In which solvent AgCl is most soluble?

The heat of reaction at constant pressure when 150 ml of 0.5 M HCl is mixed with 250 ml of 0.2 M [tex]Ba(OH)_2[/tex] is -2.855 kJ/mol.

To calculate the heat of the reaction, first we have to write the balanced chemical equation for the reaction, followed by calculating the number of moles of the reactants involved. Then, we use the stoichiometric coefficients to find the limiting reactant and calculate the heat of the reaction. The balanced chemical equation for the reaction is:

HCl + [tex]Ba(OH)_2[/tex] → Ba[tex]Cl_2[/tex] + 2[tex]H_2O[/tex]

The reaction is an acid-base neutralization reaction. Therefore, we can use the following formula to calculate the heat of reaction:ΔH = q/m

where q is the heat absorbed or evolved during the reaction and m is the mass of the substance.

The heat of reaction at constant pressure can be calculated as follows:

First, calculate the number of moles of HCl and .Number of moles of HCl = Molarity × Volume of HCl = 0.5 × (150/1000) = 0.075 mol

Number of moles of [tex]Ba(OH)_2[/tex]  = Molarity × Volume of [tex]Ba(OH)_2[/tex]  = 0.2 × (250/1000) = 0.05 mol

Since the balanced chemical equation shows that HCl and [tex]Ba(OH)_2[/tex] react in a 1:1 ratio, the limiting reactant is[tex]Ba(OH)_2[/tex] .

Therefore, 0.05 moles of [tex]Ba(OH)_2[/tex]  will react with 0.05 moles of HCl.

The molar enthalpy of neutralization of HCl is -57.1 kJ/mol.

Therefore, the heat of reaction is given by:

ΔH = n × ΔHmol= 0.05 × (-57.1)= -2.855 kJmol-1

The negative sign indicates that the reaction is exothermic.

Therefore, The heat of reaction at constant pressure when 150 ml of 0.5 M HCl is mixed with 250 ml of 0.2 M[tex]Ba(OH)_2[/tex]  is -2.855 kJ/mol.

To know more about Pressure refer here :

https://brainly.com/question/28012687

#SPJ11

The correct answer for  appropriate hydrogen to remove in this reaction is hb, and it is because it is anti-periplanar to the leaving group Cl.

Explanation: During the reaction, the appropriate hydrogen to remove is hb, and it is because it is anti-periplanar to the leaving group Cl.

When hb is removed, the resulting intermediate has no syn-periplanar hydrogen, and so the reaction stops with a double bond between the two carbons to which the leaving group and the hb were attached.

The term periplanar means that all the groups around a given carbon atom lie in the same plane. For instance, in the given reaction, ha is anti-periplanar to the leaving group Cl.

It means that ha and Cl are on opposite sides of the molecule. On the other hand, hb is anti-periplanar to the leaving group Cl because hb and Clare on the opposite sides of the molecule.

For more information about syn - anti periplaner refer here

https://brainly.com/question/30075420

#SPJ11

The ions are produced by the water self-ionization reaction, which applies to pure water and any aqueous solution: H2O + H2O ⇌ H3O+ + OH.

As per the information provided in the question, the compound that is the limiting reagent is "B". And the starting materials were "more polar" than the reaction product.

The limiting reagent is the one that gets consumed completely in the reaction. The other reactant is left behind in excess. The reaction's speed is determined by the amount of the limiting reagent present. In the given reaction, compound B is the limiting reagent. We can prove this by comparing the number of moles of compounds A and B. We can see that compound B has fewer moles. Therefore, it is the limiting reagent. 2 moles of compound A react with 1 mole of compound B. We have 2 moles of A and 1 mole of B in this reaction mixture. Hence, compound B is the limiting reagent. Starting materials are more polar than the reaction product. When a chemical reaction occurs, the reactants combine to form a new compound or product. The product's properties are often different from those of the starting materials. In this reaction, the starting materials are more polar than the reaction product. This can be seen by observing the reaction mixture's lane. We can see that the reaction product has moved ahead of the starting materials on the chromatogram. The starting materials are more polar than the reaction product.

For more information regarding this topic, you can click the below link

https://brainly.com/question/26905271

#SPJ11

Answer:

Cobalt, Nickel, Chromium, and Copper

Option C (1s² 2s² 2p⁶ 3s¹) represents an atom in an excited state. This is because an atom in an excited state has electrons in higher energy levels than the ground state. In option C, the outermost electron has the 3s orbital, which is a higher energy orbital than the 2p orbitals that are present in options A, B, and E. When an atom is in an excited state, it means that it has more energy than when it is in the ground state. This extra energy can be used to move electrons to higher energy orbitals, like the 3s orbital. Thus, option C is the only option that represents an atom in an excited state.

When electrons are in a higher energy orbital, they are more likely to undergo chemical reactions or to interact with light. In an excited state, the atom is more reactive and can interact with its environment in different ways than when it is in the ground state. This can be used for many applications, from analyzing spectra of different elements to providing information about a molecule's structure.

Know more about  excited state here:

https://brainly.com/question/15413578

#SPJ11

In situ formation of tightly bound bisubstrate adducts can be used to capture unknown substrates. S-adenosyl-vinthionine can be used as a functional probe for AdoMet-dependent methyltransferases. This is the answer to how to capturing unknown substrates via in situ formation of tightly bound bisubstrate adducts: s-adenosyl-vinthionine as a functional probe for AdoMet-dependent methyltransferases.

Methyltransferases play an important role in the regulation of gene expression and protein function. AdoMet-dependent methyltransferases use S-adenosylmethionine (AdoMet) as a substrate to transfer methyl groups to various targets.

In order to identify unknown substrates of AdoMet-dependent methyltransferases, researchers can use S-adenosyl-vinthionine as a functional probe. S-adenosyl-vinthionine is a structural analogue of AdoMet that can form a tightly bound bisubstrate adduct.

Know more about methyltransferases here:

https://brainly.com/question/15304741

#SPJ11

The observation which corresponds to physical change are a liquid freezes into a solid and a solid dissolves into water.

The observation which corresponds to chemical change are a solution heats up upon mixing with another, the color of a substance changes over time, bubbles are produced upon mixing two solutions, and a precipitate is formed from two solutions.

When it comes to determining whether each observation corresponds to a physical change or a chemical change:

1. A liquid freezes into a solid corresponds to a physical change.

The explanation for this is that physical changes occur when the form of the substance alters, but the chemical composition of the substance stays the same. Because the liquid's chemical composition does not alter during the process of freezing, it is classified as a physical alteration.

2. A solution heats up upon mixing with another corresponds to a chemical change.

A chemical change is one in which the composition of the substance changes. This is most commonly accomplished through a chemical reaction, which is when the original molecules are transformed into new molecules. In this instance, when two solutions are combined and heat is generated, a chemical reaction is occurring.

3. A solid dissolves into water corresponds to a physical change.

The explanation for this is that the process of dissolving a solid into water does not alter the chemical composition of the solid. Instead, the solid's particles are separated by the water particles, resulting in a homogenous solution. Because the chemical composition remains constant, it is classified as a physical change.

4. The color of a substance changes over time corresponds to a chemical change.

This alteration is often linked to a chemical reaction. When a substance's color changes over time, it is frequently due to the presence of a different substance. As a result, the chemical composition of the original substance is altered. As a result, it is classified as a chemical alteration.

5. Bubbles are produced upon mixing two solutions corresponds to a chemical change.

This alteration is often linked to a chemical reaction. When two substances combine and produce bubbles, it is usually the result of the generation of a new gas. As a result, the original molecules have transformed, resulting in a new substance. As a result, it is classified as a chemical alteration.

6. A precipitate is formed from two solutions corresponds to a chemical change.

When two solutions are combined, they frequently react to form a precipitate. This indicates that a new substance has been produced, and the original substance's composition has been altered. As a result, it is classified as a chemical alteration.

Learn more about Chemical change:

https://brainly.com/question/11370755

#SPJ11

In the reaction of glucose converting to ethanol we can say energy, in the form of heat, is evolved as the reaction occurs. It is an exothermic reaction.

What is exothermic reaction?

An exothermic reaction is a reaction in which energy is released in the form of light or heat. Thus in an exothermic reaction, energy is transferred into the surroundings rather than taking energy from the surroundings as in an endothermic reaction. In an exothermic reaction, the change in enthalpy ( ΔH) will be negative.

The enthalpy change for the reaction is −67 kJ, which means that 67 kJ of energy is released during the reaction. This indicates that the reaction is exothermic since it releases heat.

Exothermic reactions release energy in the form of heat as the reaction occurs. In this case, the energy released during the fermentation of glucose to alcohol and carbon dioxide is in the form of heat. The heat released can be measured experimentally and is equal to the enthalpy change of the reaction. Therefore, we can say that energy, in the form of heat, is evolved as the reaction occurs.

Learn more about exothermic reaction on:

https://brainly.in/question/19363174

#SPJ11

The division of the efferent nervous system that controls smooth and cardiac muscles and many glands is the autonomic division.

The autonomic portion of the efferent nerve system regulates smooth and cardiac muscles as well as many glands. Involuntary body processes including breathing, digestion, and heart rate that are managed automatically without conscious effort are regulated by the autonomic nervous system (ANS). To keep the body's homeostasis, the sympathetic and parasympathetic divisions of the autonomic nervous system (ANS) cooperate. Although the parasympathetic division encourages "rest and digest" functions like relaxation and digestion, the sympathetic division triggers the "fight or flight" response, preparing the body for intense physical activity. Many medical diseases, including hypertension, arrhythmias, and digestive issues, can be brought on by autonomic nervous system dysfunction.

learn more about efferent nervous system here:

https://brainly.com/question/27994849

#SPJ4

The amount of potassium chloride that will dissolve in 50 grams of water at 50°C depends on the solubility of the salt at that temperature. The solubility of potassium chloride in water at 50°C is approximately 42 grams per 100 grams of water. Therefore, about 21 grams of potassium chloride will dissolve in 50 grams of water at 50°C.

The reaction mechanism that destroys naturally occurring ozone is catalyzed by chlorine free radicals. Chlorine free radicals act as catalysts in this reaction.

A catalyst is a substance that increases the rate of a chemical reaction without being consumed in the reaction itself. The catalyst may be either a solid, a liquid, or a gas. It works by providing a different path for the reaction that requires less energy, thus making it easier for the reaction to occur.

The ozone layer is a naturally occurring layer of ozone gas in the Earth's stratosphere that absorbs harmful ultraviolet radiation from the sun. Chlorine free radicals are produced by the photodissociation of chlorofluorocarbons, which are present in the Earth's atmosphere. These radicals destroy the ozone layer by converting ozone molecules into oxygen molecules.

In summary, the catalyst for the naturally occurring reaction that destroys ozone is chlorine free radicals.

Full task:

Learn more about catalyst: https://brainly.com/question/631853

#SPJ11

The family of elements that is relatively unreactive is the noble gases, also known as Group 18 or the inert gases.

This group includes helium, neon, argon, krypton, xenon, and radon. Noble gases are unreactive because their outermost electron shells are completely filled with electrons, making them stable and resistant to gaining or losing electrons to form chemical bonds with other atoms. This electronic configuration makes noble gases extremely stable and non-reactive under normal conditions. This also means that noble gases have very low electronegativity and ionization energy, making it difficult for them to form chemical bonds with other elements.

To know more about noble gases, here

brainly.com/question/10653147

#SPJ4

In this process, 149 g of Fe should theoretically be produced.

The balanced chemical equation shows that one mole of Fe2O3 reacts with three moles of C to produce two moles of Fe and three moles of CO. Therefore, the mole ratio of Fe2O3 to Fe is 1:1.

Using the given information, we know that 2.00 mol of Fe2O3 is reacted with 4.00 mol of C. We can determine the limiting reactant by comparing the mole ratios of Fe2O3 and C required for the reaction. Since Fe2O3 and C have a mole ratio of 1:3 in the balanced equation, we can see that only 1.33 mol of C (4.00 mol/3) is required to react with 2.00 mol of Fe2O3. Therefore, C is the limiting reactant.

To determine the theoretical yield of Fe, we need to first calculate the amount of Fe that can be produced from 4.00 mol of C. Using the mole ratio of Fe to C in the balanced equation, we can see that 4.00 mol of C can produce:

2 mol Fe / 3 mol C x 4.00 mol C = 2.67 mol Fe

Finally, we can calculate the theoretical yield of Fe by multiplying the amount of Fe that can be produced (2.67 mol) by its molar mass (55.85 g/mol):

Theoretical yield of Fe = 2.67 mol x 55.85 g/mol = 149 g

Therefore, the theoretical yield of Fe in this reaction is 149 g.

To learn more about  balanced equation  refer to:

brainly.com/question/30313275

#SPJ4

The theoretical yield of the solid product FeCO₃ in the reaction here is 18.18 grams. This is because, FeCl₂ is a limiting agent.

The precipitation reaction occurring between iron (II) chloride, FeCl₂ and potassium carbonate K₂CO₃

The Molecular equation is given below: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

The Complete Ionic equation is given below: Fe₂⁺ + 2Cl⁻ + 2K⁺ + CO₃²⁻ → FeCO₃ + 2K⁺ + 2Cl⁻

The Net Ionic equation is given below: Fe²⁺ + CO₃²⁻→ FeCO₃

Molar mass of FeCl₂ = 126.75 g/mol

Molar mass of K₂CO₃ = 138.21 g/mol

n(FeCl₂) = mass/Mr = 20/126.75 = 0.1578 m

n(K₂CO₃) = mass/Mr = 25/138.21 = 0.1808 m

Therefore, FeCl₂ is the limiting agent. The theoretical yield of FeCO₃ can be calculated as follows: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

1 mole of FeCl₂ produces 1 mole of FeCO₃

Moles of FeCO₃ produced = 0.1578 mol

FeCO₃ molar mass = 115.86 g/mol

Mass of FeCO₃ produced = 0.1578 mol × 115.86 g/mol = 18.18 g

Thus, the theoretical yield of the solid product FeCO₃ is 18.18 g.

Learn more about Theoretical yield here:

https://brainly.com/question/14966377

#SPJ11

The given homologous series of hydrocarbons CnH2n have the boiling point generally increasing as the size of the molecules increases. The best explanation for this statement is that in larger organic molecules, the Van Der Waals forces between molecules are greater. The correct answer is Option B.

Hydrocarbons are organic molecules that only contain hydrogen and carbon atoms. The structure of these molecules ranges from simple straight chains to complex branched chains and rings. The number of hydrogen atoms in a molecule increases by two as the number of carbon atoms increases by one. Hydrocarbons are used in a variety of industries, including gasoline, plastic, and synthetic rubber production. They are divided into two categories: aliphatic hydrocarbons and aromatic hydrocarbons.

The boiling point is the temperature at which a liquid turns into a gas or a vapor. It's the temperature at which the vapor pressure of a liquid equals atmospheric pressure. It's a physical property that reflects the strength of intermolecular forces. The boiling point of a substance is affected by the shape of its molecules, the type of intermolecular forces that occur between molecules, and external factors like pressure.

Learn more about Hydrocarbons here: https://brainly.com/question/29318707

#SPJ11

At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell.  Correct answer is option: E.

This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells.  The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.

To know more about resting membrane, here

brainly.com/question/8438145

#SPJ4

The electrostatic potential energy between an electron and a proton that are separated by 53pm is 4.27 × 10^-18 J.

The electrostatic potential energy between two charged particles can be calculated using the

formula U = k*q1*q2/r,

where:

k is the Coulomb constant,

q1 and q2 are the charges of the two particles, and

r is the distance between them.

In this case, we have q1 = -1.60*10^-19 C (charge of the electron), q2 = 1.60*10^-19 C (charge of the proton), and r = 53 pm = 5.3*10^-10 m. Plugging these values into the formula, we get:

U = (8.99*10^9 N m2/C2)*(-1.60*10^-19 C)*(1.60*10^-19 C)/(5.3*10^-10 m)

U = 4.27 × 10^-18 J

Learn more about  electrostatic potential energy here:

https://brainly.com/question/26978411

#SPJ1

It is important to note that  terms "identical conformational isomers" and "enantiomers" are mutually exclusive, as identical conformational isomers have the same orientation of all atoms in space, while enantiomers have mirror-image orientation of all chiral atoms.

Identical conformational isomers: These are molecules that have same atomic connectivity but differ only in way their atoms are oriented in space. Enantiomers: These are mirror images of each other and are non-superimposable. They have the same chemical and physical properties, except for their interaction with plane-polarized light. Diastereomers: These are stereoisomers that are not mirror images of each other and have different physical and chemical properties. Structural isomers: These are molecules that have same molecular formula but differ in their atomic connectivity.

To know more about Enantiomers, here

brainly.com/question/21506956

#SPJ4

Answer:

a. The gluing together of any two atoms that don't have full outer shells.

b. The separation of electrons from the main atom.

c. The joining of atoms by a shared interested of valence electrons which ends up

creating new substances.

d. The melting of substances to form new solids.

Explanation:

a. The gluing together of any two atoms that don't have full outer shells refers to chemical bonding, which can occur through different mechanisms such as covalent bonding, ionic bonding, and metallic bonding.

b. The separation of electrons from the main atom refers to ionization, where an atom or molecule loses or gains one or more electrons and becomes charged.

c. The joining of atoms by a shared interest of valence electrons which ends up creating new substances refers to covalent bonding, where atoms share electrons to form a stable molecule.

d. The melting of substances to form new solids does not necessarily create new substances; it is a physical change where a solid is transformed into a liquid due to an increase in temperature. Upon cooling, the liquid may solidify again, either forming the original substance or a different solid phase.

Answer:

The optimum ratio found through the loudness test represents the ratio of oxygen to hydrogen where the most efficient combustion occurs. When hydrogen and oxygen combine in the correct ratio, a chemical reaction occurs that produces a loud "pop" sound and releases energy in the form of heat and light.

The balanced chemical equation for the reaction between hydrogen and oxygen is:

2H2 + O2 -> 2H2O

This equation shows that two molecules of hydrogen react with one molecule of oxygen to produce two molecules of water. If there is not enough oxygen present, the reaction will be incomplete and unreacted hydrogen will remain. If there is too much oxygen present, the excess oxygen will not react and will simply be wasted.

Therefore, the optimum ratio of oxygen to hydrogen is the ratio where all of the hydrogen is completely reacted with the oxygen, and no excess oxygen is present. This ensures the most efficient combustion and the maximum release of energy in the form of heat and light.

To find the concentration of the nitric acid in the flask, we must first calculate the amount of acid present in the flask. Since we have 30.0 ml of 0.10 m hydrochloric acid and 20.0 ml of nitric acid, we can calculate the total amount of acid present in the flask by multiplying the volume of each acid by its respective concentration.

30.0 ml x 0.10 m = 3.0 mmol HCl

20.0 ml x C nitric acid = 2.0 mmol nitric acid

The total amount of acid present in the flask is 5.0 mmol. To neutralize this amount of acid, we must add 50.0 ml of 0.20 m sodium hydroxide. Therefore, the concentration of the nitric acid must be 0.20 m.

To sum up, the concentration of the nitric acid in the flask is 0.20 m. The concentration of the nitric acid is 0.15M.

What is the concentration of nitric acid?

A mixture of hydrochloric and nitric acid (HCl and HNO3, respectively) of unknown concentration was neutralized with 0.20M sodium hydroxide (NaOH). The amount of NaOH required for neutralization was determined to be 50.0 mL. In a flask, the acid solution contained 30.0 mL of 0.10 M HCl and 20.0 mL of nitric acid. What is the concentration of nitric acid?

Solution: Total volume of the acid solution is given as = 30.0 mL + 20.0 mL = 50.0 mLTotal number of moles of HCl present in the acid solution can be calculated as: Moles of HCl = Molarity of HCl × Volume of HCl present= 0.10 M × 30.0 mL / 1000 mL/L = 0.0030 molTotal number of moles of NaOH required to neutralize the acid mixture is equal to the number of moles of HCl present in the acid solution: Moles of NaOH = Moles of HCl = 0.0030 Moles of NaOH required to neutralize the nitric acid can be calculated as: Moles of NaOH = Molarity of NaOH × Volume of NaOH required= 0.20 M × 50.0 mL / 1000 mL/L = 0.010 Moles of HNO3 = Moles of NaOH = 0.010 molThe concentration of nitric acid can be calculated as Concentration of HNO3 = Moles of HNO3 / Volume of HNO3 present= 0.010 mol / 20.0 mL / 1000 mL/L= 0.50 M = 0.15 M (Approximately)Therefore, the concentration of nitric acid is 0.15 M.

For more details follow the link: https://brainly.com/question/13872928

#SPJ11

The correct answer is that none of the substances listed actually speeds up the absorption of alcohol.

As the rate of alcohol absorption depends on various factors such as the amount of alcohol consumed, the rate of gastric emptying, and the presence of food in the stomach. However, carbonated water and starchy foods may help slow down the absorption of alcohol by delaying the emptying of the stomach, which can result in a slower increase in blood alcohol concentration. Meat products may also help in slowing down the absorption of alcohol due to their high protein content, which can reduce the rate of gastric emptying. Plain water, on the other hand, may actually dilute the alcohol content in the stomach but will not speed up its absorption. It is important to note that while these substances may help to delay the absorption of alcohol, they do not reduce its effects on the body or prevent intoxication. The only effective way to reduce the effects of alcohol is to consume it in moderation or to avoid it altogether. It is also important to never drink and drive, and to seek medical attention if one experiences severe symptoms of alcohol consumption.

To learn more about alcohol click the link below

brainly.com/question/30829120

#SPJ4

a. The rate law for the elementary step [tex]O_{3} + Cl[/tex] --> [tex]O_{2} + ClO[/tex] is k[[tex]O_{3}[/tex]][Cl], indicating that the reaction is bimolecular.

b. The rate law for the elementary step [tex]NO_{2}[/tex] + [tex]NO_{2}[/tex] --> [tex]NO_{3}[/tex] + NO is k[[tex]NO_{2}[/tex]]2, indicating that the reaction is termolecular.

c. The rate law for the elementary step 2NO + [tex]H_{2}[/tex] --> [tex]H_{2}O_{2}[/tex] + [tex]N_{2}[/tex] is k[NO][[tex]H_{2}[/tex]], indicating that the reaction is bimolecular.

The moleculаrity of а reаction refers to the number of reаctаnt pаrticles involved in the reаction. Becаuse there cаn only be discrete numbers of pаrticles, the moleculаrity must tаke аn integer vаlue. Moleculаrity cаn be described аs unimoleculаr, bimoleculаr, or termoleculаr. А unimoleculаr reаction occurs when а molecule reаrrаnges itself to produce one or more products. Аn exаmple of this is rаdioаctive decаy, in which pаrticles аre emitted from аn аtom.

А bimoleculаr reаction involves the collision of two pаrticles. Bimoleculаr reаctions аre common in orgаnic reаctions such аs nucleophilic substitution.  А termoleculаr reаction requires the collision of three pаrticles аt the sаme plаce аnd time. This type of reаction is very uncommon becаuse аll three reаctаnts must simultаneously collide with eаch other, with sufficient energy аnd correct orientаtion, to produce а reаction.

For more information about rate law refers to the link: https://brainly.com/question/8327819

#SPJ11

To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.

When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.

We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:

HCl + NaOH NaCl + H2O

One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.

Let's first determine the quantity of NaOH in moles.

Moles of NaOH = volume (in liters) x molarity

Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M

Moles of NaOH = 0.040 moles

moles of HCl = volume (in liters) x molarity

0.040 moles = volume (in liters) x 0.20 M

Volume (in liters) = 0.040 moles / 0.20 M

Volume (in liters) = 0.20 L

Finally, we can convert the volume from liters to milliliters:

Volume (in milliliters) = 0.20 L x (1000 mL/1 L)

Volume (in milliliters) = 200 mL

To know more about NaOH visit:-

https://brainly.com/question/29854404

#SPJ1

The given statement is true that nonenzymatic E1 reactions can often result in a mixture of more than one alkene product. This is due to the presence of different possible elimination products.

Learn more about E1 reactions: https://brainly.com/question/30887510

#SPJ11

The IUPAC name for the line-angle structure with five carbon atoms in the chain and a Cl atom attached to the third (from left to right) carbon is  3-chloropentane.

The IUPAC naming system for organic compounds involves several steps, but some general principles must be followed.

The longest carbon chain is counted first, and the substituents are identified based on their position in the chain.

In the given structure, the longest chain contains five carbon atoms. The third carbon atom has a chlorine atom attached to it, making it a substituent.

The name of the substituent is added to the chain name as a prefix, thus giving the final name 3-chloropentane.

The IUPAC name of the given compound is 3-chloropentane. The common name for this structure is Chloroamyl.

Learn more about the IUPAC naming system here:

https://brainly.com/question/28872356

#SPJ11

Comparing the calculated value of Ca(OH)2 required with the actual amount of Ca(OH)2 added. Ca(OH)2 added = 0.090 mol/L.∴ Ca(OH)2 added < Ca(OH)2 requires Ca(OH)2 added < Ca(OH)2 required, all of the Ca(OH)2 will be consumed. Therefore, the number of moles of HNO2 will decrease, which makes statement A true. So, statement A is True.

The reaction's balanced equation shows that 2 moles of HNO2 react with 1 mole of Ca(OH)2. This implies that the amount of NO2- in the solution remains the same because the reaction does not include NO2-.Therefore, the number of moles of NO2- will remain the same, which makes statement B false. So, statement B is False.

Using Le Chatelier's principle, we can see that adding Ca(OH)2 to a solution of HNO2 and KNO2 will raise the pH by decreasing the concentration of H+. Hence, the equilibrium concentration of H3O+ will increase. So, statement C is True. Therefore, statement C is True.

The pH of the solution increases as the concentration of OH- increases. Adding Ca(OH)2 to a solution of HNO2 and KNO2 increases the concentration of OH-. Therefore, the pH will increase, making statement D True. Therefore, statement D is True.

The ratio of [HNO2] / [NO2-] will not increase. The number of moles of NO2- remains the same as no NO2- is involved in the reaction with Ca(OH)2. As the number of moles of HNO2 decreases, the ratio [HNO2]/[NO2-] decreases, making statement E false. Therefore, statement E is False.

To know more about Le Chatelier's principle:

https://brainly.com/question/29009512

#SPJ11

The relationship between pH, pOH, and the concentration of hydroxide ions in a solution is given by:

pH + pOH = 14

If a solution has a pOH of 7.39, we can find its pH by subtracting the pOH from 14:

pH = 14 - pOH

pH = 14 - 7.39

pH = 6.61

Therefore, the solution has a pH of 6.61.

The pH scale, which describes the connection between pH, pOH, and the quantity of hydroxide ions, is an essential concept in chemistry. A pH of 7 is regarded as neutral, whereas values below 7 are acidic and those over 7 are basic (also called alkaline).

learn more about , pOH here:

https://brainly.com/question/480457

#SPJ4