl, and cyclization yields a five-membered "ring. Part 2 out of 2 Draw the structure of the product formed. OCH, NaOCH Report problem CH, OH Hint draw structure... Solution

Answers

The structure of the product will have a five-membered ring containing the keto ester and two remaining ester groups in the molecule.

The product formed from B when treated with NaOCH in CH3OH, followed by H3O+ is a cyclic keto ester called 5-methyl-2-oxocyclopentylacetate. The structure is as follows:
CH3OCH2C(=O)CH2C(=O)OCH3
The enolate forms on the CH to one ester carbonyl, and cyclization yields a five-membered ring.
Part 1: Only one product is formed from B because only esters with 2 or 3 hydrogens on the alpha carbon can form enolates that undergo the Claisen reaction, leading to resonance-stabilized enolates of the product keto ester. In this case, the enolate forms on the CH adjacent to one ester carbonyl, and cyclization occurs, resulting in a five-membered ring.
Part 2: To draw the structure of the product formed, follow these steps:
1. Identify the ester group in B with 2 or 3 hydrogens on the alpha carbon.
2. Form an enolate by deprotonating the alpha carbon with NaOCH3 (the base).
3. Undergo a Claisen reaction: the enolate will attack the carbonyl carbon of another ester group in B.
4. Form a resonance-stabilized enolate of the product keto ester.
5. Cyclize the molecule to form a five-membered ring by forming a new bond between the alpha carbon and the carbonyl carbon.
6. Protonate the enolate oxygen with H3O+ to form the final product.
The structure of the product will have a five-membered ring containing the keto ester and two remaining ester groups in the molecule.

For more such questions on keto ester , Visit:

https://brainly.com/question/9559044

#SPJ11

Hi there! Based on your provided information, let's analyze the reaction:

Part 1: Only one product is formed from compound B because the Dieckmann condensation specifically occurs when an ester has two or three hydrogens on the alpha carbon (CH2 or CH3), allowing it to form an enolate ion that undergoes the Claisen reaction. In this case, the enolate forms on the CH2 adjacent to one ester carbonyl, leading to cyclization and a resonance-stabilized enolate of the product keto ester. This process generates a five-membered ring.

Part 2: As a text-based AI, I cannot draw the product's structure. However, I can describe it to you. The product will have a five-membered ring with a keto ester moiety, which will contain a carbonyl group (C=O) adjacent to the ester group (C-O-R) within the ring.

To know more about Deickmann condensation, click here :

brainly.com/question/31180665

#SPJ11

which of the following is a water contaminant that can cause acid mine drainage? a methane b carbon dioxide c flux d sulfuric acid

Answers

The water contaminant that can cause acid mine drainage is sulfuric acid.

Acid mine drainage is a significant environmental issue that occurs when sulfide minerals, typically found in mines or mining waste, come into contact with water and air. The sulfide minerals react with oxygen and water to form sulfuric acid.

This acidic solution then leaches out other minerals and metals from the surrounding rocks, resulting in highly acidic and metal-rich water. While methane, carbon dioxide, and flux (a material used in metal smelting) may be present in mining environments, they are not directly responsible for causing acid mine drainage.

Methane is a flammable gas, carbon dioxide is a greenhouse gas, and flux is a material used to facilitate metal melting.

Therefore, they do not directly contribute to the formation of acidic mine drainage. Sulfuric acid is the primary contaminant responsible for the acidification of water in mining areas.

To learn more about sulfuric acid from the given link

https://brainly.com/question/10220770

#SPJ4

3. when struck with light of a sufficient energy, what are some likely outcomes of the photochemical decomposition of silver chloride? write chemical reactions.

Answers

Outcomes of the photochemical decomposition of silver chloride are Formation of silver (Ag) and chlorine (Cl2) gas and Production of silver and other silver chloride complexes.

When silver chloride (AgCl) is struck with light of sufficient energy, it undergoes a photochemical decomposition reaction. Some likely outcomes of this process are:

1. Formation of silver (Ag) and chlorine (Cl2) gas:
AgCl (solid) + light energy → Ag (solid) + 1/2 Cl2 (gas)

2. Production of silver and other silver chloride complexes, depending on the environment and the presence of other ions:
AgCl (solid) + light energy → Ag (solid) + Cl- (aqueous)

In both reactions, the key factor is that light energy is absorbed by the silver chloride, causing its decomposition into silver and either chlorine gas or other silver chloride complexes.

For more questions on photochemical decomposition:

https://brainly.com/question/17110487

#SPJ11

Outcomes of the photochemical decomposition of silver chloride are Formation of silver (Ag) and chlorine (Cl2) gas and Production of silver and other silver chloride complexes.

When silver chloride (AgCl) is struck with light of sufficient energy, it undergoes a photochemical decomposition reaction. Some likely outcomes of this process are:1. Formation of silver (Ag) and chlorine (Cl2) gas:AgCl (solid) + light energy → Ag (solid) + 1/2 Cl2 (gas)2. Production of silver and other silver chloride complexes, depending on the environment and the presence of other ions: AgCl (solid) + light energy → Ag (solid) + Cl- (aqueous)In both reactions, the key factor is that light energy is absorbed by the silver chloride, causing its decomposition into silver and either chlorine gas or other silver chloride complexes.

Learn more about photochemical decomposition here :

brainly.com/question/17110487

#SPJ11

How many grams of lithium nitrate, LINO3 , will be


needed to make 5. 31 grams of lithium sulfate, Li2SO4,


assuming that you have an adequate amount of lead(IV)


sulfate, Pb(SO4)2, to do the reaction? Round your final


answer to the tenth place, 1 decimal, and NO UNITS.

Answers

To determine the grams of lithium nitrate (LiNO3) needed to produce 5.31 grams of lithium sulfate (Li2SO4), we need to compare the molar masses and stoichiometry of the two compounds.

The balanced chemical equation for the reaction is:
3 LiNO3 + Pb(SO4)2 → 2 Li2SO4 + Pb(NO3)4

From the equation, we can see that 3 moles of LiNO3 react to produce 2 moles of Li2SO4.

To calculate the grams of LiNO3 needed, we can use the following steps:
1. Convert the given mass of Li2SO4 to moles using its molar mass.
2. Set up the mole ratio between LiNO3 and Li2SO4 from the balanced equation.
3. Use the mole ratio to calculate the moles of LiNO3 needed.
4. Convert the moles of LiNO3 to grams using its molar mass.

By following these steps and using the appropriate values, we can find the grams of LiNO3 required to produce 5.31 grams of Li2SO4.

 To  learn  more  about equation click here:brainly.com/question/29657983

#SPJ11

2. What could you do to make sure the law of conservation of mass is shown?

Answers

Answer:

To ensure the law of conservation of mass is demonstrated, you can conduct an experiment that involves a chemical reaction where the total mass of the reactants is equal to the total mass of the products. Here's an example experiment showcasing this principle:

Materials needed:

- A balance or scale

- Two clear containers

- Baking soda (sodium bicarbonate)

- Vinegar (acetic acid)

- A balloon

Procedure:

1. Set up the balance or scale and make sure it is calibrated properly.

2. Place one of the clear containers on the balance and record its mass.

3. Add a measured amount of baking soda to the container and record the new total mass.

4. Attach the balloon to the mouth of the container without allowing any gas to escape.

5. Carefully pour a measured amount of vinegar into the balloon through the container's opening without mixing it with the baking soda.

6. Observe the reaction between the vinegar and baking soda. The reaction will produce carbon dioxide gas, which will inflate the balloon.

7. Once the reaction is complete and the balloon has stopped inflating, carefully remove it from the container.

8. Place the second clear container on the balance and record its mass.

9. Pour the contents of the balloon (carbon dioxide gas) into the second container.

10. Weigh the second container with the carbon dioxide gas and record the new total mass.

Observation and Conclusion:

By comparing the initial mass of the baking soda and the vinegar with the final mass of the carbon dioxide gas and the container, you will observe that the total mass of the reactants (baking soda and vinegar) is equal to the total mass of the products (carbon dioxide gas and container). This demonstrates the law of conservation of mass, which states that mass cannot be created or destroyed in a chemical reaction, only rearranged.

By carefully measuring the masses before and after the reaction, you visually and quantitatively show that the total mass remains constant throughout the process. This experiment reinforces the fundamental principle of the law of conservation of mass, emphasizing that matter is conserved in chemical reactions, even when it undergoes changes in form or state.

1.00 mL of water at 25 C is heated to 100 C, at which point it boils at an atmospheric pressure of 1 atm and is vaporized. What is the difference in volume (in mL) when this happens? (At 25 C, liquid water has a density of 0.997 g/mL.)

Answers

1.00 mL of water at 25°C is heated to 100°C, where it boils at 1 atm air pressure and is vaporized. The volume difference is 1989 mL.

The volume difference between liquid water and steam at 100°C can be calculated using the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

Assuming the water behaves as an ideal gas, we can use the equation to calculate the volume of water vapor produced:

n = m/M, where m is the mass of the water and M is the molar mass of water.

m = 1.00 mL x 0.997 g/mL = 0.997 g

M = 18.015 g/mol

n = 0.997 g / 18.015 g/mol = 0.0553 mol

The initial pressure is 1 atm and the final pressure is also 1 atm, since the water is boiling at atmospheric pressure. We also know that the temperature is 100°C = 373 K.

Using the ideal gas law, we can solve for the final volume:

V = nRT/P = (0.0553 mol)(0.08206 L·atm/(mol·K))(373 K)/(1 atm) = 1.99 L

Therefore, the difference in volume is:

1.99 L - 0.001 L = 1.989 L = 1989 mL

The volume of the water vapor is much larger than the volume of the liquid water, which is why steam can cause explosions if confined in a closed container.

To know more about the Density, here

https://brainly.com/question/15966885

#SPJ4

Determine the molality of a solution prepared by dissolving 1.50 moles of bacl2.

Answers

The molality of the solution prepared by dissolving 1.50 moles of BaCl₂ in 1 kg of solvent is 1.50 mol/kg.

Molality is defined as the number of moles of solute dissolved per kilogram of solvent. Therefore, to determine the molality of a solution prepared by dissolving 1.50 moles of BaCl₂, we need to know the mass of the solvent used to dissolve the solute.

Assuming we use 1 kg of solvent, we can calculate the molality of the solution as follows:

Molality = moles of solute / mass of solvent (in kg)

Since we dissolved 1.50 moles of BaCl₂, the molality would be:

Molality = 1.50 moles / 1 kg = 1.50 mol/kg

Therefore, the molality of the solution prepared by dissolving 1.50 moles of BaCl₂ in 1 kg of solvent is 1.50 mol/kg. It's important to note that molality is different from molarity, which is defined as the number of moles of solute dissolved per liter of solution.

To know more about molality, refer to the link below:

https://brainly.com/question/30909953#

#SPJ11

Other Questions
An example of a customer-value-added activity is: Select one: a. shortening the customers' billing cycle. b. final painting and polishing of the product c. installation of a computerized human resource management module d. maintenance of an adequate safety stock e. addition of an employee hotline for workplace complaints ? who is currently the oldest player to score a world cup goal? X Y start 1 start 1 start 0 Implicitly, each process has two states (before the transition, and after). Now, the other class 1 RunSyncTransitions.java (along with SyncTransition.java and Controller.java) differs from the above only in that it forces the processes to run always in the order: X, Y, Z (try out the attached code). For each of RunTransitions.java and RunSyncTransitions. 5.java: (a) How many states does the corresponding composition of processes have? (b) How many traces does this composition have? (c) What (3D) structure (or shape) does this composition form? with the picture, above what establishment you think that is famous among the teenagers nowadays? give example and explain your choice What is the maximum number of electrons that can occupy and orbital labeled dxy and why?1, 2, 3, or 4? When helices and sheets are described as being amphipathic, it means that A. they have one side or face that is predominantly polar, with the other side being predominantly hydrophobic. B. they have large R groups on one side and small R groups on the other, because small groups are easier to pack in the interior of the protein. C. they have positive charges on one side and negative charges on the other. D. they have polar residues in the Nterminal part and charged residues in the Cterminal part. Justify why log (6) musthave a value less than 1but greater than 0 T/F prior years' financial statements are restated when the prospective approach is used. group startstrue or falsetrue, unselectedfalse, unselected .Answer these questions from the novel "Mrs.Dalloway" by Virginia WoolfRead pages 264 to 279, from "The sound of Big Ben flooded" (264) until "Did religion solve that, or love?" (279)Please answer the following questions: (200 words)Why is Clarissa upset?What happened when Richard arrived home?What does he do?What does Clarissa think about her parties?Who is Miss Kilman and what does she think of Mrs. Dalloway?What Does Mrs. Dalloway think about Miss Kilman?Why does Clarissa feel comforted when she watches the old woman in the house opposite hers looking at the window? All of the following are American Psychological Association ethical guidelines for researchers EXCEPT: *1. participants must be offered alternative activities if research participation is a course requirement2. participation must be voluntary3. participants right to privacy must be protected4. research may not involve deception5. participants must be informed of potential risks 9What are two things that happen during the tour of the school? Assume that the focus is at the pole, the major axis lies on the polar axis, and the length of the major axis is. show that the polar equation of the orbit of a planet is where is the eccentricity. In aqueous solutions at 25C, the sum of the hydroxide ion and hydronium ion concentrations (H30+) |+ [OH-]) equals 1 x 10-14 O True False a recently developed technology uses the odor of the african antelope to keep tsetse flies from feeding on domestic cattle T/F ? DIRECTIONS On your own, locate three reputable sources on the causes of the 2008 financial crisis. At least one such source should be a primary source. To ensure your sources are reputable, follow these guidelines when searching: The source clearly identifies who the author is.The source's author has expertise in the field in which the person is writing. For instance, if you are reading a source on an environmental issue, you would want the author to be someone who has research experience with the topic.The source is academic, meaning it is published by a respected site or source in the field of study, such as official government Web sites a university, academic journals, or reputable news sources.The source does not state opinions as facts.The source clearly cites where its information came from.The source is current and does not include dated information. Analyze each source, and organize your argument in chronological order. By arranging your reasoning in sequential order, you present a timeline of the various causes of the financial crisis in 2008. Finally, you will compare the information from your secondary sources with the information given in your primary sources. In the second half of your essay, evaluate the explanations for actions or events that occurred during the financial crises. Do your sources have differing points of view or different conclusions? Consider and explain which sources are more correct, based on your analysis.PROMPT Your writing should be in complete, complex sentences and no less than 500 words in length. The financial crisis is a complex topic; be sure to prove your understanding of key economic terms and policies that contributed to the crisis. You will also need to cite the three sources you use to find information on the financial crisis.!!!!!!!!!!!!!!!!!!!!!! 100 POINTS for a GREAT ANSWER. !!!!!!!!!!!!!!!!!!!!!!!!!! A girl strikes a 0.445kg soccer ball with a net force of 5.92N. What is the acceleration of the soccer ball? 0 13.3 m/s2 O 0.0752 m/s2 0 6.36 m/s2 0 5.48 m/s2 let deta = 3 for a 3x3 matrix a. compute the determinant of the matrix b = -2a^4 Abdul has applied styles to a line of text in his Word document and he would like to revert it to the Normal style. Which actions will achieve this result? selecting Normal from the Quick Styles Gallery expanding the Quick Styles Gallery and select Normal pressing CTRL SHIFT N all of the above. A photon with a wavelength of 3.401013 m strikes a deuteron, splitting it into a proton and a neutron.A) Calculate the kinetic energy released in this interaction. (MeV)B)Assuming the two particles share the energy equally, and taking their masses to be 1.00 u, calculate their speeds after the photodisintegration. (m/s) use the properties of exponents to simplify the expression. (a) e7 6/7 (b) e4 e1/2 (c) e4 5 (d) e8 e3/2