If x is a non-zero rational number and y is an irrational number, then y/x is irrational: TRUE
Assume that y/x is rational.
This means that we can write y/x as a fraction in the form a/b, where a and b are integers and b is non-zero.
y/x = a/b
Multiplying both sides by x, we get:
y = ax/b
Since x is a rational number, it can be expressed as a fraction in the form c/d, where c and d are integers and d is non-zero.
x = c/d
Substituting x with c/d in the above equation, we get:
y = ac/bd
Now, we have expressed y as a fraction, which contradicts the given fact that y is an irrational number. Hence, our assumption that y/x is rational must be false.
Therefore, y/x is irrational.
Know more about irrationality here:
https://brainly.com/question/20400557
#SPJ11
Which are correct representations of the inequality –3(2x – 5) < 5(2 – x)? Select two options. x < 5 –6x – 5 < 10 – x –6x + 15 < 10 – 5x A number line from negative 3 to 3 in increments of 1. An open circle is at 5 and a bold line starts at 5 and is pointing to the right. A number line from negative 3 to 3 in increments of 1. An open circle is at negative 5 and a bold line starts at negative 5 and is pointing to the left.
The correct representations of the inequality –3(2x – 5) < 5(2 – x) are:
-6x - 5 < 10 - x-6x + 15 < 10 - 5xHow to explain the inequalityOption 1 can be obtained by distributing the -3 on the left-hand side and the 5 on the right-hand side, which gives:
-6x - 5 < 10 - x
Option 2 can be obtained by simplifying the expression on the left-hand side first and then by subtracting 5x from both sides, which gives:
-6x + 15 < 10 - 5x
The number line representations are not correct for this inequality, as they show the solutions to x > 5 and x < -5 respectively.
Learn more about inequalities on
https://brainly.com/question/24372553
#SPJ1
simplify tan ( t ) / sec ( t ) to a single trig function with no fractions
tan(t)/sec(t) can be simplified to sin(t)/cos(t) * cos(t) which leaves us with just sin(t).
To simplify tan(t)/sec(t), we first need to know that sec(t) is the reciprocal of cos(t), so we can replace sec(t) with 1/cos(t). Next, we can use the identity tan(t) = sin(t)/cos(t) to rewrite the expression as sin(t)/ (1/cos(t)). To simplify the expression further, we can multiply the numerator and denominator by cos(t), which gives us sin(t) * cos(t) / 1. Finally, we can simplify this expression to just sin(t) by canceling out the common factor of cos(t) in the numerator and denominator.
1. Rewrite the given expression in terms of sine and cosine:
tan(t) / sec(t) = (sin(t) / cos(t)) / (1 / cos(t))
2. Simplify the expression by multiplying the numerator and denominator by cos(t):
(sin(t) / cos(t)) * (cos(t) / 1) = sin(t)
The simplified expression of tan(t) / sec(t) is sin(t).
To know more about numerator, visit;
https://brainly.com/question/20712359
#SPJ11
Which functions are not linear? select all that apply.
a. y = x/5
b. y = 5-x2
c. -3x +2y =4
d. y =3x2 + 1
e. y= -5x -2
f. y = x3
The functions that are not linear among the given options are b. y = 5-x^2, d. y = 3x^2 + 1, and f. y = x^3.
A linear function is a function where the variables have an exponent of 1 and do not include terms involving exponents greater than 1. Let's examine each given function:
a. y = x/5: This function is linear because the variable x has an exponent of 1.
b. y = 5-x^2: This function is not linear because the variable x has an exponent of 2, indicating a quadratic term.
c. -3x + 2y = 4: This equation represents a linear equation in standard form, and it can be rewritten as y = (3/2)x + 2/3. Thus, it is a linear function.
d. y = 3x^2 + 1: This function is not linear because the variable x has an exponent of 2, indicating a quadratic term.
e. y = -5x - 2: This function is linear because the variables x and y have exponents of 1.
f. y = x^3: This function is not linear because the variable x has an exponent of 3, indicating a cubic term.
In conclusion, the functions that are not linear among the given options are b. y = 5-x^2, d. y = 3x^2 + 1, and f. y = x^3.
Learn more about functions here:
https://brainly.com/question/31062578
#SPJ11
If 6 chickens lay 18 eggs, find the unit rate in eggs per chicken.
The unit rate in eggs per chicken is 3. To find the unit rate, we divide the total number of eggs by the total number of chickens.
Given that 6 chickens lay 18 eggs, we can use this information to calculate the unit rate. We divide the total number of eggs (18) by the total number of chickens (6).
To find the unit rate in eggs per chicken, divide the total number of eggs by the total number of chickens. So, the unit rate in eggs per chicken is: 18/6 = 3.
To determine the rate of eggs per chicken, you can calculate it by dividing the total number of eggs by the total number of chickens. In this case, the unit rate for eggs per chicken is obtained by dividing 18 eggs by 6 chickens, resulting in a value of 3.
Therefore, the unit rate in eggs per chicken is 3.
Conclusion: The unit rate in eggs per chicken is 3, as calculated by dividing the total number of eggs (18) by the total number of chickens (6). This represents the average number of eggs laid per chicken.
To know more about the unit rate, Visit :
https://brainly.com/question/30604581
#SPJ11
For the state of plane stress shown, determine the maximum shearing stress when (a) σx = 20 ksi and σy = 10 ksi, (b) σx = 12 ksi and σy = 5 ksi. (Hint : Consider both in-plane and out-of-plane shearing stresses.)
The maximum shearing stress for case (a) is approximately 9.10 ksi, and for case (b) it is approximately 6.13 ksi.
For the given state of plane stress, the maximum shearing stress can be determined using the formula:
τmax = (σx - σy) / 2 + sqrt[((σx - σy) / 2)^2 + τxy^2]
where σx and σy are the normal stresses in the x and y directions respectively, and τxy is the shearing stress.
(a) When σx = 20 ksi and σy = 10 ksi, the in-plane shearing stress (τxy) is given as:
τxy = 0.4 * (σx - σy) = 0.4 * (20 - 10) = 4 ksi
The out-of-plane shearing stress is assumed to be zero, since there is no information given about it. Therefore, the maximum shearing stress is:
τmax = (20 - 10) / 2 + sqrt[((20 - 10) / 2)^2 + 4^2] = 5 + sqrt(25 + 16) = 5 + sqrt(41) ≈ 9.10 ksi
(b) When σx = 12 ksi and σy = 5 ksi, the in-plane shearing stress is
τxy = 0.4 * (σx - σy) = 0.4 * (12 - 5) = 2.8 ksi
Again, assuming the out-of-plane shearing stress to be zero, the maximum shearing stress is:
τmax = (12 - 5) / 2 + sqrt[((12 - 5) / 2)^2 + 2.8^2] = 3.5 + sqrt(12.25 + 7.84) = 3.5 + sqrt(20.09) ≈ 6.13 ksi
Therefore, the maximum shearing stress for case (a) is approximately 9.10 ksi, and for case (b) it is approximately 6.13 ksi.
Learn more about maximum shearing stress:
https://brainly.com/question/30328948
#SPJ11
Maximize p=6x+4y subject to x+3y≥6−x+y≤42x+y≤8x≥0,y≥0p=
The ratio of the RHS to the coefficient of linear programming of x in the first row is 6/1 = 6. In the second row, the ratio is 4/-1 = -4, which is not valid. In the third row, the ratio is 8/2 = 4.
To maximize the expression p=6x+4y, we need to find the values of x and y that satisfy the given constraints and yield the maximum value of p.
We can start by graphing the system of inequalities:
x + 3y ≥ 6
-x + y ≤ 4
2x + y ≤ 8
x ≥ 0
y ≥ 0
This will give us a better understanding of the feasible region of solutions. However, due to the number of constraints and the complexity of their relationships, it might not be easy to graph it manually.
Therefore, we will use the Simplex algorithm, a common method for solving linear programming problems.
First, we will convert the inequalities into equations:
x + 3y + s1 = 6
-x + y + s2 = 4
2x + y + s3 = 8
Where s1, s2, and s3 are slack variables that we introduce to transform the inequalities into equations.
We can rewrite the problem as a maximization problem in standard form:
Maximize p = 6x + 4y + 0s1 + 0s2 + 0s3
Subject to:
x + 3y + s1 = 6
-x + y + s2 = 4
2x + y + s3 = 8
x, y, s1, s2, s3 ≥ 0
We can then create a tableau to solve the problem using the Simplex algorithm:
Copy code
x y s1 s2 s3 RHS
1 1 3 1 0 0 6
2 -1 1 0 1 0 4
3 2 1 0 0 1 8
Zj-Cj
0 0 0 0 0 0
The first row represents the coefficients of the first constraint, x + 3y + s1 = 6. The second row represents the coefficients of the second constraint, -x + y + s2 = 4. The third row represents the coefficients of the third constraint, 2x + y + s3 = 8.
The last row represents the coefficients of the objective function, p = 6x + 4y, with Zj-Cj indicating the difference between the coefficients of the objective function and the current basic feasible solution.
To solve the problem using the Simplex algorithm, we need to follow these steps:
Choose the most negative Zj-Cj coefficient.
Select the corresponding column as the entering variable.
Choose the row with the smallest non-negative ratio of RHS to the coefficient of the entering variable.
Select the corresponding row as the leaving variable.
Use row operations to update the tableau.
Repeat until all Zj-Cj coefficients are non-negative.
Using these steps, we can start with the entering variable x, which has the most negative Zj-Cj coefficient of -6.
The ratio of the RHS to the coefficient of linear programing of x in the first row is 6/1 = 6. In the second row, the ratio is 4/-1 = -4, which is not valid. In the third row, the ratio is 8/2 = 4.
For such more questions on linear programing
https://brainly.com/question/14309521
#SPJ11
To maximize the function p=6x+4y subject to the given constraints, we need to graph the feasible region bounded by the inequalities x+3y≥6, −x+y≤4, 2x+y≤8, x≥0, and y≥0. The corner points of this region are (0,2), (2,2), and (4,0).
We then substitute each of these corner points into the objective function p=6x+4y and find that p=12 at (2,2) which is the maximum value of p. Therefore, the maximum value of p is 12 and it occurs at the point (2,2).
To maximize p=6x+4y, subject to the given constraints, follow these steps:
1. Identify the constraints: x+3y≥6, -x+y≤4, 2x+y≤8, x≥0, y≥0.
2. Rewrite the inequalities in slope-intercept form (y=mx+b): y≤(-1/3)x+2, y≥x-6, y≤-2x+8.
3. Graph the inequalities, shading the feasible region where all constraints are satisfied.
4. Identify the vertices of the feasible region: (0,2), (2,2), (3,2).
5. Evaluate p=6x+4y at each vertex: p(0,2)=8, p(2,2)=16, p(3,2)=22.
6. The maximum value of p is 22, which occurs at the point (3,2).
Learn more about p=6x+4y here: brainly.com/question/31962554
#SPJ11
A landscaper earns $30 for each lawn her company mows, but she pays $210 per day in salary to her employees. If her company made more than $150 profit from mowing lawns in a 7-day week, what are the possible numbers of lawns the company could have mowed? Select two options. 12 37 54 61 80.
The possible numbers of lawns the company could have mowed are 12 and 80.
A landscaper earns $30 for each lawn her company mows, but she pays $210 per day in salary to her employees. If her company made more than $150 profit from mowing lawns in a 7-day week, we can use the inequality equation below to solve for the possible numbers of lawns the company could have mowed:7(30x) - 210(7) > 150where x is the number of lawns the company mowed. The left side of the inequality represents the total income the company earned from mowing lawns, while the right side represents the total cost, which is the weekly salary plus the $150 profit we want to exceed. Simplifying the inequality, we get:210x > 5402100 > x. Since the number of lawns has to be a whole number, the possible numbers of lawns the company could have mowed are 12 and 80.
Know more about inequality here:
https://brainly.com/question/30231017
#SPJ11
If the null hypothesis was true, what is the PROBABILITY or PERCENTAGE that one would have the sample evidence that he/she has? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer a a b 1-a с p-value d 1. p-value)
The probability or percentage of obtaining the sample evidence that one has if the null hypothesis was true would depend on the p-value and the level of significance used in the statistical analysis.
If the null hypothesis was true, the probability or percentage of obtaining the sample evidence that one has would depend on various factors such as the sample size, level of significance, and the type of statistical test used.
In general, the probability or percentage can be calculated using the p-value, which represents the probability of obtaining the observed sample results or more extreme results if the null hypothesis is true.
A p-value less than or equal to the level of significance (usually 0.05) indicates that the sample evidence is statistically significant and unlikely to have occurred by chance if the null hypothesis was true.
This means that there is evidence to reject the null hypothesis and accept the alternative hypothesis.
On the other hand, a p-value greater than the level of significance suggests that the sample evidence is not statistically significant and could have occurred by chance if the null hypothesis was true.
In this case, there is not enough evidence to reject the null hypothesis.
Know more about the null hypothesis here:
https://brainly.com/question/4436370
#SPJ11
use a double integral to find the area of the region bounded by the curve r=2cos(θ)
To find the area of the region bounded by the curve r = 2cos(θ), we use a double integral in polar coordinates. The bounds of integration are determined by the range of θ and the corresponding values of r.
The area of the region bounded by the curve r = 2cos(θ) can be found using a double integral. The double integral represents the accumulated area over the region. In polar coordinates, the area element is given by dA = r dr dθ. To find the bounds of integration, we need to determine the range of θ and the corresponding values of r. For the curve r = 2cos(θ), we know that θ ranges from 0 to 2π. To find the range of r, we set the equation equal to zero and solve for r, which gives us r = 2cos(θ) = 0. The curve intersects the origin at θ = π/2 and 3π/2. Therefore, the bounds of integration for r are 0 and 2cos(θ). The double integral becomes ∬ r dr dθ, where r ranges from 0 to 2cos(θ) and θ ranges from 0 to 2π. To calculate the area using the double integral, we integrate with respect to r first and then with respect to θ. The inner integral is ∫[0 to 2π] r dr, which gives us the area of a circle with radius 2cos(θ). This integral simplifies to ∫[0 to 2π] (1/2) r^2 dθ. Integrating this expression with respect to θ from 0 to 2π gives us the final answer for the area of the region bounded by the curve r = 2cos(θ). Evaluating the double integral, we find that the area is equal to π square units. Therefore, the region bounded by the curve r = 2cos(θ) has an area of π square units. In summary, to find the area of the region bounded by the curve r = 2cos(θ), we use a double integral in polar coordinates. The bounds of integration are determined by the range of θ and the corresponding values of r. After setting up the double integral, we integrate first with respect to r and then with respect to θ. Evaluating the integral, we find that the area of the region is equal to π square units.
learn more about polar coordinates here: brainly.com/question/8190956
#SPJ11
would like some help on this question please, anyone??
Answer:
I never had this question but trying to help according to formula
let b=12
let h=3
According to given formula,
a=bh÷2
a=(12×3)÷2
a=36÷2
a=28in2
A standard deck of playing cards contains 52 cards.One card is selected from the deck. (a) Compute the probability of randomly selecting a club or spade? (b) Compute the probability of randomly selecting a club, spade or heart? (c) Compute the probability of randomly selecting a three or spade?
(C) the probability of randomly selecting a three or spade is approximately 0.327.
(a) To compute the probability of randomly selecting a club or spade, we need to determine the number of favorable outcomes (club or spade) and the total number of possible outcomes (52 cards in the deck).There are 13 clubs and 13 spades in a standard deck, totaling 26 favorable outcomes.
The probability of randomly selecting a club or spade is:
P(club or spade) = favorable outcomes / total outcomes
= 26 / 52
= 1/2
Therefore, the probability of randomly selecting a club or spade is 1/2.
(b) To compute the probability of randomly selecting a club, spade, or heart, we need to determine the number of favorable outcomes (club, spade, or heart) and the total number of possible outcomes (52 cards in the deck).
There are 13 clubs, 13 spades, and 13 hearts in a standard deck, totaling 39 favorable outcomes.
The probability of randomly selecting a club, spade, or heart is:
P(club, spade, or heart) = favorable outcomes / total outcomes
= 39 / 52
= 3/4
Therefore, the probability of randomly selecting a club, spade, or heart is 3/4.
(c) To compute the probability of randomly selecting a three or spade, we need to determine the number of favorable outcomes (three or spade) and the total number of possible outcomes (52 cards in the deck).
There are four threes (one three in each suit) and 13 spades in a standard deck, totaling 17 favorable outcomes.
The probability of randomly selecting a three or spade is:
P(three or spade) = favorable outcomes / total outcomes
= 17 / 52
Simplifying the fraction, we have:
P(three or spade) ≈ 0.327
to know more about probability visit:
brainly.com/question/31828911
#SPJ11
Mount Rainier, in the state of Washington, is
one of the snowiest places on Earth. During
one winter snowstorm, a meteorologist
predicted 15 feet of snow at Mount Rainier.
Another meteorologist predicted 156 inches
of snow. Which snow prediction is greater?
By how much?
Answer:
156 and is greater by 141
Step-by-step explanation:
156>15
156-15=141
Step-by-step explanation:
To compare the two predictions, we need to convert the units of measurement to the same unit. We can do this by converting 15 feet to inches.
1 foot = 12 inches
Therefore, 15 feet = 15 x 12 = 180 inches.
So, the first meteorologist predicted 180 inches of snow.
Now, we can compare the two predictions:
- First meteorologist: 180 inches
- Second meteorologist: 156 inches
The first meteorologist's prediction is greater by:
180 - 156 = 24 inches
Therefore, the first meteorologist's prediction of 15 feet of snow at Mount Rainier is greater than the second meteorologist's prediction of 156 inches of snow by 24 inches.
determine the order in which a preorder traversal visits the vertices of the given ordered rooted tree.
Preorder traversal visits the vertices of an ordered rooted tree in the order: A, B, D, E, C, F, G.
Preorder traversal is a method used to visit all the vertices of a tree in a specific order. In a preorder traversal, we start at the root of the tree and visit the root node first, then recursively visit its left subtree, and finally recursively visit its right subtree.
To determine the order in which a preorder traversal visits the vertices of a given ordered rooted tree, we follow these steps:
1. Start at the root of the tree.
2. Visit the root node.
3. Recursively visit the left subtree.
4. Recursively visit the right subtree.
5. Let's apply this method to the given ordered rooted tree to determine the order of the preorder traversal:
A
/ \
B C
/ \ \
D E F
\
G
6. Start at the root node A.
7. Visit node A.
8. Move to the left subtree rooted at B.
9. Visit node B.
10. Move to the left subtree rooted at D.
11. Visit node D.
12. No left or right subtree for node D, so backtrack to node B.
13. Move to the right subtree of node B.
14. Visit node E.
15. No left or right subtree for node E, so backtrack to node B.
16. Backtrack to node A.
17. Move to the right subtree rooted at C.
18. Visit node C.
19. Move to the right subtree rooted at F.
20. Visit node F.
21. Move to the right subtree rooted at G.
22. Visit node G.
23. No left or right subtree for node G, so backtrack to node F.
24. Backtrack to node C.
25. Backtrack to node A.
The order in which the preorder traversal visits the vertices of the given ordered rooted tree is: A, B, D, E, C, F, G.
Therefore, the main answer is: Preorder traversal visits the vertices of the given ordered rooted tree in the order: A, B, D, E, C, F, G.
To learn more about preorder traversal, click here: brainly.com/question/31270557
#SPJ11
given sin0=-3/5 and csc0=-5/3 and the angle is in quadrant lll, find the value of other trigonometric functions. draw a picture. pay attention to the signs
All the values of other trigonometric functions are,
cos θ = -4/5.
sec θ = -5/4.
tan θ = 3/4.
cot θ = 4/3.
Since, We have to given that;
sin θ = -3/5 and csc θ = -5/3
We know that;
⇒ sin² θ + cos² θ = 1
Substitute the given values, we get;
⇒ (-3/5)² + cos² θ = 1
⇒ cos² θ = 1 - 9/25
⇒ cos² θ = 16/25
⇒ cos θ = -4/5
(negative because it is in Quadrant 3).
And, sec θ = 1 / cos θ
sec θ = -5/4.
And, tan θ = sin θ / cos θ
tan θ = -3/5 / - 4/5
= -3/5 × -5/4
= 3/4.
And, cot θ = 1 / tan θ
cot θ = 4/3.
Hence, All the values of other trigonometric functions are,
cos θ = -4/5.
sec θ = -5/4.
tan θ = 3/4.
cot θ = 4/3.
Learn more about the function visit:
https://brainly.com/question/11624077
#SPJ1
Roughly 20% (1 in 5) of Americans have a functional disability that inhibits their mobility. A historical district estimated that roughly 50% of it is buildings met accessibility requirements. An independent review team showed that of 100 randomly selected buildings, 46 met standards.
Create a 95% confidence interval. Do we have evidence that the districts estimation was correct?
Group of answer choices
Yes, because 20% falls on the interval
No, because 46% is not close to 20%
Yes, because 50% falls on the interval
No, because 46% is not close to 50%
The 95% confidence interval can be created by using the formula that is given below;$$\mathrm{CI}=\bar{x} \pm z_{\alpha/2}\frac{s}{\sqrt{n}}$$Here, 95% confidence interval is to be calculated.The sample proportion of buildings meeting accessibility requirements, p is equal to 0.46.The sample size, n is 100.We have, $100(1-p)=100(1-0.46)=54$.Thus, the standard error is:$$\begin{aligned}s &=\sqrt{\frac{p(1-p)}{n}} \\ &=\sqrt{\frac{0.46 \times 0.54}{100}} \\ &=0.050\end{aligned}$$The z-score that corresponds to a 95% confidence level, i.e., $\alpha = 0.05$ is:$$\begin{aligned} z_{\alpha/2} &= z_{0.025} \\ &=1.96 \end{aligned}$$Therefore, the 95% confidence interval is given as:$$\begin{aligned} \mathrm{CI} &=\bar{x} \pm z_{\alpha/2} \frac{s}{\sqrt{n}} \\ &=0.46 \pm 1.96 \frac{0.050}{\sqrt{100}} \\ &=0.46 \pm 0.01 \end{aligned}$$Hence, the 95% confidence interval is (0.45, 0.47).Now, as the district estimated that 50% of its buildings met accessibility requirements, and the confidence interval does not contain 0.50, which implies that there is evidence that the district's estimation was incorrect.Answer: No, because 46% is not close to 50%.
A zip-code is any 5-digit number, where each digit is an integer 0 through 9. For example, 92122 and 00877 are both zip-codes. How many zip-codes have at least one occurrence of the digit 0 and at least one digit greater than or equal to 5 ? e.g. 90210, 42069,83560, 09745 (You may use a calculator. Give the exact number. No justification necessary.)
The number of zip codes that have at least one occurrence of the digit 0 and at least one digit greater than or equal to 5 is X.
The number of zip codes that satisfy the given conditions, we can analyze each digit's possibilities.
For a zip code to have at least one occurrence of the digit 0, there are no restrictions. Each of the five digits can independently take any value from 0 to 9, resulting in 10 possibilities for each digit.
For a zip code to have at least one digit greater than or equal to 5, we need to consider the complementary case where all digits are less than 5 and subtract it from the total number of possibilities.
In this complementary case, each digit can only take values from 0 to 4, resulting in five possibilities for each digit.
Therefore, the total number of zip codes that have at least one occurrence of the digit 0 and at least one digit greater than or equal to 5 is:
Total number of possibilities - Number of zip codes with all digits less than 5
= 10^5 - 5^5
= 100,000 - 3,125
= 96,875
Therefore, there are 96,875 zip codes that satisfy the given conditions.
To know more about Zip codes , refer here :
https://brainly.com/question/14491280#
#SPJ11
a) Select a parameter of your choice: proportion, mean, or standard deviation, for which a general claim can be (or has been) made. Please try to decide on something that you are interested in knowing about. Who (what) are the two populations you want to compare?
b) Describe the problem including a general claim made about two specific populations:
c) Identify any relevant variables to the above problem: Are these variables categorical or numerical?
d) Collect either categorical or numerical data from two relevant samples. You must collect at least 30 data values from each sample. Discuss how your data has been collected and whether you were able to collect a random sample of data. If a random sampling was not possible, please explain why
Therefore, The problem is to compare the mean time spent on social media between high school and college students. The general claim is that college students spend more time on social media than high school students. The relevant variable is the amount of time spent on social media, which is numerical. Data was collected from 30 high school students and 30 college students, but a random sample was not possible due to bias in the data collection method.
I have chosen to compare the mean amount of time spent on social media per day between high school and college students. The general claim is that college students spend more time on social media than high school students. The relevant variable is the amount of time spent on social media, which is numerical. I collected data from 30 high school students and 30 college students using a survey. Unfortunately, it was not possible to collect a random sample of data because the survey was distributed through social media platforms, which may have biased the results towards students who spend more time on social media.
The problem is to compare the mean time spent on social media between high school and college students. The general claim is that college students spend more time on social media than high school students. The relevant variable is the amount of time spent on social media, which is numerical. Data was collected from 30 high school students and 30 college students, but a random sample was not possible due to bias in the data collection method.
To know more about probability visit :
https://brainly.com/question/13604758
#SPJ11
Suppose that the time until the next telemarketer calls my home is distributed as
an exponential random variable. If the chance of my getting such a call during the next hour is .5, what is the chance that I’ll get such a call during the next two hours?
The probability that I'll get a telemarketing call during the next two hours is 0.5e^(-2) ≈ 0.0677, or about 6.77%.
Let X be the time until the next telemarketer call. Then X has an exponential distribution with parameter λ. Let A be the event that I get a telemarketing call in the next hour, and B be the event that I get a telemarketing call in the next two hours. We want to find P(B | A).
We know that P(A) = 0.5, so λ = -ln(0.5) = ln(2). Then the probability density function of X is f(x) = λe^(-λx) = 2e^(-2x) for x > 0.
Using the definition of conditional probability, we have:
P(B | A) = P(A ∩ B) / P(A)
We can compute P(A ∩ B) as follows:
P(A ∩ B) = P(B | A) * P(A)
P(B | A) is the probability that I get a telemarketing call in the second hour, given that I already got a call in the first hour. This is the same as the probability that X > 1, given that X > 0. Using the memoryless property of the exponential distribution, we have:
P(X > 1 | X > 0) = P(X > 1)
So P(B | A) = P(X > 1) = ∫1∞ 2e^(-2x) dx = e^(-2).
Therefore, we have:
P(B | A) = P(A ∩ B) / P(A)
e^(-2) = P(A ∩ B) / 0.5
Solving for P(A ∩ B), we get:
P(A ∩ B) = e^(-2) * 0.5 = 0.5e^(-2)
So the probability that I'll get a telemarketing call during the next two hours is 0.5e^(-2) ≈ 0.0677, or about 6.77%.
To know more about probability refer here
https://brainly.com/question/30034780#
#SPJ11
Most trigonometric equations have unique solutions.true or false
True, Most trigonometric equations have unique solutions.
Most trigonometric equations have unique solutions . Trigonometric equations often have multiple solutions due to the periodic nature of trigonometric functions such as sine, cosine, and tangent. When solving trigonometric equations, you need to consider all possible solutions within the given interval, typically by applying general solutions or analyzing the periodicity of the function involved.
However, there are some cases where there may be multiple solutions or no solution at all. It is important to consider the domain and range of the trigonometric functions when solving these equations in detail. Most trigonometric equations have unique solutions . Trigonometric equations often have multiple solutions due to the periodic nature of trigonometric functions such as sine, cosine, and tangent.
Learn more about trigonometric equation
brainly.com/question/30710281
#SPJ11
A normal population has mean = μ 10 and standard deviation = σ 7.
(a) What proportion of the population is less than 21 ?
(b) What is the probability that a randomly chosen value will be greater than 3?
Round the answers to four decimal places.
The probability that a randomly chosen value is greater than 3 is 0.8413.
(a) Let X be a random variable with a normal distribution with mean μ = 10 and standard deviation σ = 7. We want to find the proportion of the population that is less than 21, or P(X < 21).
Using the standard normal distribution, we can find the z-score corresponding to 21:
z = (21 - μ) / σ = (21 - 10) / 7 = 1.57
Looking up the corresponding probability in the standard normal distribution table, we find that P(Z < 1.57) = 0.9418.
Therefore, P(X < 21) = P(Z < 1.57) = 0.9418.
(b) We want to find the probability that a randomly chosen value is greater than 3, or P(X > 3).
Again, we can use the standard normal distribution and find the z-score corresponding to 3:
z = (3 - μ) / σ = (3 - 10) / 7 = -1
Using the standard normal distribution table, we find that P(Z > -1) = P(Z < 1) = 0.8413.
Therefore, P(X > 3) = 1 - P(X < 3) = 1 - P(Z < -1) = 1 - 0.1587 = 0.8413.
So the probability that a randomly chosen value is greater than 3 is 0.8413.
To know more about probability refer here:
https://brainly.com/question/11234923
#SPJ11
find the least-squares solution x of the system [\begin{array}{ccc}2&-1\\-2&1\\5&3\end{array}\right] x= [ 12 -4 9].
. (b) determine the orthogonal projection p=Ax . . calculate the residual r(x)=b-Ax
a.The least-squares solution x is x = [52/39, -5/6, 1]
b. The orthogonal projection p is [13/39, -5/3, 8]. The residual r(x) is [32/3, 9, 1].
a. To find the least-squares solution x of the system, we need to solve the normal equations:
(A^T)Ax = (A^T)b
where A is the coefficient matrix and b is the constant vector.
Given the system:
[2 -1] [x1] [12]
[-2 1] [x2] = [-4]
[5 3] [x3] [9]
Taking the transpose of A:
A^T = [2 -2 5]
[-1 1 3]
Calculating A^T * A:
(A^T)A = [2 -2 5] [2 -1] = [39 -15]
[-1 1] [-2 1] [-15 6]
[5 3] [6 10]
Calculating (A^T) * b:
(A^T)b = [2 -2 5] [12] = [3]
[-1 1] [-4] [-5]
[5 3] [9] [39]
Now we have the equation:
[39 -15] [x1] [3]
[-15 6] [x2] = [-5]
[x3] [39]
To solve this system of equations, we can use various methods such as matrix inversion or Gaussian elimination. Let's use Gaussian elimination:
First, divide the first row by 39:
[1 -15/39] [x1] [3/39]
[0 1] [x2] = [-5/6]
[x3] [39/39]
Next, add 15/39 times the second row to the first row:
[1 0] [x1] [3/39 + 15/39*(-5/6)] = [52/39]
[0 1] [x2] = [-5/6]
[x3] [39/39]
So the least-squares solution x is:
x = [52/39, -5/6, 1]
b. To determine the orthogonal projection p = Ax, we multiply the original matrix A by the least-squares solution x:
A = [2 -1]
[-2 1]
[5 3]
p = A * x
= [2 -1] [52/39] = [26/39 - 13/39] = [13/39]
[-2 1] [-5/6] [-5/3]
[5 3] [1] [8]
Therefore, the orthogonal projection p is [13/39, -5/3, 8].
To calculate the residual r(x) = b - Ax, we subtract the orthogonal projection p from the original vector b:
r(x) = b - p
= [12 -4 9] - [13/39, -5/3, 8]
= [468/39 - 52/39, 12/3 + 15/3, 351/39 - 312/39]
= [416/39, 27/3, 39/39]
= [32/3, 9, 1]
Therefore, the residual r(x) is [32/3, 9, 1].
Visit here to learn more about Matrix:
brainly.com/question/28777961
#SPJ11
WHICH DESCRIPTION BEST COMPARES THE GRAPHD OF TWO FUNCTIONS BELOW?
Q5. The time of oscillation of a plumb bob differs as the square root of its length. If a plumb bob of length 50 cm oscillates once in a second, find the length of the plumb bob oscillating once in 4.2 seconds. A.424 B.653
The length of the plumb bob that Oscillates once in 4.2 seconds is approximately 424.67 cm.
We can use the relationship between the time of oscillation and the square root of the length of the plumb bob. Let's denote the time of oscillation as T and the length of the plumb bob as L.
According to the given information, when the length of the plumb bob is 50 cm, the time of oscillation is 1 second. Let's denote this as T₁ = 1 second and L₁ = 50 cm.
We can express the relationship as follows:
T ∝ √L
To find the length of the plumb bob that oscillates once in 4.2 seconds, we need to find the value of L when T = 4.2 seconds. Let's denote this length as L₂.
Using the relationship mentioned above, we can write:
T₁ / T₂ = √(L₁ / L₂)
Substituting the known values, we have:
1 second / 4.2 seconds = √(50 cm / L₂)
Simplifying the equation, we get:
1 / 4.2 = √(50 / L₂)
Squaring both sides of the equation, we have:
1 / (4.2)² = 50 / L₂
Solving for L₂, we get:
L₂ = 50 * (4.2)²
Calculating this expression, we find:
L₂ ≈ 424.67 cm
Therefore, the length of the plumb bob that oscillates once in 4.2 seconds is approximately 424.67 cm.
To know more about Oscillates .
https://brainly.com/question/6953860
#SPJ11
determine whether the planes are parallel, perpendicular, or neither. 9x 36y − 27z = 1, −12x 24y 28z = 0. a) Parallel. b) Perpendicular. c) neither.
The dot product comes zero, so the planes are perpendicular.
To determine whether the planes are parallel, perpendicular, or neither, we need to examine their normal vectors. The normal vector of the first plane can be found by taking the coefficients of x, y, and z, which gives <9, 36, -27>. The normal vector of the second plane can be found similarly, which gives <-12, 24, 28>.
To determine if the planes are parallel, we need to check if their normal vectors are parallel. We can do this by taking the dot product of the two normal vectors. If the dot product is equal to the product of their magnitudes, then they are parallel. If the dot product is zero, then they are perpendicular. If the dot product is neither equal to the product of their magnitudes nor zero, then they are neither parallel nor perpendicular.
Dot product of the two normal vectors: (9)(-12) + (36)(24) + (-27)(28) = -108 + 864 - 756 = 0
Since the dot product is zero, the planes are perpendicular. Therefore, the answer is b) Perpendicular.
Learn more about dot product here, https://brainly.com/question/31389049
#SPJ11
Lily is going to invest in an account paying an interest rate of 5. 6% compounded
continuously. How much would Lily need to invest, to the nearest cent, for the value
of the account to reach $78,000 in 9 years?
Lily would need to invest $43,502.56 for the value of the account to reach $78,000 in 9 years.
The formula is given by:A = P * e^(rt)
Here, A represents the final amount, P represents the initial amount, e is a mathematical constant approximately equal to 2.71828, r represents the interest rate and t represents the time period for which the interest has been applied.
According to the problem, we have
A = $78000, r = 5.6% = 0.056, and t = 9 years
Putting these values into the formula, we get:
$78000 = P * e^(0.056*9)
To get P, we will divide both sides by e^(0.056*9):
P = $78000/e^(0.056*9)P = $43502.56
Therefore, Lily would need to invest $43,502.56 for the value of the account to reach $78,000 in 9 years.
To know more about interest, click here
https://brainly.com/question/30393144
#SPJ11
Use Green's Theorem to evaluate the line integral along the path C is the triangle with vertices (0,0), (2,0), and (2, 1) and the path is a positively oriented curve. ∫C xy dx + y^5 dy
The line integral along the path C is:
∫C xy dx + y^5 dy = ∬R (∂Q/∂x - ∂P/∂y) dA = ∬R (1 - x) dA = 5/3
We can use Green's Theorem to evaluate the line integral by converting it into a double integral over the region enclosed by the curve. Green's Theorem states that for a vector field F(x,y) = P(x,y)i + Q(x,y)j and a positively oriented, piecewise smooth curve C that encloses a region R, we have:
∫C P(x,y) dx + Q(x,y) dy = ∬R (∂Q/∂x - ∂P/∂y) dA
In this case, we have:
P(x,y) = xy
Q(x,y) = y^5
∂Q/∂x = 0
∂P/∂y = x
So, we need to compute the double integral of x over the region R enclosed by the triangle C. This can be split into two integrals over two triangles:
∬R x dA = ∫0^1 ∫0^(2-2y) x dx dy + ∫1^2 ∫0^(2-y) x dx dy
Evaluating the integrals, we get:
∬R x dA = ∫0^1 y(2-2y)^2/2 dy + ∫1^2 y(2-y)^2/2 dy
= 5/3
To learn more about Integral :
https://brainly.com/question/22008756
#SPJ11
Kevin mixed 8 ounces of yellow paint for every 3 ounces of white paint, how many ounces of white paint wpuld be mixed with 24 ounces of yellow paint?
Kevin mixed 8 ounces of yellow paint for every 3 ounces of white paint, and we want to find out how many ounces of white paint would be mixed with 24 ounces of yellow paint.
We will use proportions to solve the problem. A proportion is an equation that relates two ratios. The ratios we will use in this problem are the ratio of yellow paint to white paint that Kevin uses and the ratio of yellow paint to white paint that we want to find. The ratio of yellow to white paint that Kevin uses is 8:3. The ratio of yellow to white paint that we want to find is unknown, so we will call it x:y. We can set up a proportion as follows:8:3 = 24:xTo solve for x, we will cross-multiply and simplify:8x = 72x = 9Therefore, 9 ounces of white paint should be mixed with 24 ounces of yellow paint.
To know more about Kevin mixed visit:
brainly.com/question/14413581
#SPJ11
Composition of relations on the real numbers. About Here are four relations defined on R, the set of real numbers R-( (x, y):Xsy R2 (x, y): x>y) R3-(( y} x, y). x Describe each relation below. (Hint:each of the answers will be one of the relations R1 through R4 or the relation RxR.) fa) R1 O R2 R40 R R1 OR R3 O R Feedback?
The question provides four relations, R1, R2, R3, and RxR, defined on the set of real numbers. To understand the composition of these relations, we need to know that the composition of two relations is a new relation that is formed by connecting the outputs of the first relation with the inputs of the second relation. In this case, we need to determine the composition of R1 and R2, R4, R1 or R3, and RxR. By applying the definition of each relation, we can determine the composition of these relations. In conclusion, understanding the composition of relations is an essential aspect of algebra, and it helps in solving problems related to functions and sets.
The composition of two relations is a new relation that is formed by connecting the outputs of the first relation with the inputs of the second relation. In this question, we have four relations, R1, R2, R3, and RxR, defined on the set of real numbers. R1 is defined as (x, y): xy, R3 is defined as (x, y): yy), resulting in the empty set since there are no real numbers that satisfy both conditions. Similarly, we can find the composition of R4, R1 or R3, and RxR.
In conclusion, understanding the composition of relations is an essential aspect of algebra. It helps in solving problems related to functions and sets. In this question, we need to apply the definition of each relation to find their composition, resulting in a new relation. This process helps in understanding how different relations can be combined to form a new relation.
To know more about algebra visit:
https://brainly.com/question/24875240
#SPJ11
A Taylor polynomial (and later, a Taylor series) centered at x = 0 is often called a Maclaurain polynomial (or series). Find the Maclaurin polynomials of orders n = 0, 1, 2, 3, and 4, and then find the nth Maclaurin polynomials for the function in sigma notation. Enter the Maclaurin polynomials below for 1/1+x po(x) = P1(x) =p2(x) = p3(x) =p4(x) = Ρη(x) = Σ n=0
The nth Maclaurin polynomial for the function can be expressed in sigma notation as:
Ρη(x) = Σn=0 [(−1)^n x^n]/n!
We have the function f(x) = 1/(1+x).
The Maclaurin polynomials of orders n = 0, 1, 2, 3, and 4 are:
n = 0: p0(x) = f(0) = 1
n = 1: p1(x) = f(0) + f'(0)x = 1 - x
n = 2: p2(x) = f(0) + f'(0)x + (1/2!)f''(0)x^2 = 1 - x + x^2
n = 3: p3(x) = f(0) + f'(0)x + (1/2!)f''(0)x^2 + (1/3!)f'''(0)x^3 = 1 - x + x^2 - x^3
n = 4: p4(x) = f(0) + f'(0)x + (1/2!)f''(0)x^2 + (1/3!)f'''(0)x^3 + (1/4!)f''''(0)x^4 = 1 - x + x^2 - x^3 + x^4/4
The nth Maclaurin polynomial for the function can be expressed in sigma notation as:
Ρη(x) = Σn=0 [(−1)^n x^n]/n!
where n! denotes the factorial of n.
To know more about Maclaurin polynomial refer here:
https://brainly.com/question/29500966
#SPJ11
Concrete cement is being installed around a rectangular swimming pool that measures 10m by 5m. The cement will have a uniform width 4m all around the pool.
(a) Calculate the area surrounding the swimming pool.
(b) Cement costs $50 per m2 for material and labour. Determine the cost to install the cement.
(a) To calculate the area surrounding the swimming pool, we need to consider the width of the cement around all sides of the pool. Since the cement has a uniform width of 4m on all sides, we need to add 4m to the length and width of the pool.
The length of the pool with the surrounding cement is 10m + 2(4m) = 10m + 8m = 18m.
The width of the pool with the surrounding cement is 5m + 2(4m) = 5m + 8m = 13m.
The area surrounding the swimming pool is the difference between the area of the larger rectangle (with the cement) and the area of the pool itself.
Area surrounding pool = Area of larger rectangle - Area of pool
= (18m) x (13m) - (10m) x (5m)
= 234m² - 50m²
= 184m².
(b) The cost to install the cement is determined by multiplying the area surrounding the pool by the cost per square meter, which is $50.
Cost to install cement = Area surrounding pool × Cost per square meter
= 184m² × $50/m²
= $9,200.
More on area of rectangles can be found here: https://brainly.com/question/8663941
#SPJ1