The group of people who controlled the government in Mexico were called the criollos. They had positions of wealth and influence in society.
Who were the criollos?The criollos were people of Spanish descent who were born in the colonies of the Spanish Empire, including Mexico. They were a privileged class that held positions of wealth and influence in society, including political power.
The group of people who controlled the government in Mexico were called the criollos. The revolution for independence from Spain was started by a priest who went by the name Miguel Hidalgo. Agustin de Iturbide declared Mexico independent, and later he established a monarchy. He was overthrown just a year later, and Mexico became a republic.To find out more about criollos, visit:
https://brainly.com/question/29617443
#SPJ1
The equation for the fermentation of glucose to alcohol and carbon dioxide is C6H12O6(aq) → 2C2H5OH(aq) + 2CO2(g) The enthalpy change for the reaction is −67 kJ. Is the reaction exothermic or endothermic? Is energy, in the form of heat, absorbed or evolved as the reaction occurs?
In the reaction of glucose converting to ethanol we can say energy, in the form of heat, is evolved as the reaction occurs. It is an exothermic reaction.
What is exothermic reaction?
An exothermic reaction is a reaction in which energy is released in the form of light or heat. Thus in an exothermic reaction, energy is transferred into the surroundings rather than taking energy from the surroundings as in an endothermic reaction. In an exothermic reaction, the change in enthalpy ( ΔH) will be negative.
The enthalpy change for the reaction is −67 kJ, which means that 67 kJ of energy is released during the reaction. This indicates that the reaction is exothermic since it releases heat.
Exothermic reactions release energy in the form of heat as the reaction occurs. In this case, the energy released during the fermentation of glucose to alcohol and carbon dioxide is in the form of heat. The heat released can be measured experimentally and is equal to the enthalpy change of the reaction. Therefore, we can say that energy, in the form of heat, is evolved as the reaction occurs.
Learn more about exothermic reaction on:
https://brainly.in/question/19363174
#SPJ11
the maximum solubility of salicylic acid in pure ethanol is 0.370 g/ml. the molal boiling point elevation constant, kb, for ethanol is 1.07 c/m. the density for ethanol is 0.789 g/ml. the boiling point for ethanol is 78.3 c. what is the maximum temperature change for a solution of salicylic acid in ethanol? show all calculations.
The maximum temperature change for a solution of the salicylic acid compound in ethanol is about 0.002292°C.
What is Maximum temperature change?To calculate the maximum temperature change for a solution of salicylic acid in ethanol, you need to use the boiling point elevation equation:
ΔT = Kb × m
where, Kb is the molal boiling point elevation constant, and m is the molality of the solution. The molality of the solution can be calculated using the following equation:
m = (mass of solute (g))/(1000 × molal mass (g/mol)*density of the solvent (g/mL))
Therefore, for the given equation:
m = (0.370 g)/(1000 × 137.1 g/mol × 0.789 g/mL) = 0.002181 mol/kg
ΔT = Kb × m = 1.07 c/m × 0.002181 mol/kg = 0.002292°C
Therefore, the maximum temperature change for a solution of salicylic acid in ethanol is 0.002292°C.
Learn more about Salicylic acid here:
https://brainly.com/question/14635153
#SPJ11
how to capturing unknown substrates via in situ formation of tightly bound bisubstrate adducts: s-adenosyl-vinthionine as a functional probe for adomet-dependent methyltransferases?
In situ formation of tightly bound bisubstrate adducts can be used to capture unknown substrates. S-adenosyl-vinthionine can be used as a functional probe for AdoMet-dependent methyltransferases. This is the answer to how to capturing unknown substrates via in situ formation of tightly bound bisubstrate adducts: s-adenosyl-vinthionine as a functional probe for AdoMet-dependent methyltransferases.
Methyltransferases play an important role in the regulation of gene expression and protein function. AdoMet-dependent methyltransferases use S-adenosylmethionine (AdoMet) as a substrate to transfer methyl groups to various targets.
In order to identify unknown substrates of AdoMet-dependent methyltransferases, researchers can use S-adenosyl-vinthionine as a functional probe. S-adenosyl-vinthionine is a structural analogue of AdoMet that can form a tightly bound bisubstrate adduct.
Know more about methyltransferases here:
https://brainly.com/question/15304741
#SPJ11
According to the kinetic molecular theory, the particles of an ideal gas
a. Have no potential energy
b. Have strong intermolecular forces
c. Are arranged in a regular, repeated geometric pattern
d. Are separated by great distances, compared to there size
According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.
A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.
According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.
To know more kinetic theory of gases, visit,
https://brainly.com/question/11067389
#SPJ4
Can you tell which one of the four examples corresponds to the making of a hydrocarbon
fuel from CO2 and water?
A hopeful method for lowering greenhouse gas emissions and creating sustainable energy sources is the process of converting CO2 and water into a hydrocarbon fuel.
The process of making a hydrocarbon fuel from CO2 and water is called "artificial photosynthesis," and it involves using renewable energy sources to convert carbon dioxide and water into a liquid hydrocarbon fuel. This process is similar to photosynthesis in plants, where sunlight is used to convert carbon dioxide and water into glucose and oxygen.
Out of the four examples provided, it is not clear which one corresponds to the making of a hydrocarbon fuel from CO2 and water. However, one possible process involves using solar energy to drive the reaction between carbon dioxide and water, which results in the formation of a liquid hydrocarbon fuel. This process involves capturing carbon dioxide from the air or from industrial processes and combining it with water in the presence of a catalyst to produce a liquid hydrocarbon fuel.
Overall, the process of making a hydrocarbon fuel from CO2 and water is a promising approach to reducing greenhouse gas emissions and producing sustainable energy sources.
To learn more about hydrocarbon refer to:
brainly.com/question/17578846
#SPJ4
PLEASE HELP ASAP!!!!!
The option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
The electron configuration for vanadium (V) is:
1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{6}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{3}[/tex]
For only the 3d sublevel, the configuration would be 3d3.
So, the option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
What is an electron?
An electron is a subatomic particle that carries a negative electric charge. It is one of the fundamental particles that make up atoms, along with protons and neutrons. Electrons are found outside the nucleus of an atom in regions called shells or energy levels, and they are responsible for chemical bonding and the conduction of electricity.
What is vanadium?
Vanadium is a chemical element with the symbol V and atomic number 23. It is a hard, silvery-grey, ductile, and malleable transition metal that is found in various minerals and mineral ores. Vanadium has several important industrial uses, including as an alloying agent in steel and as a catalyst in the production of sulfuric acid. It is also used in the production of titanium alloys for aerospace and other high-performance applications, as well as in the manufacture of rechargeable batteries. Vanadium has biological functions in some organisms and is considered an essential trace element in the human diet.
To know more about vanadium, visit:
https://brainly.com/question/14247240
#SPJ1
calculate the mass of butane needed to produce 46.0 g of carbon dioxide.
A mass of 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
Mass of butane (g) = Mass of carbon dioxide (g) / Molecular mass of carbon dioxide (g/mol) x Molecular mass of butane (g/mol)
Mass of butane (g) = 46.0 g / 44.01 g/mol x 58.12 g/mol = 28.3 g
Therefore, 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
Butane has a molecular formula of C4H10 and is a hydrocarbon. Carbon dioxide has a molecular formula of CO2 and is composed of carbon and oxygen atoms.
When butane undergoes combustion, it reacts with oxygen from the atmosphere and forms carbon dioxide.
The reaction between the two molecules produces heat energy, which is why we measure the mass of butane needed to produce the desired amount of carbon dioxide.
This reaction can be represented by the following chemical equation:
C4H10 + 6O2 → 4CO2 + 5H2O + energy
Thus, the reaction between butane and oxygen produces carbon dioxide, water, and energy. This is why 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
to know more about butane refer here:
https://brainly.com/question/30325983#
#SPJ11
how to calculate percent transmittance from absorbance?
Percent transmittance and absorbance are two measures of amount of light that passes through a sample of a solution. Absorbance is a logarithmic measure of the amount of light absorbed , while percent transmittance is the percentage of light that passes through it.
To calculate percent transmittance you can use: [tex]%T = 10^{(-A)} x 100[/tex]%T = 10^{(-A)} x 100
It is derived from relationship between absorbance and percent transmittance, which is described by the Beer-Lambert law. The law states that absorbance is directly proportional to the concentration of the absorbing substance in solution and path length of the light through the sample. Therefore, by measuring the absorbance of a sample and knowing the path length and concentration, you can calculate percent transmittance using the above formula.
To know more about Percent transmittance, here
brainly.com/question/12025463
#SPJ4
b) which compound, a or b, was the limiting reagent in this reaction? compound b c) consider the lane that shows the reaction mixture. are the starting materials more or less polar than the reaction product? more polar
As per the information provided in the question, the compound that is the limiting reagent is "B". And the starting materials were "more polar" than the reaction product.
The limiting reagent is the one that gets consumed completely in the reaction. The other reactant is left behind in excess. The reaction's speed is determined by the amount of the limiting reagent present. In the given reaction, compound B is the limiting reagent. We can prove this by comparing the number of moles of compounds A and B. We can see that compound B has fewer moles. Therefore, it is the limiting reagent. 2 moles of compound A react with 1 mole of compound B. We have 2 moles of A and 1 mole of B in this reaction mixture. Hence, compound B is the limiting reagent. Starting materials are more polar than the reaction product. When a chemical reaction occurs, the reactants combine to form a new compound or product. The product's properties are often different from those of the starting materials. In this reaction, the starting materials are more polar than the reaction product. This can be seen by observing the reaction mixture's lane. We can see that the reaction product has moved ahead of the starting materials on the chromatogram. The starting materials are more polar than the reaction product.
For more information regarding this topic, you can click the below link
https://brainly.com/question/26905271
#SPJ11
Which compound below will readily react with a solution of bromine resulting from a mixture of 48% hydrobromic acid and 30% hydrogen peroxide? a.Cyclohexene b.Dichlorometane c.Acetic acid d.t-Butyl alcohol e.Cyclohexane
The compound that will readily react with the solution of bromine resulting from the mixture of hydrobromic acid and hydrogen peroxide is option (a) Cyclohexene.
What is solution?A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture.
Free bromine (Br2), a potent electrophilic and oxidizing agent, can be produced in situ by mixing hydrobromic acid (HBr) and hydrogen peroxide (H2O2). So, we must choose a substance that Br2 can easily react with in these circumstances.
Cyclohexene, one of the provided compounds, is an unsaturated double-bonded molecule that can go through electrophilic addition processes. With alkenes like cyclohexene, bromine easily engages in an electrophilic addition process to generate a dibromoalkane.
Hence, option (a) cyclohexene is the substance that will most rapidly react with the bromine solution produced by the mixture of hydrobromic acid and hydrogen peroxide.
Learn more about mixtures on:
https://brainly.com/question/24647756
#SPJ11
the doctors orders ampicillin 400mg iv every 6 hours. the drug comes in as powder in a vial. the directions state to add 3.5ml of diluent. the resulting solution contains 250mg ampicillin per milliliter. how many milliliters will you give?
1.6 mL of the ampicillin solution should be given every 6 hours as per the doctor's orders.
What is Drugs?
Drugs are substances that can be used to diagnose, treat, cure, or prevent disease, or to alleviate symptoms of disease. They can be natural or synthetic compounds, and they work by interacting with biological systems in the body to produce a therapeutic effect.
Drugs can be classified based on their pharmacological action, therapeutic use, chemical structure, or source. They can be administered in various forms, such as pills, capsules, injections, topical creams, or inhalers, and can be prescribed by licensed healthcare professionals.
The total dose of ampicillin required is 400 mg every 6 hours.
To prepare the solution, we need to add 3.5 mL of diluent to the vial containing the ampicillin powder. The resulting solution contains 250 mg of ampicillin per mL.
To determine how many milliliters of the solution to give, we can use the following equation:
Total dose of ampicillin required / concentration of ampicillin in solution = volume of solution to give
Substituting the values given:
400 mg / 250 mg/mL = 1.6 mL
Learn more about Drugs from given link
https://brainly.com/question/12646017
#SPJ1
Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C . Round your answer to 3 significant digits.
Root mean square (RMS) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴m/s.
The root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C can be calculated as follows:
Given data: Pressure, P = 0.17atm Temperature, T = -52°C = 221 K
Atomic weight of Neon, m = 20.18 g/mol = 20.18 × 10^-3 kg/molR = 8.314 J/mol KKB = R/NA = 1.38 × 10^-23 J/K (Boltzmann constant).
The root mean square (rms) velocity of gas is given by the equation:rms velocity, vrms = [3KB T/m]^1/2where, m = molar mass of gas, T = temperature, and KB = Boltzmann constant.
Substituting the given data, we get:v(rms) = [3KB T/m]^(1/2)v(rms) = [3KB T/m]^(1/2)v(rms) = [3 × (1.38 × 10^-23 J/K) × 221 K / (20.18 × 10^-3 kg/mol)]^(1/2)v(rms) = [4.981 × 10^-20 m^2/s^2]^(1/2) = 2.233 × 10⁻⁴ m/s.
Therefore, the RMS average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴ m/s (rounded off to 3 significant digits).
For more information about RMS average speed refer here
https://brainly.com/question/13095222?
#SPJ11
For these ions, write the correct symbol and charge
1.) rhenium (IV) ion
2.). iridium (IX) ion
3.)platinum (II) ion
4.)technetium (VII) ion
Rhenium (IV) ion is represented as Re4+.Iridium (IX) ion is not possible as the maximum possible element state for iridium is +VIII.Platinum (II) ion is represented as Pt2+. Technetium (VII) ion is represented as Tc7+.
Where is an ion's charge located?The net charge is expressed in superscript directly just after chemical structure of the molecule/atom in the chemical equation for just an ion. The doubly charge cation is denoted as 2+ rather than +2 because the size of the net charge was written before the sign.
How is a +2 ion created?A metal ion occurs whenever a metal gives up the outermost electrons to obtain a full octet. Calcium (Ca) will become a cation when it loses two electrons from of the outermost energy shell. There will be a +2 charge on it because it lost 2 electrons. With more protons than electrons, it has a positive charge (+2).
To know more about element visit:
https://brainly.com/question/14347616
#SPJ1
which of the following relationships correctly express the clausius-clapeyron equation, which relates vapor pressure to temperature? select all that apply. multiple select question. a) ln p=-delta Hvap/R (1/T) +C
B) ln p=-delta Hvap/R (T2-T1)
C) ln p=-delta Hvap/nR T (1/T) +C
D) ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E) ln P2/P1=-delta Hvap/R (1/T2-1/T1)
The Clausius-Clapeyron equation relates vapor pressure to temperature and the correct relationships are A, D, and E.
A: ln p=-delta Hvap/R (1/T) +C
D: ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E: ln P2/P1=-delta Hvap/R (1/T2-1/T1)
Explanation:
The Clausius-Clapeyron equation relates vapour pressure to temperature. The relationships that correctly express the Clausius-Clapeyron equation are:A) ln p = -ΔHvap/R(1/T) + C (This equation shows that the natural log of the vapor pressure is inversely proportional to the temperature.)D) ln P1/P2 = -ΔHvap/R (1/T2 - 1/T1) (This equation shows that the natural log of the ratio of two vapor pressures is proportional to the reciprocal of temperature difference.)E) ln P2/P1 = -ΔHvap/R (1/T2 - 1/T1) (This equation is the same as equation D but the order of the pressure ratio is reversed.)Therefore, options A, D, and E correctly express the Clausius-Clapeyron equation which relates vapor pressure to temperature.
For more such questions on Clausius Clapeyron
https://brainly.com/question/24073811
#SPJ11
3. Which statement best describes chemical bonding?
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Answer:
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Explanation:
a. The gluing together of any two atoms that don't have full outer shells refers to chemical bonding, which can occur through different mechanisms such as covalent bonding, ionic bonding, and metallic bonding.
b. The separation of electrons from the main atom refers to ionization, where an atom or molecule loses or gains one or more electrons and becomes charged.
c. The joining of atoms by a shared interest of valence electrons which ends up creating new substances refers to covalent bonding, where atoms share electrons to form a stable molecule.
d. The melting of substances to form new solids does not necessarily create new substances; it is a physical change where a solid is transformed into a liquid due to an increase in temperature. Upon cooling, the liquid may solidify again, either forming the original substance or a different solid phase.
The results of the gold foil experiment led to the conclusion that an atom is
1.
mostly empty space and has a small, negatively charged nucleus
2.
mostly empty space and has a small, positively charged nucleus
3.
a hard sphere and has a large, negatively charged nucleus
4.
a hard sphere and has large a large, positively charged nucbus
The results of the gold foil experiment led to the conclusion that an atom is mostly empty space and has a small, positively charged nucleus.
This was concluded by Ernest Rutherford, Hans Geiger, and Ernest Marsden through their gold foil experiment.
The Gold Foil Experiment was an experimental test conducted by Ernest Rutherford, Hans Geiger, and Ernest Marsden in which they bombarded alpha particles onto thin gold foils, expecting them to pass right through the gold foil. The team was astonished when the alpha particles were deflected back in all directions.
The results of the gold foil experiment led to the conclusion that an atom is mostly empty space and has a small, positively charged nucleus. Most of the alpha particles passed straight through the gold foil, indicating that the atom's mass was not evenly distributed but instead concentrated in a small, positively charged nucleus in the atom's center.
The Rutherford model, often known as the planetary model of the atom, was developed by Ernest Rutherford following the gold foil experiment. The model depicted the atom as a tiny, dense, and positively charged nucleus, with electrons orbiting the nucleus in the way that planets orbit a star.
For more such questions on atom, click on:
https://brainly.com/question/26952570
#SPJ11
which solution has the highest boiling point at standard pressure? (1) 0.10 m mgcl2(aq) (2) 0.10 m mgso4(aq)
The solution with the highest boiling point at standard pressure is the one with the highest concentration of solutes, which increases the boiling point of the solution. In this instance, the answer is 0.10 M MgCl2(aq).
What is boiling point and standard pressure?
Boiling point: The boiling point of a solution is the temperature at which the vapour pressure of the solution equals the external pressure, allowing the solution to boil.
Standard pressure: One atmosphere of pressure is defined as the standard pressure.
A solution has the highest boiling point at standard pressure (1 atm) when it has the greatest concentration of solutes (molarity).
Which solution has the highest boiling point at standard pressure?
MgCl2 will have the greatest boiling point at a normal pressure since it has the most solute concentration.
The boiling point of a liquid is raised when solutes are added to it because the vapour pressure of the solution is lowered, thus more energy is required to break the intermolecular forces between the solvent and solute particles.
The boiling point of the solution rises as more solute is dissolved in the solvent, and the solvent-solute intermolecular forces become stronger, thus increasing the boiling point.
As a result, the 0.10 M MgCl2(aq) solution has the greatest boiling point among the options given.
for more information about boiling point at standard pressure refer here:
https://brainly.com/question/238983?
#SPJ11
In which of these gas-phase equilibria is the yield of products increased by increasing the total pressure on the reaction mixture? (A) CO(g) + H2O (8) CO2 (g) + H2(g) (B) 2NO(g) + Cl2 (g) + 2NOCI (8) (C) 250, (g) = 2502(g) + O2(g) (D) PCIs () PC13 (8) + Cl2 (8) 6. K, for the reaction of SO2 (g) with O2 to produce SO; (g) is 3 x 1024 Calculate K, for this reaction at 25°C. 2SO2 (g) + O2(g) 250 (8) (A) 3 x 1024 (B) 5 x 1021 (C) 2 x 1020 (D) 5 x 1022 (E) 7 x 102 7. The molar solubility of magnesium carbonate is 1.8 x 10 mol/L. What is Kp for this compound? (A) 1.8 x 10 (B) 3.6 x 10-4 (C) 1.3 x 10-7 (D) 3.2 x 10 (E) 2.8 x 10-14
The correct answer is (B) 2NO(g) + Cl2 (g) + 2NOCI (8). Increasing the total pressure on the reaction mixture will increase the yield of products. For the second question, the correct answer is (E) 7 x 102. Kp for the molar solubility of magnesium carbonate is 3.6 x 10-4.
Chemical equilibrium refers to the situation in a chemical reaction where both the reactants and products are present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. When the forward reaction and the reverse reaction go forward at the same speed, this condition results. The forward and backward reactions typically have equal, if not zero, reaction rates. The concentrations of the reactants and products do not change on a net basis as a result. Dynamic equilibrium is the name given to such a situation.
The reaction's Gibbs free energy, G, must be taken into account at constant temperature and pressure. The Helmholtz free energy, A, must be taken into account at constant temperature and volume. The reaction's entropy, S, must be taken into account at constant internal energy and volume.
In geochemistry and atmospheric chemistry, where pressure changes are considerable, the constant volume case is crucial.
It is thought about the case of constant pressure. By taking into account chemical potentials, the relationship between the Gibbs free energy and the equilibrium constant can be discovered.
The Gibbs free energy for the reaction, G, under constant temperature and pressure in the absence of an applied voltage, depends only on the degree of the reaction: (Greek letter xi), and can only decrease in accordance with the second law of thermodynamics. That indicates that if the reaction occurs, the derivative of G with respect to must be negative; at equilibrium, this derivative equals zero.
For more such questions on pressure , Visit:
https://brainly.com/question/24719118
#SPJ11
examine the ungraded ball‑and‑stick model to determine the three‑dimensional structure of the molecule. on the corresponding 2d structure, draw one wedge bond and one dash bond over two existing bonds to indicate the same arrangement of atoms in space. the narrow part of each wedge‑and‑dash bond should be towards the same central carbon atom.
In geometry, a three dimensional form may be described as a solid figure or an item or shape that has three dimensions— length, breadth, and height.
What is dimensional structure?Two-dimensional structures are often composed of thin structured slabs of metals and dielectrics on a substrate and enable confinement along two dimensions in the plane transverse to the direction of propagation.
Proteins require a three-dimensional structure because they function as enzymes and cell building components. Proteins have a crucial role as structural elements in cells. Proteins have a set form to offer structure for cells, similar to how bricks have a definite shape to provide structure for our buildings.
Learn more about dimensional
https://brainly.com/question/27271392
#SPJ1
The answers are:
(S)-1-chloro-2,3-dimethylbutaneS configuration, which stands for counterclockwise priority sequence, is provided.Wedge for the methyl group and slash for the H group are placed at the second carbon.What is dimensional structure?Two-dimensional structures, which allow confinement along two dimensions in the plane perpendicular to the path of propagation, are frequently made of thin structured slabs of metals and dielectrics on a substrate.
The carbon on the left is assigned top priority because it is joined to a chlorine atom, which has a much higher molar mass than C and H.
2nd priority is given to the isopropyl group .
3rd priority is given to methyl group
4th priority is given to H.
To know more about dimethylbutane, visit:
https://brainly.com/question/30639612
#SPJ1
Complete these Brønsted–Lowry reactions.
The reaction can be solved as reaction 1 :-HPO²¯ + H+ − H₂ + PO²¯ reaction 2: -HPO²¯ +OH¯ ⇒ H₂O + PO²¯
What is Brønsted–Lowry reactions. ?
Brønsted–Lowry reactions are a type of acid-base reaction in which an acid donates a proton (H+) to a base, which then accepts the proton. The Brønsted–Lowry theory defines an acid as a species that donates a proton, while a base is a species that accepts a proton.
In a Brønsted–Lowry acid-base reaction, the acid and base always exist in a conjugate acid-base pair, which are related to each other by the transfer of a proton. For example, in the reaction:
HA + B- → A- + HB
HA is the acid and donates a proton to B-, which is the base. The product A- is the conjugate base of the acid HA, and the product HB is the conjugate acid of the base B-.
Brønsted–Lowry reactions are an important concept in chemistry and are used to explain many types of reactions, including acid-base titrations, buffer solutions, and chemical equilibria.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ1
1 2 3 4 5 6 7 8 9 10 which statement best compares the melting point of butane (c4h10) with that of octane (c8h18)?the melting points of both substances are identical.the melting point is higher for butane.the melting point is higher for octane.the comparison of melting points cannot be made.
The comparison of melting points cannot be made is the best statement for the melting point of butane (C₄H₁₀) with that of octane (C₈H₁₈) because of the greater force of attraction and higher molecular weight.
What is melting point?The physical property of melting point can be defined as the temperature at which a solid substance is transformed into a liquid state. The greater the forces of attraction that exist between the molecules in a substance, the higher the melting point of the substance is.
Melting point comparison Butane (C₄H₁₀) and octane (C₈H₁₈) are both hydrocarbon chains. The molecular weight of octane is greater than that of butane. The melting point of a substance increases as its molecular weight increases. Because, octane has a greater molecular weight than butane, it has a higher melting point.
The comparison of melting points cannot be made between butane (C₄H₁₀) and octane (C₈H₁₈). Because the melting points of butane and octane cannot be compared, it is incorrect to state that the melting points of both substances are identical. Also, the melting point is not higher for butane since octane has a higher melting point due to its higher molecular weight.
Learn more about Melting point here:
https://brainly.com/question/29578567
#SPJ11
Calculate the mass of a sphere of gold with a radius of 11.3 cm. (The volume of a sphere with a radius r is V = (4/3)πr3; the density of gold is 19.3 g/cm3.) Express the solution in grams and in scientific notation.
The mass of a sphere with a radius of 11.3 cm can be calculated using the equation M = V × ρ, where V is the volume of the sphere and ρ is the density of the material. The volume of a sphere with a radius r is V = (4/3)πr3 and the density of gold is 19.3 g/cm3, so we can calculate the mass of the gold sphere as:
M = (4/3)πr3 × 19.3 g/cm3 = (4/3) × 3.14 × 11.33 × 19.3 g/cm3
M = 8,683.29 g = 8.7 × 103 g (in scientific notation)
Read more about the topic of density:
https://brainly.com/question/1354972
#SPJ11
Oxidation of Alcohols: Practical Methods
1. a) State the reagents & conditions used in the oxidation of alcohols.
b) State the colour change observed for the oxidising agent.
2.a) Explain why oxidation of a primary alcohol under distillation produces an aldehyde whereas oxidation
under reflux produces a carboxylic acid. You could use ethanol oxidation as an example. Include
structural formulae in your explanation.
b) Which experimental set-up below would you use to:
i) oxidise ethanol to ethanoic acid?
ii) oxidise ethanol to ethanal?
2. For ea
drawin
a) ethanc
b) etha
c) pre
Answer:
1a) The most common reagents used for the oxidation of alcohols are potassium permanganate (KMnO4), chromic acid (H2CrO4), and potassium dichromate (K2Cr2O7). Other oxidizing agents include sodium hypochlorite (NaOCl), pyridinium chlorochromate (PCC), and Jones reagent (CrO3/H2SO4). The conditions vary depending on the reagent used, but generally, the reaction is carried out under acidic or basic conditions and at elevated temperatures.
b) The oxidizing agents generally have a distinctive color, and their color changes during the reaction. For example, potassium permanganate is purple in its initial state, but it turns brown when it is reduced. Similarly, potassium dichromate is orange, but it changes to green when it is reduced.
2a) When a primary alcohol is oxidized, it can produce either an aldehyde or a carboxylic acid, depending on the reaction conditions. When the oxidation is carried out under distillation conditions, the aldehyde is formed as the reaction intermediate, which is then distilled off before it can be further oxidized to a carboxylic acid. On the other hand, when the oxidation is carried out under reflux conditions, the aldehyde is in equilibrium with the carboxylic acid, and the carboxylic acid is formed as the major product. For example, when ethanol is oxidized using potassium dichromate in acidic conditions:
Under distillation conditions:
CH3CH2OH + [O] → CH3CHO + H2O
Under reflux conditions:
CH3CH2OH + 2[O] → CH3COOH + H2O
b) i) The experimental set-up to oxidize ethanol to ethanoic acid would involve refluxing ethanol with an excess of potassium dichromate in acidic conditions.
ii) The experimental set-up to oxidize ethanol to ethanal would involve distilling a mixture of ethanol and a limited amount of oxidizing agent, such as pyridinium chlorochromate or Jones reagent, at a temperature that is lower than the boiling point of ethanal.
See the attached image for the requested drawings of ethane, ethanol, and propanone.
(please could you kindly mark my answer as brainliest)
Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols. chemical reaction? situation chemical equation A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. yes no A strip of solid iron metal O yes is put into a beaker of 0.051M PdC2 solution. O no
A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)A strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
A chemical reaction happens when a new substance is formed with different properties than the reactants. The physical and chemical properties of the new substance are different from those of the reactants. The chemical equation represents the chemical reaction.
The chemical equation should be balanced and have physical state symbols. A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)The balanced chemical equation is: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)
The reactants are palladium metal and ferrous sulfate. The product is palladium sulfate and iron metal. The physical state of the reactants and products is as follows: Pd(s) - SolidFeSO4(aq) - AqueousPdSO4(aq) - AqueousFe(s) - SolidA strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
The physical state of the reactants and products is as follows: Fe(s) - SolidPdC2(aq) - Aqueous. The reactants are iron metal and palladium dichloride. However, a chemical reaction does not happen.
To know more about chemical reaction, refer here:
https://brainly.com/question/31139804#
#SPJ11
determine whether each observation generally corresponds to a physical change or a chemical change. a liquid freezes into a solid. choose... a solution heats up upon mixing with another. choose... a solid dissolves into water. choose... the color of a substance changes over time. choose... bubbles are produced upon mixing two solutions. choose... a precipitate is formed from two solutions. choose...
The observation which corresponds to physical change are a liquid freezes into a solid and a solid dissolves into water.
The observation which corresponds to chemical change are a solution heats up upon mixing with another, the color of a substance changes over time, bubbles are produced upon mixing two solutions, and a precipitate is formed from two solutions.
When it comes to determining whether each observation corresponds to a physical change or a chemical change:
1. A liquid freezes into a solid corresponds to a physical change.
The explanation for this is that physical changes occur when the form of the substance alters, but the chemical composition of the substance stays the same. Because the liquid's chemical composition does not alter during the process of freezing, it is classified as a physical alteration.
2. A solution heats up upon mixing with another corresponds to a chemical change.
A chemical change is one in which the composition of the substance changes. This is most commonly accomplished through a chemical reaction, which is when the original molecules are transformed into new molecules. In this instance, when two solutions are combined and heat is generated, a chemical reaction is occurring.
3. A solid dissolves into water corresponds to a physical change.
The explanation for this is that the process of dissolving a solid into water does not alter the chemical composition of the solid. Instead, the solid's particles are separated by the water particles, resulting in a homogenous solution. Because the chemical composition remains constant, it is classified as a physical change.
4. The color of a substance changes over time corresponds to a chemical change.
This alteration is often linked to a chemical reaction. When a substance's color changes over time, it is frequently due to the presence of a different substance. As a result, the chemical composition of the original substance is altered. As a result, it is classified as a chemical alteration.
5. Bubbles are produced upon mixing two solutions corresponds to a chemical change.
This alteration is often linked to a chemical reaction. When two substances combine and produce bubbles, it is usually the result of the generation of a new gas. As a result, the original molecules have transformed, resulting in a new substance. As a result, it is classified as a chemical alteration.
6. A precipitate is formed from two solutions corresponds to a chemical change.
When two solutions are combined, they frequently react to form a precipitate. This indicates that a new substance has been produced, and the original substance's composition has been altered. As a result, it is classified as a chemical alteration.
Learn more about Chemical change:
https://brainly.com/question/11370755
#SPJ11
What is the relationship of the two compounds in each of the following pairs? identical conformational isomers enantiomers diastereomers structural isomers identical conformational isomers enantiomers diastereomers structural isomers
It is important to note that terms "identical conformational isomers" and "enantiomers" are mutually exclusive, as identical conformational isomers have the same orientation of all atoms in space, while enantiomers have mirror-image orientation of all chiral atoms.
Identical conformational isomers: These are molecules that have same atomic connectivity but differ only in way their atoms are oriented in space. Enantiomers: These are mirror images of each other and are non-superimposable. They have the same chemical and physical properties, except for their interaction with plane-polarized light. Diastereomers: These are stereoisomers that are not mirror images of each other and have different physical and chemical properties. Structural isomers: These are molecules that have same molecular formula but differ in their atomic connectivity.
To know more about Enantiomers, here
brainly.com/question/21506956
#SPJ4
A chemist heats the block of gold as shown in the interactive, then places the metal sample in a cup of oil at 25.00 °C instead of
a cup of water. The temperature of the oil increases to 26.52 °C. Calculate the mass of oil in the cup. The specific heat of gold is
0.129 J/g °C and the specific heat of oil is 1.74 J/g °C.
moil =
$
4
d
%
5
<
6
MacBook Air
FG
&
7
3
F7
00 *
8
DII
FB
9
DD
F9
O
4
F10
4
F11
+ 11
Do
8
√3)
F12
What are the products and balanced equation for 2K(s) + ZnCl2(aq)
The products of the reaction between 2K(s) and ZnCl2(aq) are aqueous potassium chloride (KCl) and solid zinc (Zn), and the balanced chemical equation is 2K(s) + ZnCl2(aq) → 2KCl(aq) + Zn(s).
The balanced chemical equation for the reaction between 2K(s) and ZnCl2(aq) is:
2K(s) + ZnCl2(aq) → 2KCl(aq) + Zn(s)
In this reaction, potassium (K) reacts with zinc chloride (ZnCl2) to form potassium chloride (KCl) and solid zinc (Zn).
A balanced equation is a representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation. In other words, the total mass and charge of the reactants must be equal to the total mass and charge of the products. To balance an equation, one must adjust the coefficients in front of the chemical formulas of the reactants and products.
This is done by using the laws of conservation of mass and charge. For example, if there are two atoms of oxygen on one side of the equation, there must be two atoms of oxygen on the other side as well. A balanced equation is important because it provides a clear understanding of the stoichiometry of a chemical reaction. This information is crucial for determining the amounts of reactants needed to produce a certain amount of product, as well as for predicting the products of a given reaction.
To learn more about Balanced equation visit here:
brainly.com/question/12405075
#SPJ4
explain why the optimum ratio that you found through the loudness test was the best ratio of oxygen to hydrogen
Answer:
The optimum ratio found through the loudness test represents the ratio of oxygen to hydrogen where the most efficient combustion occurs. When hydrogen and oxygen combine in the correct ratio, a chemical reaction occurs that produces a loud "pop" sound and releases energy in the form of heat and light.
The balanced chemical equation for the reaction between hydrogen and oxygen is:
2H2 + O2 -> 2H2O
This equation shows that two molecules of hydrogen react with one molecule of oxygen to produce two molecules of water. If there is not enough oxygen present, the reaction will be incomplete and unreacted hydrogen will remain. If there is too much oxygen present, the excess oxygen will not react and will simply be wasted.
Therefore, the optimum ratio of oxygen to hydrogen is the ratio where all of the hydrogen is completely reacted with the oxygen, and no excess oxygen is present. This ensures the most efficient combustion and the maximum release of energy in the form of heat and light.
2 PLS Question 2 Consider the chemical reaction: Fe3+ (aq)+ SCN (aq) Fe(SCN)2(aq) According to Le Chatelier's Principle, if the reaction is at equilibrium which of the following disturbance(s) will shift the reaction to the right? (There could be more than one correct answer, select all that are TRUE to receive credit) Increase the concentration of Fe3(aq) Decrease the concentration of Fe(SCN)2(aq) Increase the concentration of Fe(SCN)2(aq) Decrease the concentration of Feaq) Decrease the concentration of SCN () Increase the concentration of SCN'(),
The disturbances needed to shift the reaction to the right, according to Le Chatelier's Principle, are to increase the concentration of Fe3+ (aq), decrease the concentration of Fe(SCN)2 (aq), increase the concentration of SCN- (aq), and decrease the concentration of Fe(aq). Le Chatelier's Principle states that if a chemical reaction is at equilibrium, any disturbance that occurs in the reaction will be compensated by a shift in the equilibrium in the opposite direction so as to re-establish the equilibrium. In this case, the reaction is Fe3+ (aq) + SCN- (aq) = Fe(SCN)2 (aq).
In order to shift the reaction to the right (i.e. increase the amount of products) the following disturbances must occur: increase the concentration of Fe3+ (aq), decrease the concentration of Fe(SCN)2 (aq), increase the concentration of SCN- (aq), and decrease the concentration of Fe(aq). Any other disturbance will not have an effect on the reaction, as it is already at equilibrium
The rationale behind these disturbances is that they are all designed to increase the amount of reactants. An increase in the concentration of Fe3+ (aq) will provide more of the reactant needed to produce the product, while a decrease in the concentration of Fe(SCN)2 (aq) will reduce the amount of the product and thus drive the reaction towards the reactants.
Know more about Le Chatelier's Principle here:
https://brainly.com/question/29009512
#SPJ11