Answer:
It’s false
Explanation:
I can’t explain it’s too confusing
When query data is exported to a document it is most effectively displayed in a
file.
paragraph.
text field.
table.
Answer:
The answer is "file".
Explanation:
The query data would be a collected data and data action, in which users are using a query in needed to respond to a reasonable question, adjust, combine data from a table or indeed to join, change, or erasing table data, consequently, this is most derive conclusions in a file so if query data are exported to the document, that's why the other choices were wrong.
If we use 6 bits for representing positive and negative numbers using 2's
complement methods, what is the value of 11100?
Suppose end system A wants to send a large file to end system B. At a very high level, describe how end system A creates packets from the file. When one of these packets arrives to a packet switch, what information in the packet does the switch use to determine the link onto which the packet is forwarded
Answer:
The answer is below
Explanation:
Suppose end system A wants to send a large file to end system B, the large file is first divided into smaller chunks. Each chunk is then assigned a header forming a packet. Multiple packets are being generated with each of the packet containing a unique destination address in its header.
When a packet arrives at the packet switch, the switch uses the unique destination address that is attached in the header of the packet to determine the link onto which the packet is to be forwarded.
Help fast
When comparing and what is the main difference?
O The first symbol is for reviewing text and the second for enlarging text.
The first symbol is for spacing and the second for sizing.
O The first symbol is for viewing text and the second for inserting text.
O The first symbol is for inserting text and the second for viewing text.
Answer:
The first symbol is for inserting text and the second for viewing text
Explanation:
If you wanted to use the numeric key pad to multiply 8 and 5 and then divide by 2, you would type
1. 8/5*2
2. 5/2/8
3. 8*5*2
4. 8*5/2
Answer:
Option 4 would be your best answer
Explanation:
The * means multiply
And the / means Divide
Hope this helps :D
Where are the kidneys located?
a) Attached to the bladder
b) Lower back
c) Upper back
d) Middle back
e) Chest cavity
f the following is acian of health
Answer:
B
Explanation:
Your kidneys are fist-sized organs shaped like beans that are located at the back of the middle of your trunk, in the area called your flank. They are under the lower part of your ribcage on the right and left sides of your backbone.
Implement the ArrayMethod application containing an array that stores eight integers. The application should call the following five methods: 1. display - should display all the integers 2. displayReverse - should display all the integers in reverse order 3. displaySum - should display the sum of the integers 4. displayLessThan - should display all values less than a limiting argument 5. displayHigherThanAverage - should display all values that are higher than the calculated average value.
Answer:
public static void display(int [] arr){
System.out.print("Arrays: ");
for(int i =0;i<arr.length;i++){
System.out.print(arr[i]+" ");
}
System.out.println();
}
public static void displayReverse (int [] arr){
System.out.print("Arrays in reverse order: ");
for(int i=arr.length-1;i>=0;i--){
System.out.print(arr[i]+" ");
}
System.out.println();
}
public static int displaySum (int [] arr){
System.out.print("Sum: ");
int sum = 0;
for(int i =0;i<arr.length;i++){
sum+=arr[i];
}
return sum;
}
public static void displayLessThan (int [] arr, int num){
System.out.print("Less than "+num+": ");
for(int i =0;i<arr.length;i++){
if(arr[i]<num){
System.out.print(arr[i]+" ");
}
}
System.out.println();
}
public static void displayHigherThanAverage (int [] arr){
System.out.print("Higher than average: ");
int sum = 0;
for(int i =0;i<arr.length;i++){
sum+=arr[i];
}
float average = sum/arr.length;
for(int i =0;i<arr.length;i++){
if(arr[i]>average){
System.out.print(arr[i]+" ");
}
}
System.out.println();
}
Explanation:
The methods were written in Java. See attachment for explanation where I used comments to explain each lines.
Note that lines that begin with double slash (//) are comments
Match the data type to the given data.
1. float
2. array
3. Boolean
4. character
false
с
c, o, m, p, u, t, er
26.2
When developing a naming convention, what is the most important quality to keep in mind?
Answer:
Files should be named consistently.
File names should be short but descriptive.
Avoid special characters or spaces in a file name .
Use Capitals and Underscore instead of periods or spaces or slashes.
Is a defense of a political position an argument
Answer:
yes
Explanation:
yyyyyyyyyyeeeeeeeeesssssss
Photographs that are too dark or too light can be difficult to fix with photo-editing software.
True
False
What is the final gear reduction of a compound gear reduction of 36 to 12 for the first stage and 60 to 12 for the second stage?
A. 0.067
B. 0.533
C. 8
D. 15
Answer:
8
Explanation:
Gear reduction = driven gear teeth / driving gear teeth
First stage reduction :
Driven gear teeth = 36
Driving gear teeth = 12
36 /12 = 3
Second stage reduction :
Driven gear teeth = 60
Driving gear teeth = 12
60 /12 = 5
First stage + second stage
3 + 5 = 8
compared to EMT, IMC is?
When compared to EMT, IMC (intermediate metal conduit) is a thinner and also have a lighter-weight .
What is the comparison in IMC vs. EMTNote that EMT is one that cannot be threaded and is not set up for strong connections like IMC and RMC.
In regards to residential wiring, IMC is known to be the one that is said to be often and usually limited to service entrance assemblies as well as exposed and it often runs to and fro.
Therefore, When compared to EMT, IMC (intermediate metal conduit) is a thinner and also have a lighter-weight .
Learn more about metal conduit from
https://brainly.com/question/5023977
#SPJ1
Mrs. Toma is preparing a marksheet of Final term using Excel. She needs to 1
add a new subject title in the worksheet. Now, which component does she
need to add in her marksheet?
Answer:
a
Explanation:
multiple keys may represent a primary key true or false
Select the correct answer.
Which of these is an adventure game?
A.
Duck Hunt
B.
Tetris
C.
Myst
D.
Sudoku
few toffees were distributed among oriya , piyush and payal . priya got 3/8 , piyush and payal 1/8 and 1/2 of total toffees respectively. who got the maximum toffees
Answer:
it is payal because 1/2 is a half
Explanation:
there you go
“Jon is a DJ and he spends a lot of time traveling around the country to perform at concerts and festivals. He has a large music collection which he must be able to easily transport with him wherever he goes.” [6 marks]
Please answer
Answer:
there is no exact question to answer here i could help you if you explained it more in the comment section of this answer! sorry!
Explanation:
“Jon is a DJ, and he spends a lot of time traveling around the country to perform at concerts and festivals. The best storage device for him is the hard disk.
What is a hard disk?A hard disk, also known as an HDD, is a non-removable, rigid magnetic disk with a large data storage capacity. While a Compact Disc is a small plastic disc on which music or other digital information is stored in the form of a pattern of metal-coated pits that can be read using laser light reflected off the disc.
A hard disk is a large plastic disc on which music or other digital information is stored. By moving all parts of a file to contiguous blocks and sectors, a good defragmentation utility can reduce access time.
Therefore, "Jon is a DJ who spends a lot of time traveling across the country performing at concerts and festivals." A hard disk is the best storage device for him.
To learn more about the hard disk, refer to the below link:
https://brainly.com/question/14867477
#SPJ2
The question is incomplete. Your most probably complete question is given below:
What is the best storage device for him?
Choose all items that represent essential tasks to do after an interview is over.
Send copies of the resume and cover letter.
Construct a career portfolio.
Ask about next steps and the best way to communicate.
Phone each person interviewed.
Send a follow-up email within 24 hours.
Submit the job application.
Answer:
Ask about next steps and the best way to communicate.
Send a follow-up email within 24 hours.
Explanation:
An interview is a well-organized conversation where one participant asks questions, and the other person gives answers to those questions.
Essential tasks that need to be done after an interview is over are as follows:
1. Ask about next steps and the best way to communicate.
2. Send a follow-up email within 24 hours.
Answer:
Ask about next steps and the best way to communicate.
Send a follow-up email within 24 hours.
which of the following is not a benefit of aws cloud computing
Write a program that reads in ten numbers from the user and displays the distinct numbers. If a number entered by the user appears multiple times, your program needs to filter the repeated numbers and therefore displaying the repeated numbers only once. For example, if the user enters the number 1, 4, 6, 1, 8, 4, 2, 1, 3,9 then the output of your program should be: 1, 4, 6, 8, 2, 3, 9.
Answer:
Here you go :)
Explanation:
Change this however you'd like:
array = []
for n in range(10):
x = int(input("Enter integer: "))
array.append(x)
dup = set(array)
print(", ".join(str(i) for i in dup))
are used for mechanical power transmission over long distances
A. Spur Gears
B. Helical Gears
C. Planetary Gears
D. Chain and Sprockets
Answer:
D. Chain and Sprockets
Explanation:
Chains and sprockets are power transmission tools. The roller chain is connected to a toothed wheel which is the sprocket. The combination provides mechanical power to the wheels of vehicles.
An advantage they possess is their ability to transmit mechanical power over both short and long distances. They have a high degree of efficiency but they require constant lubrication. They also produce noise during operation.
Choose all items that represent common website
design flaws.
menu at the top of the page
distracting background
short page-load times
too many or confusing fonts
poor navigation
dead hyperlinks
Answer:
2,4,5,6
Explanation:
just answered it
What are the challenges of giving peer feedback in peer assessment
Answer:
There can some challenges when giving and receiving peer feedback in a peer assessment. Some people can be harsh in their assessments of your work. Some students cannot take that and because of that it can cause them to question a lot of their work. People can also be wrong when it comes to the assessment
Help plz brainliest.
Answer:
Follows are the solution to this question:
Explanation:
In this question, the equation will be written as the coefficients for each of the bases, that is from the above quantum states b is given as follows:
[tex]\to | b \rangle = 0.4 | 00 \rangle + 0.65 | 01 \rangle + 0.2 | 10 \rangle + 0.61 | 11 \rangle[/tex]
Therefore the equation can be written as in the state b:
[tex]\to \mathbf{state_b = [0.4, 0.65, 0.21, 0.61]}[/tex]
What episode and Season of Simpsons is this
Answer:
season 9 episode 23.65 and the bases it 12
Write a C console application that will be used to determine if rectangular packages can fit inside one of a set of spheres. Your program will prompt the user for the three dimensions that define a rectangular box; the length, the width, and the height. The interior diameter of a sphere is used to identify its size. Spheres are available in the following five sizes: 4- inch, 6-inch, 8-inch, 10-inch, and 12-inch. Your program will execute repeatedly until the user enters a value of zero for one or more of the rectangular box dimensions. After obtaining the dimensions of the rectangular box, your program will call a function named getSphereSize that determines if the box will fit inside one of the five spheres. The formula for calculating the diagonal of a rectangular box is:
Answer:
#include <cmath>
#include <iostream>
using namespace std;
int getSphereSize(double length, double breadth, double height) {
double diagonal = sqrt(length * length + breadth * breadth + height * height);
if (diagonal <= 4)
return 4;
if (diagonal <= 6)
return 6;
if (diagonal <= 8)
return 8;
if (diagonal <= 10)
return 10;
if (diagonal <= 12)
return 12;
return 0;
}
int main() {
double length, breadth, height;
int sphereCounts[5] = {0};
int sphereSize;
while (true) {
// Get dimensions of the box
cout << "Enter the dimensions of the box:\n";
cout << "Length: ";
cin >> length;
cout << "Breadth: ";
cin >> breadth;
cout << "Height: ";
cin >> height;
if (length <= 0 || breadth <= 0 || height <= 0)
break;
sphereSize = getSphereSize(length, breadth, height);
if (sphereSize == 0)
cout << "The box cannot fit in any of the spheres";
else
cout << "The box can fit in the " << sphereSize << "-inch sphere";
// Increment the counter
if (sphereSize == 4)
sphereCounts[0]++;
else if (sphereSize == 6)
sphereCounts[1]++;
else if (sphereSize == 8)
sphereCounts[2]++;
else if (sphereSize == 10)
sphereCounts[3]++;
else if (sphereSize == 12)
sphereCounts[4]++;
cout << "\n\n";
}
cout << "\nNumber of 4-inch spheres: " << sphereCounts[0];
cout << "\nNumber of 6-inch spheres: " << sphereCounts[1];
cout << "\nNumber of 8-inch spheres: " << sphereCounts[2];
cout << "\nNumber of 10-inch spheres: " << sphereCounts[3];
cout << "\nNumber of 12-inch spheres: " << sphereCounts[4];
cout << endl;
return 0;
}
Explanation:
The "cmath" library is included in the c++ program. The getSphereSize function is used to return the sphere size the rectangle dimension can fit into. It program continuously prompts the user for the length, breadth, and height of the rectangle and passes the values to the getSphereSize function in the while but breaks if any or all of the variable value is zero.
The sizes of the sphere objects in inches are collected in an array of five integer values of zeros and are incremented by one for every match with a rectangle.
Name a type of malware designed to provide unauthorized , remote access to a user's computer
The steps.txt file contains the number of steps a person has taken each day for a year. There are 365 lines in the file, and each line contains the number of steps taken during a day. (The first line is the number of steps taken on January 1st, the second line is the number of steps taken on January 2nd, and so forth.) Write a program that reads the file, then displays the average number of steps taken for each month. (The data is from a year that was not a leap year, so February has 28 days.)
Answer:
In Python:
file = open('steps.txt', 'r')
readLine = file.readlines()
begin = 0
mdays = (31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31)
print("Month"+"\t\t"+"Average Steps")
for m in range(len(mdays)):
end = begin + mdays[m]
steps = readLine[begin:end]
sumsteps = 0
for s in steps:
sumsteps = sumsteps + int(s)
average = round(sumsteps/mdays[m],1)
print(str(m+1)+"\t\t"+str(average))
begin = begin + mdays[m]
Explanation:
This line opens the step.txt file
file = open('steps.txt', 'r')
This reads the content of the file
readLine = file.readlines()
begin = 0
This initializes the months of the days to a tuple
Mmdays = (31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31)
This prints the header
print("Month"+"\t\t"+"Average Steps")
This iterates through the tuple
for m in range(len(Mmdays)):
This calculates the days in each month
end = begin + Mmdays[m]
This gets the number of steps in each month
steps = readLine[begin:end]
This initializes the number of steps to 0
sumsteps = 0
This iteration sums up the number of steps in each month
for s in steps:
sumsteps = sumsteps + int(s)
This calculates the average of steps rounded to 1 decimal place
average = round(sumsteps/Mmdays[m],1)
This prints the calculated average
print(str(m+1)+"\t\t"+str(average))
This calculates the beginning of the new month
begin = begin + Mmdays[m]
The Office Assistant is available in Access just like it is in other Office applications,True
False
Answer:
True.
Explanation:
Microsoft Access can be defined as a software application or program designed by Microsoft corporation to avail end users the ability to create, manage and control their database.
A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to create, store, modify, retrieve and manage data or informations in a database. Generally, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.
An Office assistant refers to an intelligent user interface designed and developed by Microsoft Inc as a user interface for all of the Microsoft Office applications. It is designed to provide assistance or help end users by making the retrieval of information from Office help interactive through the use of animated characters.
Hence, the Office Assistant is available in Access just like it is in other Office applications.