Answers
Answer:
4x/7 = product of 4 times x divided by 7
2x-5 = five subtracted by two times the product of x
2(x+5) = two times the product of x and 5
4x+7 = the product of 4 times x and 7
3/x-2 = the last one (too lazy to type lol)
Hope this helps! :)
Related Questions
In order for a satellite to move in a stable
circular orbit of radius 6761 km at a constant
speed, its centripetal acceleration must be
inversely proportional to the square of the
radius r of the orbit. What is the speed of the satellite?
Find the time required to complete one orbit.
Answer in units of h.
The universal gravitational constant is
6. 67259 × 10^−11 N · m2/kg2 and the mass of
the earth is 5. 98 × 10^24 kg. Answer in units of m/s
Answers
The required answers are the speed of the satellite is `7842.6 m/s` and the time required to complete one orbit is `1.52 hours`.
Given that a satellite moves in a stable circular orbit of radius r = 6761 km and at constant speed.
And its centripetal acceleration is inversely proportional to the square of the radius r of the orbit. We need to find the speed of the satellite and the time required to complete one orbit.
Speed of the satellite:
We know that centripetal acceleration is given by the formula
`a=V²/r`
Where,a = centripetal accelerationV = Speed of the satellite,r = Radius of the orbit
The acceleration due to gravity `g` at an altitude `h` above the surface of Earth is given by the formula `
g = GM/(R+h)²`,
where `M` is the mass of the Earth, `G` is the gravitational constant, and `R` is the radius of the Earth.
Here, `h = 6761 km` (Radius of the orbit) Since `h` is much smaller than the radius of the Earth, we can assume that `R+h ≈ R`, where `R = 6371 km` (Radius of the Earth)
Then, `g = GM/R²`
Substituting the values,
`g = 6.67259 × 10^-11 × 5.98 × 10^24 / (6371 × 10^3)²``g = 9.81 m/s²`
Therefore, centripetal acceleration `a = g` at an altitude `h` above the surface of Earth.
Substituting the values,
`a = 9.81 m/s²` and `r = 6761 km = 6761000 m`
We have `a = V²/r` ⇒ `V = √ar`
Substituting the values,`V = √(9.81 × 6761000)`
⇒ `V ≈ 7842.6 m/s`
Therefore, the speed of the satellite is `7842.6 m/s`.
Time taken to complete one orbit:We know that time period `T` of a satellite is given by the formula
`T = 2πr/V`
Substituting the values,`
T = 2 × π × 6761000 / 7842.6`
⇒ `T ≈ 5464.9 s`
Therefore, the time required to complete one orbit is `5464.9 seconds` or `1.52 hours` (approx).
To know more about acceleration please visit :
https://brainly.com/question/460763
#SPJ11
The prism below is made of cubes which measure 1/4 of an inch on one side what is the volume of the prism
Answers
The volume of the prism made of cubes, with each cube measuring 1/4 of an inch on one side, can be determined by calculating the total number of cubes and multiplying it by the volume of a single cube.
To find the volume of the prism, we need to determine the number of cubes that make up the prism and then multiply it by the volume of a single cube. Since each cube measures 1/4 of an inch on one side, its volume can be calculated by raising 1/4 to the power of 3, as the length, width, and height of the cube are equal.
The volume of a cube is given by the formula V = s^3, where s is the length of one side. In this case, s = 1/4. Substituting the value into the formula, we have V = (1/4)^3.
Simplifying the expression, (1/4)^3 is equal to 1/64. Therefore, the volume of a single cube is 1/64 cubic inches.
To find the volume of the prism, we need to determine the number of cubes that make up the prism. Without specific information about the dimensions or the number of cubes, we cannot calculate the exact volume of the prism.
In conclusion, to determine the volume of the prism made of cubes measuring 1/4 of an inch on one side, we need more information such as the dimensions or the number of cubes in the prism.
Learn more about volume of the prism here :
https://brainly.com/question/1578538
#SPJ11
Angelina orders lipsticks from an online makeup website. Each lipstick costs $7. 50. A one-time shipping fee is $3. 25 is added to the cost of the order. The total cost of Angelina’s order before tax is $87. 75. How many lipsticks did she order? Label your variable. Write and solve and algebraic equation. Write your answer in a complete sentence based on the context of the problem. (Please someone smart answer!)
Answers
Angelina ordered 10 lipsticks from the online makeup website. The total cost of Angelina’s order before tax is $87. 75. We are asked to determine the total number of lipsticks she ordered.
Let's denote the number of lipsticks Angelina ordered as 'x'. Each lipstick costs $7.50, so the cost of 'x' lipsticks is 7.50x. Additionally, a one-time shipping fee of $3.25 is added to the total cost. Therefore, the total cost of Angelina's order before tax can be expressed as:
Total cost = Cost of lipsticks + Shipping fee
87.75 = 7.50x + 3.25
To find the value of 'x', we need to solve the equation. Rearranging the equation, we have:
7.50x = 87.75 - 3.25
7.50x = 84.50
x = 84.50 / 7.50
x = 11.27
Since the number of lipsticks cannot be a fraction, we can round down to the nearest whole number. Therefore, Angelina ordered 10 lipsticks from the online makeup website.
In conclusion, Angelina ordered 10 lipsticks based on the given information and the solution to the algebraic equation.
Learn more about fraction here:
https://brainly.com/question/10354322
#SPJ11
find a matrix b such that b2 3b = 4a.
Answers
The matrix b can be expressed as:
b = (-3 + sqrt(9 + 16a)) / 2 * I + (-3 - sqrt(9 + 16a)) / 2 * (1/3) * (3b)
To solve for matrix b, we can use algebraic manipulation. Starting with the given equation:
b^2 3b = 4a
We can rearrange the terms to isolate b on one side:
b^2 3b - 4a = 0
Now we have a quadratic equation in b. We can solve for b by using the quadratic formula:
b = (-3 ± sqrt(3^2 - 4(1)(-4a))) / (2(1))
b = (-3 ± sqrt(9 + 16a)) / 2
We end up with two possible values of b:
b = (-3 + sqrt(9 + 16a)) / 2
b = (-3 - sqrt(9 + 16a)) / 2
Therefore, the matrix b can be expressed as:
b = (-3 + sqrt(9 + 16a)) / 2 * I + (-3 - sqrt(9 + 16a)) / 2 * (1/3) * (3b)
where I is the identity matrix and 3b is the matrix on the right-hand side of the original equation.
To know more about matrix refer here:
https://brainly.com/question/29132693
#SPJ11
Which of the following is true? I. In a t-test for a single population mean, increasing the sample size (while everything else the same) changes the number of degrees of freedom used in the test. II. In a chi-square test for independence, increasing the sample size (while everything else the same) changes the number of degrees of freedom used in the test. III. In a t-test for the slope of the population regression line, increasing the number of observations (while leaving everything else the same) changes the number of degrees of freedom used in the test. (A) I only (B) I and II only (C) I and III only (D) II and III only (E) I, II and III
Answers
The correct option is (C) I and III only. Let's see how:
I. True. In a t-test for a single population mean, increasing the sample size (while everything else remains the same) changes the number of degrees of freedom used in the test. The degrees of freedom for a single population mean t-test is calculated as (sample size - 1), so when the sample size increases, the degrees of freedom also increase.
II. False. In a chi-square test for independence, increasing the sample size (while everything else remains the same) does not change the number of degrees of freedom used in the test. The degrees of freedom in a chi-square test for independence are calculated as (number of rows - 1) x (number of columns - 1), which is not affected by the sample size.
III. True. In a t-test for the slope of the population regression line, increasing the number of observations (while leaving everything else the same) changes the number of degrees of freedom used in the test. The degrees of freedom for a regression slope t-test is calculated as (number of observations - 2), so when the number of observations increases, the degrees of freedom also increase.
Learn more about chi-square test here, https://brainly.com/question/4543358
#SPJ11
compute the (sample) variance and standard deviation of the data sample. (round your answers to two decimal places.) −9, 9, 9, 9, 0, 6 variance standard deviation
Answers
The sample variance is 52.80, and the standard deviation is approximately 7.27.
To compute the sample variance and standard deviation of the data sample (-9, 9, 9, 9, 0, 6), follow these steps:
1. Calculate the mean (average) of the data set: (-9 + 9 + 9 + 9 + 0 + 6) / 6 = 24 / 6 = 4
2. Subtract the mean from each data point and square the result: [(-9-4)², (9-4)², (9-4)², (9-4)², (0-4)², (6-4)²] = [169, 25, 25, 25, 16, 4]
3. Sum the squared differences: 169 + 25 + 25 + 25 + 16 + 4 = 264
4. Divide the sum by (n-1) for the sample variance, where n is the number of data points: 264 / (6-1) = 264 / 5 = 52.8
5. Take the square root of the variance for the standard deviation: √52.8 ≈ 7.27
To know more about sample variance click on below link:
https://brainly.com/question/13708253#
#SPJ11
if for all m and n implies that and for two functions then what may we conclude about the behavior of these functions as n increases? what may we conc
Answers
The specific statement that follows "if for all m and n" cannot make any specific conclusions about the behavior of the functions as n increases.
Without knowing the specific statement that follows "if for all m and n" it is difficult to make any conclusions about the behavior of the functions as n increases.
The statement includes some kind of bound or limit as n increases then we can conclude that the behavior of the functions is constrained in some way as n increases.
The statement is "if for all m and n f(n) ≤ g(n)" then we can conclude that the function f(n) is bounded by g(n) as n increases.
This means that as n gets larger and larger f(n) will never exceed g(n). Alternatively if the statement is "if for all m and n f(n) → L as n → ∞" then we can conclude that the function f(n) approaches a limit L as n gets larger and larger.
This means that the behavior of f(n) becomes more and more predictable and approaches a fixed value as n increases.
For similar questions on functions
https://brainly.com/question/25638609
#SPJ11
20 POINTS! PLEASE HELP
There is a stack of 10 cards, each given a different number from 1 to 10. Suppose we select a card randomly from the stack, replace it, and then randomly select another card. What is the probability that the first card is an odd number and the second card is less than 4? Write your answer as a fraction in the simplest form
Answers
The probability of selecting an odd number on the first draw and a number less than 4 on the second draw is 3/20.
To solve this problem, we need to consider the probability of each event separately and then multiply them together to get the probability of both events happening together.
First, let's consider the probability of selecting an odd number on the first draw. There are five odd numbers (1, 3, 5, 7, 9) out of ten total cards, so the probability of selecting an odd number on the first draw is 5/10 or 1/2.
Next, let's consider the probability of selecting a number less than 4 on the second draw. There are three such cards (1, 2, 3) out of ten remaining cards (since we replaced the first card), so the probability of selecting a number less than 4 on the second draw is 3/10.
To find the probability of both events happening together (i.e. selecting an odd number on the first draw and a number less than 4 on the second draw), we multiply the probabilities of each event:
P(odd number on first draw) * P(number less than 4 on second draw) = (1/2) * (3/10) = 3/20
Therefore, the probability of selecting an odd number on the first draw and a number less than 4 on the second draw is 3/20.
For more questions on probability
https://brainly.com/question/30460538
#SPJ11
If there is a package of 3 books that cost 3. 29 how much does each book cost
Answers
We need to divide the total cost by the number of books in the package. Each book costs approximately $1.10.
To find out how much each book costs, we can use the concept of unit rate. Unit rate is a ratio of two quantities, where the denominator is always one. In this case, we want to find the cost of one book, so we need to divide the total cost by the number of books in the package.
Let x be the cost of one book. Then we have:
3x = 3.29
To solve for x, we can divide both sides by 3:
x = 3.29/3
x ≈ 1.10
Learn more about cost at: brainly.com/question/14566816
#SPJ11
A researcher wanted to determine if carpeted rooms contain more bacteria than uncarpeted rooms. The table shows the results for the number of bacteria per cubic foot for both types of rooms.Carpeted: 7, 11.9, 9.8, 15.1, 11.9, 14.6, 7.9, 15.3.Uncarpeted: 8.6, 8, 6.3, 8.7, 13.6, 11.3, 12, 9.9Determine whether carpeted rooms have more bacteria than uncarpeted rooms at the alpha equals 0.01α=0.01 level of significance. Normal probability plots indicate that the data are approximately normal and boxplots indicate that there are no outliers.A) State the null and alternative hypotheses. Let population 1 be carpeted rooms and population 2 be uncarpeted rooms?B) Determine the P-value for this hypothesis test. P=?C) State the appropriate conclusion. Choose the correct answer below.- Upper H 0H0. There isis significant evidence at the alpha equals 0.01α=0.01 level of significance to conclude that carpeted rooms have more bacteria than uncarpeted rooms.-Do not reject Upper H 0H0. There is not significant evidence at the alpha equals 0.01α=0.01 level of significance to conclude that carpeted rooms have more bacteria than uncarpeted rooms.- Reject Upper H 0H0. There is not significant evidence at the alpha equals 0.01α=0.01 level of significance to conclude that carpeted rooms have more bacteria than uncarpeted rooms.- Reject Upper H 0H0. There is significant evidence at the alpha equals 0.01α=0.01 level of significance to conclude that carpeted rooms have more bacteria than uncarpeted rooms.
Answers
A) The null and alternative hypotheses are:
Null Hypothesis H0: The mean number of bacteria per cubic foot in carpeted rooms is equal to the mean number of bacteria per cubic foot in uncarpeted rooms. That is, µ1 = µ2.Alternative Hypothesis H1: The mean number of bacteria per cubic foot in carpeted rooms is greater than the mean number of bacteria per cubic foot in uncarpeted rooms. That is, µ1 > µ2.B We can perform a two-sample t-test with equal variances to test the hypothesis. Using a statistical software or calculator, the test statistic is:
t = 1.4636, degrees of freedom = 14, and p-value = 0.0832
C) Since the p-value (0.0832) is greater than the significance level (0.01), we fail to reject the null hypothesis.
How to explain the hypothesisThe null hypothesis is that there is no difference between the mean number of bacteria per cubic foot in carpeted rooms and uncarpeted rooms. The alternative hypothesis is that the mean number of bacteria per cubic foot is higher in carpeted rooms than in uncarpeted rooms.
The two-sample t-test with equal variances is appropriate because we are comparing the means of two independent samples of continuous data that are approximately normally distributed. The test statistic is t = 1.4636, which measures how many standard errors the sample means are from each other.
Therefore, there is not significant evidence at the alpha equals 0.01 level of significance to conclude that carpeted rooms have more bacteria than uncarpeted rooms. The appropriate conclusion is: do not reject H0.
Learn more about hypothesis on
https://brainly.com/question/11555274
#SPJ1
Catalina chooses to buy only two books for catalina to buy then find how much money she will have left
Answers
Using the unitary method, we determined that Catalina can buy 6 books after the price increase, and she will have no money left. Initially, she could buy 15 books for RS 30 each, but the price increase of RS 45 changed the cost of each book to RS 5.
Let's start by finding the cost of one book before the price increase. We know that Catalina had enough money to buy 15 books for RS 30 each, so the cost of one book is RS 30/15 = RS 2.
According to the unitary method, the increase in cost is distributed equally among the books. So, the increase in cost for each book is RS 45/15 = RS 3. Therefore, the new cost of one book is
=> RS 2 (old cost) + RS 3 (increase) = RS 5.
Now that we know the new cost of one book, we can find how many books Catalina can buy with her available money. Catalina initially had enough money to buy 15 books, and the cost of one book is RS 5.
So, the number of books she can buy now is
=> RS 30 (initial money) ÷ RS 5 (new cost per book) = 6 books.
Finally, to calculate how much money Catalina will have left, we need to subtract the total cost of the books she can buy now from her initial money.
The total cost of the books she can buy now is
=> RS 5 (new cost per book) × 6 (number of books) = RS 30.
Therefore, Catalina will have
=> RS 30 (initial money) - RS 30 (total cost of books) = RS 0 left.
To know more about unitary method here
https://brainly.com/question/28276953
#SPJ4
Complete Question:
Catalina had enough money to buy 15 books for RS 30 each. If the price of each book increases resulting in the total cost increase of rupees 45, how many books can she buy now? How much money will be left with her?
random samples of size and equals 500 were selected from a binomial population with p equals .1 . Check to make sure that it is appropriate to use the normal distribution to approximate the sampling distribution of p. Then use this result to find the probabilities in Exercises a-c.
a. ^
p
>
0.12
.
b. ^
p
<
0.10
.
c. ^
p
lies within 0.02
of p
.
Answers
a) The probability that ^p > 0.12 is 0.1711.
b) The probability that ^p < 0.10 is 0.5.
c) The probability that the sample proportion ^p lies within 0.02 of p is 0.6247.
a. We want to find the probability that the sample proportion ^p is greater than 0.12. We can standardize the sample proportion using the formula z = (^p - p) / √(pq/n), which gives us
=> z = (0.12 - 0.1) / 0.02099 = 0.954.
We can then use a standard normal distribution calculator to find the probability that Z > 0.954, which is approximately 0.1711.
b. We want to find the probability that the sample proportion ^p is less than 0.10. Again, we can standardize using the formula z = (^p - p) / √(pq/n), which gives us
=> z = (0.10 - 0.1) / 0.02099 = 0.
We can then find the probability that Z < 0 using a standard normal distribution table or calculator, which is approximately 0.5.
c. We want to find the probability that the sample proportion ^p lies within 0.02 of p. This means we want to find P(0.08 < ^p < 0.12).
We can standardize both values using the formula z = (^p - p) / sqrt(pq/n), which gives us
=> z = (0.08 - 0.1) / 0.02099 = -0.954
and
=> z = (0.12 - 0.1) / 0.02099 = 0.954.
We can then find the probability that -0.954 < Z < 0.954 using a standard normal distribution calculator, which is approximately 0.6247.
To know more about probability here
https://brainly.com/question/11234923
#SPJ4
Complete Question:
Random samples of size and equals 500 were selected from a binomial population with p equals 1 .
Check to make sure that it is appropriate to use the normal distribution to approximate the sampling distribution of p.
Then use this result to find the probabilities in Exercises a-c.
a. ^p > 0.12.
b. ^p < 0.10.
c. ^p lies within 0.02 of p.
The diagonals of parallelogram PQRS intersect at Z. Select all the statements that must be true.
A
QZ = SZ
В. Qs
RP
C. ZQZR = ZQZP
D. ZQRP = ZSRP
E ZQZP = ZRZS
Answers
The statements that must be true are A, C, and E.
The correct statements that must be true for the diagonals of parallelogram PQRS that intersect at Z are given below:A. QZ = SZBecause the diagonals of a parallelogram bisect each other, therefore QZ = SZB. QsRPThis is not necessarily true because PQRS is a parallelogram and not necessarily a rhombus.C. ZQZR = ZQZPThis statement is true because PQRS is a parallelogram.D. ZQRP = ZSRPThis is not necessarily true because PQRS is a parallelogram and nnecessarily a kite.E. ZQZP = ZRZSThis statement is true because PQRS is a parallelogram.Therefore, the statements that must be true are A, C, and E.
Learn more about Diagonal here,*. If (2,3) and (-6,5) are the end points of diagonal of a square. Find the equation of another diagonal.
Please help w...
https://brainly.com/question/17759194
#SPJ11
solve the following logarithmic equation: \ln(x 31) - \ln(4-3x) = 5\ln 2ln(x 31)−ln(4−3x)=5ln2.
Answers
The solution to the given logarithmic equation is x = 1.
What is the first property of logarithms?The given logarithmic equation is:
ln(x+31) - ln(4-3x) = 5ln2
We can use the first property of logarithms, which states that ln(a) - ln(b) = ln(a/b), to simplify the left-hand side of the equation:
ln(x+31)/(4-3x) = ln(2^5)
We can further simplify the right-hand side using the second property of logarithms, which states that ln(a^b) = b*ln(a):
ln(x+31)/(4-3x) = ln(32)
Now, we can equate the arguments of the logarithms on both sides:
(x+31)/(4-3x) = 32
Multiplying both sides by (4-3x), we get:
x + 31 = 32(4-3x)
Expanding the right-hand side, we get:
x + 31 = 128 - 96x
Bringing all the x-terms to one side, we get:
x + 96x = 128 - 31
Simplifying, we get:
97x = 97
Finally, dividing both sides by 97, we get:
x = 1
Therefore, the solution to the given logarithmic equation is x = 1.
Note that we must check the solution to make sure it is valid, as the original equation may have restrictions on the domain of x. In this case, we can see that the arguments of the logarithms must be positive, so we must check that x+31 and 4-3x are both positive when x = 1. Indeed, we have:
x+31 = 1+31 = 32 > 0
4-3x = 4-3(1) = 1 > 0
Therefore, the solution x = 1 is valid.
Learn more about logarithms
brainly.com/question/30085872
#SPJ11
Tides The length of time between consecutive high tides is 12 hours and 25 minutes. According to the National Oceanic and Atmospheric Administration, on Saturday, March 28, 2015, in Charleston, South Carolina, high tide occurred at 2:12 am (2.2 hours) and low tide occurred at 8:18 am (8.3 hours). Water heights are measured as the amounts above or below the mean lower low water. The height of the water at high tide was 5.27 feet, and the height of the water at low tide was 0.87 foot.(a) Approximately when will the next high tide occur? (b) Find a sinusoidal function of the form y = A sin(wx – ) + B that models the data.
Answers
Answer:
Step-by-step explanation:
(a) The length of time between consecutive high tides is 12 hours and 25 minutes. Therefore, the next high tide will occur 12 hours and 25 minutes after the previous one, which was at 2:12 am.
2:12 am + 12 hours and 25 minutes = 2:37 pm
So, the next high tide will occur at approximately 2:37 pm.
(b) To find a sinusoidal function that models the data, we need to determine the amplitude, period, phase shift, and vertical shift of the function.
Amplitude:
The height of the water at high tide was 5.27 feet, and the height of the water at low tide was 0.87 foot. Therefore, the amplitude of the function is:
A = (5.27 - 0.87) / 2 = 2.2 feet
Period:
The length of time between consecutive high tides is 12 hours and 25 minutes, which is the period of the function:
P = 12 hours + 25 minutes/60 minutes = 12.42 hours
Frequency:
The frequency of the function is the reciprocal of the period:
w = 2π / P = 2π / 12.42 ≈ 0.506
Phase Shift:
The function reaches its maximum (high tide) when x is equal to the phase shift. On Saturday, March 28, 2015, high tide occurred at 2:12 am, which is 2.2 hours after midnight. Therefore, the phase shift is:
θ = -2.2
Vertical Shift:
The function is measured with respect to the mean lower low water. The height of the water at low tide was 0.87 foot, which is the vertical shift of the function:
B = 0.87
To Know more about Tides refer here
https://brainly.com/question/22677272#
#SPJ11
what are the solutions of the quadratic equation 2x^2-16x+32=0
Answers
Answer: x=4
Step-by-step explanation:
0=2x²-16x+32 >Take out GCF
0=2(x²-8x+16) >Find 2 numbers that multiple to last term, +16,
but add to middle term, -8
-4 and -4 multiply to +16 and add to -8
put -4 and -4 into factored form
0=2(x-4)(x-4) >Divide both sides by 2
0=(x-4)(x-4) >Normally you would set both parenthesis to 0
but they are the same so set the x-4=0
x-4=0
x=4
The arrivals of customers at a small shop follow a homogeneous Poisson process {N(t), t ≥ 0} with rate λ. Suppose that each customer spends a random amount of time, si in the shop, with distribution F and mean E(si) = μS. If a new customer arrives while another customer is in the shop, the new customer turns away and is lost.
Suppose that each customer spends a random amount of money, wi, with distribution G and mean E(wi) = μw. Let W(t) be the total sales of the shop up to time t.
Find limt→[infinity] W (t)/t.
Hint: in your solution let ti denote the time between customers who are served.
Answers
the limit of the ratio of the total sales to time is equal to the product of the arrival rate and the mean amount spent by a customer.
Let ti be the time between successive customers who are served. Then ti is the sum of the time spent by the customer being served (si) and the time until the next customer arrives (exponentially distributed with rate λ). Thus, we have ti ~ F + Exp(λ).
Now, let Ni be the number of customers who arrive during the i-th interval [ti-1, ti]. Then, Ni ~ Poisson(λ ti). Also, the total sales during this interval is the sum of the sales of the Ni customers who arrived during this interval. Therefore, the total sales during [ti-1, ti] is a random variable given by:
Si = ∑j=1 to N i Wj
where Wj denotes the random amount of money spent by the j-th customer. Since the Wj are independent and identically distributed, we have E(Si | Ni) = Ni μw.
Using the law of total probability, we have:
E(Si) = ∑k=0 to ∞ E(Si | Ni=k) P(Ni=k)
css
Copy code
= ∑k=0 to ∞ k μw P(Ni=k)
= λti μw
Now, let Tn = ∑i=1 to n ti be the time of the nth customer arrival. Then, W(tn) is the total sales up to time Tn. Therefore, we have:
W(tn) = S1 + S2 + ... + Sn
css
Copy code
= ∑i=1 to n Si
Taking the expectation of both sides and using the linearity of expectation, we get:
E(W(tn)) = ∑i=1 to n E(Si)
css
Copy code
= λ ∑i=1 to n ti μw
= λ Tn μw
Dividing both sides by tn, we get:
W(tn)/tn = (λ Tn μw)/tn
Now, taking the limit as tn → ∞, we get:
limt→∞ W(t)/t = λ μw
To learn more about random variable visit:
brainly.com/question/17238189
#SPJ11
Use theorem 7.4.2 to evaluate the given laplace transform. do not evaluate the integral before transforming. (write your answer as a function of s.) t
ℒ { ∫ sin(τ ) cos (t-τ )dτ }
0
Answers
The Laplace transform of the given integral is:
ℒ { ∫ sin(τ ) cos (t-τ )dτ } = [tex]s/(s^4+2s^2+1)[/tex]
Theorem 7.4.2 states that:
If the function f(t, τ) is continuous on the strip a ≤ Re{s} ≤ b and satisfies the growth condition |f(t, τ)| ≤ M e{γ|τ|} for some constant M and γ > 0, then
ℒ { ∫ f(t, τ) dτ } = F(s) G(s),
where F(s) = ℒ { f(t, τ) } with respect to t, and G(s) = 1/s.
Applying this theorem to the given Laplace transform, we have:
ℒ { ∫ sin(τ ) cos (t-τ )dτ } = F(s) G(s),
where F(s) = ℒ { sin(τ ) cos (t-τ ) } with respect to t, and G(s) = 1/s.
Using the Laplace transform definition, we have:
F(s) = ∫ [tex]e^{{-st}} sin(T ) cos (t-T ) dt[/tex]
= ∫ [tex]e^{-st} [ sin(T ) cos(t) - sin(T ) sin(T ) ] dT[/tex]
= ℒ{sin(τ)}(s) ℒ{cos(t)}(s) - ℒ{sin(τ)sin(t)}(s)
=[tex]1/(s^2+1) \timess/(s^2+1) - 1/[(s^2+1)^2][/tex]
= [tex]s/(s^4+2s^2+1)[/tex]
for such more question on Laplace transform
https://brainly.com/question/30401252
#SPJ11
The Laplace transform of the given integral, ℒ{∫ sin(τ) cos(t-τ) dτ}, is equal to [1/(s^2 + 4s)].
Theorem 7.4.2 states that the Laplace transform of the integral of a function f(τ) with respect to τ from 0 to t is equal to 1/s times the Laplace transform of f(t).
Using this theorem, we can evaluate the given Laplace transform:
ℒ{∫ sin(τ) cos(t-τ) dτ}
According to the theorem, we can rewrite the Laplace transform as:
1/s * ℒ{sin(t) cos(t)}
Now, let's find the Laplace transform of sin(t) cos(t):
ℒ{sin(t) cos(t)}
Using the product-to-sum formula for sine and cosine, we have:
sin(t) cos(t) = (1/2) * [sin(2t)]
Now, taking the Laplace transform of sin(2t):
ℒ{sin(2t)} = 2/(s^2 + 4)
Finally, substituting this result back into our previous expression, we get:
1/s * ℒ{sin(t) cos(t)} = 1/s * (1/2) * [2/(s^2 + 4)]
Simplifying, we obtain:
ℒ{∫ sin(τ) cos(t-τ) dτ} = 1/s * (1/2) * [2/(s^2 + 4)]
Therefore, the Laplace transform of the given integral, ℒ{∫ sin(τ) cos(t-τ) dτ}, is equal to [1/(s^2 + 4s)].
To learn more about Laplace transform, click here: https://brainly.com/question/30401252
#SPJ11
Xander has 10 pieces of twine he is using for a project. If each piece of twine is 1
/3 yards of twine does
xander have use propertions of operations to solve
Answers
To determine how many yards of twine Xander has in total, we can use proportions of operations to solve the problem.
Let's set up the proportion:
(1/3 yards of twine) / 1 piece of twine = x yards of twine / 10 pieces of twine
Now, we can cross-multiply and solve for x:
(1/3) / 1 = x / 10
1/3 = x/10
To solve for x, we can multiply both sides of the equation by 10:
10 * (1/3) = x
10/3 = x
Therefore, Xander has 10/3 yards of twine, which can be simplified to 3 1/3 yards of twine.
Learn more about proportions here:
https://brainly.com/question/1496357
#SPJ11
.Evaluate the line integral ∫C F⋅dr where F= 〈−4sinx, 4cosy, 10xz〉 and C is the path given by r(t)=(2t3,−3t2,3t) for 0 ≤ t ≤ 1
∫C F⋅dr = ...........
Answers
The value of the line integral ∫C F⋅dr = 1.193.
To evaluate the line integral ∫C F⋅dr, we first need to calculate F⋅dr, where F= 〈−4sinx, 4cosy, 10xz〉 and dr is the differential of the vector function r(t)= (2t^3,-3t^2,3t) for 0 ≤ t ≤ 1.
We have dr= 〈6t^2,-6t,3〉dt.
Thus, F⋅dr= 〈−4sinx, 4cosy, 10xz〉⋅ 〈6t^2,-6t,3〉dt
= (-24t^2sin(2t^3))dt + (-24t^3cos(3t))dt + (30t^3x)dt
Now we integrate this expression over the limits 0 to 1 to get the value of the line integral:
∫C F⋅dr = ∫0^1 (-24t^2sin(2t^3))dt + ∫0^1 (-24t^3cos(3t))dt + ∫0^1 (30t^3x)dt
The first two integrals can be evaluated using substitution, while the third integral can be directly integrated.
After performing the integration, we get:
∫C F⋅dr = 2/3 - 1/9 + 3/5 = 1.193
Therefore, the value of the line integral ∫C F⋅dr is 1.193.
In conclusion, we evaluated the line integral by calculating the dot product of the vector function F and the differential of the given path r(t), and then integrating the resulting expression over the given limits.
To know more about line integral refer here :
https://brainly.com/question/30763905#
#SPJ11
PLS HELP RLLY WUICKLY ILL GIEV BRAINLY
Solve and show your work for each question.
(a) What is 0.36 expressed as a fraction in simplest form?
(b) What is 0.36 expressed as a fraction in simplest form?
(c) What is 0.36 expressed as a fraction in simplest form?
Answers
a) 0.bar(36) expressed as a fraction in simplest form is 4/11. b) 0.3bar(6) expressed as a fraction in simplest form is 0.4. c) 0.36 expressed as a fraction in simplest form is 9/25.
Answer to tne aforementioned questions(a) To express 0.bar(36) as a fraction in simplest form, we can use the concept of repeating decimals. Let x = 0.bar(36). Multiplying x by 100 gives:
100x = 36.bar(36)
Subtracting the original equation from the multiplied equation eliminates the repeating part:
100x - x = 36.bar(36) - 0.bar(36)
99x = 36
x = 36/99
We can simplify this fraction by dividing both the numerator and denominator by their greatest common divisor, which is 9:
x = (36/9) / (99/9) = 4/11
Therefore, 0.bar(36) expressed as a fraction in simplest form is 4/11.
(b) o express 0.3bar(6) as a fraction in simplest form, let's call it x. Multiplying x by 10 gives:
10x = 3.6bar(6)
Subtracting the original equation from the multiplied equation eliminates the repeating part:
10x - x = 3.6bar(6) - 0.3bar(6)
9x = 3.6
x = 3.6/9
x = 0.4
Therefore, 0.3bar(6) expressed as a fraction in simplest form is 0.4.
(c) To express 0.36 as a fraction in simplest form, we can write it as 36/100 and simplify it. Both the numerator and denominator have a common factor of 4, so we can divide both by 4:
36/100 = 9/25
Therefore, 0.36 expressed as a fraction in simplest form is 9/25.
Learn more about fraction at https://brainly.com/question/78672
#SPJ1
the rate of change in data entry speed of the average student is ds/dx = 9(x + 4)^-1/2, where x is the number of lessons the student has had and s is in entries per minute.Find the data entry speed as a function of the number of lessons if the average student can complete 36 entries per minute with no lessons (x = 0). s(x) = How many entries per minute can the average student complete after 12 lessons?
Answers
The average student complete after 12 lessons is 57.74 entries per minute.
To find s(x), we need to integrate ds/dx with respect to x:
ds/dx = 9(x + 4)^(-1/2)
Integrating both sides, we get:
s(x) = 18(x + 4)^(1/2) + C
To find the value of C, we use the initial condition that the average student can complete 36 entries per minute with no lessons (x = 0):
s(0) = 18(0 + 4)^(1/2) + C = 36
C = 36 - 18(4)^(1/2)
Therefore, s(x) = 18(x + 4)^(1/2) + 36 - 18(4)^(1/2)
To find how many entries per minute the average student can complete after 12 lessons, we simply plug in x = 12:
s(12) = 18(12 + 4)^(1/2) + 36 - 18(4)^(1/2)
s(12) ≈ 57.74 entries per minute
Learn more about average here
https://brainly.com/question/130657
#SPJ11
The average student can complete 72 entries per minute after 12 lessons.
To find the data entry speed as a function of the number of lessons, we need to integrate the rate of change equation with respect to x.
Given: ds/dx = 9(x + 4)^(-1/2)
Integrating both sides with respect to x, we have:
∫ ds = ∫ 9(x + 4)^(-1/2) dx
Integrating the right side gives us:
s = 18(x + 4)^(1/2) + C
Since we know that when x = 0, s = 36 (no lessons), we can substitute these values into the equation to find the value of the constant C:
36 = 18(0 + 4)^(1/2) + C
36 = 18(4)^(1/2) + C
36 = 18(2) + C
36 = 36 + C
C = 0
Now we can substitute the value of C back into the equation:
s = 18(x + 4)^(1/2)
This gives us the data entry speed as a function of the number of lessons, s(x).
To find the data entry speed after 12 lessons (x = 12), we can substitute this value into the equation:
s(12) = 18(12 + 4)^(1/2)
s(12) = 18(16)^(1/2)
s(12) = 18(4)
s(12) = 72
Know more about integrate here:
https://brainly.com/question/18125359
#SPJ11
2. How much more is 8 tens than 10 ones
i. 2ones
ii. 2tens
iii. 7ones
iv. 7tens
Answers
Answer: 7 Tens
Step-by-step explanation:
We want to make a common number, so we can combines the ones into tens.
10 ones = 1 ten
Now we can easily subtract: 8 - 1 = 7
Therefore the answer is 7 Tens more
use the ratio test to determine whether the series is convergent or divergent. [infinity] k = 1 6ke−k identify ak. evaluate the following limit. lim k → [infinity] ak 1 ak since lim k → [infinity] ak 1 ak ? 1,
Answers
The series converges because the limit of the ratio test is < 1.
To determine if the series is convergent or divergent using the ratio test, you first need to identify a_k, which is the general term of the series. In this case, a_k = 6k [tex]e^-^k[/tex] . Then, evaluate the limit lim (k→∞) (a_(k+1) / a_k). If the limit is < 1, the series converges; if it's > 1, it diverges.
We have a_k = 6k [tex]e^-^k[/tex]. Apply the ratio test by finding lim (k→∞) (a_(k+1) / a_k) = lim (k→∞) [(6(k+1)[tex]e^-^(^k^+^1^)[/tex]))/(6k [tex]e^-^k[/tex])]. Simplify to get lim (k→∞) ((k+1)/k * e⁻¹). As k approaches infinity, the ratio approaches e⁻¹, which is < 1. Therefore, the series converges.
To know more about ratio test click on below link:
https://brainly.com/question/15586862#
#SPJ11
et f (x) = [infinity] xn n n=1 and g(x) = x3 f (x2/16). let [infinity] anxn n=0 be the taylor series of g about 0. the radius of convergence for the taylor series for f is
Answers
The radius of convergence is 1, and the radius of convergence of g(x) = x^3 f(x^2/16) is also 1.
What is the radius of convergence of f(x) = Σn=1∞ nx^n, and of g(x) about 0 is Σn=0∞ anx^n?The function f(x) = Σn=1∞ nx^n has a radius of convergence of 1 because the ratio test yields:
lim n→∞ |(n+1)x^(n+1) / (nx^n)| = |x| lim n→∞ (n+1)/n = |x|
This limit converges when |x| < 1, and diverges when |x| > 1. Thus, the radius of convergence is 1.
The function g(x) = x^3 f(x^2/16) can be written as g(x) = Σn=1∞ n(x^2/16)^n x^3, which simplifies to g(x) = Σn=1∞ (n/16)^n x^(2n+3). The Taylor series of g(x) about x=0 is:
g(x) = Σn=0∞ (g^(n)(0) / n!) x^n
where g^(n)(0) is the nth derivative of g(x) evaluated at x=0. By differentiating g(x) with respect to x, we find that g^(n)(x) = (2n+3)(2n+1)(2n-1)...(3)(1)(n/16)^n x^(2n+1). Therefore, g^(n)(0) = (2n+3)(2n+1)(2n-1)...(3)(1)(n/16)^n (0)^(2n+1) = 0 if n is odd, and g^(n)(0) = (2n+3)(2n+1)(2n-1)...(4)(2)(n/16)^n (0)^(2n+1) = 0 if n is even.
Since g^(n)(0) = 0 for all odd n, the Taylor series of g(x) only contains even powers of x. Thus, the radius of convergence of the Taylor series for g(x) is the same as the radius of convergence for f(x^2/16), which is also 1.
Learn more about convergence
brainly.com/question/31756849
#SPJ11
if s = { 1 1 n − 1 m : n, m ∈ n}, find inf(s) and sup(s)
Answers
In summary, the infimum of s is 1, and the supremum of s is 1 + 1/m, where m is any positive integer.
To find the infimum and supremum of the set s = {1 + 1/n - 1/m : n, m ∈ ℕ}, we need to determine the smallest and largest possible values that the elements of s can take.
First, we observe that every element of s is greater than or equal to 1, since both 1/n and 1/m are positive fractions, and 1 - 1/n - 1/m is always less than or equal to 1.
Next, we note that for any fixed value of n, as m increases, 1 - 1/n - 1/m decreases, and approaches 0 as m approaches infinity. This implies that the smallest possible value that an element of s can take is 1, and this value is attained when n = 1 and m = 1.
On the other hand, for any fixed value of m, as n increases, 1 - 1/n - 1/m increases, and approaches 1 - 1/m as n approaches infinity. This implies that the largest possible value that an element of s can take is 1 + 1/m, and this value is attained when n approaches infinity.
Therefore, we have:
inf(s) = 1
sup(s) = 1 + 1/m, where m is any positive integer.
To know more about infimum and supremum,
https://brainly.com/question/24424398
#SPJ11
In a camp there were stored food of 48 soldiers for 7 weeks. If 8 nore soldiers join the camp lets find for how many weeks it will be sifficient with the same food?
Answers
If there were enough food for 48 soldiers for 7 weeks, and 8 more soldiers join the camp, the same food will be sufficient for approximately 5.25 weeks.
To find out how long the same food will last for the increased number of soldiers, we can set up a proportion. The number of soldiers is directly proportional to the number of weeks the food will last.
Let's assume that x represents the number of weeks the food will last for the increased number of soldiers.
The proportion can be set up as:
48 soldiers / 7 weeks = (48 + 8) soldiers / x weeks
Cross-multiplying the proportion, we get:
48 * x = 55 * 7
Simplifying the equation, we have:
48x = 385
Dividing both sides of the equation by 48, we get:
x = 385 / 48 ≈ 8.02
Therefore, the same food will be sufficient for approximately 8.02 weeks. Since we cannot have a fraction of a week, we can round it to the nearest whole number. Thus, the food will be sufficient for approximately 8 weeks.
Learn more about proportion here:
https://brainly.com/question/31548894
#SPJ11
regarding the 98onfidence interval in question 1, what is the left boundary of the confidence interval?
Answers
The left boundary of the confidence interval in question 1 depends on the specific data and confidence level used to calculate it. In general, the left boundary represents the lower limit of the range of values within which we can be confident that the true population parameter falls. The confidence interval is calculated by taking the point estimate of the parameter, such as the sample mean or proportion, and adding and subtracting a margin of error based on the standard error and the desired level of confidence. The left boundary will be further from the point estimate than the right boundary and will decrease as the level of confidence increases.
A confidence interval is a range of values within which we can be reasonably confident that the true population parameter falls. The interval is calculated using a point estimate of the parameter, such as the sample mean or proportion, and a margin of error based on the standard error and desired level of confidence. The left boundary of the confidence interval represents the lower limit of this range of values and will be further from the point estimate than the right boundary.
In summary, the left boundary of the confidence interval depends on the specific data and confidence level used to calculate it. It represents the lower limit of the range of values within which we can be confident that the true population parameter falls. The left boundary will be further from the point estimate than the right boundary and will decrease as the level of confidence increases.
To know more about confidence interval visit:
https://brainly.com/question/29680703
#SPJ11
Is it possible for a matrix to have the vector (3, 1, 2) in its row space and (2, 1, l)^T in its null space? Explain. Let a _j be a nonzero column vector of an m times n matrix A. Is it possible for a_ j to be in N (A^T)? Explain.
Answers
No, it is not possible for a matrix to have the vector (3, 1, 2) in its row space and (2, 1, l)^T in its null space.
This is because the row space and null space of a matrix are orthogonal complements, meaning that any vector in the row space is perpendicular to any vector in the null space. If (3, 1, 2) is in the row space, it cannot also be in the null space. Similarly, if (2, 1, l)^T is in the null space of the matrix, it cannot also be in the row space.
For the second question, it is possible for a nonzero column vector a_j to be in N(A^T), the null space of the transpose of matrix A. This means that A^T * a_j = 0, or equivalently, a_j is orthogonal to all the rows of A. It is possible for a vector to be orthogonal to all the rows of a matrix without being in the row space, so a_j can be in N(A^T) without being in the row space of A.
learn more about matrix:https://brainly.com/question/94574
#SPJ11
A high value of the correlation coefficient r implies that a causal relationship exists between x and y.
Question 10 options:
True
False
Answers
The statement "A high value of the correlation coefficient r implies that a causal relationship exists between x and y" is False.
A high correlation coefficient (r) indicates a strong linear relationship between x and y, but it does not necessarily imply causation.
Correlation measures the strength and direction of a relationship between two variables, while causation implies that one variable directly affects the other. It is important to remember that correlation does not equal causation.
Thus, the given statement is False.
Learn more about "correlation ":
https://brainly.com/question/28175782
#SPJ11