To determine how much sodium chloride will not dissolve, we need to know the solubility of NaCl at 80°C. At 80°C, the solubility of NaCl in water is 37.8 g/100 mL.
We have 100 grams of water which is equivalent to 100/1000 = 0.1 L of water.
The maximum amount of NaCl that can dissolve in 0.1 L of water at 80°C is:
37.8 g/100 mL x 0.1 L = 0.378 x 10 g = 3.78 g
Since we have 50 grams of NaCl, which is greater than the maximum amount that can dissolve, the excess amount that will not dissolve is:
50 g - 3.78 g = 46.22 g
Therefore, 46.22 grams of NaCl will not dissolve.
calculate the p h h of a solution prepared from 0.201 mol m o l of nh4cn n h 4 c n and enough water to make 1.00 l l of solution. express your answer using two decimal places.
The pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.
To calculate the pH of this solution, you first need to calculate the concentration of H+ ions in the solution. You can do this by using the following equation:
H+ (mol/L) = [NH4CN]2 x 10-10
Using the given information, the concentration of H+ ions in the solution is:
H+ (mol/L) = [0.201 mol/L]2 x 10-10 = 4.04 x 10-5 mol/L
You can then calculate the pH of the solution using the following equation:
pH = -log10(H+)
Using the concentration of H+ ions, the pH of the solution is:
pH = -log10(4.04 x 10-5) = 4.24
Therefore, the pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.
Learn more about pH: https://brainly.com/question/26424076
#SPJ11
If you have a solution of lead (II)nitrate and wish t prepare lead solid, what materials might you submerse into lead (II) nitrate solution? What is the half reaction involved?
To prepare lead solid, you would need to submerse a reducing agent such as aluminum or zinc into a solution of lead (II) nitrate. The half reaction involved is as follows:
Lead (II) Nitrate + Aluminum → Lead + Aluminum Nitrate
Explanation: 2Pb(NO3)2 + 2Al → 2Pb + 2Al(NO3)3
To prepare lead solid from a lead (II) nitrate solution, you can immerse a piece of solid zinc in the solution.What is Lead (II) nitrate?Lead (II) nitrate is a salt that is inorganic in nature. The salt is made up of one lead ion (Pb2+) and two nitrate ions (NO3-).The half reaction that is involved in this case is: Pb2+ + 2e- ⟶ PbThe above-mentioned reaction shows that the lead ions have been reduced to form lead solid.What is the process for immersing zinc into a lead (II) nitrate solution?When a piece of solid zinc is immersed in a solution of lead (II) nitrate, the following reaction takes place:Zn (s) + Pb(NO3)2 (aq) → Zn(NO3)2 (aq) + Pb (s)Solid lead gets produced as a result of the above reaction. The lead ions (Pb2+) in the lead nitrate solution get reduced to form solid lead when zinc is added to the solution.As a result, if you want to prepare lead solid from a lead (II) nitrate solution, you can immerse a piece of solid zinc in the solution. The half reaction involved is: Pb2+ + 2e- ⟶ Pb.
For more such questions on reducing agent
https://brainly.com/question/18370994
#SPJ11
The melting point of a substance is the temperature at which the particles have enough ___ energy to break free from the ___ phase and enter the ___ phase.
The melting point of a substance is the temperature at which the particles have enough kinetic energy to break free from the solid phase and enter the liquid phase.
When the melting point is reached, the solid's lattice structure is disrupted and its particles are free to move, increasing the entropy of the system.
At the molecular level, when particles in a solid gain enough energy, they vibrate more intensely and begin to break the bonds between them. This disruption leads to a decrease in entropy, as the particles move around more freely.
When the melting point is reached, this decrease in entropy is overcome by an increase in entropy due to the particles being able to move around more freely in the liquid state. The disruption of the lattice structure also results in a decrease in the intermolecular forces, and thus a decrease in surface tension.
To know more about lattice structure click on below link:
https://brainly.com/question/2497050#
#SPJ11
When comparing two sets of data, which one is more precise? a. The one with the smaller standard deviation b. The one with the mean further from the known value. c. The one with the mean closer to the known valued. The one with the larger standard deviation
When comparing two sets of data, the one with the smaller standard deviation is typically more precise.
So the correct option is A.
Standard deviation is a measure of how spread out the values in a data set are. A smaller standard deviation indicates that the values in the data set are more closely clustered around the mean. On the other hand, a larger standard deviation indicates that the values are more spread out. In this case, the one with the smaller standard deviation is more precise because the values are more closely clustered around the mean.
Additionally, the one with the mean closer to the known value is typically more precise. Since the mean is the average value of the data set, the closer it is to the known value, the more likely it is that the data set accurately reflects the known value. Therefore, the one with the mean closer to the known value is typically more precise.
In conclusion, when comparing two sets of data, the one with the smaller standard deviation and the mean closer to the known value is typically more precise. So the correct option is A.
For more questions on standard deviation
https://brainly.com/question/475676
#SPJ11
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. What is the rate law of the reaction? Rate = k Rate = k[A] Rate = k[A]2 Rate = k[A]3
A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]
The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.
As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].
Learn more about rate law at:
https://brainly.com/question/14779101
#SPJ11
4. how did your calculated final temperature compare with the actual temperature of the water-metal mixture? what do you think accounts for the difference?
To calculate the final temperature of a water-metal mixture, you need to use the principle of conservation of energy. The equation for this is:
m1c1ΔT1 + m2c2ΔT2 = 0where m1 and m2 are the masses of the metal and water, c1 and c2 are their respective specific heat capacities, and ΔT1 and ΔT2 are the changes in their temperatures. You can solve for the final temperature by rearranging this equation.
The actual temperature of the mixture may differ from the calculated final temperature due to several factors, such as the heat loss to the environment during the experiment, imperfect mixing of the water and metal, and measurement errors. These factors can introduce uncertainties in the experimental results, leading to differences between the predicted and actual temperatures.
To know more about the temperature, visit:
https://brainly.com/question/11464844
#SPJ1
The calculated final temperature was slightly lower than the actual temperature of the water-metal mixture. This difference is most likely due to the heat loss due to the environment and also the heat capacity of the mixture.
How to calculate temperature change?The calculated final temperature which was slightly lower than that of the actual temperature of the water-metal mixture. This difference in temperature is most likely due to the heat loss due to the environment and heat capacity of the metal-water mixture.
To calculate the final temperature of a water-metal mixture, a person need to use the principle of conservation of energy. The equation for this condition is:
m₁c₁ΔT₁ + m₂c₂ΔT₂ = 0
where m₁ and m₂ are the masses of the metal and water, c₁ and c₂ are their respective specific heat capacities, and ΔT₁ and ΔT₂ are the changes in their temperatures.
The actual temperature of the metal-water mixture may differ from that of the calculated final temperature due to several different factors, such as the heat loss to the environment during the experiment, imperfect mixing of the water and metal element, and the measurement errors. These factors can introduce uncertainties in the experimental results as well, which lead to the differences between the predicted and actual temperatures.
Learn more about Temperature change here:
https://brainly.com/question/28884653
#SPJ11
Which one of the following salts, when dissolved in water, produces the solution with the highest pH? Which one of the following salts, when dissolved in water, produces the solution with the highest pH? LiClO4 KF KHSO4 Li3PO4 BaO.
When LiClO4 (Lithium perchlorate) is dissolved in water, it produces a solution with the highest pH out of the five salts mentioned.
Explanation: When dissolved in water, KF (Potassium fluoride) produces the solution with the highest pH among the given salts.What are acids and bases?Acids and bases are known as Bronsted-Lowry acids and bases. A substance that can donate a proton is known as an acid, whereas a substance that can receive a proton is known as a base.Acids and bases are distinguished by their pH, with acids having a pH of less than 7 and bases having a pH of greater than 7. The pH of a substance is calculated on a logarithmic scale from 0 to 14, with 0 being the most acidic and 14 being the most basic.As a result, the greater the pH, the more basic the substance. Now we are going to discuss which one of the following salts, when dissolved in water, produces the solution with the highest pH?Among the given salts, when dissolved in water, KF produces the solution with the highest pH. It is an ionic compound with a high solubility in water. KF is produced when potassium and fluorine ions react. K+ is the ion present in this compound that gives rise to a basic solution when it dissolves in water. The K+ ion is not acidic, which implies that it cannot accept protons in solution. As a result, the solution will be more alkaline, indicating a higher pH. Hence KF produces the solution with the highest pH when dissolved in water.
For more such questions on perchlorate
https://brainly.com/question/21329214
#SPJ11
Determination of the solubility product of an ionic compound post lab answers
The solubility product constant can be calculated using the following equation:[tex]Ksp = [A+]^m[B-]^n[/tex] where A+ and B- are the cations and anions in the balanced chemical equation, and m and n are the coefficients of the respective ions.
To determine the solubility product of an ionic compound, follow the steps below:
Step 1: Determine the balanced chemical equation of the ionic compound being tested.
Step 2: Dissolve a measured amount of the ionic compound in distilled water to make a saturated solution.
Step 3: Use a pH meter to measure the pH of the saturated solution.
Step 4: Use a spectrophotometer to measure the concentration of the ions in the solution.
Step 5: Calculate the solubility product constant (Ksp) using the concentration of the ions and the balanced chemical equation.
The solubility product constant can be calculated using the following equation:[tex]Ksp = [A+]^m[B-]^n[/tex] where A+ and B- are the cations and anions in the balanced chemical equation, and m and n are the coefficients of the respective ions. The square brackets represent the concentrations of the ions.
for more such questions on ionic compound .
https://brainly.com/question/2687188
#SPJ11
what is the molarity if a naoh solution with 40 g of sodium hydroxide dissolved in water to form 500 ml of solution.
The molarity of a NaOH solution with 40 g of sodium hydroxide dissolved in water to form 500 mL of solution is 2 M.
To determine the molarity of a NaOH solution with 40 g of sodium hydroxide dissolved in water to form 500 mL of solution, we will use the formula for molarity:
Molarity = moles of solute/volume of solution in liters
To use this formula, we first need to calculate the number of moles of NaOH in the solution:
Mass of NaOH = 40 g
Molar mass of NaOH = 40.00 g/mol
Number of moles of NaOH = mass/molar mass = 40 g/40.00 g/mol = 1 mol
Now we can use the formula for molarity:
Molarity = moles of solute/volume of solution in liters
Molarity = 1 mol/0.5 L = 2 mol/L
Therefore, the molarity of the NaOH solution is 2 M.
To know more about molarity, refer here:
https://brainly.com/question/8732513#
#SPJ11
Assume that the mass of the Cu electrode changes by "x" grams in a certain period of time. Write a mathematical expression for the change in mass of the Zn electrode during the same time.
Given information:
Cu^2+ +Zn ---> Cu+Zn^2+ (net-ionic equation for the reaction in the cell)
Ecell is 1. 10 V
Please tell me if there is any other information you need to solve the problem
The change in mass of the Zn electrode is, y = (x * molar mass of Zn) / molar mass of Cu.
The reaction in the cell involves the transfer of electrons from zinc (Zn) to copper (Cu). The net ionic equation for the reaction is:
Cu²⁺ + Zn --> Cu + Zn²⁺
During the reaction, the mass of the Cu electrode decreases due to the loss of Cu^2+ ions, while the mass of the Zn electrode increases due to the gain of Zn^2+ ions. The change in mass of the Zn electrode can be related to the change in mass of the Cu electrode using the stoichiometry of the reaction.
From the net ionic equation, we can see that for every Zn atom oxidized (loses electrons), one Cu^2+ ion is reduced (gains electrons). Therefore, the moles of Cu lost must be equal to the moles of Zn gained. We can use the molar mass of Cu and Zn to relate the change in mass of the Cu electrode (x grams) to the change in mass of the Zn electrode (y grams) as follows,
moles of Cu lost = moles of Zn gained
(x grams of Cu) / (molar mass of Cu) = (y grams of Zn) / (molar mass of Zn)
Solving for y, the change in mass of the Zn electrode is:
y = (x * molar mass of Zn) / molar mass of Cu
To know more about electrode, here
brainly.com/question/17060277
#SPJ4
The volcano remains at level 4, the second-highest level on the
country’s volcano-alert system, which means a hazardous eruption
could happen in hours or days. Scientists say the threat of a major
eruption remains high because PHIVOLCS has
It appears to be related to a volcanic activity alert system in a certain country. The statement mentions that a volcano is currently at level 4, which is the second-highest level on the country's volcano-alert system.
A volcano is a graphical representation of the relationship between the energy changes and reaction progress in a chemical reaction. It is commonly used to describe acid-base reactions, where the reactants and products have different acid-base properties.
The volcano plot is a graph with the reaction rate or activity of a catalyst on the y-axis and the reaction-free energy or potential on the x-axis. It is named after its shape, which resembles a volcano with a peak representing the maximum reaction rate or activity.
The position of a reactant or catalyst on the volcano plot determines its ability to promote the reaction. If it is to the left of the peak, the reaction is thermodynamically favorable but kinetically slow. If it is to the right of the peak, the reaction is kinetically favorable but thermodynamically less favorable.
To learn more about Volcano visit here:
brainly.com/question/12945128
#SPJ4
at the concentration equilibrium constant for a certain reaction. here are some facts about the reaction: if the reaction is run at constant pressure, of heat are absorbed. some of the reactants are liquids and solids. the net change in moles of gases is .
To calculate the equilibrium constant for a reaction with heat absorbed, determine equilibrium concentrations and use the law of mass action.
At the concentration equilibrium constant for a certain reaction, heat is absorbed if the reaction is run at constant pressure. Some of the reactants are liquids and solids, and the net change in moles of gases is .
To calculate the equilibrium constant, we need to first determine the equilibrium concentrations of each species. We can do this by using the mass and moles of the reactants and products, the stoichiometric coefficients, and the net change in moles of gases.
Once we have the equilibrium concentrations, we can calculate the equilibrium constant using the law of mass action:
K = [products]/[reactants].Learn more about equilibrium: https://brainly.com/question/517289
#SPJ11
argon is to be compressed steadily from 120 kpa and 310 k to 700 kpa and 430 k. a heat loss of 20 kj/kg occurs during the compression process. neglecting kinetic energy changes, determine the power input required for a mass flow rate of 90 kg/min. >> pwrin b3
The power input required for a mass flow rate of 90 kg/min for the compression process of argon from 120 kPa and 310 K to 700 kPa and 430 K is 37.4 MW.
Given data mass flow rate, m = 90 kg/min, heat loss, Q = 20 kJ/kgInitial pressure, p₁ = 120 kPa. Final pressure, p₂ = 700 kPa, and initial temperature, T₁ = 310 K, final temperature, T₂ = 430 K.
We know that the power input is given by:
P in = m * (h₂ - h₁)
where h₁ and h₂ are the specific enthalpies at states 1 and 2 respectively. Since argon is compressed steadily, it can be assumed that the process is reversible. Thus, we can use the isentropic relation to determine the specific enthalpies:
For state 1:
s₁ = s₂ => entropy is constant h₁ = h(T₁, p₁)
For state 2:
s₂ = s₁ => entropy is constant h₂ = h(T₂, p₂)
The specific enthalpies can be determined using tables for argon. Substituting the values:
P in = m * (h₂ - h₁)
P in = 90 kg/min * ((1528.1 - 924.4) kJ/kg)
P in = 37.4 MW
Therefore, the power input required is 37.4 MW.
Learn more about power input at https://brainly.com/question/29247736
#SPJ11
Electrons that inhabit different orbitals must have a different value for the:
a. principal quantum number
b. angular momentum quantum number
c. spin quantum number
d. none of the above
Answer:
D
Explanation:
I had this question before :)
running water dissolves soluble minerals. this material is most likely to be transported by a stream as
The running water dissolves soluble minerals, and this material is most likely to be transported by a stream as a solution.
Soluble minerals are minerals that dissolve in water. Water can dissolve many substances, including gases and solids.
Most minerals are insoluble in water, which means they do not dissolve in water.
Running water dissolves soluble minerals. When these minerals dissolve, they form a solution in the water. Dissolved solids or dissolved minerals in water are called dissolved loads.
Thus, dissolved soluble minerals are most likely to be transported by a stream as a solution.
Learn more about dissolved soluble minerals here:
brainly.com/question/937307
#SPJ11
A sample has a mass of 0. 432 g and contains only O and F. The oxygen content is 0. 128 g. What percent of the mass is from fluorine?
Fluorine accounts for 70.37% of the mass.
To find the percent of the mass that is from fluorine, we need to first find the mass of fluorine in the sample.
Mass of fluorine = Total mass of the sample - Mass of oxygen in the sample
⇒ Mass of fluorine = 0.432 g - 0.128 g = 0.304 g
Now, we can calculate the percent of the mass that is from fluorine using the formula:
% mass of fluorine = (Mass of fluorine / Total mass of the sample) x 100%
⇒ % mass of fluorine = (0.304 g / 0.432 g) x 100% = 70.37%
Therefore, approximately 70.37% of the mass in the sample is from fluorine.
The problem requires us to determine the percentage of the mass that is from fluorine in a sample containing only oxygen and fluorine. To do so, we first need to calculate the mass of fluorine in the sample by subtracting the mass of oxygen from the total mass of the sample. Once we know the mass of fluorine, we can use the formula for percent composition to calculate the percentage of the mass that is from fluorine. This problem emphasizes the importance of knowing how to calculate the percent composition of elements in a given compound or mixture.
To know more about the Mass, here
https://brainly.com/question/24233677
#SPJ4
Certain molecules/atoms can diffuse directly through the phospholipid bilayer of a membrane (without the help of a transport protein). Which of the following types of molecules will diffuse most-easily directly through a membrane?
Certain molecules/atoms can diffuse directly through the phospholipid bilayer of a membrane (without the help of a transport protein). Small, non-polar molecules can diffuse most easily directly through a membrane.
What is the membrane?
Membrane can be defined as a selectively permeable layer which encloses the cell or organelles in it. Membrane acts as a physical barrier that separates a cell from its environment. It allows the entry of certain nutrients and minerals and expels waste and other unwanted products. Diffusion is the movement of substances from a region of higher concentration to a region of lower concentration in order to attain equilibrium. It is due to the random motion of particles. No energy is required for this process, and it is a passive process.
The types of molecules that will diffuse most easily directly through a membrane are small, non-polar molecules. These types of molecules have a very small molecular weight, and they are able to fit easily through the gaps between the phospholipids in the membrane. Some examples of small, non-polar molecules include oxygen, carbon dioxide, and lipids.
Learn more about diffusion on:
https://brainly.com/question/94094
#SPJ11
What’s the answer to these questions! Please help
The balanced chemical equation shows that 11 moles of oxygen are needed to produce 6 moles of water. Therefore, 16.225 moles of O₂ are needed to produce 8.85 moles of water, and 5.05 moles of O₂ are needed to fully react with 1.83 moles of Si₂H₃.
What is a balanced equation?A balanced equation is a chemical equation where the number of atoms of each element in the reactants is equal to the number of atoms of each element in the products. This means that the law of conservation of mass is satisfied.
We can use a proportion to determine the number of moles of O₂ required to produce 8.85 moles of H₂O:
11 moles O₂ / 6 moles H₂O = x moles O₂ / 8.85 moles H₂O
Solving for x, we get:
x = (11/6) * 8.85 = 16.225 moles O₂
Therefore, 16.225 moles of O₂ are needed to produce 8.85 moles of water.
Similarly, to determine how many moles of O2 are needed to react with 1.83 moles of Si₂H₃:
4 moles Si₂H₃/ 11 moles O₂ = 1.83 moles Si₂H₃ / x moles O₂
Solving for x, we get:
x = (11/4) * 1.83 = 5.05275 moles O₂
Therefore, 5.05 moles of O₂ are needed to fully react with 1.83 moles of Si₂H₃.
To find out more about balanced equations, visit:
https://brainly.com/question/12192253
#SPJ1
During the 'relative refractory period' of the action potential, the axolemma is more permeable to what?
During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.
What is axolemma?Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.
When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.
The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.
Learn more about Relative refractory period here:
https://brainly.com/question/30460363
#SPJ11
1. Analysis of a 50-g sample of a liquid compound composed of carbon, hydrogen, and nitrogen showed it to contain 9.5 g C, 3.40 g H, and 5.71 g N. What is the percent composition of Hydrogen?
The chemical contains 18.26% hydrogen in terms of percentage.
What is mass?A fundamental physical characteristic of matter is mass, which expresses how much matter is present in an item. It serves as a gauge for an object's resistance to acceleration, therefore the more massive an object, the more force is needed to move it.
How do you determine it?Calculating the total mass of the compound and the mass of the hydrogen in the compound is necessary to determine the percent composition of hydrogen in the compound.
mass of compound = sum of masses of carbon, hydrogen, and nitrogen.
mass of the mixture= 9.5 g + 3.40 g + 5.71 g
Mass of the compound= 18.61 g.
The compound's mass of hydrogen is:
mass of hydrogen=3.40 g
We can use the following formula to determine the percentage composition of hydrogen:
The percentage of hydrogen=quantity of hydrogen/ the total mass of the chemical x 100%
When we enter the values, we obtain:
hydrogen content as a percentage = (3.40 g/18.61 g) x 100% = 18.26%
Thus, 18.26% of the compound is hydrogen, according to its percent composition.
To know more about mass, visit:
https://brainly.com/question/19694949
#SPJ1
liquid methanol has a standard molar entropy of 126.8 j/k-mol at 298.15 k. use the following data to find the standard molar entropy of gaseous methanol at the same temperature. compare your answer to the experimental value of 239.8 j/k-mol.. Calculate the entropy of methanol vapor at 800 K.
The entropy of methanol vapor at 800 K is calculated to be 185.4 J/(K mol).
The standard molar entropy (S°) is the entropy of one mole of a substance in its normal state (solid, liquid, or gas) at a standard pressure of 1 bar.
Standard molar entropy of liquid methanol
S° of liquid methanol = 126.8 J/(K mol)
Standard molar entropy of gaseous methanol
The standard molar entropy of gaseous methanol (CH₃OH) can be calculated as follows:
S° of gaseous CH₃OH = S° of liquid CH₃OH + R × ln (P2/P1)
Where, P1 = 1 bar (standard pressure) P2 = vapor pressure of CH₃OH at 298.15 K = 98.8 kPa
R = gas constant = 8.314 J/(K mol)
S° of gaseous CH₃OH = 126.8 J/(K mol) + 8.314 J/(K mol) × ln (98.8 kPa/1 bar)
S° of gaseous CH₃OH = 185.4 J/(K mol)
The entropy of methanol vapor at 800K
The change in entropy of vaporization of methanol can be calculated as follows: ΔSvap = ΔHvap/T
Where, ΔHvap = enthalpy of vaporization = 35.2 kJ/mol
T = temperature = 800 K (in Kelvin)
Convert ΔHvap from kJ/mol to J/mol by multiplying by 1000.
ΔSvap = (35.2 × 1000 J/mol)/800 K
ΔSvap = 44.0 J/(K mol)
Therefore, the entropy of methanol vapor at 800 K is 44.0 J/(K mol).
The experimental value of the standard molar entropy of gaseous methanol at 298.15 K is 239.8 J/(K mol).
The calculated value of the standard molar entropy of gaseous methanol at 298.15 K is 185.4 J/(K mol).
Therefore, the calculated value is less than the experimental value.
Learn more about standard molar entropy here:
https://brainly.com/question/30649683
#SPJ11
When 2.55g of an unknown weak acid (HA) with a molar mass of 85.0 g/mol is dissolved in 250.0 g of water, the freezing point of the resulting solution is -0.258 Degrees Celsius.
Calculate Ka for the unknown weak acid.
The Ka for the unknown weak acid (HA) with a molar mass of 85.0 g/mol will be about 9.26 × 10⁻¹⁴.
What is the freeing point of unknown acid solution?The formula for calculating the freezing point depression of a solution is:
ΔTf = Kf × m × i
where, ΔTf is the change in freezing point, Kf is the freezing point depression constant, m is the molality of the solute, and i is the van't Hoff factor.
To calculate the molar mass of the unknown weak acid, we need to convert grams to moles:
2.55 g ÷ 85.0 g/mol = 0.03 molHA
We can then calculate the molality of the solution by dividing the moles of solute by the mass of the solvent in kilograms:
0.03 mol ÷ 0.250 kg = 0.12 mol/kg
ΔTf can be calculated by subtracting the freezing point of the pure solvent (water) from the freezing point of the solution:
0.258°C - 0°C = -0.258°C
The freezing point depression constant (Kf) for water is 1.86 °C/m. We can use this value, along with the molality of the solution, to solve for the dissociation constant (Kb) for the unknown weak acid:
ΔTf = Kf × m × i
0.258°C = 1.86 °C/m × 0.12 mol/kg × i
i = 1.08
Ka can be calculated using the relationship between Ka and Kb for an acid:
Kb = Kw / Ka
Kw is the ion product constant for water, which is 1.00 × 10⁻¹⁴ at 25°C. We can use this value, along with the value we just calculated for Kb, to solve for Ka:
Kb = Kw / Ka
1.08 = 1.00 × 10⁻¹⁴ / Ka
Ka = 9.26 × 10⁻¹⁴
So, the Ka for the unknown weak acid is 9.26 × 10⁻¹⁴.
Learn more about Freezing point depression here:
https://brainly.com/question/12844810
#SPJ11
Identify the compound with atoms that have an incomplete octet.A) BF3B) ICl5C) CO2D) COE) Cl2
(A) BF3 is the compound having atoms that are missing one or more of their octets.
According to the octet rule, atoms typically link together in molecular structures so that each atom has eight electrons in its outermost valence shell. There are, however, several exceptions to this rule. One such example is boron trifluoride (BF3). Boron can only form three bonds since it only possesses three valence electrons. In BF3, boron makes three covalent connections with three fluorine atoms, giving rise to six rather than the anticipated eight electrons in the outer shell of the atom. As a result, boron in BF3 has an unfinished octet. Since the atoms in such compounds are not quite content with their electron arrangement, they are more prone to engage in chemical processes in order to complete their octets.
learn more about octets here:
https://brainly.com/question/10535983
#SPJ4
Imagine that a compound of interest can be recrystallized from either methanol or water with good results. Which would you choose and why? There is not a correct answer, but there is correct thinking in describing your answer.
Both water and methanol are commonly used solvents for recrystallization. When it comes to choosing a solvent for recrystallization, it is important to consider factors such as the solubility of the solute, solvent boiling point, and purity of the solvent.
In the case of the compound of interest that can be recrystallized from either methanol or water with good results, the choice of solvent would depend on the properties of the compound. Methanol would be a good solvent if the compound of interest is highly soluble in methanol and has a low boiling point, which means it can be easily separated from the solvent by distillation.
Methanol is a better solvent for recrystallization in the following scenarios:
1. When the compound is highly soluble in methanol.
2. When the compound has a lower boiling point than methanol.
3. When it is essential to obtain a pure compound.
Water would be a good solvent if the compound of interest is less soluble in methanol and has a high boiling point, which means it can be easily separated from the solvent by filtration. Water is a better solvent for recrystallization in the following scenarios:
1. When the compound is less soluble in methanol.
2. When the compound has a higher boiling point than methanol.
To learn more about "recrystallized", visit: https://brainly.com/question/30670227
#SPJ11
A singly ionized Nickel atom has an overall charge of +1e (where e ~ 1.602 x 10-19 C) and a mass, m = 9.80 x 10-26 kg. It travels to the right with speed v. It then enters a region containing a uniform magnetic field of magnitude 0.3 T directed into the page. (a) Draw a diagram of the system including the path of the Nickel atom (be certain of the direction of deflection. (b) If the radius of the particle
The radius of the circular path of the Ni+ ion is r = 3.27 x 10⁻⁶ v meters proportional to its velocity v. The diagram has been attached below.
What is Lorentz force?Lorentz force refers to the force experienced by a charged particle in an electromagnetic field. It is named after the Dutch physicist Hendrik Lorentz who first described this force in 1892. The force arises from the interaction between the magnetic and electric fields that may be present in the vicinity of a charged particle.
The Lorentz force on a charged particle is given by the vector product of its velocity and the magnetic field, as well as by the scalar product of its charge and the electric field. The Lorentz force equation is:
F = q(E + v x B)
a) The diagram shows the direction of travel (v) and the charge (+1e) of the singly ionized Nickel atom (Ni+), as well as the uniform magnetic field (B) directed into the page. The path of the Ni+ ion is perpendicular to both v and B, and is deflected in a circular path due to the Lorentz force.
(b) The radius of the particle can be calculated using the equation for the Lorentz force:
F = qvB
where F is the force on the particle, q is the charge, v is the velocity, and B is the magnetic field. Since the force is perpendicular to both v and B, the path of the particle is circular.
The centripetal force on the particle is provided by the magnetic force, so we can equate the two:
F = ma = mv²/r
where m is the mass of the particle, a is the centripetal acceleration, and r is the radius of the circular path.
Combining these two equations, we get:
qvB = mv²/r
Solving for r, we get:
r = mv/qB
Substituting the values given, we get:
r = (9.80 x 10⁻²⁶ kg)(v)/(1e)(0.3 T)
r = 3.27 x 10⁻⁶ v meters
To know more about electric fields, visit:
https://brainly.com/question/8971780
#SPJ1
How did the russian scientist first arranged the element in the periodic table?
Dmitri Mendeleev was the Russian scientist who first arranged the elements in the periodic table. He arranged elements in the periodic table by their atomic mass, and he also made sure that elements with similar properties were placed in the same group.
The periodic table is a tabular representation of the chemical elements, which are arranged by atomic number, electron configuration, and chemical properties. The rows of the periodic table are known as periods, and the columns are known as groups or families. Elements in the same group have similar chemical and physical properties.
Mendeleev's contributions to the periodic table
Mendeleev was a Russian chemist who published the first widely recognized periodic table in 1869. In the periodic table, Mendeleev arranged the elements according to their atomic mass. He also left gaps in the periodic table for unknown elements, and he predicted their properties based on the properties of the known elements.
For example, he predicted the properties of germanium, which was discovered later, and he even named it. He was also able to predict the existence and properties of some of the noble gases.
For more question on periodic table click on
https://brainly.com/question/1173237
#SPJ11
Question.04: (3mrks) A Manometer is a device to measure the pressure of an enclosed d gas sample. A common simple manometer consists of a U shaped tube of glass filled with some liquid. Typically, the liquid is mercury because of its high density. Incandescent light bulbs "burn out" because their tungsten filament evaporates, weakening the thin wire until it breaks. Argon gas is added inside the bulbs to reduce the rate of evaporation. (Argon is chosen because, as a nobi gas, it will not react with the components of the bulb, and because it is easy to obtain in significant quantities. It is the third most abundant element in air.) What is the pressure in atmospheres of 3.4 x 10-³ moles of argon gas in a 75mL incandescent light bulb at 20 °C?
The pressure of atmospheres of the argon gas in the given incandescent light bulb is 1. 1 .
How to find the pressure of atmospheres ?The pressure of atmospheres can be found by the formula :
= ( Number of moles x Universal gas constant x Temperature in Kelvin ) / Volume of gas
Number of moles = 3.4 x 10 ⁻³
Universal gas constant = 0. 082
Temperature in Kelvin = 20 + 273. 15 = 293. 15 K
Volume of gas : 75 x 10 ⁻³
The pressure of atmospheres of the argon gas is:
= ( 3.4 x 10 ⁻³ x 0. 082 x 293. 15 ) / 75 x 10 ⁻³
= 1. 1 atm
Find out more on pressures of atmospheres at https://brainly.com/question/19587559
#SPJ1
A rigid cylinder of gas has a volume of 3.0 liters. The pressure is 3.30 atm at 20°C. At what
temperature, in K, will it reach a pressure of 7.30 atm? (Note: the volume does NOT change!)
The temperature at which the gas will reach a pressure of 7.30 atm is 1627 K.
What is the Combined gas law?We can use the combined gas law equation to solve this problem. The combined gas law states that for a fixed amount of gas, the pressure times the volume divided by the temperature is a constant:
P₁V₁/T₁ = P₂V₂/T₂
where P₁, V₁, and T₁ are the initial pressure, volume, and temperature, respectively, and P₂, V₂, and T₂ are the final pressure, volume, and temperature, respectively.
Because the volume of the gas remains constant, we can simplify the equation to:
P₁/T₁ = P₂/T₂
Rearranging for T₂, we get:
T₂ = (P₂/P₁) * T₁
Substituting the given values, we get:
T₂ = (7.30 atm / 3.30 atm) * 293 K
T₂ = 1627 K
To know more about pressure, visit:
https://brainly.com/question/12971272
#SPJ1
The temperature of the gas must be 649.47 K in order to reach a pressure of 7.30 atm at a constant volume of 3.0 L.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance or system. It determines the direction of heat flow between two objects in contact, with heat flowing from the object with a higher temperature to the one with a lower temperature until they reach thermal equilibrium. The SI unit of temperature is the kelvin (K), which is defined based on the triple point of water, where the temperature is 273.16 K. Other common temperature scales include Celsius and Fahrenheit.
We can use the combined gas law to solve this problem:
(P1/T1) = (P2/T2)
where P1, T1 are the initial pressure and temperature and P2, T2 are the final pressure and temperature.
We are given that P1 = 3.30 atm, T1 = 20°C + 273.15 = 293.15 K, P2 = 7.30 atm, and V is constant at 3.0 L.
Plugging in these values and solving for T2, we get:
(3.30/293.15) = (7.30/T2)
T2 = (7.30 * 293.15) / 3.30
T2 = 649.47 K
Learn more about Temperature from given link
https://brainly.com/question/26866637
#SPJ1
Wen hyurated ironi) sulfate is heated the following reaction takes place
FeSO, 7H,0 m Feso, + 7H,0
The colour changes from green to white
What is the meaning of the symbol en
• What two observations are made when water is added to anhydrous
Frondl sulfate:
steeribe how cobalt chloride can be used to test for the presence
of water
[1)
12]
[2]
[Total:
The symbol "en" in this context is not related to the chemical reaction given in the question. "en" is actually an abbreviation for ethylenediamine, which is a type of ligand commonly used in coordination chemistry.
When water is added to anhydrous copper(II) sulfate, two observations are made:
The blue color of anhydrous copper(II) sulfate turns into a deep blue color as the water is added. This is because the anhydrous copper(II) sulfate is undergoing an exothermic reaction with the water to form hydrated copper(II) sulfate, which is blue in color.
As more water is added, the color becomes lighter and eventually the solution becomes clear. This indicates that all of the anhydrous copper(II) sulfate has reacted with water to form hydrated copper(II) sulfate.
Cobalt chloride can be used as a test for the presence of water because it is a hydrate that changes color when it loses its water of hydration. Anhydrous cobalt chloride is blue in color, while hydrated cobalt chloride is pink. When water is added to anhydrous cobalt chloride, it reacts with the water to form hydrated cobalt chloride, which is pink in color. This color change can be used to test for the presence of water in a sample.
To know more about the Anhydrous, here
https://brainly.com/question/14745510
#SPJ4
Write short note on the mole concept.
Relate the mole concept with stoichiometric calculations.
Answer:
A mole is defined as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Explanation:
A balanced chemical reaction gives equivalences in moles that allow stoichiometry calculations to be performed. Mole quantities of one substance can be related to mass quantities using a balanced chemical equation. Mass quantities of one substance can be related to mass quantities using a balanced chemical equation.