Answer: increasing the number of collisions between reactants
Explanation:
A reaction is possible due to collisions between the reactants to create products. If we increase the concentration of reactants then that means that we are increasing the molecules of the reactants which would give them more chances to collide and make products.
For instance, using a non-chemistry example, if there are few cars in a large city, the accidents there will be less because the cars will have such space that they wouldn't collide with each other. If the number of cars in the city is increased however, there is now less space and more chances for cars to collide.
5 grams of iron react with 5 grams of oxygen to produce iron 3 oxide. If I produce 5 grams of product what is my percent yield?
Answer:
5 grams of iron react with 5 grams of oxygen to produce iron 3 oxide.
The actual yield of the reaction is--- 5 grams.
What is the percent yield?
Explanation:
The balanced chemical equation of the reaction is:
[tex]4Fe(s)+3O_{2} (g)->2Fe_{2} O_3(s)[/tex]
1)Identify the limiting reagent.
2)Using the limiting reagent calculate the amount of theoretical yield formed.
Identification of limiting reagent:
4 mol of Fe reacts with 3mol. of O2
that is:
4mol(55.84g/mol) of Fe reacts with ---- 3mol (32.0g/mol)
=223.36g of Fe reacts with ---- 96g. of O2
then,
5g of Fe requires how many grams of O2?
[tex]=>5g. of Fe * \frac{96g O2}{223.36g Fe} \\=2.14g. of O_{2} .\\[/tex]
But provided 5g of O2.
So, O2 is present more than required.
Hence, O2 is the excess reagent and the limiting reagent is Fe.
The amount of product formed depends only on the amount of Fe only.
Theoretical yield:
From the balanced chemical equation:
4mol. of Fe forms ----- 2mol. of Fe2O3.
that is
223.36g of Fe forms --- 2(159.68g)of Fe2O3.
=>223.36g of Fe forms --- 319.36g of Fe2O3.
then,
5g of Fe forms ----? grams of Fe2O3
[tex]=>5g of Fe * \frac{319.36g Fe2O3}{223.36g of Fe} \\=7.14g. of Fe2O3\\[/tex]
[tex]%Error =\frac{actual yield}{theoretical yield} * 100\\\\ %error=\frac{5g}{7.14g} * 100\\ %error =70.0[/tex]% error=actual yield/ theoretical yield x 100
%error=5g./7.14g x100
=>%error=70.0
Hence, the answer is 70.0%.
What is the molarity of a solution prepared by adding enough water to 2 g of acetone to make a total volume of 1.60 l?
Explanation:
answer is in photo above
Alpha particles cannot penetrate the skin. In which of the following circumstances could they still threaten human health?
A. If they travel into the human eye.
B. If they are inhaled or swallowed.
C. If they enter into the human ear.
D. If they are touched.
Answer:
B. If they are inhaled or swallowed.
A gas mixture contains 1.52 atm of Ne, 766 mmHg of He and Ar. What is the partial pressure, in atmospheres, of At if the gas mixture has a total pressure of 3.27atm
Answer:
0.74 atm.
Explanation:
From the question given above, the following data were obtained:
Pressure of Ne (Pₙₑ) = 1.52 atm
Pressure of He (Pₕₑ) = 766 mmHg
Total pressure (Pₜ) = 3.27 atm
Pressure of Ar (Pₐᵣ) =?
Next, we shall convert the pressure of He from mmHg to atm. This can be obtained as follow:
760 mmHg = 1 atm
Therefore,
766 mmHg = 766 mmHg × 1 atm / 760 mmHg
766 mmHg = 1.01 atm
Finally, we shall determine the partial pressure of Ar. This can be obtained as follow:
Pressure of Ne (Pₙₑ) = 1.52 atm
Pressure of He (Pₕₑ) = 1.01 atm
Total pressure (Pₜ) = 3.27 atm
Pressure of Ar (Pₐᵣ) =?
Pₜ = Pₙₑ + Pₕₑ + Pₐᵣ
3.27 = 1.52 + 1.01 + Pₐᵣ
3.27 = 2.53 + Pₐᵣ
Collect like terms
3.27 – 2.53 = Pₐᵣ
Pₐᵣ = 0.74 atm
Thus the partial pressure of Ar is 0.74 atm.
Students conducted an experiment to determine the relative reactivity of lithium,
magnesium, and zinc metal. They placed a small amount of each metal into separate
beakers of water at room temperature. Choose the order that ranks these metals
according to their relative reactivity with H20, from most reactive to least reactive.
O Li, Mg, Zn
O Li, Zn, Mg
O Mg, Li, Zn
O Zn, Mg, Li
Answer:
Lithium, Magnesium, Zinc
Which 3 organisms feed on dead matter and waste products?
Earthworm
Ladybug
Fungi
Mice
Bacteria
Answer:
mice
bacteria
fungi
Explanation:
that's the answer
What is a covalent bond ?
What is a covalent bond ?
Answer is c A bond between two atoms resulting from a transfer of an electron.
Explanation:
A covalent bond is a chemical bond that involves the sharing of electron pairs between atoms. These electron pairs are known as shared pairs or bonding pairs, and the stable balance of attractive and repulsive forces between atoms, when they share electrons, is known as covalent bonding.
A covalent bonds is a bond between two atoms that is made up of share electrons.
Options B is correct.
A flexible container has 5.00 L of nitrogen gas at 298 K. If the temperature is
increased to 333 K, what will be the new volume of that sample of nitrogen?
1) 0.179 L
2) 0.223 L
3) 4.47 L
4) 5.59
Answer: 5.59 L
Explanation: I'm pretty sure it's this. I just took this test and got it right. Hope this helps you out! :))
Answer:
5.59 L
Points earned on this question: 4
Explanation:
took the test
What is the role of gravity in maintaining the atmospheric layer around Earth ? Please put a simple explanation Thank you !
Answer:
Explanation:
First of all, we need to understand what gravity is. Gravity in its simplest form can be best visualized as a force of attraction, that pulls all objects that have a mass towards itself.
It is usually exerted by an object with a larger mass and felt by objects with smaller masses.
Putting this into context, the earth exerts a gravitational pull on all substances with masses, which are around it. This includes the oceans, birds, airplanes, clouds, and even gasses in the atmosphere. The atmospheric gasses may be light enough to float, but they can't go very far, since gravity is constantly tugging at them. This keeps the gasses that make up our atmosphere, within a reasonable radius, which is very close to the earth. In a nutshell, gravity prevents them from floating away into outer space.
Suggest two reactants to prepare sodium nitrate by titration
Answer:
HNO3 and NaOH
Explanation:
A neutralization reaction is a reaction that occurs between an acid and a base to form salt and water only.
Neutralization reactions are commonly carried out by method of titration. That is, a measured volume of acid of unknown concentration is made to react with a known volume of standard base solution or vice versa.
Two reactants that could be titrated to obtain sodium nitrate are nitric acid and sodium hydroxide.
The reaction equation is as follows;
HNO3(aq) + NaOH(aq) ----> NaNO3(aq) + H2O
what are primary miniral nutrient in plant grawth
4 Calculate the mass of tin that can be extracted from 100 kg of tin ore that contains
1% tin by mass. Calculate the mass of waste produced.
Answer:
formula for calculating mass is
first U will HV to find number of moles
m=n×M
As the ZnCl2 dissolved, it separated into zinc ions and chloride ions. Choose the correct reaction.
A. Zinc was oxidized, chlorine was reduced.
B. Zinc was reduced, chlorine was oxidized.
C. This was not a redox reaction.
Answer:
This was not a redox reaction
Explanation:
A redox reaction is one in which a specie is oxidized and another specie is reduced. This means that one specie gains electrons while the other specie looses electrons.
Zinc chloride solid is composed of zinc ions and chloride ions. The ions only become free in solution. There is no change in the oxidation numbers of the ions as they dissolve in water.
Since the oxidation numbers of the species do not change, the process is not a redox reaction
DIRECTION:Tell how charging takes place in each illustration.
Answer:
Due to static charges.
Explanation:
In the illustration, we can see that when we bring the magnet close to the body, the static charges present on the body rearrange theirselves and attracted by the magnet. The magnetic substance is responsible for the arrangement of charges on the body and when they are arranged, they attract each other so we can say that static charges are present on the body and rearrangement occurs in the body.
1.1 Define the concept risky behaviour?
Answer:
Risky behavior or risk-taking behavior is defined according to Trimpop (1994) as “any consciously, or non-consciously controlled behavior with a perceived uncertainty about its outcome, and/or about its possible benefits, or costs for the physical, economic or psycho-social well-being of oneself or others.” In addition to this broad definition, there are other definitions of risky behavior depending on the field of research. While in the economic view, risk is defined in terms of the variability of possible monetary outcomes, in the clinical literature, the risk is generally defined as exposure to possible loss or harm (Schonberg, Fox, & Poldrack, 2011). Turner et al. (2004) described risk-taking behavior further as either a socially unacceptable volitional behavior with a potentially negative outcome in which precautions are not taken, such as speeding, drinking and driving, drugs abuse, unprotected sex and so on.
Describe the nucleus of an atom in short
Answer:
The nucleus is a small, region at the center of the atom which consists of protons and neutrons.
More Detailed Answer:
The nucleus is a small, dense region at the center of the atom. It consists of positive protons and neutral neutrons, so it has an overall positive charge. The nucleus is just a tiny part of the atom, but it contains virtually all of the atom's mass.
- flexbooks
How many individual decay steps are in the decay chain of
uranium-238 before the stable end product of lead-206 is
produced?
Answer:
432
Explanation:
Cheese is an example of Solid in gas colloid Liquid in gas colloid Solid in liquid colloid Liquid in solid colloid
2. Which weather instrument is used to measure wind speed?
gao yin sheng, zhong yin sheng and the other shengs
Which of the following are 'natural polymers
(bio-molecules)? Choose all that apply.
nylon
teflon
silk
cellulose
proteins
polyethylene
Answer:
cellulose
proteins
silk
Explanation:
A polymer is a macromolecule obtained by the combination of small molecules called monomers.
Polymers may be natural or synthetic. Natural polymers occur in nature. They may be part of living thing, and they include protein, cellulose and silk. These natural polymers are biological molecules.
Synthetic polymers are produced by industrial processes. Synthetic polymers include; nylon, Teflon and polyethylene.
a.
Suppose a group of bobcats that normally live and hunt in the tops of mountains, start hunting prey at the base of the
mountain and move into the valley below. Which of the following will most likely happen to the prey in the valley?
Their numbers will soon increase.
b. Their numbers will soon decrease.
C. They will move to the tops of the mountains.
d. They will remain unchanged.
Please select the best answer from the choices provided
Ο Α
OB
C
OD
Mark this and retum
Save and Exit
Next
Submit
Answer:
University of University of South New York Jersey has is a the best in the world the most important most important aspect of aspect of life is life and marriage is in my a lot more of a urban
rare earth elements plz
Answer:
Rare earth elements are lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, yttrium - that appear in low concentrations in the ground.
Explanation:
The rare earth elements (REE) are a set of seventeen metallic elements. These include the fifteen lanthanides on the periodic table plus scandium and yttrium. Rare earth elements are an essential part of many high-tech devices.
1234567890123345678901234567890
Answer:
1234567890123345678901234567890
Explanation:
trick question....
What is the flow rate of oil if 70mL of oil take 20 seconds to flow out of a pipe?
A ball is thrown straight up into the air with a speed of 13 m/s. If the ball has
a mass of 0.25 kg, how high does the ball go? Acceleration due to gravity is g = 9.8 m/s2
A. 9.2 m
B. 8.6 m
C. 10.4 m
D. 9.9 m
Answer:
The total energy, i.e. sum of kinetic and potential energy, is constant.
i.e. E = KE + PE
Initially, PE = 0 and KE = 1/2 mv^2
At maximum height, velocity=0, thus, KE = 0 and PE = mgh
Since, total energy is constant (KE converts to PE when the ball is rising),
therefore, KE = PE
or, 1/2 mv^2 = mgh
or, h = v^2 /2g = 13^2 / (2x9.8) = 8.622 m
Hope this helps.
6. If more reactants are used in a chemical reaction, more products will be produced. This is
because a) More reactants cause the reaction to heat up
b) More reactants take up the same volume
c) More reactants have more atoms to react to form more products
d) Too many products can slow down the reaction
Answer:
D
Explanation:
(20 points and excuse any offensive or seemingly bad language in this question) Budding and regeneration are two types of asexual reproduction.
Answer: true
Asexual reproduction is the process by which an organism is produced from a single parent cell. There are four major forms of asexual reproduction - budding, binary fission, regeneration and parthenogenesis. ... Regeneration is a type of asexual reproduction in which the organism is capable of regrowing certain body parts.
Explanation:
id k what u r talking abt but hope this helps
What is a prism?
A. Something that measures the energy of light wavelengths
B. Something that raises electrons to higher energy levels
c. Something that combines colors into a single source
D. Something that splits up light into different colors
Answer:
D. Something that splits up light into different colors
Explanation:
A prism separates light into various different colors. Thus, D is correct. :)
what is Tyndall effect ?
My answer is in the picture.
Hope that helpsStay safe always
[tex]\huge\boxed{\boxed{\underline{\textsf{\textbf{Answer}}}}}[/tex]
⁺˚*･༓☾✧.* ☽༓･*˚⁺‧
⏩ The scattering of a beam of light through a colloidal solution in its dispersed phase is known as [tex]\large\boxed{tyndall \ \ effect}[/tex].
⁺˚*･༓☾✧.* ☽༓･*˚⁺‧
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐
What is lassaigne's test?
Answer:
The Lassaigne's test, also known as
the sodium fusion test, is used in
elemental analysis to determine the
presenceof foreign elements,
specifically halogens, nitrogen, and
sulfur, in an organic compound.
--------------------------
☆Hope it helps
☆Have a great day!!