In a highly basic solution, pH = 13, the dominant form of glycine is: NH2—CH3+—COO-.

Answers

Answer 1

The predominant form of glycine in a strongly basic solution with a pH of 13 is NH2—CH3+—COO-. For amino acids with neutral R groups, the population of amino acids in solution will have a net positive charge at any pH below the amino acid's pI.

Are there D and L forms of glycine?

A flexible addition that prevents protein aggregation during refolding, heat treatment, and crystallization is glycine amide (GlyAd), an usually amidated amino acid.

Since it is the only amino acid without a chiral carbon atom, glycine is the simplest and smallest and has a hydrogen atom as a side chain. As a result, it does not produce stereoisomers and does not have the L or D configurations found in other amino acids.

learn more about glycine

https://brainly.com/question/14886525

#SPJ4


Related Questions

True or False Polyunsaturated fatty acids are precursors of other molecules.

Answers

Dietary fats include polyunsaturated fat. Along with monounsaturated fat, it is one of the good fats. Foods like salmon, vegetable oils, and other plant- and animal-based foods include polyunsaturated fat. They act as precursors of other molecules. The given statement is true.

Precursors of eicosanoids with hormone-like properties including prostaglandins, leukotrienes, and thromboxanes are polyunsaturated fatty acids (PUFA).

Dihomo-linolenic acid (DGLA), arachidonic acid (AA), and eicosapentaenoic acid (EPA) are the three precursors that prostaglandins can be formed from. Depending on the precursor, series 1, 2, or 3 prostanoids is produced.

To know more about Polyunsaturated fatty acids, visit;

https://brainly.com/question/12409149

#SPJ1



Circuit A has a resistance of 7.5 ohms, and circuit B has a resistance of 5 ohms. Which statement about the circuits must be correct?


If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is equal to the current in circuit B


If the current in circuit A is equal to the current in circuit B, then the voltage in circuit A is less than the

voltage in circuit B


If the current in circuit A is less than the current in circuit B, then the voltage in circuit A is less than the

voltage in circuit B


If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the

current in circuit B

Answers

Answer:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Explanation:

To know the the correct answer to the question, do the following:

Case 1: Let the circuit A and B have equal voltage say 24 V.

For Circuit A:

Voltage (V) = 24 V

Resistance (R) = 7.5 ohms

Current (I) =?

V = IR

24 = I × 7.5

Divide both side by 7.5

I = 24 / 7.5

I = 3.2 A

For Circuit B:

Voltage (V) = 24 V

Resistance (R) = 5 ohms

Current (I) =?

V = IR

24 = I × 5

Divide both side by 5

I = 24 / 5

I = 4.8 A

Thus for the same voltage, current in circuit A is less than the current in B.

Case 2: Let circuit A and B have equal current say 2 A

For circuit A:

Current (I) = 2 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 2 × 7.5

V = 15 V

For Circuit B:

Current (I) = 2 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 2 × 5

V = 10 V

Thus, for the same current, the voltage in circuit A is greater than the voltage in B

Case 3: Let circuit A have a current of 4 A and circuit B have a current of 5 A

For circuit A:

Current (I) = 4 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 4 × 7.5

V = 30 V

For circuit B:

Current (I) = 5 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 5 × 5

V = 25 V

Thus, when the current in circuit A is less than the current in circuit B, the voltage in circuit A is greater than the voltage in circuit B.

From the illustrations above and the options given in the question, the current answer is:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Which is the formula for nitrogen trihydride? NH3 N3H 3NH N3H3

NH3
N3H
3NH
N3H3

Answers

Answer:

NH3

Explanation:

The "tri" attached to the trihydride means 3. So your hydrogen is going to have 3 atoms.

Answer:

All Answers only for the elite; Nomenclature of Covalent Compounds Quiz

You're Welcome :)

Explanation:

A-hydrochloric acid

B-sulfuric acid

C-dinitrogen pentoxide

C- IBr3

A- carbon dioxide

B- Start the name with hydro-.

B- H3BO3

C-sulfur trioxide

A- NH3

B- The chemical name ends with “hydroxide.”

Read each question carefully, and answer yes or no to each one. At the end of each section, follow the directions to score your answers (pay close attention as the directions for scoring may change for each section). After you complete the entire assessment, total the points from all seven sections. This will give you a total health score. The higher the score, the more healthy your lifestyle. If you feel you have a low score, look back through the assessment and identify areas where you can change your unhealthy habits, and explain what changes you would make and why. Write your assessment in the essay box below.

Section 1: Physical Fitness
Do you exercise or play a sport for at least 30 minutes three or more times a week?
Do you stretching before and after exercising?
Do you warm up before exercising and cool down afterwards?
Do you think that you are at a healthy weight?
Are you mostly happy with the way your body looks and feels?
Do you think you have enough energy?
Give yourself one point for each No response and two points for each Yes response. Section score: ____

Section 2: Family History
Do you have a family member who:

has high blood pressure?
has diabetes?
has heart disease?
has cancer?
is extremely overweight?
Give yourself one point for each Yes response and two points for each No response. Section score: ____

Section 3: Hygiene and Medical Care
Do you floss your teeth every day?
Do you brush your teeth at least twice a day?
Do you visit the dentist at least once a year?
Do you use sunscreen?
Do you know basic first aid?
Are all your immunizations current?
Do you get your vision and hearing checked each year?
Do you see the doctor for a check-up once each year?
Do you feel you get enough sleep at night?
Do you know the warning signs for cancer?
Give yourself one point for each No response and two points for each Yes response. Section score: ____

Section 4: Nutrition
Do you eat a lot of red meat or eggs?
Do you add salt to your food?
Do you add sugar to your food?
Do you eat a lot of high-fat or high-sugar foods?
Do you add butter or cheese to your food?
Do you choose fried foods more often than baked or broiled foods?
Do you drink caffeinated drinks, such as coffee or sodas?
Do you skip meals?
Give yourself one point for each Yes response and two points for each No response. Section score: ____

Section 5: Drug Use
Do you smoke or chew tobacco?
Do you drink alcohol?
Have you ever used marijuana or other illegal drugs?
Have you ever abused a prescription drug?
Give yourself zero points for each Yes response and two points for each No response. Section score: ____

Section 6: Safety
Have you ever ridden with drivers who were under the influence of alcohol or drugs?
Have you ever ridden with drivers who speed or disobey traffic laws?
Do you ever forget to wear your seat belt?
Do you ever forget to wear a helmet when riding a bike or skateboarding?
Do you ever play with matches or hazardous materials?
Is there a gun in your house?
Give yourself zero points for each Yes response and two points for each No response. Section score: ____

Section 7: Emotional and Social Health
Do you have hobbies or activities that you enjoy?
Do you give your best effort when doing your work?
Do you find it easy to laugh?
Do you express anger in an appropriate way?
Do you easily fall asleep at night?
Do you share personal problems with someone you trust?
Do you feel well liked by others?
Do you have someone you can turn to if you need help?
Are your family members and close friends in good health?
Are you generally happy?
Give yourself one point for each No response and two points for each Yes response. Section score: ____

Total Health Score: ____

Answers

Answer:

Yes

Yes

Yes

All yes

Explanation:

Which type of mutation has no effect on protein function?

Answers

A silent mutation is a type of mutation that has no effect on protein function. This is because the mutation does not change the amino acid sequence of the protein.

What is silent mutations ?

Silent mutations can happen when a single base pair in the DNA is altered without changing the amino acid that the codon is meant to encode. For instance, a silent mutation could turn the initial G in the codon for the amino acid alanine from GCG to A, creating the codon GCA. The function of the protein is unaffected since the codon GCA still codes for the amino acid alanine.

The most frequent sort of mutation is a silent mutation, which can be brought on by a number of things, including mistakes in DNA replication, contact with environmental mutagens, and random chance. Silent mutations typically have no detrimental effects on the organism.

Learn more about silent mutations here : brainly.com/question/30280461

#SPJ1

Calculate the pH when 90.0 mL of 0.200 M HBr is mixed with 30.0 mL of 0.400 M CH₃NH₂ (Kb = 4.4 × 10⁻⁴).

Answers

The pH of the solution is 10.82.

To solve this problem, we need to determine the concentration of the hydronium ion ([tex]H_3O^+[/tex]) in the solution. This can be done using the following steps:

Write the balanced chemical equation for the reaction between HBr and CH₃NH₂.

HBr + CH₃NH₂ → CH₃NH₃⁺ + Br⁻

Write the expression for the base dissociation constant (Kb) for CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

Calculate the concentration of hydroxide ions (OH⁻) in the solution using the Kb value and the concentration of CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

4.4 × 10⁻⁴ = x² / (0.400 M)

x = 6.63 × 10⁻³ M

[OH⁻] = 6.63 × 10⁻³ M

Calculate the concentration of [tex]H_3O^+[/tex] using the equilibrium constant for the reaction between HBr and [tex]H_2O[/tex].

[tex]HBr + H_2O = H_3O^+ + Br^-[/tex]

[tex]Kw = [H_3O^+][OH^-] = 1.0 * 10^{-14}\\[H_3O^+] = Kw/[OH-] = 1.51 * 10^{-11}[/tex]

Calculate the pH using the concentration of [tex]H_3O^+[/tex].

[tex]pH = -log[H_3O^+]\\pH = -log(1.51 * 10^{-11})[/tex]

pH = 10.82

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Question 6
How many moles of carbon is found in 98.22g of carbon?

Answers

Answer:8.18 moles C

Explanation:

98.22g x 1 mole C/ 12.011g = 8.18 moles C

6 Give five is appliedays in which these heat transfer in our everyday life​

Answers

Heat transfer plays a crucial role in various aspects of our everyday lives. Here are five examples of how heat transfer occurs in our daily activities:

Cooking; Cooling; Central Heating; Ironing; Showering

Cooking: Heat is transferred from a stove or an oven to the cooking utensils and food. Conduction occurs when the heat is transferred through direct contact between the heat source and the cooking pan. Convection takes place when hot air circulates around the food, evenly cooking it. Radiation is also involved when heat is emitted by the heating elements and absorbed by the food.

Cooling: Heat transfer is essential in cooling processes, such as using refrigerators or air conditioning systems. In refrigeration, heat is transferred from the interior of the refrigerator to the outside environment through the process of convection and radiation. In air conditioning, heat is absorbed from the indoor air and released outside, again utilizing convection and radiation.

Central Heating: Many homes and buildings use central heating systems to warm up indoor spaces. Heat is produced by a furnace or boiler and then distributed through convection and radiation. Radiators or air vents release the heated air, raising the temperature in the rooms.

Ironing: Ironing clothes involves the transfer of heat to remove wrinkles. The iron's heating element conducts heat to the metal plate, which comes into direct contact with the fabric. Conduction transfers heat from the iron to the clothes, causing the fibers to relax and remove the wrinkles.

Showering: When taking a hot shower, heat transfer is involved in multiple ways. Firstly, conduction occurs as the hot water comes into contact with your skin, transferring heat. Secondly, convection takes place as the warm water surrounds your body, creating a warm sensation. Lastly, radiation occurs as the hot water radiates heat, making the shower enclosure feel warm.

These are just a few examples, but heat transfer is involved in numerous other activities, from using hairdryers to heating water for tea. Understanding heat transfer is crucial for designing efficient systems and ensuring our comfort and safety in everyday life.

For more question on Heat click on

https://brainly.com/question/30738335

#SPJ11

Arsenate (AsO43-) is structurally and chemically similar to inorganic phosphate (PO43-), and many enzymes that act on phosphate will also use arsenate as a substrate if it is available. However, unlike phosphates, organic compounds of arsenate are kinetically unstable. For example, acyl phosphates (such as 1,3-bisphosphoglycerate) require an enzyme to catalyze phosphate hydrolysis on a biologically relevant timescale, but acyl arsenates hydrolyze almost instantaneously in water without an enzyme.
a) Predict the effect on the net reaction catalyzed by glyceraldehyde 3-phosphate dehydrogenase if phosphate were replaced by arsenate.
b) Write a balanced overall equation for the conversion of glucose to pyruvate in the presence of ATP, ADP, NAD+, and arsenate.
c) Arsenate is extremely toxic to most organisms. Based on your answers above, explain why.

Answers

Answer:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is used mostly regarded  as poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Explanation:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is mostly regarded as  poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Those structures that are similar in all behavior is called homologous structure.

The answer of the following question is as follows:-

The effect on the net reaction catalyzed by glyceraldehyde is that  the 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase ) There will be no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived Arsenate is very toxic to most organisms and it is used mostly regarded as a poison during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of a cell.

For more information, refer to the link:-

https://brainly.com/question/15804584

Which of the following compounds contain sterogenic centres (stereocentres)?

Answers

The compound that contains sterogenic centre is the 1,3,4-trichloropentane. That is option F.

What are sterogenic centres of a compound?

Sterogenic centers are found in compounds where a carbon atom share four bonds to the carbon atom with each to different elements or functional groups.

From the list of example given above, the carbon atom of which Ch the second chloride is attached to is sharing bonds with carbon, hydrogen, chloride and another carbon.

Learn more about atom here:

https://brainly.com/question/20994647

#SPJ1

ontrast the mechanisms of the following two reactions, the dehydration and condensation of ethanol. Part A The first step of dehydration of ethanol is _______. The first step of condensation of ethanol is ________. The first step of dehydration of ethanol is _______. The first step of condensation of ethanol is ________. protonation, deprotonation protonation, protonation deprotonation, protonation deprotonation, deprotonation Request Answer Part B Dehydration of ethanol is __________, condensation of ethanol is __________. Dehydration of ethanol is __________, condensation of ethanol is __________. a substitution, an elimination an elimination, a substitution a substitution, a substitution an elimination, an elimination Request Answer

Answers

Answer:

Part A: Protonation, Protonation

Part B: An elimination, A substitution

Explanation:

The dehydration ethanol and the condensation of ethanol all begin from the protonation of ethanol. This is because, water is a good leaving group. Thus, the protonation of the -OH moiety of the molecule is the first step in each mechanism.

The dehydration of ethanol is an elimination reaction because it involves the loss of H-O-H from the ethanol molecule while the condensation of ethanol is an substitution reaction because the -OH moiety is replaced by -OCH2CH3.

The engineering process defines the steps engineers take to create
technology. Which of these describes these steps in the correct order?
A. Identifying a need, researching the background of that need,
making a plan to meet the need, doing the work, evaluating the
results, looking for improvements
B. Identifying a problem, making a solution, testing the solution,
mass production, making improvements
C. Identifying a problem, testing various solutions, researching side
effects of each solution, choosing a solution, looking to improve
the solution, planning how to test the solution
OD. Identifying a problem, brainstorming solutions, researching the
background of each solution, testing solutions, choosing a
solution, production, making future improvements

Answers

The steps in the engineering process in order is D. Identifying a problem, brainstorming solutions, researching the background of each solution, testing solutions, choosing a solution, production, making future improvements.

What are the steps of the engineering process ?

The initial step involves recognizing the predicament that requires resolution. One may achieve this through collaborating with fellow engineers, consulting customers, or conducting studies. After recognizing the issue at hand, the subsequent course of action involves generating ideas or solutions to address it. One way to achieve this is to generate a large number of ideas.

The subsequent phase necessitates the experimentation of potential answers. To achieve this, one must take into account both the outcomes of the assessments and the advantages and disadvantages associated with every proposed resolution. The subsequent action entails generating the resolution. One way to accomplish this is to create a prototype, while another is to manufacture the solution in large quantities. The last stage involves enhancing forthcoming developments.

Find out more on the engineering process at https://brainly.com/question/19369851

#SPJ1

Calculate the pOH if the [OH-] concentration is 5.9 x 10_, M? Is the solution ACIDIC, BASIC, or NEUTRAL?

Answers

If the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77 and the solution is basic.

To calculate the pOH of a solution, we can use the formula:

pOH = -log[OH-]

Given that the [OH-] concentration is 5.9 x 10^(-M), we can substitute this value into the formula:

pOH = -log(5.9 x 10^(-M))

Calculating this expression, we find:

pOH = -log(5.9 x 10^(-M))

pOH ≈ -log(5.9) + (-log(10^(-M)))

Since log(10^(-M)) is equal to -M, the equation simplifies to:

pOH ≈ -log(5.9) - M

Now, we need the value of M (the exponent) to calculate the exact pOH value. It appears that the value of M is missing in the given information. However, assuming M is a positive value, we can continue the calculation.

If we consider M = 6, for instance, the equation becomes:

pOH ≈ -log(5.9) - 6

Now, we can evaluate the expression:

pOH ≈ 1.23 - 6

pOH ≈ -4.77

Therefore, if the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77.

To determine whether the solution is acidic, basic, or neutral, we can use the relationship between pH and pOH. The sum of the pH and pOH of a solution at 25°C is always equal to 14.

Since pOH = -4.77, the pH would be:

pH = 14 - pOH

pH ≈ 14 - (-4.77)

pH ≈ 18.77

A solution with a pH above 7 is considered basic. In this case, the calculated pH is greater than 7. Therefore, the solution is basic.

for more questions on pOH
https://brainly.com/question/1420583
#SPJ11

What is the energy of light with a wavelength of 589 nm? (The speed of light
in a vacuum is 3.00 × 108 m/s, and Planck's constant is 6.626 × 10-34 J.s.)

Answers

The energy of light with a wavelength of 589 nm is approximately 3.36 × 10^(-19) Joules.

To calculate the energy of light, we can use the equation E = hc/λ, where E represents the energy, h is Planck's constant (6.626 × 10^(-34) J·s), c is the speed of light in a vacuum (3.00 × 10^8 m/s), and λ is the wavelength of light.

Given that the wavelength is 589 nm (which is equivalent to 589 × 10^(-9) m), we can substitute the values into the equation:

E = (6.626 × 10^(-34) J·s × 3.00 × 10^8 m/s) / (589 × 10^(-9) m)

Simplifying the equation, we get:

E = (1.9778 × 10^(-25) J·m) / (5.89 × 10^(-7) m)

Dividing these values, we find:

E ≈ 3.36 × 10^(-19) J

For more such questions on energy

https://brainly.com/question/30128198

#SPJ11

Please help for brainliest

Curious Carl's chemistry teacher asked him to make a sugar solution. Carl dissolved 400 grams of sucrose (C12H22O11 , molar mass 342.3mol) in 1.00 L of water.

If molarity = moles/liter, what is the molarity of Carl's sugar solution?

Question 31 options:

1.2 M


0.86 M


0.40 M


1.0 M

Answers

Answer:

The molarity of Carl's sugar solution can be calculated using the formula:

Molarity = moles of solute / liters of solution

First, we need to determine the number of moles of sucrose in the solution. We can do this using the formula:

moles = mass / molar mass

The mass of sucrose is 400 grams, and the molar mass is 342.3 g/mol:

moles = 400 g / 342.3 g/mol

moles = 1.167 mol

Now we can calculate the molarity by dividing the moles by the liters of solution (which is 1.00 L):

Molarity = 1.167 mol / 1.00 L

Molarity = 1.2 M

Therefore, the molarity of Carl's sugar solution is 1.2 M. Answer: 1.2 M.

Explanation:

A sample of argon has a volume of 1.20 L at STP. If the temperature is increased to 28.0 °C and the pressure is lowered to 0.800 atm, what will the new volume be, in L?

Answers

The new volume of the sample of argon, in L, will be 1.43 L.

At STP (Standard Temperature and Pressure), the temperature is 0 °C (273 K) and the pressure is 1 atm. Therefore, the initial conditions can be expressed as:

T1 = 273 K

P1 = 1 atm

V1 = 1.20 L

To find the new volume, we can use the combined gas law:

(P1V1) / T1 = (P2V2) / T2

We can rearrange this equation to solve for V2:

V2 = (P1V1T2) / (P2T1)

Substituting the given values, we get:

V2 = (1 atm x 1.20 L x 301 K) / (0.800 atm x 273 K)

V2 = 1.43 L

At a temperature of 28.0 °C and a pressure of 0.800 atm, the new volume of the argon sample is 1.43 L.

To know more about the Pressure, here

https://brainly.com/question/18698171

#SPJ1

URGENT HELP


Which of the following experimental plans will test the effects of pressure on a reaction with gases and what is
the expected result?
A Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.
B Keep pressure constant and increase the temperature of the reaction; reaction rate will decrease.
C Keep temperature constant and decrease the pressure of the reaction; reaction rate will increase.
D Keep pressure constant and decrease the temperature of the reaction; reaction rate will increase.

Answers

Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

option A.

What is Boyle's law?

Boyle's law states that pressure of a given mass of a gas is directly proportional to its volume provided, temperature of the gas is kept constant.

Le Chatelier's Principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.

So the experimental plans that will test the effects of pressure on a reaction with gases and its expected result is keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

Thus, option A is the correct answer.

Learn more about pressure of reaction here: https://brainly.com/question/30917518

#SPJ1

The volume of a sample of gas is 2.00 L when the temperature is 111C. While
the pressure remains constant the temperature is changed to a new value
which causes the volume to become 3.00L What was the temperature changed
to?

Answers

Answer:

Explanation:

Charles Law

V1/T1 = V2/T2

T2= T1V2/V1  = 384.15 X 3/2=576.23K or 303.08 Celsius

Compare and contrast the use of fossil fuels and wind energy. (1 point) Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does not pollute the atmosphere, while using Earth's wind does. O Both fossil fuels and wind energy contribute negatively to climate change. However, mining for fossil fuels is much more damaging to the environment than using wind power. Both fossil fuels and wind energy can be used to produce electricity. However, wind energy does not pollute the atmosphere, while burning fossil fuels does. Both fossil fuels and wind energy contribute negatively to climate change. However, using Earth's wind for energy is much more damaging to the environment than using fossil fuels.​

Answers

Answer:

The Answer will be provided below, please pay attention in class next time so that you don't have to be in a hurry like you are in now.

Explanation: The correct option is:

Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does pollute the atmosphere, while using Earth's wind does not. Both fossil fuels and wind energy contribute to climate change, but the use of fossil fuels is much more damaging to the environment than the use of wind power.

Fossil fuels are non-renewable sources of energy that are formed over millions of years by the decomposition of organic matter. They release harmful greenhouse gases when burned, contributing to climate change. In contrast, wind energy is a renewable source of energy that uses turbines to harvest the power of wind. Wind energy does not produce any emissions, making it an environmentally friendly alternative to fossil fuels. While wind turbines can have some impacts on wildlife and habitats, the impact is much less severe than the effects of fossil fuel extraction and burning.

Added Part: Fossil fuels are non-renewable sources of energy that are derived from the remains of plants and animals that died millions of years ago. These sources include coal, oil, and natural gas. Wind energy, on the other hand, is a renewable source of energy that is generated by the kinetic energy of wind.

Here are some comparisons between fossil fuels and wind energy:

Environmental Impact: Fossil fuels have a significant negative impact on the environment. Burning fossil fuels produces greenhouse gases that contribute to climate change. The extraction of fossil fuels also has negative impacts on the air, water, and soil. Wind energy, however, has a very small environmental footprint. Wind turbines do not produce any emissions and do not require any water to generate electricity.

Energy Availability: Fossil fuels are abundant and have been the primary source of energy for decades. On the other hand, wind energy is a relatively new source of energy and the technology is still developing. However, the availability of wind energy is significant, as wind is a renewable source that is constantly available.

Sustainability: Fossil fuels are non-renewable, which means they will eventually run out. As the demand for energy continues to increase, the availability of fossil fuels will decrease. Wind energy is a renewable source of energy that will never run out.

Here are some pros and cons of both fossil fuels and wind energy:

Fossil Fuels:

Pros:

Reliable source of energy

High energy density

Large global infrastructure

Cons:

Non-renewable source of energy

Significant environmental impact

Price instability

Wind Energy:

Pros:

Renewable source of energy

Small environmental footprint

Low operating costs

Cons:

High initial costs for building wind turbines

Wind is an inconsistent source of energy

Can create noise pollution for surrounding communities

Which term names an icy object that orbits the sun and has a tail?
meteorite
comet
meteor
asteroid

Answers

Answer:

Comets are small, icy objects that have very elliptical orbits. When they are close to the Sun, they form comas and tails, which glow and make the comet more visible.

Explanation:

Hope This Helps!!

(brainliest please, if possible)

Answer:

comet's

Explanation:

what the other user said

Which statement correctly describes atoms? *
-Atoms combine to make all the substances on Earth.
-Atoms of all substances have the same chemical properties.
-Atoms are easily destroyed when matter is cooled or heated.
-Atoms come in different sizes, but most are visible using a simple hand lens.

Answers

Answer: Atoms combine to make all the substances on Earth.

Explanation:

Atom is a smallest entity of any matter. The atoms of different elements combine together in order to form new substances. The atoms have electrons, neutrons, as well as protons. The atoms are combined by the chemical bond. When two or more atoms combine they form a molecule. The molecules combine to form compound. Atoms cannot be broken into sub parts. The two atoms of hydrogen and one of oxygen forms water which is an essential liquid on planet earth. Other substances like carbon dioxide, coal, and sodium chloride.

Please if you know the answer put it thanks

Answers

The diagram shows a picture of a compound.

What is a compound?

A compound is a substance that is made up of two or more different elements that are chemically bonded together in a specific ratio.

This means that the elements are combined in a way that creates a new substance with different physical and chemical properties than the individual elements.

Compounds can be formed through a variety of chemical reactions, such as combining elements through a chemical bond or through a reaction between an acid and a base.

So for the given diagram, we can see that it represents two or more elements chemically combined.

Learn more about a compound here: https://brainly.com/question/29108029

#SPJ1

g As the number of nonvolatile solute particles in a given volume of solution increases, A) the boiling point increases and the vapor pressure at 25°C increases. B) the freezing point decreases and the vapor pressure at 25°C decreases. C) the freezing point increases and the vapor pressure at 25°C increases. D) the boiling point decreases and the vapor pressure at 25°C decreases. E) the freezing point increases and the vapor pressure at 25°C decreases.

Answers

Answer:

B) the freezing point decreases and the vapor pressure at 25°C decreases.

Explanation:

Colligative properties are those properties that depend on the amount of solute in solution. Both freezing point and vapour pressure are colligative properties.

As the number of nonvolatile solute particles increases, the freezing point of the solution decreases. This is known as freezing point depression.

Similarly, "Vapor pressure is a colligative property, so the vapor pressure of solutions is directly proportional to the amount of solute present in a solution. When a solute is present in a solvent, the vapor pressure is lowered because fewer solvent molecules are present at the top of the solution" (Lumen Learning).

Answer:

f u moderators

Explanation:

euurhtiuubbfjdhbgvzrbsf im sorry

what is the hardest part of the periodic table?

Answers

Answer:

carbon

Explanation:

I hope this helps :)

Answer:

carbon

Explanation:

YOU CAN MARK ME AS BRAINIEST IF YOU WANT

Which of the following is a true statement about the Earths tectonic plates?

Answers

Answer:

Pretty sure it's C

Explanation:

WHAT IS THE PERCENT OF HYDROGEN IN CU(C2H3O2)2?
WITH SOLUTION

Answers

Answer:

Hydrogen H 3.330% Carbon C 26.450% Oxygen O 35.234%

Explanation:

Which phrase describes air density? increases as altitude increases Ο Ο Ο equals mass divided by volume pushes molecules in one direction exerts less pressure as it increases

♡︎PLS HELP IM TIMED PLS WILL GIVE BRAINLIEST!!!♡︎​

Answers

Answer:

The correct answer is B. equals mass divided by volume

Answer:

They were right, I got all the questions right. If you need answers I got them I guess?

Explanation:


Is this answer correct

Answers

Answer:

Yes

Explanation:

What is the pH of a solution that has a [OH-] concentration equal to 1.36 × 10-10 M?
4.13
O 9.89
7.00
O 5.00

Answers

Answer:

Explanation:

pOH = -log1.36 X 10^-10 = 9.87

pH = 14-pOH = 14-8.97 = 5.03

20/ The IUPAC name of (CH3)3 CCH₂COOH is:- A/ 3, 3-dimethyl butanoic acid B/ 3-methyl pentanoic acid C/ Hexanoic acid D/2, 3-dimethyl butanoic acid​

Answers

Answer:

I guess correct option is A.

Other Questions
PLEASE HELP Which answer provides a counterexample to the following statement: "If a figure has an endpoint,then it is a line segment"? A(n) __________ agent is NOT a type of intelligent agent. Which equation is equivalent to: 3r = 78 + 14 ?A. 3r =78+14B. 3r =7814C. 3r14 =78D. 3r =7814 Read this passage from Benito Mussolini's "The Politicaland Social Doctrine of Fascism":The Fascist State organizes the nation, but leaves asufficient margin of liberty to the individual; the latter isdeprived of all useless and possibly harmful freedom, butretains what is essential; the deciding power in thisquestion cannot be the individual, but the State alone.Based on Mussolini's ideas, which action would Italy mostlikely take under fascist rule?A. Arrest writers who criticize the governmentB. Establish a bill of rights to protect individual libertyC. Allow citizens to vote on law enforcement policiesD. Agree to enforce laws set by an international organization make x the subject! w/ show work What does the Greek word schema mean?The new model refines the conceptual schema for the architectural design of the building.viewdrawingsplandetails WILL GIVE BRAINLIEST! Im desperate for help! This assignment is due today Im stuck! Pls help!Which expression represents the following statement? Multiply 6 by 3, and then subtract the quotient of 18 and 9. 6 x (3 18) + 9 6 + 3 + (18 9) (6 x 3) 18 9 6 x (3 + 18) + 9 the monroe doctrinebest complete diagram A student is overheard saying: "I don't need to learn the Primary Trig Ratios. I am just going to use the Sineand Cosine Laws to solve problems." Show by example that the student is right. Explain the advantages anddisadvantages to this approach. Step by step. Thank you! Raising your hand and placing it on the shoulder of a person standing in front of you, requires __________ of the shoulder. A sample of flammable liquid is placed into an enclosed cylinder which is then fitted with a movable piston. Initially the cylinder maintains a volume of 1.7 L. The sample is ignited producing gas and releasing 439.6 J of energy. To what volume will the cylinder expand to if it must expand against a pressure of 738.52 mmHg. Assume all the energy released is converted to work used to push the piston? Answer to 1 decimal space. Instructions: Find the measure of the indicated angle to the nearest degree. A nurse is caring for a client following an abdominal surgery. The client has a Penrose drain in place under the surgical dressing. The dressing is to be changed every 4 hr and as needed. Which of the following objects should the nurse use to reduce skin irritation around the incision area The increased importance that politicans have placed on public opinion polls over the last 50 years is:______ A car manufacturer is reducing the number of incidents with the transmission by issuing a voluntary recall. during week 10 of the recall, the manufacturer fixed 200 cars. in week 15, the manufacturer fixed 175 cars. assume that the reduction in the number of cars each week is linear. write an equation in function form to show the number of cars seen each week by the mechanic. f(x) = 5x 250 f(x) = 5x 250 f(x) = 10x 200 f(x) = 10x 200 A store is having a sale on chocolate chips and walnuts. For 5 pounds of chocolate chips and 3 pounds of walnuts, the total cost is $25 . For 7 pounds of chocolate chips and 9 pounds of walnuts, the total cost is $53 . Find the cost for each pound of chocolate chips and each pound of walnuts. For the government to restrict speech, the imminent lawless action test requires ______. Select the correct answer. Which organization is an interest group Identify the major species, other than water and potassium ions, at these points Describe a situation where you provided or observed high-quality customer service. in shipt