It can be difficult, especially for someone with partial hearing loss, to understand someone speaking rapidly in a low, soft voice.
Which of the following auditory characteristics are associated with sound waves for low, quiet voices?
correct:
-low frequency
-low amplitude
incorrect
- vestibular

Charles Lyell was an important eighteenth-century geologist who developed the concept of the uniformitarianism to explain the slow, steady changes which is responsible for shaping the earth. Option D is correct.

Charles Lyell was an important geologist in the late 18th and early 19th centuries. He developed the concept of uniformitarianism, which is the idea that the slow, steady processes we observe today are the same ones that have been operating throughout the history of the earth. This concept was in contrast to the prevailing view at the time, which held that catastrophic events such as floods or earthquakes were responsible for shaping the earth's surface.

Lyell's work was influential in shaping the field of geology and laid the groundwork for the modern understanding of earth processes. His ideas also had a significant impact on the development of evolutionary theory, as they suggested that the earth was much older than previously thought, allowing for enough time for biological evolution to occur.

To know more about Charles Lyell here

https://brainly.com/question/16484823

#SPJ4

The code for loop that adds the integers between lo and hi (inclusive), and stores the result in result is written bellow

for (i = lo, result = 0; i <= hi; result += i, i++) {}

As long as the condition is still true, this loop will continue to run.

Your question is incomplete but most probably your full question was

Assume the int variables i, lo, hi, and result have been declared and that lo and hi have been initialized. Write a for loop that adds the integers between lo and hi (inclusive), and stores the result in result. Your code should not change the values of lo and hi. Also, do not declare any additional variables -- use only i, lo, hi, and result.NOTE: just write the for loop header; do not write the loop body itself.

Learn more about loop at https://brainly.com/question/13909676

#SPJ4

The electric field will have a magnitude of 2.07 x [tex]10^{3}[/tex] N/C and the electric field will be directed downwards.

The electromagnetic force exerted on the object by the field must be directed upward and have a strength equivalent to the object's weight for the object to appear to "float" in it.

Thus, [tex]F_{e} = qE = mg[/tex]

The magnitude of the electric field is,

E = mg/ IqI = (3.80 x [tex]10^{-3} Kg[/tex])(9.80 m/s²)/1.80 x [tex]10^{-6}[/tex] C = 2.07 x [tex]10^{3}[/tex] N/C.

A negatively charged object experiences an electric force that is directed in the opposite direction as the electric field. Because it must be directed downward, the electric force.

To learn more about electric field visit:

brainly.com/question/15800304

#SPJ1

Answer: F = ma = 1000 * 6.25 = 6,250 N.

Explanation:

The centripetal acceleration (a) of an object moving in a circular path is given by:

a = v^2 / r

where v is the tangential velocity and r is the radius of the loop.

The force factor, or centripetal force (F), required to keep an object moving in a circular path is given by:

F = ma

where m is the mass of the object.

At the bottom of the loop, where the tangential velocity is 10 m/s, the centripetal acceleration is:

a = v^2 / r = 10^2 / 9 = 100 / 9 m/s^2

The force factor required to maintain this acceleration depends on the mass of the object. For example, if the mass of the roller coaster car is 1000 kg, then the force factor required would be:

F = ma = 1000 * (100 / 9) = 11,111 N

At the top of the loop, where the tangential velocity is 7.5 m/s, the centripetal acceleration is:

a = v^2 / r = 7.5^2 / 9 = 6.25 m/s^2

Using the same mass of 1000 kg, the force factor required would be:

F = ma = 1000 * 6.25 = 6,250 N.

Because the positive and negative regions of the two dipoles are close to one another, there is a larger attraction between the dipoles in orientation (a), which results in a lower electrostatic potential energy than in orientation (b).

When the positive and negative regions of two dipoles are close together in orientation (a) and vice versa, the electrostatic potential energy between the dipoles is smaller than in orientation (b), where the positive and negative regions are farther away.

It's critical to first comprehend the operation of electric fields and charges in order to comprehend why this is the case. A pair of opposite charges that are equally spaced apart form a dipole. The electric field created by a dipole diminishes with distance; it is highest close to the charges and weakest at great distances. The electric field from one dipole affects the charges in the second dipole when two dipoles are brought close to one another.

Learn more about dipoles here:

https://brainly.com/question/14173758

#SPJ4

The statements which are correct here are, options 2 and 3 . The force from the seat is downward and it is depends on the speed of the movement.

Force is an external agent to change the motion of an object. It is a vector quantity having both magnitude and direction. The normal fore acting on a body is the force exerted by a surface in contact  on the body.

Here, the roller coaster is moving upside down. Hence, the force from the seat to the person is downward. The apparent  weight of the person does not changing here on motion.

The correct statement are then options 2 and 3. he normal force from the seat on the person points downward. The magnitude of the normal force from the seat on the person depends on how fast the person is moving.

Find more on normal force:

https://brainly.com/question/30078280

#SPJ1

Communication cannot be reversed. This statement is clearly true. Because, we cannot take the words back and undo all the initial effects during communication.

An action that can be reversed back to its initial state is called reversible otherwise it is called irreversibility. Communication is irreversible and can be defined as a principle of interpersonal interaction in which we cannot take or retrieve information we say or pass to another party, whether it is what we intended to say or not.

We can wish we hadn't said something, regret it, and apologies later, but we can't take it back because once it's out, it's out.

We're only talking to make up for the unintended consequences of previous communication errors. We believe that taking more care with what we say in the first place can break this seemingly never-ending cycle.

Once a word, phrase, or comment is spoken, or an impulsive text message or e-mail is sent, it cannot be erased from the memory of others. Because communication is irreversible, one should always be mindful of what they communicate to others.

Find more on reversibility:

https://brainly.com/question/15284219

#SPJ9

Your question is incomplete. But your complete question is as follows:

Communication cannot be reversed. True/false ?

The required speed with which the pebble strikes the ground when the pebble is fired from the slingshot with specified initial velocity is calculated to be 29.53 m/s.

The initial speed of the pebble with which it is fired is 15 m/s.

The height of the building is given as 33 m.

Acceleration due to gravity g = 9.8 m/s²

Now, let us calculate the velocity of the pebble with which it strikes the ground.

The suitable equation of motion is, v² - u² = 2 a s

where,

v is final velocity

u is initial velocity

a is acceleration

s is distance

Entering the values into the above equation by making v as subject, we have,

v² - u² = 2 a s

v² = u² + 2 a s

v = √(u² + 2 a s) = √[15² + 2(9.8)(33)] = √(225 + 646.8) = √871.8 = 29.53 m/s

Thus, the final velocity is calculated to be 29.53 m/s.

To know more about speed:

https://brainly.com/question/14441575

#SPJ4

The solution of the question according to what is given is as follows:

Pressure p=  ∫9h

Hence,

a) 20 psi=  ∫w 9h

20 x 144= 1.94 (32.2) (h+0.5)

hw= 45.60 ft

Now,

20 psi=  ∫Hg (g)

20 x 144= 26.3 (32.2) (h+0.5)

h= 2.9ft

A unit of pressure or stress based on avoirdupois measurements is the pound per square inch, or more precisely, the pound-force per square inch. It is the pressure created when one pound of force is applied to an area that is one square inch. 1 psi is roughly equivalent to 6895 Pa in SI units.

Learn more about unit of pressure here brainly.com/question/17467912

#SPJ4

(a) The elevator is be moving upwards and accelerating upwards.

(b) The acceleration of the student is 0.5 m/s².

The net force acting on the elevator is determined by applying Newton's second law of motion as shown below.

F (net) = Ws + We ( when the elevator is moving upwards )

F (net) = Ws - We ( when the elevator is moving downwards)

where;

Since the resultant force of the elevator is greater than the weight of the student, the elevator must be moving upwards.

The mass of the student = 600 N / 9.8 m/s² = 61.22 kg

The acceleration of the student = ( 630  N - 600 N ) / ( 61.22 kg )

= 0.5 m/s²

Learn more about reading of elevator here: https://brainly.com/question/2516315

#SPJ1

Answer:

Explanation:

cohesion

We cannot use quantifiers directly to define xP(x) using just negations, disjunctions, and conjunctions. However, we may express the same idea by negating a universal quantifier.

The negation of ∀xP(x), expressed as ¬∀xP(x), indicates the existence of an x for which P(x) is false. This may be stated as follows:

Translate one quantifier to the other using

        1) ¬∃x(stuff) <=> ∀x¬ (stuff)

a) ¬∃x∀yP(x, y) <=>

b) ∀x¬∀yP(x, y)

And again use

¬∀x(stuff) <=> ∃x¬ (stuff)

c) ∀x∃y¬P(x, y)

       2. ¬∀y∀x(P(x, y)∨Q(x, y))

∃y¬∀x(P(x, y)∨Q(x, y))

∃y∃x¬(P(x, y)∨Q(x, y))

Use DeMorgans Law

¬(stuff∨mush) <=> (¬stuff)∧ ( ¬mush)

∃y∃x(¬P(x, y)∧¬Q(x, y))

       3. ¬(∃x∀y¬P(x, y)∧∀x∀yQ(x, y))

Now you do it: use DeMorgan

¬(stuff∧mush) <=> (¬stuff)∨( ¬mush)

Learn more about Negations:

https://brainly.com/question/30551729

#SPJ4

Complete question:

Rewrite each of these statements so that negations appear only applied to predicates (that is, so that no negation is outside a quantifier or an expression involving logical connectives).

Yes, this is how spontaneity is defined. A spontaneous reaction is one that can move forward without requiring any energy from outside the system.

A spontaneous process is one that happens inadvertently under specific circumstances. On the other hand, a nonspontaneous process won't happen unless it is continuously "driven" by the input of energy from an outside source.

One that favours the production of products under the reaction's current conditions is called a spontaneous reaction.. A wildfire that is raging is an example of an exothermic reaction, in which the system's energy decreases as energy is released to the As energy is discharged into the environment as heat, the system's energy level decreases.

To know more about energy visit:-

https://brainly.com/question/1932868

#SPJ4

The force imparted to one of the blocks is 14.59 N in magnitude.

To solve this problem, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration.

Let's denote the mass of the left block as m1 and the mass of the right block as m2. We can then write the following equations:

m1 * a = F - f

m2 * a = f

where a is the acceleration of both blocks, F is the magnitude of the applied force, and f is the frictional force acting on the blocks. Note that the acceleration is the same for both blocks because they are connected by a string.

The frictional force can be expressed as f = μ * N, where μ is the coefficient of friction and N is the normal force. The normal force acting on the blocks is equal to their weight, which can be expressed as m1 * g and m2 * g, respectively.

Substituting the expression for the frictional force into the first equation and solving for F, we get:

F = m1 * a + μ * m1 * g

Substituting the given values, we get:

F = (m1 + m2) * a + μ * (m1 + m2) * g

F = (m1 + m2) * 5.2 + 0.4 * (m1 + m2) * 9.8

F = 5.2 * (m1 + m2) + 3.92 * (m1 + m2)

F = 9.12 * (m1 + m2)

Now, we need to find the value of m1 + m2. We are not given their individual masses, but we know that the ratio of their masses is 2:3. Let's denote the smaller mass as m and the larger mass as 1.5m. Then we have:

m + 1.5m = 2.5m

1.5m/m = 3/2

So the masses are m = 2/5 and 1.5m = 6/5.

Substituting these values into the expression for F, we get:

F = 9.12 * (2/5 + 6/5)

F = 9.12 * 8/

F = 14.59 N

For more questions on magnitude-

https://brainly.com/question/24256733

#SPJ4

Answer:

Explanation:

As you throw a book upward, two types of energy are given to the book:

Kinetic Energy: The book gains kinetic energy as it speeds up while you throw it upwards.

Potential Energy: The book gains potential energy as it moves upward against gravity.

The energy to throw the book comes from the food we eat, which provides the body with potential energy in the form of glucose. This glucose is broken down in the cells of our body, and the energy released is used to perform physical activities like throwing a book upwards.

The energy transformation involved in this process is the conversion of potential energy stored in the glucose molecule into kinetic energy of the body and ultimately into potential energy of the book. The energy transformation is an example of the Law of Conservation of Energy, which states that energy cannot be created or destroyed but can only be transformed from one form to another.

The electric field's magnitude at point P with coordinates is 8.85 mm. E= 2ϵ o/σ and l= 10 −7 ∧2×50×8.85×10 −12

E=σ2ϵ0. The proximity of P to the infinitely charge sheet has no bearing on this. The lines of something like the magnetic charge are continuous, homogenous parallel lines.

E = /20r is the magnitude of the electric field produced by an infinite line that is uniformly charged, where r is the distance between the line and the spot where the field is being measured and represents the linear charges density.

The formula is = Q 0. The electric field produced by an infinite thin sheet that is equally charged is given by the equation E=20n, where E is just the electric field, is the area positive charge, and 0 is the electric constant.

To know more about infinite line visit:

brainly.com/question/14568868

#SPJ1

If a sample that has a density of 3.3 g/mL is taken to the moon, the value of the density does not change.

The simple reason for this reason is density depends on mass and volume. The whole reason for this is that gravity does not depend on mass and volume.

Density can be explained as a measure of mass per unit volume. It is a very intensive property, which means that its value does not change depending on the size of the object. In physics, density can be explained is the ratio obtained from the mass of an object to its volume. It is often also defined as mass per unit volume.

Learn more about Density:

brainly.com/question/15164682

#SPJ4

The density of a sample with a density of 3.3 g/mL would not change if taken to the moon.

The density of a material depends on its mass and volume, both of which are affected by the gravitational force acting on the material. On the moon, the gravitational force is about 1/6th of that on Earth, so the mass and weight of the sample would change.

However, the density of the sample would remain the same, regardless of its location. Density is defined as mass per unit volume, so as long as the mass and volume of the sample do not change, its density will remain constant. The value of 3.3 g/mL is a property of the material itself and is not affected by the gravitational force or location. Therefore, the density of a sample with a density of 3.3 g/mL would not change if taken to the moon.

Learn more about density here: brainly.com/question/29775886

#SPJ4

The gravitational force acting on satellite at an altitude R causes the centripetal acceleration it required.

Thus,  (2R) 2 GMm = 2Rmv 2

The required speed to do this—known as the circular satellite velocity—is around 8 kph, or 17,500 mph in more commonly used quantities. See how gravity affects the orbits of the Earth, Moon, and International Space Station in this additional PhET interactive.

While elliptically circling the planet, a satellite will accelerate as its height (or distance from the world) decreases and decelerate as its height (or distance from the earth) increases.

learn more about satellite

https://brainly.com/question/28103637

#SPJ1

he minimum value of v is determined by the forces acting on the sphere. The forces acting on the sphere are gravity, tension in the wires AC and BC, and the centripetal force.

The centripetal force is equal to the product of the mass of the sphere and its velocity squared, divided by the radius of its orbit. Since the sphere is in equilibrium, these forces must be in balance. Therefore, the minimum value of v can be determined by setting the gravity force and the tension in the wires equal to the centripetal force. This gives us:

mv2/r = TAC + TBC

where m is the mass of the sphere, v is the velocity, r is the radius of the orbit, and TAC and TBC are the tensions in the wires AC and BC respectively.

Solving for v gives:

v = sqrt(TAC + TBC * (r/m))

Substituting the values given in the problem, we get:

v = sqrt((TAC + TBC) * (1.6/5))

Therefore, the minimum value of v is:

v = sqrt(TAC + TBC) = sqrt(2 * (1.6/5)) = 0.96 m/s

To learn more about gravity

brainly.com/question/4014727

#SPJ4

The forces operating on the sphere define the minimal value of v. The sphere is subject to the forces of gravity, centripetal force, and tension in wires AC and BC.

The centripetal force is determined by multiplying the sphere's mass by its velocity squared and dividing the result by the radius of its orbit. These forces must be in balance for the sphere to be in equilibrium. As a result, the minimum value of v can be calculated by setting the centripetal force, gravity force, and wire tension to the same value. This results in:

mv2/r = TAC + TBC

where m is the mass of the sphere, v is the velocity, r is the radius of the orbit, and TAC and TBC are the tensions in the wires AC and BC respectively.

Solving for v gives:

v = sqrt(TAC + TBC * (r/m))

Substituting the values given in the problem, we get:

v = sqrt((TAC + TBC) * (1.6/5))

Therefore, the minimum value of v is:

v = sqrt(TAC + TBC) = sqrt(2 * (1.6/5)) = 0.96 m/s

Learn more about centripetal force here brainly.com/question/14249440

#SPJ4

The concept of relative velocity. When the two pucks collide, they will have the same final velocity, so we can treat the collision as an elastic collision in one dimension.

Conservation of momentum:

m_A * v_A + m_B * v_B = (m_A + m_B) * v_f

where m_A and m_B are the masses of pucks A and B, respectively, v_A and v_B are their initial velocities, and v_f is their final velocity.

Since the two pucks have identical masses, we can simplify this to:

v_f = (v_A + v_B) / 2 = (1.90 m/s + 2.70 m/s) / 2 = 2.30 m/s

Relative velocity:

The relative velocity between the two pucks is:

v_rel = v_B - v_A = 2.70 m/s - 1.90 m/s = 0.80 m/s

The time it takes for the two pucks to collide is:

t = d / v_rel = 7.43 m / 0.80 m/s = 9.29 s

The distance covered by puck A before the collision is:

d_A = v_A * t = 1.90 m/s * 9.29 s = 17.65 m

To know more about relative velocity , check out :

https://brainly.com/question/17228388

#SPJ4

The process that causes thermal conduction in metals and nonmetals is the movement of free electrons or phonons.

Thermal conduction is the transfer of heat energy through a material by the movement of particles.

In both metals and non-metals, thermal conduction occurs due to the movement of free electrons or phonons, which are vibrations in the lattice structure of a material. In metals, free electrons move through the lattice and collide with atoms, transferring thermal energy from one part of the material to another.

In non-metals, phonons carry thermal energy through the lattice by transferring energy between neighboring atoms through vibrations. Both processes involve the transfer of energy through a material without the bulk movement of particles, resulting in the conduction of heat.

More on thermal conductivity can be found here: https://brainly.com/question/7643131

#SPJ1

The wall will push with a force of 50N.

According to Newton's third law of motion, for every action, there is an equal and opposite reaction. This means that if you push on the wall with a force of 50 N, the wall will push back on you with an equal force of 50 N in the opposite direction.

So, the answer to the question "If you stand next to a wall on a frictionless skateboard and push the wall with a force of 50 N, how hard does the wall push on you?" is 50 N.

It is important to note that the units of force are Newtons (N), so it is important to include these units in the answer.

In conclusion, if you push on a wall with a force of 50 N, the wall will push back on you with an equal force of 50 N in the opposite direction.

The answer to this question is, therefore, that the wall will exert a force of 50 N.

To know more about force, refer here:

https://brainly.com/question/13191643#

#SPJ11

To find the net electric field at the center of a rectangle formed by four point charges, the principle of superposition can be used.

The principle of superposition is a fundamental concept in physics and engineering that describes the way that linear systems interact with one another. It states that when two or more linear systems are combined, the resulting effect of their combined inputs is equal to the sum of their individual effects. This means that the output of the system in response to the combined inputs is simply the sum of the outputs that would result from each input separately.

The principle of superposition is a powerful tool for solving complex problems in physics and engineering. It allows engineers and scientists to break down a complex system into smaller, more manageable parts and to calculate the overall effect of each part separately before combining them to find the overall effect of the system as a whole.

To find the net electric field at the centre of a rectangle formed by four point charges.

Assuming the rectangle has sides of length L and the charges are all equal in magnitude, with value q, we can find the electric field at the center of the rectangle as follows:

1. For each corner charge, the distance to the center of the rectangle is sqrt(2) * L / 2, since this is the diagonal distance from one corner to the center.

2. Using Coulomb's law, we can calculate the electric field created by each corner charge at the centre of the rectangle as follows:

E = k * q / r^2

E = k * q / (sqrt(2) * L / 2)^2

E = (2 * k * q) / L^2

3. Since two of the electric fields will point in the same direction and two will point in the opposite direction, subtract the magnitudes of the two opposing electric fields and add the two remaining electric fields together to find the net electric field at the center of the rectangle.

Net electric field = (2 * k * q) / L^2 - (2 * k * q) / L^2 + (2 * k * q) / L^2 - (2 * k * q) / L^2

Net electric field = 0

4. In this case, since the magnitudes of the opposing electric fields cancel out, the net electric field at the center of the rectangle is zero.

Note that this is just an example calculation and the specific values and dimensions of the rectangle and charges will affect the final result.

To know more about The Principle of Superposition, visit

https://brainly.com/question/11876333

#SPJ4

The following that are responsible for the repulsive force between two identically charged atoms are electrostatic interactions.

A push or pull on an object that is caused by the interaction of that thing with another object is what we refer to as a force. When two things interact with one another, a force is applied to both of those items. Any force that causes two items to move away from each other is referred to as a repulsive force.

Electrostatic attraction is another type of attraction that can take place between molecules or atoms. On the other hand, it does not create a bond. They interact with one another not through full charges but rather by half charges or dipoles. Electrostatic interactions can either be attractive or repulsive. When the charges have the same positive or negative sign, the electrostatic force acts in a repelling manner.

Your question is incomplete, but most probably your full question was:

Which of the following are responsible for the repulsive force between two identically charged atoms?

van der Waals interactions

covalent bonds

hydrogen bonds

electrostatic interactions

hydrophobic interactions

To learn more about repulsive force, click here:

https://brainly.com/question/3489195

#SPJ4

The position of John at time of 4.35 s is -1.13 m

we know that,

at time, t = 0, the initial velocity, u = - 2 m/s

at time, t = 5 s, the final velocity, v = 2 m/s

Acceleration = Δ velocity/ Δ  time

Acceleration = v₂-v₁/ t₂-t₁

Acceleration = 2- (-2)/ 5-0 = 4/5= 0.8 m/s²

x(t) = ut +1/2 at²

u is velocity

t is time

a is acceleration

x(t) = ut +1/2 at²

x(4.35) = (-2 x 4.35) +0.5 x0.8x(4.35)²

x(4.35) = -8.7 +7.569

x(4.35) = - 1.13 m

Thus, the position of John at time of 4.35 s is -1.13 m

Learn more about displacement here: brainly.com/question/19144777

#SPJ4

Answer:

Experiments are often performed in labs due to safety issues and certain equipement that cannot e taken outside.

Explanation:

Answer

Answer: This is because all of your equipment is readily available, not only that, it’s always better to be in a rather controlled environment!

Explanation: Hope the answer helps!, next time be a little more specific.

Three vectors A, B, and C have the following x and y components: x component 6 -3 2, y component -3 4 5. The magnitude of the resultant sum of A, B, and C

To find the magnitude of the resultant sum of vectors, you can use the Pythagorean theorem and trigonometric functions. Now using the Pythagorean theorem:

|A + B + C| = sqrt[(6-3)^2 + (-3+4)^2] + (2+5)^2]

|A + B + C| = sqrt[3^2 + 1^2 + 7^2]

|A + B + C| = sqrt[59]

Therefore, the magnitude of the resultant sum of A, B, and C is sqrt[59]. Overall, finding the magnitude of the resultant sum of vectors involves combining the individual vectors then using either the Pythagorean theorem or trigonometric functions to determine magnitude and direction of resultant vector.

To know more about Pythagorean theorem, here

https://brainly.com/question/16426393

#SPJ4

The correct answer is C. -3 nC.

When a charge is placed inside a hollow cavity of metal, the metal will rearrange its charges to cancel out the charge inside the cavity. This means that the exterior surface of the metal will have a charge opposite to the charge inside the cavity.

In this case, since the charge inside the cavity is +3 nC, the charge on the exterior surface of the metal will be -3 nC. This is known as the principle of charge neutrality.

Therefore, when a charge of +3nC is placed in a hollow cavity inside a large chunk of metal that is electrically neutral, the total charge on the exterior surface of the metal is C. -3 nC.

To know more about charges, refer here:

https://brainly.com/question/3412043#

#SPJ11

The speed of the phone just before touching the ground is approximately 3.92 m/s.

We can use the conservation of energy to find the speed of the phone just before touching the ground. Initially, the phone has potential energy due to its height above the ground, which is converted into kinetic energy just before the phone touches the ground.

The potential energy of the phone just before it is dropped is:

[tex]PE = mgh[/tex]

where m is the mass of the phone, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the phone above the ground (1.50 m). Thus, the initial potential energy of the phone is:

[tex]PE = (0.65 kg)(9.81 m/s^2)(1.50 m) = 9.57 J[/tex]

As the phone is dropped, gravity does 8.80 J of work on the phone. This work is converted into kinetic energy just before the phone touches the ground. Thus, the final kinetic energy of the phone just before it touches the ground is:

[tex]KE = W = 8.80 J[/tex]

The kinetic energy of an object is given by:

[tex]KE = (1/2)mv^2[/tex]

where v is the speed of the object.

Thus, we can solve for the speed of the phone just before it touches the ground:

[tex]v = sqrt(2KE/m) = sqrt(2(8.80 J)/(0.65 kg)) = 3.92 m/s[/tex]

Therefore, the speed of the phone just before touching the ground is approximately 3.92 m/s.

Learn more about conservation of energy, here:

https://brainly.com/question/13949051

#SPJ9