Answer:
I think the answer is 416 square feet
Explanation:
figure out each wall then add them together
8 ×12=96
8×14=112
there are 2 of each
96+96+112+112= 416
While rowing across a lake, John does 3960 ft-lbs of work over 120 ft. How much force is John using?
66W. Explanation: Formula of Power: Worktimetaken. Given: Work = 3960J and time taken = 60.0s. Using the formula: Worktimetaken. = 3960J60.0s. = 66W.
Which of the following best describes the basic purpose of the internet?
The internet protects the privacy of sensitive information.
The internet sends information from one computer to another.
The internet stores data.
The internet connects input and output devices to a computer.
Answer:
I would say it's B. "The internet sends information from one computer to another"
Explanation:
I am not completely sure but if you want you can give it an try :)
A horse pulls a cart along a road with a force of 550 lbs. If the horse does 2,674,100 ftlbs of work by the time it stops, how far did the horse pull the cart?
Answer:
When a horse pull a cart the action is on?
A horse is harnessed to a cart. If the horse tries to pull the cart, the horse must exert a force on the cart. By Newton's third law the cart must then exert an equal and opposite force on the horse. Newton's second law tells us that acceleration is equal to the net force divided by the mass of the system.
Explanation:
Answer:
approximately 222,841.6666666667 feet
An air mass usually forms in an area of____.
a. low pressure because its stable
b. low pressure because its unstable
c. high pressure because its unstable
d. high pressure because its stable
The air-fuel mixture is actually burned during the:
(A) power stroke.
(B) intake stroke
(C) exhaust stroke.
(D) compression stroke.
Answer:
Exhaust stroke
Explanation: well exhaust usually means air related so...
An engine has been diagnosed with blowby.
Technician A says the engine could have a
cracked flywheel. Technician B says the com-
pression rings could be worn. Who is right?
(A) A only
(B) Boniy
(C) Both A and B.
(D) Neither A nor B
B only, is right technician A says the engine could have a cracked flywheel. Technician B says the compression rings could be worn. Thus, option (b) is correct.
What is technician?A Technician installs, inspects, repairs, or changes complex systems, or performs diagnostic or structural tests. IT Technicians, Lab Technicians, Automotive Engineers, Laboratory Staff, Service Technicians, Clinical Pharmacists, and Dental Engineers are all examples of engineers.
Both technicians agreed that it was because of the differences in the objects. The engine can have a fractured flywheel if the A is being worked on. The compression rings, as the first B, might be worn. The expert was the circles on the pressed.
Therefore, option (b) is correct.
Learn more about on technician, here:
https://brainly.com/question/14290207
#SPJ2
If y varies directly as x , and y =-4 when x=8, find y when x=8
Answer:
y=-4
Explanation:
If y=-4 when x=8, y=-4 when x=8
Answer: y=-4
Explanation:
y = 4 when x = 8 So, 4 = 8k
k = 1/2
y = (1/2)x
Thanks for the points <3
Prelest! Introduction to Engineering and Technology 1 Select the correct answer. What technological invention allowed for the prevalence of automation? OA. external combustion engines OB. electromagnets OC. computers OD. internal combustion engines. please help me
Answer:
I would think OD. Computers
Explanation:
If y varies inversely as x, and y =14 when x=8 , find y when x=7
Answer:
16
Explanation:
When checking your tires, it's most important to check their___.
A.springiness and color
B.inflation and tread depth
C.inflation and springiness
D.brand and traction
A. A compound gear train is composed of four gears: E,F,G,H. Gear E has 15 teeth and is meshed with gear F. Gear F has 25 teeth and shares a shaft with Gear G, which has 18 teeth. Gear G is meshed with Gear H, the output gear. Power is supplied at gear E with 150 ft.lb of torque and is moving at 2000 rpm.
A. Sketch and annotate the gear train described above.
B. The necessary torque output of the system is 600 ft.lb. What should the gear ratio of the system be?
Formula Sub/solve Final answer(3 SF)
C. With a system torque output of 600 ft.lb, how many teeth should gear H have?
Formula Sub/solve Final answer(3 SF)
Answer:
What subject is this in?? That would help a lot knowing
Explanation:
If you have a box of candy that measures 8 inches long, 5 inches wide and 2 inches tall, how much room do you have for the candy
What role does heat play in the formation of convection currents?
Choose the correct answer.
A. When water loses heat, it becomes denser and sinks.
B. When water gains heat, it becomes denser and sinks.
C.When water loses heat to cooler water, the cooler water becomes denser and sinks.
D. When water gains heat, it dissolves more solids and gases, becomes denser, and sinks.
Give me an A please!!!¡!!!!¡
Answer:
I am in 6th grade why am i in high school things.
Explanation:
tions #1-15 are worth 3 points each
1. By definition, Oxy-Acetylene welding is a process of
a. Fusion
b. Adhesion
C. Carbonation
d. Oxidation
Ladanhand format
oldin