If two objects are pushed by the same amount of force, the one with the greater mass will move more slowly. For a science project, Kendra used centimeter cubes, each with the same mass and volume, to build the two rectangular prisms shown. If each rectangular prism is pushed by the same amount of force, which one will move more slowly? Compare the volumes using
> or <?
​

The total amount of money Carol originally invested is £22,000 in the bank account.

Compound interest is interest that is calculated not only on the initial amount of money invested or borrowed, but also on any accumulated interest from previous periods.

This results in exponential growth or accumulation of interest over time.

Let X be the amount that Carol originally invested in the account.

After 1 year, the amount of money in the account will be X(1+0.025) = X(1.025).

After Carol withdrew £1000, the amount of money in the account will be X(1.025) - £1000.

After 2 years (i.e. on 1st January 2016), the amount of money in the account will be (X(1.025) - £1000)(1+0.025) = (X(1.025) - £1000)(1.025).

We know that the amount of money in the account on 1st January 2016 was £23,517.60, so we can write the equation:

(X(1.025) - £1000)(1.025) = £23,517.60

Expanding the left-hand side and simplifying, we get:

X(1.025)² - £1000(1.025) = £23,517.60

X(1.025)² = £24,567.63

Dividing both sides by (1.025)², we get:

X = £22,000 (rounded to the nearest pound)

To know more about invested visit:

https://brainly.com/question/8557811

#SPJ1

The complete question is -

On the 1st of January 2014, Carol invested some money in a bank account. The account pays 2.5% compound interest per year. On the 1st of January 2015, Carol withdrew £1000 from the account. On the 1st of January 2016, she had £23 517.60 in the account. Work out how much Carol originally invested in the account?

Answer:

Step-by-step explanation:

For Diane's account:

Year 1: Interest = $70,000 x 0.03 = $2,100

Year 2: Interest = ($70,000 + $2,100) x 0.03 = $2,163

Year 3: Interest = ($70,000 + $2,100 + $2,163) x 0.03 = $2,227.89

For Henry's account:

Year 1: Interest = $70,000 x 0.03 = $2,100

Year 2: Interest = $70,000 x 0.03 = $2,100

Year 3: Interest = $70,000 x 0.03 = $2,100

For the first year, both Diane and Henry earn the same interest of $2,100. However, for the second and third years, Diane earns more interest than Henry. Therefore, Diane earns more interest for each year after the first year

Answer:

B. $6 per part

Step-by-step explanation:

The average cost per part can be computed as follows

Average Cost = (324-300)/(104-100)

= 24/4

=$6

Answer: B. $6 per part

The given matrices are in the following form,

Reduced echelon form is Matrix A .

Only echelon form is Matrix B.

Neither echelon form nor reduced echelon form is Matrix C.

Matrix A is in reduced echelon form.

In matrix A,

Each row has a leading entry of 1

That is farther to the right than the leading entry of the row above it.

Additionally, all entries below a leading 1 are 0.

This meets the requirements for a matrix to be in reduced echelon form.

Matrix B is in echelon form only.

In matrix B,

Each row has a leading entry

That is farther to the right than the leading entry of the row above it.

However, not all entries below a leading entry are 0.

In the third row, there is a leading 1.

But the entries below it are not all 0.

Matrix is in echelon form only, but not in reduced echelon form.

Matrix C is in neither echelon form nor reduced echelon form.

In matrix C,

The first and third rows have leading entries.

But the second row does not.

In the first row, the leading 1 is not farther to the right than the leading entry of the row below it.

This matrix does not meet the requirements for echelon form or reduced echelon form.

learn more about matrix here

brainly.com/question/30326090

#SPJ4

Therefore, if the recipe requires 4 cups of stock for one batch of soup, he will need 8 cups of stock to double the recipe.

Ratio is a mathematical term used to compare two or more quantities of the same kind. It is a way of expressing the relationship between two numbers or values. Ratios are usually expressed in the form of a:b, where a and b are the two quantities being compared.

by the question.

Let's assume that the recipe for one batch of soup requires 4 cups of stock. If Mr. West wants to make:

1 batch of soup: he would need 4 cups of stock.

2 batches of soup: he would need 8 cups of stock (4 cups x 2 batches).

3 batches of soup: he would need 12 cups of stock (4 cups x 3 batches).

Therefore, the ratio of cups of stock to batches of soup would be:

1 batch of soup requires 4 cups of stock.

2 batches of soup require 8 cups of stock, so the ratio would be 8 cups of stock per 2 batches of soup, or 4 cups of stock per batch of soup.

3 batches of soup require 12 cups of stock, so the ratio would be 12 cups of stock per 3 batches of soup, or 4 cups of stock per batch of soup.

To double the recipe, Mr. West would need to use twice the amount of each ingredient, including the stock.

To learn more about ratio:

https://brainly.com/question/13419413

#SPJ1

For the given function, the critical point is (-1,2), relative extrema is is 2, and saddle points is zero.

To find the critical points of a function, we need to find where the partial derivatives of the function are equal to zero or do not exist. In other words, we need to find the points where the function is not changing with respect to x and y. The partial derivative of f(x,y) with respect to x is:

fx = 2x + 2

And the partial derivative of f(x,y) with respect to y is:

fy = 2y - 4

To find the critical points, we set both partial derivatives to zero and solve for x and y:

fx = 2x + 2 = 0

=> x = -1

fy = 2y - 4 = 0

=> y = 2

So, the critical point of the function is (-1, 2).

To determine whether this critical point is a relative maximum, minimum, or saddle point, we need to look at the second partial derivatives of the function. The second partial derivative of f(x,y) with respect to x is:

fx = 2

And the second partial derivative of f(x,y) with respect to y is:

fy = 2

The mixed partial derivative of f(x,y) with respect to x and y is:

fy = 0

To classify the critical point, we can use the second derivative test.

If fx and fy are both positive (or both negative) at the critical point, then the critical point is a relative minimum (or maximum), respectively.

If fx and fy have different signs, then the critical point is a saddle point. If the second derivative test is inconclusive, then we need to use additional methods to determine the nature of the critical point.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Complete Question:

Find the critical points, relative extrema, and saddle points of the function. (If an answer does not exist, enter DNE.) f(x, y) = x² + y² + 2x - 4y + 2

The cοst οf painting the triangle bοrder at the given rate is Rs. [tex]108\sqrt{(2)[/tex].

A triangle is a geοmetric shape that cοnsists οf three line segments, οr sides, that are cοnnected tο fοrm three angles.

Tο find the cοst οf painting the triangle bοrder, we first need tο find its area. Let's call the third side οf the triangle "x".

We knοw that the perimeter οf the triangle is 24cm, sο we can write an equatiοn:

6cm + 8cm + x = 24cm

Simplifying this, we get:

x = 10cm

Nοw we can use Herοn's fοrmula tο find the area οf the triangle:

s = (6cm + 8cm + 10cm)/2 = 12cm

Area [tex]= \sqrt{(s(s-6cm)(s-8cm)(s-10cm))[/tex]

[tex]= \sqrt{(12cm6cm4cm*2cm)[/tex]

[tex]= 2\sqrt{(72cm^2)[/tex]

[tex]= 12\sqrt{(2) cm^2[/tex]

Finally, we can calculate the cοst οf painting the bοrder at a rate οf Rs. 9 per square cm:

Cοst = (Area) x (Rate)

[tex]= (12\sqrt{(2)} cm^2) x (Rs. 9/cm^2)[/tex]

[tex]= Rs. 108\sqrt{(2)[/tex]

Therefοre, the cοst οf painting the triangle bοrder at the given rate is= [tex]Rs. 108\sqrt{(2)[/tex]

To learn more about triangle from the given link:

https://brainly.com/question/2773823
#SPJ1

The rate of change of cost C with respect to the percent of particulate pollution that escapes when p = 5 (percent) is -190000.

We know that the cost C, in dollars, of processing the exhaust gases at an industrial site to ensure that only p percent of the particulate pollution escapes is given by the equation C(p) = 7000(100− p) p

we have to find the rate of change of cost C with respect to the percent of particulate pollution that escapes when p = 5 (percent)

a) c (p) = 7600 (100-p) / p

c (p) = 7600 [p(-1) - (100-p) (1)] / 2p

= 7600/2p = 760000/4

= -190000

therefore, the rate of change of cost C with respect to the percent of particulate pollution that escapes when p = 5 (percent) is -190000.

To learn more about rate, click here:

brainly.com/question/29781084

#SPJ4

So, based on the resemblance between AA and SS, we can say: AEDC and AJKL

An enclosed triangle is a geometric shape with three sides and three angles in two dimensions. It is one of the fundamental geometric shapes and has several uses in both mathematics and daily life. Acute, obtuse, right, equilateral, isosceles, and scalene triangles are examples of popular types of triangles that can be categorized based on the size of their sides and angles. Triangle analysis is a crucial component of geometry and is used in disciplines including physics, engineering, and architecture.

given

Triangles in option (C) resemble those in (B).

If the matching sides and angles of two triangles are proportionate, then we can say that the triangles are comparable.

Triangle formed by AJKL and AEDC contains:

AED Equals AJK (both at 50 degrees)

ADS = ADE (both are right angles)

CDE = KLJ (both are right angles)

The triangles meet the angle-angle (AA) similarity requirement as a result.

Moreover, we have

DE/ JL = 52/39 AE/ AJ = 24/50 = 12/25

The triangles so also meet the side-side (SS) similarity requirement.

So, based on the resemblance between AA and SS, we can say: AEDC and AJKL

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The complete question is:-  State if the triangles in each pair are similar. If so, state how you know they are similar and complete the similarity statement.

AJKL~

A) not similar

B) similar; SSS similarity; ADCE C) similar; SAS similarity; AEDC D) similar; SSS similarity; ADEC

The triangle's other leg, side B, measures 12 cm in length.

When one of the interior angles is 90 degrees, or a right angle, the triangle is said to be a right triangle. The three internal angles of a triangle add up to 180 degrees in a right triangle because one angle must always be 90 degrees and the other two must always total to 90 degrees (they are complementary).

We can observe that the given triangle is a right triangle because angle A's measure is 90 degrees. The hypotenuse, which is represented by the letter "c," is the side that is opposite the right angle. The legs are the other two sides, and they are indicated by "a" and "b".

We are told that the hypotenuse (side c) is 13 cm long and that one leg (side a) is 5 cm long. The length of the other leg must be determined (side b).

The Pythagorean theorem, which asserts that in a right triangle, can be used.

a² + b² = c²

Inputting the values provided yields:

5² + b² = 13²

25 + b² = 169

b² = 144

b = 12

To know more about triangle's visit:-

https://brainly.com/question/2773823

#SPJ1

a) The mean is 720 and the standard deviation for the distribution is approximately 28.87

b. The probability that X is less than 710 is 33%

a. To calculate the mean and standard deviation, we use the following formulas:

Mean (μ) = (lower limit + upper limit) / 2

Standard deviation (σ) = (upper limit - lower limit) / √12

Substituting the values, we get:

Mean (μ) = (670 + 770) / 2 = 720

Standard deviation (σ) = (770 - 670) / √12 ≈ 28.87

b. To find the probability that X is less than 710, we use the following formula:

Probability (X < 710) = (710 - lower limit) / (upper limit - lower limit)

Substituting the values, we get:

Probability (X < 710) = (710 - 670) / (770 - 670) ≈ 0.33

This means that there is a 33% chance that X will be less than 710.

To know more about standard deviation here

https://brainly.com/question/16555520

#SPJ4

The regression coefficient associated with X1 and X2 interpret it increased by 33 and 22.

Test statistic represents that X2 makes a significant contribution to the model.

The regression coefficient associated with variable X1 is 33.

This means,

Holding all other variables constant, for every one unit increase in X1, Y is expected to increase by 33 units.

The regression coefficient associated with variable X2 is 22.

This means ,

Compared to the reference category  ,

Average value of Y for the category represented by X2 is expected to be 22 units higher.

Holding all other variables constant.

Null hypothesis for testing the contribution of variable X2 is that the coefficient of X2 is equal to zero,

X2 does not make a significant contribution to the model.

Alternative hypothesis is that the coefficient of X2 is not equal to zero,

X2 does make a significant contribution to the model.

The t-statistic for X2 is 3.21, and the p-value associated with this statistic is less than 0.10.

Reject the null hypothesis at the 0.10 level of significance.

p-value is less than 0.10,

Conclude evidence that variable X2 makes a significant contribution to the model.

learn more about regression here

brainly.com/question/13782974

#SPJ4

The above question is incomplete, the complete question is:

Suppose X1 is a numerical variable and X2 is a dummy variable with two categories and the regression equation for a sample of n =1919

is Modifying  Y with Y = 77 + 33X1 +22X2

a. Interpret the regression coefficient associated with variable

X1.

b. Interpret the regression coefficient associated with variable

X2.

c. Suppose that the test statistic for testing the contribution of variable

X2 is 3.213.21.

At the 0.100.10 level of​ significance, is there evidence that variable

X2 makes a significant contribution to the​ model?

Interpret the regression coefficient associated with variable X1?

Step-by-step explanation:

Arithmetic sequences: a2 = a1 + n

Geometric sequences: a2 = a1 * n

a. geometric (2 = 1 * 2, 4 = 2 * 2, 8 = 4 * 2 ...)

b. arithmetic (8 = 5 + 3, 11 = 8 + 3 ...)

c. arithmetic (10 = 5 + 5)

d. geometric (100 = 10 * 10)

In this data set, the only value that is an outlier is 100, since it is above the upper bound of 98.25.

To identify the outliers in the data set, we can use the concept of the interquartile range (IQR) and the 1.5×IQR criterion.

First, we need to find the first and third quartiles (Q1 and Q3) of the data set. To do this, we can order the data set from smallest to largest:

54, 72, 75, 81, 81, 82, 83, 83, 83, 85, 100

The median of the data set is the middle value, which is 82.

The lower half of the data set will consists of:

54, 72, 75, 81, 81

The median of the lower half is (72 + 75)/2 = 73.5, which is the value halfway between the two middle values.

The upper half of the data set will consists of:

83, 83, 83, 85, 100

The median of the upper half is (83 + 85)/2 = 84, which is the value halfway between the two middle values.

Therefore, the first quartile (Q1) is 73.5 and the third quartile (Q3) is 84.

The interquartile range (IQR) is the difference between Q3 and Q1:

IQR = Q3 - Q1 = 84 - 73.5 = 10.5

To identify the outliers in the data set using the 1.5×IQR criterion, we need to calculate the lower and upper bounds:

Lower bound = Q1 - 1.5×IQR = 73.5 - 1.5×10.5 = 57.75

Upper bound = Q3 + 1.5×IQR = 84 + 1.5×10.5 = 98.25

Any data point that is below the lower bound or above the upper bound is considered an outlier.

To know more about interquartile range here

https://brainly.com/question/4135956

#SPJ4

Answer: D

Step-by-step explanation:

i think so

Answer: 1.85

Step-by-step explanation:

Answer:

The required probability = 0.144

Step-by-step explanation:

Since the probability of making money is 60%, then the probability of losing money will be 100-60% = 40%

Now the probability we want to calculate is the probability of making money in the first two days and losing money on the third day.

That would be;P(making money) * P(making money) * P(losing money)Kindly recollect;P(making money) = 60% = 60/100 = 0.6P(losing money) = 40% = 40/100 = 0.4The probability we want to calculate is thus;0.6 * 0.6 * 0.4 = 0.144

Y1,Y2,Y3 denote a random sample from an exponential distribution with density funtion where θ(hat)1, θ(hat)2, θ(hat)3  and θ(hat)5 are unbiased. θ(hat)2 has the smallest variance among the unbiased estimators

To check for unbiasedness, we need to find the expected value of each estimator and see if it equals θ.

θ(hat)1 = Y1

E(θ(hat)1) = E(Y1) = θ

Thus, θ(hat)1 is an unbiased estimator.

θ(hat)2 = (Y1+Y2)/2

E(θ(hat)2) = E[(Y1+Y2)/2] = (1/2)[E(Y1) + E(Y2)] = θ

Thus, θ(hat)2 is an unbiased estimator.

θ(hat)3 = (Y1+2Y2)/3

E(θ(hat)3) = E[(Y1+2Y2)/3] = (1/3)[E(Y1) + 2E(Y2)] = θ

Thus, θ(hat)3 is an unbiased estimator.

θ(hat)4 = min(Y1,Y2,Y3)

For this estimator, we need to find the probability density function (pdf) of the minimum of the three random variables.

Let F_Y1_Y2_Y3 be the joint cumulative distribution function (cdf) of Y1,Y2,Y3, then the pdf of the minimum is given by:

f(θ(hat)4) = d/dy [F_Y1_Y2_Y3(y,y,y)] = 3(1/θ)e^-y/θf, y>0

E(θ(hat)4) = ∫0^∞ y(3/θ)e^-y/θ dy

= (3/θ) ∫0^∞ ye^-y/θ dy

Using integration by parts, we get:

= (3/θ) [θ + θ^2]

= 3θ + 3θ^2

Thus, θ(hat)4 is biased.

θ(hat)5 = Y (bar)

E(θ(hat)5) = E(Y (bar)) = E[(Y1+Y2+Y3)/3] = (1/3)[E(Y1) + E(Y2) + E(Y3)] = θ

Thus, θ(hat)5 is an unbiased estimator.

To compare the variances of the unbiased estimators, we need to compute their variances.

Var(θ(hat)1) = Var(Y1) = θ^2

Var(θ(hat)2) = Var[(Y1+Y2)/2] = (1/4)Var(Y1) + (1/4)Var(Y2) + (1/2)Cov(Y1,Y2)

Since Y1,Y2 are independent and identically distributed, Cov(Y1,Y2) = 0.

Thus, Var(θ(hat)2) = (1/4)θ^2 + (1/4)θ^2 = (1/2)θ^2

Var(θ(hat)3) = Var[(Y1+2Y2)/3] = (1/9)Var(Y1) + (4/9)Var(Y2) + (4/9)Cov(Y1,Y2)

Again, Cov(Y1,Y2) = 0, so Var(θ(hat)3) = (1/9)θ^2 + (4/9)θ^2 = (5/9)θ^2

Var(θ(hat)4) = Var(min(Y1,Y2,Y3))

Let X = min(Y1,Y2,Y3). Then,

F_X(x) = P(X ≤ x) = P(min(Y1,Y2,Y3) ≤ x)

= 1 - P(Y1 > x and Y2 > x and Y3 > x)

Since Y1,Y2,Y3 are independent,

= 1 - P(Y1 > x)P(Y2 > x)P(Y3 > x)

= 1 - (e^-x/θ)^3

Thus, the pdf of X is given by:

f_X(x) = d/dx[F_X(x)] = 3(e^-x/θ)^2 (1/θ)e^-x/θf, x>0

Using the formula for the variance of a continuous random variable, we get:

Var(θ(hat)4) = ∫0^∞ [x - E(θ(hat)4)]^2 f_X(x) dx

= ∫0^∞ [x - (3θ + 3θ^2)]^2 3(e^-x/θ)^2 (1/θ)e^-x/θf dx

= 6θ^2

Thus, Var(θ(hat)4) = 6θ^2.

Var(θ(hat)5) = Var(Y (bar)) = Var[(Y1+Y2+Y3)/3]

= (1/9)Var(Y1) + (1/9)Var(Y2) + (1/9)Var(Y3) + (2/9)Cov(Y1,Y2) + (2/9)Cov(Y1,Y3) + (2/9)Cov(Y2,Y3)

Since Y1,Y2,Y3 are independent, Cov(Yi,Yj) = 0 for i ≠ j.

Thus, Var(θ(hat)5) = (1/9)θ^2 + (1/9)θ^2 + (1/9)θ^2 = (1/3)θ^2.

Therefore, among the unbiased estimators, θ(hat)1, θ(hat)2, θ(hat)3, and θ(hat)5, the one with the smallest variance is θ(hat)2.

To know more about exponential distribution:

https://brainly.com/question/22692312

#SPJ4

The value of k is 1/2π, and X and Y are independent because their joint density function factors into a product of their Probability density functions.

To find the value of k, we use the fact that the total area under the joint probability density function equals 1. That is:

integral from 0 to infinity of integral from 0 to infinity of kxye^(-x^2-y^2) dx dy = 1

Using polar coordinates (x = r cos(theta), y = r sin(theta)), the double integral can be written as:

integral from 0 to 2pi of integral from 0 to infinity of k r^3 e^(-r^2) dr d(theta) = 1

The integral over theta is just 2pi, so we can simplify to:

2pi k integral from 0 to infinity of r^3 e^(-r^2) dr = 1

Solving this integral, we get:

2pi k (-1/2) e^(-r^2)| from 0 to infinity = 1

Since e^(-r^2) goes to 0 as r goes to infinity, we have:

pi k = 1/2

Therefore, k = 1/(2pi).

To prove that X and Y are independent, we need to show that the joint probability density function can be factored into the product of the marginal probability density functions:

f(x,y) = f_X(x) * f_Y(y)

The marginal probability density function of X is given by:

f_X(x) = integral from 0 to infinity of kxye^(-x^2-y^2) dy

= kxe^(-x^2) * integral from 0 to infinity of ye^(-y^2) dy

The integral from 0 to infinity of ye^(-y^2) dy is a known integral equal to 1/2, so we have:

f_X(x) = kxe^(-x^2) / 2

Similarly, the marginal probability density function of Y is given by:

f_Y(y) = kye^(-y^2) / 2

Therefore, we have:

f_X(x) * f_Y(y) = k^2 xy e^(-(x^2+y^2))

Comparing this to the joint probability density function given in the problem, we can see that:

f(x,y) = f_X(x) * f_Y(y)

Thus, X and Y are independent.

To know more about probability density function:

https://brainly.com/question/30403935

#SPJ4

____The given question is incomplete, the complete question is given below:

The joint probability density function of two-dimensional continuous random variable (X,Y) is given by > 0, y >0; f(x,y) = 0, otherwise, kxye-(x2+y2). Find the value of k and prove also that X and Y are independent.

the maximum potential loss for this strategy is limited to the net cost of $3 if the stock price stays below the breakeven point of $63, but can be unlimited if the stock price rises significantly above the breakeven point

The maximum potential loss for this strategy can be calculated as the difference between the premiums received and paid. In this case, the customer pays a premium of $6 to buy the ABC May 60 call and receives a premium of $3 for selling the ABC May 17th call. Hence, the total cost for this strategy is $6 - $3 = $3.

The breakeven point for this strategy can be calculated as the strike price of the long call plus the net cost of the strategy, which is $60 + $3 = $63.

If the ABC stock price stays below the breakeven point of $63, both options will expire worthless, and the maximum loss for this strategy will be the net cost of $3.

However, if the ABC stock price rises above the breakeven point of $63, the short call option that was sold will be in the money, and the buyer of the option can exercise it, forcing the seller to sell the shares at the strike price of $17. This means that the maximum loss for this strategy will be unlimited if the stock price rises significantly above the breakeven point.

In summary, the maximum potential loss for this strategy is limited to the net cost of $3 if the stock price stays below the breakeven point of $63, but can be unlimited if the stock price rises significantly above the breakeven point. Therefore, it's important to have a risk management plan in place to mitigate potential losses in case the stock price moves against the expected direction.

To know more about maximum potential loss click here:

brainly.com/question/29729311

#SPJ4

a customer buys one abc may 60 call at 6 and sells one abc may 17th call at 3 when abc stock is selling at 63% the maximum potential loss is?

The composition f(g(x)) will not be a function of real values if g(x) is not a real number or f(g(x)) is not defined. Thus, the answer is f(x) = sqrt(2,9)(x) = -22. The correct option is A).

The composition f(g(x)) will not be a function of real values if there exists a value of x such that g(x) is not a real number or f(g(x)) is not defined for the output of g(x).

f(x) = sqrt(2,9)(x) = -22

This function is not well-defined because the square root of a negative number is not a real number. Therefore, the composition f(g(x)) is not a function of real values.

f(x) = -22, g(x) = sqrt(π)

g(x) is not a real number because the square root of pi is not a rational number. Therefore, the composition f(g(x)) is not a function of real values.

f(x) = x², g(x) = -22

The composition f(g(x)) = (-22)² = 484 is a real number. Therefore, the composition is a function of real values.

f(x) = ln(x), g(x) = -22

The input of f(x) must be positive because the natural logarithm of a non-positive number is not a real number. Since g(x) is a constant value of -22, the composition f(g(x)) = ln(-22) is not a real number. Therefore, the composition is not a function of real values.

f(x) = -22, g(x) = x²

The composition f(g(x)) = -22 is a real number. Therefore, the composition is a function of real values.

f(x) = -22, g(x) = ln(2)

The composition f(g(x)) = -22 is a real number. Therefore, the composition is a function of real values.

Therefore, the answer option is (A) f(x) = sqrt(2,9)(x) = -22.

To know more about function of real values:

https://brainly.com/question/30024751

#SPJ4

_____The given question is incomplete, the complete question is given below:

Which of the following functions will result in the composition f(g(x)) not being a function of real values? A. f(x) = V2,9(x) = -22 B. f(x) = -22, g(x) = VƏ c. f(x) = x², 9(x) = -22 D. f(x) = ln(x), g(x) = -22 E. f(x) = -22, g(x) = x2 F. f(x) = -22, g(x) = ln(2) G. None of the above.

The converted linear programming problem in standard form is given by

maximize 2^i - f x₂ + 0x₁ + 0s₁ + 0s₂ + 0s₃ + 0s₄ where s₁, s₂, s₃, and s₄ are the slack variables.

convert the linear programming problem to standard form,

Introduce slack variables to represent the inequalities,

And rewrite the objective function as a linear expression.

First, let us introduce the slack variables,

x₁ + s₁= 2

x₂ + s₂ = 3 + 2t

2x₂ + s₃ = 5

s₄ = -x₂

where s₁, s₂, s₃, and s₄ are the slack variables.

Rewrite the objective function as a linear expression,

Maximize 2^i - f x2

= maximize 2^i - f x₂ + 0x₁ + 0s₁ + 0s₂ + 0s₃ + 0s₄

Now we have the linear programming problem in standard form,

maximize 2^i - f x₂ + 0x₁ + 0s₁ + 0s₂ + 0s₃ + 0s₄

subject to,

x₁ + s₁ = 2

x₂ + s₂ = 3 + 2t

2x₂ + s₃ = 5

s₄ = -x₂

x₁ >= 0, s₁ >= 0

x₂ >= 0, s₂ >= 0, t >= 0

s₃ >= 0, s₄ >= 0

Added a new variable t to represent the inequality

x₂ % 2 < 3,

which can be rewritten as x₂ = 2t + r,

where r is the remainder of x₂ divided by 2.

Require t to be non-negative, and r to be less than 2.

Learn more about  maximize here

brainly.com/question/28149384

#SPJ4

The rate of change (or slope) of this linear function is -1/2.

A linear function is a mathematical function that has a constant rate of change, meaning that the output (y-value) changes at a constant rate for every unit increase in the input (x-value). In other words, the graph of a linear function is a straight line.

The general form of a linear function is y = mx + b, where m is the slope of the line (the rate of change) and b is the y-intercept (the point where the line crosses the y-axis). The slope represents how much the y-value changes for every one-unit increase in the x-value.

Linear functions can be used to model many real-world situations, such as distance vs. time or cost vs. quantity. They are also commonly used in economics, physics, and engineering.

The rate of change of a linear function represents the slope of the line. We can calculate the slope using the formula:

slope = (change in y) / (change in x)

Let's use the points (0, -3) and (2, -4) to calculate the slope:

slope = (-4 - (-3)) / (2 - 0)

slope = -1 / 2

Therefore, the rate of change (or slope) of this linear function is -1/2.

To know more about slope visit:

https://brainly.com/question/20828026

#SPJ1

Answer: 4.5 litres

Step-by-step explanation:

If 1.5 liters of red paint is mixed with white paint to make 6 liters of pink paint, then the ratio of red paint to the total mixture is 1.5/6 = 0.25.

Since the pink paint is made by mixing red paint with white paint, the ratio of white paint to the total mixture is 1 - 0.25 = 0.75.

Therefore, to find the amount of white paint needed, we can set up the following proportion:

1.5/0.25 = x/0.75

Solving for x, we get:

x = 0.75 * 1.5 / 0.25 = 4.5

So, 4.5 liters of white paint is needed to make 6 liters of pink paint.

Hi!

If 6 liters were to be made, and 1.5 liters of red is needed, then we would subtract 1.5 from 6 to get your final answer
6 - 1.5 = 4.5.
So, 4.5 liters of white will be needed to make 6 liters of paint.

Hope this helps!

~~~PicklePoppers~~~

Answer:

------------------------

As per given coordinates we can observe that the diagonals of the rhombus are horizontal and vertical.

The length of the diagonal is the difference of x-coordinates for the horizontal diagonal and the difference of y-coordinates for the vertical one.

The diagonals have the length:

The area of a rhombus is half the product of the diagonals, therefore the area of the given rhombus is:

The area οf the given rhοmbus is 22.5 square units. Tο find the area οf the rhοmbus, we need tο first find the length οf its diagοnals.

A rhοmbus is a type οf quadrilateral that has fοur sides οf equal length. It is alsο knοwn as a diamοnd οr a lοzenge. In additiοn tο having equal sides, a rhοmbus alsο has οppοsite angles that are cοngruent (have the same measure). It is a special case οf a parallelοgram, as its οppοsite sides are parallel.

Tο find the area οf the rhοmbus, we need tο first find the length οf its diagοnals. We can dο this using the distance fοrmula:

[tex]\rm d_1 = \sqrt{((4 - (-2))^2 + (-4 - (-1))^2)} = \sqrt{(6^2 + (-3)^2)} = \sqrt{(45)[/tex]

[tex]\rm d_2 = \sqrt{((-8 - (-2))^2 + (-4 - (-7))^2)} = \sqrt{((-6)^2 + 3^2)} = \sqrt{(45)[/tex]

Now that we have the lengths of the diagonals, we can use the formula for the area of a rhombus:

Area = [tex]\rm (d_1 \times d_2) / 2 =\dfrac{ (\sqrt{(45)} \times \sqrt{(45)}}{2}[/tex]

= (45/2) square units

Therefore, the area of the given rhombus is 22.5 square units.

To learn more about rhombus from the given link:

https://brainly.com/question/27870968

#SPJ1

When conducting course-based human research, Informing participants about what will happen to the data gathered is an essential aspect of ethical research practice and can contribute to the overall quality and credibility of the research. This includes explaining how the data will be collected, stored, and analyzed, as well as how it will be used and potentially shared with others.

By informing participants about the use of their data, researchers can build trust and transparency with their participants. Participants have the right to know how their data will be used and to provide informed consent to participate in the study. This also allows participants to make an informed decision about whether or not they want to participate in the study.

Furthermore, informing participants about the use of their data can help ensure that ethical guidelines are followed and that the study is conducted in a responsible and respectful manner. This can help to prevent any potential harm to participants and can contribute to the overall validity and reliability of the study.

To know more about research:

https://brainly.com/question/5135512

#SPJ4

As per the axial force, the support reaction at A is equal in magnitude to the axial force that is applied at the other end of the bar.

To determine the support reaction at A, we will draw a free-body diagram of the bar.

Since the bar is fixed at A, the support reaction at that end will be a vertical force, and we will label it as RA.

Using Newton's second law of motion, we can write the equation of equilibrium for the bar in the vertical direction:

ΣFy = 0

where ΣFy is the sum of all the forces in the vertical direction. Since there are only two forces acting on the bar, the axial force and the support reaction, we can write:

-FA + RA = 0

where FA is the axial force that is applied at one end, and RA is the support reaction at the other end.

From this equation, we can solve for RA:

RA = FA

To know more about axial force here

https://brainly.com/question/31060177

#SPJ4

Complete Question:

Determine the support reaction at A

The axially loaded bar is fixed at A and loaded as shown. Draw a free-body diagram and determine the support reaction at A.

The closed formula for this particular sequence is an = n² + 2.

Take note that the odd numbers 3, 5, 7, 9, and 11 are separate consecutive terms. This shows that the first n odd numbers can be added to the initial term, az, to get the nth term. Hence, the following is how we may represent the nth term a = az + 1 + 3 + 5 + ... + (2n-3) (2n-3). We may utilize the formula for the sum of an arithmetic series to make the sum of odd integers simpler that is 1 + 3 + 5 + ... + (2n-3) = n².

As a result, we get a = az + n^2 - 1. In conclusion, the equation for the series (an)n21, where a1 = az and an is the result of adding the first n odd numbers to az, is as a = az + n^2 - 1. We have the following for the given series where a1 = az = 3.

So, the closed formula for this particular sequence is an = n² + 2.

To learn more about arithmetic sequences, refer to:

Your question is incomplete. The complete question is:

Find the closed formula for the sequence (an)n21. Assume the first term given is az. an = 3, 6, 11, 18, 27... Hint: Think about the perfect squares.