in dmd, the dystrophin protein is too short. the code for making dystophin starts with which important molecule?

The classification of trees is as follows:

1. Conifer leaves are generally thin and needle-like, while seeds are contained in cones. Conifers include pine and cedar.

2. Evergreens are plants that maintain their leaves in all seasons and include trees such as pine, cedar, and mango.

3. Hardwoods reproduce using flowers and have broad leaves; hardwoods include trees such as maple, elm, and mango.

4. Deciduous trees lose their leaves seasonally and include trees such as maple and elm.

Deciduous and coniferous trees are the two main types of trees. Since the leaves of deciduous trees tend to be wider and larger than those of conifers, they are sometimes known as broadleaf trees.

There are trees in each of the three main classes of vascular plants: angiosperms, gymnosperms, and pteridophytes (seedless vascular plants like tree ferns) (flowering plants).

Learn more about the classification of trees at: https://brainly.in/question/6823299

#SPJ1

The common name of the rectangular vessel where the solution to be analyzed by UV-Vis spectrometry is poured into is a "cuvette" or "spectrophotometer cuvette". A cuvette is a small rectangular container made of clear optical grade glass, quartz, or plastic material, which is designed to hold the sample solution and allow light to pass through it for analysis. Cuvettes are widely used in spectrophotometry and other forms of optical spectroscopy, and are available in a range of sizes and path lengths depending on the specific application.

What is UV-Vis spectrometry?

UV-Vis spectrometry is a technique that uses ultraviolet and visible light to measure the absorbance or transmission of light by a sample. It is commonly used in analytical chemistry to determine the concentration of a substance in a solution, based on its absorbance characteristics at specific wavelengths. This technique can provide valuable information about the electronic structure, concentration, and purity of a sample, making it a powerful tool in many fields of research and industry.

Hence, the answer is the common name of the rectangular vessel where the solution to be analyzed by UV-Vis spectrometry is poured into is a "cuvette" or "spectrophotometer cuvette".

To learn more about UV-Vis spectrometry, follow the link:

https://brainly.com/question/16982345

#SPJ4

Answer:

Q=M,L,T then MLT is called the dimension formula and the components a,b,c are called the dimension

The volume of the suspension that should be given to an infant weighing 18 lb would be 4.05 mL.

The suspension contains 100 mg in 5 mL.

The recommended dosage is 10 mg per kg body weight.

Weight of infant = 18 lb

1 lb = 0.45 kg

18 lb = 0.45 x 18

        = 8.1 kg

1 kg body weight = 10 mg

8.1 kg body weight = 10 x 8.1

                               = 81 mg

100 mg = 5 mL

81 mg = 81x5/100

           = 4.05 mL

In other words, the volume of the suspension that should be given to an infant weighing 18 lb would be 4.05 mL.

More on dimensional analysis can be found here: https://brainly.com/question/4992487

#SPJ1

An ibuprofen suspension for infants contains 100 mg>5.0 mL suspension. The recommended dose is 10 mg>kg body weight. How many mL of this suspension should be given to an infant weighing 18 lb? (Assume two significant figures.)

The pressure of the vaporized liquid, or vapor pressure, can be determined by a variety of experimental and theoretical methods,Here are a few examples:

1) Experimental determination: The vapor pressure can be measured experimentally using a variety of techniques, such as the isothermal-isobaric (vapor pressure) or isothermal-isochoric (vapor-liquid equilibrium) methods. In these methods, the liquid is heated in a closed container at a constant temperature, and the pressure of the vapor above the liquid is measured. The pressure is gradually increased until the vapor pressure equals the applied pressure. The pressure at this point is the vapor pressure of the liquid.

2) Antoine equation: The Antoine equation is a mathematical model that relates the vapor pressure of a substance to its temperature. This equation is based on empirical data and takes the form: log10(P) = A - (B / (T + C)), where P is the vapor pressure, T is the temperature in Kelvin, and A, B, and C are empirical constants. By fitting the Antoine equation to experimental vapor pressure data, the vapor pressure of a substance at any temperature can be predicted.

3) Clausius-Clapeyron equation: The Clausius-Clapeyron equation is a theoretical relationship that describes the dependence of the vapor pressure of a substance on its enthalpy of vaporization and temperature. This equation takes the form: ln(P2/P1) = (ΔHvap/R)((1/T1) - (1/T2)), where P1 and P2 are the vapor pressures at temperatures T1 and T2, ΔHvap is the enthalpy of vaporization, R is the gas constant, and T1 and T2 are the temperatures in Kelvin. This equation can be used to predict the vapor pressure of a substance at any temperature, given its enthalpy of vaporization.

For more questions on pressure

brainly.com/question/24719118

#SPJ4  

The percent by mass of water in the hydrated calcium sulfate is 20.95%.

What is mass?

Mass is a fundamental property of matter that represents the amount of matter in an object. It is a scalar quantity that is measured in kilograms (kg) or grams (g), and it is always conserved in any physical or chemical process.

To calculate the percent by mass of water in the hydrated calcium sulfate, we need to determine the mass of water that was present in the hydrated salt before heating. We can then use this value to calculate the percent by mass of water as follows:

Mass of water = Mass of hydrated salt - Mass of anhydrous salt

Mass of water = 2.914 g - 2.304 g

Mass of water = 0.610 g

Percent by mass of water = (Mass of water / Mass of hydrated salt) x 100%

Percent by mass of water = (0.610 g / 2.914 g) x 100%

Percent by mass of water = 20.95%

Therefore, the percent by mass of water in the hydrated calcium sulfate is 20.95%.

To learn more about mass:

https://brainly.com/question/1838164

#SPJ4

The voltage produced by the colorimeter is directly proportional to the absorbance of the sample and directly proportional to the light intensity.

A colorimeter is a tool used to measure color. The colorimeter is sensitive to the light being measured and how much color is absorbed by an object or substance. The colorimeter determines color based on the red, blue, and green components of the light absorbed by the object or sample.

There are different types of colorimeters, including color densitometers, which measure the density of primary colors, and color photometers, which measure reflection and color transmittance.

So that the voltage generated by the colorimeter is directly proportional to the absorbance of the sample and directly proportional to the intensity of the light

Learn more about colorimeter wavelength selection here :

https://brainly.com/question/3277193

#SPJ4

Atoms are the basic building blocks of matter, and since atoms are indestructible, the matter they comprise of is conserved.

We use moles when determining amounts of reactants and products in a reaction because moles allow us to express amounts of substances in terms of the number of atoms or molecules present.

What is molecules?
Molecules are the smallest units of a chemical compound that can exist on its own. They are made up of two or more atoms bonded to each other, forming a unique chemical structure. Molecules are the building blocks of all matter, and they can be found in nature as well as in artificially created compounds. Molecules can be simple or complex, and they can range in size from a few atoms to millions of atoms. They interact with each other, giving rise to chemical reactions. Molecules are essential to life, and understanding how they interact is essential to understanding chemistry.

To learn more about molecules

Here: https://brainly.com/question/26044300

#SPJ4

Watch glass is used in weighing desired amount of solid.

Watch glass is majorly used in weighing desired amount of solid that is to be used in chemical reaction, a watch glass is often placed on the scale, which is then followed by taring or zeroing of the scale so that only the weight of the sample substance is obtained excluding the weight of the watch glass. A watch glass is not only used for observing precipitation patterns and crystals, it is also used for drying solids.

A watch glass is generally round in shape, it is concave glass dish which is used for evaporation in chemistry. Watch glass can also be employed for weighing solids and as a lid for flasks and beakers.

Hence, watch glass is one of the useful component of chemistry lab.

Learn more about watch glass from the link given below.

https://brainly.com/question/10936221

#SPJ4

The lewis structure of the H₂CO₃  is as follows :

             : O :

               ||

H - : O : - C - : O : - H

The H₂CO₃  is the carbonic acid. The total valence electrons in the carbonic acid that is H₂CO₃  is the 24 electrons. the carbonic acid contains the one carbon atom that is doubly bonded to the one oxygen atom and it is singly bonded to the two other oxygen atoms. The lewis structure is also called as the electron dot structure and it is as follows :

            : O :

               ||

H - : O : - C - : O : - H

Tao learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The decaying leaves undergoing a chemical reaction to neutralize the pollutants. Therefore, the correct option is option A.

The introduction of dangerous substances is chemical pollution. Herbicides, herbicides, fertilizers, detergents, petroleum, industrial chemicals, as well as sewage are typical man-made contaminants that end up in the ocean. Further inland from coasts, a lot of ocean toxins are dumped into the ecosystem.

The movement of chemical pollutant in soil can be slowed by the presence of organic material, such as decayed leaves. The decaying leaves undergoing a chemical reaction to neutralize the pollutants.

Therefore, the correct option is option A.

To learn more about chemical pollutant, here:

https://brainly.com/question/15151619

#SPJ1

The molar mass of the Zn in the grams/ mole is the 65 g / mol.

The Zinc is the chemical element with the symbol of the Zn and the atomic number of the zinc 30. The Zinc is the slightly brittle metal at the room temperature and it has the shiny greyish appearance when it oxidation is removed. The zinc is the first element in the group 12 in the periodic table.

The noble electronic configuration of the zinc is as :

Electron configuration: [Ar] 3d¹⁰4s²

The zinc is the plays the role in the creation of the DNA, growth of the cells, the building proteins, the healing damaged tissue, and it will be supporting the healthy immune system. The molar mass of the zinc is 65 g/mol.

To learn more about molar mass here

https://brainly.com/question/22997914

#SPJ4

The answer best explains how nitrogen deficiency in plants causes chlorosis at the tips of older leaves will be Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves. Option D is correct.

Chlorosis is the yellowing of leaves, which occurs when plants cannot produce enough chlorophyll. Nitrogen is an essential component of chlorophyll and is required for its synthesis. When plants are deficient in nitrogen, they cannot produce enough chlorophyll in mature areas of older leaves.

Option A is incorrect because while nitrogen is a component of many enzymes, a nitrogen deficiency would not cause new growth to stop since new growth relies on other essential nutrients as well.

Option B is also incorrect since proton pumps are not directly regulated by nitrogen and proton pumps do not specifically supply energy to growing tissue at the tips of older leaves.

Option C is partially correct, as nitrogen is indeed mobile and can be re-located from older leaves to growing parts of the plant. However, this does not explain why nitrogen deficiency causes chlorosis in older leaves.

Hence, D. Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves is the correct option.

To know more about nitrogen deficiency here

https://brainly.com/question/30639048

#SPJ4

--The given question is incomplete, the complete question is

"Which answer best explains how nitrogen deficiency in plants causes chlorosis at the tips of older leaves? A) Nitrogen is a component of all enzymes, so new growth will stop if nitrogen is deficient. B) Nitrogen regulates proton pumps that supply energy to growing tissue at the tips of older leaves. C) Nitrogen is a component of chlorophyll, but it is mobile and is re-located from older leaves to growing parts. D) Nitrogen is necessary to synthesize chlorophyll in mature areas of older leaves."--

Silicon is not an element of set 18. The correct answer to this question is b.

An element is a substance that cannot be broken down into simpler substances through chemical reactions. Each element is identified by a unique atomic number, which represents the number of protons in its nucleus. The set of 18 elements includes helium, neon, and krypton, but not silicon.

Any one of the seven chemical elements that compose Group 18 (VIIIa) of the periodic table is referred to as a noble gas. Helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson are the constituent elements (Og).

To know more about  periodic table here:

https://brainly.com/question/11155928#

#SPJ11

According to law of conservation of mass, 2.0 g calcium reacts with 1.9 g fluorine  to form 3.9 g of calcium fluoride .

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Mass of reactants=mass of products which is 2+1.9=3.9 g which is equal to mass of product hence law of conservation of mass,is obeyed.

Learn more about law of conservation of mass,here:

https://brainly.com/question/15289631

#SPJ9

The molar mass of acetone is approximately 58.08 g/mol.

The chemical formula of acetone is C₃H₆O. To calculate its molar mass, we need to find the atomic masses of each element in the compound and then add them up based on the molecular formula.

The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.

The molar mass of acetone can be calculated as follows:

Molar mass of acetone = (3 x atomic mass of C) + (6 x atomic mass of H) + (1 x atomic mass of O)

Molar mass of acetone = (3 x 12.01 g/mol) + (6 x 1.01 g/mol) + (1 x 16.00 g/mol)

Molar mass of acetone = 58.08 g/mol

To know more about molar mass here

https://brainly.com/question/22997914

#SPJ4

A hybrid orbital is a linear combination of atomic orbitals of the same atom. The orbitals which hybridize to form the bonds in CH₄ are 1s, 2pₓ, 2py, 2pz. The correct option is A.

The process hybridization is the intermixing of various atomic orbitals of slightly different energies in the same atom with redistribution of their energies to yield a new set of orbitals of equivalent energies and shapes.

Here the orbitals of 'C' in excited state are 1s²2s¹2px¹2py¹2pz¹. So the 2s and the three 2p orbitals of 'C' mix among themselves with redistribution of energy to form four new sp³ hybrid orbitals.

Thus the correct option is A.

To know more about hybridization, visit;

https://brainly.com/question/29020053

#SPJ1

Apparent weight = 639 N + (65.14 kg x 2.9 m/s²) = 835 N [2].When the elevator has an upward acceleration of magnitude 2.90 m/s², the reading on the scale will be different from the person's normal weight due to the apparent weight caused by the elevator's acceleration .

The apparent weight is the force experienced by the person inside the elevator, and it is related to the actual weight and the acceleration of the elevator.To calculate the apparent weight of a person in an elevator, we can use the formula:

apparent weight = actual weight + (mass of the person x acceleration of the elevator)

where the mass of the person is equal to the actual weight divided by the acceleration due to gravity, which is 9.81 m/s².

For example, if a person's normal weight is 639 N (about 65.14 kg) and the elevator has an upward acceleration of 2.9 m/s², the apparent weight will be:

apparent weight = 639 N + (65.14 kg x 2.9 m/s²) = 835 N [2]

Similarly, if a person's normal weight is 655 N and the elevator has an upward acceleration of 2.9 m/s², the scale reading will be different from their normal weight, and the apparent weight can be calculated using the above formula

Find  more about apparent weight

brainly.com/question/8853595

#SPJ4

The ionization constant, also known as the acid dissociation constant or Ka, is a measure of the strength of an acid in a solution.

Ionization constant is the equilibrium constant for the ionization reaction of an acid, and is defined as the product of the concentrations of the ions produced when the acid dissociates, divided by the concentration of the undissociated acid.

In mathematical terms, the ionization constant is represented as: Ka = [H+][A-]/[HA]

Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the undissociated acid.

The higher the ionization constant, the stronger the acid is, and the more it will dissociate in a solution. Conversely, a lower ionization constant indicates a weaker acid that will not dissociate as much.

It is important to note that the ionization constant is different from the ionization energy, which is the amount of energy required to remove an electron from an atom or molecule.

To know more about ionization constant here:

https://brainly.com/question/13794673#

#SPJ11

The mass of sodium acetate trihydrate required to make 100ml of a 0. 100 m solution is 82g.

Mass is an intrinsic property of a body. It was customarily accepted to be connected with the amount of issue in an actual body, until the disclosure of the iota and molecule material science. It was tracked down that various molecules and different rudimentary particles, hypothetically with a similar measure of issue, have in any case various masses. Mass in present day physical science has different definitions which are adroitly unmistakable, yet all at once genuinely same. Mass can be tentatively characterized as a proportion of the body's idleness, meaning the protection from speed increase (change of speed) when a net power is applied.[1] The item's mass likewise decides the strength of its gravitational fascination with different bodies.

We know that Molarity=number of mole of solute /volume of any solution(solvent) in ml.

Here,we have volume of solution=100ml

also molarity(concentration)=0.100M

Also number of moles of solute=mass of solute/atomic weight of solute.

We know that atomic weight of  sodium acetate trihydarte=82g

So,0.1=(x/82) / 100

=>0.1×82×100=x

=>x=82g

Hence,required mass of sodium acetate trihydrate is 82g.

To know more about mass,visit here:

https://brainly.com/question/10033868

#SPJ4

Might cause the mass of a product to be more than the theoretical mass are impurities, incomplete reactions, and measurement errors.

There are several factors that could cause the mass of a product to be more than the theoretical mass:
1. Impurities: If there are impurities present in the reactants or the product, this could cause the mass of the product to be more than the theoretical mass.
2. Incomplete reactions: If the reaction is not allowed to go to completion, there may be unreacted reactants left in the product, which could increase the mass of the product.
3. Measurement errors: If there are errors in the measurement of the reactants or the product, this could cause the mass of the product to be more than the theoretical mass.

In conclusion, impurities, incomplete reactions, and measurement errors are all factors that could cause the mass of a product to be more than the theoretical mass.

Learn more about reactants at:

https://brainly.com/question/30639017

#SPJ11

Sand is heterogeneous because it is made up of different-sized grains that do not have uniform properties.

Sand is a naturally occurring granular material that is made up of different-sized particles of rocks, minerals, and shells. These particles can vary in size, shape, and composition, resulting in a mixture of grains with different physical and chemical properties. Some grains may be round and smooth, while others may be sharp and angular.

They may also have different colors, densities, and chemical compositions. Due to this variation, sand cannot be considered a pure substance, and its properties will vary depending on the mixture of grains present. Therefore, sand is classified as a heterogeneous mixture.

To know more about the sand, here

brainly.com/question/3054494

#SPJ4

The Ca₃(PO₄)₂ molar mass is 310 g/mol. The name of the compound Ca₃(PO₄)₂ is the calcium phosphate.

The chemical name of the compound with the formula of Ca₃(PO₄)₂ is the calcium phosphate. The calcium phosphate is the ionic compound that means the calcium phosphate is formed by the complete transfer of the electrons.

The molar mass of the calcium = 40 g/mol

The molar mass of the phosphorus = 31 g/mol

The molar mass of the oxygen = 16 g/mol

The molar mass of the Ca₃(PO₄)₂ = 3 (40) + 2 (31) + 16 (8)

The molar mass of the Ca₃(PO₄)₂ = 310 g/mol

To learn more about molar mass here

https://brainly.com/question/22997914

#SPJ4

The number of moles of iron needed to react with 16.0 moles of sulfur is 128.0 moles.

The term mole is defined as  a standard scientific unit for measuring large quantities of very small particles such as atoms, molecules, or other specified particles.

one mole is equal to 6.023 × 10²³ molecules.

To calculate of number of moles of iron

Given equation as follows:

8Fe + S8 ⇒ 8 FeS

Moles of sulfur = 16.0

To react 1 mole of sulfur, we need 8 moles of Fe

Then, for 16.0 moles of sulfur we need

= 16 × 8

= 128 moles

Thus, the number of moles of iron needed to react with 16.0 grams of sulfur is 128 moles.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

The molecular mass and molar mass of carbon monoxide are both 28.01 g/mol.

Molecular mass is the mass of one molecule of a substance, measured in atomic mass units (amu). Molar mass is the mass of one mole of a substance, measured in grams per mole (g/mol).

To find the molecular mass of carbon monoxide, we add the atomic mass of carbon (12.01 amu) to the atomic mass of oxygen (16.00 amu):
12.01 amu + 16.00 amu = 28.01 amu.

Since the molecular mass and molar mass are numerically equivalent, the molar mass of carbon monoxide is also 28.01 g/mol.

To know more about molecular mass here:

https://brainly.com/question/15880821#

#SPJ11

Correct option is (c). The set of quantum numbers is permissible for an electrons in an atom is n = 2, l=1, m=0, s= + 1/2.

There are total of four quantum numbers are used to describe completely the movement of each electron within an atom. The combination of all the quantum numbers in an atom is described by a wave function. Each of the electron in an atom has a unique set of quantum numbers. Quantum numbers can be used to determine the electron configuration of an atom and the probable location of the electrons of an atom. It is used to understand other characteristics of atoms such as ionization energy and the atomic radius. It describes the values of conserved quantities in the dynamics of a quantum system.

To learn more about Quantum numbers please visit:

https://brainly.com/question/2292596

#SPJ4

The correct question is,

Which of the following sets of quantum numbers is permissible for an electrons in an atom?

A. n=1, l=1, m=0, s =+ 1/2

B. n=3, =1, m=2, s= - 1/2

C. n=2, l=1, m=0, s= + 1/2

D. n=2, l=0, m=0, s=1

The correct combination holding the potential to indicate spontaneous reactions is +ΔS, -ΔH.

As the naming of both ∆H and ∆S is given, so let us understand their definition. Enthalpy is representative of total energy of the system along with product of pressure and volume. It refers to energy content.

Entropy, on the other hand, is randomness or unavailable energy of a system. Now spontaneity of the reaction refers ability to carry out a reaction without requiring external energy. As obvious, the system with excess energy or releasing the energy and less unusable energy can carry out spontaneous reaction.

Learn more spontaneous reaction -

https://brainly.com/question/14061406

#SPJ4

Hexane is a type of structural isomer.

Structural isomers are molecules that have the same molecular formula but different arrangements of atoms. In the case of hexane, it is an organic compound with the molecular formula [tex]C_6H_{14}[/tex], and it has five different isomers due to the different arrangements of its carbon atoms.

The simplest form of hexane is n-hexane, which has a straight chain of carbon atoms. The other four isomers, 2-methylpentane, 3-methylpentane, 2,3-dimethylbutane, and 2,2,3-trimethylbutane, all have branching in their carbon chains.

To know more about the hexane, here

brainly.com/question/30549157

#SPJ4

A amount of shine best describes visible light. Therefore, option A is correct.

Light, also known as "visible light," refers to the visible region of the electromagnetic spectrum, or the range of wavelengths that cause humans to perceive brightness and color. It falls somewhere between UV and infrared radiation.

People think of the sun, light bulbs, candles, and fire when they think of light, but visible light comes from many sources and in many colors. Other visible light sources include television and computer screens, glow sticks, and fireworks.

Thus, option A is correct.

To learn more about the visible light, follow the link;

https://brainly.com/question/10709323

#SPJ9

Potassium is important for maintenance a normal blood pressure in our body. The healthy levels of potassium intake is 4700 mg for an adult.

Potassium is found naturally in many foods and supplements. The main role of the body is to maintain normal fluid levels inside the cells. Potassium also helps muscle contraction and maintains normal blood pressure. Higher intakes may help reduce the risk of high blood pressure, salt sensitivity and stroke. It can also prevent osteoporosis and kidney stones. Sources of potassium include dried apricots, lentils, pumpkin, prunes, potatoes, beans and bananas. The average adult's recommended potassium intake is 4,700 milligrams (mg) per day.

To learn more about potassium, visit :

https://brainly.com/question/29897293

#SPJ4