if the density of a gas is 1.87 grams/liter at 34.0oc and 745 mm hg, what will be its density at 84.0oc and 721 mm hg?

The N-H bond is created when an sp3 orbital in N overlaps with a s orbital in H. The right response is number two. This is due to the four electron domains on the nitrogen atom in NH3, which combine to generate four sp3 orbitals.

The N-H bond is created when an sp3 orbital in N crosses a s orbital in H.

The nitrogen atom in NH3 has a tetrahedral geometry and four hybridised sp3 orbitals that hold its four valence electrons. The valence electron of a hydrogen atom is located in a s orbital. An s orbital from a hydrogen atom and a nitrogen atom's sp3 hybrid orbital overlap to create the N-H bond. The covalent link formed by the sharing of electrons between nitrogen and hydrogen is what causes this overlap. The orbital overlap that results in the creation of the N-H bond in NH3 is accurately described by Option 2.

learn more about nitrogen atom here:

https://brainly.com/question/2396742

#SPJ4

Absolute dating:

Zircon: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen.

Meteorites: Help to determine the age of the universe because it is assumed they were around the same time as the Earth was formed

Compression melting: Was likely formed by tectonic and volcanic events

Relative dating: When scientist are simply looking for a logical sequence of events

An igneous intrusion: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

Unconformity: When layers are missing from one area to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

Index fossils: If a fossil is determined to be a certain age, the layer it was found in is likely of the same age.

The Grand Canyon: Was likely entirely formed by a river

Iguazu Falls in Argentina: Was likely formed by glacial forces

Yosemite Valley: The lowest layer of glaciers that lubricate and allows a glacier to move

The statement "An igneous intrusion is always younger than all the layers it cuts through" is true.

The statement "Using radiometric methods to find the approximate age of a layer or fossil" is true.

learn more about Radiometric dating: https://brainly.com/question/8831242

#SPJ1

The text format of the question goes thus:

Absolute dating

Zircon

Meteorites

Compression melting

Relative dating

An igneous intrusion

Unconformity

Index fossils

The Grand Canyon

Iguazu Falls in Argentina

Yosemite Valley

Carbon 14 dating

Radiometric dating

a. was kkely formed by glacial forces

b. is always younger than all the layers it cuts through

Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.

d. If a fossil is determined to be a certain age, the layer it

was found in is likely of the same age.

e. Using radiometric methods to find the approximate age

of a layer or fossil

was likely entirely formed by a river

When layers are missing from one are to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.

h was likely formed by tectonic and volcanic events

To learn absolute date of a more recent item.

J. the lowest layer of glaciers that lubricate and allows a

glacier to move k. A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen

When scientist are simply looking for a logical sequence

of events

m. Help to determine the age of the universe because it is

assumed they were around the same time as the Earth

was formed

A scientist dilutes 50.0 ml of a pH 5.85 solution of HCl to 1.00 L. The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.

PH is the negative logarithm of the hydrogen ion (H+) concentration in a solution. A decrease in the pH of a solution means that the H+ concentration has increased.

The following formula can be used to calculate the pH of a solution:

pH = -log[H+]

The number of hydrogen ions per liter of solution is referred to as the hydrogen ion concentration [H+]. In addition, the hydroxide ion (OH-) concentration may be calculated using the following formula:

[H+] [OH-] = 1.0 × 10-14

The pH of the solution can be calculated using the equation given below:

5.85 = -log[H+]5.85 = -log[H+]H+ = 1.38 x 10-6

The number of moles of HCl in 50 mL of a 5.85 pH solution is 0.00138 mol. The number of moles of HCl after dilution to 1.00 L can be determined using the equation below:

n1V1 = n2V2

0.00138 mol x 50 ml = n2 x 1.00 LN2 = 0.0000276 mol

After dilution, the HCl concentration is 0.0000276 moles/liter. The hydroxide ion concentration [OH-] in the solution can be determined using the formula given below:

[H+] [OH-] = 1.0 × 10-140.0000276 [OH-] = 1.0 × 10-14[OH-] = 3.6 x 10-10 mol/L

The pH of the solution can be calculated using the equation given below:

pH = -log[H+]pH = -log(3.6 × 10-10)pH = 9.44

The pH of the diluted solution (Kw = 1.0 × 10-14) is approximately 1.85.

Learn more about the pH of a solution at brainly.com/question/30934747

#SPJ11

The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.

PH is the degree of acidity or alkalinity of a solution, expressed in base 10 as the negative logarithm of the H ion concentration. 

The [H3O+] and pH of a buffer that consists of 0.41 M HNO2 and 0.66 M KNO2 can be calculated using the Ka value of HNO2, which is 7.1x10^-4.

The [H3O+] is equal to the concentration of the acidic component (HNO2) times Ka, so [H3O+]= 0.41 M * 7.1x10^-4 = 2.9x10^-4 M.

The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.

Learn more about the pH of a buffer: brainly.com/question/22390063

#SPJ11

The solution that will decrease in volume when a semipermeable membrane is placed between the following solutions of 1.4% (m/v) starch and 7.62% (m/v) starch is the first one, solution A.

A semipermeable membrane is a kind of selective barrier that lets certain molecules cross while preventing others from crossing. It is a membrane that allows certain molecules or ions to pass through it by diffusion, typically by osmosis.

When a semipermeable membrane is placed between the solutions of 1.4% (m/v) starch and 7.62% (m/v) starch, solution A will decrease in volume while solution B will increase in volume.

Because the 1.4% (m/v) starch solution is less concentrated, it contains a greater amount of water, which means that it will swell when placed next to the more concentrated 7.62% (m/v) starch solution. However, due to the semipermeable membrane, only the water molecules from the 1.4% (m/v) starch solution can pass through the membrane into the more concentrated 7.62% (m/v) starch solution.

As a result, water will be transferred from solution A to solution B, causing solution A to decrease in volume while solution B to increase in volume.

Learn more about semipermeable membrane at https://brainly.com/question/737703

#SPJ11

In an isothermal expansion, option A Q> 0, AU = 0,W <0 marks the correct choice, where Q denotes the heat added, AU denotes the inertial energy change, and W is the work done.

In an isothermal expansion process of an ideal gas from state A to state B, the internal energy change (AU) is zero because the temperature remains constant. The work done (W) by the gas is negative because it loses energy in expanding against an external pressure. The heat added (Q) to the gas is positive because it absorbs energy from its surroundings to maintain its temperature constant.

While the system's temperature remains constant, isothermal expansion is a thermodynamic process that increases volume or decreases pressure. When isothermal expansion occurs in an ideal gas, T = 0, or no change in temperature, occurs. As the system performs it, the work done in an isothermal expansion is beneficial.

To know more about isothermal expansion, refer:

https://brainly.com/question/2921827

#SPJ4

Complete question is:

An ideal gas undergoes an isothermal expansion from state a to state b. In this process:

A. Q> 0, AU = 0, W <0.

B. Q> 0, AU = 0,W > 0.

C. Q=0, AU > 0,W >0.

D. Q=0, AU <0,W<0

E. Q = 0, AU = 0,W > 0

The rate of reaction of alkyl halides with triethylamine increases with the electron-releasing effect of the halide group, which increases in the order - Iodoethane < 1-bromopropane < 2-bromopropane.

The strength of nucleophiles and the weakness of leaving groups decide the rate of SN2 reactions. This is what determines the reactivity of alkyl halides.

Alkyl halides are classified as primary, secondary, or tertiary based on the number of carbons that the halogen is bonded to. Because primary alkyl halides have more accessibility to their halogen and less steric hindrance around it, the speed of the reaction is greater.

Read more about the topic of alkyl halides:

https://brainly.com/question/31034148

#SPJ11

When the initial compound formed from cyclohexanone and morpholine is mixed with methyl iodide and heated and then hydrolyzed, the product that is finally formed is N-Methylaminoethylcyclohexanone.

The reaction between cyclohexanone and morpholine in the presence of an acid catalyst produces a cyclic imine named N-morpholino-cyclohexanone, which is an intermediate in the synthesis of several drugs. It reacts with methyl iodide and potassium carbonate in methanol to form N-methylaminoethylcyclohexanone, which upon hydrolysis produces the final product, N-methylaminoethylcyclohexanone. This reaction is an example of the Mannich reaction.N-methylaminoethylcyclohexanone is a synthetic intermediate and a building block for the synthesis of various drugs. It's commonly used as an intermediate in the synthesis of sedatives and analgesics. It's also used in the synthesis of ephedrine analogs and the anticancer agent 2-[2-(4-ethoxyphenyl)ethyl]aminoethylcyclohexanone.

Learn more about hydrolysis here: https://brainly.com/question/30578484

#SPJ11

The sentence "The main form of ketones present in the blood is called acetoacetate" is True.

Acetoacetate is one of the three ketone bodies produced in the human liver. The other two ketones are beta-hydroxybutyrate and acetone.

What are ketones? Ketones are substances that are formed when the body breaks down fat for energy when glucose, which is the body's main source of energy, is scarce.

The liver synthesizes ketones from fats as a backup source of fuel when the body runs out of glucose.

A high concentration of ketones in the bloodstream is known as ketosis, and it can occur when a person is fasting, dieting, or has uncontrolled diabetes.

To know more about acetoacetate, refer here:

https://brainly.com/question/8904861#

#SPJ11

This is because limestone is a relatively soft and porous rock that is not able to withstand extreme temperatures and rapid changes in temperature that occur during calcination.

Limestone is a sedimentary rock composed mostly of calcium carbonate, which is a mineral that forms from the accumulation of skeletal remains of marine organisms such as coral and shells. It is one of the most common types of rocks on Earth and is found in a variety of colors, including white, gray, and beige.

Limestone is formed in shallow marine environments and can be found in various geological formations, including reefs, cliffs, and caves. It is often used as a building material because it is relatively easy to work with and has a natural beauty that can add to the aesthetic value of a structure. Limestone is also used in a variety of other applications, including as a raw material in the production of cement, as a soil conditioner in agriculture, and as a component in industrial processes such as steelmaking.

To learn more about Limestone visit here:

brainly.com/question/30717890

#SPJ4

The Ka of niacin can be calculated using the pH and concentration of the niacin solution as 5.9 × 10⁻⁹. Niacin is a weak acid. Thus, the correct option is A.

The acidity constant of a weak acid is known as the Ka. It is a measure of the acidity of a weak acid, which is a substance that does not completely dissociate in water. The expression for the acid dissociation of the weak acid (HA) can be given as follows:

HA ⇋ H⁺ + A⁻

Initially, the concentration of the HA in the solution is [HA]. When an acid is added to the water, the concentration of hydrogen ion [H⁺] is increased. At the same time, the concentration of the conjugate base [A⁻] increases. At equilibrium, the concentration of the three substances will be as follows:

[H⁺] = x[A⁻] = x[HA] = [HA] - x

The pH of a solution can be calculated from [H⁺] as follows:

pH = - log10 [H⁺]

The Ka is calculated using the equilibrium expression below:

Ka = [H⁺][A⁻] / [HA]

Substitute the given values into the equations.

pH = 3.26

pH = -log10 [H+]

[H+] = 6.9 × 10⁻⁴

[HA] = 0.02M

Ka = [H+][A-] / [HA]

Ka = (6.9 × 10⁻⁴)² / (0.02 - 6.9 × 10⁻⁴)

Ka = 5.9 × 10⁻⁹

Hence, the Ka of niacin is 5.9 × 10⁻⁹.

Therefore, the correct option is A.

Learn more about Niacin here:

https://brainly.com/question/28347414

#SPJ11

To change the vapor pressure to 752 mmHg, 27.8 g of sucrose (C12H22O11) must be added to 500 g of water at 100C.

Vapor pressure of a solution is affected by the presence of solutes in the solution. The relationship between vapor pressure lowering and concentration of a non-volatile solute in a solvent is described by Raoult's law.

It states that the vapor pressure of a solution is equal to the mole fraction of the solvent multiplied by the vapor pressure of the pure solvent, P₀. Hence, Pᵥ = P₀ x Xw

where, Pᵥ = vapor pressure of the solution Xw = mole fraction of the solvent P₀ = vapor pressure of the pure solvent

Therefore, P₀ - Pᵥ = P₀ x (1 - Xw)

This equation can be used to calculate the vapor pressure lowering of a solution relative to the pure solvent. By definition, the mole fraction of the solvent is given by

Xw = number of moles of solvent / total number of moles of solute and solvent.

Since we assume that the volume of the solution is 500 g of water + m g of sucrose, where m is the mass of sucrose, we can write

0.752 atm x 760 mmHg / atm = P₀ x (500 g / (500 g + m))

m= 27.8g

Therefore, we have m = 27.8 g of sucrose.

To know more about vapor pressure, refer here:

https://brainly.com/question/11864750#

#SPJ11

The coefficient that goes in front of the ECA in the chemical reaction given above is 2.

It has been indicated that coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. The unbalanced chemical equation for the given reaction is:

[tex]E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} ) ECA[/tex]

The balanced equation of the chemical reaction above is:

[tex]2E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} )_{2} ECA[/tex]

We can see that 2 comes before ECA in the balanced chemical equation above. Therefore, the coefficient that goes in front of the ECA in the chemical reaction given above is 2.

More on chemical reaction coefficient: https://brainly.com/question/31143822

#SPJ11

The partial pressure of oxygen in the atmosphere is 0.210 atm.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

The air in the atmosphere is composed of many different gases. The most common of these gases is nitrogen, which makes up 78% of the atmosphere.

Oxygen makes up 21% of the atmosphere, and the other gases make up 1%. The atmospheric pressure is the pressure created by the weight of the gases in the atmosphere.

The atmospheric pressure is measured in units of atmospheres (atm). The atmospheric pressure at sea level is usually around 1 atm, which is equal to 760 mm Hg and 101.325 torr.

This is the same pressure that you feel when you take a breath of air.

The partial pressure of a gas is the amount of pressure exerted by that gas alone, as opposed to the total atmospheric pressure. The partial pressure of oxygen in the atmosphere is 0.210 atm.

This means that, out of the total atmospheric pressure of 1 atm, 0.210 atm of the pressure is from oxygen.

Partial pressure is often measured in units of mm Hg or torr. To convert from atm to mm Hg, the value is multiplied by 760.

Therefore, the partial pressure of oxygen in mm Hg is 0.210 atm x 760 = 158.6 mm Hg and the partial pressure of oxygen in torr is 0.210 atm x 760/101.325 = 1.55 torr.

to know more about partial pressure refer here:

https://brainly.com/question/13199169#

#SPJ11

Lithium Chloride: Lithium Chloride is an ionic compound, which means that the atoms are held together by electrostatic forces.

The electrons in the outermost shell of the lithium atom are transferred to the chlorine atom, resulting in the formation of an ionic bond between the two atoms. The electrons that are transferred become part of the chlorine ion's electron cloud, giving it a negative charge.

The lithium atom now has fewer electrons than protons, giving it a positive charge and forming a Li+ ion. The chlorine atom now has more electrons than protons, giving it a negative charge and forming a Cl- ion.

Hydrogen Chloride: Hydrogen Chloride is a covalent compound, which means that the atoms are held together by sharing electrons. In the case of hydrogen chloride, the hydrogen atom shares its electron with the chlorine atom, resulting in the formation of a covalent bond between the two atoms. The shared electron is part of both the hydrogen and chlorine atom's electron clouds, forming a neutral H-Cl molecule.

Learn more about  lithium chloride  here:

https://brainly.com/question/29197367

#SPJ1

Option 3) A set of solutions with a range of precisely known analyte concentrations is used to prepare a calibration curve. The curve is generated by plotting the response (such as absorbance or peak area) of the instrument against the concentration of the analyte in the standard solutions.

The calibration curve is then used to determine the concentration of the unknown sample by comparing its response to the curve. A solvent blank is used to correct for any background signal from the solvent or other components in the sample matrix.

Calibration is the process of identifying any departure from the correct value by comparing the output of a measuring system or instrument to a standard or reference of established accuracy. Calibration's goals include ensuring the measurement system's accuracy and dependability and fixing any potential deviations.

In many different fields, including manufacturing, healthcare, and environmental monitoring, calibration is crucial. It is used to calibrate tools like spectrophotometers, pH metres, balances, and thermometers, among others. To make sure the instruments are operating within the necessary specifications, calibration procedures are normally carried out on a regular basis.

Learn more about calibration here:

https://brainly.com/question/28325954

#SPJ4

Using the bond dissociation energy approach, which entails deducting the total energy released when the bonds form in the products from the total energy released when the bonds are broken in the reactants, we may get the enthalpy change (H) for the given reaction.

The reaction's chemically balanced equation is as follows:

O2 (g) + 2H2(g) = 2H2O (g)

For the reaction, we may utilise the following bond dissociation energies (in kJ/mol):

436 kJ/mol H-H bond (reactant)

498 kJ/mol O=O bond (reactant)

463 kJ/mol H-O bond (product)

The energy needed to break the bonds in the reactants and the energy released when the bonds form in the products may both be calculated using these values::

learn more about reaction's chemically here:

https://brainly.com/question/29039149

#SPJ4

The given species and their label as strong acid, weak acid, strong base or weak base are: Strong acid: LiOH, strong base: CH₃NH₂ and Weak base: HF weak acid: HBO.

An acid is a molecule that donates hydrogen ions or protons and/or accepts electrons. When dissolved in water, it increases the concentration of H⁺ ions. Acids have a pH of less than 7.

A base is a substance that accepts hydrogen ions or protons and/or donates electrons. When dissolved in water, it increases the concentration of OH⁻ ions. Bases have a pH greater than 7.

A strong acid is an acid that is 100% ionized in water. It is highly reactive and has a low pH.

A weak acid is an acid that partially dissociates in water. It is less reactive than a strong acid and has a pH greater than 7.0.

A strong base is a base that is completely ionized in water. It has a high pH and is highly reactive.

A weak base is a base that partially dissociates in water. It is less reactive than a strong base and has a pH less than 7.0.

Learn more about Acids and bases here:

https://brainly.com/question/21974787

#SPJ11

Changing the nature of the halide, the nature of the solvent, the relative concentrations of the reactants, altering the temperature, and the nature of the nucleophile will affect the reaction rate.

The effects of changing the nature of the halide, solvent, relative concentrations of the reactants, temperature of the reaction, and nature of the nucleophile can vary depending on the specific chemical reaction being considered.

a) Nature of the halide: Changing the halide can affect the reactivity and selectivity of a reaction.

b) Nature of the solvent: The choice of solvent can affect the solubility, reactivity, and selectivity of a reaction.

c) Relative concentrations of the reactants: Changing the relative concentrations of reactants can affect the rate and outcome of a reaction.

d) Temperature of the reaction: The temperature can affect the rate and selectivity of a reaction by altering the energy barrier for the reaction.

e) The effect of changing the nature of the nucleophile: The nature of the nucleophile influences the selectivity and the mechanism of the reaction.

Learn more about Nucleophilic substitution here:

brainly.com/question/14052597

#SPJ11

(a) 1046.5 g of NO₂ is formed when NO reacts with 364 g of O₂.

(b) 682.5g of NO is required to react with 364 g of O₂.

The balanced chemical equation for the formation of nitrogen dioxide is given below:

2NO + O₂ → 2NO₂

We have been given the mass of oxygen, and we have to calculate the mass of nitrogen dioxide formed. Using stoichiometry:

Amount of NO₂ produced =2 x  Amount of O₂ used

The molecular mass of NO₂ = 46 g/mol

The molecular mass of O₂ = 32 g/mol

Number of moles of O₂ = 364 g / 32 g/mol = 11.375 mol

From the balanced chemical equation:

1 mole O₂ produces 2 moles of NO₂

So, 11.375 moles O₂ will produce 11.375 x 2 = 22.75 moles of NO₂

Amount of NO₂ produced

= Number of moles × Molecular mass

=22.75  mol × 46 g/mol= 1046.5 g

Thus, 1046.5 g of NO₂ is formed when NO reacts with 364 g of O₂.

From the balanced chemical equation:

2 moles of NO requires 1 mole of O₂ or 1 mole of O₂ needs 2 mole of NO₂

11.375 moles of O₂ will need = 11.375 x 2 = 22.75 moles of NO

Amount of NO required = Number of moles × Molecular mass= 22.75 mol × 30 g/mol= 682.5 g

Thus, 682.5g of NO is required to react with 364 g of O₂.

Therefore, 364g of O₂ will require 682.5g of NO and will produce 1046.5 g of NO₂.

To know more about NO₂, refer here:

https://brainly.com/question/6840767#

#SPJ11

The equation Q = mCT, where m is the mass of the water, C is its specific heat capacity, and T is the temperature change, We obtain Q as follows by substituting the values: (50.0 g) (4.18 J/goC) (27.1 oC - 20.5 oC) = 1393 J.

The equation Q = mCT, where m is the mass of the water, C is its specific heat capacity, and T is the temperature change, can be used to compute the energy gained by the water. Q = (17.27 g) (0.902 J/goC) (25.1 oC - 92 oC) = -2644 J, where the negative sign denotes energy loss by the metal, is obtained by substituting the numbers. According to the given reaction's heat of neutralisation, 55.8 kJ of heat are emitted for every mole of reacting HCl and NaOH. The formula n = C V, where C is the concentration and V is the volume, can be used to determine the number of moles of HCl and NaOH. With the numbers substituted, we obtain n(HCl) = (1.2n(NaOH) = (1.1 mol/L) (0.025 L) = 0.0275 mol and n(NaOH) = (1.1 mol/L) (0.025 L) = 0.03 mol, respectively. NaOH is limiting, therefore when 0.0275 mol of HCl and 0.0275 mol of NaOH combine, 55.8 kJ of heat are produced. The formula Q = n H, where n is the number of moles of the limiting reactant and H is the heat of reaction, can be used to determine the overall amount of heat emitted. We obtain Q = (0.0275 mol) (-55.8 kJ/mol) = -1.5365 kJ by substituting the variables. Q = mCT, where m is the mass of the solution, C is its specific heat capacity, and T is the change in temperature, can be used to determine how much heat the solution absorbs. When the values are substituted, we obtain Q = (50.0 g) (4.03).

learn more about mass here:

https://brainly.com/question/18064917

#SPJ4

If you started with 1.5 moles of H2 at STP, you would have approximately 33.6 liters of volume of hydrogen (H₂) gas.

To determine the number of liters of H2 you have, we need to consider the conditions under which the gas is being held (i.e. temperature and pressure), as well as the molar volume of H2 at those conditions.

At standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm (101.325 kPa), the molar volume of any ideal gas is approximately 22.4 L/mol.

Therefore, at STP, 1.5 moles of H₂ would occupy approximately:

V = n x Vm = 1.5 mol x 22.4 L/mol = 33.6 L

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

The complete question is below:

HOW MANY LITERS OF H2 DO YOU HAVE IF YOU START WITH 1.5 MOLES OF H2? (assume STP condition)

Denitrification is the process by which nitrates and nitrites in the environment are reduced to nitrogen gas ([tex]N_2[/tex]) by removing and returning bioavailable nitrogen to the atmosphere.

Denitrification is a natural process that occurs in the environment and is primarily carried out by certain types of bacteria, such as Pseudomonas, Thiobacillus, and Clostridium. During this process, the bacteria break down nitrates and nitrites into nitrogen gas using a series of oxidation-reduction reactions. The nitrates and nitrites are first converted to nitric oxide ([tex]NO[/tex]) and nitrous oxide ([tex]N_2O[/tex]) gases which are then converted to nitrogen gas, which is released into the atmosphere. This process is important in the nitrogen cycle and is essential for the removal of nitrogen from the environment.

To learn more about nitrogen click here https://brainly.com/question/2396742

#SPJ4

Answer:

The mathematical function that represents breaking bonds requiring energy in a computational model is the addition symbol (+).

Breaking a bond requires the input of energy, which means that energy is being added to the system. Therefore, the energy required to break a bond can be represented as a positive value, which is added to the total energy of the system. For example, if the energy required to break a bond is 10 joules, and the initial energy of the system is 100 joules, the total energy after the bond is broken would be 110 joules.

On the other hand, when forming bonds, energy is typically released or given off by the system. This means that the energy required for bond formation can be represented by a negative value, which would be subtracted from the total energy of the system.

Explanation:

The following statement is the correct comparison of the midpoint and equivalence point rates of change of pH as a function of volume and its consequence for the careful determination of pH:

The rate of change of pH vs. volume is greater at the equivalence point than it is at the midpoint leading to a greater uncertainty in the measurement of pH at the equivalence point than at the midpoint.

Midpoint- It is the point in the titration where half the analyte has been neutralized by the titrant. This point lies at the middle of start point and equivalence point.

Equivalence point- An equivalence point is the point at which the two reactants are present in stoichiometric amounts in a chemical reaction. During an acid-base titration, the equivalence point is reached when the number of moles of the acid equals the number of moles of the base. When an acid is titrated with a base, the solution's pH begins low and rises rapidly, indicating the formation of the conjugate base. The pH rises quickly at first and then slows as the solution approaches the equivalence point. After the equivalence point, adding more base has a much smaller effect on the pH.

Therefore, the correct answer is option B.

To learn more about "equivalence point", visit: https://brainly.com/question/2496608

#SPJ11

Precipitate production, gas evolution, heat release or absorption, a change in colour or odour, and the creation of a new material are all examples of chemical reaction evidence.

Atoms can rearrange themselves or new chemical connections can be created during a chemical reaction. One or more of the observable indicators listed below are typically present along with these changes:

Precipitate formation: A precipitate is a solid that develops from a chemical reaction in a solution. It is an obvious sign that a chemical reaction has occurred. Gas evolution: A chemical reaction can be detected by the emergence of gas bubbles, effervescence, or foaming. Heat production or absorption might indicate a chemical reaction by changing the temperature. Although an endothermic process takes in heat, an exothermic reaction releases heat. A change in colour or smell is frequently an indication of a chemical reaction. development of a brand-new substance A new substance or substances are created as a result of a chemical reaction that are chemically different from the original substance (s). Any of these symptoms will exist if a chemical reaction has taken place. However, because some reactions may be sluggish or fail to create any noticeable changes, the absence of these indicators does not always imply that a reaction has not taken place.

learn more about chemical reaction here:

https://brainly.com/question/29039149

#SPJ4

The alkyl halides ranked in order of increasing E2 reactivity are: lowest reactivity - tert-butyl bromide; intermediate reactivity - sec-butyl bromide; highest reactivity - ethyl bromide.

Tert-butyl bromide is the least reactive alkyl halide because it has the greatest steric hindrance, meaning there is less space for the nucleophile and base to interact. Sec-butyl bromide has intermediate reactivity because it has less steric hindrance than tert-butyl bromide but more than ethyl bromide. Ethyl bromide is the most reactive alkyl halide because it has the least steric hindrance and therefore the nucleophile and base can interact with ease. In summary, the order of increasing E2 reactivity is: tert-butyl bromide, sec-butyl bromide, and ethyl bromide.

For more questions on alkyl halides

https://brainly.com/question/6419720

#SPJ11

True. Ethyl chloride is produced by the gas-phase reaction of hydrochloric acid (HCl) with ethylene over a copper chloride catalyst supported on silica.

Ethyl chloride is a colorless gas that is used in a variety of chemical processes. Ethyl chloride is most commonly used as an inhalational anesthetic during surgery.

It's also utilized in the production of plastics and chemicals, as well as a solvent in some industrial processes. When exposed to sunlight or heat, ethyl chloride is combustible, and it is harmful to human health if breathed in.

Thus, the statement is true, Ethyl chloride is produced by the gas-phase reaction of hydrochloric acid (HCl) with ethylene over a copper chloride catalyst supported on silica.

Learn more about ethyl chloride here:

https://brainly.com/question/14104484

#SPJ11

Answer:

B - 4.5 L.

Explanation:

Took the test.

The empirical formula of chloroethene is C₂H₃Cl, which can be simplified to C₂H₃Cl.

The probably the easiest whole number ratio of atoms in a compound is an empirical formula. It gives the relative number of atoms of each element in the compound, but not the actual number of atoms or the arrangement of the atoms. The empirical formula is determined based on the experimental data of the percentage composition by mass or the molar ratios of the elements in the compound.

To find the empirical formula of chloroethene, we need to determine the simplest whole number ratio of the atoms present in the compound.

Let's assume we have a 100 g sample of chloroethene. Then, we can calculate the mass of each element present in the sample:

Mass of carbon (C) = 38.4 g

Mass of hydrogen (H) = 4.8 g

Mass of chlorine (Cl) = 56.8 g

Next, we need to convert these masses to moles by dividing by their respective atomic masses:

Moles of carbon (C) = 38.4 g / 12.01 g/mol = 3.196 mol

Moles of hydrogen (H) = 4.8 g / 1.01 g/mol = 4.752 mol

Moles of chlorine (Cl) = 56.8 g / 35.45 g/mol = 1.601 mol

We can then divide each of these mole values by the smallest mole value to get the simplest whole number ratio:

Carbon: 3.196 mol / 1.601 mol = 1.998 ≈ 2

Hydrogen: 4.752 mol / 1.601 mol = 2.969 ≈ 3

Chlorine: 1.601 mol / 1.601 mol = 1

To know more about empirical formula, visit:

https://brainly.com/question/14044066

#SPJ1