in theory, a single earthquake should have only one magnitude. true or false?

A set of beliefs can be said to be pseudoscientific if it lacks one or more of the three features of science and empirical evidence.

Pseudoscience is a set of claims, beliefs, or practices that are presented as scientific but lack empirical evidence, are inconsistent with scientific facts, or are based on incorrect assumptions. Pseudoscience can be seen in a variety of fields, including medicine, psychology, and the paranormal.

Science is defined by three characteristics: empiricism, theory construction, and parsimony or simplicity. Empiricism is the use of evidence to establish scientific facts, while theory construction is the development of a conceptual framework that explains and predicts these facts.

Parsimony is the principle that the simplest explanation is the best one, meaning that theories should not include unnecessary assumptions or complexity. However, pseudoscientific practices often lack one or more of these characteristics. They may fail to use empirical evidence or instead rely on anecdotal evidence or personal experience. Their theories may not be testable or may be inconsistent with established scientific facts. They may also be unnecessarily complex or based on assumptions that have no basis in reality.

Hence, a set of beliefs can be said to be pseudoscientific if it lacks one or more of the three features of science and empirical evidence.

To know about Pseudoscience, refer here:

https://brainly.com/question/12257058#

#SPJ11

Answer:Two nodes and one antinodes .

Explanation:

Answer:

Assume that the tsunami wave moves at a constant velocity.

The pacific ocean is approximately 12,300 miles wide, and a tsunami wave moves at roughly 500 mi/h.

12,300/500=24.6h

The properties of long-lived stars compared to those of short-lived stars are options A and D. A) Long-lived stars begin their lives with more mass and a larger amount of hydrogen fuel. D) Long-lived stars are less luminous during their main-sequence lives.

Long-lived stars start their lives with more mass and a larger amount of hydrogen fuel, and long-lived stars are less luminous during their main-sequence lives. The properties of long-lived stars compare to those of short-lived stars in several ways.

Some of the characteristics of long-lived stars that differentiate them from short-lived stars:

1. Long-lived stars begin their lives with more mass and a larger amount of hydrogen fuel.

2. The gravitational forces that hold the star together cause the core to compress and heat up, causing nuclear reactions to start.

3. Because of the enormous amounts of energy released, these reactions fuel the star and cause it to shine brightly.

4. Long-lived stars are less luminous during their main-sequence lives.

5. The evolution of long-lived stars is gradual because they have a longer lifespan. It may take billions of years for them to consume all of their fuel, and they will then undergo a series of changes, including swelling up into a red giant and finally collapsing to form a white dwarf.

This process can take billions of years. The result is that they are much less luminous during their main-sequence lives than short-lived stars.

Therefore, the correct options are (A) and (D).

To know more about Long-lived stars, refer here:

https://brainly.com/question/1163176#

#SPJ11

We must figure out the total voltage and current required to generate 60 watts of electricity in order to calculate the number of dry cells necessary to light the bulb.

Voltage (V) x Current Equals Power (P) (I)

We are provided 220 volts of voltage and 60 watts of power (P). Hence, the current (I) may be determined as follows:

I equals P / V at 60 W and 220 V, or 0.273 A.

We must sum the EMFs of the cells in series in order to determine the overall voltage needed to power the light using dry cells:

n times EMF = V total

the number of cells is n.

Since the EMF of each cell is 1.5 volts, the total voltage needed may be written as follows:

1.5 n V total

learn more about electricity here:

https://brainly.com/question/8971780

#SPJ4

The electric field inside the wire is still about 2.27 V/m, even though the electron mobility is 4 times higher. This is because the resistance of the wire remains the same, and Ohm's law still applies. The higher conductivity only means that a higher current flows through the wire for the same voltage, but the electric field remains the same.

We can use Ohm's law to find the electric field inside the Nichrome wire:

V = IR

where

V = 1.7 volts (battery voltage)

I = current

R = resistance of the wire

The resistance of a wire can be calculated using the formula:

R = (ρL) / A

where

ρ = resistivity of the material

L = length of the wire

A = cross-sectional area of the wire

The resistivity of Nichrome is about 1.10 x 10^-6 Ωm, and the cross-sectional area of the wire can be calculated using the formula for the area of a circle:

A = πr^2

where

r = radius of the wire = 0.125 mm = 0.000125 m

So, A = π(0.000125 m)^2 = 4.91 x 10^-8 m^2

Substituting the values, we get:

R = (1.10 x 10^-6 Ωm)(0.75 m) / (4.91 x 10^-8 m^2)

R ≈ 0.017 Ω

Now we can find the current:

I = V / R

I = 1.7 volts / 0.017 Ω

I ≈ 100 amps

The electric field inside the wire can be calculated using the formula:

E = V / L

where

E = electric field

V = potential difference

L = length of the wire

Substituting the values, we get:

E = 1.7 volts / 0.75 m

E ≈ 2.27 volts/meter or 2.27 V/m

So the electric field inside the Nichrome wire is about 2.27 V/m.

Next, we can repeat the calculations for the wire with the higher electron mobility. Since the mobile electron density and the length and diameter of the wire are the same, the resistance of the wire will also be the same as before. However, the higher electron mobility means that the wire will have a higher conductivity, which in turn means that the current will be higher for the same voltage.

Let's assume that the electron mobility is 4 times higher than that of Nichrome. Since the resistivity of the material remains the same, the conductivity will be 4 times higher as well. Therefore, the current will be 4 times higher than before:

I = 4 x 100 amps = 400 amps

Using the same formula as before, the electric field inside the wire can be calculated:

E = V / L

E = 1.7 volts / 0.75 m

E ≈ 2.27 volts/meter or 2.27 V/m

So, the electric field inside the wire is still about 2.27 V/m, even though the electron mobility is 4 times higher. This is because the resistance of the wire remains the same, and Ohm's law still applies. The higher conductivity only means that a higher current flows through the wire for the same voltage, but the electric field remains the same.

For such more questions on Ohm's law

https://brainly.com/question/14634041

#SPJ11

The range of frequencies on the electromagnetic spectrum is known as the electromagnetic spectrum.

The spectrum ranges from radio waves, microwaves, infrared waves, visible light, ultraviolet rays, x-rays, and gamma rays. Each type of wave has a specific frequency range, ranging from hertz (Hz) to exahertz (EHz). The lowest frequency waves, such as radio waves, range from 3 kHz to 300 GHz, while the highest frequency waves, such as gamma rays, range from 300 GHz to 3 EHz.
The electromagnetic spectrum is divided into several sections, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, x-rays, and gamma rays. Each type of wave has its own properties and uses in different applications. Radio waves are used for communication, microwaves are used in satellite communication and imaging, infrared radiation is used in medical imaging, visible light is used to see our environment, ultraviolet radiation is used in sun protection and sterilization, x-rays are used in medical imaging and treatment, and gamma rays are used in medical treatment and research.

for such more question on electromagnetic spectrum

https://brainly.com/question/13803241

#SPJ11

We can verify the Newton's second law of motion mathematically by using the momentum impulse relation.

The rate of change of a body's momentum is directly proportional to the applied force and occurs in the direction in which the force operates, according to Newton's Second Law of Motion. where F is the applied force, M is the body's mass, and A is the resulting acceleration.

One way to state Newton's second law of motion is as follows:

Force is inversely correlated with change in momentum and time.

Now, F is directly proportional to mv-mu t or m(v-u) t [where (v-u) represents the acceleration, or change in velocity].

As a result, we discover that F is inversely proportional to m.

By using a constant k, this relationship F is directly proportional to ma can be transformed into an equation.

Thus, F=kma (where k is constant)

The preceding equation is now F=ma or Force= Mass*Acceleration because the value of k in SI units is 1.

To know more about Newton's second law of motion, visit,

https://brainly.com/question/2009830

#SPJ4

Polar stratospheric clouds are high-altitude clouds made of tiny ice crystals that form in the lower stratosphere at very cold temperatures. They exhibit vivid iridescent colors and are associated with ozone depletion.

High-altitude clouds comprised of microscopic ice crystals are referred to as polar stratospheric clouds, nacreous clouds, or mother-of-pearl clouds. At heights of around 15,000 to 25,000 meters and extremely low temperatures of minus 80 to minus 85 degrees Celsius, they occur in the lower stratosphere. The refraction of sunlight as it passes through the ice crystals gives these clouds their distinctive dazzling and vibrant iridescent colors. Polar stratospheric clouds, which are linked to the ozone layer's thinning, are most frequently seen during the winter in polar locations like the Arctic and Antarctic.

learn more about High-altitude clouds here:

https://brainly.com/question/29637430

#SPJ4

The possible maximum carts x is 1, according to given question.

What is average?

In mathematics and statistics, an average is a measure that represents a central value of a set of data. There are different types of averages, but the most common ones are:

Mean: The arithmetic mean, often simply called the "mean", is the sum of a set of numbers divided by the total number of numbers in the set. For example, the mean of the numbers 1, 3, 5, and 7 is (1+3+5+7)/4 = 4.

To solve this problem, we need to first find the total weight of the carts. We can do this by multiplying the weight of each cart by the number of carts:

Total weight of carts = x * 1,200 pounds

Next, we can find the maximum number of carts that can be added to the rollercoaster without exceeding the weight limit. We can do this by subtracting the weight of the riders and the total weight of the carts from the weight limit and dividing the result by the weight of each cart:

Maximum number of carts = (11,000 - 2,690 - x * 1,200) / 1,200

We want to find the maximum value of x that satisfies this inequality, which means we want to find the largest integer value of x that makes the maximum number of carts a whole number. We can express this as follows:

(11,000 - 2,690 - x * 1,200) / 1,200 ≤ n, where n is a positive integer

Simplifying the inequality:

(8,110 - x * 1,200) / 1,200 ≤ n

8,110 / 1,200 - x ≤ 1,200n / 1,200

6.7583 - x ≤ n

n ≥ 7 - x

Therefore, the possible maximum number of carts is the largest integer that satisfies the inequality n ≥ 7 - x. Since n is a positive integer, the largest value of n is 6, and the largest value of x that satisfies the inequality is:

7 - x ≤ 6

-x ≤ -1

x ≥ 1

Therefore, the possible maximum carts x is 1.

To know more about average visit :-

https://brainly.com/question/130657

#SPJ1

The sound intensity level at the position of the microphone is 78.4 dB.

Sound intensity is the amount of sound energy that flows through an area in a certain period of time. Sound intensity is measured in units of watts per meter squared (W/m²).

Sound intensity level, often known as sound level, is the logarithmic measure of the ratio of sound power to reference power. The unit of sound level is the decibel (dB).

Sound intensity level (dB) = 10 log (I / I0)

Where I is the sound intensity in W/m² and I0 is the reference intensity level of 10⁻¹² W/m².

Substituting the given values, I = 35 W and I0 = 10⁻¹² W/m², and 59 m for r, the equation becomes

I = (P / 4πr²)

Sound intensity level (dB) = 10 log (I / I0)

Sound intensity level (dB) = 10 log [(P / 4πr²) / I0]

Sound intensity level (dB) = 10 log [(35 / 4π(59)²) / 10⁻¹²]

Sound intensity level (dB) = 78.4 dB

Therefore, the sound intensity level is 78.4 dB.

Learn more about Sound intensity here: https://brainly.com/question/17062836.

#SPJ11

The most accurate measure of the density of platinum would be obtained through the measurement of its mass and volume, and then calculating its density using the formula: Density = Mass / Volume.

Platinum's density can be determined most precisely by measuring its mass and volume, then applying the formula Density = Mass / Volume to determine both of those quantities. It is crucial to employ the most precise and accurate tools available to guarantee the highest level of accuracy in these measurements. Accurate measurements could be taken using the following methods: Calculate the platinum sample's mass using an analytical balance that has a high degree of accuracy. To prevent any loss or contamination, the balance should be calibrated before use, and the sample should be handled carefully. The volume of the platinum sample should be measured using a method like water displacement or a volumetric flask.

Learn more about measure here:

https://brainly.com/question/4725561

#SPJ4

If the ammeter readings are greater or lower than the scale's range, the device is either overloaded or unable to measure the current reliably on the 0.5A scale.

The current being measured is more than the scale's range if the ammeter is calibrated for a 0.5 A scale and reads 2A. Alternatively put, If the ammeter is calibrated for 0.5 A and displays 0.2 A, Similarly, if the ammeter registers 0.002A, the current being measured is 0.002A or less and falls within the range of the scale. A reading of 0.02A on the ammeter indicates that the current being measured is 0.02A or less and falls within the range of the scale. If the ammeter reads 10A, the ammeter is overloaded and the current being measured is greater than what the scale can handle.

learn more about current here:

https://brainly.com/question/13076734

#SPJ4

A P-N-P transistor is turned on when the base is negative with respect to the emitter.

The operation of a P-N-P transistor is based on the principle of a semiconductor diode. When a small current is applied to the base, it causes a larger current to flow through the emitter and collector. This is because the base-emitter junction is forward-biased, allowing electrons to flow from the emitter to the base. At the same time, the collector-base junction is reverse-biased, allowing holes to flow from the base to the collector.

This flow of electrons and holes produces a current gain. The amount of current gain depends on the type of transistor and the amount of current applied to the base.

Learn more about transistors here:

https://brainly.com/question/1426190

#SPJ1

The work done (needed to move the object at constant speed for the following routes is (a) the purple path o to A followed by a return purple path to O 0 J, (b) the purple path O to C followed by a return blue path to O 21.67 J, (c) the bluc path O to C followed by a retum blue path to O 43.33 J.

(a) The purple path o to A followed by a return purple path to O.

The work done on an object is given by the product of force acting on the object and the displacement of the object in the direction of the force applied. Therefore, the work done on an object is given by the formula

W = Fd,

where W is the work done, F is the force applied, and d is the displacement of the object.

When an object is moved at a constant speed, its acceleration is zero, which means that the net force acting on the object is zero. Therefore, the force applied to the object is equal in magnitude and opposite in direction to the force of friction acting against the motion of the object.

The displacement of the object along the purple path o to A followed by a return purple path to O is zero since the object starts and ends at the same point. Therefore, the work done on the object is zero, which is represented by 0 J.  

(b) The purple path O to C followed by a return blue path to O

The displacement of the object along the purple path O to C is given by the distance between O and C. The distance between two points is given by the formula

d = √((x2 - x1)2 + (y2 - y1)2), where x1 and y1 are the coordinates of the initial point O and x2 and y2 are the coordinates of the final point C.

The coordinates of O are (0, 0), and the coordinates of C are (5, 3). Therefore, the distance between O and C is given by

d = √((5 - 0)2 + (3 - 0)2) = √(25 + 9) = √34 m.

The work done on the object along the purple path O to C followed by a return blue path to O is given by the product of the force and the distance, which is

W = Fd = (4.50 N) × (√34 m) = 21.67 J (rounded to 2 decimal places).

(c) The blue path O to C followed by a return blue path to O.

The displacement of the object along the blue path O to C is given by the distance between O and C. The distance between two points is given by the formula d = √((x2 - x1)2 + (y2 - y1)2), where x1 and y1 are the coordinates of the initial point O and x2 and y2 are the coordinates of the final point C.

The coordinates of O are (0, 0), and the coordinates of C are (5, 3). Therefore, the distance between O and C is given by d = √((5 - 0)2 + (3 - 0)2) = √34 m.

The work done on the object along the blue path O to C followed by a return blue path to O is given by the product of the force and the distance, which is

W = Fd = (4.50 N) × (2√34 m) = 43.33 J (rounded to 2 decimal places).

Learn more about Work done:

https://brainly.com/question/18762601

#SPJ11

Answer: Cepheid variable stars can be used to calculate the distance to faraway galaxies or star clusters by measuring the period of the star's brightness variation. The period of the variation is directly proportional to the star's intrinsic luminosity.

Explanation:

Cepheid variable stars are pulsating stars with a well-defined relationship between their period of pulsation and their absolute magnitude. These stars are particularly essential because the period-luminosity relation is linear, allowing them to act as standard candles.

Cepheid variable stars can be used to estimate the distances to nearby galaxies by comparing their observed brightness with their known luminosity. Cepheids are particularly useful for determining the distances of galaxies that are too distant for parallax measurements to be made or for which there are no other standard candles available.

Cepheids' pulsation periods are extremely consistent, ranging from a few days to a few months. They're used as yardsticks for measuring the distance to objects in our galaxy as well as in other galaxies.

By comparing the apparent brightness of the Cepheids with their actual brightness, astronomers may use the period-luminosity relationship to determine the distance to the Cepheid, as well as the distance to the galaxy in which it resides.

Learn more about cepheid variables here:

https://brainly.com/question/29355714

#SPJ11

Cepheid variable stars can be used to calculate the distance to faraway galaxies or star clusters by measuring the period of the star's brightness variation.

Cepheid variable stars are pulsating stars with a well-defined relationship between their period of pulsation and their absolute magnitude.

Cepheid variable stars can be used to estimate the distances to nearby galaxies by comparing their observed brightness with their known luminosity.

Cepheids are particularly useful for determining the distances of galaxies that are too distant for parallax measurements to be made or for which there are no other standard candles available.

By comparing the apparent brightness of the Cepheids with their actual brightness, astronomers may use the period-luminosity relationship to determine the distance to the Cepheid, as well as the distance to the galaxy in which it resides.

Learn more about cepheid variables here:

brainly.com/question/29355714

#SPJ11

The nonconservative work done by the water on the athlete is 33.5 J.We can use the work-energy theorem to solve this problem.

It states that the net work done on an object is equal to the change in its kinetic energy.

The athlete starts at rest and reaches a speed of 1.00 m/s by doing the work W_1 = 171 J.

The change in the athlete's kinetic energy is ΔK = 33.5 J,

Which is equal to the net work done on the athlete.

Since the work done by conservative forces is zero, the net work done on the athlete is equal to the nonconservative work done by the water.

Therefore, the nonconservative work done by the water on the athlete is W_nc = ΔK = 33.5 J. This can be mathematically expressed as W_nc = W_1 - ΔU, where W_1 is the work done by the athlete, and ΔU is the change in the potential energy of the system.

To know more about work-energy, visit:

https://brainly.com/question/17290830

#SPJ1

If the input force is the same for each type of pulley in the graph, then the pulley with the greatest output force is the one with the highest slope or gradient. This is because the slope or gradient of the line represents the mechanical advantage of the pulley system.

A pulley system is a type of simple machine that is used to make lifting heavy objects easier. It consists of a wheel with a groove in which a rope or chain can run. When force is applied to one end of the rope, the other end moves in the opposite direction, causing the object to move as well.

There are three types of pulleys: fixed, movable, and compound.

The mechanical advantage of a pulley system is calculated by dividing the output force by the input force. A pulley system with a higher mechanical advantage will require less input force to lift a given load than a pulley system with a lower mechanical advantage. This is why pulleys are used in many different types of machines, including cranes, elevators, and escalators.

In conclusion, if the input force is the same for each type of pulley in the graph, then the pulley with the greatest output force is the one with the highest slope or gradient.

Learn more about pulley system: https://brainly.com/question/16355111

#SPJ11

The rubber ball has both the greatest kinetic energy and the least potential energy at position 3.

According to the conservation of energy, the total mechanical energy of a system remains constant. There are two forms of energy - potential energy and kinetic energy.Potential energy (PE) is the energy that an object possesses due to its position or shape. It has the potential to do work when it moves.Kinetic energy (KE) is the energy an object possesses when it moves. It's given by the equation KE = 1/2mv².In the image shown, when the ball is at Position 1, it has potential energy and no kinetic energy. The ball has zero speed at this position.

As the ball falls to the ground, its potential energy is converted to kinetic energy. At position 3, the ball has the most kinetic energy and the least potential energy. At this point, the ball is moving at the maximum velocity.When the ball reaches Position 4, it bounces off the ground and loses some of its kinetic energy due to the collision. It bounces back up and begins to gain potential energy again. At position 2, the ball has the least kinetic energy and the most potential energy. The ball stops momentarily at this position before falling again.Hence, the rubber ball has the greatest kinetic energy and the least potential energy at position 3.

More on energy: https://brainly.com/question/18063927

#SPJ11

The kinetic energy k and the gravitational potential energy ug of a block sliding up an incline are both decreasing during the motion up the incline. Option C is correct .  

Energy is the capability to do work. There are two forms of energy: potential energy and kinetic energy.

Potential energy is stored energy as a result of an object's location or condition, whereas kinetic energy is the energy of motion.

The total energy of an object can be calculated as the sum of its potential and kinetic energies.

Since the block is moving up the incline, it is subjected to gravity. As a result, it must have both kinetic and potential energy.

Kinetic energy is associated with the motion of an object, while potential energy is associated with its position.

At the base of the slope, the block has a specific quantity of kinetic energy due to its motion.

It also has a specific amount of gravitational potential energy at the base of the slope since it is a certain distance above the Earth's surface.

As the block climbs the incline, it slows down due to the effect of gravity. This implies that its kinetic energy is decreasing.

At the same time, it is gaining height, which implies that its gravitational potential energy is decreasing as well. As a result, k and ug are both decreasing.

To know more about kinetic energy;https://brainly.com/question/810158

#SPJ11

The maximum acceleration that the student can achieve with the 1500 kg suitcase is 50N/1500kg = 0.033 m/s2.

Acceleration is the change in velocity per unit time. Acceleration is a vector quantity that has both magnitude and direction. Acceleration is divided into deceleration acceleration and acceleration acceleration. Acceleration decreases meaning the direction of acceleration is opposite to the direction of velocity.

To calculate the maximum acceleration, we can use the following equation:
Force = Mass x Acceleration. Therefore, 50N = 1500kg x Acceleration

Solving for Acceleration, we get 50N/1500kg = 0.033 m/s2.

Learn more about acceleration : brainly.com/question/20595261

#SPJ11

X-rays have more energy than visible light and can pass through the human body.

X-rays are a type of electromagnetic radiation that has a shorter wavelength and higher frequency than visible light. Due to their high energy, X-rays can penetrate solid objects, including the human body. This property makes X-rays useful in medical imaging, such as X-ray radiography, computed tomography (CT) scans, and mammography.

When X-rays pass through the human body, they can be absorbed by the tissues or pass through, depending on the density of the material. Bones, for example, absorb more X-rays than soft tissues like muscle or fat, which is why they appear white in X-ray images.

While X-rays can be helpful in diagnosing medical conditions, they can also be harmful if exposure is not limited or controlled. Prolonged exposure to X-rays can damage DNA and potentially lead to cancer or other health problems.

For more similar questions on "soft tissues"

brainly.com/question/26135103

#SPJ11

The nephron loop is where the countercurrent mechanism predominantly operates. The Henle loop is the name of the nephron component.

Reabsorbing water and sodium chloride from the filtrate is its principal purpose. By creating urine that is extremely concentrated, this helps the body preserve water. Kidney cross slice showing the nephron (kidney tubule) in detail and its associated blood supply.

Renal tubular fluid is defined as fluid present within the lumen of a nephron loop. Glomerular filtrate is the term used to describe the fluid found inside Bowman's capsule. Urine would be regarded as the fluid contained in the collecting duct.

The fact that loop diuretics work on the Loop of Henle gives them their name. They function by blocking NKCC2 transporters in the thick ascending limb, preventing the reabsorption of sodium, potassium, and chloride.

Learn more about Nephron here:

https://brainly.com/question/12307837

#SPJ4

The required time to drop the floor is calculated to be 0.4 s.

The distance travelled horizontally from the table for the marble to strike the floor is 8 cm.

The speed of the rolling marble is given as 20 cm/s.

The height of the table is given 80 cm.

The time taken to drop it to the floor is calculated as,

h = u t + 1/2 g t²

u = 0, so, h = 1/2 g t²

g t² = 2 h

t² = 2 h/g

t = √2h/g = √2(0.8)/9.8 = 0.4 s

The horizontal distance travelled by the marble is calculated as,

x = v₀ t = 20 (0.4) = 8 cm

Thus, horizontal distance is calculated as 8 cm.

To know more about marbles:

https://brainly.com/question/20699773

#SPJ4

The expression for steam function and potential function for the flow over the cylinder in terms of velocity potential and stream function is given as follows: Velocity potential:ψ = -∫Vv·ds; Stream function:ϕ = ∫Vv·ds; Where Vv is the velocity vector, s is the length of the path, and the integrals are taken along some path from a reference point.

What is function? A function is a mapping between sets of inputs and outputs with the property that each input is associated with one output. A function is a mathematical tool for specifying the relationship between two variables that may be expressed as an equation or a graph.

For example, in f(x) = 3x + 2, x is the input, and f(x) is the output. This function maps each input value to a unique output value. When x=1, f(1) = 5, when x=2, f(2) = 8, and so on.

To know more about potential function, refer here:

https://brainly.com/question/11621795#

SPJ11#

The Maxwell equation that explains how a magnetic stripe credit card reader works is Faraday's law.

Faraday's law states that a changing magnetic field will induce an electromotive force (EMF) in a conductor. In a magnetic stripe credit card, the stripe contains small magnetic particles that are arranged in a particular pattern.

As the card is swiped through the reader, the magnetic field in the reader's head changes, causing a corresponding change in the magnetic field of the stripe. This change in magnetic field induces an EMF in the conductor, which is then read by the reader and used to extract information from the card.

For more similar questions on magnetic field:

brainly.com/question/14411049

#SPJ11

One of the methods which will not reduce reactivity of observation is telling the person you are observing his/her behaviour. Correct option is B.

A practical, utilitarian approach, behavioral observation focuses on the plainly discernible ways in which the client engages with his or her surroundings. Behavioural observation can be used as a standalone technique or casually as a component of an interview, a test, or both.

Waiting until the subjects of the observation are used to the observer is one method to reduce reactivity. Another option is to have the observer document the actions without the subjects being aware of the observation.

The act of observation modifies in some manner the situation in which a participant is being observed. Within an experimental setting, reactivity is viewed as a threat to internal validity because the change in behaviour is not due to the experimental manipulation. Best choice is B.

To know more about observations:

https://brainly.com/question/30454101

#SPJ4

The amount of energy radiated each second by the body increases by a factor of 10000 (option D)

To determine the factor in which the amount of energy radiated per second increases, we shall determine the energy per second at 3000 K. Details below:

P₁ / T₁⁴ = P₂ / T₂⁴

P / 300⁴ = P₂ / 3000⁴

Cross multiply

300⁴ × P₂ = P × 3000⁴

Divide both sides by 300⁴

P₂ = (P × 3000⁴) / 300⁴

P₂ = P × 10000

From the above calculation, we can see that the energy per second at 3000 K, is 10000 times the energy per second at 300 K.

Therefore, we can conclude that the energy radiated increase by a factor of 10000 (option D)

Learn more about energy radiation:

https://brainly.com/question/24144494

#SPJ1

Hydroelectric energy is generated by capturing the energy of flowing water. As water flows through a turbine, the blades of the turbine spin and generate electricity.

Wind energy is generated by capturing the kinetic energy of the wind. As wind passes through the turbine, the blades spin and generate electricity.

Geothermal energy is generated by harnessing the natural heat of the Earth’s core. Heat from the Earth’s core is used to generate steam, which is then used to spin a turbine and generate electricity.

Parabolic solar collection is a method of collecting the sun’s energy using large reflective mirrors. The mirrors focus the sunlight onto a central point, which is then used to spin a turbine and generate electricity.

Thus, all of these power sources rely on spinning turbines connected to a generator to produce electricity.

Read more about Electricity here:

https://brainly.com/question/158098

#SPJ11