If the end point was surpassed and a dark orange color produced before the titration was stopped, will the molar solubility calculated be higher or lower than the actual value for calcium hydroxide? Explain

Answers

Answer 1

The molar solubility is found to be higher than the actual value.

Calcium hydroxide (Ca(OH)2) is a sparingly soluble salt, which means that it has low solubility in water. In aqueous solution, it dissociates partially into calcium ions (Ca2+) and hydroxide ions (OH-).

During a titration, a solution of known concentration (the titrant) is slowly added to the solution of the compound being titrated until the endpoint is reached. The endpoint is the point at which the reaction is complete, and it is often signaled by a color change.

In the case of calcium hydroxide, if the endpoint was surpassed and a dark orange color was produced before the titration was stopped, this indicates that the titrant has reacted with an excess of hydroxide ions.

This means that the molarity of the hydroxide ions in the solution was higher than expected, which would result in a calculated molar solubility that is higher than the actual value for calcium hydroxide. This is because the excess hydroxide ions would have come from the dissociation of more calcium hydroxide than expected, and thus the solubility of calcium hydroxide in water is higher than calculated.

Click the below link, to learn more about Calcium Hydroxide:

https://brainly.com/question/9584549

#SPJ11


Related Questions

Convert 8.3 X 1022 molecules of carbon dioxide gas to grams.

22 is an EXPONENT Above

Answers

Answer:

Read below

Explanation:

Do a quick conversion: 1 mole CO2 = 44.0095 gram using the molecular weight calculator and the molar mass of CO2. Check the chart for more details.

Consider the transport of glucose into an erythrocyte by facilitated diffusion. When the glucose concentrations are 5mM on the outside and 0.1 mM on the inside, the free-energy change for glucose uptake into the cell is: (These values may be of use to you: R= 8.315 J/mol middot K; T=298 K; 9 (Faraday constant)=96, 480 J/V; N=6.022 times 10^23/mol.)

Answers

The transport of glucose into erythrocyte by facilitated diffusion. When the glucose concentrations are 5mM on the outside and 0.1 mM on the inside, the free-energy change for glucose uptake into the cell is about 10 kJ/mol.

Given that :

Concentration of the outside = 5 mM

Concentration of the inside = 0.1 mM

Gas constant , R = 8.315 J/mol

Temperature T = 298 K

Faraday constant = 96480 J/V

N = 6.022 × 10²³ /mol

ΔV = 0.06 V

The free energy change is given as :

ΔG = RT ln (C in / C out) + ZFΔV

By using all the values , we get"

ΔG =  10 kJ/mol

Thus, the free energy change is 10 kJ/mol.

To learn more about free energy here

https://brainly.com/question/19425282

#SPJ4

Hannah is trying to figure out how tooth size is determined in two different wolves. In wolf 1, the copies of the gene are different from each other. In wolf 2, the copies of the gene are the same as each other. How does this affect how many types of proteins there are in each tooth cell?

A) Wolf 1 has one type of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

B) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

C) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has two types of protein for the tooth size feature.

D) It is impossible to say anything about proteins from the given information.

Answers

The way the copies of the gene in the wolves affects the number of types of proteins in each tooth cell is B) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

How does genes affect protein ?

The gene that determines tooth size in wolves is located on a specific chromosome, each individual has two copies of that chromosome, one inherited from each parent.

If the copies of the gene in Wolf 1 are different from each other, it means that the wolf is heterozygous for that gene, meaning it has two different versions of the gene, one inherited from each parent. This leads to the production of two different types of proteins in each tooth cell, and thus a variation of tooth size in Wolf 1.

If the copies of the gene in Wolf 2 are the same as each other, it means that the wolf is homozygous for that gene, meaning it has two identical copies of the gene inherited from the same parent.

Find out more on genes and proteins at https://brainly.com/question/3456729

#SPJ1

Arrange the steps of glycogen degradation in their proper order.

Hormonal signals trigger glycogen breakdown.

--------------------------------------------------------------
Glucose 6-phosphate undergoes further metabolic processing.

Which enzymes are required for glycogen degradation?

O phosphoglucomutase

O transferase

O glycogen phosphorylase

O phosphoglycerate mutase

O a-1,6-glucosidase

Answers

The breakdown of glycogen by the liver to maintain stable blood glucose levels requires phosphorylase kinase enzymes.

Glycogen deterioration is caused by what?

The body gets its energy primarily from glycogen. The liver houses glycogen storage. Enzymes are certain proteins that convert glycogen to glucose when the organism need extra energy. In the body, they release the glucose.

Depletion of glycogen is it beneficial?

You must avoid glycogen depletion. Due to extended periods of strenuous exercise, this occurs when the glycogen stores are depleted. you may not be eating enough carbohydrates. It will result in persistent fatigue, decreased strength, decreased endurance, and a general deterioration in athletic performance.

To know more about glycogen visit:

https://brainly.com/question/2396657

#SPJ4

How many grams does 8.92 x 1024 atoms of tin weigh?

Answers

I apologize, I made an error in my previous response. 8.92 x 1024 atoms of tin would actually weigh approximately 5.26 x 10^25 grams.

To calculate this, you can use the formula:

Weight (in grams) = Number of atoms x Atomic weight (in grams/mol)

The atomic weight of tin is 118.710 g/mol. So,

Weight (in grams) = 8.92 x 1024 atoms x 118.710 g/mol

Weight (in grams) = 1.05 x 10^26 g

Weight (in grams) ≈ 5.26 x 10^25 g

Keep in mind that this is an extremely large weight and not practically measurable as it's equivalent to 5.26 x 10^25 tons.

The boiling point of a liquid is the temperature at which the vapor pressure of the liquid is equal to the pressure on the surface of the liquid. The heat of vaporization of ethanol is 838 joules per gram.
A sample of ethanol has a mass of 65.0 grams and is boiling at 1.00 atmosphere. Calculate the minimum amount of heat required to completely vaporize this sample of ethanol.

Answers

The heat required to vaporize the ethanol is 54.47 kJ.

What heat is required to vaporize the ethanol?

We know that the heat of vaporization would have to do with the heat that is required so as to be able to change the state of the object. It is the heat that is required so as to enable the phase to be changed from liquid to gas phase.

H = mL

H = heat required

L=Heat of vaporization

m = mass of the liquid

H = 65 g * 838 joules per gram

H = 54.47 kJ

The ethanol would be vaporized by 54.47 kJ. This is the heat that is required to vaporize ethanol from the calculation above.

Learn more about heat of vaporization:https://brainly.com/question/9967928

#SPJ1

Draw the structure of acetylsalicylic acid. Circle the ester group. List two things which might be done in order to help facilitate the recrystallization of acetylsalicylic acid. What did your ferric chloride test indicate? List several common inert ingredients of aspirin.

Answers

Acetylsalicylic acid (ASA) is commonly known as Aspirin. Its structure contains a benzene ring on the left side and two functional groups, carboxylic acid and ester group linked to it.

The molecular formula of acetylsalicylic acid is C₉H₈O₄ and the expanded formula is CH₃COOC₆H₄COOH.

The crude aspirin should be dissolved in a small amount of warm ethanol to aid in the recrystallization of acetylsalicylic acid. Water will then be added, and the solution will be gradually cooled and chilled. The ASA will recrystallize, leaving the solid impurities dissolved in the solution.

The ferric chloride test detects the presence of phenol. The formation of purple color indicates a positive test result.

Several common inert ingredients of aspirin are:

Colloidal silicon dioxideCornstarchCroscarmellose sodiumHypromelloseIron oxide red Microcrystalline cellulosePolyethylene glycolPolysorbate 80Stearic acid Titanium dioxide

Learn more about recrystallization here

https://brainly.com/question/15703840

#SPJ4

Complete the chart. (Remember to enter a "0" if necessary.)
Atomic Number: 3

Answers

The electronic configuration of atomic number 3 will be, 1s²: 2s^1 with all the other slots filled in as 0.

What is electronic configuration?

The electron configuration is described as the distribution of electrons of an atom or molecule in atomic or molecular orbitals.

As we are given that the atomic number of an element is, 3. Now we have to determine the electronic configuration of an element that has the atomic number 3.

We know that the atomic number is equal to the number of protons or number of electrons.

So, the number of electrons the element has is equal to 3.

Therefore, the electronic configuration of atomic number 3 will be, 1s²: 2s^1 .

Learn more about electronic configuration at: https://brainly.com/question/26084288

#SPJ1

Complete question:

Complete the chart. (Remember to enter a 0 if necessary.) Atomic Number: 3 1s: 2s: 2p: 3s: 3p: 4s: 3d: 4p: 5s:

a log is added to a camp fire and is bured. this is an example of a change.

Answers

Answer:

Chemical Change

Explanation:

A log is added to a camp fire and is burned. This is an example of a chemical change.

Consider these chemical equations. n2(g) + 3h2(g) → 2nh3(g) c(s) + 2h2(g) → ch4(g) 4h2(g) + 2c(s) + n2(g) → 2hcn(g) + 3h2(g) which equation(s) do you need to reverse in order to calculate the overall equation for the formation of hcn and h2 from nh3 and ch4? check all that apply. a. n2(g) + 3h2(g) right arrow 2nh3(g) b. c(s) + 2h2(g) right arrow ch4(g)c. 4h2(g) + 2c(s) n2(g) right arrow 2hcn(g) + 3h2(g)

Answers

Equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

According to chemical symbolization, the definition of a chemical equation is a reaction that results in the formation of products. The creation of the consequent reaction has been caused by the inclusion of several steps in the appropriate order.

chemical formulas

The picture that is attached has the given chemical formulae.

The graphic that is included provides the anticipated final response.

Methane and ammonia served as the reactant in the subsequent reaction, which produced carbon and hydrogen.

Methane has been on the product side of equation 2 and ammonia has been on the product side of equation 1.

Thus, equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

Learn more about the chemical equations, here:

brainly.com/question/12982745

#SPJ4

Answer:

A and B,     A,  C

Explanation:

A small coil of magnesium ribbon is placed in a crucible. The crucible and cover have a mass of 21.35 grams. Measuring the mass, including the magnesium gives 21.63 grams. The crucible, cove and contents are heated and then cooled and treated with water, A second heating and measuring of the final product (magnesium combined with oxygen) gives a mass of 21.82 grams. Determine the empirical formula of this oxide of magnesium.

Answers

The empirical formula of this oxide of magnesium is derived as  MgO.

What is empirical formula?

In chemistry, empirical formula of a chemical compound is simplest whole number ratio of atoms present in compound. An example of this concept is that: empirical formula of sulfur monoxide, or SO, would be SO as the empirical formula of disulfuric dioxide, S₂O₂.

Given total mass of magnesium ribbon, crucible and cover of  21.35 grams

Given that magnesium combined with oxygen gives a mass of 21.82 grams.

As we know, mass of magnesium oxide = mass of Mg + mass of O

mass of O = 21.82 - 21.35

= 0.19

moles of O = 0.19/16

= 0.011 mol O

So, now the empirical formula of magnesium oxide is MgO.

To know more about empirical formula, refer

https://brainly.com/question/1439914

#SPJ1

In a 100.0 g a sample of a compound containing only copper and sulfur There are found to be 79.9 Of copper and 20.1 g of sulfur

Answers

A sample of a compound made up exclusively of copper and sulphur weighing 100.0 g was discovered to contain 79.9 g of copper, 20.1 g of sulphur, and 20.01 g of M(s).

What do you mean compound?

In chemistry, a compound is a substance made up of two or more different chemical elements that have been combined together in a specific ratio. When the elements interact with one another, difficult-to-break chemical bonds are formed. a substance produced chemically by combining two or more different elements. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.

What is not a compound?

A compound is a chemical entity made up of numerous identical molecules bound together by chemical bonds and made up of atoms from different elements. A molecule is not regarded as a compound if it solely contains atoms from one element.

m = mcompound * W

m(Cu) = 100 g * 0.799 = 79.0* g

M(S) = 100 g * 0.201 = 20.01 g.

To know more about Compound visit:

https://brainly.com/question/13516179

#SPJ1

According to the bohr model of the atom, the single electron of a hydrogen atom circles the nucleus...
a. in specific, allowed orbits.
b. in one fixed orbit at all times.
c. at any of an infinite number of distances, depending on its energy.
d. counterclockwise.

Answers

The protons and neutrons that make up the atom's nucleus account for the majority of the atom's mass according to the Bohr model.

What is meant by bohr model of the atom?

The Bohr model, also known as the Rutherford-Bohr model, was first proposed by Niels Bohr and Ernest Rutherford in 1913. It is a system made up of an orbiting nucleus that is compact and dense, surrounded by electrons, much like the Solar System.

Bohr was the first to realise that electrons move in various orbits around the nucleus and that the quantity of electrons in an element's outer orbit determines its properties.

In the Bohr model of the atom, the protons and neutrons that make up the nucleus are responsible for most of the atom's mass. The negatively charged electrons orbit the positively charged core, making up a small portion of the mass but being electrically comparable to the protons in the nucleus.

Therefore, the correct answer is option a. in specific, allowed orbits.

To learn more about bohr model refer to;

https://brainly.com/question/4138548

#SPJ4

How many moles of o2 are needed to react with 12 moles of c2h6?2C2H6 + 702 — 4CO2 + 6H20

Answers

21 moles of O2 are needed to react with 12 moles of C2H6.

The balanced chemical equation for the combustion of ethane (C2H6) is:

2C2H6 + 7O2 -> 4CO2 + 6H2O.

From the balanced equation, we can see that for every 2 moles of C2H6 that react, 7 moles of O2 are needed.

Since you have 12 moles of C2H6, the number of moles of O2 needed for the reaction would be:

12 moles C2H6 / 2 moles C2H6/7 moles O2 = 12 moles C2H6 / 2/7 moles O2 = 12*7/2 = 42/2 = 21 moles O2.

Therefore, 21 moles of O2 are needed to react with 12 moles of C2H6.

To learn more problems on moles:

https://brainly.com/question/14357742

#SPJ4

The image below shows two types of plant cells under a microscope.

root cells and leaf cells

Which statement explains the difference in chloroplasts between the two types of plant cells?

Answers

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy. Option A

What is the cell?

We have to note that the cell is the smallest part of an organism that can have independent existence. We know that the microscope is the device that we can be able to use to view the cells.

Now, we know that the cell is composed of the organelles of the cell. The organelles of the cell include the chloroplast of the cell as well as the cell wall of the cell.

Learn more about cell:https://brainly.com/question/30046049

#SPJ1

Missing parts;

The image below shows two types of plant cells under a microscope.

root cells and leaf cells

Which statement explains the difference in chloroplasts between the two types of plant cells?

A.

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy.

B.

Unlike the root cells, the leaf cells have many chloroplasts because leaf cells produce sugars for the plant.

C.

The root cells have smaller chloroplasts because root cells do not need to store food and water.

D.

The leaf cells have larger chloroplasts because leaf cells need more support and a stronger structure.

Arrange the liquids ethanol (C2H5OH), glycerol [HOCH2CH(OH)CH2OH], and ethylene glycol (CH2OH)2 in decreasing order of expected viscosities.

Answers

The decreasing order of viscosity of the given liquids is as glycerol, ethylene glycol, and ethanol.

Viscosity is the resistance of a fluid to change shape or flow when compared to other liquids. So the fluid with high viscosity will have low fluidity. The main reason for increased viscosity will be due to the molecular interactions . Viscosity can also be defined as the ease with which the molecules can move concerning one another. That means the more the interaction between molecules, the more viscosity.

In the case of the given liquids, all have OH groups, which could result in hydrogen bonding. So more the hydroxyl groups, the more the hydrogen bonding, the more interaction, and high the viscosity. Here glycerol has three OH groups, So it will have the highest viscosity. The ethylene glycol with two OH groups comes second and then ethanol.

So the decreasing order of viscosity will be, Glycerol, Ethylene glycol, and Ethanol.

For further information regarding Viscosity, Kindly refer

https://brainly.com/question/2193315

#SPJ4

Copper metal, Cu(s), will spontaneously reduce which of the following?

a) Fe2+ and Ag+

b) Fe2+

c) Ag+

d) Al3+

e) Fe2+ and Al3+

Answers

Cu(s), will spontaneously reduce Fe2+ and Ag+. Thus option A is the answer.

A redox (reduction-oxidation) reaction is a chemical reaction in which one species (the reducing agent) loses electrons, while another species (the oxidizing agent) gains electrons. The reducing agent is said to be reduced, while the oxidizing agent is said to be "oxidized." In this case, copper metal, Cu(s), is the reducing agent, and [tex]Fe2+[/tex] and [tex]Ag+[/tex] are the oxidizing agents.

In the redox reaction, copper metal will lose electrons and is oxidized to Cu2+. The Fe2+ and Ag+ ions will gain electrons and be reduced to Fe and Ag, respectively. This process is spontaneous because the final state of the reaction is more stable than the initial state.

The reaction can be written as:

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

In summary, copper metal is a stronger reducing agent than Fe2+ and Ag+ ions, which is why the reaction is spontaneous.

Learn more about Copper:

https://brainly.com/question/19761029

#SPJ4

PLEASE HELPPPP!!
Lab Report
Motion and Forces

Introduction-
1. What was the purpose of the experiment?

2. What were the independent, dependent, and control variables in your investigation? Describe the variables for each part of the experiment.

3. Write a hypothesis based on observations and scientific principles.

Experimental Methods-
4. What tools did you use to collect your data?

5. Write your procedure. List each step so that another student could follow the procedure and repeat your experiment.

Data and Observations-
6. Record your observations.

Conclusions-
7. What conclusions can you draw about how the sum of forces acting on an object affect its motion? Write an evidence-based claim.

8. Which mass, A, B, or C, was the greatest? Use the observations from your experiment and your knowledge of Newton’s laws of motion to write an evidence-based claim.


9. Make a model that shows the forces acting on two blocks on a flat, frictionless surface:
A 1 N block at rest
A 1 N block with 2 N of force applied in one horizontal direction
Include arrows to represent the forces and labels to indicate the magnitude of each force. Use your model to compare and explain the motion of each block.

Answers

Answer:

The purpose of this experiment was to see how motion takes place as well as Force The independent was the second item used I think that what happened at the thing I used I took a ball and threw it on the ground from height distance I recorded the time Same height

What part of the small intestine is the most important for nutrient absorption and what else occurs at this location what makes the small intestine unique?

Answers

Part of the small intestine is the most important for nutrient absorption is the jejunum and what else occurs at this location what makes the small intestine unique is it contains villi which increase the surface area to aid absorption.

The small intestine is part of the digestive tract which consists of villi, circular muscles, longitudinal muscles, mucous lining, and epithelium. In the small intestine, a chemical digestion process occurs where enzymes break down complex organic matter molecules into simpler molecules which are then absorbed by the epithelial cells.

Jejunum is part of the small intestine which is red in color because it contains lots of blood vessels and is located between the duodenum and ileum. Jejunum is the most important part of the small intestine because it absorbs most of the nutrients from food and water so that it can be used by the body. In the jejunum there are folds or projections called villi. Villi function to expand the surface of the small intestine which helps the absorption process.

Learn more about digestive system at:

https://brainly.com/question/10457697

#SPJ4

If a bond cleave next to the heteroatoms such as oxygen, sulfur and nitrogen generates a resonance stabilized cation. For instance, breaking the bond among carbon after alcohol radical generates a carbocation which is stabilized by resonance. This is named alpha cleavage and it is usually found in alcohols.

Answers

The Alpha cleavage of the alcohols is when a bond will cleave next to the heteroatoms to generates the resonance stabilization of the cation. This cleavage generally found in the alcohols.

The bond cleavage next to the heteroatoms like as oxygen, sulfur and the nitrogen will generates the cations that is resonance stabilize. The cleavage of bond in between the  carbon and the carbon that is next to atom generated the cation and it is resonance stabilized. This Alpha bond cleavage is generally found in the alcohols.

Thus, the alpha bond cleavage is breaking of the carbon - carbon bond that is adjacent to carbon attached to the functional group.

To learn more about bond cleavage here

https://brainly.com/question/16234946

#SPJ4

Based on the reading, what are the properties of carbon-14? Check all that apply.

Carbon-14 is a naturally occurring carbon isotope.
Carbon-14 has a known half-life.
Carbon-14 decays completely within 1,000 years.
Carbon-14 is not radioactive.
Carbon-14 is present in all living organisms.

Answers

To solve this we must be knowing each and every concept related to isotope. Therefore, the correct options are options A among all the given options.

What is isotope?

Every atom has an equal amount of protons and electrons, however isotopes are a little slightly weird because they contain variable quantities of neutrons while having an equal number of protons and electrons. Isotopes, however, differ in atomic mass while sharing the very same atomic number or place in the periodic table.

It is a naturally occurring (one parts per trillion) isotope.

It is radioactive, It has a half- life of 5,700 years.

It is found in all living organisms hence used for Carbon dating.

Therefore, the correct options are options A among all the given options.

To know more about isotope, here:

https://brainly.com/question/13662697

#SPJ1

Arrange the following compounds in order of decreasing boiling point. Rank from largest to smallest.

Answers

Sort the items in ascending size. Alcohol (primary>secondary>tertiary) > Amines (primary>secondary>tertiary) compounds with a lower boiling point are ALKANES in that order.

What exactly is indeed a compound element?

A compound in chemistry is a substance composed of two or more separate chemical elements mixed together in a certain proportion. When the elements are combined, they react with one another and create chemical connections that are challenging to dissolve. These bonds are formed as a result as atoms sharing or trading electrons.

How are compounds made?

Whenever a group of atoms unite to form a pure material, compounds are created. These can be reduced to their component atoms. The atoms of a reactants interact during chemical reactions to create new compounds. Reacting species are known as reactants, while the results of the reaction are known as products.

To know more about compound visit:
https://brainly.com/question/13516179

#SPJ4

The correct question is

List the following compounds in order of decreasing boiling point: Rank from largest to smallest. To rank items as equivalent, overlap them.

A solid whose molecules are arranged in a repeating pattern, is called?

Answers

Answer:

Crystalline solids

Explanation:

hope this helps

A dragster, waits for the green light and speeds to 127 m/s in 11 seconds. What is the acceleration?

Answers

Answer: it would be x=7.5 m/s because you put x= 60-0 over 8 and i think dvide

Zinc Sulfide reacts with oxygen according to the reaction:
2ZnS (s) + 3 O2(g) -> 2 ZnO (s) + 2 SO2 (g)

A reaction mixture contains 4.2 moles of zinc sulfide and 6.8 moles of oxygen. Once the reaction occurred as completely as possible, what amount in moles is left of the excess reactant?

Answers

The amount in moles of the excess reactant left is 0.5 mole.

Balanced equation- 2ZnS (s) + 3O₂(g) --> 2ZnO (s) + 2SO₂(g).

What is another name for zinc sulfide?

A typical pigment known as sachtolith is zinc sulphide.

From the balanced equation,

2 moles of ZnS reacted with 3 moles of O₂

How to determine the excess reactant

From the balanced equation,

2 moles of ZnS reacted with 3 moles of O₂

Therefore,

4.2 moles of ZnS will react with =(4.2 × 3) / 2 = 6.3 moles of O₂

From the calculations made above, we can see that only 6.3 moles of O₂ out of 6.8 moles given, is required to react completely with 4.2 moles of ZnS.

Thus, ZnS is the limiting reactant and O₂ is the excess reactant.

How to determine the mole of the excess reactant remaining

The excess reactant is O₂. Thus the mole remaining after the reaction can be obtained as illustrated below:

Mole of O₂ given = 6.8 moles

Mole of O₂ that reacted = 6.3 moles

Mole of O₂ remaining =?

Mole of O₂ remaining = (Mole of O₂ given) - (Mole of O₂ that reacted)

Mole of O₂ remaining = 6.8 - 6.3

Mole of O₂ remaining = 0.5 mole

To learn more about reactant refer to:

https://brainly.com/question/25685654

#SPJ1

In an experiment involving a balloon, a scientist notices that the gas particles within the balloon begin to move faster, resulting
in the balloon expanding. Which statement best describes the experiment? (1 point)
O The scientist is investigating Boyle's law, which shows that pressure and volume are directly proportional.
O The scientist is investigating Charles's law, which shows that temperature and volume are directly proportional.
O The scientist is investigating Boyle's law, which shows that pressure and volume are inversely proportional.
O The scientist is investigating Charles's law, which shows that temperature and volume are inversely proportional.

Answers

The statement which describes the experiment best is,the scientist is investigating Charles's law, which shows that temperature and volume are directly proportional.

What is Charles's law?

It states that the volume of a given mass of gas is directly proportional to its absolute temperature when pressure is held constant. It states that the volume of a given mass of gas is directly proportional to its absolute temperature when pressure is held constant. In other words, if the temperature of a gas increases, its volume will also increase. This relationship was first described by French scientist Jacques Charles in 1787. He based his law on the results of experiments he conducted with varying amounts of gas. Charles's Law is one of the gas laws, which were used to formulate the ideal gas law. This law is especially useful for understanding how gases behave under various conditions, such as changes in temperature and pressure. It is also important to note that Charles's Law does not apply to liquids and solids as they are not gases.

To learn more about Charles's law

https://brainly.com/question/14842720

#SPJ1

This immense range began to form between 40 and 50 million years ago when two large landmasses India and Eurasia driven by plate movement interacted

Answers

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided is referred to as Himalaya and is therefore denoted as option B.

What is a Mountain?

This is referred to as an elevated portion of the Earth's crust, generally with steep sides that show significant exposed bedrock.

The pressure of the impinging plates from the immense mountain ranges when India and Eurasia collided and was relieved by thrusting skyward, formed what is known as the Himalaya mountains which is why option B was chosen as the correct choice.

Read more about Himalaya here https://brainly.com/question/536493

#SPJ1

The full question is:

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided. Because both these continental landmasses have about the same density, one plate could not be subducted under the other. The pressure of the impinging plates could only be relieved by thrusting skyward, and forming the _______________ Mountains.

A) Eurasian

B) Himalaya

C) Rocky

D) Ural

What is the molar mass of AI(CIO4)3?

Answers

Answer:

Molar mass is 325.33

Explanation:

Molar mass is 325.33

how many moles of copper are 4.57 x 10^15 atoms of copper?

Answers

There will be  7.58*10^-9 moles of copper atoms in 4.57*10^15 atoms of copper.

what is meant by 1 mole?

A substance's mole is equivalent to 6.022 x 1023 of that material (such as atoms, molecules, or ions). The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 1023. To convert between mass and the number of particles, use the mole concept.

What is the short definition of Avogadro's number?

Avogadro's number, which is equal to 6.02214076 1023, is the number of units in one mole of any material (defined as its molecular weight in grams). Depending on the substance and the nature of the reaction, the units may be electrons, atoms, ions, or molecules.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

When 2 moles of ammonia ([tex]NH_{3}[/tex]) decomposes into nitrogen gas ([tex]N_{2}[/tex]) and hydrogen gas ([tex]H_{2}[/tex]), how many moles of nitrogen gas are produced?


- 1 mole

- 2 moles

- 3 moles

- 4 moles


When 2 moles of ammonia ([tex]NH_{3}[/tex]) decomposes into nitrogen gas ([tex]N_{2}[/tex]) and hydrogen gas ([tex]H_{2}[/tex]), how many hydrogen gas are produced?

- 1 mole

- 2 moles

- 3 moles

- 4 moles

Answers

Two moles of ammonia result in one mole of nitrogen and three moles of hydrogen. This process is endothermic.

How many moles of ammonia can you make from 2 moles of nitrogen gas?When we combine two moles of nitrogen with six moles of hydrogen, we get two moles of ammonia.Nitrogen gas and hydrogen gas are produced during the decomposition of ammonia. Two moles of ammonia result in one mole of nitrogen and three moles of hydrogen. This process is endothermic.It takes 6 moles of "H (2)" to produce 4 moles of ammonia, which is equal to "3/cancel(2) xx cancel(4(2))".There are three hydrogen atoms in a mole of NH3. Therefore, there are 6 hydrogen atoms in two moles.

To learn more about ammonia refer to:

https://brainly.com/question/14445062

#SPJ1

Other Questions
More starbucks? achieve 3000 What is this article mainly about? A. Starbucks coffee company will soon be offering a new option to customerspaying for their coffee using their cell phones.B. Starbucks coffee company is adding access to ESPN and Marvel Digital Comics to its Wi-Fi network.C. Starbucks coffee company has several new ideas designed to keep the company growing and earning money. D. Starbucks coffee company became popular in 1971 when it opened a coffeehouse caf in Seattle, Washington draw the product obtained when trans-3-octene is treated first with br2 in ch2cl2, second with nanh2 in nh3, and then finally with h2/lindlar's catalyst. TRUE/FALSE. Advertisers only have to pay when they actually receive a click K's whole life insurance policy lapsed two months ago due to nonpayment. She would now like to reinstate the policy. All of these statements are correct about the policy's reinstatement EXCEPT As Shelly gets older, she is better able to work productively with people she doesn't like or ... This ability is most central to ______ intelligence. .1)When performing Present Worth Analysis on alternatives with different lifespans, one method is to use the Least Common Multiple of the alternatives. If Option A had a lifespan of 6 years, and Option B had a life span of 4 years, the LCM would be2)Present worth and annual worth may be considered relative measures, whereas ROR is an absolute measure. True or False? there are 6 workers in this process each task is done by 1 worker, what is the flow time of this process if this process works at half of its maximum capacity the relationship between slave-trading and the general development of trade within africa was. a) the slave trade inevitably detracted from the development of other forms of trade. b) unknown to present historians, though the slave trade detracted from economic development overall. c) the slave trade inevitably stimulated the development of other forms of trade. d) the population increases that resulted from the slave trade probably stimulated trade. In a typical boys' peer group during middle childhood, which norm is not likely to be valued?A. collaborationB. dominanceC. self-relianceD. the hiding of vulnerability You have just been appointed as the County Commissioner of Hazard County. Your first day on the job you have the followingconversations:Ludwig mentions that Frank, the local rancher, is inflating land prices by buying too much land.This is an example of _______.(a negative externalitya pecuniary externalitya positive externalitynot an externality) a new government is elected and announces that once it is inaugurated, it will increase the money supply. use the dd-aa model to study the economys response to this announcement Sodium hypochlorite (NaOCI) is the active ingredient in laundry bleach. Typically, bleach contains 5.0% of this salt by mass, which is a 0.67 M solution. Determine the concentrations of all species and compute the pH of laundry bleach. T/F. Data flow anomalies are generally detected by dynamic techniques. what was the first television series to show a married couple sleeping in the same bed? a struct is a definition, not a declaration. (1) a. true b. false Indicate whether each of the following is a source of cash, use of cash, or has no cash impact. a. Firm issues new long-term debt. b. Firm prepays operating costs. c. Because the firm buys another firm it amortizes goodwill. d. Firm sells outdated computer equipment. e. Firm pays a stock dividend. f. Firm sells its product on credit. g. Firm buys a new fleet of trucks. Which of the following are factor pairs for 12? Write the function findFirst(). The function has two parameters: a const char * s1 pointing to the first character in a C-style string, and a const char * s2. Return a pointer to the first appearance of s2 appearing inside s1 and nullptr (0) if s2 does not appear inside s.** You may not use ANY library functionsor include any headers, except for for size_t. and for testing. Describe a method to determine how many degrees would be in 'one turn' of any regular polygon? Let A be an n x n square matrix with exactly three distinct eigenvalues and the dimension of each of its eigenspaces is 2 or less. Given that A is diagonalizable, find the value ofn(A) 3 < n < 6 (B) n < 3 (C) n > 6 ( D) There is not enough information to estimate the value of n .