Answer:
1st one is correct
The atom of the reactants unbound , rearrange, and then rebond to form the product
hope it helps
In a chemical reaction, the atoms of the reactants unbond, rearrange, and then rebond to form the products. Therefore, option A is correct.
What is chemical reaction ?Chemical reaction, the transformation of one or more chemicals the reactants into one or more distinct compounds, the products. Chemical elements or chemical compounds make up substances.
Combustion reaction, decomposition reaction, neutralization reaction, redox reaction, precipitation or double-displacement reaction, and synthesis reaction are some of the numerous types of reactions.
In a chemical reaction, bonds between molecules of the reactant are broken and new bonds between molecules of the product are established to create a new substance.
A chemical equation is nothing more than a mathematical statement that represents how reactants form products.
Thus, option A is correct.
To learn more about chemical reaction, follow the link;
https://brainly.com/question/3461108
#SPJ2
What are the
invisible lines
revealed by the
Iron fillings
surrounding a
magnet called?
Answer:
At each end of a magnet is a pole. These lines of flux (called a vector field) can not be seen by the naked eye, but they can be seen visually by using iron fillings sprinkled onto a sheet of paper or by using a small compass to trace them out.
hope it's help
#carryONlearningCall each of your flowers as water employee increase rate of growth
What is an equilibrium constant?
A. A constant relating the effects of activation energy and temperature on the reaction rate
B. The value of the rate of the forward and reverse reactions at equilibrium
C. The amount of energy required for the collision of two molecules to result in a reaction
D. The ratio of equilibrium concentrations of products to concentrations of reactants
Answer:
Explanation:well first you gotta animalize in your brain what you think would happen in this case D would explain what an equilibrium constant is
Answer: D
Explanation:
The ratio of equilibrium concentrations of products to concentrations of reactants
How many total atoms are in one molecule of Pb(C2H2O2)2?
A) 9
B) 14
C) 3
D) 15
Calculate the number of grams of sulfur in 4.52 mol of sulfur.
Which of the following examples best describes an effect of urbanization?
A More land is available in large cities to grow crops.
B Wildlife diversity increases due to more open spaces within the city.
C Emissions from motor vehicles increase smog in the air that can block radiation.
D The greater concentration of people in large cities reduces overall waste production and accumulation on Earth.
please help
Emissions from motor vehicles increase smog in the air which can block radiation. Hence, option C is correct.
What does it mean to live in an urban area?An urban area is a region surrounding a city. Most inhabitants of urban areas have nonagricultural jobs. Urban areas are very developed, meaning there is a density of human structures such as houses, commercial buildings, roads, bridges, and railways. "Urban area" can refer to towns, cities, and suburbs.
Emission from motor vehicles increases smog in the air that can block radiation, which makes sense because urbanization means more people in one area=lots of pollution.
Hence, option C is correct.
Learn more about urbanization here:
brainly.com/question/12007420
#SPJ2
True or false, the torch that is carried to the Olympic cauldron to be lit, is ignited by a match
Answer:
true
Explanation:
what happens to the boiling point of hydrocarbon compounds when the number of carbon atom increases
A. Decreases
B. Increases
C. Remains the same
D. None of these
I NEED YOUR ANSWER RN GUYSS PLEASEE
Difference between Solute and solvet
Answer:
When one substance dissolves into another, a solution is formed. The solute is the substance that is being dissolved, while the solvent is the dissolving medium. Solutions can be formed with many different types and forms of solutes and solvents.
Brainliest to right answer
Answer:
False
Explanation:
The outer core is a liquid and is made out of nickel and copper
If a reaction is endothermic,
1 point
More energy is released when the bonds in the products are formed than is used to
break the bonds in the reactants
The temperature increases
The same amount of energy is used to break the bonds of the reactants as is released
when the bonds in the products are formed
О O
It takes more energy to break the bonds of the reactants than is released when the
bonds in the products are formed
Answer: It takes more energy to break the bonds of the reactants than is released when the bonds in the products are formed
Explanation:
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat. Thus it takes more energy to break the bonds of the reactants than is released when the bonds in the products are formed
Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat. Thus More energy is released when the bonds in the products are formed than is used to break the bonds in the reactants
Which formula equation represents the burning of sulfur to produce sulfur dioxide?
Answer
The balanced reaction that describes the reaction between sulfur and oxygen to produce sulfur dioxide is expressed S(s) + O2 (g) = SO2 (g). In many manufacturing plants, sulfur dioxide is furhter reacted to oxygen to form sulfur trioxide then added with water to produce sulfuric acid.
Explanation: The balanced reaction that describes the reaction between sulfur and oxygen to produce sulfur dioxide is expressed S(s) + O2 (g) = SO2 (g).
Answer:
The balanced reaction that describes the reaction between sulfur and oxygen to produce sulfur dioxide is expressed S(s) + O2 (g) = SO2 (g). In many manufacturing plants, sulfur dioxide is further reacted to oxygen to form sulfur trioxide then added with water to produce sulfuric acid.
True or false The difference between solids and liquids is that solids have definite shape and volume, while liquids have no define volume
Answer:
False
Explanation:
Answer:
true! :) hope it helps
To investigate the effect of salt water on a cell, a researcher places one cell sample in freshwater and a second cell sample in salt water. After six hours, the researcher observes and sketches the two cells as shown. What change in the cells occurred during the six hours the cells remained undisturbed? A.Osmosis occurred in the salt water cell sample because the water from inside the cell moved out of the cell to a lower concentration, causing the cell to shrink. B.Osmosis occurred in the freshwater cell sample because the water from outside the cell moved into the cell to a higher concentration, causing the cell to grow. C.Osmosis occurred in the salt water cell sample because the salt from outside the cell moved into the cell to a lower concentration, causing the cell to shrink. D.Osmosis occurred in the freshwater cell sample because the salt from inside the cell moved out of the cell to a higher concentration, causing the cell to grow.
Answer:
MARK ME BRAINLIEST
Explanation:
MARK ME BRAINLIEST
Solid aluminum metal reacts with chlorine gas to produce aluminum chloride crystals. How many grams of
aluminum chloride will be produced if the reaction begins with 135.0 g Al and 75.0 g chlorine gas? Write the balanced equation. Determine the limiting reactant and determine how much excess reactant will be left over. show your work.
56.8g of aluminum chloride will be produced if the reaction begins with 135.0 g Al and 75.0 g chlorine gas.
What is mass?A body's mass is an inherent quality. Prior to the discovery of a atom or particle physics, it was widely considered to be tied to the amount of matter inside a physical body. It was discovered that, despite having the very same quantity of matter in theory, different atoms and elementary particles have varied masses.
There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to acceleration in the presence of a net force can be measured experimentally as mass. The gravitational pull an object has on other bodies is also influenced by its mass.
2 Al + 3 Cl[tex]_2[/tex] → 2 Al C l[tex]_3[/tex]
mole of Al = 135.0/ 26=5.19mol
mole of Cl[tex]_2[/tex] = 75.0/ 35 =2.14 mol
mass of aluminum chloride = 56.8g
Limiting reagent = Al
excess reactant = Cl[tex]_2[/tex]
Therefore, 56.8g of aluminum chloride will be produced if the reaction begins with 135.0 g Al and 75.0 g chlorine gas.
To know more about mass, here:
https://brainly.com/question/28704035
#SPJ2
How do you figure out the final temperature or the initial temperature in calorimetry.
Single-celled organisms need a microscope to be seen...
O True
O False
Answer:
True
Explanation:
Microscope is an instrument which is used to observe small objects. There are many types of microscope with a different magnitude.
A velocity-time graph shows how what changes over time?
Answer:
A velocity-time graph shows how velocity changes over time. The sprinter's velocity increases for the first 4 seconds of the race, it remains constant for the next 3 seconds, and it decreases during the last 3 seconds after she crosses the finish line.
Summarize how a dinosaur can become a fossil.
b. What useful functions do oxidation numbers
serve?
20.
b. How many molecules are in 1 mole of
molecules?
c. What is the name given to the number of
molecules in 1 mole?
21. a. What is the molar mass of an element?
b. Write the molar mass rounded to two
decimal places of carbon, neon, iron and
uranium.
Explanation:
b. What useful functions do oxidation numbers serve?
It is used to show oxidation and reduction (loss and gain of electrons)
b. How many molecules are in 1 mole of molecules?
1 mole = 6.022 * 10^23 molecules
c. What is the name given to the number of molecules in 1 mole?
Avogadro's Number of molecules
21. a. What is the molar mass of an element?
This is the mass of an element divided by the number of moles.
Molar mass = Mass / Number of moles
b. Write the molar mass rounded to two decimal places of carbon, neon, iron and uranium.
amu = Atomic Mass Unit
Carbon = 12.01 amu
Neon = 20.18 amu
Iron = 55.85 amu
Uranium = 238.03 amu
(Help would be greatly appreciated, chemistry is not my strong suit) How many moles of NaCl are present in a solution with a molarity of 8.59M and 125mL of a solution?
1. 1.07g
2. 62.7mol
3. 1.07mol
4. 62.7g
Molarity is a unit of concentration defined as the number of moles of solute (the substance being dissolved) per volume of solution (the solvent in which all the solute is dissolved). Mathematically, molarity is expressed as
[tex]M = \frac{\text{ mol solute}}{\text{ L solution}}[/tex].
In this question, we are given the molarity and the volume of a solution of NaCl. We can use this information to calculate the number of moles of NaCl present in the solution. Rearranging the equation to solve for moles of solute, we multiply the molarity by the volume of the solution (the units for volume must be in liters, so 125 mL is expressed as the equivalent 0.125 L):
[tex](8.59 \text{ M})(0.125 \text{ L}) = 1.07 \text{ moles of NaCl}.[/tex]
The question asks for the number of moles of NaCl in this solution, so number 3 would be correct.
Which gases in the following list exist as separate atoms: hydrogen, helium, nitrogen, oxygen, neon.
Select one:
a. Hydrogen and helium
b. Helium and nitrogen
c. Helium and neon
d. Oxygen and nitrogen
helium and neon ( answer C)
Help me pretty please
Answer:
C
Explanation:
Answer:
I think ur answer would be C.)
Explanation:
hope this helps
How to convert celcius to Kelvin?
Answer:
temperature
Explanation:
The mass of a single gold atom is 3.27X10^-22 grams. How many gold Adams with there be in 57.8 mg of gold.
Answer:
18 * 10^19 atoms
Explanation:
We must first convert 57.8 mg to grams.
If 1000 mg = 1g
57.8 mg = 57.8/1000 = 57.8 * 10^-3 g
Now;
If 1 gold atom has a mass of 3.27X10^-22 grams
x gold atoms have a mass of 57.8 * 10^-3 g
x = 57.8 * 10^-3 g/3.27X10^-22 g
x = 18 * 10^19 atoms
The total mass of the __________________ and __________________ in an atom is the atomic mass.
Fill in the blanks Plzz
Answer:
protons, neutrons
Explanation:
There are three subatomic particles in all atoms: protons, neutrons and electrons. Of these three, only protons and neutrons are considered to have enough mass to contribute to overall atomic mass of the element.
each side of a square is 8 by 10 metre find the area of the square
Answer and Explanation:
I believe the answer is 8
Calculate the number of moles that are in 2.0 L of a 0.75 M solutions of NaCl
Answer:
1.5
Explanation:
0.75M=Moles/2L
What does a TRAAP test stand for
Answer:
TIMELINESS, RELEVANCE, AUTHORITY, ACCURACY and PURPOSE.
Explanation:
hope it helps!
Answer: TRAAP stands for Timeliness, Relevance, Authority, Accuracy and Purpose.
Explanation:
which substance will evaporate first???????????????????
Answer:
I think it would be a liquid.
Explanation:
If the temperature hits a certain point, it will turn to ice. If the ice gets exposed to heat, it will melt and return back to it's natural form, a lqiuid. If the liquid is exposed to enough heat, it will evaporate. Not sure if this is right, but I tried my best!