If a person visits an exercise facility, buys a new piece of fitness/sporting equipment,or just starts planning to be active, which of the five stages of change for physicalactivity are they at?PlanningMaintenancePrecontemplationContemplation

Tension and compression forces act on diagonal and vertical members respectively in a truss structure.

A truss is a construction that comprises of a progression of interconnected triangles, intended to disperse stacks and give security. The powers that follow up on a bracket can be characterized into two kinds: pressure and pressure powers.

Tension powers are powers that draw on a part, like a rope or link. In a support, strain powers follow up on the corner to corner individuals that structure the triangles. These individuals are under pressure since they are being pulled separated.

Compression forces are forces that push on a part, like a segment or shaft. In a support, pressure powers follow up on the upward individuals that associate the top and base harmonies of the bracket. These individuals are under pressure since they are being crushed together.

Notwithstanding pressure and pressure powers, brackets can likewise be exposed to twisting minutes and shear powers, which are brought about by outer burdens following up on the support.

To learn more about truss, refer:

https://brainly.com/question/17001182

#SPJ4

The formula of a spring-mass-damper system is given by md2x/dt2 + cdx/dt + kx = F(t).

The spring-mass-damper system is a common model used in physics and engineering to describe the behavior of various mechanical systems, such as a car suspension system or a building during an earthquake. The equation of motion for a spring-mass-damper system is typically given by:

md2x/dt2 + cdx/dt + kx = F(t)

where m is the mass of the object attached to the spring and damper, x is the displacement of the mass from its equilibrium position, t is time, c is the damping coefficient, k is the spring constant, and F(t) is an external force applied to the system at time t.

The term md2x/dt2 represents the acceleration of the mass, while cdx/dt represents the damping force (i.e. resistance to motion) caused by the damper, and kx represents the force exerted by the spring. The external force F(t) can be any force applied to the system, such as an oscillating force or a constant force.

The solution to this differential equation depends on the initial conditions (i.e. the initial position and velocity of the mass) and the specific values of the parameters m, c, and k. The behavior of the system can be analyzed using various techniques, such as finding the natural frequency of the system or using numerical simulations to model the motion over time.

For such more questions on Equilibrium

https://brainly.com/question/517289

#SPJ4

The magnetic field at a point 1.0 cm from the central axis of the solenoid is 1.6 x 10^-3 T.

The magnetic field (B) inside a solenoid can be calculated using the formula:

B = μ_0 * n * I / L

where μ_0 is the vacuum permeability (4π x 10^-7 T m/A), n is the number of turns per unit length, I is the current in the solenoid, and L is the length of the solenoid.

For the given solenoid, the number of turns per unit length can be calculated as follows:

n = 800 turns / 0.5 m

n = 1600 turns/m

At a point 1.0 cm from the central axis of the solenoid, the magnetic field can be calculated as follows:

B = μ_0 * 1600 turns/m * 12 A / (0.05 m)

B = 1.6 x 10^-3 T.

To learn more about Magnetic field :

https://brainly.com/question/15087940

#SPJ4

Answer:

He used a prism.

Explanation:

Newton set up a prism near his window, and projected a beautiful color spectrum 22 feet onto the far wall.

The theory of change Lewin is a framework used to analyze and understand how a certain change can be achieved in a given situation.

The theory of change Lewin was developed by Kurt Lewin, a social psychologist who studied how to bring about change in organizations and communities. The theory explains that any change process involves three main stages: unfreezing, changing, and refreezing.

Unfreezing is when people become aware that change is necessary and are willing to let go of old habits and beliefs. Changing is the actual implementation of new behaviors and practices. Refreezing is when the new behaviors become the norm and are reinforced to ensure sustainability.

To know more about the Lewin, here

brainly.com/question/27334968

#SPJ4

One type of evidence that the Earth has been through colder conditions is the presence of glacial deposits, such as till, striations, and moraines.

Glacial deposit refers to the material that has been deposited by a glacier, either through direct contact or through the action of meltwater.

This material can include rock fragments of various sizes, ranging from fine-grained clay to large boulders, as well as sand and gravel. In some cases, the material may be sorted into distinctive layers, depending on the size and type of the particles.

Glacial deposits can be found in areas that were covered by ice during the last ice age, as well as in areas that are currently covered by glaciers. They provide important clues about the movement and behavior of glaciers and can also be valuable resources for construction and other industries.

Learn more about Glacial deposits here: https://brainly.com/question/1887486

#SPJ1

According to the question the magnitude of the velocity is 2π m/s.

Magnitude is a measure of the size or intensity of something. It is often used to describe the size and intensity of physical phenomena such as earthquakes, floods, and hurricanes. Magnitude is usually measured in terms of a numerical scale, where a higher number indicates a higher level of intensity. Magnitude is a relative measure, meaning that it is measured in comparison to other phenomena of the same type. For example, a magnitude 5 earthquake is five times more intense than a magnitude 4 earthquake. The magnitude of some phenomena like wind speed, solar radiation, and temperature can also be measured in terms of their absolute values.

This can be calculated using the formula V = 2πr/T,
where V is the velocity,
r is the radius, and T is the period.
In this case, r is 1 m, and T is 4 s,
so V = 2π/4 = 2π m/s.

To learn more about magnitude
https://brainly.com/question/30337362
#SPJ4

The velocity of the car at position B would be 34.7 m/s.

The energy of the body due to its position in relative to earth is called potential energy.

Given is that a roller coaster car of mass m = 200 kg is released from rest at the top of a 60m high hill (position A), and rolls with negligible friction down the hill, through a circular loop of radius 20 m (positions B, C, and D), and along a horizontal track (to position E).

From the energy conservation, we can write -

mgh = 1/2 mv²

60 x 10 x 200 = 1/2 x 200 x v²

v² = 1200

v = √1200

v = 34.7 m/s

Therefore, the velocity of the car at position B would be 34.7 m/s.

To solve more questions on energy conservation, visit the link below -

https://brainly.com/question/2137260

#SPJ9

A star that begins with a mass between about 8 and 20 times the Sun's mass will end up with a core that is too massive to be supported by electron pressure. Such a star comes to a violent end. Neutron star form when fusion ends.

What is a neutron star?

To know more about neutron star, click the link given below:

https://brainly.com/question/1322201

#SPJ1

To solve this problem, we need to use the ideal gas law, which states that the pressure (P), volume (V), number of moles of gas (n), and temperature (T) of a gas are related by the equation PV = nRT.

P1V1/T1 = P2V2/T2

Inputting the values provided yields:

P1V1/T1 = P2V2/T2

V₁/T₁ = V₂/T₂

Inputting the values provided yields:

V2 = V1 (318.15 K/293.15 K) (T2/T1) = 35.0 L 38.1 L

The balloon's new capacity is 38.1 L as a result.

To know more about ideal gas law , check out :

https://brainly.com/question/4147359

#SPJ4

False. Under electrostatic conditions, there is no electric field inside a solid conductor only if the conductor is in a state of electrostatic equilibrium. In other words, if the conductor is charged, there will be an electric field inside the conductor, but it will decrease rapidly as you move away from the surface of the conductor.

The electric field is a field that represents the force that would be exerted on a charged particle at a particular point in space. It is a measure of the intensity of the electric force that a charged object would experience if placed at that point in space.

The electric field can be represented mathematically as a vector field and is typically denoted by the symbol "E". It is a measure of the force per unit charge and has units of volts per meter (V/m). The direction of the electric field at a particular point is the direction of the force that would be exerted on a positive test charge placed at that point.

Electric fields are a fundamental concept in electricity and electromagnetism and play an important role in a wide range of applications, including electric motors, generators, and electronic devices. They are used to describe the behavior of charged particles and the interactions between charged particles, and are an essential tool for understanding and describing the behavior of electric and magnetic fields.

TO know more about electric field ,visit:

https://brainly.com/question/8971780

#SPJ4

The change in the period with respect to the semi major axis tells that  as the semi major axis of an object's orbit increases, its period will increase as well. (Kepler's Third Law of Planetary Motion)

Kepler's Third Law of Planetary Motion, also known as the "Harmonic Law," states that the square of the period of an object in orbit around a central body is proportional to the cube of its semi major axis. In other words, the longer the average distance of an object from the central body, the longer its orbital period will be.

This law applies to all objects in orbit around a central body, including planets, moons, asteroids, and comets. It is based on the laws of gravitation and provides important information about the dynamics of objects in orbit. By using this law, we can calculate the average distance of an object from a central body, its orbital period, and other orbital characteristics.

The relationship can be expressed as:

[tex]T^2 = k * a^3[/tex]

where T is the period of the object, a is its semi major axis, and k is a constant of proportionality.

Therefore, a change in the period with respect to the semi major axis can provide information about the dependence of the period on the semi major axis, specifically that the period increases as the semi major axis increases. This relationship is a direct result of Kepler's Third Law and the laws of gravitation, and provides important insights into the behaviour of objects in orbit.

To know more about Kepler's Third Law of Planetary Motion, visit:

https://brainly.com/question/777046

#SPJ4

Precession is the change in direction of axis without change in tilt. Whereas nutation is the rocking, swaying, or nodding motion in the axis of rotation.

Precession and nutation are due to gravity of nearer Earth and farther Sun on the Earth that varies with changing distance. The inclination 5 deg of orbital plane of Moon to the Earth's orbital plane and the inclination of equatorial bulge of the Earth at 23.4 deg to ecliptic are also contributors.

Period of long-term precession motion is about 260 centuries. In this motion, poles trace small circle of radius almost 2530 km, about normal to ecliptic. The short-term nutation (nodding) of polar axis is having compounded period of almost 18.6 years from oscillations with smaller periods up to as low as some days.

To know more about precession and nutation, refer

https://brainly.com/question/28587498

#SPJ4

The most likely reason for apparent lack of motion is that the stars are too far away to measure their parallax.

Reason for apparent lack of motion is that stars are too far away to measure their parallax.

Stellar parallax is the apparent shift in star's position due to the Earth's motion around the Sun. Size of this shift is proportional to the distance of  star, so it is easier to measure parallax for stars that are closer to us. For stars that are too far away, parallax is too small to measure with the current technology and they appear to be fixed in place. So, lack of apparent motion for stars over the course of a year could be due to the great distances from Earth and making it difficult to detect their parallax.

To know more about parallax, refer

https://brainly.com/question/29210252

#SPJ4

The most likely reason for apparent lack of motion is that the stars are too far away to measure their parallax. What is the reason for this apparent lack of motion?Reason for apparent lack of motion is that stars are too far away to measure their parallax. Stellar parallax is the apparent shift in star's position due to the Earth's motion around the Sun. Size of this shift is proportional to the distance of  star, so it is easier to measure parallax for stars that are closer to us. For stars that are too far away, parallax is too small to measure with the current technology and they appear to be fixed in place. So, lack of apparent motion for stars over the course of a year could be due to the great distances from Earth and making it difficult to detect their parallax.To know more about parallax, refer

True.

Early February is halfway between the winter solstice and the spring equinox in the Northern Hemisphere.

The winter solstice occurs around December 21st or 22nd and marks the shortest day and longest night of the year. The spring equinox occurs around March 20th or 21st and marks the start of spring, when the day and night are roughly equal in length. Halfway between these two events is approximately February 10th, marking the gradual shift from winter to spring.

The winter solstice marks the point when the sun is at its farthest point from the equator and the Northern Hemisphere is tilted away from the sun, causing the shortest day and longest night of the year. On the other hand, the spring equinox marks the point when the sun is directly over the equator and the day and night are approximately equal in length.

Halfway between the winter solstice and the spring equinox is a time when the days start to get noticeably longer and the sun rises higher in the sky, signaling the end of winter and the beginning of spring. This is a gradual transition and not a sudden change. In early February, the sun rises earlier and sets later, and the length of daylight continues to increase until the spring equinox.

In the Northern Hemisphere, early February is a time when the weather starts to warm up and the first signs of spring become visible, such as the emergence of buds on trees and the first crocus flowers in gardens. However, it is still winter and the weather can be cold and wintry.

In the Southern Hemisphere, early February is the height of summer, with warm temperatures and longer daylight hours. This is the opposite of the Northern Hemisphere, where it is the height of winter.

To know more about solstice & equinox, visit:

brainly.com/question/11549647

#SPJ4

the car's angle of travel be when its entire acceleration is 2.2m/s2 = 23.58°

Acceleration is the change in speed that occurs quickly. Generally speaking, but not always, acceleration denotes a shift in speed. Even while it travels in a circular motion, an object's velocity direction is changing, thus it keeps gaining speed.

In physics, acceleration is the rate at which an object's velocity varies in relation to time. The result of all forces acting on an item is its acceleration, according to Newton's Second Law. The SI unit for acceleration is the metre squared (m s2).

Tangential acceleration,  at = 1.2 m/s²

Total acceleration, a = 3 m/s²

Let the angle is Ф.

According to the formula

a² = a[tex]_t[/tex]² +  ar²

9 = (1.2)² + ar²

ar =3 m/s²m

tanФ = 0.4364

Ф = 23.58°

the car's angle of travel be when its entire acceleration is 2.2m/s2 = 23.58°

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

I would look for these wavelengths since exploding stars mostly produce gamma-rays and X-rays.

Two primary instruments make up the Fermi telescope. It has a sizable telescope that discovers gamma rays with energies between 10 million and 300 billion times that of visible light. Moreover, the spacecraft carries detectors for observing gamma-ray bursts. Gamma ray bursts are short gamma ray flashes.

IR perspective Dust is significantly easier for infrared light to penetrate than optical light. For this reason, infrared astronomy is best suited for gaining knowledge of the universe's dusty regions. Star-forming areas are one instance.

To know more about gamma rays visit:

https://brainly.com/question/23281551

#SPJ4

Answer:

Viking 1 had reached a top speed of over 4 kilometers per second, or almost 9000 miles per hour. This is a fair bit over 10 times the speed of sound (in air), making it well over supersonic speeds.

Speed of the bricks at the top of hill is 6.26 m/s. c.)speed of the bricks at the top of hill is 14.14 m/s. d)minimum compression of spring necessary to get to the top of hill is 6.26 m. e) speed of the bricks at the top of hill with 2 m of initial compression and 15% energy dissipation is 13.04 m/s.

The capacity or power to do work, such as the capacity to move an object by application of force is called energy.

Initial potential energy of compressed spring is:

Ep = 1/2 kx^2 = 1/2 * 500 N/m * (2 m)^2 = 1000 J

k is spring constant, x is compression of the spring, and J is unit of energy in joules.

Final potential energy of the bricks is:

Ep = mgh = 100 N * 9.81 m/s^2 * 2 m = 1962 J

Ep = Ep

1/2 kx^2 = mgh

v = sqrt(2gh) = sqrt(2 * 9.81 m/s^2 * 2 m) = 6.26 m/s

Therefore, the speed of the bricks at the top of the hill is 6.26 m/s.

c.  Initial potential energy of compressed spring is: 1000 J

Ek = Ep = 1000 J

Kinetic energy of the bricks is given by:

Ek = 1/2 mv^2

1000 J = 1/2 * 100 N * v^2

v = sqrt(200 / 1) = 14.14 m/s

Therefore, the speed of the bricks at the top of the hill is 14.14 m/s.

d.  As, Ep = m g h

where m is mass of the bricks, g is acceleration due to gravity, and h is  height of the hill.

Ep = 100 N * 9.81 m/s^2 * 2 m = 1962 J

Ep = 1/2 kx^2 = 1962 J

1/2 * 500 N/m * x^2 = 1962 J

x = sqrt(2 * 1962 J / 500 N/m) = 6.26 m

Therefore, the minimum compression of the spring necessary to get to the top of the hill is 6.26 m.

e. If 15% of the energy is dissipated through friction, final kinetic energy of the bricks at the top of the hill will be 85% of initial potential energy of the compressed spring. Therefore,

0.85 * 1000 J = 1/2 mv^2

v = sqrt(170 / 1) = 13.04 m/s

Therefore, the speed of the bricks at the top of the hill with 2 m of initial compression and 15% energy dissipation is 13.04 m/s.

To know more about energy, refer

https://brainly.com/question/13881533

#SPJ1

Answer:

  58.7Ω

Explanation:

You want the equivalent resistance of 40Ω in series with the parallel combination of 25.4Ω and 70.8Ω.

The equivalent resistance of two parallel resistors, r1 and r2 is ...

  req = 1/(1/r1 +1/r2)

For the two given parallel resistors, that is ...

  1/(1/25.4 +1/70.8) ≈ 18.69 . . . . ohms

The circuit has a 40Ω resistor in series with this, so the equivalen resistance is ...

  40 +18.69 = 58.69Ω ≈ 58.7Ω

__

Additional comment

Since the given resistor values are expressed to 0.1 ohms, we have rounded the answer to the same precision. The exact value is 141158/2405 as shown in the calculator display—assuming the given values are exact.

The reaction is at equilibrium are option a, c, d. The reaction is not at equilibrium are choices b, e. The reaction that may or may not be at equilibrium are choices f.

a. The forward and reverse reactions occur at equal rates. - The reaction is at equilibrium.

b. The concentration of reactants is slowly increasing. - The reaction is not at equilibrium.

c. The products and reactants have equal concentrations. - The reaction is at equilibrium.

d. The concentration of products and reactants are constant. - The reaction is at equilibrium.

e. The concentrations of products is greater than the concentration of reactants. - The reaction is not at equilibrium.

f. The forward reaction is occurring at a very slow rate. - It is not possible to determine the equilibrium state of the reaction as the rate of the forward reaction depends on the concentration of the reactants and the activation energy of the reaction.

To know more about the equilibrium, here

brainly.com/question/12920261

#SPJ4

--The complete question is, Classify the conditions given as indicating that a reaction is at equilibrium, is not at equilibrium, or that the conditions may occur in either state.

a. The forward and reverse reactions occur at equal rates.

b. The concentration of reactants is slowly increasing.

c. The products and reactants have equal concentrations.

d. The concentration of products and reactants are constant

e. The concentrations of products is greater than the concentration of reactants

f. The forward reaction is occurring at a very slow rate.--

The reaction temperature will be maintained at approximately 100°C when heating the reaction mixture at reflux.

Reflux is a common technique in organic chemistry where a reaction mixture is heated at a temperature near its boiling point, with the vapor generated by the reaction being condensed and returned to the reaction flask. This maintains the temperature of the reaction mixture at a constant value, typically near the boiling point of the solvent used in the reaction.

In general, the temperature of a reflux reaction will depend on the boiling point of the solvent used. If the solvent has a boiling point of 100°C, for example, then the reaction temperature will be maintained at approximately 100°C when the reaction mixture is heated at reflux.

To know more about Reflux, visit:

brainly.com/question/14747793

#SPJ4

Copernicus proposed the heliocentric theory of the solar system, in which the sun is positioned at the system's centre.

In his heliocentric theory, Copernicus predicted the arrangement of all known planets and calculated their average orbital periods around the sun.He was also effective in explaining the everyday motions of heavenly bodies, such as the sun's rising and setting, with this idea.He said that the sun is fixed and situated at the centre of the solar system under this hypothesis.This model provided a mathematical explanation for the apparent daily motion of the stars and planets, and it also allowed for better predictions of their positions in the sky.

read more about Copernicus here

https://brainly.com/question/926131

#SPJ4

The types of radiation, ranked in order of their energy from least to greatest are:

It's important to note that these types of radiation form a continuous spectrum, with the boundaries between each type of radiation being somewhat arbitrary. The amount of energy in a particular type of radiation depends on its frequency or wavelength. In general, radiation with higher frequency or shorter wavelength has more energy than radiation with lower frequency or longer wavelength.

Radiation refers to the emission of energy as electromagnetic waves or as moving subatomic particles, especially high-energy particles that cause ionization.

To know more about Radiation, visit:

brainly.com/question/893656

#SPJ4

Given:

[tex]m=0.40kg[/tex]

[tex]k=160\frac{N}{m}[/tex]

[tex]A=0.10m[/tex]

We know that the velocity of a mass attached to a spring is greatest when passing through equilibrium. Using the following formulas we can compute velocity.

[tex]v_{max} =\pm Aw[/tex] and [tex]w=\sqrt{\frac{k}{m} }[/tex]  [tex]\Longrightarrow v_{max} =\pm A\sqrt{\frac{k}{m} }[/tex]

[tex]\Longrightarrow v_{max} =\pm A\sqrt{\frac{k}{m} }[/tex]

[tex]\Longrightarrow v_{max} =\pm (0.10)\sqrt{\frac{160}{0.40} }[/tex]

[tex]\Longrightarrow v_{max} =\pm (0.10)(20) }[/tex]

[tex]\Longrightarrow v_{max} =\pm 2.0\frac{m}{s}[/tex]  

Answer: Evaporation happens when a liquid substance becomes a gas. When water is heated, it evaporates. The molecules move and vibrate so quickly that they escape into the atmosphere as molecules of water vapor

Explanation: Evaporation is simply the heating of water to turn it to gas,like when you boil water in a kettle,that process is defined as evaporation

The work done on the box by the static friction force is zero.

Work is a measure of the energy transferred to or from an object by a force when the object is displaced. The amount of work done is defined as the product of the magnitude of the force and the distance over which the force is applied. It could be written as

Work (W) = Force (F) x Distance (d) x cos(theta)

where theta is the angle between the force and the displacement.

When a force is applied to an object, work is done if there is displacement in the direction of the force. If there is no displacement, no work is done. If the force is perpendicular to the displacement, no work is done, as the cosine of 90 degrees is zero.

Work is a scalar quantity and is measured in joules (J) in the SI system. One joule of work is done when a force of one newton (N) is applied over a distance of one meter (m) in the direction of the force.

Work can be either positive or negative, depending on the direction of the force and the displacement. When the force and displacement are in the same direction, the work is positive. When the force and displacement are in opposite directions, the work is negative.

The work done on the box by the static friction force is zero.

This is because the static friction force acts perpendicular to the displacement of the box. Therefore, the angle between the static friction force and the displacement of the box is 90 degrees. In this case, the work done by the static friction force is given by the dot product of the force and the displacement, which is equal to Fdcos(theta), where theta is the angle between the force and the displacement. Since cos(90) = 0, the work done by the static friction force is zero.

Note that although the static friction force does no work on the box, it does provide the necessary force to keep the box in place and prevent it from sliding around as the truck accelerates.

To know more about Work done, visit:

https://brainly.com/question/25573309

#SPJ4

The Sun is tons large than the Earth, with a radius of about 695,700 kilometers, while the earth has a radius of around 6,371 kilometers.

Because of this, the Sun's radius is greater than one hundred times larger than the earth's. The size difference between the Sun and the earth is quite massive.

In fact, if you have been to compare the sizes of the 2 items visually, the sun might appear as a huge, sparkling ball in the sky, while the earth might be just a tiny dot in contrast.

The sun's gigantic size performs a crucial position in the formation and renovation of our sun machine. Its gravity is chargeable for keeping all the planets in orbit, inclusive of the earth.

Additionally, the sun's excessive warmth and radiation provide the electricity important for existence to exist in the world. Standard, the sun's radius is an awful lot larger than earth's, and this size distinction has essential implications for the structure and behavior of our solar gadget.

Learn more about Earth:

https://brainly.com/question/12041467

#SPJ4

The magnitude of the acceleration of the object is 17.6 m/s2 and the direction is 30.2° relative to the x axis.

Acceleration is the rate if we object increases speed velocity of rate and change it is the change of the position of an object is relation can be either positive when the speed of an object increasing a negative in the speed of the object is decreasing.

The magnitude and direction of the acceleration of the object can be found by using Newton's Second Law of Motion. Newton's Second Law states that the net force on an object is equal to the mass of the object multiplied by its acceleration. Therefore, the net force of the two forces acting on the object (F1 and F2) can be found using the equation: Fnet = ma.

For this problem, we can assume that the mass of the object is 3.00 kg, so the equation becomes: Fnet = 3.00 kg × a.

We can now solve for the acceleration by substituting the values of the two forces (F1 and F2) into the equation. The two forces can be found by using the equation for the magnitude of a force: F = ma.

For force F1, we can assume that its magnitude is 10 N and its direction is 45° relative to the x axis. Therefore, the equation for F1 becomes: F1 = (3.00 kg) × (10 N) × cos(45°).

For force F2, we can assume that its magnitude is 8 N and its direction is -30° relative to the x axis. Therefore, the equation for F2 becomes: F2 = (3.00 kg) × (8 N) × cos(-30°).

Substituting these two equations into the equation for net force (Fnet = ma), we get:

Fnet = (3.00 kg) × (10 N × cos(45°) + 8 N × cos(-30°)).

Solving for the acceleration, we get: a = (10 N × cos(45°) + 8 N × cos(-30°))/3.00 kg.

Therefore, the magnitude of the acceleration of the object is 17.6 m/s2 and the direction is 30.2° relative to the x axis.

To know more about accelaration click-
https://brainly.com/question/605631
#SPJ4