"Scat singing" is a vocal improvisation technique where the singer uses nonsensical syllables or words rather than actual lyrics.
What is the comparison?One of the most well-known scat singers is Ella Fitzgerald, who used this technique in many of her songs throughout her career. In her 1974 performance of "Conversation in Scat," Ella demonstrates her mastery of the technique, seamlessly weaving together different scat sounds and syllables to create a unique and intricate vocal solo.
In contrast, a contemporary example of scat singing can be found in the song "Crazy" by Gnarls Barkley. The singer, CeeLo Green, uses scat singing during the chorus of the song, incorporating a variety of different scat sounds and syllables to create a unique and catchy vocal melody.
While both Ella Fitzgerald and CeeLo Green employ scat singing in their performances, the styles and techniques used are quite different, with Ella's scat singing being more traditional and rooted in the jazz tradition, and CeeLo's being more contemporary and pop-influenced.
Learn more about Ella Fitzgerald from
https://brainly.com/question/26574704
#SPJ1
The given SQL creates a Movie table with an auto-incrementing ID column. Write a single INSERT statement immediately after the CREATE TABLE statement that inserts the following movies:
Title Rating Release Date
Raiders of the Lost Ark PG June 15, 1981
The Godfather R March 24, 1972
The Pursuit of Happyness PG-13 December 15, 2006
Note that dates above need to be converted into YYYY-MM-DD format in the INSERT statement. Run your solution and verify the movies in the result table have the auto-assigned IDs 1, 2, and 3.
CREATE TABLE Movie (
ID INT AUTO_INCREMENT,
Title VARCHAR(100),
Rating CHAR(5) CHECK (Rating IN ('G', 'PG', 'PG-13', 'R')),
ReleaseDate DATE,
PRIMARY KEY (ID)
);
-- Write your INSERT statement here:
Answer:
INSERT INTO Movie(Title,Rating,ReleaseDate)
VALUES("Raiders of the Lost ArkPG",'PG',DATE '1981-06-15'),
("The Godfaher",'R',DATE '1972-03-24'),
("The Pursuit of Happyness",'PG-13',DATE '2006-12-15');
Explanation:
The SQL statement uses the "INSERT" clause to added data to the movie table. It uses the single insert statement to add multiple movies by separating the movies in a comma and their details in parenthesis.
Computers has done more harm than good
Explanation:
Teueeeeeeeeeeeeeeeeeee
Suppose you present a project and your supervisor comments that the graphics need to be a higher quality and suggests you replace a circuit board. To what circuit board is your supervisor referring?
graphics card
video card
sound card
system card
Answer:graphics card
Explanation:
Answer:
graphics card
Explanation:
What are the two choices for incorporating or removing changes when reviewing tracked changes made to a document?
Edit or Apply
Revise or Accept
Accept or Reject
Incorporate or Edit
Answer:
Accept or Reject
Explanation:
The only way to get tracked changes out of the documents is to accept or reject.
So, the correct option is - Accept or Reject
Answer:
C. Accept or reject
Explanation:
h. What is recycle bin?
->
Answer:
Trash application, the Recycle Bin
In order to enhance the training experience and emphasize the core security goals and mission, it is recommended that the executives _______________________.
Answer:
vg
Explanation:
kiopoggttyyjjfdvhi
A data science experiment you are conducting has retrieved two historical observations for the price of Bitcoin(BTC) on December 2, 2017 of 11234 and 12475. Create a Python script that stores these two historicalobservations in a list variable namedbtcdec1.
Answer:
In Python:
btcdec1 = []
btcdec1 = [11234, 12475]
print(btcdec1)
Explanation:
First, create an empty list named btcdec1
btcdec1 = []
Next, insert the two data (11234 and 12475) into the list
btcdec1 = [11234, 12475]
Lastly, print the list
print(btcdec1)
2. It is the art of creating computer graphics or images in art, print media, video games.
ins, televisions programs and commercials.
1 #include
2 using namespace std;
3
4 int main() {
5 int userNum;
6 int userNumSquared;
7
8 cin >> userNum;
9
10 userNumSquared = userNum + userNum; // Bug here; fix it
11
12 cout << userNumSquared; // Output formatting issue |
13
14 return 0;
15 }
16
While the zyLab platform can be used without training, a bit of training may help some students avoid common issues.
The assignment is to get an integer from input, and output that integer squared, ending with newline. (Note: This assignment is configured to have students programming directly in the zyBook. Instructors may instead require students to upload a file). Below is a program that's been nearly completed for you.
Click "Run program". The output is wrong. Sometimes a program lacking input will produce wrong output (as in this case), or no output. Remember to always pre-enter needed input.
Type 2 in the input box, then click "Run program", and note the output is 4.
Type 3 in the input box instead, run, and note the output is 6.
When students are done developing their program, they can submit the program for automated grading.
Click the "Submit mode" tab
Click "Submit for grading".
The first test case failed (as did all test cases, but focus on the first test case first). The highlighted arrow symbol means an ending newline was expected but is missing from your program's output.
Matching output exactly, even whitespace, is often required. Change the program to output an ending newline.
Click on "Develop mode", and change the output statement to output a newline: cout << userNumSquared << endl;. Type 2 in the input box and run.
Click on "Submit mode", click "Submit for grading", and observe that now the first test case passes and 1 point was earned.
The last two test cases failed, due to a bug, yielding only 1 of 3 possible points. Fix that bug.
Click on "Develop mode", change the program to use * rather than +, and try running with input 2 (output is 4) and 3 (output is now 9, not 6 as before).
Click on "Submit mode" again, and click "Submit for grading". Observe that all test cases are passed, and you've earned 3 of 3 points.
Answer:
Change line 10 to:
userNumSquared = userNum * userNum;
Change line 11 to:
cout << userNumSquared<<endl;
Explanation:
Though the question is a bit lengthy but the requirements are not clearly stated. However, I'm able to pick up the following points.
Print the square of the inputted numberPrint the squared number with a new lineTo do this, we simply modify the affected lines which are lines 10 and 11.
The plus sign on line 10 will be modified to multiplication
i.e.
userNumSquared = userNum * userNum;
And line 11 will be modified to:
cout << userNumSquared<<endl;
Every other line of the program is okay and do not need to be modified
what are the cleaning solutions used in cleaning gas stove, refrigerator and kitchen premises?
Answer:
Detergents. Soaps, liquid or paste. Solvent cleaners. Acid cleaners. Abrasive cleaners. Applying heat. Exposing to radiant energy. Chemical sanitizers. Natural cleaning materials.
Explanation:
what is ergonomic in computer science
Answer:
Ergonomics is the science of fitting jobs to people. One area of focus is on designing computer workstations and job tasks for safety and efficiency. Effective ergonomics design coupled with good posture can reduce employee injuries and increase job satisfaction and productivity.
A school has 100 lockers and 100 students. All lockers are closed on the first day of school. As the students enter, the first student, denoted S1, opens every locker. Then the second student, S2, begins with the second locker, denoted L2, and closes every other locker (i.e. every even numbered locker). Student S3 begins with the third locker and changes every third locker (closes it if it was open, and opens it if it was closed). Student S4 begins with locker L4 and changes every fourth locker. StudentS5 starts with L5 and changes every fifth locker, and so on, until student S100 changes L100.After all the students have passed through the building and changed the lockers, which lockers areopen? Write a program to find your answer.(Hint: Use an array of 100 boolean elements. each of which indicates whether a locker is open (true) or closed (false). Initially, all lockers are closed.)
Solution :
public class NewMain {
public_static void main_(String[] args) {
boolean[] _locker = new boolean_[101];
// to set all the locks to a false NOTE: first locker is the number 0. Last locker is the 99.
for (int_i=1;i<locker_length; i++)
{
locker[i] = false;
}
// first student opens all lockers.
for (int i=1;i<locker.length; i++) {
locker[i] = true;
}
for(int S=2; S<locker.length; S++)
{
for(int k=S; k<locker.length; k=k+S)
{
if(locker[k]==false) locker[k] = true;
else locker[k] = false;
}
}
for(int S=1; S<locker.length; S++)
{
if (locker[S] == true) {
System.out.println("Locker " + S + " Open");
}
/* else {
System.out.println("Locker " + S + " Close");
} */
}
}
}
What is one way to use proper netiquette when communicating online? Ask permission before posting private information. Post a message when you are angry Use CAPS when sending a message. Use unreliable sources.
Answer: A
Explanation:
Being a responsible netizen you must respect anyone using internet. Be mindful of what you share which include fake news, photos and video of others. Watch you're saying, if you wouldn't say something in real life dont say it online. You must think before you click not to hurt others.
Answer:
Ask permission before posting private information.
Explanation:
Just the most logical answer
Write your own printArray() function found in Processing for the Arduino. For simplicity, you can limit printArray() to integer arrays and you will also pass the size of the array to your function. For example, given the following code:
int terps[5] = {7, 9, 12, 1, 46};
void printArray(int arrayToPrint[], int arraySize) { // YOUR CODE HERE }
void setup()
{ // put your setup code here, to run once:
Serial.begin(9600);
}
void loop() {
// put your main code here, to run repeatedly:
printArray(terps,sizeof(terps)/sizeof(int)); delay(1000);
}
You should repeatedly see the following in the serial monitor:
[0]: 7
[1]: 9
[2]: 12
[3]: 1
[4]: 46
Answer:
Follows are the method definition to this question:
void printArray(int arrayToPrint[], int arraySize) //defining a method printArray that accepts two array in its parameters
{
for (int j = 0; j < arraySize; j++)//defining for loop print Serial numbers
{
Serial.print("[");//use print method to print square bracket
Serial.print(j);//use print method to print Serial numbers
Serial.print("]: ");//use print method to print square bracket
Serial.println(arrayToPrint[j]);//printing array value
}
}
Explanation:
In the above code, a method "printArray" is declared that holds two arrays "arrayToPrint and arraySize" as a parameter, and inside the method is used for loop to print the values.
In the loop, first, it uses the square bracket to print the serial number and in the last step, it prints array values.
Write a program that asks the user to enter a date in MM/DD/YYYY format that is typical for the US, the Philippines, Palau, Canada, and Micronesia. For the convenience of users from other nations, the program computes and displays this date in an alternative DD.MM.YYYY format. Sample run of your program would look like this: Please enter date in MM/DD/YYYY format: 7/4/1776 Here is the formatted date: 04.07.1776 You can assume that the user will enter correctly formatted date, but do not count on having 0s in front of one-digit dates. Hint: you will need to use string addition (concatenation) here.
Answer:
In Python:
txt = input("Date in MM/DD/YYYY format: ")
x = txt.split("/")
date=x[1]+"."
if(int(x[1])<10):
if not(x[1][0]=="0"):
date="0"+x[1]+"."
else:
date=x[1]+"."
if(int(x[0])<10):
if not(x[0][0]=="0"):
date+="0"+x[0]+"."+x[2]
else:
date+=x[0]+"."+x[2]
else:
date+=x[0]+"."+x[2]
print(date)
Explanation:
From the question, we understand that the input is in MM/DD/YYYY format and the output is in DD/MM/YYYY format/
The program explanation is as follows:
This prompts the user for date in MM/DD/YYYY format
txt = input("Date in MM/DD/YYYY format: ")
This splits the texts into units (MM, DD and YYYY)
x = txt.split("/")
This calculates the DD of the output
date=x[1]+"."
This checks if the DD is less than 10 (i..e 1 or 01 to 9 or 09)
if(int(x[1])<10):
If true, this checks if the first digit of DD is not 0.
if not(x[1][0]=="0"):
If true, the prefix 0 is added to DD
date="0"+x[1]+"."
else:
If otherwise, no 0 is added to DD
date=x[1]+"."
This checks if the MM is less than 10 (i..e 1 or 01 to 9 or 09)
if(int(x[0])<10):
If true, this checks if the first digit of MM is not 0.
if not(x[0][0]=="0"):
If true, the prefix 0 is added to MM and the full date is generated
date+="0"+x[0]+"."+x[2]
else:
If otherwise, no 0 is added to MM and the full date is generated
date+=x[0]+"."+x[2]
else:
If MM is greater than 10, no operation is carried out before the date is generated
date+=x[0]+"."+x[2]
This prints the new date
print(date)
A customer comes into a computer parts and service store. The customer is looking for a device to provide secure access to the central server room using a retinal scan. What device should the store owner recommend to accomplish the required task?
Answer:
The owner should recommend facial ID or retinal scanner
In comparison to other biometric methods like fingerprint or retinal scans, it is quicker and more practical. Comparing facial recognition to typing passwords or PINs, there are also fewer touchpoints. Multifactor authentication is supported for a second layer of security check.
What secure access to central server room, a retinal scan?The topic of facial recognition has always caused controversy. The technology, according to its proponents, is a useful tool for apprehending criminals and confirming our identities. Critics argue that it violates privacy, may be inaccurate and racially prejudiced, and may even lead to unjustified arrests.
Simpleness of use and implementation. Once put into practice, both approaches are simple to utilize. However, facial recognition is basically possible with any camera (although a higher quality camera will be more accurate). Iris scanning is impossible with a standard camera, and the technology can be very expensive.
Therefore, The owner should recommend facial ID or retinal scanner.
Learn more about scan here:
https://brainly.com/question/24319849
#SPJ2
You are working with an online tech service to fix a problem with installation of a program on your machine. You grant them remote access to your computer to enable them to act as you to fix situation. What type of must be installed on your machine to allow this type of action by another person
Answer:
Single User OS.
Explanation:
An operating system is a system software pre-installed on a computing device to manage or control software application, computer hardware and user processes.
This ultimately implies that, an operating system acts as an interface or intermediary between the computer end user and the hardware portion of the computer system (computer hardware) in the processing and execution of instructions.
Some examples of an operating system on computers are QNX, Linux, OpenVMS, MacOS, Microsoft windows, IBM, Solaris, VM etc.
There are different types of operating systems (OS) used for specific purposes and these are;
1. Batch Operating System.
2. Multitasking/Time Sharing OS.
3. Multiprocessing OS.
4. Network OS.
5. Mobile OS.
6. Real Time OS .
7. Distributed OS.
8. Single User OS.
A Single User OS is a type of operating system that only allows one user to perform a task or use a system at any time.
In this scenario, you are working with an online tech service to fix a problem with installation of a program on your machine. You grant them remote access to your computer to enable them to act as you to fix situation. Therefore, the type of OS which must be installed on your machine to allow this type of action by another person is called a Single User OS.
Binary is a base-2 number system instead of the decimal (base-10) system we are familiar with. Write a recursive function PrintInBinary(int num) that prints the binary representation for a given integer. For example, calling PrintInBinary(5) would print 101. Your function may assume the integer parameter is non-negative. The recursive insight for this problem is to realize you can identify the least significant binary digit by using the modulus operator with value 2. For example, given the integer 35, mod by 2 tells you that the last binary digit must be 1 (i.e. this number is odd), and division by 2 gives you the remaining portion of the integer (17). What 's the right way to handle the remaining portion
Answer:
In C++:
int PrintInBinary(int num){
if (num == 0)
return 0;
else
return (num % 2 + 10 * PrintInBinary(num / 2));
}
Explanation:
This defines the PrintInBinary function
int PrintInBinary(int num){
This returns 0 is num is 0 or num has been reduced to 0
if (num == 0)
return 0;
If otherwise, see below for further explanation
else
return (num % 2 + 10 * PrintInBinary(num / 2));
}
----------------------------------------------------------------------------------------
num % 2 + 10 * PrintInBinary(num / 2)
The above can be split into:
num % 2 and + 10 * PrintInBinary(num / 2)
Assume num is 35.
num % 2 = 1
10 * PrintInBinary(num / 2) => 10 * PrintInBinary(17)
17 will be passed to the function (recursively).
This process will continue until num is 0
Practice Question
What will be displayed after this
code segment is run?
count
0
REPEAT UNTIL (count = 3
count count + 1
DISPLAY
and"
DISPLAY count
"1 and 2 and 3"
"And 1 and 2 and 3"
"0 and 1 and 2"
"And 0 and 1 and 2"
Answer:
Follows are the code to the given question:
#include <stdio.h>//header file
int main()//main method
{
int count=0;//defining an integer variable
for(count=0;count<3;count++)//use for loop to count values
{
printf("%d\n",count);//print count values
}
return 0;
}
Output:
0
1
2
Explanation:
In this code, it declares the integer variable "count" which has a value of "0" and in the next step declares a loop, using the count variable to regulate count values, which is less than 3, and increases the count value, and prints its values. This variable is the count value.
The count variable holds a value of 0, and use a for loop that checks its value is less than 3, and print its value, that's why it will print the value that is 0,1, and 2.
3. Given the following total revenue functions, find the corresponding demand functions:
a) TR = 50Q-4Q²
b) TR = 10
a)TR=50Q4Q2 I hope.this helps
A) The demand function for the total revenue function TR = 50Q - 4Q² is;
P = 50 - 4Q
B) The demand function for the total revenue function TR = 10 is; 10/Q
We are given total revenue functions as;
TR = 50Q - 4Q²
TR = 10
A) TR = 50Q - 4Q²
Formula for revenue function if Q represents the units demanded is;
TR = P × Q
Where P is the demand function
Thus;
50Q - 4Q² = PQ
Divide both sides by Q to get the demand function;
P = 50 - 4Q
B) TR = 10
Formula for revenue function if Q represents the units demanded is;
TR = P × Q
Where P is the demand function
Thus;
10 = P × Q
Divide both sides by Q to get the demand function;
P = 10/Q
Read more at;https://brainly.com/question/13701068
A local real estate company can have its 25 computers upgraded for $1000. If the company chooses only to upgrade 10 systems, how much will the upgrade cost if the same rate is used?
Answer:
it is
Explanation:
400 dollars for 10 systems and 200 dollars for 5 systems
explanation
first
find the price of 1 system or computer which is done by dividing 1000 by 25
25)1000(40
100
____
00
00
__
0
then multiple it by 10 =40 ×10=$400
Answer:
400!!
Explanation:
State and give reason, if the following variables are valid/invalid:
Variables defined in Python
Valid/Invalid
Reason
daysInYear
4numberFiles
Combination-month_game
Suncity.school sec54
Answer:
See Explanation
Explanation:
Variable: daysInYear
Valid/Invalid: Valid
Reason: It begins with a letter; it is not a keyword, and it does not contain a hyphen
Variable: 4numberFiles
Valid/Invalid: Invalid
Reason: It begins with a number
Variable: Combination-month_game
Valid/Invalid: Invalid
Reason: It contains a hyphen
Variable: Suncity.school sec54
Valid/Invalid: Invalid
Reason: It contains a dot and it contains space
What is Software Packages
[tex]{\fcolorbox{red}{black}{\white {Answer}}}[/tex]
A software package is an assemblage of files and information about those files. ... Each package includes an archive of files and information about the software, such as its name, the specific version and a description. A package management system (PMS), such as rpm or YUM, automates the installation process.
Can someone tell me how to get rid of the the orange with blue and orange on the status bar
Please and thank you
Picture above
Answer:
Explanation:
i'm not sure how tho
You are given the following segment of code:Line 1: PROCEDURE printScorePairs()Line 2: {Line 3: count <-- 0Line 4: sum <-- 0Line 5: i <-- 1Line 6: scores <-- [73, 85, 100, 90, 64, 55]Line 7: REPEAT UNTIL ( i > LENGTH (scores) )Line 8: {Line 9: sum <-- scores[i] scores[i 1]Line 10: DISPLAY ( sum )Line 11: i <-- i 2Line 12: }Line 13: }The ABC company is thrifty when it comes to purchasing memory (also known as RAM) for its computers. Therefore, memory is of the utmost importance and all programming code needs to be optimized to use the least amount of memory possible. What modifications could be made to reduce the memory requirements without changing the overall functionality of the code?
Answer:
Move Line 10 to after line 12
Explanation:
Required: Modify the program
From the procedure above, the procedure prints the sum at each loop. Unless it is really necessary, or it is needed to test the program, it is not a good practice.
To optimize the program, simply remove the line at displays the sum (i.e. line 10) and place it at the end of the loop.
So, the end of the procedure looks like:
Line 10: i <-- i 2
Line 11: }
Line 12: DISPLAY ( sum )
Line 13:
To copy an item, you would:
O Highlight the item, right click, and select copy
O Press Ctrl + X
O Press Ctrl + Z
O Highlight text
Are items a through e in the following list algorithm? If not, what qualities required of algorithms do they lack?
a. Add the first row of the following matrix to another row whose first column contains a nonzero entry. (Reminder: Columns run vertically; rows run horizontally.)
[1 2 0 4 0 3 2 4 2 3 10 22 12 4 3 4]
b. In order to show that there are as many prime numbers as there are natural numbers, match each prime number with a natural number in matching the first prime number with 1 (which is the first natural number) and the second prime number with 2, the third with 3, and so forth. If, in the end, it turns out that each prime number can be paired with each natural number, then it is shown that there are as many prime numbers as natural numbers.
c. Suppose you're given two vectors each with 20 elements and asked to perform the following operation. Take the first element of the first vector and multiply it by the first clement of the second vector. Do the same to the second elements, and so forth. Add all the individual products together to derive the dot product.
d. Lynne and Calvin are trying to decided who will take the dog for a walk. Lynne suggests that they flip a coin and pulls a quarter out of her pocket. Calvin does not trust Lynne and suspects that the quarter may be weighted (meaning that it might favor a particular outcome when tossed) and suggests the following procedure to fairly determine who will walk the dog.
1. Flip the quarter twice.
2. If the outcome is heads on the first flip and tails on the second, then I will walk the dog.
3. If the outcome is tails on the first flip, and heads on the second, then you will walk the dog.
Answer:
Following are the responses to the given points:
Explanation:
The following features must contain a well-specified algorithm:
Description [tex]\to[/tex] Exact measures described
Effective computation [tex]\to[/tex] contains steps that a computer may perform
finitude [tex]\to[/tex] It must finish algorithm.
In choice "a", there is little algorithm Because it does not stop, finiteness has already been incomplete. There is also no algorithm.
In choice "b", it needs productivity and computational burden. because it's not Enter whatever the end would be.
In choice "c", the algorithm is given the procedure. It fulfills all 3 algorithmic properties.
In choice "d", each algorithm is a defined process. Since it needs finitude.
algorithm and flowchart of detect whether entered number is positive, negative or zero
Explain different types of networking-based attacks
Answer:
Network-based cyber attacks. ... These may be active attacks, wherein the hacker manipulates network activity in real-time; or passive attacks, wherein the attacker sees network activity but does not attempt to modify it
which internet service is the main reason the internet has expanded and what draws newcomers to the internet?
Answer:
It has spread throughout the world since it is a very useful tool since most things are facilitated, thus leading to a much more efficient daily life, which is why the internet is one of the main means for the functioning of the world today. day, as new technologies have revolutionized
Social media.
The term social media refers to those digital tools that facilitate the transmission of information, communication and social interaction between individuals. Thus, social media allows individuals to relate to each other, in a similar way as if they were physically interacting, but through computer means.
These social media can be from profiles on social networks to blogs, podcasts or even videos on digital platforms. In short, nowadays social media is an integral part of people's social life, and it is in many cases what ends up driving them to use the internet.
Learn more in https://brainly.com/question/21765376