if the wind speed at 60 meters is 8 m/s, what is the wind speed at 80 meters? use the industry standard of 1/7 for the shear exponent. (round two decimal places)

Answers

Answer 1

Thus, the wind speed at 80 meters is approximately 8.74 m/s when the wind speed at 60 meters is 8 m/s and the shear exponent is 1/7.

In order to find the wind speed at 80 meters, we need to use the shear exponent. The industry standard for the shear exponent is 1/7, which means that the wind speed will decrease by a factor of 1/7 for every meter increase in height.

To calculate the wind speed at 80 meters, we can use the following formula:

Wind speed at 80m = Wind speed at 60m * (80/60)^(1/7)

Plugging in the given values, we get:

Wind speed at 80m = 8 * (80/60)^(1/7)
Wind speed at 80m = 8 * 1.092
Wind speed at 80m = 8.74 m/s

Therefore, the wind speed at 80 meters is approximately 8.74 m/s when the wind speed at 60 meters is 8 m/s and the shear exponent is 1/7.

It's important to note that the shear exponent can vary depending on the atmospheric conditions, terrain, and other factors. So, this calculation provides an estimate based on the given standard.

Know ore about the exponent

https://brainly.com/question/13669161

#SPJ11


Related Questions

what is the upper sum for f(x)=17−x2 on [3,4] using four subintervals?

Answers

the upper sum for f(x) = 17 - [tex]x^{2}[/tex] on the interval [3, 4] using four subintervals is approximately 6.46875.

To calculate the upper sum, we divide the interval [3, 4] into four subintervals of equal width. The width of each subinterval is (4 - 3) / 4 = 1/4.

Next, we evaluate the function at the right endpoint of each subinterval and multiply it by the width of the subinterval. For this function, we need to find the maximum value within each subinterval. Since the function f(x) = 17 - [tex]x^{2}[/tex] is a downward-opening parabola, the maximum value within each subinterval occurs at the left endpoint.

Using four subintervals, the right endpoints are: 3 + (1/4), 3 + (2/4), 3 + (3/4), and 3 + (4/4), which are 3.25, 3.5, 3.75, and 4 respectively.

Evaluating the function at these right endpoints, we get: f(3.25) = 8.5625, f(3.5) = 10.75, f(3.75) = 13.5625, and f(4) = 13.

Finally, we calculate the upper sum by summing the products of each function value and the subinterval width: (1/4) × (8.5625 + 10.75 + 13.5625 + 13) = 6.46875.

Learn more about subinterval here:

https://brainly.com/question/27258724

#SPJ11

A segment that connects two points on a circle is called a
A. circumference
B. chord
C. radius
D. diameter

Answers

A segment that connects two points on a circle is called a chord, which makes the option B correct.

What is a chord in circles

In the context of circles, a chord refers to a line segment that connects two points on the circumference of the circle. It can also be defined as the longest possible segment that can be drawn between two points on a circle. Every chord in a circle creates two arcs, one on each side of the chord.

Note that diameter is a special type of chord that passes through the center of the circle. It is the longest possible chord in a circle, and it divides the circle into two congruent semicircles.

Therefore, a segment that connects two points on a circle is called a chord.

Read more about chord here:https://brainly.com/question/17023621

#SPJ1

8. Max is remodeling his house and is trying to come up with dimensions for his
bedroom. The length of the room will be 5 feet longer than his bed, and the
width of his room will be 7 feet longer than his bed. The area of his bed and the
room together is given by the function:
A(x) = (x + 5) (x + 7)
Part A: Find the standard form of the function A(x) and the y-intercept. Interpret
the y-intercept in the context.
Standard Form: A(x)
y- intercept:
Interpret the y-intercept:
=

Answers

The y-intercept represents the area of the bed and room together when the length and width of the bed are both zero and the function is given by the relation A(x) = x² + 12x + 35

Given data ,

To find the standard form of the function A(x), we first expand the expression:

A(x) = (x + 5) (x + 7)

A(x) = x² + 7x + 5x + 35

A(x) = x² + 12x + 35

So the standard form of the function A(x) is:

A(x) = x² + 12x + 35

To find the y-intercept, we set x = 0 in the function:

A(0) = 0² + 12(0) + 35

A(0) = 35

So the y-intercept is 35. In the context of the problem, the y-intercept represents the area of the bed and room together when the length and width of the bed are both zero.

Hence , the function is solved

To learn more about function rule click :

https://brainly.com/question/3760195

#SPJ1

List three different ways to write 511 as the product of two powers. Explain why all three of your expressions are equal to 511.

Answers

Three different ways to write [tex]5^{11}[/tex] as the product of two powers are:

[tex]5^{1} * 5^{10} \\\\5^{5} * 5^{6} \\\\5^{3} * 5^{8}[/tex]

How to write the powers in different ways

To write the powers in different ways that all translate to 5 raised to the power of 11, we need to first recall that the product of the same bases is gotten by summing up the bases.

In this case, 1 times 10 is 1 plus 10 which is 11. The same applies for 5 and 6 and 3 and 8. So, the above are three ways to rewrite the expression.

Learn more about the power of products here:

https://brainly.com/question/28782029

#SPJ1

calculate the fundamental vector product: r(u,v)=2ucos(v)i 2usin(v)j 2k

Answers

Step-by-step explanation:

the answer is 2k(2ucos)2usin(vi)

Which numbers round to 4.9 when rounded to the nearest tenth? Mark all that apply.
A 4.95
B 4.87
C 4.93
D 5.04
E 4.97

Answers

Answer:

B, C

Step-by-step explanation:

A would round up to 5

B would round up to 4.9

C would round down to 4.9

D would round down to 5

E would round up to 5

Out of all these only B and C round to 4.9

Answer:

B and C

Step-by-step explanation:

A 4.95  --- this would round to 5.00.

B 4.87 - - - this would round to 4.9

C 4.93 - - - this would round to 4.9

D 5.04 - - - - this would round to 5.0

E 4.97 - - - this would round to 5.0

Let f and g be functions such that, f(0)=2, g(0)=3, f'(0)=-10, g'(0)=-3. Find h'(0) for the function h(x)=g(x)f(x). h'(0)=??

Answers

If f and g be functions such that, f(0)=2, g(0)=3, f'(0)=-10, g'(0)=-3, then :

h'(0) = -36.

To find h'(0), we can use the product rule for derivatives. The product rule states that if h(x) = f(x)g(x), then h'(x) = f'(x)g(x) + f(x)g'(x).

Applying this to our function h(x) = g(x)f(x), we get:

h'(x) = g'(x)f(x) + g(x)f'(x)

Now we can evaluate this expression at x = 0, since we are looking for h'(0). Plugging in the given values, we get:

h'(0) = g'(0)f(0) + g(0)f'(0)
      = (-3)(2) + (3)(-10)
      = -6 - 30
      = -36

Therefore, we can state that the value of h'(0) = -36.

To learn more about derivatives visit : https://brainly.com/question/28376218

#SPJ11

5.2 in
7 in
9 in
4.7 in

Answers

There is no question :(

A) A researcher believes that a particular study exhibits large sampling error. What does the researcher mean by sampling error? B) How can sampling error be diminished? C) Discuss why one of the following methods of sample selection might yield sampling error: convenience, snowball, or judgmental.

Answers

Sampling error refers to the discrepancy between sample characteristics and population characteristics. It can be diminished by increasing the sample size, using random sampling techniques, and improving response rates.

A) Sampling error refers to the difference between the characteristics of a sample and the characteristics of the population from which it was drawn.

In other words, sampling error refers to the degree to which the sample statistics deviate from the population parameters.

B) Sampling error can be diminished by increasing the sample size, using random sampling techniques to ensure that the sample is representative of the population, and minimizing sources of bias in the sampling process.

C) Convenience sampling, snowball sampling, and judgmental sampling are all methods of non-probability sampling, which means that they do not involve random selection of participants.

As a result, these methods are more likely to yield sampling error than probability sampling methods.

Convenience sampling involves selecting participants who are readily available, which may not be representative of the population of interest.

Snowball sampling involves using referrals from existing participants, which may create biases in the sample.

Judgmental sampling involves selecting participants based on the researcher's judgment of who is most relevant to the study, which may not be representative of the population of interest.

To know more about method of sample selection refer here :

https://brainly.com/question/15604044#

#SPJ11

find the taylor polynomial 2() for the function ()=63 at =0.

Answers

The second-degree Taylor polynomial for the function ()=63 at =0 is simply 63.

To find the Taylor polynomial 2() for the function ()=63 at =0, we need to use the formula for the nth-degree Taylor polynomial:
2() = f(0) + f'(0)() + (1/2!)f''(0)()^2 + (1/3!)f'''(0)()^3 + ... + (1/n!)f^(n)(0)()^n

Since we are only interested in the second-degree Taylor polynomial, we need to calculate f(0), f'(0), and f''(0):
f(0) = 63
f'(x) = 0 (the derivative of a constant function is always 0)
f''(x) = 0 (the second derivative of a constant function is always 0)

Substituting these values into the formula, we get:
2() = 63 + 0() + (1/2!)0()^2
2() = 63

Therefore, the second-degree Taylor polynomial for the function ()=63 at =0 is simply 63.

Know more about the Taylor polynomial here:

https://brainly.com/question/2533683

#SPJ11

P is a function that gives the cost, in dollars, of mailing a letter from the United States to Mexico in 2018 based on the weight of the letter in ounces,w

Answers

Given that P is a function that gives the cost, in dollars, of mailing a letter from the United States to Mexico in 2018 based on the weight of the letter in ounces, w.In order to write a function, we must find the rate at which the cost changes with respect to the weight of the letter in ounces.

Let C be the cost of mailing a letter from the United States to Mexico in 2018 based on the weight of the letter in ounces, w.Let's assume that the cost C is directly proportional to the weight of the letter in ounces, w.Let k be the constant of proportionality, then we have C = kwwhere k is a constant of proportionality.Now, if the cost of mailing a letter with weight 2 ounces is $1.50, we can find k as follows:1.50 = k(2)⇒ k = 1.5/2= 0.75 Hence, the cost C of mailing a letter from the United States to Mexico in 2018 based on the weight of the letter in ounces, w is given by:C = 0.75w dollars. Answer: C = 0.75w

To know more about weight,visit:

https://brainly.com/question/31659519

#SPJ11

How many more bushels did mr myers pick of golden delicious apples than of red delicious apples

Answers

The amount of golden delicious apples than red delicious apples that Mr. Myers picked would be 14 1/8.

How many more apples did Mr. Myers pick?

The extra amount of golden delicious apples that Mr. Myers picked in comparison to the red delicious apples that Mr. Myers picked would be gotten by subtracting the amount of golden delicious apples from red delicious apples as follows:

27 2/8 - 13 1/8

= 14 1/8

So, the amount with which the number of golden delicious apples that Mr. Myers got was greater than the red delicious apples is 14 1/8

Learn more about fractions here:

https://brainly.com/question/17220365

#SPJ4

Complete Question:

Mr.Myers picked 13 1/8 bushels of red delicious apples and 27 2/8 bushels of golden delicious apples. How many bushels of golden delicious apples than of red delicious apples did he pick?

determine and from the given parameters of the population and sample size. u=83. =14, n=49

Answers

The population mean, denoted by u, is 83, and the standard deviation of the population, denoted by sigma, is 14. The sample size, denoted by n, is 49.
Hi! I'd be happy to help you with your question. Based on the given parameters of the population and sample size, we need to determine µ (mean) and σ (standard deviation).

From the information provided, we have the following parameters:

1. Population mean (µ) = 83
2. Population standard deviation (σ) = 14
3. Sample size (n) = 49

Using these parameters, we can determine the mean and standard deviation for the sample. Since the population mean is given, the sample mean will also be 83.

To find the standard error (SE), which is the standard deviation for the sample, use the formula:

SE = σ / √n

Plugging in the values, we get:

SE = 14 / √49
SE = 14 / 7
SE = 2

So, the sample mean (µ) is 83, and the sample standard deviation (SE) is 2.

To know more about mean visit:

https://brainly.com/question/1136789

#SPJ11

In a recent election Corrine Brown received 13,696 more votes than Bill Randall. If the total numb


Corrine Brown received


votes.

Answers

The number of votes for each candidate would be:

Corrine Brown = 66,617

Bill Randall = 52,920

How to determine the number of votes

To determine the number of votes for each candidate, we will make some equations with the values given.

Equation 1 = CB + BR = 119,537

(BR + 13,696) + BR = 119,537

2BR + 13,696 = 119,537

Collect like terms

2BR = 119,537 - 13,696

2BR = 105841

Divide both sides by 2

BR = 52,920

This means that Corrine Brown received 52,920 +  13,696 =  66,617

Learn more about simultaneous equations here:

https://brainly.com/question/148035

#SPJ4

Complete Question:

In a recent election corrine brown received 13,696 more votes than bill Randall. If the total number of votes was 119,537, find the number of votes for each candidate

use direct integration to determine the mass moment of inertia of the homogeneous solid of revolution of mass m about the x- and y-axes. ans: ixx = (2/7)mr 2 , iyy = (1/7)mr 2 (2/3)mh2

Answers

the mass moment of inertia about the x-axis is ixx = (2/7)[tex]mr^{2}[/tex] and about the y-axis is iyy = (1/7)[tex]mr^{2}[/tex] + (2/3)[tex]mh^{2}[/tex]

To find the mass moment of inertia, we consider the solid of revolution as a collection of infinitesimally thin disks or cylinders stacked together along the axis of revolution. Each disk or cylinder has a mass element dm.

For the mass moment of inertia about the x-axis (ixx), we integrate the contribution of each mass element along the axis of revolution:

ixx = ∫ [tex]r^{2}[/tex] dm

Since the solid is homogeneous, dm = ρ dV, where ρ is the density and dV is the volume element. For a solid of revolution, dV = πr^2 dh, where h is the height of the solid.

Substituting the expressions and performing the integration, we get:

ixx = ∫ [tex]r^{2}[/tex] ρπr^2 dh

= ρπ ∫ [tex]r^{4}[/tex] dh

= [tex](1/5)\beta \pi r^{4}[/tex] h

Since the solid is homogeneous, the mass m = [tex]\beta \pi r^{2}[/tex] h. Substituting this in the equation above, we get:

ixx = (1/5)m [tex]r^{2}[/tex]

Similarly, for the mass moment of inertia about the y-axis (iyy), we integrate along the radius r:

iyy = ∫[tex]r^{2}[/tex]  dm

= ∫ [tex]r^{2}[/tex] [tex]\beta \pi r^{2}[/tex] dh

= ρπ ∫ [tex]r^{4}[/tex] dh

= (1/5)[tex]\beta \pi r^{4}[/tex] h

Since the height of the solid is h, substituting [tex]\beta \pi r^{2}[/tex] h = m, we get:

iyy = (1/5)m [tex]r^{2}[/tex] + [tex](2/3)mh^{2}[/tex]

learn more about integration here:

https://brainly.com/question/31744185

#SPJ11

An object moves on a trajectory given by r(t)-(10 cos 2t, 10 sin 2t) for 0 t ?. How far does it travel?

Answers

Thus, the object travels a distance of 10π units along the given trajectory.

To find out how far an object travels along a given trajectory, we need to calculate the arc length of the curve. The formula for arc length is given by:

L = ∫_a^b √[dx/dt]^2 + [dy/dt]^2 dt

where L is the arc length, a and b are the start and end points of the curve, and dx/dt and dy/dt are the derivatives of x and y with respect to time t.

In this case, we have the trajectory r(t) = (10 cos 2t, 10 sin 2t) for 0 ≤ t ≤ π/2. Therefore, we can calculate the derivatives of x and y as follows:

dx/dt = -20 sin 2t
dy/dt = 20 cos 2t

Substituting these values into the formula for arc length, we get:

L = ∫_0^(π/2) √[(-20 sin 2t)^2 + (20 cos 2t)^2] dt
 = ∫_0^(π/2) √400 dt
 = ∫_0^(π/2) 20 dt
 = 20t |_0^(π/2)
 = 10π

Therefore, the object travels a distance of 10π units along the given trajectory.

Know more about the trajectory

https://brainly.com/question/88554

#SPJ11

find the first three nonzero terms in the taylor polynomial approximation to the de y″ 9y 9y3=6cos(4t) , y(0)=0,y′(0)=1.

Answers

The first three nonzero terms in the Taylor polynomial approximation to $y(t)$ are $t + \frac{1}{3}t^2 + O(t^3)$.

Using these initial conditions, we can write the first few terms of the Taylor polynomial approximation as:

\begin{align*}

y(t) &\approx y(0) + y'(0)t + \frac{y''(0)}{2!}t^2 \

&= t + \frac{1}{2}y''(0)t^2 \

&= t + \frac{1}{2}\left(\frac{6\cos(0)}{9\cdot 0 + 9}\right)t^2 \

&= t + \frac{1}{3}t^2

\end{align*}

Therefore, the first three nonzero terms in the Taylor polynomial approximation to $y(t)$ are $t + \frac{1}{3}t^2 + O(t^3)$.

To know more about Taylor polynomial  refer here:

https://brainly.com/question/31419648

#SPJ11

The singular points of the differential equation xy''+y'+y(x+2)/(x-4)=0 are Select the correct answer. 0 none 0, -2 0, -2, 4 0, 4

Answers

The singular point(s) of the differential equation are x = 4.

To find the singular points of the differential equation xy'' + y' + y(x + 2)/(x - 4) = 0, we need to find the values of x at which the coefficient of y'' or y' becomes infinite or undefined, since these are the points where the equation may behave differently.

The coefficient of y'' is x, which is never zero or undefined, so there are no singular points due to this term.

The coefficient of y' is 1, which is also never zero or undefined, so there are no singular points due to this term.

The coefficient of y is (x + 2)/(x - 4), which becomes infinite or undefined when x = 4, so 4 is a singular point of the differential equation.

Therefore, the singular point(s) of the differential equation are x = 4.

Note that this analysis does not consider any initial or boundary conditions, which may affect the behavior of the solution near the singular point(s).

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

Calculate the area of the following parallelogram: parallelogram with a 4 inch side, a 10 inch side, and 3 inches tall 26 in2 30 in2 40 in2 28 in2

Answers

The area of the parallelogram is 21 in².

What is area?

Area is the region bounded by a plan shape.

To calculate the area of the parallelogram, we use the formula below

Formula:

A = h(a+b)/2...................... Equation 1

Where:

A = Area of the parallelogramh = Height of the parallelograma, b = The two parallel sides of the parallelogram

From the question,

Given:

h = 3 incha = 4 inchb = 10 inch

Substitute these values into equation 1

A = 3(4+10)/2A = 3(14)/2A = 21 in²

Learn more about area here: https://brainly.com/question/28470545

#SPJ1

Which of the following statements about decision analysis is false? a decision situation can be expressed as either a payoff table or a decision tree diagram there is a rollback technique used in decision tree analysis ::: opportunity loss is the difference between what the decision maker's profit for an act is and what the profit could have been had the decision been made Decisions can never be made without the benefit of knowledge gained from sampling

Answers

The statement "Decisions can never be made without the benefit of knowledge gained from sampling" is false.

Sampling refers to the process of selecting a subset of data from a larger population to make inferences about that population. While sampling can be useful in some decision-making contexts, it is not always necessary or appropriate.

In many decision-making situations, there may not be a well-defined population to sample from. For example, a business owner may need to decide whether to invest in a new product line based on market research and other available information, without necessarily having a representative sample of potential customers.

In other cases, the costs and logistics of sampling may make it impractical or impossible.

Additionally, some decision-making approaches, such as decision tree analysis, rely on modeling hypothetical scenarios and their potential outcomes without explicitly sampling from real-world data. While sampling can be a valuable tool in decision-making, it is not a requirement and decisions can still be made without it.

Learn more about Decision trees:

brainly.com/question/28906787

#SPJ11

find a value of c> 1 so that the average value of f(x)=(9pi/x^2)cos(pi/x) on the interval [2, 20]

Answers

c = pi/2, and the value of c > 1 such that the average value of f(x) on the interval [2, 20] is equal to c is c = pi/2.

The average value of a function f(x) on the interval [a, b] is given by:

Avg = 1/(b-a) * ∫[a, b] f(x) dx

We want to find a value of c > 1 such that the average value of the function [tex]f(x) = (9pi/x^2)cos(pi/x)[/tex] on the interval [2, 20] is equal to c.

First, we find the integral of f(x) on the interval [2, 20]:

[tex]∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

We can use u-substitution with u = pi/x, which gives us:

-9pi * ∫[pi/20, pi/2] cos(u) du

Evaluating this integral gives us:

[tex]-9pi * sin(u) |_pi/20^pi/2 = 9pi[/tex]

Therefore, the average value of f(x) on the interval [2, 20] is:

[tex]Avg = 1/(20-2) * ∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

= 1/18 * 9pi

= pi/2

Now we set c = pi/2 and solve for x:

Avg = c

[tex]pi/2 = 1/(20-2) * ∫[2, 20] (9pi/x^2)cos(pi/x) dx[/tex]

pi/2 = 1/18 * 9pi

pi/2 = pi/2

Therefore, c = pi/2, and the value of c > 1 such that the average value of f(x) on the interval [2, 20] is equal to c is c = pi/2.

To know more about function refer to-

https://brainly.com/question/12431044

#SPJ11

18. Ten apples, four of which are rotten, are in a refrigerator. Three apples are randomly selected without replacement. Let the random variable x represent the number chosen that are rotten. Construct a table describing the probability distribution, then find the mean and standard deviation for the random variable x. (Hint: you can use Table A-1 to find the probabilities)

Answers

The standard deviation of x can be  0.725.

The table describing the probability distribution of x is as follows

x P(X=x)

0 10/120

1 48/120

2 42/120

3 20/120

To find the probabilities, we can use the hypergeometric distribution formula:

P(X=x) = (C(4,x) * C(6,3-x)) / C(10,3)

where C(n,r) represents the number of combinations of n things taken r at a time.

The mean of x can be found using the formula:

E(X) = Σ(x * P(X=x))

= 0*(10/120) + 1*(48/120) + 2*(42/120) + 3*(20/120)

= 1.4

Know more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

write dissociation reactions for the following ionic compounds (example: bai2(s) ba2 (aq) 2 i−(aq) ): a) kcl(s) b) cabr2(s) c) fe2(so4)3(s)

Answers

Potassium chloride (KCl) is a binary ionic compound consisting of potassium cations (K+) and chloride anions (Cl-).  a) KCl(s) → K+(aq) + Cl-(aq). b) CaBr2(s) → Ca2+(aq) + 2Br-(aq). c) Fe2(SO4)3(s) → 2Fe3+(aq) + 3SO42-(aq).

a) KCl(s) → K+(aq) + Cl-(aq)

Potassium chloride (KCl) is a binary ionic compound consisting of potassium cations (K+) and chloride anions (Cl-). When KCl is dissolved in water, it dissociates into its constituent ions, i.e., K+ and Cl-. This process is represented by the above chemical equation.

b) CaBr2(s) → Ca2+(aq) + 2Br-(aq)

Calcium bromide (CaBr2) is also a binary ionic compound consisting of calcium cations (Ca2+) and bromide anions (Br-). When CaBr2 is dissolved in water, it dissociates into its constituent ions, i.e., Ca2+ and 2Br-. This process is represented by the above chemical equation.

c) Fe2(SO4)3(s) → 2Fe3+(aq) + 3SO42-(aq)

Iron(III) sulfate (Fe2(SO4)3) is a complex ionic compound consisting of two iron cations (Fe3+) and three sulfate anions (SO42-). When Fe2(SO4)3 is dissolved in water, it dissociates into its constituent ions, i.e., 2Fe3+ and 3SO42-. This process is represented by the above chemical equation.

Learn more about Potassium chloride here

https://brainly.com/question/25380525

#SPJ11

find a cubic function that has a local maximum value of 4 at 1 and a local minimum value of –1,184 at 7.

Answers

The cubic function that has a local maximum value of 4 at 1 and a local minimum value of –1,184 at 7 is:

[tex]f(x) = (-28/15)x^3 + (59/15)x^2 - 23x - 149/3[/tex]

We can start by writing the cubic function in the general form:

[tex]f(x) = ax^3 + bx^2 + cx + d[/tex]

To find the coefficients of the function, we can use the given information about the local maximum and minimum values.

First, we know that the function has a local maximum value of 4 at x = 1. This means that the derivative of the function is equal to zero at x = 1, and the second derivative is negative at that point. So, we have:

f'(1) = 0

f''(1) < 0

Taking the derivative of the function, we get:

[tex]f'(x) = 3ax^2 + 2bx + c[/tex]

Since f'(1) = 0, we have:

3a + 2b + c = 0 (Equation 1)

Taking the second derivative of the function, we get:

f''(x) = 6ax + 2b

Since f''(1) < 0, we have:

6a + 2b < 0 (Equation 2)

Next, we know that the function has a local minimum value of -1,184 at x = 7. This means that the derivative of the function is equal to zero at x = 7, and the second derivative is positive at that point. So, we have:

f'(7) = 0

f''(7) > 0

Using the same process as before, we can get two more equations:

21a + 14b + c = 0 (Equation 3)

42a + 2b > 0 (Equation 4)

Now we have four equations (Equations 1-4) with four unknowns (a, b, c, d), which we can solve simultaneously to get the values of the coefficients.

To solve the equations, we can eliminate c and d by subtracting Equation 3 from Equation 1 and Equation 4 from Equation 2. This gives us:

a = -28/15

b = 59/15

Substituting these values into Equation 1, we can solve for c:

c = -23

Finally, we can substitute all the values into the general form of the function to get:

[tex]f(x) = (-28/15)x^3 + (59/15)x^2 - 23x + d[/tex]

To find the value of d, we can use the fact that the function has a local maximum value of 4 at x = 1. Substituting x = 1 and y = 4 into the function, we get:

4 = (-28/15) + (59/15) - 23 + d

Solving for d, we get:

d = -149/3

To know more about cubic function refer here:

https://brainly.com/question/29337275

#SPJ11

Lincoln invested $2,800 in an account paying an interest rate of 5 3/8 % compounded continuously. Lily invested $2,800 in an account paying an interest rate of 5 7/8 % compounded quarterly. After 15 years, how much more money would Lily have in her


account than Lincoln, to the nearest dollar?

Answers

Given, Lincoln invested $2,800 in an account paying an interest rate of 5 3/8 % compounded continuously. Lily invested $2,800 in an account paying an interest rate of 5 7/8 % compounded quarterly.

After 15 years, we need to calculate how much more money would Lily have in her account than Lincoln, to the nearest dollar. Calculation of Lincoln's investment Continuous compounding formula is A = Pe^rt Where, A is the amount after time t, P is the principal amount, r is the annual interest rate, and e is the base of the natural logarithm.

Lincoln invested $2,800 in an account paying an interest rate of 5 3/8 % compounded continuously .i.e. r = 5.375% = 0.05375 and P = $2,800Thus, A = Pe^rtA = $2,800 e^(0.05375 × 15)A = $2,800 e^0.80625A = $2,800 × 2.24088A = $6,292.44Step 2: Calculation of Lily's investmentThe formula to calculate the amount in an account with quarterly compounding is A = P (1 + r/n)^(nt)Where, A is the amount after time t, P is the principal amount, r is the annual interest rate, n is the number of times the interest is compounded per year, and t is the time. Lily invested $2,800 in an account paying an interest rate of 5 7/8 % compounded quarterly.i.e. r = 5.875% = 0.05875, n = 4, P = $2,800Thus, A = P (1 + r/n)^(nt)A = $2,800 (1 + 0.05875/4)^(4 × 15)A = $2,800 (1.0146875)^60A = $2,800 × 1.96494A = $7,425.16Step 3: Calculation of the difference in the amount After 15 years, Lily has $7,425.16 and Lincoln has $6,292.44Thus, the difference in the amount would be $7,425.16 - $6,292.44 = $1,132.72Therefore, the amount of money that Lily would have in her account than Lincoln, to the nearest dollar, is $1,133.

Know more about investment Continuous compounding  here:

https://brainly.com/question/31444739

#SPJ11

Consider a city X where the probability that it will rain on any given day is 1%. You have a weather prediction algorithm that predicts the weather at the start of each day and obeys two rules: a. Before a rainy day, it'll predict rain with probability 90% b. Before a dry (no rain) day, it'll predict rain with probability 1%. Find the probability that 1. The probability that it won't rain given that your algorithm predicted a rainy day. 0.01 X 0.01 2. The probability that it will rain given that your algorithm predicted a dry day. 0.1 X 0.1

Answers

The probability that it won't rain given that your algorithm predicted a rainy day is approximately 9.1%. The probability that it will rain given that your algorithm predicted a dry day is approximately 0.01%.

What are the probabilities of no rain after a rainy prediction and rain after a dry prediction?

When the algorithm predicts rain, it has a 90% accuracy rate, meaning that it correctly predicts rain 90% of the time. However, since the overall probability of rain in city X is only 1%, most of the algorithm's rainy predictions will be false positives. Using conditional probability, we can calculate the probability of no rain given a rainy prediction as follows: (0.01 * 0.1) / (0.01 * 0.1 + 0.99 * 0.9) ≈ 0.0091 or 9.1%.

Conversely, when the algorithm predicts a dry day, it has a 99% accuracy rate, meaning that it correctly predicts no rain 99% of the time. Since the overall probability of rain is 1%, the algorithm's dry predictions will mostly be true negatives. Using conditional probability again, we can calculate the probability of rain given a dry prediction as follows: (0.99 * 0.01) / (0.99 * 0.01 + 0.01 * 0.9) ≈ 0.0001 or 0.01%.

Learn more about probability  

brainly.com/question/31828911

#SPJ11

Becoming a fine artist can happen overnight.


True


False

Answers

trueeeee but like very unlikely

Answer:

Step-by-step explanation:

True. But there is a very high chance of not happening

Use an ordinary truth table to answer the following problems. Construct the truth table as per the instructions in the textbook. Given the argument: K ⊃ Q / Q ⊃ ∼ K // K ≡ Q This argument is:

Answers

The given argument "K ⊃ Q / Q ⊃ ∼ K // K ≡ Q" is valid.

Is the argument "K ⊃ Q / Q ⊃ ∼ K // K ≡ Q" valid?

To determine the validity of the argument "K ⊃ Q / Q ⊃ ∼ K // K ≡ Q," we construct an ordinary truth table. The argument consists of two premises and a conclusion. The symbol "⊃" represents the conditional implication, "∼" represents negation, and "≡" represents equivalence.

We assign truth values (T or F) to the atomic propositions K and Q and evaluate the truth values of the premises and the conclusion based on the given argument. By systematically filling out the truth table, we can examine all possible combinations of truth values for K and Q.

After constructing the truth table, we observe that in every row where the premises K ⊃ Q and Q ⊃ ∼ K are true, the conclusion K ≡ Q is also true. Therefore, the argument is valid.

Learn more about argument

brainly.com/question/2645376

#SPJ11

!!HELPP PLEASE 30 POINTSSS!!

this for financial mathematics, thank you for your help!

Answers

2) a. The average daily balance for the billing period, which ends on June 11. May has 31 days is $547.56.

b. $0.71 is the finance charge calculated on June 11. The monthly periodic rate is 1.3%.

c.  $548.27 is the Smith's new credit card balance on June 12.

3) $83.50 money was saved by making the payment earlier in the billing cycle.

a. It does matter when you make your payment because the finance charge is based on the balance at the end of the billing period.

b.  It also matters when you make your purchases because the daily balance is calculated based on the charges and payments up to and including each day.

2)

a. To find the average daily balance, we need to first calculate the balance for each day of the billing period. The balance for each day is the sum of charges and payments up to and including that day. We can calculate the balances as follows:

May 12: $378.50

May 13: $378.50 + $129.79 = $508.29

May 14-31: $508.29

June 1: $508.29 + $135.85 = $644.14

June 2-7: $644.14

June 8: $644.14 + $37.63 = $681.77

June 9: $681.77 - $50.00 = $631.77

June 10-11: $631.77

Next, we add up the daily balances and divide by the number of days in the billing period:

Average daily balance = (31 x $508.29 + 6 x $644.14 + 2 x $681.77) / 39

                                      = $21,328.99 / 39

                                      = $547.56

b. To calculate the finance charge, we first need to calculate the daily periodic rate, which is the monthly periodic rate divided by the number of days in a month:

Daily periodic rate = 1.3% / 30

                              = 0.04333%

Next, we multiply the average daily balance by the daily periodic rate and by the number of days in the billing period:

Finance charge = $547.56 x 0.0004333 x 30

                          = $0.71

c. The Smith's new credit card balance on June 12 is the sum of the average daily balance and the finance charge:

New balance = $547.56 + $0.71

                       = $548.27

3) The payment was made on June 9, which is 3 days before the end of the billing period. If the payment had been made on June 11, the balance would have been $631.77 instead of $548.27. This means that the payment saved the Smiths $83.50 in finance charges.

a) It does matter when you make your payment because the finance charge is based on the balance at the end of the billing period. If you make a payment earlier in the billing cycle, your balance will be lower at the end of the period and you will pay less in finance charges.

b) It also matters when you make your purchases because the daily balance is calculated based on the charges and payments up to and including each day. If you make a large purchase early in the billing cycle, your average daily balance will be higher and you will pay more in finance charges.

Learn more about Billing cycle at

brainly.com/question/29348756

#SPJ1

The length of life, in hours, of a drill bit in a mechanical operation has a Weibull distribution with a = 2 and B = 50. Find the probability that the bit will fail before 10 hours of usage. The probability is approximately: O 1 O 0 O 0.5 O 0.8

Answers

The probability that the bit will fail before 10 hours of usage is:

P(X < 10) = F(10) = 1 - e^(-(10/50)^2) ≈ 0.3935

The Weibull distribution is given by the probability density function:

f(x) = (a/B) * (x/B)^(a-1) * e^(-(x/B)^a)

where a and B are the shape and scale parameters, respectively.

In this case, a = 2 and B = 50. We want to find the probability that the bit will fail before 10 hours of usage, i.e., P(X < 10), where X is the random variable representing the length of life of the drill bit.

Using the cumulative distribution function (CDF) of the Weibull distribution, we have:

F(x) = 1 - e^(-(x/B)^a)

Substituting the values of a and B, we get:

F(x) = 1 - e^(-(x/50)^2)

So the answer is approximately 0.4.

Know more about probability here;

https://brainly.com/question/30034780

#SPJ11

Other Questions
What are the impacts of that process of productionon the environment, on society andon individuals? True or false: when investors purchase shares of stock from a corporation, it is recorded by the corporation as investments in securities.A. TrueB. False Need help with this one As you were holding your cousin's baby, you notice that her eyelids tremble because her eyes were darting underneath her eyelids. The baby is most likely experiencing ________ sleep. Can someone please answer 1. Revisit Figure 24.43. What elements and principles of art can you identify in this work? Do you feel that this is a successful work of art? Why or why not?2. How did Sonia Sheridan use software to manipulate video?3. List the differences and similarities between draw and paint programs. Jane lost her job and had difficulty finding a new one. A large factory in her town also closed, and 3000 people were suddenly without work. The relationship between jane's personal experience and the issue facing society is called: How does head to tail rule helps us to find the resultant of forces ?? Explain with the help of a diagram. Effect of Correlated Decay on Fault-Tolerant Quantum Computation Select the correct text in the passage.Which two sentences in theexcerpt suggest that Policles loved quality music?The Contestby Arthur Conan Doyle (adapted excerpt)The blue-clad player struck several chords uponhis lyre, and then burst suddenly out into the "Ode of Niobe," and Policies sat straight up on hisbench and gazed at the stage in amazement. The tune demanded a rapid transition from a low note to a high, and had been purposely chosenfor this reason. The lownote was a grunting, a rumble, the deep discordant growling of an ill-conditioned dog. Then suddenly the singer threwup his face, straightened his figure, rose upon his tiptoes, and withwagging head and scarlet cheeks emitted a howl. All the while the lyretwanged and thrummed, sometimes in front of and sometimes behind the voice of the singer. But what amazed Policles most of all was theeffect of this performance upon the audience. Every Greek was a trained critic, and as unsparing in his hisses as he was lavish in his applause.Many a singer far better than this absurd fop had been driven from the platform, but now, as the man stopped and wiped the abundant sweatfrom his face, the whole assembly burst into a delirium of appreciation. The shepherd held his hands to his bursting head and felt that hisreason must be leaving him, for it was surely a dreadful musical nightmare, and he would wake soon and laugh at the remembrance. But no, thefigures were real, the faces were those of his neighbours, andthe theatre of Olympia. The whole chorus was in full blast,the cheers which resounded in his ears were indeed from an audience which filledthe hummers humming, the shouters bellowing, the tappers hard at work upon thebenches, while every now and then came a musical cyclone of "Incomparable! Divine!" from the trained phalanx who intoned their applause,their united voices sweeping over the tumult as the drone of the wind dominates the roar of the sea. It was madness-insufferable madness!this were allowed to pass, there was an end of all musical justice in Greece. Policles' conscience would not permit himIfhis bench with waving hands and up-raised voice, he protested withCO be still. Standing uponall the strength of his lungs against the mad judgment of the audience. Who would most likely do the best job of playing a game in which the goal was to list as many novel ways to use a banana as possible A(n) __________ is an executive grant releasing the individual from punishment or legal consequences of a crime before or after conviction; it restores all rights and privileges of citizenship. A lead weight falls from a height of 6 m onto a muddy surface. It comes to rest after penetrating 0.4 cm into the surface. What was the magnitude of the average acceleration during the impact? How long did it take to stop?(Also can I have like a little explanation :)) You know that spreadsheets work well for processing and analyzing a small dataset, like the one youre using. to get the data from the database into a spreadsheet, what should you do? What are two reasons why Communism was seen as such a threat to a America in the 1950s?the possession of nuclear weapons by RussiaFrance leaning toward becoming a Communist statem perceived infiltration of Communists in governmentCanada becoming a Socialistic nation after the war On Monday, Cinthia studied for 3 1/2 hours. On Tuesday, she studies 2/3 of her study time on Monday. How many hours did Cinthia study on Tuesday? People should ask the advice of others before move to other cities.moving contains funds you have in your bank checking account as travelers' checks and the currency in circulation in the economy. In an adaptive or change - driven project life cycle: Group of answer choices the waterfall approach is commonly used. the product is well understood. early results lead into planning later work. all planning precedes all executing. please help me with this questio A pension fund manager is considering three mutual funds. The first is a stock fund, the second is a long-term government and corporate bond fund, and the third is a T-bill money market fund that yields a sure rate of 5.5%. The probability distributions of the risky funds are:Suppose now that your portfolio must yield an expected return of 12% and be efficient, that is, on the best feasible CAL.