If a lining is ciliated, what is it covered in?
mucous
O
Oskin
Ogrooves
hair

A sine wave is a periodic signal that can be measured in terms of it's amplitude, frequency and phase.

Sine waves have equal phase, frequency, and amplitude. The phase of a sine wave determines its position relative to a reference point in time, and a sine wave always starts at zero phase. The frequency of a sine wave is the number of cycles it completes in one second, and the amplitude of a sine wave is the maximum value it reaches. In a pure sine wave, these three properties are constant and equal.

Sine waves are analog signals and are commonly used in communication systems, audio and video processing, and electronic signal processing. They are also used in scientific and engineering applications, such as vibration analysis, acoustics, and control systems.

To know more about the sine wave, here

https://brainly.com/question/14979785

#SPJ4

--The complete question is, a sine wave is a periodic signal that, 1) can be measured in terms of it's amplitude, frequency and phase 2) has equal phase, frequency and amplitude 3) is digital or analog 4) has a maximum peak amplitude equal to it's frequency--

The gravitational force between the ball of mass 100 Kg and earth at a distance of 6.38 × 10⁶ m is 979.9 N.

The gravitational force is the force by which an object attracts other object into its center of mass. The gravitational force depends on the masses of the objects and distance between them by the equation written below:

Fg = G m1 m2/r²

where G is the universal gravitational constant equal to 6.67 × 10⁻¹¹ N/kg²m²

The gravitational force  is given 2.30 ×10⁻⁸ N.

distance  between the objects = 10 m.

then Fg = 6.67 × 10⁻¹¹ N × (100 kg × 5.98 ×10²⁴ kg)/(6.38 × 10⁶ m)² =  979.9 N

Therefore, the gravitational force between the ball and earth is 979.9 N. IN similar way, the force between any two objects can be determined using the given distance and mass.

Find more on gravitational force:

brainly.com/question/24783651

#SPJ9

Answer:

KE = 3456 J

Explanation:

This assertion is true: There is no electric field inside a hollow charged conductor.

Any sort of charge causes an electric field to be associated to a location in space. The strength and direction of the electric field are expressed by the value of E, also referred to as the electric field strength, electric field intensity, or simply the electric field.

The electric field is the region of space around an electrically charged particle or object where the charge body feels force. Examples: -Electric fields are created by charges and their configurations, such as capacitors and battery cells.

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ4

A single photon of violet color has the greatest amount of energy among the visible colors of the electromagnetic spectrum. This is because violet light has the shortest wavelength and the highest frequency among the visible colors.

According to the equation E = hf, where E is the energy of a photon, h is Planck's constant, and f is the frequency of the radiation ,Because the wavelengths of electromagnetic radiation are inversely proportional to their frequencies, according to the equation c = λf, where c is the speed of light, λ is the wavelength of the radiation, and f is its frequency. Therefore, photons of violet light, having the highest frequency, also have the highest energy.

To know more about Electromagnetic spectrum ,here

https://brainly.com/question/23727978

#SPJ4

The kinetic energy of the brick equal the elastic potential energy at the top of the hill. Using this, the speed of the brick is 14 m/s.

The elastic potential of a spring is directly proportional to the squire of the displacement.

Then,

p = 1/2 k x²

Given that, spring constant k = 500 N/m

height of the hill x = 2 m

weight of the load = 100 N

then mass = 100N/9.8 m/s² =10.20 Kg.

At the top of the hill, kinetic energy of the hill is equal to the elastic potential.

then, 1/2 mv² =  1/2 k x²

speed v of the brick  = √kx²/m

v = √(500 N/m × 2 m²/10.20 kg)

  = 14 m/s.

Therefore, the speed of the brick at the top of the hill is 14 m/s.

Find more on elastic potential :

https://brainly.com/question/12807194

#SPJ1

Suppose an object experiences a constant force of magnitude F. In that case, it accelerates according to Newton's second law of motion, which states that F = ma, where m is the mass of the object and a is its acceleration.

Given that the object experiences a constant force that produces an acceleration of 8 m/s^2, we can write:

F = ma = m × 8

What will the acceleration of this object be if the force is halved?

If the force is halved, the new force is F/2. Using Newton's second law, we can find the new acceleration as follows:

F/2 = ma_new

ma_new = (F/2) / m

ma_new = F/2m

ma_new = (m × 8) / 2m

ma_new = 4 m/s^2

Therefore, the object's acceleration will be 4 m/s^2 if the force is halved.

What will the acceleration of this object be if the mass is halved?

If the mass is halved, the new mass is m/2. Using Newton's second law, we can find the new acceleration as follows:

F = (m/2) × a_new

a_new = F / (m/2)

a_new = 2F/m

a_new = 2(m × 8)/m

a_new = 16 m/s^2

Therefore, the acceleration of the object will be 16 m/s^2 if the mass is halved.

If the force is halved and the mass is halved, the new force is F/2 and the new mass is m/2. Using Newton's second law, we can find the new acceleration as follows:

F/2 = (m/2) × a_new

a_new = (F/2) / (m/2)

a_new = F/m

a_new = (m × 8) / m

a_new = 8 m/s^2

Therefore, the object's acceleration will be 8 m/s^2 if the force is halved and the mass is halved.

To learn more about newton second law, visit here

https://brainly.com/question/4128948

#SPJ4

In order for the clown to land unharmed, the other clowns should hold the net at a point along the trajectory of the clown that is equal to the launch height of the clown.

The point can be calculated using the following equation:

Distance = velocity × time

Where velocity = 40 m/s and time = 2(velocity × sin(60o))/9.8 (where 9.8 is gravitational acceleration).

Therefore, the distance = 40 m/s × 2(40 m/s sin(60o))/9.8 = 80 m.

The other clowns should aim to place the net at a point that is 80 meters away from the cannon and at a height of 40 meters. This point should correspond to the apex of the trajectory, which is the highest point that the clown will reach when launched. The clowns should also make sure that the net is held at an angle of 30 degrees with respect to the horizontal, to ensure that the clown lands safely at the same level where it was launched.

To know more about velocity please refer:

https://brainly.com/question/30559316

#SPJ4

The temperature axis is the horizontal axis on a graph where the temperature values are plotted. In other words, it is the x-axis of a graph where the values on the x-axis represent different temperatures. The temperature axis is usually labeled with the units in which temperature is measured, such as degrees Celsius (°C), degrees Fahrenheit (°F), or Kelvin (K). The temperature axis is an important component of many scientific and engineering graphs, particularly those that involve the study of thermal properties and changes in temperature over time.

The plot should have the temperature on the x-axis and the pressure on the y-axis. The temperature axis should be labeled in degrees Celsius (°C) and the pressure axis should be labeled in units of pressure such as Pascals (Pa) or atmospheres (atm).

The data points should be plotted between 20°C and 60°C, with several points at different temperatures and corresponding pressures. These points should be labeled with their respective temperature and pressure values.

A line showing the ideal gas law should be plotted on the same graph. This line should be a smooth curve that passes through or near the data points. The equation of the ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the absolute temperature. When plotted on a pressure-temperature graph, the ideal gas law forms a straight line.

To know more about Temperature Axis, visit:

https://brainly.com/question/30593313

#SPJ4

300 N of force must be applied by the mechanic perpendicular to the end of the wrench.

The SI unit of force is the newton, denoted by the letter N. Base units that are pertinent to force are: The symbol for the length unit of a metre is m. the kilogramme (kg), a unit of mass. S represents the second, a measure of time.

The following formula can be used to resolve this issue:

Torque equals force times distance times sin (angle), where:

Torque is the 84 mN desired torque.

Force is the unknowable force that we must discover.

Distance is the length of the wrench in meters, which is 0.28 m

Angle is the angle between the wrench and the direction of the force, which is 90 degrees for a perpendicular force (sin(90) = 1)

Plugging in the values, we get:

84 mN = Force x 0.28 m x 1

Solving for Force, we get:

Force = 84 mN / 0.28 m

Force = 300 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

In the sentences for the telescope in the right-hand column from the first-hand column, the relevant blank has been filled.

Describe the telescope.

A telescope is the device used to show an enlarged view of a far-off object.

There are different types of telescopes, and each is used for a particular purpose.

The blank that should be filled in correctly from the first column is as follows:

1. Shorter (bluer) wavelengths of light have better angular resolution than longer (redder) wavelengths of light for the Hubble Space Telescope.

2. Huge reflecting telescopes are employed by the numerous research observatories on Mauna Kea.

3. The spectrograph, which divides light into its various colors, enables astronomers to ascertain the stellar composition as well as a number of other stellar characteristics.

4. The identical 10-m Keck

To learn more about the telescope here;

brainly.com/question/879

#SPJ1

The general formula for acceleration is:

[tex]a = (v_f - v_i) / t[/tex]

where a is the acceleration, [tex]v_f[/tex]  is the final velocity[tex], v_i[/tex] is the initial velocity, and t is the time interval during which the change in velocity occurs.

Acceleration is the rate of change of an object's velocity over time. It is a vector quantity that is defined as the change in velocity divided by the time interval during which the change occurs. Acceleration can be positive, negative, or zero, and it is measured in units of meters per second squared [tex](m/s^2).[/tex]

To find the time that has passed given the acceleration formula, we would need to rearrange the formula to solve for time "t" in terms of the other variables. For example, if we know the initial velocity, final velocity, and acceleration, we can use the formula to find the time interval during which the velocity changes.

Learn more about acceleration, here:

https://brainly.com/question/12550364

#SPJ9

A force that is inversely proportional to the distance of the object from equilibrium is consistent with simple harmonic motion.

Mathematically, the restoring force can be expressed as [tex]F = -kx,[/tex]

where F is the restoring force, x is the displacement from equilibrium, and k is the spring constant, which determines the strength of the restoring force. Negative sign indicates that the restoring force is opposite in direction to the displacement. If we rearrange this equation, we get x = -(1/k) * F, which shows that the displacement is inversely proportional to the force. Therefore, a force that is inversely proportional to the distance of the object from equilibrium is consistent with simple harmonic motion.

To know more about  Restoring force, here

https://brainly.com/question/12162527

#SPJ4

If a particle is moving along a straight line, the net change and the net displacement are always equal.

If a particle is moving along a straight line, then the net change and the net displacement are always the same. Net change is the total change in position of the particle, which is the final position minus the initial position. Net displacement, on the other hand, is the change in position of the particle in a particular direction, which is the final displacement minus the initial displacement.

When a particle moves along a straight line, the direction of its displacement is always the same as the direction of its motion. Therefore, the net displacement is simply the distance traveled by the particle in the direction of motion. And since the net change in position is also the distance traveled by the particle, the net change is always equal to the net displacement in this case.

To learn more about Net displacement Click here:

brainly.com/question/17355601

#SPJ4

A wire's resistance is inversely correlated with its cross-sectional area and inversely proportional to its length. Wire A will therefore have four times the area of Wire B if it is twice as long and twice as thick.

The distance between charged particles will increase as the conductor's cross-sectional area does. As a result, there will be less chance of electron collisions. As a result, resistance will decrease as the conductor's cross-sectional area increases.

It is inversely related to the wire's cross-sectional area. The resistance decreases with increasing wire cross-section area and increases with decreasing cross-section area.

to know more about wire resistance here:

brainly.com/question/29427458

#SPJ1

To lessen electrostatic attraction between them, the extra charges will be dispersed equally on the enormous conducting plates as widely as feasible.

a. When the battery is connected to the wires, the negatively charged electrons on the wire attached to the negative terminal of the battery will reject one another, driving them to spread as much as possible down the wire.

Positively charged holes (holes left over when electrons are missing) behave similarly to negatively charged holes in that they repel one another and spread out as much as possible down a wire connected to a positive terminal of a battery.

b. In order to prevent the battery from pushing more charge onto the plates, the extra charges on the plates will generate an electric field between them.

The back EMF, sometimes referred to as the counter EMF, grows as the charge on the plates rises. The back EMF will eventually equal the battery's EMF, at which time the battery will be unable to push any more charge onto the plates.

c. Yes, as the battery charges the plates, there will be a current going through the cables. The current is the passage of electrons from the battery's negative terminal onto the negative plate through the wire.

d. Because it shows how well the two plates can hold an electrical charge, much like a capacitor does, the amount C is known as capacitance.

Therefore, For a given voltage differential between the plates, the capacitance increases the amount of charge that may be stored.

Learn more about EMF here:

https://brainly.com/question/16626131

#SPJ4

The calculations in SI base units of 40 × 107 nm - 4 MJ dm will be [tex]13 X 10^1^5 W[/tex].

The present version of the metric system is called the International System of Units, also referred to as the SI system and abbreviated SI in all languages.

To convert the first quantity, 40 × 107 nm, to SI base units, we need to express it in meters (m).

Since 1 nm = [tex]10^{-9}[/tex] m, we can multiply 40 × 107 nm by [tex]10^{-9}[/tex] to obtain:

40 × 107 nm * [tex]10^{-9}[/tex] m/nm = 40 × 107 * [tex]10^{-9}[/tex] m = 4 × [tex]10^{-2}[/tex] m

Next, to convert the second quantity, 4 MJ, to SI base units, we need to express it in joules (J). Since 1 MJ = [tex]10^{6}[/tex] J, we can multiply 4 MJ by [tex]10^{6}[/tex] to obtain:

4 MJ x [tex]10^{6}[/tex] J/MJ = 4 x [tex]10^{6}[/tex] J = 4 × [tex]10^{6}[/tex] J

So, the expression 40 × 107 nm - 4 MJ can be expressed in SI base units as:

4 ×[tex]10^{-2}[/tex] m - 4 × [tex]10^{6}[/tex] J

To convert the first quantity, 13 PW, to SI base units, we need to express it in watts (W). Since 1 PW = [tex]10^{15}[/tex] W, we can multiply 13 PW by [tex]10^{15}[/tex] to obtain:

13 PW x [tex]10^{15}[/tex] W/PW = 13 x [tex]10^{15}[/tex] W = 13 × [tex]10^{15}[/tex] W

Next, to convert the second quantity, 3 ns, to SI base units, we need to express it in seconds. Since 1 ns = [tex]10^{-9}[/tex] s, we can multiply 3 ns by [tex]10^{-9}[/tex]to obtain:

3 ns x [tex]10^{-9}[/tex] s/ns = 3 x [tex]10^{-9}[/tex] s = 3 × [tex]10^{-9}[/tex] s

Finally, to convert the third quantity, 1 x 10³ Hz, to SI base units, we need to express it in hertz (Hz). Since the value is already in Hz, we don't need to perform any conversions:

1 x 10³ Hz = 1 × [tex]10^3[/tex] Hz

Thus, the expression 13 PW 3 ns. 1 x 10³ Hz can be expressed in SI base units as: 13 × 10^15 W * 3 × 10^(-9) s * 1 × 10^3 Hz.

For more details regarding SI unit, visit:

https://brainly.com/question/12750330

#SPJ9

The reaction to the action force of the impact of the ball against the player's glove is option B): "the force the glove exerts on the ball".

This is known as Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. So, as the ball exerts a force on the glove, the glove exerts an equal and opposite force on the ball, allowing the player to catch the ball. The other options listed (A, C, and D) are not directly related to the action-reaction force pair involved in the catch.

You can learn more about Newton's Third Law of Motion at

https://brainly.com/question/62770

#SPJ4

Based on the graphs in the figure, the motion of a car and a truck that initially alongside each other at time t = 0. And at time T, the distances traveled by the vehicles since time t = 0 is the car will have travelled further than the truck (option C)

Looking at the graph, the distance traveled by the truck and the car at time T = t is equal.

When T = t, the journey's duration and the speeds of the automobile and truck exactly match each other, as shown by the graph.

Consequently, if we take the equation into account;

V = Δs/Δt

Where;

v = velocity

s = the distance change

t = time change.

Given that the coordinates of velocity and time for the automobile and the truck match, the two objects have gone the same distance.

The area under the curve is used to calculate the mit. The truck would have traveled nearly half as far as the car, which will have traveled the greatest distance.

Learn more about speed here: https://brainly.com/question/30391003

#SPJ4

The formulated sentences for each will be:

A: If length is 5cm, width 2cm, height 4cm, volume:  40 cubic centimeters.

B: If the length is 3cm, width 4cm, height 2cm, then Volume is: 24 cubic centimeters.

C:  If the length is 6cm, width 2cm, height 3cm, the  volume is 36 cubic centimeters.

D:  If the length is 3cm, width 2cm, height 4cm, the  volume 24 cubic centimeters.

To calculate the volume of a rectangular prism using multiplication, you need to multiply the length, width, and height of the prism. The multiplication sentence for this is:

Volume = length (m) x width (m) x height (m)

For a. The multiplication sentence for calculating the volume of rectangular prism C is:

b. The multiplication sentence for calculating the volume of rectangular prism B is:

c. The multiplication sentence for calculating the volume of rectangular prism C is:

Lastly, for d. The multiplication sentence for calculating the volume of rectangular prism D is:

Learn more about rectangular prism from

https://brainly.com/question/477459
#SPJ1

a.) The acceleration of the cart can be calculated using the formula g = 9.8 m/s², where g is the acceleration due to gravity. a = F/m = m × g = 4.40 kg × 9.8 m/s² = 43.12 m/s²

b.) The time it takes the cart to travel from the starting point to the ending point can be calculated using the kinematic equation:

d = v_0t + 1/2at²,

366 m - 53 m = 313 m

313 = 0t + 1/2(43.12)t² = 1/2(43.12)t²

313 = 21.56t²,  t² = 313 / 21.56

t² = 14.52, t = √14.52 = 3.8 sec.

c.) The acceleration of the cylinder can be calculated using the formula a = g - (v²)/Rg

d.) The time it takes the cylinder to travel from the top of the ramp to the bottom can be calculated using the kinematic equation:

d = v_0t + 1/2at²,

What is acceleration?

To know more about acceleration, click the link given below:

brainly.com/question/14344386

#SPJ1

Displacement is expressed magnitude and a direction in m, km, ft etc. Among the given options, the one indicting a displacement is 40 km southwest.

Displacement is a physical quantity measuring how far an object is travelling and in which direction from the initial position. The displacement is a vector quantity having both magnitude and direction.

Displacement can be expressed in different units such as m, km, ft etc. Here, 32 ft/s²  and 9.8 m/s² are acceleration. 120 m/s is velocity. Then, 186000 ml is expressing volume of a substance.

Therefore, among the given options, 40 km southwest is indicating the displacement of an object with its magnitude and direction. 40 Km is magnitude and southwest is the direction.

Find more on displacement.

https://brainly.com/question/28609499

#SPJ1

Answer:

  2.32 m/s

Explanation:

If an 8.90 kg block of ice slides down a 1.15 m frictionless ramp to reach a speed of 2.87 m/s, you want to know its final speed if there were friction opposing the motion with a force of 11.0 N.

The kinetic energy at the bottom of the frictionless ramp is ...

  KE = 1/2mv²

  KE = 1/2(8.90 kg)(2.87 m/s)² = 36.654205 J

When friction is introduced, the work done to oppose the friction is ...

  W = Fd

  W = (11 N)(1.15 m) = 12.65 J

Hence the remaining energy of the block at the bottom of the ramp with friction is ...

  KE' = 36.654205 -12.65 J = 24.004205 J

This corresponds to a speed of ...

  v = √(2·KE/m) = √(2·24.004205/8.9) ≈ 2.32 . . . . m/s

The speed at the bottom of the ramp with friction is about 2.32 m/s.

__

Additional comment

We can find the slope of the ramp by equating the ending kinetic energy to the beginning potential energy. As you can see, that is not relevant to the problem, since the opposing force is parallel to the ramp.

Answer:

Explanation:

To determine the acceleration of the sled, we need to balance the net force acting on it with its weight.

The weight of the sled and person is given by:

Weight (W) = mass (m) x acceleration due to gravity (g) = 48 kg x 9.8 m/s^2 = 470.4 N

The weight acts vertically downward, perpendicular to the slope of the hill. The net force acting on the sled can be found by subtracting the force of friction from the thrust:

Net force (F) = thrust (T) - weight (W) x sin(θ)

where θ is the angle between the horizontal and the slope of the hill, given as 16.2°.

The force of friction is zero in this case, as the sled is moving up a frictionless icy hill.

So, the net force is simply equal to the thrust:

Net force (F) = thrust (T) = 431 N

The acceleration of the sled is given by:

acceleration (a) = net force (F) / mass (m) = 431 N / 48 kg = 9 m/s^2

Therefore, the magnitude of the acceleration of the sled while it travels up the hill is 9 m/s^2.

The velocity distribution in the fluid can be found using the Navier-Stokes equation, which states that the net force on a fluid element is equal to its mass times its acceleration.

(a) Velocity distribution and torques on two coaxial cylinders:

The fluid is incompressible, so the continuity equation can be used to relate the fluid velocities at different radii. For the coaxial cylinders, the velocity distribution can be found by assuming a linear velocity profile between the two surfaces, where the velocity at the inner surface is ai * kr and the velocity at the outer surface is a * r. Therefore, the velocity profile is given by:

v(r) = (a - ai) / (r - kr) * (r - kr) + ai * kr

The torque required to maintain the motion of the cylinders can be found using the formula:

T = I * α

where T is the torque, I is the moment of inertia, and α is the angular acceleration. For each cylinder, the moment of inertia is given by:

I = (1/2) * m * R²

where m is the mass of the cylinder and R is its radius. The angular acceleration is related to the angular velocity by:

alpha = (a - ai) / (r - kr)

Therefore, the torque on the inner cylinder is:

Ti = (1/2) * m * kr² * (a - ai) / (r - kr)

and the torque on the outer cylinder is:

To = (1/2) * m * r² * (a - ai) / (r - kr)

(b) Velocity distribution and torques on two concentric spheres:

The velocity distribution and torques on two concentric spheres can be found in a similar way to the coaxial cylinders. Assuming a linear velocity profile between the two spheres, where the velocity at the inner sphere is ai * kr and the velocity at the outer sphere is a * r, the velocity profile is given by:

v(r) = (a - ai) / (r - kr) * (r - kr) + ai * kr

The torque required to maintain the motion of the spheres can be found using the same formula as for the cylinders, with the moment of inertia for each sphere given by:

I = (2/5) * m * R²

where m is the mass of the sphere and R is its radius. Therefore, the torque on the inner sphere is:

Ti = (2/5) * m * kr² * (a - ai) / (r - kr)

and the torque on the outer sphere is:

To = (2/5) * m * r² * (a - ai) / (r - kr)

Learn more about torque here brainly.com/question/29024338

#SPJ4

The combined mass of the six blocks of steel on the Moon would be 10.0kg. This is because the gravitational force on the Moon is only one sixth of the gravitational force on Earth, meaning that the mass of the blocks would be correspondingly reduced. On the Moon, the blocks of steel would weigh only 1.67 kg each, for a total mass of 10.0kg.

The effect of the reduced gravity on the blocks of steel is due to the inverse square law of gravitation. This law states that the force of gravity between two objects is inversely proportional to the square of the distance between them. Since the Moon is much farther away from the Earth than the blocks of steel were on Earth, the gravitational force on the blocks is much weaker. The reduced gravitational force on the Moon means that the six blocks of steel have a collective mass of 10.0kg. This mass is significantly lower than their combined mass of 60 kg on Earth, which is due to the inverse square law of gravitation.

To learn more about gravitational

brainly.com/question/3009841

#SPJ4

The six steel blocks on the Moon would weigh a total of 10.0kg. This is due to the fact that the gravitational force on the Moon is only one sixth that on Earth, which implies that the mass of the blocks would be lowered accordingly.

The steel blocks would only weigh 1.67 kg each, for a total mass of 10.0 kg, on the Moon.

The inverse square law of gravitation is what causes the steel blocks to be affected by the decreasing gravity. According to this rule, the force of gravity is inversely proportional to the square of the distance between two objects. The gravitational pull on the steel blocks is much weaker on the Moon since it is much further away from the Earth than the steel blocks were on Earth. The six steel blocks weigh a total of 10.0 kg due to the Moon's lower gravitational pull. The inverse square law of gravitation explains why this mass is far smaller than their total mass of 60 kg on Earth.

Learn more about mass here brainly.com/question/19694949

#SPJ4

The force diagrams that may possibly correspond to the situation at point A on the motion diagram are 356.

A force diagram, also known as a free-body diagram, is a graphical representation that shows the forces, moments, and reactions acting on a body under a specific state. It shows a body or group of connected bodies along with all the applied forces, times, and reactions that the bodies experience.

At point A in the motion diagram, the force acting at point A are as follows:

Hence, the correct diagrams are 3, 5, and 6.

Learn more about force diagrams at: https://brainly.com/question/29991414

#SPJ1

The only force operating on the ball once it has left its racquet is gravity, which the earth exerts on everything in its immediate vicinity. The ball is accelerated vertically by gravity at a velocity of around 9.8 m/s. ^2,

Hit into their deuce back for the opening point while standing on the right side of the center line; for the second part, serve from of the left side toward what is identified as the advantages service box. Until the game is won, the same player serves; after that, the other player takes over as the server.

In the middle ages, tennis score were shown on two watch faces that ranged from 0 to 60. The pointer changed position on each score, going from Zero to 15, 30, 45, and 60 for a victory.

To know more about gravity visit :

https://brainly.com/question/14874038

#SPJ4

The given statement " Living cells contribute to the turbidity of a culture, and this contribution can be a disadvantage of the indirect spectrophotometer method, is True.

The indirect spectrophotometer method, which measures the turbidity of a culture to estimate cell density, assumes that the only contributor to turbidity is the cells themselves. However, other factors such as debris, bubbles, and extracellular materials can also contribute to the turbidity, leading to inaccuracies in cell density measurements. In microbiology, turbidity is a measure of the cloudiness or haziness of a liquid culture, and it is often used as an indirect measure of cell density. The more cells there are in the culture, the more turbid it will appear.

To know more about turbidity, here

https://brainly.com/question/26612834

#SPJ4