If a jug hold 5 gallon of water. If a gla hold 4 oz of water, how many glae can be drawn from the water jug

Answers

Answer 1

The water in the 5-gallon jug will fill 160 glasses.

According to the issue, a glass carries 4 ounces of water while a jug holds 5 gallons. We must convert the jug's volume from gallons to ounces and divide it by the volume of glass in order to determine how many glasses can be filled from it.

The water in the jug needs to be converted from gallons to ounces first. A gallon contains 128 ounces, hence 5 gallons of water equal 5×128 = 640 ounces.

The amount of water in the glass is then divided by the amount of water in the jug. If a glass holds four ounces, then 160 glasses can be filled from the jug, or 640 divided by four.

It's vital to note that we are converting between units in this problem using the rule that 1 gallon = 128 ounces. This conversion factor is based on the units of a gallon and an ounce, which are both common measurements.

We can simply convert gallons to ounces using this conversion factor, which enables us to perform the calculations required to get the solution.

In conclusion, by dividing the volume of the 5-gallon jug of water by the volume of glass, 160 glasses can be filled from it. To accomplish this, we must use a conversion factor to convert water measured in gallons to ounces.

Learn more about gallon at

https://brainly.com/question/19638640

#SPJ4


Related Questions

which of these attacking reagent is an electrophile 1:HNO3 2:Nh3 3:Br- 4: H+​

Answers

The attacking reagent which is an electrophile is H+​; option D.

What are electrophiles?

Electrophiles are electron-loving reagents which attack and attach to electron-rich reagents.

Electrophiles usually are positively charged reagents.

Therefore, the attacking reagent which is an electrophile is H+​.

In conclusion, electrophiles are electron-loving reagents.

Learn more about electrophiles at: https://brainly.com/question/5139016

#SPJ1

What happens to iron in a bolt as the bolt rusts?

Answers

Answer:

write the following as fractions in their simplest form

how do protons determine the identity of an atom​

Answers

Explanation:

Proton is one of the subatomic particles which has a positive charge. The number of protons present will give the atomic number of the chemical element. Every element will have a unique atomic number. Thus, we can say that protons will determine the identity of an element.

About how long does it take for the reaction to reach equilibrium in this concentration versus time graph?

a graph of reactant and product concentration vs. time; a red curve shows the reactant concentration decreasing while two blue curves show the product concentration increasing with time; both blue curves intersect the red curve; the chemical equation is water reacting to produce hydrogen and oxygen

A.
0.5 second
B.
1.5 seconds
C.
2.5 seconds
D.
4.5 seconds

Answers

The time taken for the reaction to reach equilibrium in this concentration versus time graph is 4.5 seconds and is denoted as option D.

What is Time?

This refers to the duration in which a certain action or activity takes place with its unit being seconds.

From the graph we can deduce that:

The two blue lines, the concentrations of H₂ and O₂, become flat between 4 and 5 seconds.The red line, the concentration of H₂O, becomes flat, also, between 4 and 5 seconds.

This therefore means that the time taken for the reaction to reach equilibrium in this concentration versus time graph is 4.5 seconds.

Read more about Concentration versus time graph here https://brainly.com/question/14903305

#SPJ1

Answer: 4.5 is right just took the test.

Explanation:

Which answer best describes what is happening in the following reaction?

2C8H18 + 25O2 Right arrow. 16CO2 + 18H2O
This is not a redox reaction. It is an example of combustion.
This is a redox reaction in which octane (C8H18) is the reducing agent.
This is a redox reaction in which carbon dioxide (CO2) burns due to ignition.
This is not a redox reaction, because a solution of carbon dioxide and water results.

Answers

The statement that best describes what is happening in the following reaction is this is not a redox reaction, It is an example of combustion (option A).

What is a combustion reaction?

A combustion reaction is a reaction wherein a substance is combined with oxygen, usually at high temperature, releasing heat.

According to this question, octane undergoes a combustion reaction to produce carbon dioxide and water as follows: 2C8H18 + 25O2 = 16CO2 + 18H2O

Therefore, the statement that best describes what is happening in the following reaction is this is not a redox reaction, It is an example of combustion.

Learn more about combustion at: https://brainly.com/question/12172040

#SPJ1

Answer:

A: This is not a redox reaction. It is an example of combustion.

Explanation:

Predict the mass (in grams) of precipitate that will form if a solution containing 2. 34 g of cesium hydroxide is added to a solution containing a large excess of tiso4?

Answers

The mass (in grams) of precipitate is 0.6386 gram.

Calculation,

To find the mass of precipitate, first we have to find the precipitate. So, the chemical  reaction when cesium hydroxide react to large excess of [tex]TiSO_{4}[/tex].

Mole of cesium hydroxide = given mass/molar mass = 2.34 gm/ 149.912 g/mol= 0.0156 moles

[tex]2CsOH+TiSO_{4}[/tex]→[tex]Ti(OH)_{2} +Cs_{2} SO_{4}[/tex]

So, mole ratio 2: 1

It means two moles of cesium hydroxide required to form one mole of titanium hydroxide.

To produce 0.0156 moles of cesium hydroxide = 0.0156 moles×1 mole/2

Mole of titanium hydroxide = 0.0078 mole

Mole of titanium hydroxide = given mass/molar mass of titanium hydroxide

Mole of titanium hydroxide = given mass/81.82 g/mol = 0.0078 mole

Mass of titanium hydroxide = 0.0078 mole ×81.88 g/mol  = 0.6387 gm

learn about Precipitation

https://brainly.com/question/20925010?

#SPJ4

Ionic compounds are ______ at room temperature and generally have ______ melting and boiling points.

Answers

Thus all ionic compounds are solids at room temperature and generally they have very high melting and boiling points.

There are strong electrostatic attractive forces between the positive and negative ions in ionic solids. These extremely powerful forces must be overcome in order to melt the solid. As a result, all ionic compounds are solids at room temperature and have extremely high melting and boiling points.

E.g. MgF2 has a melting point of. 1261°C and a boiling point of 2239°C

The strong forces between the ions are difficult to break, which also explains why ionic compound crystals are hard. Ionic substances form massive ionic lattices with oppositely charged ions.

What are the characteristics of ionic compounds?

Ionic compounds are made up of charged particles known as ions. It has a massive lattice structure with strong electrostatic attraction forces. Giant ionic lattices are regular structures found in ionic compounds.

In Chemistry, some examples of ionic compounds are:

Sodium chloride.Sodium oxide.Lithium chloride.Aluminum chloride.Potassium bromide.

Learn more about ionic compounds:

https://brainly.com/question/9167977

#SPJ4

Please help me!!!!!!!!!!!!!

Answers

1)The limiting reactant will be aluminum acetate

2) The mass of aluminum hydroxide formed will be 9.75 grams.

Stoichiometric problem

The equation of the reaction is as below:

[tex]Al(C_2H_3O_2)_3 + 3NaOH --- > 3C_2H_3NaO_2 + Al(OH)_3[/tex]

The mole ratio of the 2 reactants is 1:3.

Mole of 100 mL. 1.25 mol/L [tex]Al(C_2H_3O_2)_3[/tex] = 0.1 x 1.25 = 0.125 mol

Mole of 300 mL, 2.30 mol/L NaOH = 0.3 x 2.3 = 0.69 mol

Thus, aluminum acetate is limited.

Mole ratio of  [tex]Al(C_2H_3O_2)_3[/tex] and [tex]Al(OH)_3[/tex] = 1:1

Equivalent mole of [tex]Al(OH)_3[/tex] = 0.125 mol

Mass of 0.125 mole [tex]Al(OH)_3[/tex] = 0.125 x 78 = 9.75 grams.

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

Blood alcohol concentration (bac) is defined as the ration of alcohol in the system to?

Answers

Blood Alcohol Concentration (BAC) is defined as the ratio of alcohol in the system to Blood in the system.

Blood/Breath Alcohol concentration (BAC) is the quantity of alcohol within the bloodstream or on one's breath. BAC is expressed because of the weight of ethanol, in grams, in 100 milliliters of blood, or 210 liters of breath. BAC can be measured with the aid of breath, blood, or urine exams.

Blood alcohol content material shows the percentage of alcohol that is in a person's bloodstream. BAC is crucial to prosecutors because they accept it as true with it displays how tons an individual is impaired via alcohol.

Human beings making their own alcoholic beverages regularly calculate the percentage of alcohol by way of extent by way of measuring their relative density with a hydrometer or their sugar content material with a refractometer.

Learn more about alcohol here: https://brainly.com/question/24129981

#SPJ4

In Keq expressions, "[]" represents of reactants and products.
a)concentration
b)temperature
c)moles
d)mass

Answers

Answer: concentration

Explanation:

This is a fact.

Chemical A has a toxicity level of 1 and chemical B has a toxicity level of 2. If a mixture of the two chemicals has a toxicity level of 3, what can we say about the results of the mixture

Answers

If chemical A has a toxicity level of one and chemical B has a toxicity level of two and the mixture of these two chemicals has a toxicity level of three, it means that the mixture of these two chemicals form a synergistic mixture.  This is condition is known as synergism.

A synergistic effect is exerted when a greater effect is exerted than the added effect of both the chemicals together. This is applicable for toxic chemicals as well as non-toxic chemicals. Synergism can be dangerous in the case of both toxicology or chemicals in general. The greater effect of toxic chemicals can result in a dangerous mixture, which could prove to have fatal effects in many cases.  The opposite of synergistic effect is antagonistic effect. The antagonistic effect is the effect where the overall effect of these two chemicals would be less than the sum of the effects imparted by the individual chemicals.

Learn more about synergism here-

https://brainly.com/question/14317079

#SPJ4

a group of atoms of more than one elements forms

Answers

Considering the definition of chemical compounds, a group of atoms of more than one elements forms chemical compounds.

What is a chemical compound

Chemical Compounds are substances that are made up of a minimum of 2 elements that have reacted with each other to give another substance different from the initial elements. Elements are held together by what is known as a chemical bond.

In other words, a chemical compound is any substance formed by the union of two or more types of chemical elements, that is, by atoms of two or more different types of chemical elements, joined together by chemical bonds in certain proportions.

A chemical compound can be separated into its constituent elements by chemical reactions.

Summary

In summary, a group of atoms of more than one elements forms chemical compounds.

Learn more about a chemical compound:

https://brainly.com/question/26487468

https://brainly.com/question/26752851

#SPJ1

A volume measured by a graduated cylinder that was marked in 100 mL
increments would be reported to the nearest __________mL

Answers

The volume measured using such a cylinder will be reported to the nearest 10th mL.

Cylinder graduation

10 mL graduated cylinders are always read to the nearest two decimal places.

100 mL graduated cylinders are always read to the nearest 1 decimal place. The nearest 1 decimal place is the same thing as the nearest 10th.

Thus, a reading made using a 100mL increment graduated cylinder would be reported to the nearest 10th mL.

More on cylinder graduation can be found here: https://brainly.com/question/14427988

#SPJ1

C6 h12o6 6o2 adp pi 6co2 6 h2o molecule a heat the molecule referred to as ""molecule a"" in the equation above is:_________
a. atp.
b. nadph.
c. nadh.
d. adp.

Answers

The "molecule a" referred to ATP in the equation.

So, option A is correct one.

The equation is given as,

[tex]C_{6} H_{12} O_{6}+ 6O_{2}[/tex] → [tex]6CO_{2}+ 6H_{2}O + ATP[/tex]

The above equation indicates the respiration activities in the plants.

The aerobic respiration takes place in the Mitochondria and which requires oxygen and glucose and produces carbon dioxide , water and energy.

The energy is in the form of  ATP. The pull form of ATP is adenosine triphosphate. The ATP is also called energy carrier because it found in the cells of the all living organism and this molecule carries energy.

To learn more about aerobic respiration

https://brainly.com/question/12605249

#SPJ4

state and appearance sodium chloride

Answers

Sodium chloride is white, crystalline solid at room temperature.

Sodium chloride

It is a compound whose components atoms are sodium and chlorine.

The atoms of the two elements combine chemically through an ionic bond. The sodium donates it valence electron to the chlorine atom.

Thus, sodium chloride is an ionic compound. It has a characteristic white appearance and crystalline structure.

The compound is a solid at room temperature. It has a melting point of 801 °C.

More on sodium chloride can be found here: https://brainly.com/question/9811771

#SPJ1

When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced. What is the percent yield of carbon monoxide for this reaction? SiO₂(s) + 3C(s) SiC(s) + 2CO(g)​

Answers

Answer: 60.5%

Explanation:

When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced.  60.5% is the percent yield of carbon monoxide for this reaction.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield times by 100% divided by the experimental yield. The percent yield equals 100% if the theoretical and actual yields are equal.

SiO₂(s) + 3C(s)→ SiC(s) + 2CO(g)​

moles of carbon =30.0 / 12=2.5moles

3 moles of carbon give 1 moles of SiC

1 mole of carbon will give 1/3 moles of SiC

2.5 mole of carbon will give (1/3)×2.5 =0.83 moles of SiC

mass of  SiC = 0.83× 40.09=33.27

percent yield = (actual yield/theoretical yield) x 100%

percent yield= (28.2 / 33.27)x 100%

percent yield = 60.5%

To know more about percent yield, here:

https://brainly.com/question/17042787

#SPJ2

Will give u brainliest!!!
part e
drop a single crystal of sodium acetate into the flask. observe the contents of the flask. what happens to the sodium acetate solution in the flask after you drop in the crystal?

Answers

Answer:

I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

Explanation:

I used this and scored 100% but if you copy and paste they will flag you for plagiarsm so make sure to rewrite it in your own words.

I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

What is Sodium acetate solution?

Chemically known as CH3COONa, sodium acetate is a hygroscopic powder that is very water soluble. The addition of sodium acetate to products like heating pads, food, industries, and concrete is possible.

When administered intravenously, sodium acetate plays a critical role in medicine as an electrolyte replenisher. It is mostly recommended to treat hyponatremic patients' sodium levels. Additionally, it can be used to alkalinize urine and treat metabolic acidosis.

In patients with limited or no oral intake, salt should be added to high volumes of intravenous fluids to prevent or treat hyponatremia. for the patient's needs cannot be addressed by conventional electrolyte or nutrient solutions, it is also helpful as an addition for creating customized intravenous fluid formulas.

Therefore, I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

To learn more about Sodium acetate, refer to the link:

https://brainly.com/question/12924347

#SPJ2

A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. What is the value of ka2

Answers

A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. The value of ka2 is 27.89.

What is pH ?

pH is used to measure whether the substance is acidic, basic or neutral and the range is 0-14. If the pH is less than 7 then the solution is acidic in nature. if the pH is more than 7 then the solution is basic in solution. If the pH is equal to 7 then the solution is neutral in nature.

How to find the polyprotic value ?

To find the polyprotic value

[tex]K_{a_2}[/tex] = pH of first half equivalence point × pH of second half equivalence point

[tex]K_{a_2}[/tex] = 3.27 × 8.53

      = 27.89

Thus from the above conclusion we can say that A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. The value of ka2 is 27.89.

Learn more about the pH here:

https://brainly.com/question/22390063

#SPJ4

Which of the following measurements
have four significant figures? Select all
that apply.

Answers

Answer:

1.001

120.0

Explanation:

Significant figures are used in science to determine the precision of a number. Depending on the decimal point, sig figs are counted in different ways.

Decimal Points

When counting sig figs, you always start at the first non-zero number. However, sometimes you start from the left, other times the right.

If the decimal point is present, start counting sig figs from the left.If the decimal point is absent, start counting sig figs from the right.

Remember to start counting at the first non-zero number.

For people in the Americas, there is a trick to remembering this.

If this decimal is Present, start from the Pacific. If it is Absent, start from the Atlantic.

This works because the Pacific ocean is to the left of the Americas, and the Atlantic is to the right.

4 Significant Figures

The number 1.001, has 4 significant figures. Since there is a decimal point, we start counting from the left. The first digit is not zero, so we count all four places as significant.

The number 120.0 also has 4 sig figs. Like the number above, we start counting from the left because of the decimal. The first digit on the left is not zero, so we once again count all 4 digits as significant.

Life alters the atmosphere by producing and removing _____________________, carbon dioxide, and methane.

Answers

Life alters the atmosphere by producing and removing oxygen, carbon dioxide, and methane.

Burning fossil fuels like coal, and natural gas, including oil, solid waste, trees, and other biological materials release carbon dioxide into the atmosphere, along with some chemical reactions.

It is thought that the first billion years of Earth's history saw a lot of volcanic activity. With little to no oxygen, the early atmosphere was presumably primarily composed of carbon dioxide.

Therefore, life alters the atmosphere by producing and removing oxygen, carbon dioxide, and methane.

To know more about atmosphere

https://brainly.com/question/26767532?

#SPJ4

What mass of oxygen gas (o2) should occupy a 25. 0 l container when the pressure is 665 torr and the temperature is 55. 0ºc?

Answers

The mass of oxygen gas is 26.0 g.

Given,

Volume (V) = 25.0 L

665

Pressure (P) = 665 torr =

760 atm = 0.875 atm

Temperature (T) = 55 C = (55+2730) K = 328 K

Now using the Ideal gas law, calculate the mole of oxygen gas (02)

PV = nRT

atm . L

0.875 atm x 25.0 L = n x 0.082-

X 328K

mole . K

n = 0.813 mole

Using the molar mass of Oz = 32.0 g/mole, Calculate the mass of Oz

mass = 0.813 mole x 32.0 mole

mass = 26.016 g

mass = 26.0 g

The answer is 26.0 g.

Learn more about Ideal gas law here: https://brainly.com/question/20212888

#SPJ4

(REALLLY NEED HELP) What takes extra electrical current from a wire or appliance and prevents it from going somewhere dangerous?


a ground

a resistor

a loopback

a current

Answers

Answer:

A resistor resists extra electric current.

A certain mass of nitrogen gas occupies a volume of 8.56 L at a pressure of 3.72 atm. At what pressure will the volume of this sample be 10.94 L

Answers

The final pressure of the nitrogen gas with the increase in volume is 2.91 atm.

What is Boyle's Law?

Boyle’s law is a gas law that states that the pressure exerted by a gas (of a given mass, kept at a constant temperature) is inversely proportional to the volume occupied by it.

The relation can be given as:

[tex]P_1V_1=P_2V_2[/tex]

The initial pressure of the gas, [tex]P_1[/tex] = 3.72 atm

The initial volume of the gas, [tex]V_1[/tex] = 8.56L

The final volume of the gas, [tex]V_2[/tex] = 10.94 L

Substituting the values, the final pressure [tex]P_2[/tex] is given as:

3.72 × 8.56 = [tex]P_2[/tex] × 10.94

[tex]P_2 =\frac{3.72 * 8.56}{10.94} \\\\P_2 =2.91 atm[/tex]

Therefore, the final pressure of the nitrogen gas with the increase in volume is 2.91 atm.

Learn more about pressure here:

https://brainly.com/question/25736513

#SPJ4

11.A student titrated a diprotic weak acid (H2A) with 0.100 M NaOH. The titration required 22.58 mL of NaOH solution to reach the equivalence point. How many moles of diprotic acid were present

Answers

Moles of diprotic acid present were:

A mole of diprotic acid contains 0.0023 moles [tex]H_{2}A[/tex].

Law of dilution:

Titrations are conducted using the law of dilution.

The number of moles of solute divided by the arrangement's volume in liters is known as molarity.

The number of moles per liter of solution is referred to as molarity. Additionally, we write it as M. Furthermore, we employ the following equation to determine molarity:

Molarity = moles of solute/liter of solution.

Calculation:

Moles of acid = moles of base

n = M/V

Moles of [tex]H_{2}A[/tex] = Moles of NaOH used

Therefore,  0.100 x 0.02258L = 0.0023 mol [tex]H_{2}A[/tex]

Learn more about molarity here,

https://brainly.com/question/15522110

#SPJ4

Two trains, A and B are moving at a speed of 20 km per hour
and 30 km per hour respectively. Which type of energy do
these two trains have?

Answers

Answer:

[tex]\fbox {kinetic motion}[/tex]

Explanation:

As the trains are clearly in motion, we can understand the these trains possess kinetic energy, which is by virtue of a motion of a body.

Answer:

type of energy that two train have are kinetic energy

The solubility of pbso₄ in water at 25 °c is 7. 9 × 10⁻⁴ m. What is ksp for pbso₄?.

Answers

ksp = 2S²

= 2 [ 7.9* 10-⁴ moldm-³ ]²

= 124.82 * 10-⁸ mol² dm-⁶

The term Ksp denotes the solubility product. It is generally used to predict the precipitation of reactions. The  Ksp of PbSO₄ is  6.24 × 10⁻⁷.

What is solubility product?

The solubility product of a sparingly soluble salt is defined as the product of the molar concentrations of its ions in a saturated solution of it at a given temperature. By knowing the solubility product of a substance, it is possible to predict whether a substance precipitate out or not.

In short, the precipitation of an ionic substance from the solution occurs when the ionic product exceeds the value of its solubility product at that temperature.

Here PbSO₄ dissociates as:

PbSO₄ → Pb²⁺ (aq) + SO₄²⁻ (aq)

Ksp = [Pb²⁺] [SO₄²⁻ ]

= [7. 9 × 10⁻⁴] [7. 9 × 10⁻⁴]

= 6.24 × 10⁻⁷

Thus the value of Ksp is  6.24 × 10⁻⁷.

To know more about solubility product, visit;

https://brainly.com/question/4577985

#SPJ2

The combination of sucrose, sucrase, and water produces sucrase, glucose, and fructose. Which component of the reaction is the substrate

Answers

Answer:

Sucrose to is the substrate of the reaction because is a simple sugar( disaccharide) which produce glucose and fructose in the presence of sucrase or when it is hydrolysed.

121) The sugar sucrose has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen
atoms. How would this be written?
A) Co12H22O1
B) CI2H22011
C) C6H1206
D) CacH1206

122) How are the elements organized on the periodic table?
A) Atomic Mass
B) Element Name
C) Symbol
D) No Set Organization

123) Which of the following elements would be considered a compound?
A) CH
B) Si
C)F
D) O6

124) The formula for water is H2O meaning there are 2 Hydrogen atoms and 1
Oxygen. What is the atomic mass of one molecule to the nearest hundredth?
A) 15.99
B) 16.99
C) 17.99
D) 18.99

Answers

Answer:

Explanation:

121) The sugar sucrose has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen

atoms. How would this be written?

A) Co12H22O1  [Co is cobalt]

B) CI2H22011     [Yes]

C) C6H1206       [6 C atoms]

D) CacH1206     [Ca is calcium]

122) How are the elements organized on the periodic table?

A) Atomic Mass  [Yes, from lightest to heaviest]

B) Element Name

C) Symbol

D) No Set Organization

123) Which of the following elements would be considered a compound?

A) CH     [Yes, two or more elements combined]

B) Si       [No]

C)F         [No]

D) O6     [No, multiple atoms, but same element]

124) The formula for water is H2O meaning there are 2 Hydrogen atoms and 1

Oxygen. What is the atomic mass of one molecule to the nearest hundredth?

A) 15.99  

B) 16.99

C) 17.99     [Yes, 16 + 2*1 = 18]

D) 18.99

Assume that helium behaves as an ideal gas. what is the estimated density of 1.0 g of helium gas at a temperature of 27 °c and a pressure of 3.0 atm? (note: use r = 0.0821 l∙atm∙mol−1∙k−1)

Answers

The density of the helium gas is 0.487 g/L

Calculation,

According to Ideal gas equation,

PV = nRT             ...(I)

The values of some terms are given as,

P is the pressure = 3 atm

V is the volume = ?

T is the temperature = 27°C = 27°C + 273 = 300 K

R is the universal gas constant = 0.0821 L∙atm∙mol−1∙K−1

n is the number of moles of helium = given mass of helium/molar mass of helium

n is the number of moles of helium = 1 g/ 4 g/mole = 0.25 mole

So, by putting the value of all data given in the equation (i) we get,

3 atm × V = 0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K

V =  0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K/3 atm

V = 2.05 L

The formula of density = given mass /volume = 1g/2.05 L = 0.487 g/L

learn about density

https://brainly.com/question/15164682

#SPJ4

At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. What partial pressure (in atm) of He would give a solubility of 0.200 M

Answers

At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. 4.25 atm is the  partial pressure of He would give a solubility of 0.200 M.

What is Henry's Law ?

Henry's Law is a gas law states that at a constant temperature the amount of gas that dissolved in a liquid is directly proportional to the partial pressure of that gas.

What is relationship between Henry's Law constant and Solubility ?

The solubility of gas is directly proportional to partial pressure.

It is expressed as:

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

where,

[tex]S_{\text{gas}}[/tex] = Solubility of gas

[tex]K_{H}[/tex] = Henry's Law constant

[tex]P_{\text{gas}}[/tex] = Partial pressure of gas

Now put the values in above expression we get

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

0.080M = [tex]K_{H}[/tex] × 1.7 atm

[tex]K_{H} = \frac{0.080\ M}{1.7\ \text{atm}}[/tex]

      = 0.047 M/atm

Now we have to find the partial pressure of He

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

0.200 M = 0.047 M/atm × [tex]P_{\text{gas}}[/tex]

[tex]P_{\text{gas}} = \frac{0.200 M}{0.047\ \text{M/atm}}[/tex]

       = 4.25 atm

Thus from the above conclusion we can say that At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. 4.25 atm is the  partial pressure of He would give a solubility of 0.200 M.

Learn more about the Henry's Law here: https://brainly.com/question/23204201

#SPJ4

Other Questions
Determine the type of dilation shown and the scale factor used. What did Mr Jefferson say in the Declaration of Independence? What adaptations are suited to children with special needs? The "alum" used in cooking is potassium aluminum sulfate hydrate, KAl(SO4)2x H2O. To find the value of x, you can heat a sample of the compound to drive off all of the water and leave only KAl(SO4)2. Assume you heat 4.74 g of the hydrated compound and that the sample loses 2.16 g of water. What is the value of x? What are the benefits of lobbyists for politicians? Which one of the following has the cellular components arranged in order of increasing size?A) Amino acid < protein < mitochondrion < ribosomeB) Amino acid < protein < ribosome < mitochondrionC) Amino acid < ribosome < protein < mitochondrionD) Protein < amino acid < mitochondrion < ribosomeE) Protein < ribosome < mitochondrion < amino acid Y= and x=47X-5y?What is the answer Which of the following generalizations regarding discretionary delegated authority can be made from the data given: 1)Regulations have impeded the efficacy of federal agencies.2)Americans have had less access to benefits due to federal regulations.3)Regulations have created more advantages than expenses for Americans.4)Federal agencies have approved regulations that undermined their authority. What does Snowball mean in a relationship? The residents of a city voted on whether to raise property taxes. The ratio of yes votes to no votes was 7 to 5 If there were 4255 no votes, what was the total number of votes? what is 270 divided by 4.25 What is the table of 4? PLS HELP!! 15 points! Sofia earned a score of 460 on Exam A that had a mean of 400 and a standarddeviation of 20. She is about to take Exam B that has a mean of 100 and astandard deviation of 25. How well must Sofia score on Exam B in order to doequivalently well as she did on Exam A? Assume that scores on each exam arenormally distributed. Was Egypt Independent under Muhammad Ali? After school Andy spends 15 minutes on science homework 20 minutes on math homework 15 minutes on literature homework what was the ratio of the number of minutes she spends on on math homework to the total she spends on homework each night The graph below shows the percentages of ingredients in a salad mix.A pie chart titled Percentages in salad mix. 40 percent is iceberg, 27 percent is romaine, 15 percent is spinach, 12 percent is arugula, 6 percent is carrots.Alyssa buys a 38-ounce container of salad mix. About how many ounces of iceberg lettuce does the container have?8 ounces16 ounces27 ounces38 ounces What are the benefits of doing warm up and cool down exercises? 1. Why does the federalgovernment keeptrack of thepopulation ofAmerican Indians onreservations? What evidence suggests Neanderthals were like present-day humans? (Select all that apply.)lived in social groupsmade toolshunted large animalswore clothingburied their deadused metal toolsbuilt boats