The (a) increase in the thermal energy of the block-floor system 139.3 J
(b), the maximum kinetic energy of the block 614.3 J
(c), and the original compression distance of the spring 0.625 m
(a) The increase in thermal energy of the block-floor system is equal to the work done by the friction force. This can be calculated using the equation
Work = Force × Distance,
where the friction force is equal to the coefficient of kinetic friction multiplied by the normal force, and the distance is equal to the stopping distance (7.7 m).
Therefore, the increase in thermal energy of the block-floor system is equal to
(0.296 x 4.4 kg x 9.8 m/s² x 7.7 m) = 139.3 J.
(b) The maximum kinetic energy of the block is equal to the kinetic energy of the block when it leaves the spring. This can be calculated using the equation
Kinetic Energy = ½ mv²,
where m is the mass of the block (4.4 kg) and v is the velocity of the block when it leaves the spring. This velocity can be found by using the equation
Force = Mass x Acceleration with the spring constant (640 N/m) and the mass of the block (4.4 kg).
Therefore, the maximum kinetic energy of the block is equal to
(0.5 x 4.4 kg x (640 N/m / 4.4 kg)²) = 614.3 J.
(c) The original compression distance of the spring can be found by using the equation
K.E (spring) 1/2 Kx² + Work done = 0
-1/2 * 640 N/m * x² + 99.93 J = 0
Solving for x, we get:
x = √(99.93 J / (1/2 * 640 N/m))
x = 0.625 m
Therefore, the original compression distance of the spring is 0.625 m.
Learn more about thermal energy here:
https://brainly.com/question/19666326
#SPJ11
what is the speed of an electron whose total energy is equal to the total energy of a proton that is at rest? (the proton mass is about 1836 times the mass of the electron.)
The speed of an electron whose total energy is equal to the total energy of a proton that is at rest would be zero.
Speed of an electronWe can use the conservation of energy to solve this problem, where the total energy of the electron is equal to the total energy of the proton at rest. The total energy of a particle is given by the sum of its kinetic energy and rest energy (mass-energy), which is given by Einstein's famous equation, E=mc^2.
The rest energy of the electron and proton can be neglected compared to their kinetic energies, which are given by 1/2 mv^2, where m is the mass and v is the speed of the particle.
Since the total energy of the electron is equal to the total energy of the proton at rest, we can equate their kinetic energies:
1/2 me * ve^2 = 1/2 mp * 0^2
where me is the mass of the electron, mp is the mass of the proton, and ve is the speed of the electron.
Using the fact that the proton mass is about 1836 times the mass of the electron (mp/me = 1836), we can solve for the speed of the electron:
ve^2 = (mp/me) * 0^2 = 0
Therefore, ve = 0. The speed of the electron whose total energy is equal to the total energy of a proton at rest is zero, which means that the electron is not moving.
More on the speed of electrons can be found here: https://brainly.com/question/30194771
#SPJ1
The half life of a radioactive substance is 5 hours. If 5g of the substance is left after 20 hours, determine the original mass of the substance
Answer:
The original mass of the substance was 10g.
Explanation:
The half-life of a radioactive substance is the amount of time it takes for half of the substance to decay. In this case, the half-life is 5 hours.
We can use the half-life formula to find the original mass of the substance:
N = N0 * (1/2)^(t/T)
where:
---N0 is the initial mass of the substance
---N is the remaining mass of the substance after time t
---T is the half-life of the substance
We know that after 20 hours, only half of the substance remains:
N = N0 * (1/2)^(20/5) = 0.5 * N0
If we solve for N0, we get:
N0 = N / 0.5 = 5g / 0.5 = 10g
Therefore, the original mass of the substance was 10g.
for a given mass of gas at constant temperature, the volume of the gas varies inversely with pressure.a. 3Pb. P/3c. 3P/Td. 9P
The volume of the gas varies inversely with pressure, and the correct answer is (b) P/3.
According to Boyle's Law, at a constant temperature, the volume of a gas is inversely proportional to its pressure. Mathematically, this can be expressed as:
PV = k
where P is the pressure of the gas, V is its volume, and k is a constant.
If we assume that the mass of the gas remains constant, then k is also constant. So we can write:
[tex]P_1V_1 = k and P_2V_2 = k[/tex]
where[tex]P_1 and V_1[/tex] are the initial pressure and volume, and [tex]P_2 and V_2[/tex] are the final pressure and volume.
If we divide these two equations, we get:
[tex]P_1V_1/P_2V_2 = 1[/tex]
Since[tex]V_1[/tex] is inversely proportional to [tex]P_1[/tex], we can write:
[tex]V_1 = k/P_1[/tex]
Similarly, [tex]V_2 = k/P_2.[/tex]
Substituting these values in the above equation, we get:
[tex](k/P_1)/(k/P_2) = 1[/tex]
Simplifying this, we get:
[tex]P_2/P_1 = V_1/V_2[/tex]
Since we are given that the temperature remains constant, we can assume that k is constant, and therefore:
[tex]V_1/P_1 = V_2/P_2[/tex]
If we let [tex]P_2 = 3P_1[/tex], then we get:
[tex]V_1/P_1 = V_2/(3P_1)[/tex]
Simplifying this, we get:
[tex]V_1/V_2 = 1/3[/tex]
for such more question on volume
https://brainly.com/question/14197390
#SPJ11
all but which condition must be present for the calvin cycle reactions to occur?
All but option A: the plant is exposed to light condition must be present for the Calvin cycle reactions to occur.
What is the Calvin cycle?The Calvin cycle is the biochemical process that takes place in the chloroplasts of plants, in which carbon dioxide is fixed into glucose molecules. This process involves several enzymes and molecules, but the energy needed to power the process comes from ATP and NADPH, which are produced during the light-dependent reactions that take place in the thylakoid membranes of the chloroplasts.
Therefore, light is required for the Calvin cycle to occur since it is the source of the energy that drives the reaction. However, all parts of the plant do not need to be exposed to light for the Calvin cycle to occur. Only the chloroplasts, which are found in the mesophyll cells of the plant, need to be exposed to light for photosynthesis to occur.
Learn more about Calvin cycle from
https://brainly.com/question/920840
#SPJ1
See full question below
all but which condition must be present for the calvin cycle reactions to occur?
The plant is exposed to light
water is not involved in any of the reactions
light energy is converted into chemical energy
provide the electrons needed to reduce NADP
why is an image recorded with a ccd better for astronomers than an image recorded on photographic film or plates?
The image recorded with a CCD (Charge Coupled Device) is better for astronomers than an image recorded on photographic film or plates because a CCD can detect more light and smaller details.
Additionally, CCDs can be read and reset electronically and can produce an image very quickly compared to a film or plate. An image recorded with a CCD is better for astronomers than an image recorded on photographic film or plates because of the following reasons:
CCD (Charge-Coupled Device) sensors, unlike photographic films or plates, have a far more linear response to light. They can handle a higher number of photons per square inch without the contrast distortion, graininess, or noise produced by films.CCD detectors, unlike photographic films or plates, are sensitive to a broader range of light frequencies. They can capture infrared, ultraviolet, and other light frequencies that film can't, allowing astronomers to see the "invisible" or "hidden" areas of space. CCDs are also more sensitive and can detect fainter signals from distant celestial bodies.The high sensitivity of CCD detectors allows them to capture images in far less time than photographic plates or film. Since exposure time is frequently limited by atmospheric interference and telescopic motion, this is critical in astronomy.CCDs, unlike photographic films or plates, don't need to be developed. Astronomers can look at their data instantly, reducing the amount of time it takes to evaluate data by many weeks or even months.
Since CCDs record digital data, they can be adjusted after the fact, making it easier to eliminate or reduce noise, manipulate contrast and brightness, and improve resolution.
To know more about Charge Coupled Device please visit :
https://brainly.com/question/13047592
#SPJ11
the three bins represent three important properties of stars. What are the items that we must measure in orrder to determine each property into the three bins.
Luminosity ________
Surface Temperature________ Mass________
To determine each property in the three bins, certain items must be measured. The luminosity, surface temperature, and mass are the three important properties of the stars represented by three bins.
The measurement for each property is as follows:
For luminosity: To measure luminosity, we must measure the total amount of energy a star emits in all wavelengths.
For surface temperature: Surface temperature is determined by analyzing the spectrum of light emitted by the star.
The spectrum shows a rainbow of colors, and some colors will be more intense than others. These colors can be used to estimate the temperature of the star's surface.
For mass: Mass is calculated using observations of how the star interacts with its surroundings. Astronomers observe the gravitational effect that a star has on other objects around it. The mass of a star can be estimated using this method.
Stars are gigantic balls of burning gas that light up the sky and heat up planets around them. The sun is a star, for example.
Some stars are smaller and some are larger, but all of them share the same basic structure. The enormous nuclear furnace at the center of every star produces heat and light through fusion.
Stars are made up of mostly hydrogen and helium, but they contain small amounts of other elements. They are classified into three categories based on their luminosity, surface temperature, and mass.
To learn more about stars:https://brainly.com/question/13018254
#SPJ11
If five vectors were added tail-to-tip and they ended up where they started from, what would be the magnitude and direction of R?
When five vectors are added tail-to-tip and they end up where they started from, the magnitude and direction of R are zero.
What are vectors?
A vector is a quantity that has a magnitude (or length) and direction. It is typically represented by an arrow, with the length of the arrow representing the magnitude of the vector and the arrowhead indicating the direction in which the vector points. Vectors can be added or subtracted to create new vectors.
When vectors are added, they must be placed head-to-tail or tail-to-tip. In other words, the tail of one vector must be placed at the head of the previous vector to create a chain. The resulting vector is called the resultant vector and can be found by drawing a straight line from the tail of the first vector to the head of the final vector.
The magnitude of a vector is the length of the arrow that represents the vector. It is typically represented by the letter "R". So when five vectors are added tail-to-tip and they end up where they started from, the magnitude and direction of R are zero.
To know more about vectors:
https://brainly.com/question/12937011
#SPJ11
Are car tires considered insulators or conductors? Why?
Car tires are generally considered insulators because they have a very high resistance to the flow of electricity. Insulators are materials that do not allow electric current to flow through them easily.
A substance that conducts heat or energy poorly is known as an insulator. It is a material that has a high electrical resistance, which means that it resists the passage of electric current through it. In electrical circuits, insulators are used to isolate conductors from one another and stop electricity from flowing between them.
Since it prohibits electrons from moving easily through it and has a very high resistivity, the rubber used in car tires functions well as an insulator. This makes it difficult for electric current to pass through the tire, lowering the possibility of electric shock and helping to avoid static electricity buildup.
To know more about tires:
https://brainly.com/question/17407784
#SPJ4
A 1,600 kg car is moving at 22 m/s. How much work was done to accelerate it to this speed?
O 7.7 x 105 J
O 3.5 x 104 J
○ 3.9 × 105 J
O 1.5 x 106 J
!!! Urgent
The closest answer among the options given is 3.9 x 105 J. . An object can accelerate by increasing its speed, changing its direction, or both.
What is Acceleration?
Acceleration is the rate of change of velocity of an object over time. It is a vector quantity, meaning it has both magnitude and direction, and is expressed in units of meters per second squared (m/s^2) or feet per second squared (ft/s^2)
The work done to accelerate the car can be calculated using the kinetic energy formula:
K = 1/2 mv^2
Substituting the given values, we get:
K = 1/2 (1600 kg) (22 m/s)^2
K = 677,600 J
Therefore, the work done to accelerate the car to this speed is 677,600 J.
Learn more about Acceleration from given link
https://brainly.com/question/460763
#SPJ1
Observe and compare the forces acting on the turtle and the cat.
a turtle and a cat on the ground looking at each other and not moving
1. The forces are balanced on both animals because they are not moving.
2. The forces are unbalanced on both animals because they are not moving.
3. The forces are balanced on the turtle but unbalanced on the cat because it is heavier.
4. The forces are balanced on the cat but unbalanced on the turtle because the cat is larger.
The forces acting on the turtle and the cat when they are on the ground and not moving are balanced. Therefore, option 1 is the correct answer.
When the forces are balanced, the object is at rest or it will move at a constant speed in a straight line. In this case, both the turtle and the cat are on the ground and not moving. Therefore, the forces acting on both of them are balanced.
Unbalanced forces cause the object to accelerate or change direction. The magnitude and direction of the forces are not equal in unbalanced forces. Therefore, options 2, 3, and 4 are incorrect answers.
To learn more about force: https://brainly.com/question/12785175
#SPJ11
14 13 12 11 10
DIFFERENT TYPES OF ENERGY: MATCH THE DEFINITIONS
The energy which a body possesses
by virtue of being in motion.
DRAG FROM HERE
ENERGY
JOULES
KINETIC
ENERGY
POTENTIAL
ENERGY
CONSERVATION
OF ENERGY
The law which states energy cannot
be created or destroyed.
The energy held by an object because of
its position relative to other objects,
stresses within itself, its electric charge,
or other factors
The ability to do work.
What energy is measured in.
D
Answer: Energy is the ability to do work.
Joules is what energy is measured in.
Kinetic energy is the energy which a body possesses by virtue of being in motion.
Potential energy is the energy held by an object because of its position relative to other objects, stresses, within itself, its electric charge, or other factors.
Explanation:
a 200 ohm resistor is connected to a 12 v car battery. if the resistor is then removed and connected to a battery with 6 v or potential difference, what happens to the current passing through the resistor?
When a resistor is connected to a battery with a lower voltage, the amount of current flowing through it would decrease.
What does a potential difference of 6 volts mean?R is the resistance applied through the 6 volt cell. We obtain by replacing values. As a result, the potential difference across the 6V cell is 8.4 V. The voltage is the difference in potential between two sites in an electric field. In an electric field, the current is the movement of charges between two sites.
According to Ohm's Law
I = V/R
The current flowing through a 200 ohm resistor attached to a 12 V automotive battery is:
I = V/R
= 12 V / 200 ohms
= 0.06 A
Applying Ohm's Law once more, the new current would be:
I = V/R
= 6 V / 200 ohms
= 0.03 A
Therefore, When a resistor is connected to a battery with a lower voltage, the amount of current flowing through it would decrease.
To know more about resistor visit:-
https://brainly.com/question/24297401
#SPJ1
an object is moving to the right in a straight line. the net force acting on the object is also directed to the right, but the magnitude of the force is decreasing with time. the object will
The object will decelerate over time, as the net force acting on it decreases. This is because the net force is the vector sum of all forces acting on the object.
What is the effect on object?When an object is moving to the right in a straight line, and the net force acting on the object is also directed to the right, it means that there is no opposing force to halt its motion.
Therefore, the object will continue to move to the right in a straight line with constant speed since there is no change in the magnitude of the net force.
However, when the net force is directed to the right and is decreasing with time, the object's motion will be altered. The magnitude of the force is decreasing with time, so there will be less force acting on the object.
The force acting on the object is decreasing with time; thus, the object's acceleration will be less than before. As a result, the velocity of the object will decrease with time. Since there is no force opposing the motion, the object will continue to move to the right but with decreasing speed due to the decrease in net force acting on it.
Read more about force here:
https://brainly.com/question/12785175
#SPJ11
A resistor, R, is connected to a combination of three batteries as shown. The polarity of E is opposite that of the other two batteries.
Photo!
In a three battery combination whose second resistor is opposite in polarity of the other two, the Σε and Σr are 24 V and 14 Ω respectively.
How to calculate resistor and voltage?Begin by finding the equivalent voltage and resistance of the circuit:
Since ε₂ is in the opposite direction, subtract it from the other two voltages:
∑ε = ε₁ + ε₃ - ε₂ = 12 V + 18 V - 6 V = 24 V
To find the equivalent resistance, first combine the 6 Ω and 12 Ω resistors in parallel:
1/Rp = 1/6 Ω + 1/12 Ω = 1/4 Ω
Rp = 4 Ω
Then combine the 4 Ω resistor in series with the 10 Ω resistor:
R = 4 Ω + 10 Ω = 14 Ω
Therefore, ∑ε = 24 V and ∑r = 14 Ω.
Learn more on resistor here: https://brainly.com/question/24858512
#SPJ1
how long does it take the moon to make one complete rotation around the earth?
Which of the following best approximates the percentages of sand, clay, and silt in a silty loam? Use the soil texture table below to answer.(picture is at the bottom)Public DomainSand 10Clay 25Silt 65Sand 70Clay 10Silt 20Sand 20Clay 60Silt 20Sand 30Clay 10Silt 60'
The correct option iD. Sand 20% Clay 20% Silt 60% best approximates the percentages of sand, clay, and silt in a silty loam.
Soil texture is the roughness or softness of soil or soil particles. Soil texture can either be smooth/soft or rough soil texture. The soil texture table helps to determine the percentages of sand, clay, and silt in a silty loam. Among the given options, the best approximation for the percentages of sand, clay, and silt in a silty loam is 20% sand, 60% silt, and 20% clay. Therefore, the correct option for the question is option D. Sand 20% Clay 20% Silt 60%So, this is the answer to your question.
More on soil: https://brainly.com/question/8395005
#SPJ11
The figure shows a thin rod of length L with total charge Q. Find an expression for the electric field strength at point P on the axis of the rod at distance R from the center. (It is not necessary to evaluate any integrals as long as they are set up carefully and each component is clearly defined.)
According to the given figure, we can observe that a rod of length L with total charge Q is there. We need to find the expression for the electric field strength at point P on the axis of the rod at distance R from the center.
The electric field strength at point P on the axis of the rod at distance R from the center is given by:
[tex]E= KQ/(R^{2}+(L/2)^{2})^{3/2}[/tex]
Where, k is Coulomb's constant, Q is the total charge on the rod, L is the length of the rod, R is the distance between the point P and the center of the rod.
The derivation is given below.
Consider a thin rod with length L and total charge Q.
The linear charge density λ is given by:
λ = Q/L
Consider a small element of length dx at a distance x from the center of the rod. The electric field due to this small element is given by:
dE = kλdx/[tex]x^{2}[/tex]
Using Pythagoras theorem, we have:
[tex](R^{2}+(x-L/2)^{2} =z^{2}[/tex]
Thus, z = sqrt(R2+(x-L/2)2)
The electric field due to this small element is given by:
dE = kλdx/[tex]z^{3}[/tex]dE = kλdx/([tex]R^{2}[/tex]+[tex](x-L/2)^{2}[/tex])3/2
The total electric field is obtained by integrating the electric field due to all the small elements from -L/2 to L/2.
E = ∫ dE from -L/2 to L/2
E = ∫kλdx/([tex]R^{2}[/tex]+[tex](x-L/2)^{2}[/tex])3/2 from -L/2 to L/2
E = kQ/[tex](R^{2} +(L/2)^{2})^{3/2}[/tex]
Therefore, the expression for the electric field strength at point P on the axis of the rod at distance R from the center is given by:
E = kQ/[tex]((R^2+(L/2)^2)^{3/2} )[/tex].
"electric field strength", https://brainly.com/question/30694944
#SPJ11
what is the minimum angular velocity (in rpm ) for swinging a bucket of water in a vertical circle without spilling any? the distance from the handle to the bottom of the bucket is 35 cm . express your answer in revolutions per minute.
The minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is 5.56 rpm.
The minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is given by the formula; Vmin=√g/R
where:
Vmin = minimum angular velocity (in rpm)g = acceleration due to gravity (9.81 m/s²)R = radius of the circular path or distance from the handle to the bottom of the bucket (35 cm)To express the answer in revolutions per minute, the radius of the circle must be converted to meters;R = 35 cm = 0.35 m
Substituting the values given above into the formula;
Vmin=√g/R Vmin=√9.81/0.35 Vmin = 5.56 rpmTherefore, the minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is 5.56 rpm.
Learn more about velocity: https://brainly.com/question/25749514
#SPJ11
a 2 kg glass ball moving due east collides with a 4kg lead ball moving in the same direction at the rate of 5 m/s. after the collision, the glass ball moves due west at 1 m/s and the lead ball moves due east at 12 m/s. what was the speed of the glass ball before the collision
The speed of the ball before the collision was 13 m/s.
According to the conservation of momentum,
Momentum = mass x velocity
For the two objects before the collision:
P1 = M1 x V1 = 2 kg x v m/s = 10 kg m/s
P2 = M2 x V2 = 4 kg x 5 m/s = 20 kg m/s
For the two objects after the collision:
P1' = M1 x V'1 = 2 kg x -1 m/s = -2 kg m/s
P2'= M2 x V'2 = 4 kg x 12 m/s = 48 kg m/s
Since the total momentum of the system is conserved, we have:
P1 + P2 = P1' + P2'
Substituting the values, we get:
2v + 4(5) = -2 + 48
2v + 20 = 46
2v = 26
v = 13 m/s
Therefore, the speed of the glass ball before the collision was 13 m/s.
Learn more about collision theory here:
brainly.com/question/20628781
#SPJ11
a car weighing 12,500 n starts from rest and accelerates to 83.0 km/h in 5.00 s. the friction force is 1350 n. find the applied force produced by the engine
The applied force for the engine will be 24,450 N.
The applied force produced by the engine for a car weighing 12,500 n starting from rest and accelerating to 83.0 km/h in 5.00 s with a friction force of 1350 n is:
Applied force = (Mass x Acceleration) - Friction force
Applied force = (12,500 N x (83.0 km/h / 5.00 s)) - 1350 N
Applied force = 25,800 - 1350 N
Applied force = 24,450 N
To learn more about force, click here:
https://brainly.com/question/12970081
#SPJ11
1. what is the difference between a mission and a vision? what are the 5 characteristics of a vision?
The main difference between a mission and a vision is that a mission defines a company's purpose, while a vision outlines its long-term goals.
What is the difference between a mission and a vision?The five characteristics of a vision are:
Inspiring: A vision should be inspiring and give people something to strive for. The primary difference between vision and mission is that the former defines the company's ultimate goal, whereas the latter outlines the company's strategic path to accomplishing that goal. A mission statement is a brief statement that summarizes an organization's core goal, competitive benefit, and guiding principles. It is a short, straightforward declaration of what a company intends to achieve in the long run.
A vision statement, on the other hand, is a forward-thinking declaration of where the company hopes to be in the future. It describes the company's aspirations and anticipations. In this answer, we will describe the five characteristics of a vision.
Five characteristics of a vision:
1. Clear and concise: A vision statement should be short, understandable, and to the point.
2. Realistic: It should be achievable while also being challenging.
3. Time-bound: It should have a timeframe within which it must be accomplished.
4. Flexible: It should be adaptable to shifting market dynamics, environmental conditions, or technological advancements.
5. Inspiring: It should motivate and engage staff, customers, and stakeholders.
Read more about vision here:
https://brainly.in/question/54671979
#SPJ11
if you apply a force of 10 n to a box and push it 10 m in 10 s, how much power did you deliver?responses
The power delivered by the person who applied a force of 10N to a box and pushed it 10 m in 10 s = 10 W
To determine the power delivered by the person who applied a force of 10N to a box and pushed it 10m in 10s can be determined by the formula,
P = W/t
Where
P denotes power,
W denotes work, and
t denotes time.
Therefore, power is given by the formula:
P = W/t = (F × s) / t
Here, F = 10 N (applied force)s
= 10 m (displacement)
t = 10 s (time taken)
Hence,
P = (10 N × 10 m) / 10 s
= 10N m / s
= 10 W
Therefore, the power delivered by the person who applied a force of 10N to a box and pushed it 10m in 10s is 10 W.
Learn more about power here: https://brainly.com/question/29800108
#SPJ4
A geosynchronous Earth satellite is one that has an orbital period of precisely 1 day. Such orbits are useful for communication and weather observation because the satellite remains above the same point on Earth (provided it orbits in the equatorial plane in the same direction as Earth’s rotation). The ratio r3T2 for the moon is 1.01×1018km3y2. Calculate the radius of the orbit of such a satellite. All work must be shown for full credit. The choices are: 2.75x10E3 km; 1.96x10E4km; 1.40x10E5km; 1.00x10E6km.
The radius of the orbit of such a satellite will be about 1.40 × 10⁵ kilometers.
What is the radius of orbit?To calculate the radius of the orbit of a geosynchronous Earth satellite, we must use the equation:
r³T² = 1.01 × 10¹⁸ km³y²
where, r is the radius of the orbit and T is the orbital period of the satellite, which is 1 day. We can rearrange the equation to calculate r, giving us:
r = (1.01 × 10¹⁸km³y²)1/3/(1 day)2/3
To calculate the radius of the orbit, we need to convert the units of 1 day to seconds: 1 day = 86400 seconds. We can substitute this into the equation:
r = (1.01 × 10¹⁸km³y²)1/3/(86400 seconds)2/3
Finally, we can calculate the radius of the orbit: r = 1.40 × 10⁵ km
Therefore, the radius of the orbit will be about 1.40 × 10⁵ km.
Learn more about Radius of orbit here:
https://brainly.com/question/12859535
#SPJ11
describe periscope.
Answer:
periscope, an optical instrument used in land and sea warfare, submarine navigation, and elsewhere to enable an observer to see his surroundings while remaining under cover, behind armor, or submerged.
Explanation:
Determine the necessary speed, with respect to Earth, for a rocket to escape if fired from various locations on Earth. Take into account the Earth's rotational speed (1 rev/day) and use 5 significant figures. (The escape velocity from the surface of the Earth is 11.182 km/s. The radius of the Earth is 6,380 km.) (a) Determine the necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator in a direction eastward _____ km/s (b) Determine the necessary speed, with respect to Earth, for a rocket to escape if fired in a westward direction at the equator. _____ km/s (c) Determine the necessary speed, with respect to Earth, for a rocket to escape if fired in a westward direction at 25° north latitude. ______ km/s (d) Determine the necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator vertically upward. ____km/s
The necessary speed with respect to the Earth for a rocket to escape if fired from the Earth at the equator in a direction eastward is 11.256 km/s. The necessary speed with respect to the Earth, for a rocket to escape if fired in a westward direction at the equator is 10.558 km/s.
What is the necessary speed?The necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator in a direction eastward will be
ve = 11.182 km/s
vr = 2πR/T
vr =2π(6,380 km)/(1 day)
vr = 464.7 m/s
vE= ve + vr = 11.182 km/s + 464.7 m/s = 11.256 km/s
The necessary speed with respect to Earth, for a rocket to escape if fired from the Earth at the equator in a direction eastward will be:
ve = 11.182 km/s
vr = 2πR/T
vr =2π(6,380 km)/(1 day)
vr = 464.7 m/s
vE = ve − vr = 11.182 km/s − 464.7 m/s
vE = 10.558 km/s
The necessary speed, with respect to Earth, for a rocket to escape if fired in a westward direction at 25° north latitude will be:
ve = 11.182 km/s
vr = 2πRcos(25°)/(1 day)
vr = 358.4 m/s
vE = ve − vr = 11.182 km/s − 358.4 m/s
vE = 10.599 km/s
The necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator vertically upward is 11.182 km/s. Since the Earth is a sphere, any vertical movement will not cause the rocket to gain any additional speed with respect to Earth.
Learn more about Escape velocity here:
https://brainly.com/question/30891462
#SPJ11
An object is 15 cm in front of a diverging lens with a focal length of 10 cm.
Part A
Use ray tracing to determine the location of the image.
Express your answer using two significant figures.
q =
Part B
Is the image upright or inverted?
Part C
Is the image real or virtual?
The image distance from the lens is calculated to be 6 cm.
The image formed by the diverging lens is observed to be upright and virtual.
The image distance is calculated using the following formula of lens,
1/v = 1/f - 1/u
where,
v is image distance
f is focal length
u is object distance
Focal length f is given as -10 cm as it is diverging.
Object distance u is given as 15 cm.
Putting in the values,
1/v = (-15-10)/150
1/v = -25/150
v = -6 cm
Thus, the image distance is calculated to be 6 cm. As the image is formed by diverging lens being upright and virtual.
To know more about lens:
https://brainly.com/question/13311255
#SPJ4
A small block with mass 0.0400 kg slides in a vertical circle of radius R = 0.500 m on the inside of a circular track. During one of the revolutions of the block, when the block is at the bottom of its path, point A, the normal force exerted on the block by the track has magnitude 3.95 N. In this same revolution, when the block reaches the top of its path, point B, the normal force exerted on the block has magnitude 0.680 N. How much work is done on the block by friction during the motion of the block from point A to point B?
The work done on the block by friction during the motion of the block from point A to point B is 2.49 J.
The normal force acting on the block at point A and point B is different. We can find the weight of the block at points A and point B using the following formula:
Weight = mg,
where m is the mass of the block and g is the acceleration due to gravity.
Weight at point A = m × g
Weight at point B = m × g
Now, the normal force acting on the block at point A is given as 3.95 N.
Therefore, we can write the equation for the weight and normal force as:
Weight at point A - Normal force at point A = m × a
Now, at point A, the acceleration acting on the block is the centripetal acceleration a = v²/R where v is the velocity of the block at point A.
We can write the equation for the weight and normal force as:
m × g - 3.95 = m × v²/R
Similarly, at point B, we can write the equation for the weight and normal force as:
m × g - 0.680 = m × v²/R
Now, we can solve both the equations for the velocity of the block at point A and point B:
Velocity at point A, v₁ = √(gR - 3.95/m)
Velocity at point B, v₂ = √(gR - 0.680/m)
The change in kinetic energy during the motion from point A to point B is given by:
∆KE = KE₂ - KE₁
= (1/2)mv₂² - (1/2)mv₁²
We know that work done, W = ∆KE
So, the work done on the block by friction during the motion of the block from point A to point B is given by:
W = (1/2)m(v₂² - v₁²)
Substituting the values in the above equation:
W = (1/2) × 0.0400 × ((√(9.81 × 0.500 - 0.680/0.0400))² - (√(9.81 × 0.500 - 3.95/0.0400))²)
W = 2.49 J
Therefore, the work done on the block by friction is 2.49 J.
Learn more about Friction here:
https://brainly.com/question/24338873
#SPJ11
Small aperture phone aperture stop doubly-telecentric full control over the light collection uniform across the entire field of view. furthermore it would allow resolution to be uniform across the same field of view.
True or False
The given statement "Small aperture phone aperture stop doubly-telecentric full control over the light collection uniform across the entire field of view. Furthermore it would allow resolution to be uniform across the same field of view" is False.
Aperture refers to the opening in a camera lens that regulates the amount of light that enters a camera. The camera aperture is determined by the size of the lens opening, which may be adjusted using a ring on the lens. The smaller the opening, the larger the f-number, which reduces the amount of light entering the camera.
Resolution refers to the ability of a lens to capture an image in detail. The resolution of an image is measured in pixels, and it is directly proportional to the number of pixels in the image. The resolution of an image is determined by the size of the camera sensor, the pixel density, and the quality of the lens.
Doubly telecentric lenses are those that have a telecentric entrance pupil, a telecentric exit pupil, or both. The telecentric entrance pupil implies that the aperture stop is located at the entrance pupil's location. The telecentric exit pupil implies that the pupil is located at the aperture stop's location. The doubly telecentric means that both the entrance and exit pupils are at the same location. As a result, the lens is able to provide sharp images with uniform resolution across the entire field of view.
The given statement, "Small aperture phone aperture stop doubly-telecentric full control over the light collection uniform across the entire field of view. Furthermore it would allow resolution to be uniform across the same field of view" is False.
Learn more about Aperture and Resolution at : https://brainly.com/question/30389395
#SPJ11
How long will be required for a car to go from a speed of 20. 0 m/s to a speed of 25. 0 m/s if the acceleration is 3. 0 m/s2?
It will take approximately 1.67 seconds for the car to go from a speed of 20.0 m/s to a speed of 25.0 m/s if the acceleration is 3.0 m/s².
[tex]v = u + at[/tex]
Given:
u = 20.0 m/s (initial velocity)
v = 25.0 m/s (final velocity)
a = 3.0 m/s² (acceleration)
Rearranging the equation, we get:
[tex]t= \frac{(v - u)}{a}[/tex]
Substituting the given values:
t = [tex]\frac{(25.0 m/s - 20.0 m/s)}{3.0 m/s^{2} }[/tex]
t = 1.67 s
Speed is the measure of the rate at which an object moves. It is defined as the distance an object travels per unit of time. Speed is a scalar quantity and is expressed in units of distance per unit of time, such as meters per second (m/s) or kilometers per hour (km/h). It is important to note that speed does not tell us anything about the direction of motion or any changes in direction. This is where velocity comes in, which is a vector quantity that includes both speed and direction.
Speed can be either average or instantaneous. Average speed is the total distance traveled divided by the total time taken, while instantaneous speed is the speed at a particular instant in time. Speed can also be described in terms of velocity, which includes direction as well as magnitude.
To learn more about Speed visit here:
brainly.com/question/28224010
#SPJ4
A 4.50kg crate is suspended from the end of a short vertical rope of negligible mass. An upward force F(t) is applied to the end of the rope, and the height of the crate above its initial position is given by y(t) = (2.80m/s )t +(0.61m/s^3 )t^3 What is the magnitude of the force F when 3.60s ?
We know that Fg = mg = 4.5 kg * 9.8 m/s² = 44.1 NTherefore, F(t) = F_net + Fg = 1.5525 N + 44.1 N = 45.6525 NThe magnitude of the force F when t = 3.60 s is 45.65 N.Given,The mass of the crate, m = 4.5 kgHeight of the crate above its initial position, y(t) = (2.80m/s )t + (0.61m/s³)t³Let F(t) be the force applied upward on the rope.The upward force F(t) acting on the crate = Weight of the crate - Tension in the ropeTension in the rope is because of the force applied upward.
Therefore,Tension in the rope, T = F(t) - mgWhere g is the acceleration due to gravity= 9.8 m/s²Let's differentiate the given height of the crate equation to obtain the velocity of the crate above its initial position, dy(t)/dt.dy(t)/dt = (2.80m/s) + 3(0.61m/s³)t²We can determine the velocity of the crate at t= 3.60s by substituting the value of t = 3.60s. dy(3.60s)/dt = (2.80m/s) + 3(0.61m/s³)(3.60s)² = 16.34 m/sFrom the equation of motion, v² = u² + 2asWhere v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance.The initial velocity, u = 0m/s.The distance traveled by the crate when the force is applied, s = (2.80m/s)t + (0.61m/s³)t³ = (2.80m/s)(3.60s) + (0.61m/s³)(3.60s)³ = 23.63 mThe acceleration, a = (v² - u²)/2s = (16.34m/s²)/47.26m = 0.345 m/s²The net force, F_net = maWhere m is the mass of the crate and a is the acceleration of the crate due to the applied force F(t).F_net = m * a = 4.5kg * 0.345m/s² = 1.5525 NThe net force F_net is the sum of the force applied upward F(t) and the weight of the crate Fg, F_net = F(t) - FgWe know that Fg = mg = 4.5 kg * 9.8 m/s² = 44.1 NTherefore, F(t) = F_net + Fg = 1.5525 N + 44.1 N = 45.6525 NThe magnitude of the force F when t = 3.60 s is 45.65 N.
For more questions on Force
https://brainly.com/question/15251816
#SPJ11