In order to dissolve a chemical sample in a recrystallization solvent, add the room-temperature solvent ___________ in an Erlenmeyer flask on a hot plate. Turn on the heat, starting at __________________. Using a _______, add additional solvent from a second container on the heat source. Swirl the sample flask after each addition, and try to add _______________ in order to dissolve the solid.

The energy of light with a wavelength of 589 nm is approximately 3.36 × 10^(-19) Joules.

To calculate the energy of light, we can use the equation E = hc/λ, where E represents the energy, h is Planck's constant (6.626 × 10^(-34) J·s), c is the speed of light in a vacuum (3.00 × 10^8 m/s), and λ is the wavelength of light.

Given that the wavelength is 589 nm (which is equivalent to 589 × 10^(-9) m), we can substitute the values into the equation:

E = (6.626 × 10^(-34) J·s × 3.00 × 10^8 m/s) / (589 × 10^(-9) m)

Simplifying the equation, we get:

E = (1.9778 × 10^(-25) J·m) / (5.89 × 10^(-7) m)

Dividing these values, we find:

E ≈ 3.36 × 10^(-19) J

For more such questions on energy

https://brainly.com/question/30128198

#SPJ11

Answer:

Comets are small, icy objects that have very elliptical orbits. When they are close to the Sun, they form comas and tails, which glow and make the comet more visible.

Explanation:

Hope This Helps!!

(brainliest please, if possible)

Answer:

comet's

Explanation:

what the other user said

Answer:

The molarity of Carl's sugar solution can be calculated using the formula:

Molarity = moles of solute / liters of solution

First, we need to determine the number of moles of sucrose in the solution. We can do this using the formula:

moles = mass / molar mass

The mass of sucrose is 400 grams, and the molar mass is 342.3 g/mol:

moles = 400 g / 342.3 g/mol

moles = 1.167 mol

Now we can calculate the molarity by dividing the moles by the liters of solution (which is 1.00 L):

Molarity = 1.167 mol / 1.00 L

Molarity = 1.2 M

Therefore, the molarity of Carl's sugar solution is 1.2 M. Answer: 1.2 M.

Explanation:

Answer:8.18 moles C

Explanation:

98.22g x 1 mole C/ 12.011g = 8.18 moles C

Answer:

D is correct

Explanation:

EDG 2021

Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

option A.

Boyle's law states that pressure of a given mass of a gas is directly proportional to its volume provided, temperature of the gas is kept constant.

Le Chatelier's Principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.

So the experimental plans that will test the effects of pressure on a reaction with gases and its expected result is keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

Thus, option A is the correct answer.

Learn more about pressure of reaction here: https://brainly.com/question/30917518

#SPJ1

Answer:

Pretty sure it's C

Explanation:

The diagram shows a picture of a compound.

A compound is a substance that is made up of two or more different elements that are chemically bonded together in a specific ratio.

This means that the elements are combined in a way that creates a new substance with different physical and chemical properties than the individual elements.

Compounds can be formed through a variety of chemical reactions, such as combining elements through a chemical bond or through a reaction between an acid and a base.

So for the given diagram, we can see that it represents two or more elements chemically combined.

Learn more about a compound here: https://brainly.com/question/29108029

#SPJ1

Answer:

Explanation:

pOH = -log1.36 X 10^-10 = 9.87

pH = 14-pOH = 14-8.97 = 5.03

Answer:

I guess correct option is A.

Answer:

Hydrogen H 3.330% Carbon C 26.450% Oxygen O 35.234%

Explanation:

Answer:

Likely Xenon, [tex]\rm Xe[/tex].

Explanation:

The average kinetic energy of particles of a gas at a given temperature and pressure should be the same (regardless of the exact composition of the particle.)

For example, let [tex]m_1[/tex] and [tex]m_2[/tex] denote the mass of each particle of two gases, and let [tex]v_1[/tex] and [tex]v_2[/tex] denote the average speed of particles of each gas.

Average kinetic energy of particles of the first gas: [tex]\displaystyle {\rm KE_1} = \frac{1}{2}\, m_1 \cdot ({v_1})^{2}[/tex].

Average kinetic energy of particles of the second gas: [tex]\displaystyle {\rm KE_2} = \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].

If the temperature of these two gases are the same, [tex]\rm KE_1 = KE_2[/tex]. Hence:

[tex]\displaystyle \frac{1}{2}\, m_1 \cdot ({v_1})^{2}= \frac{1}{2}\, m_2 \cdot ({v_2})^{2}[/tex].

[tex]\displaystyle \frac{v_1}{v_2} = \frac{\sqrt{m_2}}{\sqrt{m_1}}[/tex].

In other words, the average velocity of particles of each gas (at the same temperature and pressure) is inversely proportional to the square root of the mass of one particle of each gas.

Similarly, at the same temperature and pressure, particles of the four gases in this question would have the same average kinetic energy. However, the gas with the largest per-particle mass would have the slowest average velocity for its particles.

Look up the relative atomic mass of the particles:

Calculate the formula mass of each gas. That value would be proportional to the average mass of each particle of the gas:

Among these four gases, each particle of xenon, [tex]\rm Xe[/tex], has the largest per-particle mass. Hence, at the same temperature and pressure, particles of Xenon would have the slowest average velocity among these gases.

Answer:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Explanation:

To know the the correct answer to the question, do the following:

Case 1: Let the circuit A and B have equal voltage say 24 V.

For Circuit A:

Voltage (V) = 24 V

Resistance (R) = 7.5 ohms

Current (I) =?

V = IR

24 = I × 7.5

Divide both side by 7.5

I = 24 / 7.5

I = 3.2 A

For Circuit B:

Voltage (V) = 24 V

Resistance (R) = 5 ohms

Current (I) =?

V = IR

24 = I × 5

Divide both side by 5

I = 24 / 5

I = 4.8 A

Thus for the same voltage, current in circuit A is less than the current in B.

Case 2: Let circuit A and B have equal current say 2 A

For circuit A:

Current (I) = 2 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 2 × 7.5

V = 15 V

For Circuit B:

Current (I) = 2 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 2 × 5

V = 10 V

Thus, for the same current, the voltage in circuit A is greater than the voltage in B

Case 3: Let circuit A have a current of 4 A and circuit B have a current of 5 A

For circuit A:

Current (I) = 4 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 4 × 7.5

V = 30 V

For circuit B:

Current (I) = 5 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 5 × 5

V = 25 V

Thus, when the current in circuit A is less than the current in circuit B, the voltage in circuit A is greater than the voltage in circuit B.

From the illustrations above and the options given in the question, the current answer is:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Answer:

Part A: Protonation, Protonation

Part B: An elimination, A substitution

Explanation:

The dehydration ethanol and the condensation of ethanol all begin from the protonation of ethanol. This is because, water is a good leaving group. Thus, the protonation of the -OH moiety of the molecule is the first step in each mechanism.

The dehydration of ethanol is an elimination reaction because it involves the loss of H-O-H from the ethanol molecule while the condensation of ethanol is an substitution reaction because the -OH moiety is replaced by -OCH2CH3.

Answer:

carbon

Explanation:

I hope this helps :)

Answer:

carbon

Explanation:

YOU CAN MARK ME AS BRAINIEST IF YOU WANT

Answer:

Sulfur needs 2 more electrons to achieve octet in its valence shell.

Explanation:

According to the electronic configuration, 2 electrons are required to be gained by the sulfur to achieve the octet rule.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.

Learn more about electronic configuration,here:

https://brainly.com/question/29757010

#SPJ6

If the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77 and the solution is basic.

To calculate the pOH of a solution, we can use the formula:

pOH = -log[OH-]

Given that the [OH-] concentration is 5.9 x 10^(-M), we can substitute this value into the formula:

pOH = -log(5.9 x 10^(-M))

Calculating this expression, we find:

pOH = -log(5.9 x 10^(-M))

pOH ≈ -log(5.9) + (-log(10^(-M)))

Since log(10^(-M)) is equal to -M, the equation simplifies to:

pOH ≈ -log(5.9) - M

Now, we need the value of M (the exponent) to calculate the exact pOH value. It appears that the value of M is missing in the given information. However, assuming M is a positive value, we can continue the calculation.

If we consider M = 6, for instance, the equation becomes:

pOH ≈ -log(5.9) - 6

Now, we can evaluate the expression:

pOH ≈ 1.23 - 6

pOH ≈ -4.77

Therefore, if the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77.

To determine whether the solution is acidic, basic, or neutral, we can use the relationship between pH and pOH. The sum of the pH and pOH of a solution at 25°C is always equal to 14.

Since pOH = -4.77, the pH would be:

pH = 14 - pOH

pH ≈ 14 - (-4.77)

pH ≈ 18.77

A solution with a pH above 7 is considered basic. In this case, the calculated pH is greater than 7. Therefore, the solution is basic.

for more questions on pOH
https://brainly.com/question/1420583
#SPJ11

Answer:

NH3

Explanation:

The "tri" attached to the trihydride means 3. So your hydrogen is going to have 3 atoms.

Answer:

All Answers only for the elite; Nomenclature of Covalent Compounds Quiz

You're Welcome :)

Explanation:

A-hydrochloric acid

B-sulfuric acid

C-dinitrogen pentoxide

C- IBr3

A- carbon dioxide

B- Start the name with hydro-.

B- H3BO3

C-sulfur trioxide

A- NH3

B- The chemical name ends with “hydroxide.”

Answer:

The Answer will be provided below, please pay attention in class next time so that you don't have to be in a hurry like you are in now.

Explanation: The correct option is:

Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does pollute the atmosphere, while using Earth's wind does not. Both fossil fuels and wind energy contribute to climate change, but the use of fossil fuels is much more damaging to the environment than the use of wind power.

Fossil fuels are non-renewable sources of energy that are formed over millions of years by the decomposition of organic matter. They release harmful greenhouse gases when burned, contributing to climate change. In contrast, wind energy is a renewable source of energy that uses turbines to harvest the power of wind. Wind energy does not produce any emissions, making it an environmentally friendly alternative to fossil fuels. While wind turbines can have some impacts on wildlife and habitats, the impact is much less severe than the effects of fossil fuel extraction and burning.

Added Part: Fossil fuels are non-renewable sources of energy that are derived from the remains of plants and animals that died millions of years ago. These sources include coal, oil, and natural gas. Wind energy, on the other hand, is a renewable source of energy that is generated by the kinetic energy of wind.

Here are some comparisons between fossil fuels and wind energy:

Environmental Impact: Fossil fuels have a significant negative impact on the environment. Burning fossil fuels produces greenhouse gases that contribute to climate change. The extraction of fossil fuels also has negative impacts on the air, water, and soil. Wind energy, however, has a very small environmental footprint. Wind turbines do not produce any emissions and do not require any water to generate electricity.

Energy Availability: Fossil fuels are abundant and have been the primary source of energy for decades. On the other hand, wind energy is a relatively new source of energy and the technology is still developing. However, the availability of wind energy is significant, as wind is a renewable source that is constantly available.

Sustainability: Fossil fuels are non-renewable, which means they will eventually run out. As the demand for energy continues to increase, the availability of fossil fuels will decrease. Wind energy is a renewable source of energy that will never run out.

Here are some pros and cons of both fossil fuels and wind energy:

Fossil Fuels:

Pros:

Reliable source of energy

High energy density

Large global infrastructure

Cons:

Non-renewable source of energy

Significant environmental impact

Price instability

Wind Energy:

Pros:

Renewable source of energy

Small environmental footprint

Low operating costs

Cons:

High initial costs for building wind turbines

Wind is an inconsistent source of energy

Can create noise pollution for surrounding communities

Answer: Atoms combine to make all the substances on Earth.

Explanation:

Atom is a smallest entity of any matter. The atoms of different elements combine together in order to form new substances. The atoms have electrons, neutrons, as well as protons. The atoms are combined by the chemical bond. When two or more atoms combine they form a molecule. The molecules combine to form compound. Atoms cannot be broken into sub parts. The two atoms of hydrogen and one of oxygen forms water which is an essential liquid on planet earth. Other substances like carbon dioxide, coal, and sodium chloride.

Answer:

Decomposition.

Explanation:

Decomposition Reactions T hose reactions in which a single substance (reactant) splits up into two or more simpler substances (products) are known as decomposition reactions. These reactions are carried out by supplying energy in form of heat, electricity or light which breaks that substance into simpler substances

The compound that contains sterogenic centre is the 1,3,4-trichloropentane. That is option F.

Sterogenic centers are found in compounds where a carbon atom share four bonds to the carbon atom with each to different elements or functional groups.

From the list of example given above, the carbon atom of which Ch the second chloride is attached to is sharing bonds with carbon, hydrogen, chloride and another carbon.

Learn more about atom here:

https://brainly.com/question/20994647

#SPJ1

Answer:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is used mostly regarded  as poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Explanation:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is mostly regarded as  poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Those structures that are similar in all behavior is called homologous structure.

The answer of the following question is as follows:-

For more information, refer to the link:-

https://brainly.com/question/15804584

Answer:

Yes

Explanation:

A silent mutation is a type of mutation that has no effect on protein function. This is because the mutation does not change the amino acid sequence of the protein.

Silent mutations can happen when a single base pair in the DNA is altered without changing the amino acid that the codon is meant to encode. For instance, a silent mutation could turn the initial G in the codon for the amino acid alanine from GCG to A, creating the codon GCA. The function of the protein is unaffected since the codon GCA still codes for the amino acid alanine.

The most frequent sort of mutation is a silent mutation, which can be brought on by a number of things, including mistakes in DNA replication, contact with environmental mutagens, and random chance. Silent mutations typically have no detrimental effects on the organism.

Learn more about silent mutations here : brainly.com/question/30280461

#SPJ1

The steps in the engineering process in order is D. Identifying a problem, brainstorming solutions, researching the background of each solution, testing solutions, choosing a solution, production, making future improvements.

The initial step involves recognizing the predicament that requires resolution. One may achieve this through collaborating with fellow engineers, consulting customers, or conducting studies. After recognizing the issue at hand, the subsequent course of action involves generating ideas or solutions to address it. One way to achieve this is to generate a large number of ideas.

The subsequent phase necessitates the experimentation of potential answers. To achieve this, one must take into account both the outcomes of the assessments and the advantages and disadvantages associated with every proposed resolution. The subsequent action entails generating the resolution. One way to accomplish this is to create a prototype, while another is to manufacture the solution in large quantities. The last stage involves enhancing forthcoming developments.

Find out more on the engineering process at https://brainly.com/question/19369851

#SPJ1

Answer:

The correct answer is B. equals mass divided by volume

Answer:

They were right, I got all the questions right. If you need answers I got them I guess?

Explanation:

Answer:

I don't think so for now, there hasn't been much research done with the vaccine and children so we really don't know how children's bodies will react to it. Once more studies are done with the vaccine and children and is proven safe then yes, kids should use it in order to attend public school.

Answer:

B) the freezing point decreases and the vapor pressure at 25°C decreases.

Explanation:

Colligative properties are those properties that depend on the amount of solute in solution. Both freezing point and vapour pressure are colligative properties.

As the number of nonvolatile solute particles increases, the freezing point of the solution decreases. This is known as freezing point depression.

Similarly, "Vapor pressure is a colligative property, so the vapor pressure of solutions is directly proportional to the amount of solute present in a solution. When a solute is present in a solvent, the vapor pressure is lowered because fewer solvent molecules are present at the top of the solution" (Lumen Learning).

Answer:

f u moderators

Explanation:

euurhtiuubbfjdhbgvzrbsf im sorry

Answer:

Yes

Yes

Yes

All yes

Explanation: