If AH=13mm, A F=15mm, and FC=37mm, what would be the distance between A and D? Round your answer to two decimal places if necessary.

If AH=13mm, A F=15mm, And FC=37mm, What Would Be The Distance Between A And D? Round Your Answer To Two

Answers

Answer 1

The measure of segment AD in the similar triangle is 45.07 mm

What are similar triangles?

Two triangles are said to be similar if they have the same shape and the ratio of their corresponding sides are in the same proportion. Also, their corresponding angles are congruent.

Triangle FEA and triangle ABC are similar triangles by the angle angle similarity postulate, therefore:

13/AD = 15 / (15 + 37)

AD = 45.07 mm

The measure of segment AD in the similar triangle is 45.07 mm

Find out more on similar triangles at: https://brainly.com/question/2644832

#SPJ1


Related Questions

Verify the Divergence Theorem for the vector field F = (x − z)i + (y − x)j + (z 2 − y)k where R is the region bounded by z = 16 − x 2 − y 2 and z = 0. (Note that the surface may be decomposed into two smooth pieces.) Including both left hand side and right hand side to verify Divergence Theorem.

Answers

Answer: To apply the divergence theorem, we need to find the divergence of the vector field F.

∇ · F = ∂/∂x (x − z) + ∂/∂y (y − x) + ∂/∂z (z^2 − y)

= 1 − 0 + 2z

= 2z + 1

Now we need to find the surface integral of F over the closed surface S that bounds the region R.

We can decompose the surface S into two smooth pieces: the top surface S1, given by z = 0, and the curved surface S2, given by z = 16 − x^2 − y^2.

For the top surface S1, the unit normal vector is k, so the surface integral is:

∬S1 F · dS = ∬D F(x, y, 0) · k dA

= ∬D (x − 0)i + (y − x)j + (0^2 − y)k · k dA

= ∬D −y dA

= −∫0^4 ∫0^(2π) r sin θ dθ dr (using polar coordinates)

= 0

For the curved surface S2, we can parameterize it using cylindrical coordinates:

x = r cos θ, y = r sin θ, z = 16 − r^2

The unit normal vector is given by:

n = (∂z/∂r)i + (∂z/∂θ)j − k

= (−2r cos θ)i + (−2r sin θ)j − k

So the surface integral over S2 is:

∬S2 F · dS = ∬D F(x, y, 16 − x^2 − y^2) · ((−2r cos θ)i + (−2r sin θ)j − k) dA

= ∬D [(r cos θ − (16 − r^2))·(−2r cos θ) + (r sin θ − r cos θ)·(−2r sin θ) + (16 − r^2)^2 − (r^2 sin^2 θ − (16 − r^2))] r dr dθ

= ∬D (−16r^3 cos^2 θ − 16r^3 sin^2 θ + 16r^5 − 2r^2 sin^2 θ) r dr dθ

= ∫0^2π ∫0^4 (−16r^3) r dr dθ

= −2048π/3

Therefore, by the divergence theorem:

∬S F · dS = ∭R ∇ · F dV

= ∭R (2z + 1) dV

= ∫0^4 ∫0^(2π) ∫0^(16 − r^2) (2z + 1) r dz dθ dr

= ∫0^4 ∫0^(2π) (16r^2 + 8r) dθ dr

= 512π/3

So the left-hand side and right-hand side of the divergence theorem are equal:

∬S F · dS = ∭R ∇ · F dV

= 512π/3

Therefore, the divergence theorem is verified for the vector field F over the region R.

k³-4j+12, when k=8, j=2​

Answers

The requried when k=8 and j=2, the value of the expression k³-4j+12 is 516.

Substituting k=8 and j=2 into the expression k³-4j+12, we get:

k³-4j+12 = 8³ - 4(2) + 12

= 512 - 8 + 12

= 516

Therefore, when k=8 and j=2, the value of the expression k³-4j+12 is 516.

Learn more about simplification here:

https://brainly.com/question/2223906

#SPJ1

make the indicated trigonometric substitution in the given algebraic expression and simplify (see example 7). assume that 0 < < /2. x2 − 4 x , x = 2

Answers

The trigonometric substitution x = 2secθ simplifies the expression x^2 - 4x to (-4sin^2θ)/cosθ.

To make the indicated trigonometric substitution in the given algebraic expression and simplify, we can use the substitution x = 2secθ, where secθ = 1/cosθ.
First, we need to solve for x in terms of θ:
x = 2secθ
x = 2/(cosθ)
Now, we can substitute this expression for x in the original expression:
x^2 - 4x = (2/(cosθ))^2 - 4(2/(cosθ))
Simplifying, we get:
x^2 - 4x = 4/cos^2θ - 8/cosθ
To further simplify, we can use the identity cos^2θ = 1 - sin^2θ:
x^2 - 4x = 4/(1-sin^2θ) - 8/cosθ
We can then combine the two fractions by finding a common denominator:
x^2 - 4x = (4cosθ - 8(1-sin^2θ))/((1-sin^2θ)cosθ)
Simplifying further, we get:
x^2 - 4x = (-4sin^2θ)/cosθ
Therefore, the trigonometric substitution x = 2secθ simplifies the expression x^2 - 4x to (-4sin^2θ)/cosθ.
To know more about trigonometric visit:

https://brainly.com/question/29156330

#SPJ11

A Discrete Mathematics Professor observe the following distribution of grades for his course of 15 students: . 3 of them received A's • 4 of them received B's . 4 of them received C's • 3 of them received D's • The remaining students, if any, received F's. Assuming that each of the five letters grades is equally likely per student, what is the probability that this same distribution will occur next semester, given the same number of students? Give a nercentage result and round that to four decimal places. Your answer will be less than 1%.

Answers

The probability of getting the same grade distribution in the next semester is approximately 0.05%. Rounded to four decimal places, this is 0.0005 × 100% = 0.005%. Therefore, the probability is less than 1%.

We can use the multinomial distribution to calculate the probability of getting the same grade distribution in the next semester. The multinomial distribution gives the probability of observing a particular set of counts for each category when sampling from a population with multiple categories.

The total number of students is 15, and the number of students in each grade category is given as:

A: 3

B: 4

C: 4

D: 3

F: 1 (since there are 15 students in total, and we already accounted for 3+4+4+3=14 students)

We can use the formula for the multinomial distribution to calculate the probability of getting these counts for each category in the next semester, given that each grade is equally likely per student:

P(A=3, B=4, C=4, D=3, F=1) = (15 choose 3,4,4,3,1) × (1/5)15

where (15 choose 3,4,4,3,1) is the multinomial coefficient, which can be calculated as:

(15 choose 3,4,4,3,1) = 15! / (3! × 4! × 4! × 3! × 1!) = 315315

Substituting this value and simplifying, we get:

P(A=3, B=4, C=4, D=3, F=1) = 315315 × (1/5)15 ≈ 0.0005

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

The total number of possible grade distributions for 15 students is 5^15 (each student can receive one of five grades). The number of ways to get the same distribution as the observed one is (3 choose 3) * (4 choose 4) * (4 choose 4) * (3 choose 3) * (5 choose 1)^1 (choosing all the A's, then all the B's, etc.). This simplifies to 1.

Therefore, the probability of getting the same distribution again is 1/5^15, which is approximately 0.000000000000000004237%. Rounded to four decimal places, this is 0.0000%. So the probability is less than 1%.
To answer this question, we'll need to calculate the probability of this specific distribution occurring, given that there are 15 students and each of the five letter grades (A, B, C, D, F) is equally likely for each student.
Percentage ≈ 0.0191%

So, the probability of this same distribution occurring next semester, given the same number of students, is approximately 0.0191%.

Learn more about distribution here : brainly.com/question/31197941

#SPJ11

The triangles shown are similar. Which side of triangle PQR corresponds to side LN in triangle MNL?

a. RQ
b. PQ
c. PR
d. LM

Answers

The correct side of triangle PQR corresponds to side LN in triangle MNL is, RQ.

Since, In ΔLMN

⇒ LM = 14 ,  MN= 10  and   LN = 12

In ΔPRQ

⇒ PR =28  ,  QP = 20  and QR = 24

Hence, We get;

PR/LM = 28/14 = 2

And QP/MN = 20/10 = 2

And QR/LN = 24/12 = 2

So, ΔPRQ is similar  to Δ LMN by PPP

And, QR is corresponds to side LN in triangle MNL

So, the correct answer is the first option.

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

Quadratic Regression What is a correct regression equation if there is a quadratic relationship between Number of Employees (x) and Revenue (y)? = O (a) û = bo + b1x + b2x2 + b3x3 O (b) ŷ = bo + b^x O (c) û = bo + b1(x)2 O (d) û = bo + b1x + b2x2 =

Answers

The correct regression equation for a quadratic relationship between Number of Employees (x) and Revenue (y) is (d) û = bo + b1x + b2x2.

In a quadratic relationship, the regression equation includes both linear (b1x) and quadratic (b2x2) terms. This allows for a curved relationship between the predictor variable (Number of Employees) and the response variable (Revenue).

The linear term (b1x) captures the linear relationship between the variables, representing the change in Revenue as the Number of Employees increases or decreases. The quadratic term (b2x2) accounts for the non-linear component of the relationship, capturing the curvature and allowing for a better fit to the data.

Using this regression equation, we can estimate the expected Revenue (û) based on the given values of the Number of Employees (x) and the estimated regression coefficients (bo, b1, and b2). By fitting the data to a quadratic model, we can capture the complex relationship between the variables and make more accurate predictions.

Learn more about regression here:

https://brainly.com/question/28178214

#SPJ11

the general solution of the differential equation xdy=ydx is a family of

Answers

The general solution of the differential equation xdy=ydx is a family of curves known as logarithmic curves.


The general solution of the given differential equation xdy = ydx is a family of functions. This equation represents a first-order homogeneous differential equation. To solve it, we can rearrange the terms and integrate:

(dy/y) = (dx/x)

Integrating both sides, we get:

ln|y| = ln|x| + C

where C is the integration constant. Now, we can exponentiate both sides to eliminate the natural logarithm:

y = x * e^C

Since e^C is an arbitrary constant, we can replace it with another constant k:

y = kx

Thus, the general solution of the given differential equation is a family of linear functions with the form y = kx.

learn more about differential equation

https://brainly.com/question/31583235

#SPJ11

Cody and Earl started week 1 of their garden with 20 tomatoes. Each week they eat 10 tomatoes and sell all that
remain, but they grow 3 times as many as they sell. How many tomatoes will they have at the start of week 5?
a. 420
b. 1570
Please select the best answer from the choices provided
0 0 0
ABCD
C. 150
d. 1620
Mark this and return
Save and Exit
ext
Submit

Answers

Answer:

the answer is A.420 tomatoes

Step-by-step explanation:

at the start of week 1:20

at the start of week 2: (20-10) x 3 = 30

at the start of week 3: (30-10) x 3 = 60

at the start of week 4: (60-10) x 3 =150

at the start of week 5: (150 - 10) x 3 = 420

for the function f ( x ) = − 5 x 2 5 x − 5 , evaluate and fully simplify each of the following. f ( x h ) = f ( x h ) − f ( x ) h =

Answers

The value of the given function f(x) after simplification is given by,

f(x + h) = -5x² - 10xh - 5h² - 5x - 5h - 5

(f(x + h) - f(x)) / h = -10x - 5h - 5

Function is equal to,

f(x) = -5x² - 5x - 5:

To evaluate and simplify each of the following expressions for the function f(x) = -5x² - 5x - 5,

f(x + h),

To find f(x + h), we substitute (x + h) in place of x in the function f(x),

f(x + h) = -5(x + h)² - 5(x + h) - 5

Expanding and simplifying,

⇒f(x + h) = -5(x² + 2xh + h²) - 5x - 5h - 5

Now, we can further simplify by distributing the -5,

⇒f(x + h) = -5x² - 10xh - 5h² - 5x - 5h - 5

Now,

(f(x + h) - f(x)) / h,

To find (f(x + h) - f(x)) / h,

Substitute the expressions for f(x + h) and f(x) into the formula,

(f(x + h) - f(x)) / h

= (-5x² - 10xh - 5h² - 5x - 5h - 5 - (-5x² - 5x - 5)) / h

Simplifying,

(f(x + h) - f(x)) / h

= (-5x² - 10xh - 5h² - 5x - 5h - 5 + 5x² + 5x + 5) / h

Combining like terms,

(f(x + h) - f(x)) / h = (-10xh - 5h² - 5h) / h

Now, simplify further by factoring out an h from the numerator,

⇒(f(x + h) - f(x)) / h = h(-10x - 5h - 5) / h

Finally, canceling out the h terms,

⇒(f(x + h) - f(x)) / h = -10x - 5h - 5

Therefore , the value of the function is equal to,

f(x + h) = -5x² - 10xh - 5h² - 5x - 5h - 5

(f(x + h) - f(x)) / h = -10x - 5h - 5

learn more about function here

brainly.com/question/30008853

#SPJ4

The above question is incomplete, the complete question is:

For the function f ( x ) = -5x² - 5x - 5 , evaluate and fully simplify each of the following. f ( x + h ) = _____ and (f ( x + h ) − f ( x )) / h = ____

A pair of shoes is on a sale for 45% off the original price. The original price is $38.00. What is the sale price?

Answers

$38 x 0.45 = 17.1

38 - 17.1 = 20.9

Answer: 20.90 or letter B

Have a good day ^^

The yearbook club had a meeting. The club has 20 people, and one-fourth of the club showed up for the meeting. How many people went to the meeting?

Answers

Answer:5

Step-by-step explanation:For this problem you need to find one fourth of 20. This is done by dividing 20 by 4. The final answer will be 5

20/4 = 5

determine whether the data described are qualitative or quantitative. different types of grapes used to make wine. a. qualitative b. quantitative

Answers

The data described as "different types of grapes used to make wine" is qualitative. The correct answer is option a.

Qualitative data refers to data that cannot be measured numerically or quantified. Instead, it is defined by non-numeric characteristics such as appearance, taste, or smell.

The different types of grapes used to make wine are not measured in numerical terms and are therefore considered qualitative. These types of grapes, such as Pinot Noir, Cabernet Sauvignon, and Chardonnay, are described by their unique attributes such as their flavor, aroma, and color.

Winemakers rely on the unique characteristics of each type of grape to produce different types of wine.

To summarize, the data described is qualitative as it does not have numerical measurements, and is defined by non-numeric characteristics.

Therefore option a is correct.

Learn more about non-numeric data:

https://brainly.com/question/32091976

#SPJ11

Can someone please help me ASAP?? It’s due today!! I will give brainliest If It’s correct.

Answers

Answer:

it is the first answer because if you add them together you will get the answer.

Step-by-step explanation:

and the answer is the first one, make sure to show your work!

Show that A and B are similar by finding M so that B = M-1AM. (a) A = [1 1) and B = [4 7] (6) A=( 11 and B= (1 . and B=

Answers

A matrix is a rectangular array of numbers, symbols, or expressions arranged in rows and columns. It can be used to represent systems of linear equations, transformations in geometry, and a wide range of other mathematical concepts in a compact and organized form.

To show that A and B are similar, we need to find a matrix M such that B = M^-1AM.

(a) For A = [1 1] and B = [4 7], we can set up the equation B = M^-1AM and solve for M.

First, we can write A in its diagonal form as A = PDP^-1, where P is the matrix of eigenvectors and D is the diagonal matrix of eigenvalues.

The eigenvalues of A are λ1 = 0 and λ2 = 2, and the corresponding eigenvectors are v1 = [-1 1] and v2 = [1 1].

Therefore, we have A = PDP^-1 = [-1 1; 1 1][0 0; 0 2][-1/2 1/2; 1/2 1/2]

Next, we can substitute this into the equation B = M^-1AM to get [4 7] = M^-1[-1 1; 1 1][0 0; 0 2][-1/2 1/2; 1/2 1/2]M

Simplifying this equation, we get [4 7] = [-1/2 5/2; 5/2 1/2]M

Solving for M, we get M = [-3 -1; 5 2]

Therefore, B = M^-1AM = [-3 -1; 5 2]^-1[-1 1; 1 1][0 0; 0 2][-1/2 1/2; 1/2 1/2][-3 -1; 5 2]

= [4 7]

Hence, A and B are similar with M = [-3 -1; 5 2].

(b) For A = [1 1] and B = [1 0], we can again set up the equation B = M^-1AM and solve for M.

We can write A in its diagonal form as A = PDP^-1, where P is the matrix of eigenvectors and D is the diagonal matrix of eigenvalues.

The eigenvalues of A are λ1 = 0 and λ2 = 2, and the corresponding eigenvectors are v1 = [-1 1] and v2 = [1 1].

Therefore, we have A = PDP^-1 = [-1 1; 1 1][0 0; 0 2][-1/2 1/2; 1/2 1/2]

Next, we can substitute this into the equation B = M^-1AM to get [1 0] = M^-1[-1 1; 1 1][0 0; 0 2][-1/2 1/2; 1/2 1/2]M

Simplifying this equation, we get [1 0] = [-1/2 5/2; 5/2 1/2]M

However, we cannot solve for M because there is no matrix M that satisfies this equation.

Therefore, A and B are not similar.

To know more about matrix visit:

https://brainly.com/question/28180105

#SPJ11

If f
(
x
)
=
x
3
,
evaluate the difference quotient f
(
2
+
h
)

f
(
2
)
h
and simplify your answer.

Answers

The difference quotient is (2 + h)^3 - 2^3 / h, which simplifies to 12h + 6h^2 + h^3.

To evaluate the difference quotient, we first need to understand what it represents. The difference quotient is a mathematical expression used to approximate the derivative of a function. It measures the average rate of change of a function over a small interval.

In this case, we are given the function f(x) = x^3. We want to evaluate the difference quotient f(2 + h) - f(2) / h.

Let's substitute the values into the expression:

f(2 + h) = (2 + h)^3 = 8 + 12h + 6h^2 + h^3

f(2) = 2^3 = 8

Substituting these values into the difference quotient, we have:

(8 + 12h + 6h^2 + h^3 - 8) / h

Simplifying the numerator, we get:

12h + 6h^2 + h^3

Therefore, the simplified difference quotient is 12h + 6h^2 + h^3.

The difference quotient represents the average rate of change of the function f(x) = x^3 over a small interval of h. As h approaches 0, the difference quotient becomes closer to the instantaneous rate of change, which is the derivative of the function. In this case, the simplified difference quotient provides a polynomial expression that describes the average rate of change of f(x) over the interval (2, 2 + h).

By evaluating the difference quotient, we gain insights into how the function f(x) behaves near the point x = 2. The expression 12h + 6h^2 + h^3 represents the change in f(x) over the interval (2, 2 + h) divided by the length of the interval h. This can be useful in analyzing the behavior of the function and its rate of change in various applications of calculus, such as finding tangent lines, determining critical points, or studying optimization problems.

To learn more about difference quotient, click here: brainly.com/question/28421241

#SPJ11

An ant is at the corner of a cube of side 1 the ant moves with a constant speed 1, and can only move along the cube's edges in any direction (x,y,z) with equal probability 1/3 what is the expected time taken to reach the farthest corner of the cube

Answers

The total expected time taken for the ant to reach the farthest corner of the cube is E(Total) = √3 + E(T) = √3 + 1.

The ant has to travel along the surface diagonal of the cube to reach the farthest corner, which is a distance of √3. Since the ant moves with constant speed 1, the time taken to reach the farthest corner is simply the distance divided by the speed, i.e., t = √3/1 = √3. However, since the ant can only move along the edges of the cube and each edge has length 1, the ant has to make a series of right-angled turns to reach the farthest corner. The probability of the ant taking each of the three possible directions (x,y,z) is 1/3. Since each right-angled turn takes the ant 1 unit of time, the expected time taken to make the three turns is E(T) = 3(1/3) = 1. Therefore, the total expected time taken for the ant to reach the farthest corner of the cube is E(Total) = √3 + E(T) = √3 + 1.

Learn more about cube here

https://brainly.com/question/28776132

#SPJ11

A group of 500 middle school students were randomly selected and asked about their preferred frozen yogurt flavor. A circle graph was created from the data collected.

a circle graph titled preferred frozen yogurt flavor with five sections labeled Dutch chocolate 21.5 percent, country vanilla 28.5 percent, sweet coconut 13 percent, espresso 10 percent, and cake batter

How many middle school students preferred cake batter-flavored frozen yogurt?
27
50
72
135

Answers

Answer: 135

Step-by-step explanation:

dutch chocolate: 107.5

country vanilla: 142.5

sweet coconut: 65

espresso: 50

107.5 + 142.5 + 65 + 50 = 365

500 - 365 = 135

cake batter sounds good

Durante un periodo una mediana tasa de rentabilidad en las acciones es:
A. Menos de 2%
C. 4%
B. 3%
D. Mas del 5%

Answers

Answer:

Step-by-step explanation:

if the small gear of radius 7 inches has a torque of 225 n-in applied to it, what is the torque on the large gear of radius 21 inches?

Answers

The torque on the large gear of radius 21 inches is 674.94 n-in.

Torque = Force x Distance


In this case, we know the radius of the small gear (7 inches) and the torque applied to it (225 n-in).

We can use this information to find the force applied to the gear:

Force = Torque / Distance = 225 n-in / 7 inches = 32.14 N

Now that we know the force applied to the small gear, we can use it to find the torque on the large gear.

Since the gears mesh together, the force applied to the small gear is also applied to the large gear (assuming no energy loss due to friction or other factors).

To find the torque on the large gear, we can use the same formula:
Torque = Force x Distance = 32.14 N x 21 inches = 674.94 n-in

Therefore, the torque on the large gear of radius 21 inches is 674.94 n-in.

Know more about radius here:

https://brainly.com/question/24375372

#SPJ11

Solve the following equation for x, where 0≤x<2π. cos^2 x+4cosx=0
Select the correct answer below:
x=0
x=π/2
x=0 and π
x=π/2,3π/2,5π/2
x=π/2 and 3π/2

Answers

The correct answer for equation is x = π/2 and x = 3π/2.

Which values of x satisfy the equation[tex]cos^2(x) + 4cos(x) = 0?[/tex]

To solve the equation [tex]cos^2(x) + 4cos(x) = 0[/tex], we can factor out cos(x):

cos(x)(cos(x) + 4) = 0

Now we set each factor equal to zero and solve for x:

Setting each factor equal to zero, we find:

cos(x) = 0

x = π/2 and x = 3π/2

cos(x) + 4 = 0

cos(x) = -4 (which is not possible since the range of cosine is -1 to 1)

There are no solutions for this equation.

Therefore, the correct answer is x = π/2 and x = 3π/2. These values satisfy the original equation and fall within the given interval of 0 ≤ x < 2π.

Learn more about trigonometric equations

brainly.com/question/31653961

#SPJ11

In this exercise, we will examine how replacement policies impact miss rate. Assume a 2-way set associative cache with 4 blocks. To solve the problems in this exercise, you may find it helpful to draw a table like the one below, as demonstrated for the address sequence "0, 1, 2, 3, 4." Contents of Cache Blocks After Reference Address of Memory Block Accessed Evicted Block Hit or Miss Set o Set o Set Set 1 Miss Miss Miss Mem[O] Mem[O] Mem[0] Mem[O] Mem[4]. 21. Mem[1]. Mem[1] Mem[1] Mem[1] Miss Mem[2]. Mem[2] Mem[3] Mem[3] Miss Consider the following address sequence: 0, 2, 4, 8, 10, 12, 14, 8, 0. 4.1 - Assuming an LRU replacement policy, how many hits does this address sequence exhibit? Please show the status of the cache after each address is accessed. 4.2 - Assuming an MRU (most recently used) replacement policy, how many hits does this address sequence exhibit? Please show the status of the cache after each address is accessed.

Answers

There are 4 hits and 4 misses in the address sequence 0, 2, 4, 8, 10, 12, 14, 8, 0 using the MRU replacement policy.

How to explain the sequence

LRU replacement policy

There are 5 hits and 3 misses in the address sequence 0, 2, 4, 8, 10, 12, 14, 8, 0 using the LRU replacement policy.

The status of the cache after each address is accessed is as follows:

Address of Memory Block Accessed | Evicted Block | Hit or Miss

--------------------------------|------------|------------

0                              | N/A         | Hit

2                              | N/A         | Hit

4                              | 0           | Miss

8                              | 2           | Hit

10                             | 4           | Miss

12                             | 8           | Hit

14                             | 12          | Miss

8                              | 14          | Hit

0                              | 8           | Hit

4.2 - MRU (most recently used) replacement policy

There are 4 hits and 4 misses in the address sequence 0, 2, 4, 8, 10, 12, 14, 8, 0 using the MRU replacement policy.

The status of the cache after each address is accessed is as follows:

Address of Memory Block Accessed | Evicted Block | Hit or Miss

--------------------------------|------------|------------

0                              | N/A         | Hit

2                              | N/A         | Hit

4                              | 0           | Miss

8                              | 2           | Hit

10                             | 4           | Miss

12                             | 8           | Hit

14                             | 10          | Miss

8                              | 12          | Hit

0                              | 14          | Hit

As you can see, the LRU replacement policy results in 1 fewer miss than the MRU replacement policy. This is because the LRU policy evicts the block that has not been accessed in the longest time, while the MRU policy evicts the block that has been accessed most recently.

Learn more about sequence on

https://brainly.com/question/6561461

#SPJ1

how many numbers between 1 and 280 are relatively prime to 280?

Answers

There are [tex]$140-56-40+28+20+8-4=96$[/tex] numbers between 1 and 280 that are relatively prime to 280.

We know that [tex]$280=2^3\cdot5\cdot7$[/tex]. Thus, a number is relatively prime to 280 if and only if it is not divisible by 2, 5, or 7.

There are [tex]$\lfloor 280/2\rfloor=140$[/tex] even numbers between 1 and 280.

There are [tex]$\lfloor 280/5\rfloor=56$[/tex] multiples of 5 between 1 and 280.

There are[tex]$\lfloor 280/7\rfloor=40$[/tex] multiples of 7 between 1 and 280.

However, we have overcounted the numbers that are divisible by both 2 and 5, both 2 and 7, or both 5 and 7. To find these, we use the inclusion-exclusion principle.

There are [tex]$\lfloor 280/(2\cdot 5)\rfloor=28$[/tex] multiples of 10 between 1 and 280.

There are [tex]$\lfloor 280/(2\cdot 7)\rfloor=20$[/tex] multiples of 14 between 1 and 280.

There are [tex]$\lfloor 280/(5\cdot 7)\rfloor=8$[/tex] multiples of 35 between 1 and 280.

There are [tex]$\lfloor 280/(2\cdot 5\cdot 7)\rfloor=4$[/tex] multiples of 70 between 1 and 280.

Thus, by the inclusion-exclusion principle, there are [tex]$140-56-40+28+20+8-4=96$[/tex] numbers between 1 and 280 that are relatively prime to 280.

Learn more about prime here

https://brainly.com/question/881160

#SPJ11

the incidence rate is based upon the assumption that everyone in the candidate population have been following for a same period of time.True/False

Answers

"The given statement is True."It is crucial to ensure that the observation period is the same for all individuals in the population when calculating the incidence rate. The resulting estimate would be biased and may not accurately reflect the true incidence rate of the disease.

The incidence rate is a measure of the number of new cases of a disease or health condition that develop in a specific population during a defined time period. It is calculated by dividing the number of new cases by the total person-time at risk in the population during that time period.

To calculate the incidence rate accurately, it is essential that everyone in the candidate population has been followed for the same period of time. This assumption is necessary because the incidence rate is a rate, which means it is a measure of the occurrence of new cases over a specific period.

If some individuals are followed for a shorter or longer period than others, it would affect the incidence rate, leading to an inaccurate estimate of the disease burden in the population.

For such more questions on Population:

https://brainly.com/question/31243583

#SPJ11

True. The incidence rate is a measure of the number of new cases of a specific disease or condition that occur within a given population over a specific period of time.

The statement "the incidence rate is based upon the assumption that everyone in the candidate population has been followed for the same period" is True.

The incidence rate measures the occurrence of new cases in a population during a specific period. To calculate the incidence rate, the assumption is made that everyone in the population has been observed for the same period. This ensures that the rate accurately reflects the risk of developing the condition in the entire population.

Too accurately calculate the incidence rate, it is important to assume that everyone in the population has been followed for the same amount of time. This assumption helps to ensure that the incidence rate is a fair representation of the true number of new cases in the population.

Learn more about Number:

brainly.com/question/17429689

#SPJ11

Use calculator to find the trigonometric ratios sun 79 degrees,cos 47 degrees. And tan 77. Degrees. Round to the nearest hundredth

Answers

The trigonometric ratios of sin 79°, cos 47°, and tan 77° are 0.9816, 0.6819, and 4.1563, respectively. The trigonometric ratio refers to the ratio of two sides of a right triangle. The trigonometric ratios are sin, cos, tan, cosec, sec, and cot.

The trigonometric ratios of sin 79°, cos 47°, and tan 77° can be calculated by using trigonometric ratios Formulas as follows:

sin θ = Opposite side / Hypotenuse side

sin 79°  = 0.9816

cos θ  = Adjacent side / Hypotenuse side

cos 47° = 0.6819

tan θ =  Opposite side / Adjacent side

tan 77° = 4.1563

Therefore, the trigonometric ratios are:

Sin 79° = 0.9816

Cos 47° = 0.6819

Tan 77° = 4.1563

The ratio of two sides of a right triangle is referred to as the trigonometric ratio. There are six ratios available for each angle. Sin, cos, tan, cosec, sec, and cot are the percentages. In trigonometry, these ratios are used to provide solutions to problems involving a triangle's angles and sides. The ratio between the lengths of the sides directly opposite the angle and the hypotenuse is known as the sine of the angle.

The ratio of the neighbouring side's length to the hypotenuse's length is known as the cosine of an angle. The lengths of the adjacent and opposing sides are compared to determine the angle's tangent. The reciprocals of sine, cosine, and tangent are known as cosecant, secant, and cotangent, respectively. The trigonometric ratios of sin 79°, cos 47°, and tan 77° must be determined in this problem.

Using a calculator, we can evaluate these ratios. Rounding to the nearest hundredth, we get:

sin 79° = 0.9816, cos 47° = 0.6819, tan 77° = 4.1563

Therefore, the trigonometric ratios of sin 79°, cos 47°, and tan 77° are 0.9816, 0.6819, and 4.1563, respectively.

To know more about trigonometric ratios, visit:

brainly.com/question/30198118

#SPJ11

If the baker doubles the number of cups of batter used, b, what would you expect to happen to the number of pancakes made, p? Explain

Answers

If the baker doubles the number of cups of batter used, b, you would expect the number of pancakes made, p, to double as well.

Explanation :Doubling the cups of batter used will increase the amount of batter available for making pancakes. Since each pancake requires a specific amount of batter, doubling the amount of batter available will mean that you can make twice as many pancakes as before. Therefore, you would expect the number of pancakes made, p, to double as well.

In order to make a pancake, which is a flat cake eaten for breakfast, you pour batter into a heated pan and fry it on both sides. Many individuals enjoy drizzling maple syrup over their pancakes before eating.

Although pancakes can be savoury, in the US they are typically served as a sweet morning item. The majority of pancakes are circular in shape, made with a batter of flour, eggs, milk, and butter, and cooked on a griddle that has been buttered. Pancakes have a rich history that dates at least to ancient Greece, and they may be found in many different forms around the world.

Know more about pancakes here:

https://brainly.com/question/29336106

#SPJ11

. How many ways are there for three penguins and six puffins to stand in a line so that a) all puffins stand together? b) all penguins stand together?

Answers

a) If all puffins stand together, we can consider them as a single group. Therefore, we have four objects - this group of puffins and the three penguins - that can be arranged in 4! ways. Within the group of puffins, the six puffins can be arranged in 6! ways. Therefore, the total number of ways is 4! * 6! = 172,800.

b) Similarly, if all penguins stand together, we can consider them as a single group. Therefore, we have two groups - this group of penguins and the six puffins - that can be arranged in 2! ways. Within the group of penguins, the three penguins can be arranged in 3! ways. The six puffins can be arranged in 6! ways. Therefore, the total number of ways is 2! * 3! * 6! = 43,200.

To solve the problem, we use the concept of permutations. Permutations are arrangements of objects in a certain order. We use the formula n!/(n-r)! to find the number of permutations when we select r objects from n objects.

In part (a), we treat the group of puffins as a single object. Therefore, we have four objects in total. We can arrange them in 4! ways. Within the group of puffins, there are 6! ways to arrange the puffins themselves. Therefore, we multiply the number of arrangements of the puffins by the number of arrangements of the groups of objects to get the final answer.

In part (b), we treat the group of penguins as a single object. We have two groups of objects, which can be arranged in 2! ways. Within the group of penguins, there are 3! ways to arrange the penguins themselves. We multiply all the possibilities to get the final answer.

In conclusion, there are 172,800 ways for the three penguins and six puffins to stand in a line so that all puffins stand together, and 43,200 ways for all penguins to stand together. We used the formula for permutations to solve the problem.

To know more about permutation visit:

https://brainly.com/question/30649574

#SPJ11

1. Consider the following linear programming problem:
Min A + 2B
s.t.
A + 4B ≤ 21
2A + B ≥ 7
3A + 1.5B ≤ 21
-2A + 6B ≥ 0
A, B ≥ 0
a. Find the optimal solution using the graphical solution procedure and the value of the objective function.
b. Determine the amount of slack or surplus for each constraint.
c. Suppose the objective function is changed to max 5A + 2B. Find the optimal solution
and the value of the objective function.

Answers

a) The optimal solution is at (3, 3) with an objective function value of 9. b) The amount of slack or surplus for each constraint is Slack of 6, Surplus of 2, Slack of 7.5 and Surplus of 12. c) The optimal solution is at (6, 0) with an objective function value of 30.

a. To find the optimal solution using the graphical solution procedure, we first plot the constraints on a graph and find the feasible region.

Next, we evaluate the objective function A + 2B at each of the corner points of the feasible region:

Corner point 1: (0, 5.25) -> A + 2B = 10.5

Corner point 2: (3, 3) -> A + 2B = 9

Corner point 3: (6, 0) -> A + 2B = 12

Therefore, the optimal solution is at (3, 3) with an objective function value of 9.

b. To determine the amount of slack or surplus for each constraint, we substitute the optimal solution values of A = 3 and B = 3 into each constraint:

A + 4B ≤ 21 -> 3 + 4(3) = 15, slack = 6

2A + B ≥ 7 -> 2(3) + 3 = 9, surplus = 2

3A + 1.5B ≤ 21 -> 3(3) + 1.5(3) = 13.5, slack = 7.5

-2A + 6B ≥ 0 -> -2(3) + 6(3) = 12, surplus = 12

Therefore, the amount of slack or surplus for each constraint is:

Constraint 1: Slack of 6

Constraint 2: Surplus of 2

Constraint 3: Slack of 7.5

Constraint 4: Surplus of 12

c. To find the optimal solution and the value of the objective function when the objective function is changed to max 5A + 2B, we simply repeat the graphical solution procedure with the new objective function.

The feasible region is the same as before, and we evaluate the new objective function at each of the corner points of the feasible region:

Corner point 1: (0, 5.25) -> 5A + 2B = 10.5

Corner point 2: (3, 3) -> 5A + 2B = 19

Corner point 3: (6, 0) -> 5A + 2B = 30

Therefore, the optimal solution is at (6, 0) with an objective function value of 30.

To learn more about optimal solution here:

https://brainly.com/question/15059912

#SPJ4

A rancher wants to study two breeds of cattle to see whether or not the mean weights of the breeds are the same. Working with a random sample of each breed, he computes the following statistics .

Answers

The statistics that the rancher computed will be used to conduct a hypothesis test to determine if there is a significant difference in the mean weights of the two breeds of cattle.

To conduct the test, the rancher will need to define a null hypothesis (H0) that states that the mean weights of the two breeds are equal, and an alternative hypothesis (Ha) that states that the mean weights are different. The statistics that the rancher computed will be used to calculate the test statistic and the p-value for the hypothesis test. The test statistic will depend on the type of test being conducted (e.g., a t-test or a z-test), as well as the sample sizes and variances of the two groups. The p-value will indicate the probability of obtaining the observed test statistic, or a more extreme value, if the null hypothesis is true. If the p-value is less than a chosen significance level (such as 0.05), the rancher can reject the null hypothesis and conclude that there is a significant difference in the mean weights of the two breeds. On the other hand, if the p-value is greater than the significance level, the rancher cannot reject the null hypothesis and there is not enough evidence to conclude that the mean weights are different.

Learn more about mean weights here:

https://brainly.com/question/16170417

#SPJ11

sherry won game of scrabble again her husband and daughter he husband scored 68, points and sharry's daughter mary scored half as many point as her dad

Answers

Are you wondering how many points Sherry's daughter had? Your question is incomplete as written.

If Sherry's daughter had half as many points as her dad (who scored 68 points), then:

68/2 = 34 points. The daughter had 34 points.

A gas sample at STP contains 1.42 g oxygen and 1.84 g nitrogen. What is the volume of the gas sample?. O2:59 L O158L O 518L 0 7661

Answers

The volume of the gas sample is approximately 2.46 L. This was found by using the mole ratio of O2 and N2 to calculate the number of moles of each gas, then using the ideal gas law to calculate the volume at STP.

First, we need to calculate the number of moles of oxygen and nitrogen in the gas sample.

Moles of O2 = 1.42 g / 32 g/mol = 0.0444 mol

Moles of N2 = 1.84 g / 28 g/mol = 0.0657 mol

Since the gas sample is at STP, we can use the molar volume of a gas at STP, which is 22.4 L/mol.

The total moles of gas in the sample is

Total moles of gas = moles of O2 + moles of N2 = 0.0444 mol + 0.0657 mol = 0.1101 mol

Therefore, the volume of the gas sample is

Volume of gas = Total moles of gas x Molar volume at STP

= 0.1101 mol x 22.4 L/mol

= 2.46 L

So the volume of the gas sample is 2.46 L.

To know more about volume of gas sample:

https://brainly.com/question/23247574

#SPJ4

Other Questions
Excerpt taken from The Historic Rise of Old Hickory by Suzanne B. WilliamsFour major candidates ran in the 1824 election, all under the "Democratic-Republican" name. One of the candidates, Andrew Jackson, was already famous. In the 1780s, he earned the right to practice law and served in various offices of the state government, including senator. He earned the nickname "Old Hickory" for his toughness as a general during the War of 1812 and First Seminole War. Jackson supported slavery and "Indian removal." This earned him support from voters in southern and frontier states. The other three candidates were John Quincy Adams of Massachusetts, Henry Clay of Kentucky, and William Crawford of Georgia.U.S. presidents are elected through the Electoral College. The Founding Fathers worried that Americans were too spread out to learn enough about the candidates. Under the Electoral College, Americans cast their ballot for the popular vote, which chooses the electors for each state. The number of electoral votes each state equals the number of representatives and senators combined. The candidates must win an absolute majority of electoral votes to win the election.In 1824, Andrew Jackson won the popular vote, but he did not win it in each state. Jackson and Adams both won many electoral votes. Jackson won the most with 99. However, a candidate needs an absolute majority of electoral votes to win. In 1824, Jackson needed 131 to win. When there is not majority winner, the election goes to the House of Representatives. This has only happened twice in U.S. history.Even though he won the popular vote and many electoral votes, Andrew Jackson lost the presidency in 1824. John Quincy Adams was the Secretary of State at this time. Henry Clay was the Speaker of the House of Representatives. Henry Clay, receiving the least, was left out. However, as a leader in the House of Representatives, he had influence over the other members. Clay openly hated Jackson and there were rumors that Clay made a deal with Adams in exchange for his support. The House election declared John Quincy Adams president. Soon, he chose Henry Clay to fill the seat he left vacant, Secretary of State. Jackson was shocked and enraged. Although there was no inquiry of possible wrongdoing, Jackson accused Adams and Clay of making a "corrupt bargain."John Quincy Adams was a disappointment as president. Many of his goals created divisions like federal funds for internal improvement. Some states thought that taking federal funds would force them to follow certain rules. They felt this reduced their rights as independent states. Jackson took advantage of issues like this one to gather more support. More Jackson supporters found their way to seats in Congress. He was as a man of the people and said Adams could never understand the common mans concerns.John Quincy Adams ran against Andrew Jackson in the 1828 election. Personal attacks grew even more vicious, but Andrew Jackson appealed to many. He believed government was for the common man. He believed in strict reading of the law and limited internal improvements. He also believed in states rights.Andrew Jackson easily won the 1828 election, winning both the popular vote and a majority of electoral votes. Historians note the sectional nature of the voting. Support for Jackson was concentrated in South while Adams support was mostly in the North. Jackson was so popular because he brought changes to the government. He also wanted to make sure the government was responsible for its actions. Jackson pushed settlement into the frontier. He supported the Indian Removal act. He also defended the spread of slavery. Though his support was heavier in the South, he was determined to keep a unified nation. The rise and presidency of Old Hickory is memorable to Americans today.Which statement makes a true comparison of the 1824 and 1828 elections?A) The losers in 1824 were the main candidates for president in 1828.B) Sectional divisions were appearing in 1824 and very clear in 1828.C) Candidates were more divided on the issues in 1828 than in 1824.D) More people voted in the election of 1824 than they did in 1828. Consider the following output generated by the show interface fa0/0 command generated on a router:FastEthernet0/0 is up, line protocol is up[...]Auto-duplex, 100Mb/s, 100BaseTX/FX[...]Input queue: 0/75/1771/0 (size/max/drops/flushes); Total output drops: 0[...]5 minute input rate 0 bits/sec, 0 packet/sec5 minute output rate 0 bits/sec, 0 packet/sec15387 packets input, 1736263 bytes, 0 no bufferReceived 15241 broadcasts, 0 runts, 0 giants0 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort0 watchdog, 0 multicast0 input packets with dribble condition detected607 packets output, 6141 bytes, 0 underruns4 output errors, 10 collisions, 3 interface resets, 0 restarts0 babbles, 0 late collision, 0 deferred0 lost carrier, 0 no carrier0 output buffer failures, 0 output buffers swapped outWhich of the following statements are true about the fa0/0 interface? (Select three.)- No input or output errors have occurred.- The interface is running in half-duplex mode.- Several collisions have occurred.- One cyclic redundancy check error has occurred.- The interface is dropping incoming packets.- There have been no interface resets.- Several collisions have occurred.- One cyclic redundancy check error has occurred.- The interface is dropping incoming packets. Draw a price setting and demand curve for a situation where the buyer sets the price. Explain what it shows.Draw a price ceiling and explain what it does. Be sure to include its effects on price and quantity.List at least 5 reasons why an industry or company would want to vertically integrate. True/False: an affirmative defense is one in which the defendant denies committing the crime or claims that the prosecution lacks sufficient evidence of the defendants guilt. when an ion accelerated through a potential difference of -1880 v, its electric potential energy increases by 6.02 * x10-16 j. what is the charge on the ion? even after the appearance of the three apparitions in act iv, scene i, macbeth wants to know what? Andy is a single father who wants to purchase a home. His adjusted gross income for the year is a dollars. His monthly mortgage is m dollars, and his annual property tax bill is p dollars. His monthly credit card bill is c dollars, and he has a monthly car loan ford dollars. His quarterly homeowner's bill is h dollars. Part A Express Andy's back-end ratio as an algebraic expression. Part B The expression above is rewritten as an equivalent rational expression. Complete the numerator to this expression below. Do anyone know about demodex mites that lives in our face ? Let f(x,y,z)=11x 2y 2+5z 2. Calculate f(0,4,5). (Write your solution using the form (,,). Use symbolic notation and fractions where needed.) If the United States levies a tariff of $0.50 on every pound of coffee imported from Kenya, the United States hasA.) LEVIED A SPECIFIC TARIFF ON IMPORTED COFFEE FROM KENYAB.) LEVIED AN AD VALOREM TARIFF ON IMPORTED COFFEE FROM KENYAC.) LEVIED A TRANSIT TARIFF ON IMPORTED COFFEE FROM KENYAD.) VIOLATED ITS FREE TRADE AGREEMENT WITH KENYAE.) IMPLEMENTED A VOLUNTARY RESTRAINTS AGREEMENT (VRA) ON COFFEE IN KENYA In this assignment, you'll evaluate the implementation of a fictitious set of system calls that provide file O. These system calls allow opening, closing, reading, and writing files. One interesting aspect of this set of system calls is that the position in a file for individual read and write operations is always specified (although the natural "current position" can be specified using the anchor CURRENT POSITION-read on for more details). Another twist is that the system call for writing data into a file must prevent the string "MZ" from appearing in the first two bytes of the file. The current implementation of the system calls appears in fileio.c and fileio.h (available from Moodle) and includes // open or create a file with pathname 'name' and return a File // handle. The file is always opened with read/write access. If the // open operation fails, the global 'fserror' is set to OPEN_FAILED, // otherwise to NONE File open file (char *name); // close a 'file'. If the close operation fails, the global 'fserror' // is set to CLOSE FAILED, otherwise to NONE. void close file (File file); // read at most 'num_bytes' bytes from 'file' into the buffer 'data', // starting 'offset' bytes from the 'start' position. The starting // position is BEGINNING_OF_FILE, CURRENT_POSITION, or END_OF_FILE. If // the read operation fails, the global 'fserror' is set to // READ FAILED, otherwise to NONE unsigned long read file_from (File file, void *data, unsigned long num bytes, SeekAnchor start, long offset); Professional advisory services provide detailed information about mutual funds. Which of the followingis not a professional advisory service?A. Dun and Moody's.B. Lipper Analytical Services.C. Morningstar, Inc.D. Value Line.E. All of these are professional advisory services that provide information about mutual funds. how to gain trust back in a relationship after lying? money that we have today can be set aside to purchase things in the future. this function of money is known as Byron worked fewer than 20 days last month. Write an inequality for d, the number of days Byron worked last month. The quantum physics model of hydrogen has been accepted as correctly describing the hydrogen atom. Complete the following statement: For the ground state of the hydrogen atom, the Bohr model correctly predicts:only the energyonly the angular momentumonly the angular momentum and the spinthe angular momentum and the energythe energy, the angular momentum and the spin true/false. solar power refers to the process of harnessing the sun's power to create clean, renewable energy. a uniform meter stick swings about a pivot point which is a distance x = 23.3 cm from the end of the stick. what is its period of oscillation? Fill in the missing reactants or products to complete these fusion reactions: - He H+ +2H He + He H+H --He+ Bisection method cannot be applied for the equation x2 = 0 as the function f(x) = x2 Select one:a. is always positiveb. has a multiple rootc. has a singularityd. has a root in x = 0