If a clock on a ship indicates that it is 2:00 P.M. in its home port, while another clock on the ship indicates that it is 12:00 noon at the ship's present location, what is the difference in longitude between the ship's position and its home port

Answers

Answer 1

The longitudinal system establishes a distance -in degrees- from the Greenwich Meridian to any random point on the Earth's surface. Option D: The ship is 30 degrees west of its home port.

What is the longitudinal system?

The longitudinal system is a way to measure the distance in degrees between a random point on the Earth's surface and the Greenwich Meridian.

The Greenwich Meridian divides the Earth's surface into two halves.

The half on the left is the Eastern Longitude (oriental hemisphere)The half on the right is the Western Longitude (occidental hemisphere)

The Greenwich Meridian is always at 0º longitude.

Hence, longitude is always measured from the Greenwich Meridian to the west or the east.

There is a relationship we can establish between time and longitude to determine the distance in degrees or in hours between two points on the Earth's surface.

We know that the Earth completes a whole spin equal 360º in 24 hours. So, the relationship between time and degrees is as follows,

24 hours / 360º = 1hour / 15º.

If we know the difference in time between one point and the other one, we can calculate the distance in degrees between these two point.

In the exposed example,

Home port ⇒ 2:00 P.M ⇒ 14:00Ship's position ⇒ 12:00

Difference in time ⇒ 14:00 - 12:00 = 2 hours

Now, we can calculate the distance in degrees by using the previous relationship,

1 hour ------------- 15º

2 hours----------- X = 30º

Since this relationship is concernig the Greenwich Meridian, the difference in longitude between the ship's position and its home port is 30º West.

Option D is correct. The ship is 30 degrees west of its home port.

You can learn more about the longitudinal system at

https://brainly.com/question/5287013

https://brainly.com/question/13435415

#SPJ1


Related Questions

a potential energy source from oceans is ________. a) solar reflection b) lightning strikes in salt water c) ocean thermal energy d) chemiluminescent bacteria e) magnetic field generators

Answers

The potential energy source from oceans is (c) ocean thermal energy.

This refers to the energy that can be harnessed from the temperature difference between the warm surface water and the colder deep water. This temperature gradient can be used to generate electricity through a process called Ocean Thermal Energy Conversion (OTEC). OTEC plants use a heat exchanger to transfer the heat from the warm water to a working fluid, which is vaporized and used to turn a turbine and generate electricity. This process does not produce any greenhouse gas emissions and has the potential to provide a significant amount of renewable energy. While solar reflection can also be a source of energy, it is not directly related to oceans. Lightning strikes in salt water, chemiluminescent bacteria, and magnetic field generators are not currently viable sources of energy from oceans.

To know more about oceans visit:

https://brainly.com/question/12738467

#SPJ11

Because of their geographic location, cities such as New York, Istanbul and London are known as what types of cities?
a- Gateway cities, because they serve as points of entry and distribution centers for large geographic areas.
b- Ethnic cities because of their diverse ethnic groups that live there.
c- Immigrant centers, as most of the residents have clung to their culture and language.
d- Historic Cities, because their historic importance to the nation.
e- Commerce cities because of their diverse economies.

Answers

Cities such as New York, Istanbul, and London are known as gateway cities, as they serve as points of entry and distribution centers for large geographic areas.

Gateway cities are strategically located and serve as important hubs for transportation, trade, and commerce. They often have well-developed transportation infrastructure, including major airports, seaports, and rail networks, making them convenient entry points for goods, people, and services. These cities attract a diverse range of industries and businesses due to their favorable location, which facilitates international trade and economic activities.

They are characterized by their connectivity and cosmopolitan nature, attracting people from different backgrounds and cultures. Gateway cities play a vital role in regional and global economies and are centers of economic, cultural, and social exchange.

Learn more about gateway cities here:

https://brainly.com/question/30792884

#SPJ11

which states that emerged from the soviet union after its dissolution in 1991 had not been part of the soviet union?

Answers

None of the states that emerged from the Soviet Union after its dissolution in 1991 had not been part of the Soviet Union.

Soviet Union

All of the states that emerged following the dissolution of the Soviet Union in 1991 had previously been part of the Soviet Union. None of the independent states that formed were unrelated to the Soviet Union.

The list of these states includes Belarus, Estonia, Latvia, Lithuania, Ukraine, Moldova, Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan, and Uzbekistan.

These countries gained their independence as a result of the collapse of the Soviet Union and have since developed their own distinct political, economic, and cultural identities. The dissolution of the Soviet Union led to significant geopolitical changes in the region and shaped the modern landscape of these nations.

Learn more about Soviet Union: brainly.com/question/1310325

#SPJ11

If Earth had no oceans, would temperatures at the equator be hotter or colder than they are now?
A) Temperatures would be hotter.
B) This question can't be answered without additional information.
C) Temperatures would remain the same.
D) Temperatures would be colder.

Answers

If Earth had no oceans, temperatures at the equator would be hotter than they are now. This is because the presence of oceans plays a crucial role in moderating temperatures by absorbing and storing heat from the sun.

Oceans have a high heat capacity, which means they can absorb and release large amounts of heat without experiencing significant temperature changes. They also regulate the distribution of heat across the planet through ocean currents and atmospheric circulation patterns.

Without oceans, the land surface would absorb and retain heat more readily, leading to higher temperatures at the equator. Land has a lower heat capacity compared to water, so it heats up more quickly and cools down faster. As a result, the absence of oceans would result in increased heating and less effective heat distribution, causing hotter temperatures at the equator.

to know more about heat capacity, click: brainly.com/question/28302909

#SPJ11

when moist winds approach a mountain, they often drop rain as they rise over the mountain, and come down the other side of the mountain much ____.

Answers

When moist winds encounter a mountain, they tend to release precipitation as they ascend over the mountain and descend on the opposite side with reduced moisture content.

When moist winds encounter a mountain, they are forced to rise due to the topographic barrier. As the air rises, it undergoes adiabatic cooling, which leads to the condensation of water vapor and the formation of clouds. This process results in the release of rain or snow on the windward side of the mountain, where the air is forced to ascend. This site is often referred to as the "windward slope" or the "upwind side" of the mountain.

As the air reaches the peak or crest of the mountain, it starts descending on the leeward side, referred to as the "lee slope" or the "downwind side." During the descent, the air undergoes adiabatic warming, causing it to become drier. The moisture that was initially present in the air on the windward side gets depleted as it descends, resulting in a rain shadow effect. This effect creates an arid or semi-arid region on the leeward side of the mountain, where less precipitation occurs compared to the windward side.

To learn more about mountain click here:

brainly.com/question/17950058

#SPJ11

an edaphic factor that is important in differentiating habitat is ...

Answers

An important edaphic factor in differentiating habitats is soil composition.

The properties of soil, such as texture, nutrient content, and pH, play a significant role in determining the types of plants that can thrive in a particular habitat. Soil composition influences the availability of water, oxygen, and essential nutrients, which directly impact the growth and survival of organisms.

Soil composition is a critical edaphic factor that influences the characteristics and suitability of a habitat for different organisms. The composition of soil is determined by various factors, including parent material, weathering processes, and the presence of organic matter.

One aspect of soil composition that differentiates habitats is soil texture, which refers to the relative proportions of sand, silt, and clay particles. Different soil textures have varying water-holding capacities, drainage abilities, and nutrient retention capacities. This affects the availability of water and nutrients to plants and influences the types of plant species that can thrive in a particular habitat.

Soil nutrient content is another important factor. The availability of essential nutrients like nitrogen, phosphorus, and potassium in the soil significantly impacts plant growth and productivity. Different habitats may have varying levels of nutrient availability, which can lead to the dominance of specific plant species adapted to those conditions.

The pH of the soil, which indicates its acidity or alkalinity, also differentiates habitats. Some plants have specific pH requirements for optimal growth. Acidic soils, for example, may support acid-loving plants like rhododendrons, while alkaline soils may favor plants adapted to higher pH levels.

To learn more about edaphic factor  click here: brainly.com/question/27943507

#SPJ11

in terms of pedogenic regimes, the leaching process in humid and warm climates is known as _____________.

Answers

In terms of pedogenic regimes, the leaching process in humid and warm climates is known as laterization.

Laterization refers to the process of intense leaching and weathering of soils that occurs in regions with high temperatures and ample rainfall. In humid and warm climates, such as tropical and subtropical areas, the combination of heat and moisture accelerates the chemical weathering of rocks and minerals in the soil profile.

As a result, soluble minerals and nutrients are leached downward through the soil, leaving behind residual materials enriched in iron and aluminum oxides.

The laterization process typically leads to the development of distinct soil horizons, such as an iron-rich B horizon known as the "laterite layer." This layer is often characterized by its reddish or yellowish coloration due to the presence of iron and aluminum compounds.

Learn more about pedogenic here:

https://brainly.com/question/31376087

#SPJ11

the eastern margin of north america has always been a passive continental margin. True or false

Answers

The eastern margin of north america has always been a passive continental margin is false.

Passive continental margin

The statement that the eastern margin of North America has always been a passive continental margin is false. The eastern margin of North America has undergone significant geological changes over millions of years.

It was initially an active continental margin associated with tectonic activity and the formation of mountain ranges. However, over time, through various geological processes such as rifting and seafloor spreading, it transitioned into a passive continental margin.

This transition resulted in the formation of the Atlantic Ocean and the separation of North America from the Eurasian plate. So, the eastern margin of North America has experienced both active and passive stages throughout its geological history.

Learn more about passive continental margin: brainly.com/question/4430778

#SPJ11

designing and retrofitting building to withstand the effects of earthquakes is a type of

Answers

Designing and retrofitting buildings to withstand the effects of earthquakes is a type of seismic engineering. Seismic engineering involves the study and implementation of various techniques and measures to ensure that structures can withstand seismic forces and minimize damage during earthquakes.

Designing and retrofitting buildings to be resistant to the effects of earthquakes falls under the field of seismic engineering. Seismic engineering focuses on understanding the behavior of structures under seismic forces and implementing strategies to enhance their resistance.

When designing new buildings, seismic engineers consider factors such as the location, geological conditions, and expected magnitude of potential earthquakes in the region. They employ techniques such as base isolation, which involves installing flexible pads or bearings between the building and its foundation to absorb seismic energy. They also utilize structural analysis and design methods to ensure that buildings can withstand the dynamic loads imposed by earthquakes.

Retrofitting existing buildings involves modifying and strengthening their structural elements to improve their seismic performance. This can include reinforcing walls, columns, and foundations, as well as adding damping systems to absorb and dissipate seismic energy. Seismic engineers assess the vulnerabilities of existing structures and devise appropriate retrofitting measures to enhance their earthquake resistance.

To learn more about seismic click here brainly.com/question/29739121

#SPJ11

which is not an example of an open system? a earth b a very deep cave c mono lake d the pacific ocean

Answers

The Pacific Ocean also exchanges matter and energy with other oceans through ocean currents and is involved in global-scale processes such as the carbon cycle and the water cycle. These interactions with its environment make it an open system.

Which is not an example of an open system? Earth: Earth is an example of an open system. It exchanges energy with the Sun through solar radiation and receives energy from other celestial bodies. It also interacts with its surroundings through various processes such as the water cycle, nutrient cycling, and interactions with the atmosphere. Matter, such as gases, water, and minerals, constantly moves in and out of the Earth system, making it an open system.

A very deep cave: A very deep cave is not an example of an open system. Deep caves are typically isolated from the external environment, having limited exchange of matter and energy. They are often located far below the surface, shielded from direct sunlight, and have minimal interactions with the atmosphere. While there may be some limited exchange of air or water, the overall flow of matter and energy is significantly restricted compared to open systems.

Mono Lake: Mono Lake is an example of an open system. It receives water from streams and rivers flowing into it, and it loses water through evaporation. It also interacts with its surrounding ecosystem, providing habitat for various organisms. Additionally, Mono Lake exchanges gases with the atmosphere and undergoes processes such as chemical reactions and nutrient cycling. These exchanges of matter and energy with its environment make it an open system.

The Pacific Ocean: The Pacific Ocean is another example of an open system. It receives water from rivers and precipitation, exchanges heat with the atmosphere, and undergoes various oceanic processes like evaporation, condensation, and mixing.

Learn more about open system

brainly.com/question/28891854

#SPJ11

there is very little diversity among early homo fossils from 2.5 to 1.5 mya. group of answer choices true false

Answers

True. There is indeed very little diversity among early homo fossils from 2.5 to 1.5 million years ago. This period includes the emergence of the Homo genus, but the fossil record from this time period primarily consists of a few species with relatively similar anatomical features.

This lack of diversity has puzzled paleoanthropologists and has led to ongoing debates about the relationships between the different species in the early Homo lineage. The statement "There is very little diversity among early Homo fossils from 2.5 to 1.5 mya" is true. During this time period, there was actually a significant amount of diversity among early Homo fossils, as various species within the Homo genus were evolving and adapting to their environments.

Learn more about paleoanthropologists here: brainly.com/question/4997054

#SPJ11

Topography dominated by depressions formed by the collapse of caves is termed ____________.
a. valley and ridge
b. horst and graben
c. Karst

Answers

Topography dominated by depressions formed by the collapse of caves is termed Karst. Karst topography is characterized by distinctive landforms such as sinkholes, sinkhales, disappearing streams, and underground drainage systems.

Karst landscapes are primarily formed in regions where soluble rocks, such as limestone or dolomite, are present. Over time, water erodes and dissolves these rocks, creating intricate networks of underground caves and passages. As the caves develop, the roofs of some chambers may collapse, resulting in surface depressions known as sinkholes. These sinkholes can vary in size from small openings to large craters.

The collapse of caves and subsequent formation of sinkholes is a defining feature of Karst topography. It can create unique and visually striking landscapes, often characterized by a combination of surface depressions, underground drainage systems, and subterranean cave networks. Karst regions are found in various parts of the world and are known for their distinctive hydrological and ecological characteristics, as well as their geological significance.

To learn more about collapse of caves click here

brainly.com/question/906628

#SPJ11

When does climate change occur? O When incoming radiation and outgoing radiation are in balance. When incoming radiation and outgoing radiation are not in balance. O When there is consistently no incoming radiation. O When there is consistently no outgoing radiation.

Answers

Climate change occurs when there is an imbalance between incoming radiation and outgoing radiation.

This imbalance can result from various factors such as increased greenhouse gas emissions, changes in the earth's orbit, or changes in solar radiation. When there is an excess of incoming radiation, the earth's surface and atmosphere absorb more heat, leading to a rise in global temperatures.

This can cause various consequences such as melting ice caps, rising sea levels, and changes in precipitation patterns. Therefore, it is important to monitor and address the issue of climate change to ensure that incoming and outgoing radiation remain in balance and prevent further damage to our planet.

Overall, climate change is a complex phenomenon that requires continuous monitoring and action to mitigate its impacts.

To know more about climate change visit:

https://brainly.com/question/28779953

#SPJ11

whether a movement of people is an example of immigration or emigration depends on whether

Answers

Whether a movement of people is an example of immigration or emigration depends on whether they are entering or leaving a particular country.

The terms immigration and emigration are used to describe the movement of people across national borders, but their usage depends on the perspective of the country involved. Immigration refers to the act of individuals moving into a specific country from another country. It focuses on the perspective of the destination country, highlighting the influx of people into that nation. On the other hand, emigration refers to the act of individuals leaving a particular country to settle in another country. Emigration considers the perspective of the country of origin, emphasizing the departure of individuals from that nation. Therefore, whether a movement of people is classified as immigration or emigration depends on whether they are entering or leaving a specific country, respectively. The terms are relative to the context of the countries involved and their respective perspectives on the movement of individuals across their borders.

To learn more about emigration click here brainly.com/question/14531641

#SPJ11

what statement about the hazrzads of permsfrost in periglacial regions is correct

Answers

The correct option is A, Soils are carbon sinks, so thawing releases carbon into the atmosphere. promoting climate change.

The atmosphere is the layer of gases that surrounds a planet or celestial body, held in place by the force of gravity. On Earth, the atmosphere is composed mainly of nitrogen (about 78%) and oxygen (about 21%), with trace amounts of other gases such as carbon dioxide, water vapor, and argon. This gaseous envelope plays a crucial role in supporting life and shaping our planet's climate.

The atmosphere is divided into several layers based on temperature variations, with the lowest layer being the troposphere, where weather events occur. Above the troposphere are the stratosphere, mesosphere, thermosphere, and exosphere. The atmosphere serves several important functions, including regulating temperature by trapping heat from the Sun (the greenhouse effect), shielding the Earth from harmful solar radiation, and distributing heat and moisture around the globe through atmospheric circulation.

To know more about Atmosphere refer here :

brainly.com/question/32358340

#SPJ4

Complete Question:

what statement about the hazards of in periglacial regions is correct?

A). Soils are carbon sinks, so thawing releases carbon into the atmosphere. promoting climate change.

B). Structures built on cause liquefaction.

C). Glifluction is a type of slumping that results from poor soil drainage.

D). Hazards are restricted to areas of high latitudes.

The most common structures cutting across mid-oceanic ridges are:Ocean trenchesTransform faultsSeamountsAbyssal hills

Answers

The most common structures cutting across mid-oceanic ridges are transform faults and abyssal hills.

Transform faults and abyssal hills are the most common structures cutting across mid-oceanic ridges. Transform faults are areas where tectonic plates slide past each other horizontally. They are characterized by strike-slip motion and can be found perpendicular to the ridge axis.

Abyssal hills, on the other hand, are elongated features that appear as small, rolling hills on the seafloor. They are formed by volcanic activity and the accumulation of volcanic material over time. These structures are indicative of the dynamic nature of mid-oceanic ridges and play a significant role in the geologic processes shaping the oceanic crust.

Learn more about abyssal hills here:

https://brainly.com/question/31835839

#SPJ1

the phrases "the largest ocean" and "the ocean surrounding hawaii" refer to the same thing – the pacific ocean – but they have a different sense.

Answers

Yes the given statement is correct. The phrases "the largest ocean" and "the ocean surrounding Hawaii" do refer to the same body of water, which is the Pacific Ocean. However, they convey different senses or perspectives.

About the pacific -

"The largest ocean" is a general reference to the Pacific Ocean's size and magnitude compared to other oceans on Earth. It emphasizes its vastness and the fact that it is the largest ocean in terms of both area and volume.

On the other hand, "the ocean surrounding Hawaii" provides a more specific and localized sense. It highlights the geographical relationship between Hawaii and the Pacific Ocean. It implies that Hawaii is surrounded by the waters of the Pacific Ocean, emphasizing its location within that particular part of the larger ocean.

To know more about hawaii -

https://brainly.com/question/31726533

#SPJ11

How can you calculate the peak altitude of the sun in the sky?
A. By using the observer's latitude and the sun's declination.
B. By using the observer's longitude at the ecliptic.
C. By using the observer's altitude at the ecliptic.
D. By using the observer's latitude and the sun's right ascension.

Answers

The peak altitude of the sun in the sky can be calculated by using the observer's latitude and the sun's declination. This information allows for the determination of the sun's maximum elevation above the horizon at a specific location and time.

To calculate the peak altitude of the sun in the sky, two key pieces of information are required: the observer's latitude and the sun's declination.

The observer's latitude indicates the position on Earth's surface where the calculation is being performed. Latitude determines the angle between the observer's location and the Earth's equator. The sun's declination, on the other hand, represents the celestial equivalent of latitude and refers to the angle between the sun's position and the celestial equator.

By using the observer's latitude and the sun's declination, it is possible to determine the sun's maximum altitude or elevation above the horizon at a specific time. The angle between the observer's latitude and the sun's declination provides the necessary information to calculate the peak altitude of the sun in the sky.

Options B and C are incorrect because the observer's longitude at the ecliptic and altitude at the ecliptic are not directly relevant to calculating the peak altitude of the sun. Option D is also incorrect because the sun's right ascension alone is insufficient to determine the sun's peak altitude; it requires the observer's latitude as well.

To learn more about latitude click here brainly.com/question/14833692

#SPJ11

viewed from pluto, the sun would appear more than a thousand times fainter than on earth.

Answers

Viewed from Pluto, the sun would appear more than a thousand times fainter than on Earth. This is because Pluto is much farther away from the sun than Earth, so the amount of sunlight that reaches Pluto is significantly less. However, it's important to note that the actual brightness of the sun does not change - it's only the perceived brightness that is affected by the distance from the observer.

The brightness of an object is determined by the amount of energy it emits or reflects, and this energy spreads out in all directions as it travels through space. The intensity of this energy decreases as the distance from the object increases, following the inverse square law. This means that the brightness of the sun as seen from Pluto is much lower than it is from Earth because Pluto is about 40 times farther away from the sun than Earth. In fact, the sun would appear about 1/1600th as bright from Pluto as it does from Earth, or more than a thousand times fainter.

Learn more about inverse square law: https://brainly.com/question/30562749

#SPJ11

Which statements describe characteristics of MDCs? more industry higher standard of living more access to transportation and communication increased agricultural focus shorter life expectancy more access to health care reduced educational opportunities
b​

Answers

Characteristics of MDCs (More Developed Countries) include:

- More industry: MDCs typically have a higher concentration of industrial production and service-based economies.

- Higher standard of living: People in MDCs generally enjoy better living conditions, including higher income levels and access to various amenities.

- More access to transportation and communication: MDCs tend to have well-developed infrastructure, including efficient transportation systems and widespread access to communication technologies.

- Longer life expectancy: Due to better healthcare systems and living conditions, people in MDCs usually have longer life expectancies.

- More access to healthcare: MDCs have more advanced healthcare systems and services, providing greater access to medical care for their populations.

- Increased educational opportunities: MDCs typically offer a wider range of educational opportunities, leading to higher literacy rates and more skilled workforces.

For more questions on: More Developed Countries

https://brainly.com/question/6324062

#SPJ11  

Select the features that all four of the jovian planets have in common.
Jovian planets have rings
Jovian planets have strong magnetic fields
Jovian planets have large "spots" that are anticyclonic storms
Jovian planets are composed mostly of hydrogen and helium
Jovian planets have methane clouds in the upper atmosphere
Jovian planets have high orbital eccentricities

Answers

The features that all four of the Jovian planets have in common are:

- Jovian planets have rings
- Jovian planets have strong magnetic fields
- Jovian planets are composed mostly of hydrogen and helium

These characteristics are shared by Jupiter, Saturn, Uranus, and Neptune. All four jovian planets have rings, strong magnetic fields, and are composed mostly of hydrogen and helium. Jovian planets have much stronger magnetic fields than terrestrial planets like Earth, due in part to their larger size and faster rotation, which generates more internal heat and more convective motion in the planets' cores. The four jovian planets are all made up mostly of hydrogen and helium, with smaller amounts of other elements like methane, ammonia, and water ice. These planets also share some other characteristics, such as their large size and low density, their numerous moons and other satellites, and their complex weather patterns driven by internal heat and atmospheric dynamics.


Know more about Jovian planets here:

https://brainly.com/question/31657146

#SPJ11

considering the conceptual model of optimal foraging presented in this chapter, as cumulative energy investment in foraging increases at a constant rate,

Answers

As cumulative energy investment in foraging increases, the benefits eventually reach a point of diminishing returns, leading to an optimal foraging strategy where further investment does not justify the effort.

Cumulative energy investment

The conceptual model of optimal foraging suggests that as cumulative energy investment in foraging increases at a constant rate, the benefits gained from foraging activities will eventually reach a point of diminishing returns.

Initially, investing more energy in foraging leads to proportional increases in benefits as the animal accesses more food resources. However, as the animal continues to invest more energy, it may encounter depleted or harder-to-access food resources, resulting in diminishing returns in energy gains per unit of effort.

Eventually, there comes a point where further investment in foraging does not yield enough additional energy gains to justify the effort, leading to an optimal foraging strategy. The specific shape and dynamics of the optimal foraging curve can vary between species and depend on ecological factors.

Overall, animals aim to maximize energy intake while minimizing energy expenditure in the pursuit of food, adapting their foraging strategies to optimize their energy balance.

Learn more about Cumulative energy investment: brainly.com/question/31960967

#SPJ11

Of the following, which choices most likely have low NDVI values? Select all that apply.
a. tropical rainforests b. blooming alfalfa fields c. a lack of biomass d. diseased vegetation

Answers

Out of the given options, the choices that most likely have low NDVI values are c. a lack of biomass and d. diseased vegetation. NDVI (Normalized Difference Vegetation Index) is a numerical indicator used to analyze and assess vegetation cover and health.

It measures the difference between the reflectance of near-infrared light and visible red light wavelengths. Tropical rainforests, characterized by dense vegetation cover and high levels of photosynthesis, are likely to have high NDVI values. Blooming alfalfa fields, which are actively growing and photosynthesizing, are also expected to have high NDVI values. On the other hand, a lack of biomass, such as barren lands, deserts, and dry areas, will have a low NDVI value as there is minimal vegetation cover and activity.

Similarly, diseased vegetation, which is unable to carry out photosynthesis and reflects less near-infrared light, is expected to have low NDVI values. In summary, NDVI values are affected by the amount and health of vegetation, making options c. and d. the most likely choices with low NDVI values.

To know more about Vegetation Cover visit:

https://brainly.com/question/31810529

#SPJ11

use primary Data Sources such as the use of Questionnaires to ask people in Mozambique about impact of tropical cyclone freddy in Mozambique​. Use interviews, observations and field trips to collect data about the impact of tropical cyclone freddy in Mozambique.

Answers

To gather information on the impact of tropical cyclone Freddy in Mozambique, primary data sources can be used, such as questionnaires, interviews, observations, and field trips. Questionnaires can be distributed to people in Mozambique to obtain their perspective on the impact of the cyclone, including any damages or loss of property and livelihoods.

Interviews can be conducted with experts, government officials, and community leaders to gain a deeper understanding of the impact on the local economy, infrastructure, and society. Observations can be made to document physical changes to the landscape and environment caused by the cyclone.

Field trips can be taken to affected areas to collect data and assess the damage firsthand. By using these primary data sources, a comprehensive understanding of the impact of tropical cyclone Freddy in Mozambique can be obtained.

For more questions on: tropical cyclone

https://brainly.com/question/1222463

#SPJ11

why are solar-thermal facilities located primarily in the southwestern united states?'

Answers

Answer: Solar-thermal facilities, also known as concentrated solar power (CSP) plants, use mirrors or lenses to concentrate sunlight onto a small area to heat a fluid, which is then used to generate electricity. These facilities are located primarily in the southwestern United States due to several factors:

Abundant sunshine: The southwestern United States has some of the highest solar radiation levels in the country, making it an ideal location for solar-thermal facilities.

Large land availability: The southwestern United States has large areas of open land that are relatively flat, making it easier and cheaper to build large-scale solar-thermal facilities.

Dry climate: The southwestern United States has a dry climate, which is important for solar-thermal facilities because they require a lot of water for cooling purposes. The dry climate reduces the amount of water required for cooling, making it more feasible to build these facilities in these regions.

Government support: Many states in the southwestern United States have implemented policies that support the development of renewable energy, including solar-thermal facilities. This includes policies such as tax credits, renewable portfolio standards, and net metering.

Overall, the combination of abundant sunshine, large land availability, dry climate, and government support makes the southwestern United States an attractive location for the development of solar-thermal facilities.

Solar-thermal facilities are primarily located in the southwestern United States due to several factors. First, this region has a high amount of direct sunlight and clear skies, which is necessary for efficient solar power generation. Second, the terrain in the southwestern United States is ideal for solar-thermal facilities, as it is largely flat and open, allowing for easy installation and operation of large solar arrays.

Additionally, many states in the region have implemented policies and incentives to promote the development of renewable energy, making it a favorable location for solar-thermal facilities. Finally, the southwestern United States has a high demand for electricity due to its large population centers and industrial activity, making solar power an attractive alternative to traditional fossil fuel sources.

Know more about solar power:

https://brainly.com/question/31396061

#SPJ11

What are the major rivers in africa and their location

Answers

Answer:

The Nile

Explanation:

it flows through Ethopia, Sudan, Egypt , Rwanda, Tanzania, Burundi, Kenya Eritrea and the Democratic Republic of congo

which of the following conditions will tend to make rocks change by plastic (or ductile) deformation rather than by brittle deformation a) cool surroundings b) slowly applied stress c) position fairly close to Earth’s surface d) granitic composition e) All the possible answers are correct.

Answers

The following conditions will tend to make rocks change by plastic (or ductile) deformation rather than by brittle deformation is e) All the possible answers are correct.

Deformation

Cool surroundings and slowly applied stress both allow for more time and less pressure for rocks to deform plastically. Rocks that are closer to Earth's surface are also under less pressure and can deform plastically. Granitic composition also tends to be more ductile and can deform plastically.

Several conditions can favor plastic (or ductile) deformation over brittle deformation in rocks:

Temperature: Higher temperatures promote plastic deformation. Rocks at elevated temperatures are more likely to exhibit ductile behavior due to increased atomic mobility and reduced strength. In contrast, lower temperatures facilitate brittle deformation.Pressure: High confining pressure encourages ductile deformation. When rocks are subjected to high pressure from all directions, the applied stress promotes plastic behavior. In contrast, lower confining pressure can lead to brittle failure.Strain rate: Slower deformation rates often favor plastic deformation. Rocks deforming over extended periods of time tend to exhibit ductile behavior, allowing the rearrangement of atomic structures. Rapid strain rates can induce brittle behavior and fracture.Rock composition: Certain rock types, such as clay-rich or fine-grained rocks, are more prone to plastic deformation due to their mineralogy and texture. These rocks often contain minerals that can undergo plastic flow more readily than brittle fracture.Confining stress: The presence of hydrostatic or confining stress can promote plastic deformation by suppressing fracturing and allowing rocks to deform plastically.

It is important to note that these conditions are not mutually exclusive, and a combination of factors can influence whether rocks deform in a ductile or brittle manner.

Learn more about deformation : brainly.com/question/6417346

#SPJ11

If each answer could be 2-5 sentences that'd be perfect!1.How might our solar system be different if ice in the protoplanetary disk froze at 250 K instead of 150 K?2.Why were Pluto and Ceres demoted from planethood?3.Aside from its liquid water, describe two characteristics of Earth that contribute to its habitability

Answers

If ice in the protoplanetary disk froze at 250 K instead of 150 K, it would result in a different composition of the planets.

More gas giants may have formed due to the increased amount of ice available for accretion, while rocky planets like Earth may have had less water and more rocky material.

This could also impact the location and size of the frost line, the distance from the sun where volatile compounds can condense into solids.


2. Why were Pluto and Ceres demoted from planethood?Pluto and Ceres were demoted from planethood in 2006 by the International Astronomical Union because they did not meet the three criteria for planethood. These criteria state that a planet must orbit the sun, be spherical in shape, and have "cleared" its orbit of other debris.Pluto and Ceres are both part of a larger population of icy objects in the Kuiper Belt and asteroid belt respectively, and they have not fully cleared their orbits of debris.

3. Aside from its liquid water, describe two characteristics of Earth that contribute to its habitability?Two characteristics of Earth that contribute to its habitability are its atmosphere and its magnetic field. The atmosphere provides protection from harmful radiation and helps regulate the planet's temperature, while the magnetic field helps shield the atmosphere and surface from the solar wind. Additionally, Earth's position in the habitable zone of the sun, where temperatures are just right for liquid water to exist, is another important factor in its habitability.

To know more on Pluto visit:

https://brainly.com/question/13402868

#SPJ11

A tornado _____ is issued when the atmosphere is set up favorably for tornadoes to form. Word Bank: Mesocyclone, Cold, Watch, Upslope July, Frontal, Windy, Advisory, September, Cyclogenesis, Landspout, August, Warning, Tornado, Warm, Stormogenesis

Answers

A tornado watch is issued when the atmosphere is set up favorably for tornadoes to form.

A tornado watch is a warning issued by the National Weather Service (NWS) to alert people of the possibility of severe weather conditions, including thunderstorms and tornadoes. It is issued when the conditions are conducive for the formation of a tornado, but there is no tornado on the ground yet.

The watch area is usually large, covering multiple counties or even several states. People in the watch area should be alert and prepared to take action if a tornado warning is issued. During a tornado watch, people should be aware of the weather conditions and stay informed by listening to weather radio or local news.

They should also prepare an emergency kit that includes important documents, food, water, and first aid supplies. It is important to stay away from windows and seek shelter in a basement or interior room on the lowest level of a building. Being prepared can help people stay safe during severe weather conditions.

To know more about atmosphere refer here

https://brainly.com/question/26767532#

#SPJ11

seismic waves are characterized by how much the ground moves, which is indicated by the ______, and the time it takes for a complete wave to pass, which is the ______..

Answers

Seismic waves are characterized by two main factors: amplitude and period.

Amplitude: The amplitude of a seismic wave refers to the maximum amount of ground displacement caused by the wave. It indicates the magnitude of the energy carried by the wave. Amplitude is commonly measured as the peak height of the wave on a seismogram. Larger amplitudes generally indicate stronger seismic events.

Period: The period of a seismic wave is the time it takes for one complete wave to pass a given point. It represents the duration between successive wave crests or troughs. Period is typically measured in seconds. Longer periods indicate slower wave motion, while shorter periods indicate faster wave motion. Different types of seismic waves, such as P-waves (primary waves), S-waves (secondary waves), and surface waves, have distinct periods.

learn more about seismic waves here:

https://brainly.com/question/13056218

#SPJ11

Other Questions
What concentration of HF (Ka = 7.2 104) has the same pH as that of 0.070 M HCl?Question 10 options:A)6.8 MB)5.0 106 MC)1.0 102 MD)0.070 ME)0.15 M Suppose a, b e R and f: R R is differentiable, f'(x) = a for all x, and f(0) = b. Find f and prove that it is the unique differentiable function with this property. Give a proof of the statement above by re-ordering the following 7 sentences. Choose from these sentences. Your Proof: Clearly, f(x) = ax + b is a function that meets the requirements. So, C = h(0) = g(0) - f(0) = b - b = 0. Therefore, it follows from the MVT that h(x) is a constant C. Thus, g-f= h vanishes everywhere and so f = g. Suppose g(x) is a differentiable functions with 8(x) = a for all x and g(0) = b. We need to show that f = g. The function h := g - f is also differentiable and h'(x) = g(x) - f'(x) = a - a=0 for all x. It remains to show that such f is unique. What are the three plate boundaries and how do they interact? The cargo hold of a truck is a rectangular prism measuring 18 feet by 13. 5 feet by 9 feet. The driver needs to figure out how many storage boxes he can load. True or false for each statement a client who has aids has lost weight and is easily fatigued because of their malnourished state. which medication may be prescribed to stimulate their appetite? Use Green's theorem to evaluate the line integral CFds where F= and C is the boundary of the region bounded by y=x2, the line x=2, and the x-axis oriented counterclockwise. 100 Points! Geometry question. Photo attached. Please show as much work as possible. Thank you! use the divergence theorem to compute the flux rr s f nds, where f(x,y,z) = (zx, yx3 , x2 z) and s is the surface which bounds the solid region with boundary given by y = 4 x 2 z 2 and y = 0. Which of the following is a sentence fragment? A. The homeowner can buy practically anything for home improvement through the dealer. B. When a homeowner wants nails or doorknobs or wood. C. The building-supply dealer carries everything for the home workshop. D. The dealer can even phone a supplier for cement. Use cylindrical coordinates to evaluate the triple integral Ex2+y2dV Which of the following is not a good reason for including visual aids in your presentation?a. Visual materials are less work to makeb. Visual materials help understandingc. Visual materials help credibilityd. Visual materials help maintain the audience's attention According to the john lewis speach, what was the problem with the legislation? a cell has a plasma membrane with multiple folds. why does it have that shape? The graph below displays a fire department'sresponse time, which measures the time from whenthe alarm is sounded at the firehouse to the time thefirst fire engine leaves the station.Fire Department Response Times0.4Relative Frequency100201020 30 40 50 60 70 80 90Response Time (Seconds)Which of the following correctly describes the shape ofthe distribution?uniformskewed leftskewed rightroughly symmetric The second segment of a composite tolerance specification is not required to include datum feature references. F. True or False? . Let g(x) be a differentiable function for which g'(x) > 0 and g"(x) < 0 for all values of x. It is known that g(3) = 2 and g(4) = 7. Which of the following is a possible value for g(5)? (A) 10 (B) 12 (C) 14 (D) 16Previous questionN What landforms result from converging continental - continental crust? which is the correct order of the events leading to cultural eutrophication? Which rewrite of sentence 15 contributes to clarity with an appositive? (15) "Greensward" called for the construction of four bodies of water and thirty-six archways and bridges ("History of Central Park"). a "Greensward" called for the construction of four bodies of water and thirty-six archways and bridges, which required a large investment ("History of Central Park"). b "Greensward" called for the construction of four bodies of water (both streams and ponds) and thirty-six archways and bridges ("History of Central Park"). c "Greensward" called for the construction of four bodies of water (there are now many more) and thirty-six archways and bridges ("History of Central Park"). d "Greensward" called for the construction of four bodies of water and thirty-six archways and bridges for crossing these waters ("History of Central Park" Which of the following functions can be used to convert a character string to lower-case letters? a. LOW b. LOWER. c. SMALLER d. SMALLCAP. b. LOWER.