If y varies inversely as x and y=3 when x = 3, find y when x =4.

The test resulted in an upper-tailed test of hypothesis, and we need to locate the p-value for it. The p-value represents the probability of obtaining a test statistic as extreme as the one observed, assuming that the null hypothesis is true.

a. The p-value for the upper-tailed test of hypothesis can be found in the Excel/DDXL output. In this case, the p-value is 0.0438.

b. To make a decision regarding the null hypothesis tested, we compare the p-value to the level of significance (α) chosen. If the p-value is less than α, we reject the null hypothesis, otherwise, we fail to reject it. In this case, the level of significance is not given, so we assume α to be 0.05. As the p-value (0.0438) is less than α (0.05), we reject the null hypothesis.

Therefore, the decision made using the p-value agrees with the decision made in Exercise 6.30, which was to reject the null hypothesis that the true mean fee charged is less than or equal to $6,500. In other words, the data provides evidence to support the claim that the true mean fee charged exceeds $6,500.

In conclusion, the given exercise uses hypothesis testing to determine whether the true mean fee charged for a full-service funeral exceeds $6,500 or not. The analysis shows that there is enough evidence to reject the null hypothesis and support the claim that the true mean fee charged is higher than $6,500. The p-value obtained is 0.0438, which is less than the level of significance assumed (0.05).

To know more about Average visit :

https://brainly.com/question/24057012

#SPJ11

To convert x and y screen coordinates to a one-dimensional coordinate, you can use a formula like:

1D_coordinate = y * screen_width + x

where y is the vertical screen coordinate (starting from 0 at the top), x is the horizontal screen coordinate (starting from 0 at the left), and screen_width is the total width of the screen in pixels.

This formula assumes that the x and y coordinates are measured in pixels and that the screen is a rectangular shape. The resulting 1D coordinate represents a unique position on the screen and can be used to index into an array or buffer containing data associated with the screen.

To know more about one-dimensional coordinate refer here:

https://brainly.com/question/11830050

#SPJ11

The value of ƒ(2) for the given piecewise function is -12. This means that when x is exactly 2 or falls within the second condition x ≥ 2, the expression -8x + 4 is used to calculate the value.

Answer :   ƒ(2) = -12.

To evaluate ƒ(2) for the given piecewise function, we need to substitute x = 2 into the appropriate expression based on the given conditions.

For x < 2, the expression is x = 6x + 1. However, since x = 2 in this case, which is not less than 2, we cannot use this expression.

For x >= 2, the expression is -8x + 4. Since x = 2 in this case, which satisfies the condition, we can evaluate ƒ(2) using this expression.

ƒ(2) = -8(2) + 4

      = -16 + 4

      = -12

Therefore, ƒ(2) = -12.

Learn more about function  : brainly.com/question/31062578

#SPJ11

The upper and lower bounds on the moduli of the zeros of the given polynomial, we construct the companion matrix using its coefficients. The eigenvalues of this matrix provide the zeros.

To begin, we construct the companion matrix associated with the given polynomial, which is a square matrix formed by coefficients. In this case, the companion matrix is:

C = [[0, 0, 0, 0, 0, 0, 0, 20i24], [1, 0, 0, 0, 0, 0, 0, -i], [0, 1, 0, 0, 0, 0, 0, 2i], [0, 0, 1, 0, 0, 0, 0, 0], [0, 0, 0, 1, 0, 0, 0, 2], [0, 0, 0, 0, 1, 0, 0, 0], [0, 0, 0, 0, 0, 1, 0, 0], [0, 0, 0, 0, 0, 0, 1, 0]].

The eigenvalues of this matrix are precisely the zeros of the polynomial. By applying Gershgorin's theorem, we can establish upper and lower bounds on the moduli of these eigenvalues. Gershgorin's theorem states that each eigenvalue lies within at least one Gershgorin disc, which is a circular region centered at each diagonal entry of the matrix with a radius equal to the sum of the absolute values of the off-diagonal entries in the corresponding row.

By examining the Gershgorin discs for the companion matrix C, we can determine upper and lower bounds for the moduli of the eigenvalues (zeros of the polynomial). These bounds provide valuable information about the possible locations and values of the zeros. By calculating the radius of each disc and considering the diagonal entries, we can estimate the upper and lower limits for the moduli of the zeros.

In conclusion, by utilizing companion matrices and applying Gershgorin's theorem, we can establish upper and lower bounds on the moduli of the zeros of the given polynomial. These bounds offer insights into the possible values and locations of the zeros, aiding in the understanding of the polynomial's behaviour and properties.

Learn more about eigenvalues here:

https://brainly.com/question/29861415

#SPJ11

Approximately 15% was saved on the rain boots.Given a pair of rain boots that cost $45, but on sale, was reduced to $38.25.To find the percent saved

we'll use the following formula:Percent saved = (Amount saved / Original price) × 100 Amount saved = Original price - Sale price Amount saved = $45 - $38.25Amount saved = $6.75

Now, we can find the percent saved as follows :Percent saved = (Amount saved / Original price) × 100Percent saved

To calculate the percentage saved on the rain boots, you can use the following formula:

Percentage Saved = ((Original Price - Sale Price) / Original Price) * 100

Given: Original Price = $45

Sale Price = $38.25

Using the formula:

Percentage Saved = ((45 - 38.25) / 45) * 100

Percentage Saved = (6.75 / 45) * 100

Percentage Saved ≈ 0.15 * 100

Percentage Saved ≈ 15%

Therefore, approximately 15% was saved on the rain boots.

to know more about percent visit :

https://brainly.com/question/28840349

#SPJ11

The correct answer is D. No, because the vertical scale exaggerates the differences between brands.

Step 1: Examine the information presented in the graph. The graph shows the strength of three paper towel brands: Brand X, Brand Y, and Brand Z. The strength values are represented on the y-axis, ranging from 90 to 100 with increments of 5.

Step 2: Compare the strength values of the brands. According to the graph, Brand X has a strength of 100, Brand Y has a strength of 105, and Brand Z has a strength of 110.

Step 3: Evaluate the claim made by the makers of Brand Z. They claim that Brand Z is twice as strong as Brand X.

Step 4: Assess the accuracy of the claim. Based on the actual strength values provided in the graph, Brand Z is not exactly twice as strong as Brand X. The difference in strength between the two brands is only 10 units.

Therefore, the claim made by the makers of Brand Z is not supported by the graph. The graph does not show a clear indication that Brand Z is twice as strong as Brand X. The vertical scale of the graph exaggerates the differences between the brands, leading to a potential misinterpretation of the data. Therefore, it is not valid to agree with the claim based solely on the information provided in the graph.

To know more about graph , visit:

https://brainly.com/question/15685482

#SPJ11

The area of the surface of the cap cut from the paraboloidz S ≈ 13.4952

We need to find the surface area of the cap cut from the paraboloid by the cone.

The equation of the paraboloid is z = 12 - 2x^2 - 2y^2.

The equation of the cone is z = √x^2 + y^2.

To find the cap, we need to find the intersection of these two surfaces. Substituting the equation of the cone into the equation of the paraboloid, we get:

√x^2 + y^2 = 12 - 2x^2 - 2y^2

Simplifying and rearranging, we get:

2x^2 + 2y^2 + √x^2 + y^2 - 12 = 0

Letting u = x^2 + y^2, we can rewrite this equation as:

2u + √u - 12 = 0

Solving for u using the quadratic formula, we get:

u = (3 ± √21)/2

Since u = x^2 + y^2, we know that the cap is a circle with radius r = √u = √[(3 ± √21)/2].

To find the surface area of the cap, we need to integrate the expression for the surface area element over the cap. The surface area element is given by:

dS = √(1 + fx^2 + fy^2) dA

where fx and fy are the partial derivatives of z with respect to x and y, respectively. In this case, we have:

fx = -4x/(√x^2 + y^2)

fy = -4y/(√x^2 + y^2)

So, the surface area element simplifies to:

dS = √(1 + 16(x^2 + y^2)/(x^2 + y^2)) dA

dS = √17 dA

Since the cap is a circle, we can express dA in polar coordinates as dA = r dr dθ. So, the surface area of the cap is given by:

S = ∫∫dS = ∫∫√17 r dr dθ

Integrating over the circle with radius r = √[(3 ± √21)/2], we get:

S = ∫0^2π ∫0^√[(3 ± √21)/2] √17 r dr dθ

S = 2π √17/3 [(3 ± √21)/2]^(3/2)

Simplifying and approximating to four decimal places, we get:

S ≈ 13.4952

Learn more about surface here

https://brainly.com/question/28776132

#SPJ11

The given function h(t) = -16[tex]t^2[/tex] + 48t + 160 represents the height, in feet, of an object at time t seconds after it is launched from the top of a 160-foot tall building.

The function h(t) = -16[tex]t^2[/tex]+ 48t + 160 is a quadratic function that models the height of the object. The term -16[tex]t^2[/tex] represents the effect of gravity, as it causes the object to fall downward with increasing time. The term 48t represents the initial upward velocity of the object, which counteracts the effect of gravity. The constant term 160 represents the initial height of the object, which is the height of the building.

By evaluating the function for different values of t, we can determine the height of the object at any given time. For example, if we substitute t = 0 into the function, we get h(0) = -16[tex](0)^2[/tex] + 48(0) + 160 = 160, indicating that the object is initially at the height of the building. As time progresses, the value of t increases and the height of the object changes according to the quadratic function.

Learn more about quadratic function here:

https://brainly.com/question/18958913

#SPJ11

Based on the provided evidence, the analysis suggests that "b" is more likely than 20% to be the correct choice

To evaluate whether "b" is more likely than 20% to be the correct choice, we can conduct a hypothesis test. The null hypothesis (H0) assumes that the probability of "b" being the correct choice is 20% (or 0.2), while the alternative hypothesis (Ha) assumes that the probability is greater than 20%.

Using the binomial distribution, we can calculate the expected number of questions with "b" as the correct choice if the probability is 20%. In this case, the expected number would be 0.2 multiplied by the total number of questions (400), resulting in 80 questions.

Next, we can perform a one-sample proportion test to determine if the observed proportion of 90/400 (0.225) significantly deviates from the expected proportion of 0.2. By comparing the observed proportion to the expected proportion using appropriate statistical tests (such as a z-test or chi-square test), we can assess if the difference is statistically significant.

If the p-value associated with the test is less than the chosen significance level (commonly 0.05), we can reject the null hypothesis and conclude that "b" is more likely than 20% to be the correct choice.

Learn more about p-value here:

https://brainly.com/question/30461126

#SPJ11

To find real numbers a and b such that the equation (a - 3)(b + 2i) = 8 + 4i is true, we need to equate the real and imaginary parts of both sides of the equation separately. By solving the resulting equations, we can determine the values of a and b.

Let's first expand the left side of the equation:

(a - 3)(b + 2i) = ab + 2ai - 3b - 6i.

Equating the real parts, we have:

ab - 3b = 8.

Equating the imaginary parts, we have:

2ai - 6i = 4i.

From the first equation, we can rewrite it as:

b(a - 3) = 8.

Since we're looking for real numbers a and b, we know that the imaginary parts (ai and i) should cancel out. Therefore, the second equation simplifies to:

-4 = 0.

However, this is a contradiction since -4 is not equal to 0. Therefore, there are no real numbers a and b that satisfy the equation (a - 3)(b + 2i) = 8 + 4i

Learn more about real numbers here:

https://brainly.com/question/31715634

#SPJ11

The mean of X is y, and the variance of X is also y.

To find the mean and variance of the random variable X, which follows a Poisson distribution with parameter y, we need to use the relationship between the exponential distribution and the Poisson distribution.

Given that Y follows an exponential distribution with parameter λ, we know that the probability density function (PDF) of Y is:

f_Y(y) = λ * e^(-λy) for y ≥ 0

To find the mean of X, denoted as E(X), we can use the property of the exponential distribution that states the mean of an exponential random variable with parameter λ is equal to 1/λ. Therefore, we have:

E(Y) = 1/λ

Now, let's consider X, which follows a Poisson distribution with parameter y. The mean of a Poisson random variable is equal to its parameter. Hence:

E(X) = y

To find the variance of X, denoted as Var(X), we use the relationship between the exponential and Poisson distributions. The variance of an exponential distribution is given by 1/λ^2, and for a Poisson distribution, the variance is equal to its parameter. Therefore:

Var(Y) = (1/λ)^2

Var(X) = y

So, the mean of X is y, and the variance of X is also y.

Know more about the variance

https://brainly.com/question/18762724

#SPJ11

To prove that there exists a value x between a and b such that f(x) = 0 when f(a)f(b) < 0, we can use the Intermediate Value Theorem.

The Intermediate Value Theorem states that if a function f is continuous on a closed interval [a, b] and f(a) and f(b) have opposite signs, then there exists at least one value c in the interval (a, b) such that f(c) = 0.

Given that f is a real-valued continuous function on the real numbers, we can apply the Intermediate Value Theorem to prove the existence of a value x between a and b where f(x) = 0.

Since f(a) and f(b) have opposite signs (f(a)f(b) < 0), it means that f(a) and f(b) lie on different sides of the x-axis. This implies that the function f must cross the x-axis at some point between a and b.

Therefore, by the Intermediate Value Theorem, there exists at least one value x between a and b such that f(x) = 0.

This completes the proof.

To learn more about Intermediate Value Theorem go to:

https://brainly.com/question/30403106

#SPJ11

The function f(x) = 3x^4 - 6x^2 + 7 has a local maximum at x = 0 and local minimums at x = ±√(2/3).

The given function f(x) = 3x^4 - 6x^2 + 7 is a polynomial of degree four. To determine the local extrema, we can use the first derivative test.

Taking the derivative of f(x) with respect to x, we get f'(x) = 12x^3 - 12x. To find critical points, we set f'(x) equal to zero and solve for x:

12x^3 - 12x = 0

12x(x^2 - 1) = 0

x(x + 1)(x - 1) = 0

From this equation, we find three critical points: x = 0, x = -1, and x = 1.

Now, we can analyze the sign of the derivative in the intervals (-∞, -1), (-1, 0), (0, 1), and (1, +∞) to determine the nature of the extrema.

For x < -1, the derivative is negative, indicating that f(x) is decreasing in this interval. For -1 < x < 0, the derivative is positive, meaning that f(x) is increasing. In the interval 0 < x < 1, the derivative is negative, and for x > 1, the derivative becomes positive again.

Based on the first derivative test, we can conclude that f(x) has a local maximum at x = 0 and local minimums at x = ±√(2/3).

Learn more about first derivative test

brainly.com/question/29753185

#SPJ11

The volume of the cylinder is 164.85 ft³.

We have the dimension of cylinder

Radius = 15/2 =7 .5 ft

Height = 7 ft

Now, the formula for Volume of Cylinder is

= 2πrh

Plugging the value of height and radius we get

Volume of Cylinder is

= 2πrh

= 2 x 3.14 x 7.5/2 x 7

=  3.14 x 7.5 x 7

= 164.85 ft³

Thus, the volume of the cylinder is 164.85 ft³.

Learn more about Volume of cylinder here:

https://brainly.com/question/15891031

#SPJ1

To evaluate the integral of the function 2(6x - 6)(4x²+ 9)dx from 0, follow these steps:

1. Rewrite the given function: The integral is ∫[2(6x - 6)(4x² + 9)]dx.

2. Distribute the 2 into the parentheses: ∫[12x(4x² + 9) - 12(4x² + 9)]dx.

3. Expand the integrand: ∫[48x³ + 108x - 48x² - 108]dx.

4. Combine like terms: ∫[48x³ - 48x² + 108x - 108]dx.

5. Integrate term by term:

  ∫48x³dx = (48/4)x⁴ = 12x⁴
  ∫-48x²dx = (-48/3)x³ = -16x³
  ∫108xdx = (108/2)x² = 54x²
  ∫-108dx = -108x

6. Combine the integrated terms: 12x⁴ - 16x³ + 54x²- 108x + C, where C is the constant of integration.

Since the given problem does not provide limits of integration, the final answer is the indefinite integral:

The integral of 2(6x - 6)(4x² + 9)dx is 12x⁴ - 16x³+ 54x² - 108x + C.

To know more about Integration visit:

https://brainly.com/question/22008756

#SPJ11

The value of SP is-5(c).

The formula for calculating the sum of products (SP) is:

P = Σ(XY) - [(ΣX)(ΣY) / n]

where Σ(XY) represents the sum of the products of each corresponding X and Y value, ΣX represents the sum of all X values, ΣY represents the sum of all Y values, and n represents the total number of data points.

The first term Σ(XY) calculates the sum of the products of each corresponding X and Y value. The second term [(ΣX)(ΣY) / n] calculates the expected value of the product of X and Y, assuming no covariance.

Given ΣX = 15, ΣY = 5, ΣXY = 10, and n = 5, we can substitute these values in the formula:

SP = 10 - [(15)(5) / 5]

SP = 10 - 15

SP = -5

Therefore, the value of SP is -5(c).

For more questions like Products click the link below:

https://brainly.com/question/31787776

#SPJ11

The height of the traffic cone is 11.619 inches.

To know height of the traffic cone, we will use the formula for the volume of a cone, which is given by [tex]V = (1/3) * \pi * r^2 * h[/tex] where V is the volume, π is 3.14, r is the radius  and h is the height.

Plugging values we have:

[tex]2442.112 = (1/3) * 3.14159 * 8.2^2 * h.\\2442.112 = 3.14159 * 67.24 * h.\\h = 2442.112 / (3.14159 * 67.24).\\h = 11.5608127508\\h = 11.56 in.[/tex]

Read more about cone height

brainly.com/question/26494957

#SPJ1

The approximate solution rounded to six decimal places is x ≈ -0.030387.

(a) To find the exact solution in terms of logarithms, we'll use the property of logarithms that allows us to rewrite an exponential equation in logarithmic form. For our equation, we can take the natural logarithm (base e) of both sides:
-6x = ln(5)
Now, we can solve for x by dividing both sides by -6:
x = ln(5) / -6
This is the exact solution in terms of logarithms.
(b) To find an approximation of the solution rounded to six decimal places, use a calculator to compute the natural logarithm of 5 and divide the result by -6:
x ≈ ln(5) / -6 ≈ 0.182321 / -6 ≈ -0.030387
 

Learn more about equation here:

brainly.com/question/13763238

#SPJ11

Let's denote the number of small wagons as 'S' and the number of large wagons as 'L'.

From the given information, we can set up the following constraints:

Constraint 1: 4S + 6L ≤ 60 (since the owner has no more than 60 hours available to make wagons)

Constraint 2: S ≥ 6 (since the owner wants to have at least 6 small wagons to sell)

We also have the profit equations:

Profit from small wagons: 12S

Profit from large wagons: 20L

To maximize the profit, we need to maximize the objective function:

Objective function: P = 12S + 20L

So, the problem can be formulated as a linear programming problem:

Maximize P = 12S + 20L

Subject to the constraints:

4S + 6L ≤ 60

S ≥ 6

By solving this linear programming problem, we can determine the optimal number of small wagons (S) and large wagons (L) to maximize the profit, given the constraints provided.

Learn more about equations here:

https://brainly.com/question/29657983

#SPJ11

To evaluate the given integral in polar coordinates, we first need to express the equation of the top half of the disk with center the origin and radius 4 in polar coordinates. The value of the given integral by changing to polar coordinates is 200/3π.

To evaluate the given integral using polar coordinates, we first need to determine the bounds of integration for r and θ. Since D is the top half of the disk with center the origin and radius 4, we have 0 ≤ r ≤ 4 and 0 ≤ θ ≤ π. We can then convert the integrand in rectangular coordinates, 5x^2y, into polar coordinates using x = rcos(θ) and y = rsin(θ). Thus, we have:

∫∫D 5x^2y dA = ∫0^π ∫0^4 5(rcos(θ))^2(rsin(θ)) r dr dθ

= 5∫0^π cos^2(θ)sin(θ) dθ ∫0^4 r^4 dr

= 5(1/3)(-cos^3(θ))∣0^π (1/5)r^5∣0^4

= (5/3)π(0-(-1)) (1/5)(4^5-0)

= 200/3π.

Therefore, the value of the given integral by changing to polar coordinates is 200/3π.

Learn more about polar coordinates here:

https://brainly.com/question/31904915

#SPJ11

The approximate solutions to the equation cos x = -0.60 for the domain 0° ≤ x ≤ 360° are 53° and 307°.

First, we need to identify the angles for which the cosine function is equal to -0.60.

We can use a calculator or reference table to find that the cosine of 53° is approximately -0.60.

However, we need to check if 53° is within the given domain of 0° ≤ x ≤ 360°.

Since 53° is within this range, it is a possible solution to the equation.

Next, we need to check if there are any other angles within the domain that satisfy the equation.

To do this, we can use the periodicity of the cosine function, which means that the cosine of an angle is equal to the cosine of that angle plus a multiple of 360°. In other words,

if cos x = -0.60 for some angle x within the domain, then

cos (x + 360n) = -0.60 for any integer n.

We can use this property to find any other possible solutions to the equation by adding or subtracting multiples of 360° from our initial solution of 53°.

To know more about equation here

brainly.com/question/18408802

#SPJ1

The missing step in solving the inequality 4(x – 3) + 4 < 10 + 6x is step 6: The division property of inequality: x > -9

The missing step in solving the inequality 4(x – 3) + 4 < 10 + 6x is step 6: The division property of inequality.

After step 4, which is -2x < 18, we need to divide both sides of the inequality by -2 to solve for x.

However, since we are dividing by a negative number, the direction of the inequality sign needs to be reversed.

Dividing both sides by -2:

-2x / -2 > 18 / -2

This simplifies to:

x > -9

Therefore, the correct answer is x > -9.

Learn more about inequality at https://brainly.com/question/25275758

#SPJ1

The value of x is 20.1 cm.

Given that y = 12 cm and θ = 35°,

We can work out x rounded to 1 DP.

The trigonometric functions are real functions that connect the angle of a right-angled triangle to side length ratios. They are widely utilized in all geosciences, including navigation, solid mechanics, celestial mechanics, geodesy, and many more.

The straight line that "just touches" a plane curve at a particular location is called the tangent line. It was defined by Leibniz as the line connecting two infinitely close points on a curve.

Using the trigonometric ratio of a tangent, we can calculate x

tanθ = opposite/adjacent

tan35° = y / x

x = y / tanθ

x = 12 / tan35°

x ≈ 20.1 cm (rounded to 1 decimal place)

Therefore, x ≈ 20.1 cm.

To learn more about trigonometric ratios here:

https://brainly.com/question/24349828

#SPJ11

The limit of ln x × 3√x as x approaches infinity is negative infinity.

To calculate this limit, we can use L'Hôpital's rule:

limx→∞ ln x × 3√x

= limx→∞ (ln x) / (1 / (3√x))

We can now apply L'Hôpital's rule by differentiating the numerator and denominator with respect to x:

= limx→∞ (1/x) / (-1 / [tex](9x^{(5/2)[/tex]))

= limx→∞[tex]-9x^{(3/2)[/tex]

As x approaches infinity, [tex]-9x^{(3/2)[/tex]approaches negative infinity, so the limit is:

limx→∞ ln x × 3√x = -∞

Therefore, the limit of ln x × 3√x as x approaches infinity is negative infinity.

for such more question on  L'Hôpital's rule

https://brainly.com/question/25829061

#SPJ11

The sum of 502.07 and 1.4 is 503.47. (option c)

To add decimal numbers, we align the decimal points and add the corresponding digits from right to left. If there are any missing places after the decimal point, we assume they are zero.

=> 502.07 + 1.4

Align the decimal points.

502.07

1.40

Add the digits from right to left.

Starting from the rightmost column (the hundredths place), we have 7 + 0, which equals 7.

Moving to the next column (the tenths place), we have 0 + 4, which equals 4.

In the next column (the ones place), we have 2 + 1, which equals 3.

Finally, in the leftmost column (the hundreds place), we have 5 + 0, which equals 5.

Write the sum.

502.07

1.40

503.47

Therefore, the sum of 502.07 and 1.4 is 503.47. (option c).

To know more about decimal here

https://brainly.com/question/9543292

#SPJ4

Statistics that allow for inferences to be made about a population from the study of a sample are known as inferential statistics.

Inferential statistics is a branch of statistics that deals with making inferences about a population based on information obtained from a sample. It involves estimating population parameters, such as mean and standard deviation, using sample statistics, such as sample mean and sample standard deviation.

The main goal of inferential statistics is to determine how reliable and accurate the estimated population parameters are based on the sample data. This is done by calculating a confidence interval or conducting hypothesis testing.

Confidence intervals provide a range of values in which the population parameter is likely to lie, whereas hypothesis testing involves testing a null hypothesis against an alternative hypothesis.

For more questions like Statistics click the link below:

https://brainly.com/question/31577270

#SPJ11

Answer:

a) x = -10. b) x = 7

Step-by-step explanation:

a)

2(x + 3) = x -4

multiply out the bracket:

2(x + 3) = 2x + 6.

now we have 2x + 6 = x - 4.

subtract x from both sides:

2x - x + 6 = -4

x + 6 = -4

subtract 6 from both sides:

x = -10.

b)

4(5x - 2) = 2(9x + 3)

multiply out both brackets:

20x - 8 = 18x + 6

subtract 18x from both sides:

20x - 18x - 8 = 6

2x - 8 = 6

add 8 to both sides:

2x = 14

x = 7

The polynomial that represents the volume of the room in standard form is x³ + 20x² + 10x + 144 cubic units.

In Mathematics and Geometry, the volume of a rectangular prism can be calculated by using the following formula:

Volume of a rectangular prism = L × W × H

Where:

By substituting the given dimensions (side lengths) into the formula for the volume of this rectangular room, we have the following;

Volume of rectangular room = (x + 6) × (x + 12) ×  (x + 2)

Volume of rectangular room = x³ + 20x² + 10x + 144 cubic units.

Read more on volume of prism here: brainly.com/question/21012007

#SPJ1

The solution to the initial value problem is:

[tex]y = -(x^2-5)ln|x^2-5| + (7+3ln3)/9[/tex]

To solve this initial value problem, we can use the method of integrating factors.

First, we identify the coefficients of the equation:

[tex](x^2 - 5) y' - 2xy = -2x(x^2 - 5)[/tex]

Next, we multiply both sides of the equation by the integrating factor, which is given by:

[tex]IF = e^{-∫(2x/(x^2-5)dx)} = e^{-2 ln|x^2-5|} = e^{ln(x^2-5)}^{(-2)} = (x^2-5)^{(-2)}[/tex]

Multiplying both sides of the equation by the integrating factor, we get:

[tex](x^2-5)^{-2} (x^2 - 5) y' - 2x(x^2-5)^{-2} y = -2x(x^2-5)^{-1}[/tex]

Simplifying the left-hand side using the product rule, we get:

[tex]d/dx [(x^2-5)^(-1)] y = -2x(x^2-5)^{-1}[/tex]

Integrating both sides with respect to x, we get:

[tex](x^2-5)^(-1) y = -ln|x^2-5| + C[/tex]

where C is an arbitrary constant of integration.

Multiplying both sides by [tex](x^2-5)[/tex], we get:

[tex]y = -(x^2-5)ln|x^2-5| + C(x^2-5)[/tex]

To find the value of C, we use the initial condition y(2) = 7:

[tex]7 = -(2^2-5)ln|2^2-5| + C(2^2-5)[/tex]

7 = -3ln3 + 9C

C = (7+3ln3)/9.

For similar question on integrating factors.

https://brainly.com/question/12931578

#SPJ11

Comparing the values of δz and dz, we have:

δz - dz = 8.9957 - (-0.75) ≈ 9.7457

Since δz - dz is positive, we can conclude that δz is greater than dz.

To compare the values of δz and dz, we can use the partial derivative of z with respect to x and y, and the given change in x and y:

∂z/∂x = 2x - y

∂z/∂y = -x - 14y^2

At the point (1, -1), we have:

∂z/∂x = 2(1) - (-1) = 3

∂z/∂y = -(1) - 14(-1)^2 = -15

Using the formula for total differential:

dz = (∂z/∂x)dx + (∂z/∂y)dy

Substituting the given change in x and y, we get:

dz = (3)(-0.04) + (-15)(0.05) = -0.75

Therefore, dz = -0.75.

To find δz, we can use the formula:

δz = z(0.96, -0.95) - z(1, -1)

Substituting the given points into the function z, we get:

z(0.96, -0.95) = (0.96)^2 - (0.96)(-0.95) - 7(-0.95)^2 ≈ 1.9957

z(1, -1) = 1^2 - 1(-1) - 7(-1)^2 = -7

Substituting these values into the formula, we get:

δz = 1.9957 - (-7) = 8.9957

Therefore, δz = 8.9957.

Comparing the values of δz and dz, we have:

δz - dz = 8.9957 - (-0.75) ≈ 9.7457

Since δz - dz is positive, we can conclude that δz is greater than dz.

To know more about partial derivatives refer here :

https://brainly.com/question/31397807#

#SPJ11