The correct answer is option D.2 years
What is Kepler's third law of planetary motion?According to Kepler's Third Law of Planetary Motion, T² is proportional to r³, where T is the period of revolution of the planet and r is the distance between the planet and the star.
In order to solve for T,
AU = 1
Astronomical Unit = the average distance between the Earth and the Sun = 149.6 million kilometres
Therefore, the planet is orbiting at a distance of 149.6 million kilometres from the star.
Substituting the values of r and solving for
T².T² ∝ r³T² ∝ (149.6)³T²
= (149.6)³T²
= 3.522 x 10¹²T
= √3.522 x 10^¹²T
= 1.87 x 10⁶ seconds
T = 31,100 minutes
T = 518 hours
T = 21.6 days
T = 2 years
Therefore, the orbital period of the planet with twice the mass of Earth orbiting at a distance of 1 AU from a star with the same mass as the Sun is 2 years.
To know more about Kepler's third law of planetary motion:
https://brainly.com/question/4978861
#SPJ11
An apple fell 6.0 m from a tree to the ground. What additional information is needed to calculate both the gravitational potential energy of the apple and its kinetic energy?
the volume of the apple and the time the apple was in the air
the mass of the apple and the amount of energy lost to air resistance
the average acceleration of the apple and the time the apple was in the air
the average velocity of the apple and the amount of energy lost to friction
For calculation of potential energy mass of the apple , average acceleration of the apple and height of apple is required.
Energy While for calculation of kinetic energy volume of the apple and time the apple was in air, the average velocity of the apple and amount of energy lost to friction is required.Based on the force exerted on the two objects, the potential energy equation is determined. P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.The relationship between kinetic energy and an object's mass and squared velocity is given by K.E. = 1/2 m v2. If the mass is measured in kilograms and the speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.For more information on kinetic and potential energy kindly visit to
https://brainly.com/question/11749818
#SPJ1
the blue whale can produce sound with an intensity that is 1 million times greater than the intensity of the loudest sound a human can make. find the difference in the loudness of the sounds made by a blue whale and a human.
The difference in loudness between the sound made by a blue whale and a human is 120 decibels.
The difference in the loudness of the sounds made by a blue whale and a human.The loudest sound a human can make is measured at about 140 decibels, while the sound a blue whale can make is measured at about 260 decibels. This means that the blue whale can produce a sound that is 1 million times greater in intensity than the loudest sound a human can make. This difference in loudness is equal to 120 decibels.
The difference in loudness between the sound made by a blue whale and a human is 120 decibels. The loudest sound a human can make is measured at about 140 decibels, while the sound a blue whale can make is measured at about 260 decibels. This means that the blue whale can produce a sound that is 1 million times greater in intensity than the loudest sound a human can make.
Learn more about loudness of the sounds here:
https://brainly.com/question/26861471
#SPJ1
A student standing on the ground throws a ball straight up. The ball leaves the student's hand with a speed of 11 m/s when the hand is 1.8 m above the ground. How long is the ball in the air before it hits the ground? (The student moves her hand out of the way.)
The ball is in the air for about 1.8 seconds before it hits the ground after it leaves the student's hand with a speed of 11 m/s when the hand is 1.8 m above the ground.
Projectile motion is a kind of movement experienced by an object or particle (a projectile) that is projected near the Earth's surface and moves along a curved path under the gravity of the Earth. In general, projectile motion refers to a free-body's motion influenced only by gravity. A student throws a ball straight up while standing on the ground. When her hand is 1.8 m above the ground, the ball leaves her hand at a speed of 11 m/s. The time the ball is in the air before it hits the ground is calculated as follows:Using the equation:
∆y = v0yt + 1/2gt² Where ∆y is the displacement (in this case, -1.8 m) of the projectile along the vertical axis, v0y is the initial vertical velocity (in this case, 11 m/s), t is the time of flight, and g is the acceleration due to gravity (9.81 m/s²):-1.8 m = (11 m/s)t + (1/2)(-9.81 m/s²)t².Rearranging the equation, we get:-4.905t² + 11t - 1.8 = 0.
Using the quadratic formula, we get:t = (-11 ± sqrt(11² - 4(-4.905)(-1.8))) / (2(-4.905))= 1.77 s or t = 0.20 s. Since the ball is in the air for approximately 1.77 s before it hits the ground, and the student's hand is 1.8 m above the ground, the ball is in the air for about 1.8 seconds before it hits the ground. Therefore, the correct answer is the option C, 1.8 seconds.
More on Projectile motion: https://brainly.com/question/29325336
#SPJ11
select all of the following descriptions that match what happens when a ferromagnetic material is placed in an external magnetic field. a. the ferromagnetic material becomes magnetized. b. nothing, ferromagnetic materials do not interact with magnetic fields. c. the ferromagnetic material becomes negatively charged. d. the ferromagnetic material becomes positively charged. e. the external magnetic field induces magnetic poles in the ferromagnetic material. f. the ferromagnetic material rapidly cools.
A. The ferromagnetic material becomes magnetized: Ferromagnetic materials are strongly magnetic and become magnetized when placed in an external magnetic field. The magnetic domains within the material align themselves with the external field, resulting in a strong net magnetic moment.
E. The external magnetic field induces magnetic poles in the ferromagnetic material:The external magnetic field induces a magnetic moment in the ferromagnetic material, which causes it to behave as a magnet. The magnetic moment induced by the external field is much stronger than that of other materials, such as diamagnetic or paramagnetic materials.
Therefore, the correct statements are (a) and (e). Ferromagnetic materials are strongly magnetic and can be magnetized, unlike diamagnetic or paramagnetic materials, which are only weakly magnetic and do not become magnetized in an external magnetic field.
To know more about Ferromagnetic materials , visit :
https://brainly.com/question/30548333
#SPJ1
An engineer is designing the runway for an airport. Of the plane that will use the airport, the lowest acceleration rate is likely to be 3 m/s2 . The takeoff speed for this plane will be 65 m/s. Assuming this minimum acceleration, what is the minimum allowed length for the runway?
Answer:
Approximately [tex]705\; {\rm m}[/tex].
Explanation:
Let [tex]x[/tex] denote the distance travelled before the plane takes off.
Let [tex]u[/tex] denote the initial velocity of the plane, and let [tex]v[/tex] denote the velocity of the plane when it takes off. It is given that the takeoff speed is [tex]v = 65\; {\rm m\cdot s^{-1}}[/tex]. Assuming that the plane was initially stationary, initial velocity would be [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex].
It is given that the acceleration of the plane would be [tex]a = 3\; {\rm m\cdot s^{-2}}[/tex].
Since acceleration is constant, apply the SUVAT equation [tex]x = (v^{2} - u^{2}) / (2\, a)[/tex] to find the value of [tex]x[/tex]:
[tex]\begin{aligned} x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \frac{(65)^{2} - (0)^{2}}{2\, (3)}\; {\rm m} \\ &\approx 705\; {\rm m}\end{aligned}[/tex].
(Rounded up.)
Hence, the length of the runway should be at least [tex]705\; {\rm m}[/tex].
Q4. Convert these into proper vector notation:
Westward velocity of 42 km/h.
Position 6. 5 measured in m that is North of the reference point.
Downward acceleration measured in m/s2 that has a magnitude of 1. 9.
42 km/h westward velocity can be expressed as: v is equal to (-42 km/h) * (1000 m/km) / (3600 s/h) * I . Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).
where the unit vector pointing west is called i. If we condense this expression, we get: v = -11.67 m/s * I Hence, -11.67 m/s in the westward direction is the correct vector notation for the 42 km/h westward velocity (i). North of the reference point, position 6.5 measured in metres, can be expressed as: r = 6.5 m * j where j represents the unit vector pointing north. Hence, 6.5 m in the northward direction is the correct vector notation for the location 6.5 m north of the reference point (j). It is possible to express a downward acceleration with a magnitude of 1.9 in m/s2 as follows: a = -1.9m/s^2 * k where k is the unit vector in the downward direction. Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).
learn more about vector notation here:
https://brainly.com/question/17264346
#SPJ4
Find the frequency w for which the particular solution to the differential equation dạy dy 3 + dt + 3y iwt =e dt2 has the largest amplitude. You can assume a positive frequency w > 0. Probably the easiest way to do this is to find the particular solution in the form Aeiwt and then minimize the modulus of the denominator of A over all frequencies w. = ليا 0 ? X 0% Try a new variant Correct answer W = 0.971825315808
It is estimated that the frequency for which the specific solution has the maximum amplitude is 0.971825315808.
The differential equation is as follows: dy/dt + 3y iwt = e(t2)
If we assume that the specific answer is of the form Aeiwt, we may substitute it in the equation to obtain the following result: (iwt + 3).
Aeiwt equals e(t2).
We arrive at A = e(-t2) / (iwt + 3) after solving for A.
The modulus of A, which is |A| = e(-t2) / sqrt(w2 + 9) gives the amplitude of the specific solution.
We must reduce the denominator of |A| with respect to w in order to determine the frequency at which the amplitude is greatest.
After differentiating and setting it to zero, we arrive at w = 0.971825315808 by applying the formula: -9 / 2(w2 + 9)(3/2) = 0.
Hence, for this specific solution, the frequency for which the highest amplitude is present is around 0.971825315808.
learn more about amplitude here:
https://brainly.com/question/8662436
#SPJ4
Select the correct location on the image.
The image shows the visible light spectrum received from a star. Which three parts of the spectrum show the presence of elements in the star’s atmosphere?
The visible light spectrum is the range of wavelengths the human eye can detect, ranging from 380 to 700 nanometers.
What are visible light examples?People think of the sun, light bulbs, candles, and flames when they think of light, but visible light originates from many sources and in many hues. Other visible light sources include television and computer displays, glow sticks, and pyrotechnics.
This is why this area of the electromagnetic spectrum is known as the visible spectrum or colour spectrum. It primarily comprises of seven colours: violet, blue, green, yellow, orange, and red.
Learn more about visible light spectrum
brainly.com/question/18704022
#SPJ1
Answer:
It is the three spots where there are lines. Between 400 and 500(the two lines), between 600 and 700(the two lines), and the one line between 700 and 800.
The Hubble Space Telescope orbits the Earth at an average altitude of 340 miles above the surface of the Earth. It completes one orbit in roughly 95 minutes. Assume that the orbit is circular and that the radius of the Earth is 3959 miles. 1. What fraction of a complete orbit does the telescope make in one hour? 2. Find the angle associated with the circular arc made by the telescope over one hour. 3. How fast is the telescope moving around the Earth in miles per hour?
1. In one hour, the telescope completes 60/95 = 0.63 of an orbit. Therefore, it makes approximately 63% of a complete orbit in one hour.
2. The angle associated with the circular arc made by the telescope over one hour is approximately 135.6 degrees.
To find the angle associated with the circular arc made by the telescope over one hour, we need to first find the length of the arc. The circumference of the orbit is:
2πr = 2π(3959 + 340) = 47408 miles
The distance traveled by the telescope in one hour is:
(1/95) x 60 minutes x 60 seconds = 2262.11 seconds
The length of the arc made by the telescope in one hour is therefore:
(2262.11/3600) x 47408 = 29806.31 miles
The angle associated with this arc can be found using the formula for the angle of a circular sector:
θ = (s/r) x (180/π)
where θ is the angle in degrees, s is the arc length, and r is the radius of the circle. Substituting in the values, we get:
θ = (29806.31/3959) x (180/π) ≈ 135.6 degrees
Therefore, the angle associated with the circular arc made by the telescope over one hour is approximately 135.6 degrees.
3. The speed of the telescope is:
47408/1.58 ≈ 29987 miles per hour (rounded to the nearest mile)
The speed of the telescope can be found by dividing the length of the orbit by the time taken to complete one orbit. The length of the orbit is the circumference of the circle, which we calculated in part 2. The time taken to complete one orbit is the orbital period, which is given as 95 minutes. Converting this to hours, we get:
95/60 = 1.58 hours
Therefore, the speed of the telescope is:
47408/1.58 ≈ 29987 miles per hour (rounded to the nearest mile)
To know more about telescope, visit:
https://brainly.com/question/556195
#SPJ1
To stretch a spring 5.00cm from its unstretched length, 19.0J of work must be done.1- what is the force constant of the spring ?2- What magnitude force is needed to stretch the spring 5.00cm from its unstretched length?3- How much work must be done to compress this spring 4.00 cm from its unstretched length?4-What force is needed to stretch it this distance?
1) The force constant of the spring is 0.76N/cm, 2) The magnitude force needed to stretch the spring 5.00cm from its unstretched length is 3.80N, 3) Work done to compress this spring 4.00 cm from its unstretched length is 12.48J, 4) Force needed to stretch it this distance is 3.04N.
1- To calculate the force constant of the spring, you need to use the equation W = 1/2 kx2, where W is the work done to stretch the spring, k is the force constant and x is the stretch distance. In this case, W = 19.0J and x = 5.00cm, so k = 19.0/25 = 0.76N/cm.
2- To calculate the magnitude of the force needed to stretch the spring 5.00cm from its unstretched length, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 5.00cm = 3.80N.
3- To calculate the work done to compress this spring 4.00 cm from its unstretched length, you need to use the equation W = 1/2 kx2, where W is the work done to compress the spring, k is the force constant and x is the compression distance. In this case, W = 1/2 x 0.76N/cm x (4.00 cm)2 = 12.48J.
4- To calculate the force needed to stretch the spring this distance, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 4.00cm = 3.04N.
To know more about spring, refer here:
https://brainly.com/question/14670501#
SPJ11#
The straight section of the line in figure 10 can be used to calculate the useful power output of the kettle explain how
Using the line's straight segment in figure 10, it is possible to determine the usable power output of the kettle.
The period that the kettle is heating the water up until it reaches boiling point is depicted by the straight segment of the line in figure 10. Both the power input to the kettle and the rate of energy transfer to the water remain constant throughout this period. Hence, by dividing the energy that was transmitted to the water during this period by the whole amount of time, the usable power output of the kettle can be determined. The straight section's slope, which reflects the rate of energy transfer, and horizontal distance, which indicates the elapsed time, may be used to calculate this. The energy transmitted is calculated by dividing the rate of energy transmission by the amount of time.
learn more about power here:
https://brainly.com/question/22285866
#SPJ4
A ball is thrown upwards and caught when it comes back down. In the presence of air resistance, the speed with which it is caught is:
(A) more than the speed it had when thrown upwards.
(B) the same as the speed it had when thrown upwards.
(C) less than the speed it had when thrown upwards.
A ball is thrown upwards and caught when it comes back down. In the presence of air resistance, the speed with which it is caught is C. less than the speed it had when thrown upwards.
When a ball is thrown upwards, it gains kinetic energy due to the force exerted by the thrower. Then, as it ascends, it loses kinetic energy and gains potential energy as it moves higher up. Finally, the ball comes to a stop, its kinetic energy becoming zero, and its potential energy reaches its maximum value. At the top, the ball begins to fall back to the ground.The air resistance opposes the motion of the ball, slowing it down as it travels upwards.
When the ball starts coming back down, the air resistance exerts an additional force, which slows down the ball and reduces its speed. As a result, the speed with which it is caught is less than the speed it had when thrown upwards. Hence, option (C) is correct.
Learn more about kinetic energy at:
https://brainly.com/question/22174271
#SPJ11
a wireshark trace of tcp traffic between hosts a and b indicated the following segments. a sent a segment of 0 bytes data payload to b with fin flag set, sequence number 1000 and ack number 500. later b sent a segment of 0 bytes data with fin flag set, sequence number 500 and ack number 1001. what is the state of the connection in host a before receiving the ack from b and after receiving the ack ?
The state of the connection in host A before receiving the ACK from B: Before receiving the ACK from B, the state of the connection in Host A was in the FIN WAIT 1 state. The state of the connection in host A after receiving the ACK: After receiving the ACK, the state of the connection in Host A is in the FIN WAIT 2 state.
In the 1st phase, the FIN segment is sent by the side which initiates the closing of the connection. The other side responds with an ACK that indicates that the FIN segment was received. The connection will stay in this state until a FIN segment is received by the other side or the timeout timer expires.
In the second phase of the termination process, the side receiving the FIN segment responds with an ACK. If it has any remaining data to send, it can do so in this phase, and the connection stays in FIN WAIT 2 state. If not, it moves to the TIME WAIT state, which is the final step in the termination process.
Therefore, the state of the connection in Host A is in the FIN WAIT 2 state after receiving the ACK.
What is TCP?
TCP is an abbreviation of Transmission Control Protocol. It is the protocol that serves as the foundation of the internet. It works to ensure that data sent over a network is delivered to the correct recipient. It is a connection-oriented protocol that means it needs to establish a connection before transmitting any data.
TCP guarantees that data sent over the internet reaches the intended recipient without data loss, duplication, or corruption.
To know more about FIN WAIT refer here: https://brainly.com/question/29922878#
#SPJ11
In which of the following cases does a car have a negative velocity and a positive acceleration? A car that is traveling in the ................. (A) -x direction at a constant 10 m/s. (B) - direction increasing in speed. (C) +x direction increasing in speed. (D) - direction decreasing in speed. (E) +x direction decreasing in speed.
In the case where the car is traveling in the -x direction and decreasing in speed, it has a negative velocity and a positive acceleration. Therefore, option D is the correct answer. In this case, the car is traveling in the - direction and decreasing in speed. Therefore, it has a negative velocity and a positive acceleration.
Let's discuss the given options one by one:
(A) In this case, the car is traveling in the -x direction at a constant speed. Therefore, it has a negative velocity and zero acceleration. This option is incorrect.
(B) In this case, the car is traveling in the - direction and increasing its speed. Therefore, it has a negative velocity and a positive acceleration. However, the given direction is not specified, and thus this option is not accurate.
(C) In this case, the car is traveling in the +x direction and increasing in speed. Therefore, it has a positive velocity and a positive acceleration. This option is incorrect.
(D) In this case, the car is traveling in the - direction and decreasing in speed. Therefore, it has a negative velocity and a positive acceleration. This option is correct.
(E) In this case, the car is traveling in the +x direction and decreasing in speed. Therefore, it has a positive velocity and a negative acceleration. This option is incorrect.
Therefore, Option D ( - direction decreasing in speed) is correct.
To know more about negative velocity and positive acceleration, refer here:
https://brainly.com/question/12015984#
#SPJ11
what is the potential difference across a capacitor after it has been discharging for a very long time?
The potential difference across a capacitor after it has been discharging for a very long time is 0 volts. This is because the capacitor is empty of charge, and thus has no potential difference between its two terminals.
A capacitor is a type of electrical component that stores energy in an electric field. The energy is stored in the form of electric charges on two conductive plates.
The plates are separated by an insulating material called a dielectric. The potential difference across a capacitor is proportional to the amount of charge stored on the plates.
What happens when a capacitor discharges?When a capacitor discharges, it loses the stored charge. This discharge occurs when the capacitor is connected to a circuit. The capacitor will then begin to discharge as the charges on the plates flow through the circuit.
The potential difference across the capacitor will decrease as the charges on the plates decrease.
The capacitor has been completely discharged and no longer has any potential difference.
Thus, the potential difference across a capacitor after it has been discharging for a very long time is zero.
Learn more about the potential difference here:
brainly.com/question/24142403
#SPJ11
what are two characteristics of net forces that are unbalanced
Unbalanced net forces that are not counterbalanced by opposing forces cause an object's motion to accelerate.
Unbalanced net forces have the following two properties: they alter an object's motion, and they are not counteracted by other forces. When an item is subjected to an imbalanced net force, the object accelerates in the direction of the net force. The amount of Acceleration is inversely proportional to the object's mass and directly proportional to the amount of net force. When the forces exerted on an item are not counterbalanced by opposing forces, an imbalanced net force develops. This indicates that a force has been generated as a result, changing the object's velocity. The comprehension of motion and forces in physics depends on these qualities.
learn more about Unbalanced net forces here:
https://brainly.com/question/29769471
#SPJ4
For this truss geometry:
|/\|/\|/\|/\|
Select one or more:
a. The bottom chords do not usually need the verticals, since the bottom chords are not subjected to bending loads and the bottom chords only go into compression under severe wind suction that overcomes the dead weight of the structure.
b. This is called a Modified Warren Truss.
c. The vertical webs help brace the top chord against buckling upward and downward.
d. The vertical webs help support parts of the top chord, thereby reducing the span, and associated bending stress, of the top chord under the uniform gravity force of the decking resting on the top chord of the truss.
e. The unbraced length for the bottom chords is twice as long as the unbraced length for the top chords.
The correct statements are as follows: Option (b), (c) and (d). A modified Warren Truss is a variant of the standard Warren truss, which is characterized by having verticals in every other panel.
A Warren truss is a type of truss having similar lengths for all of its members, and where the members are connected via a series of equilateral triangles that are arranged alternatively pointing upwards and downwards.
The vertical webs are useful for bracing the top chord against buckling upward and downward. The vertical webs support parts of the top chord, thereby reducing the span, and associated bending stress, of the top chord under the uniform gravity force of the decking resting on the top chord of the truss. Therefore the correct answers are options (a), (b), and (d).
Learn more about The vertical supports in bridge: brainly.com/question/21727232
#SPJ11
A car generator turns at 400 rpm when the engine is idling. Its 300-turn, 5.05 by 8.2 cm rectangular coil rotates in an adjustable magnetic field so that it can produce sufficient voltage even at low rpms. What is the field strength needed to produce a 24.0 V peak emf?
To produce a 24.0 V peak emf, the field strength needed for a car generator with a 300-turn, 5.05 by 8.2 cm rectangular coil rotating at 400 rpm when the engine is idling is 1.6 V/m.
What is an EMF?Аn electromotive force (EMF), often known аs voltаge, is аn electricаl force thаt drives current through аn electricаl circuit. EMF is а meаsure of the energy per unit chаrge thаt аn electricаl power source, such аs а bаttery or generаtor, gives to electrons trаveling through а circuit. The symbol for EMF is E.
The mаgnetic field strength cаn be determined using the formulа:
= BΦ / А×N
where B represents the field strength, Φ represents the flux, А represents the аreа of the loop, аnd N represents the number of turns. To obtаin the field strength, first, compute the flux, then use the formulа given аbove for B.
This is mathematically expressed as:
B = E / (NAB)
Here,
E = 24.0 V
N = 300 turns
A = 5.05 cm × 8.2 cm = 41.41 cm²
= 0.004141 m
2BΦ / A × N = E/ NAB
⇒ Φ / A = E/ BN2A2BΦ = EN2ABΦ
= (24.0V)×2(300)(0.004141 m²)Φ
= 7.26 x [tex]10^{-4}[/tex] Wb
B = Φ / ANB = Φ / ANB = 7.26 x [tex]10^{-4}[/tex] Wb / 300(0.004141 m²)
B = 0.0762 T
Therefore, to produce a 24.0 V peak emf, the field strength required is 0.0762 T.
For more information about an electromotive force (EMF) refers to the link: https://brainly.com/question/24182555
#SPJ11
The image shows flat sedimentary rock layers in the foreground and angled sedimentary rock layers in the background.
Flat sedimentary rock layers in the foreground, and angled sedimentary rock layers in the background.
According to the principle of original horizontality, what most likely happened to the rock layers in the background?
They cracked at an angle.
They were deposited at an angle.
They were deposited vertically and then shifted by a geologic event.
They were deposited horizontally and then shifted by a geologic event.
Answer:
They were deposited horizontally and then shifted by a geologic event.
Explanation:
how does the amount of strokes on a magnet affect the strength of it? Note- I'm NOT a high schooler. Simple answers please. I'm 11.
Answer:
how does the amount of strokes on a magnet affect the strength of it? Note- I'm NOT a high schooler. Simple answers please. I'm 11.
Explanation:
The amount of strokes on a magnet does not affect its strength. The strength of a magnet depends on the properties of the materials it is made of, such as the type of metal and the way it is magnetized. Once a magnet is magnetized, it will retain its strength unless it is exposed to high temperatures or strong magnetic fields that can demagnetize it.
One day, after pulling down your window shade, you notice that sunlight is passing through a pinhole in the shade and making a small patch of light on the far wall. Having recently studied optics in your physics class, you're not too surprised to see that the patch of light seems to be a circular diffraction pattern. It appears that the central maximum is about 3 cm across, and you estimate that the distance from the window shade to the wall is about 3 m .
Estimate the diameter of the pinhole (in mm).
The diameter of the pinhole is 0.1220 mm, through which the sunlight is passing through and making a small patch of light on the far wall.
Given information,
width of central maxima = 3 cm = 3×10⁻²m
size of the pinhole, a = 3 m
The average wavelength of sunlight, λ = 500 nm
The small bending of light as it travels around an object's edge is known as diffraction. The ratio of the wavelength of the light to the opening size determines how much bending occurs.
The relation between wavelength and aperture diameter is expressed as,
w = 2.44λa/D
where D is the diameter of the pinhole,
D = 2.44λa/w
D = 2.44×500×10⁻⁹×3/3×10⁻²
D = 0.1220×10⁻³m
D = 0.1220 mm
Hence, the diameter of the pinhole is 0.1220 mm.
To learn more about Diameter, here:
https://brainly.com/question/30354660
#SPJ12
help me
plss asap!!!
Answer:B
Explanation:The ray above makes a 90 degree angle. The ray below makes a 60 degree angle.
Which of the following characterizes the Kuiper belt?
A. It is a disk-like region between the outer planets and the Oort cloud.
B. It is up to 100,000 AU in size and spherical in shape.
C. It lies between the orbits of Mars and Jupiter.
D. It is a stable region just ahead of Jupiter in its orbit.
E. It is the region occupied by the Earth-crossing Apollo asteroids.
The Kuiper belt is a disk-like region between the outer planets and the Oort cloud. Thus, option A is correct
The Kuiper belt, also known as the trans-Neptunian region, is a doughnut-shaped region of space beyond Neptune that is home to an estimated 100,000 tiny, icy objects.
It is named after Dutch-American astronomer Gerard Kuiper, who first proposed its existence in 1951.
The belt ranges in distance from 30 to 50 astronomical units (AU) from the Sun, which is about 2.8 to 4.7 billion miles away.
The Kuiper belt objects are believed to be remnants from the formation of the solar system. They are small and mostly made up of ice and dust, similar to comets.
Some Kuiper belt objects, such as Pluto and Eris, are classified as dwarf planets.
Learn more about the Kuiper belt here:
https://brainly.com/question/3955749
#SPJ11
2. The shortest venomous snake, the spotted dwarf adder, has an average length of 20.0 cm. Suppose this snake hangs by its tail from a branch and holds a heavy prey with its jaws, simulating a pendulum with a length of 15.0 cm. How long will it take the snake to swing through one period?
Answer:
0.777 s
Explanation:
a boy coasts down a hill on a sled, reaching a level surface at the bottom with a speed of 7.2 m/s. if the coefficient of friction between the sled's runners and snow is 0.055 and the boy and sled together weigh 540 n, how far does the sled travel on the level surface before coming to rest?
The boy coasts down the hill on the sled and reaches a level surface with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and the snow is 0.055, and the boy and sled together weigh 540 N. To determine how far the sled will travel on the level surface before coming to rest, we need to calculate the distance using the formula Distance = (Speed x Time) - (1/2 x Acceleration x Time2). We can determine the time it takes for the sled to come to rest using the equation Speed = (Friction x Normal Force) / Mass. So, Speed = (0.055 x 540N) / 540N = 0.055 m/s. Time = 7.2/0.055 = 130.9 seconds. We can then calculate the distance as Distance = (7.2 x 130.9) - (1/2 x 0.055 x 130.92) = 927.9 m. Therefore, the sled will travel 927.9 m before coming to rest.
The boy and sled weigh 540 N. A boy coasts down a hill on a sled, reaching a level surface at the bottom with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and snow is 0.055. How far does the sled travel on the level surface before coming to rest?
The distance traveled by the sled on the level surface before coming to rest is 72.22 meters.
What is friction?
Friction is a force that opposes motion. It is the friction between the sled's runners and the snow that causes the sled to stop. The formula for frictional force is:f = μN where f is the frictional force, μ is the coefficient of friction, and N is the normal force, which is equal to the weight of the sled and boy since they are on a level surface. The normal force is given by: N = m*g where m is the mass of the sled and boy and g is the acceleration due to gravity, which is equal to 9.81 m/s^2.
How far does the sled travel on the level surface before coming to rest?
The sled will travel a certain distance, d, before it stops. The distance, d, is given by:d = (v^2 - u^2) / 2fwhere v is the final velocity, u is the initial velocity (which is 7.2 m/s), and f is the frictional force. The frictional force is f = μN = μmgSubstituting the given values:d = (7.2∧2 - 0∧2) / (2*0.055*540*9.81)d = 72.22 meters. Therefore, the sled will travel 72.22 meters on the level surface before coming to rest.
For more information follow this link: https://brainly.com/question/28224010
#SPJ11
the speed of an airplane is 275 mi/h relative to the air. the wind is blowing due north with a speed of 35 mi/h. in what direction should the airplane head in order to arrive at a point due west of its location? (round your answer to two decimal places.)
The airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.
To calculate this, first calculate the speed of the airplane relative to the ground.
The airplane's speed relative to the ground is:
Speed relative to ground = Speed relative to air + Wind Speed
= 275 mi/h + 35 mi/h
= 310 mi/h
Next, calculate the direction relative to north of the airplane's movement. The direction relative to north is calculated using the following formula:
Direction relative to north = tan-1(Opposite/Adjacent)
= tan-1(35 mi/h/310 mi/h)
= tan-1(0.1145)
= 298.93°
Therefore, the airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.
To know more about Direction please visit :
https://brainly.com/question/30337361
#SPJ11
plq1:how is acceleration data affected if the glider is more massive than expected, or the force applied to the glider is less than expected? explain your reasoning. plq2:how is the acceleration data affected if the force applied to the glider is greater than expected, or the glider is less massive than expected? explain your reasoning.
plq1. If the glider is more massive than expected, or the force applied to the glider is less than expected, the acceleration data is affected because the acceleration of the object is inversely proportional to the mass of the object. plq2. If the force applied to the glider is greater than expected, or the glider is less massive than expected, the acceleration data is affected because the acceleration of the object is directly proportional to the force applied to it
The acceleration of the object can be calculated using the following formula: F=maWhere F is the force applied to the object, m is the mass of the object, and a is the acceleration of the object. If the mass of the object is more than expected, the acceleration of the object decreases, resulting in a lower acceleration reading. Similarly, if the force applied to the object is less than expected, the acceleration of the object decreases, resulting in a lower acceleration reading.
If the force applied to the object is greater than expected, the acceleration of the object increases, resulting in a higher acceleration reading. Similarly, if the mass of the object is less than expected, the acceleration of the object increases, resulting in a higher acceleration reading.
Learn more about acceleration at:
https://brainly.com/question/28743430
#SPJ11
what is the resistance of the quantum point contact that allows three electron channels to connect the electrodes on each side?
The resistance of the quantum point contact that allows three electron channels to connect the electrodes on each side is determined by the number of electrons passing through it.
What is resistance?The capacity of a material to oppose the flow of electricity is referred to as resistance. When charged particles (such as electrons) move through a conductor, resistance causes some of the energy that would otherwise be converted into electricity to be transformed into heat instead. Resistance is a measure of how hard it is for electrons to move through a conductor. It's measured in ohms, and it's represented by the symbol Ω in electrical circuits.
As more electrons pass through the contact, the resistance increases. Therefore, the resistance of the quantum point contact varies depending on the number of electrons passing through it. In general, the resistance is proportional to the number of electrons passing through it, with each electron providing a certain amount of resistance.
The resistance of the quantum point contact that allows three electron channels to connect the electrodes on each side is 2π^2/h^2.The resistance of a quantum point contact with three electron channels is:R = 2π^2/h^2Where R is resistance, h is Planck's constant, and π is a mathematical constant. The resistance of a quantum point contact with three electron channels is approximately 6.5 kΩ.
Read more about the electron :
https://brainly.com/question/860094
#SPJ11
Why do we look for water when searching for extraterrestrial life?
Water is considered a crucial ingredient for the existence of life as we know it. It is a universal solvent that facilitates biochemical reactions, and its unique properties allow it to maintain a stable temperature range,
making it an ideal medium for the evolution of complex life forms.
One of the key requirements for life to exist is the presence of liquid water. Water is essential for the formation and maintenance of cell structures and for the transport of nutrients and waste products in living organisms. Therefore, when scientists search for extraterrestrial life, they focus on finding evidence of liquid water on other planets or moons.
In our solar system, Mars and several of Jupiter's moons, such as Europa and Ganymede, have been identified as potential locations for the presence of liquid water. Recent discoveries of underground oceans on some of these moons have increased the possibility of finding extraterrestrial life.
Additionally, the search for exoplanets, planets beyond our solar system, has become an important focus of astrobiology research. Astronomers use various techniques to identify exoplanets that may be within the habitable zone of their host star, where temperatures are just right for liquid water to exist.
In summary, water is a critical component for life as we know it, and its presence on other planets or moons greatly increases the chances of finding extraterrestrial life.
learn more about existence here
https://brainly.com/question/11081531
#SPJ4
what the auditory stimulus is transduced into electrical signals by the?
The auditory stimulus is transduced into electrical signals by the inner ear, specifically the hair cells of the cochlea.
What is the auditory stimulus?The hair cells are mechanoreceptors that convert sound waves into electrical signals that can be transmitted to the brain.The auditory stimulus is any sound that is heard by the ear. Examples of auditory stimuli include speech, music, environmental noise, or any other type of sound.
Other examples of auditory stimuli include animal noises, the sound of machinery, and the sound of the wind.
Learn more about auditory stimulus here:
https://brainly.com/question/937756
#SPJ1