Answer:
it's called an overflow
During the merge sort operation for the list {90 7 9 43 62 12 21 36}, at what left and right partition position is 21 added to the temporary list
The point at left and right partition position to add 21 is Left position is 1 and right position is 7.
How do you solve merge sort?The Algorithm for Merge Sort operations are:
First one need to find the middle index of the array. Then one has to Divide the array from the middle. Then do Call merge sort for the second half of the array. Then one can finally merge two sorted halves into one sorted array.Hence, The point at left and right partition position to add 21 is Left position is 1 and right position is 7.
See Group of answer choices
Left position is 2 and right position is 6
Left position is 1 and right position is 7
Left position is 4 and right position is 7
Left position is 2 and right position is 5
Learn more about sort operation from
https://brainly.com/question/15090822
#SPJ1
The system log daemon, rsyslogd, creates a socket for other system processes to write to. what is the path to this socket?
If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.
What is the system log daemon?The syslog daemon is known to be a kind of a server process that is known to often gives or provides a form of message logging tools that is made for application and system processes.
Note that the syslog daemon is said to be one that begins by the Internet Daemon and it is also one that tend to receives messages on well-known port such as 514.
Note that The syslog daemon must be on before any application program and as such, If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.
Learn more about system log from
https://brainly.com/question/25594630
#SPJ1
See full question below
The System Log Daemon, rsyslogd, creates a socket for other system processes to write to. What is the path to this socket?
Select one:
a. /etc/rsyslog.socket
b. /var/log.sock
c. /tmp/log
d. /dev/log
What is a "Top-Level Domain Name"?
A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.
What is a "Top-Level Domain Name"?This is known to be the biggest level in terms of the hierarchical Domain Name System of the Internet.
Note that TLD (top-level domain) is said to be the most generic domain that is seen on the Internet's hierarchical DNS (domain name system) as A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.
Learn more about Domain Name from
https://brainly.com/question/13437432
#SPJ1
The developers have used the results from the model to choose a computer controlled flood defense system. It will have a barrier which can open or close. describe the role of the microprocessor in such a system
key word sensor , ADC , microprocessor, Preset , higher and lower barrier
The role of the microprocessor in a computer controlled flood defense system are:
The flood signal makes the microprocessor to start a flood control work or function that tends to interrupts the constant operating cycle that is known to be executed.
Note that if any, and it start and keeps the operation of a drain cycle until the water is known to have returns to the constant level for a a given period of time.
What is the role of the microprocessor?The Functions of Microprocessor are:
It helps to control or monitors all the parts of the machine and it often sends timing signals.It helps to move data between memory and I/O devices.It helps to bring back data and instructions from a given memory.The microprocessor is known to be one that acts as the central unit of a computer system that carries out duties such as the arithmetic and logic operations.
Hence, The role of the microprocessor in a computer controlled flood defense system are:
The flood signal makes the microprocessor to start a flood control work or function that tends to interrupts the constant operating cycle that is known to be executed.Note that if any, and it start and keeps the operation of a drain cycle until the water is known to have returns to the constant level for a a given period of time.Learn more about microprocessor from
https://brainly.com/question/614196
#SPJ1
Accenture began its own Cloud journey in 2015, after our internal IT organization recognized the significant advantages to be gained in leveraging Cloud capabilities at scale. Today, which percentage of Accenture's infrastructure and processes are in the Cloud?
Answer: 95%
Explanation:
Accenture began its own Cloud journey in 2015, and invested in about $3 billion to move to cloud. This has helped the company in timely delivery and achieving organizational goals.
Today, the percentage of Accenture's infrastructure and processes that are in the Cloud is about 95%. Its HR, sales, finance, legal system etc are all in cloud.
The percentage of Accenture's infrastructure and processes that are stored or located in the Cloud is: 95%.
A Cloud can be defined as the elastic leasing of pooled computer resources (physical hardware) over the Internet and through the use of virtualization.
Accenture is one of the world's largest management and technological consulting company that provide services such as:
Database managementConsultingStrategy planningOutsourcingBasically, Accenture help business organizations in the implementation of data governance and management policies, in order to ensure the organization's data is trustworthy and reliable.
In 2015, Accenture started its own Cloud journey after recognizing the significant advantages it stand to gain or benefit in leveraging Cloud capabilities at a larger scale.
Consequently, the percentage of Accenture's infrastructure and processes that are stored or located in the Cloud is 95 percent.
Read more: https://brainly.com/question/23844088
Question #6
Multiple Choice
What tag is used to contain information about a web page, such as the title and related pages?
O
O
Answer: b; head
Explanation:
Answer: <head>
Explanation: EDGE '23
PLEASE HELP ME! Sam was researching rocks and minerals. He thought the Web site looked unprofessional, so he looked for the author's information or credentials. He couldn't find any. Is this site reliable? A. Probably B. Probably not.
Answer:
B
Explanation:
If a site looks unprofessional and doesn't have any credentials, those are two signs that it's probably not very reliable.
What is the 3 common keys used to access the BIOS.
Answer:
To access your BIOS, you'll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
When using spanning tree protocol. What is the first step in selecting paths through a network?
The first step in selecting paths through a network is STP must first select the root bridge, or master bridge.
Which one is the first step in STP operation?The STP network convergence consists in three steps: elect a root bridge, elect root ports and elect designated and non-designated ports. When you enable STP, the first step in its convergence process is to elect a switch to act as a root bridge using the Spanning Tree Algorithm.
See more about STP at brainly.com/question/20039073
#SPJ1
Create a file name that to ensure the that the file is easy to find
Answer:
I always name mine something like HI
or YEET i dont know
why but it works
Explanation:
You have a user remotely connecting to the corporate network from a client location. They can connect to the corporate network file server. But they cannot access files and folders they need on the client LAN in order to work on their project. What would you enable in order to allow the user to access resources on both networks while the VPN is connected
I don't really get this question but I will go with hotspot
Write a loop that will take in 5 numbers from the user and output the average. Round your answer to two decimal places.
Sample Run:
Enter a number: 2
Enter a number: 7
Enter a number: 11
Enter a number: 4
Enter a number: 5
The average is 5.8
Hurry please!! will mark brainliest!!
Assembler Language
CSCI 360-1 Assignment 4 Name_____________________
Spring 2019 ABENDs and Dump Reading
25 points
This programming assignment does not require any further coding or documentation than what is provided. The program will ABEND and your task is to learn how to investigate what happened so that you can debug your own Assembler programs in the future. To begin, run the following program on the Marist mainframe using the ASSIST JCL used previously. Be sure you type it or copy it EXACTLY as shown below:
DUMP1 CSECT
USING DUMP1,15 ESTABLISH REG 15 AS BASE REG
*
SR 2,2 CLEAR REG 2
*
LA 3,NUM1 LOAD ADDRESS OF NUM1 INTO REG 3
LA 4,NUM2 LOAD ADDRESS OF NUM2 INTO REG 4
*
A 2,0(,3) ADD NUM1 TO REG 2
A 2,0(,4) ADD NUM2 TO REG 2
*
LA 5,SUM LOAD ADDRESS OF SUM INTO REG 5
ST 2,0(,5) STORE THE SUM OF NUM1 & NUM2 AT SUM
*
XDUMP , SET REG 2 TO 35
*
LTORG
*
SUM DC F'0' FULLWORD OF ZERO TO LATER HOLD SUM
*
NUM1 DC F'1206000000' VARIOUS FULLWORD INTEGER VALUES
NUM2 DC F'972460'
NUM3 DC F'1344335922'
*
END DUMP1
Use the resulting ABEND dump output to answer the questions below. Each is worth 2 points except question 11 which is worth 5 points.
Did this error occur (a) while the program was being assembled or (b) when it was being run?
________________________________________________________________________________
What is the address of the next instruction which would have been executed?________________________________________________________________________________
What is the value of the condition code at the time of the ABEND?
________________________________________________________________________________
What is the length of the instruction that caused the ABEND (number of bytes)?
_______________________________________________________________________________
What is the address of the instruction that caused the abend?
_________________________________________________________________________________
What type of error occurred (number and name)?
_________________________________________________________________________________
What usually causes this error?
_________________________________________________________________________________
What does the value in register 2 represent at the time of the ABEND dump?
__________________________________________________________________________________
What instruction needs to be added to fix this ABEND?
_________________________________________________________________________________
What does the value stored at location counter value 00002C represent?
_________________________________________________________________________________
What exactly happened here to cause the ABEND? Be detailed but succinct in your description.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
hello thnks
Explanation:
When making routine transponder code changes, pilots should avoid inadvertent selection of which code?
When making routine transponder code changes, pilots should avoid inadvertent selection of code. 7700.
What are the transponder code that pilot should avoid?Under normal as well as non-emergency operations, it is very essential for pilot to make sure he avoid using the transponder codes of 7500, as well as 7600, and 7700.
Especially while switching codes, It is easy in switching by pilot to go to of these 3 codes on accident.
In this case, When making routine transponder code changes, pilots should avoid inadvertent selection of code. 7700.
Learn more about general emergency on:
https://brainly.com/question/14331925
#SPJ1
We initialize the parameters to all zero values and run the linear perceptron algorithm through these points in a particular order until convergence. The number of mistakes made on each point are shown in the table below. (These points correspond to the data point in the plot above)
The main aim of running the parameters in the linear perceptron algorithm is to be able to develop a machine learning algorithm for binary classification tasks.
What is a linear perceptron algorithm?This refers to the linear classification algorithm that is used in machine learning.
This is done in order to learn a decision boundary that divides different classes using a hyperplane.
Hence, we can see that your question is incomplete because the parameters are not included, hence a general overview was given to give you a better understanding of the concept.
Read more about machine learning here:
https://brainly.com/question/25523571
#SPJ1
If you would like to give another user permissions on your mailbox or to particular folders within your mailbox, which role should you configure?
Assignee
Client
Delegate
Manager
Answer:
I think it's B, Delegate
Explanation:
Cause the other options didn't seem to fit as the answer.
I really don't know though.
A delegate is someone who has been granted permission by another user to access. The correct answer would be an option (C).
What is a mailbox?A computer-simulated mailbox that stores email messages. Mailboxes are saved on a disc as a message file or a message database.
A delegate is someone who has been granted permission by another user to access and manage their mailbox, including sending and responding to email messages on their behalf.
When you grant delegate access to another person, you are giving them the ability to access specific folders within your mailbox and perform specific actions, such as reading, sending, and deleting email messages.
Assignee, client, and manager are not terms typically used in the context of delegate access in email systems.
Thus, the correct answer would be option (C).
Learn more about the mailbox here:
https://brainly.com/question/28430685
#SPJ6
Write a definition in your own words for Raster Graphic. Do not copy and paste please.
Answer:
Raster Graphic is a bitmap. They are basically a grid of small pixels that make an image.
When posting to a professional networking account, you should share stories and comments that _____.
When posting to a professional networking account, you should share stories and comments that Offer valuable information to your target audience
What is meant by a professional networking account?This is used to refer to an account that has a large number of audiences or of people who follow the account based on what the owner of the network offers. The reason for this may be due to the fact that account is a blog that talks about health or about lifestyle.
It is advised that the person who is behind the account keep the people that are his audiences in mind whenever he is sharing posts to the account. The information that would be most useful to the people has to be considered.
Hence we can say that When posting to a professional networking account, you should share stories and comments that Offer valuable information to your target audience
Read more on networking here:https://brainly.com/question/1027666
#SPJ1
Gui screen usually contain elements that are called?
Answer: Widgets
Components
Controls
Explanation:
Computer professionals known as software engineers, or Blank______, use the software development life cycle to create software required for information systems.
Answer:
Computer professionals known as software engineers, or programmers use the software development life cycle to create software required for information systems.
Explanation:
Computer professionals are called software engineers and programmers because they develop and program software. Some additional titles for computer professionals are hardware engineers and iOS/Android developers.
True or false? you should avoid using your power point slides as handouts, according to the text.
Define a function SwapRank() that takes two char parameters passed by reference and swap the values in the two parameters. The function does not return any value. Ex: If the input is A C, then the output is: C A
The program that takes two char parameters passed by reference and swap the values in the two parameters is illustrated below.
What is a program?A computer program is a sequence of instructions in a programming language for a computer to execute.
The program is illustrated below:
void SwapGrade(char &g1, char &g2)
{
char t = g1;
g1= g2;
g2 = t;
}
Output
B
C
C B
Learn more about program on:
https://brainly.com/question/26642771
#SPJ1
which computer can be used where is no electricity ?
Answer:
mechanical computers
Explanation:
A mechanical computer is built from mechanical components such as levers and gears rather than electronic components. The most common examples are adding machines and mechanical counters, which use the turning of gears to increment output displays.
Answer:
Non-electric computers.
A mechanical computer is a computer built from mechanical components such as levers and gears rather than electronic components
What are the three advantages of using blockchain technology? multiple choice all of the answer choices are correct. digital trust internet of things integration immutability
The three advantages of using blockchain technology are:
digital trust internet of thingsimmutabilityWhat is blockchain technology?A Blockchain is known to be a kind of a chain of blocks that is made up of information.
Note that the data that are said to be stored inside a block is one that is based on the type of blockchain. Blockchain is seen as a kind of a shared, form of immutable ledger that quickens the process of putting down or recording transactions and helps in the tracking of assets in a business network.
Hence, The three advantages of using blockchain technology are:
digital trust internet of thingsimmutabilityLearn more about blockchain technology from
https://brainly.com/question/25700270
#SPJ1
If you connect to a network through your phone or cable company, then you probably connect through a________.
If you connect to a network through your phone or cable company, then you probably connect through an Ethernet crossover cable.
What is meant by the ethernet cable?This is the type of cable that is known to be used for the wired types of connections. These types of cables are unlike the other types of connections such as the broadband which may be an internet type of connection that people use.
The ethernet cables are cables to connect using those devices that are in the the local area networks. The popular example is the router. Hence we can say that If you connect to a network through your phone or cable company, then you probably connect through an Ethernet crossover cable.
Read more on ethernet here: https://brainly.com/question/1637942
#SPJ1
scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
What is SJF in operating system?SJF is a term that connote Shortest Job First. It is said to be a type of CPU scheduling whose algorithm is linked with each as it is said to process the length of the next CPU burst.
Note that for one to be able to know the time for the next CPU burst to take place, one need to take the SJF into consideration as that is its function.
Hence, SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
See options below
A) Multilevel queue
B) RR
C) FCFS
D) SJF
Learn more about scheduling from
https://brainly.com/question/19309520
#SPJ1
Create a program that will calculate and print to the screen a sales receipt
Answer:
The Code:
print('Invoice Bill')
table = Table(['Item Name', 'Item Price'])
total = 0
while(1):
name = input('Enter Item name:')
# "x" to exit and print the table
if(name != 'x'):
price = int(input('Enter the Price:'))
# store all the prices in "total"
total += price
table.add_row([name, price])
continue
elif(name == 'x'):
break
table.add_row(['TOTAL', total])
print(table)
print('Your total bill amount is ', total, '/-')
Explanation:
This program is written in the PYTHON language.
The user needs to enter the item name and price as much as they want; this will print the item name, item price and total in tabular form.
#SPJ2
Write a written report about the possible input devices of the future?
Answer:
Its inevitable, people will make errors while using your input device. It is crucial that you measure how many of each of these types of errors are made, so you are able to use techniques to effectively counter them: 1. Mistakes —User uses the wrong method to achieve the tasks 2. Slips — The method used carried out incorrectly.
Explanation:
Output values below an amount Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, which indicates a threshold. Output all integers less than or equal to that last threshold value. Assume that the list will always contain fewer than 20 integers. java
The program that first gets a list of integers from input, gets the last value from the input, which indicates a threshold, and outputs all integers less than or equal to that last threshold value is:
import java.util.Scanner;
public class LabProgram {
/* Define your methods here */
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
int[] userValues = new int[20];
int upperThreshold;
int numVals;
numVals = scnr.nextInt();
GetUserValues(userValues, numVals, scnr);
upperThreshold = scnr.nextInt();
OutputIntsLessThanOrEqualToThreshold(userValues, numVals, upperThreshold);
}
}
Read more about java programming here:
https://brainly.com/question/26952414
#SPJ1
Figure shows a multiplexer in a synchronous TD slot is only 10 bits long (3 bits taken from each input plus is the output stream? The bits arrive at the multiplexer arrows.
The solution to the bits arrive at the multiplexer arrows is shown in the image attached.
What is a multiplexer used for in computing?A multiplexer is known to be a kind of a device that is same to be one that is able to take a lot of analog signals and also helps to forwards the input that were taken into a single line.
Note that they are seen as devices that are often used to to boast the amount of data that are known to be passed over a network.
A good example of a given non-electronic circuit of a multiplexer is known to be the single pole multi-position switch.
Therefore, The solution to the bits arrive at the multiplexer arrows is shown in the image attached. because it accurately tells the the arrangement of the 10 bits in the arrow.
Learn more about multiplexer from
https://brainly.com/question/15052768
#SPJ1