The increased amount of [tex]CoCl_2[/tex] solution, increasing the concentration of [tex]CoCl_2[/tex]. This resulted in the equilibrium shifting in the forward direction due to Le Chatelier's Principle.
The reaction can be written as follows : [tex]CoCl_2[/tex] (aq) ⇌ [tex]Co^2+ (aq) + 2Cl^- (aq)[/tex]
When saturated NaCl was added, the concentration of chloride ions in the solution increased, and the reaction shifted to the right. This is because the reaction will shift to the right in the direction that will reduce the concentration of [tex]Cl^-[/tex] ions, and since NaCl is a source of Cl^-[tex]Cl^-[/tex] ions, the equilibrium shifts to the right.Learn more about equilibrium shifts: https://brainly.in/question/40922197
#SPJ11
what is the electrostatic potential energy (in joules) between an electron and a proton that are separated by 53pm
The electrostatic potential energy between an electron and a proton that are separated by 53pm is 4.27 × 10^-18 J.
Calculation of electrostatic potential energy?The electrostatic potential energy between two charged particles can be calculated using the
formula U = k*q1*q2/r,
where:
k is the Coulomb constant,
q1 and q2 are the charges of the two particles, and
r is the distance between them.
In this case, we have q1 = -1.60*10^-19 C (charge of the electron), q2 = 1.60*10^-19 C (charge of the proton), and r = 53 pm = 5.3*10^-10 m. Plugging these values into the formula, we get:
U = (8.99*10^9 N m2/C2)*(-1.60*10^-19 C)*(1.60*10^-19 C)/(5.3*10^-10 m)
U = 4.27 × 10^-18 J
Learn more about electrostatic potential energy here:
https://brainly.com/question/26978411
#SPJ1
b) which compound, a or b, was the limiting reagent in this reaction? compound b c) consider the lane that shows the reaction mixture. are the starting materials more or less polar than the reaction product? more polar
As per the information provided in the question, the compound that is the limiting reagent is "B". And the starting materials were "more polar" than the reaction product.
The limiting reagent is the one that gets consumed completely in the reaction. The other reactant is left behind in excess. The reaction's speed is determined by the amount of the limiting reagent present. In the given reaction, compound B is the limiting reagent. We can prove this by comparing the number of moles of compounds A and B. We can see that compound B has fewer moles. Therefore, it is the limiting reagent. 2 moles of compound A react with 1 mole of compound B. We have 2 moles of A and 1 mole of B in this reaction mixture. Hence, compound B is the limiting reagent. Starting materials are more polar than the reaction product. When a chemical reaction occurs, the reactants combine to form a new compound or product. The product's properties are often different from those of the starting materials. In this reaction, the starting materials are more polar than the reaction product. This can be seen by observing the reaction mixture's lane. We can see that the reaction product has moved ahead of the starting materials on the chromatogram. The starting materials are more polar than the reaction product.
For more information regarding this topic, you can click the below link
https://brainly.com/question/26905271
#SPJ11
3. Which statement best describes chemical bonding?
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Answer:
a. The gluing together of any two atoms that don't have full outer shells.
b. The separation of electrons from the main atom.
c. The joining of atoms by a shared interested of valence electrons which ends up
creating new substances.
d. The melting of substances to form new solids.
Explanation:
a. The gluing together of any two atoms that don't have full outer shells refers to chemical bonding, which can occur through different mechanisms such as covalent bonding, ionic bonding, and metallic bonding.
b. The separation of electrons from the main atom refers to ionization, where an atom or molecule loses or gains one or more electrons and becomes charged.
c. The joining of atoms by a shared interest of valence electrons which ends up creating new substances refers to covalent bonding, where atoms share electrons to form a stable molecule.
d. The melting of substances to form new solids does not necessarily create new substances; it is a physical change where a solid is transformed into a liquid due to an increase in temperature. Upon cooling, the liquid may solidify again, either forming the original substance or a different solid phase.
explain why the optimum ratio that you found through the loudness test was the best ratio of oxygen to hydrogen
Answer:
The optimum ratio found through the loudness test represents the ratio of oxygen to hydrogen where the most efficient combustion occurs. When hydrogen and oxygen combine in the correct ratio, a chemical reaction occurs that produces a loud "pop" sound and releases energy in the form of heat and light.
The balanced chemical equation for the reaction between hydrogen and oxygen is:
2H2 + O2 -> 2H2O
This equation shows that two molecules of hydrogen react with one molecule of oxygen to produce two molecules of water. If there is not enough oxygen present, the reaction will be incomplete and unreacted hydrogen will remain. If there is too much oxygen present, the excess oxygen will not react and will simply be wasted.
Therefore, the optimum ratio of oxygen to hydrogen is the ratio where all of the hydrogen is completely reacted with the oxygen, and no excess oxygen is present. This ensures the most efficient combustion and the maximum release of energy in the form of heat and light.
determine whether each observation generally corresponds to a physical change or a chemical change. a liquid freezes into a solid. choose... a solution heats up upon mixing with another. choose... a solid dissolves into water. choose... the color of a substance changes over time. choose... bubbles are produced upon mixing two solutions. choose... a precipitate is formed from two solutions. choose...
The observation which corresponds to physical change are a liquid freezes into a solid and a solid dissolves into water.
The observation which corresponds to chemical change are a solution heats up upon mixing with another, the color of a substance changes over time, bubbles are produced upon mixing two solutions, and a precipitate is formed from two solutions.
When it comes to determining whether each observation corresponds to a physical change or a chemical change:
1. A liquid freezes into a solid corresponds to a physical change.
The explanation for this is that physical changes occur when the form of the substance alters, but the chemical composition of the substance stays the same. Because the liquid's chemical composition does not alter during the process of freezing, it is classified as a physical alteration.
2. A solution heats up upon mixing with another corresponds to a chemical change.
A chemical change is one in which the composition of the substance changes. This is most commonly accomplished through a chemical reaction, which is when the original molecules are transformed into new molecules. In this instance, when two solutions are combined and heat is generated, a chemical reaction is occurring.
3. A solid dissolves into water corresponds to a physical change.
The explanation for this is that the process of dissolving a solid into water does not alter the chemical composition of the solid. Instead, the solid's particles are separated by the water particles, resulting in a homogenous solution. Because the chemical composition remains constant, it is classified as a physical change.
4. The color of a substance changes over time corresponds to a chemical change.
This alteration is often linked to a chemical reaction. When a substance's color changes over time, it is frequently due to the presence of a different substance. As a result, the chemical composition of the original substance is altered. As a result, it is classified as a chemical alteration.
5. Bubbles are produced upon mixing two solutions corresponds to a chemical change.
This alteration is often linked to a chemical reaction. When two substances combine and produce bubbles, it is usually the result of the generation of a new gas. As a result, the original molecules have transformed, resulting in a new substance. As a result, it is classified as a chemical alteration.
6. A precipitate is formed from two solutions corresponds to a chemical change.
When two solutions are combined, they frequently react to form a precipitate. This indicates that a new substance has been produced, and the original substance's composition has been altered. As a result, it is classified as a chemical alteration.
Learn more about Chemical change:
https://brainly.com/question/11370755
#SPJ11
nonenzymatic e1 reactions can often result in a mixture of more than one alkene product. elimination of 'hx' from the following starting compound, for example, could yield three different possible alkene products, true or false?
The given statement is true that nonenzymatic E1 reactions can often result in a mixture of more than one alkene product. This is due to the presence of different possible elimination products.
Nonenzymatic E1 reactions: E1 is a chemical reaction mechanism that includes the elimination of a leaving group (such as HX) from an organic molecule to create a double bond or alkene. This is a two-step process in which the first step is the formation of a carbocation intermediate.The nonenzymatic E1 reactions can often result in a mixture of more than one alkene product because the carbocation intermediate that forms can be attacked by nucleophiles in various directions, leading to the formation of different elimination products. The regiochemistry of the reaction is determined by the most stable carbocation intermediate formed from the initial step of the reaction.In this case, elimination of HX from the given starting compound can yield three different possible alkene products due to the presence of three different hydrogen atoms that can eliminate. Hence, the given statement is true.Learn more about E1 reactions: https://brainly.com/question/30887510
#SPJ11
which solution has the highest boiling point at standard pressure? (1) 0.10 m mgcl2(aq) (2) 0.10 m mgso4(aq)
The solution with the highest boiling point at standard pressure is the one with the highest concentration of solutes, which increases the boiling point of the solution. In this instance, the answer is 0.10 M MgCl2(aq).
What is boiling point and standard pressure?
Boiling point: The boiling point of a solution is the temperature at which the vapour pressure of the solution equals the external pressure, allowing the solution to boil.
Standard pressure: One atmosphere of pressure is defined as the standard pressure.
A solution has the highest boiling point at standard pressure (1 atm) when it has the greatest concentration of solutes (molarity).
Which solution has the highest boiling point at standard pressure?
MgCl2 will have the greatest boiling point at a normal pressure since it has the most solute concentration.
The boiling point of a liquid is raised when solutes are added to it because the vapour pressure of the solution is lowered, thus more energy is required to break the intermolecular forces between the solvent and solute particles.
The boiling point of the solution rises as more solute is dissolved in the solvent, and the solvent-solute intermolecular forces become stronger, thus increasing the boiling point.
As a result, the 0.10 M MgCl2(aq) solution has the greatest boiling point among the options given.
for more information about boiling point at standard pressure refer here:
https://brainly.com/question/238983?
#SPJ11
What is the theoretical yield of Fe (molar mass = 55. 85 g/mol) if 2. 00 mol of Fe2O3 is reacted with 4. 00 mol of C according to the balanced equation: Fe2O3(s) + 3 C(s) + 2 Fe(s) + 3 CO(g)
In this process, 149 g of Fe should theoretically be produced.
The balanced chemical equation shows that one mole of Fe2O3 reacts with three moles of C to produce two moles of Fe and three moles of CO. Therefore, the mole ratio of Fe2O3 to Fe is 1:1.
Using the given information, we know that 2.00 mol of Fe2O3 is reacted with 4.00 mol of C. We can determine the limiting reactant by comparing the mole ratios of Fe2O3 and C required for the reaction. Since Fe2O3 and C have a mole ratio of 1:3 in the balanced equation, we can see that only 1.33 mol of C (4.00 mol/3) is required to react with 2.00 mol of Fe2O3. Therefore, C is the limiting reactant.
To determine the theoretical yield of Fe, we need to first calculate the amount of Fe that can be produced from 4.00 mol of C. Using the mole ratio of Fe to C in the balanced equation, we can see that 4.00 mol of C can produce:
2 mol Fe / 3 mol C x 4.00 mol C = 2.67 mol Fe
Finally, we can calculate the theoretical yield of Fe by multiplying the amount of Fe that can be produced (2.67 mol) by its molar mass (55.85 g/mol):
Theoretical yield of Fe = 2.67 mol x 55.85 g/mol = 149 g
Therefore, the theoretical yield of Fe in this reaction is 149 g.
To learn more about balanced equation refer to:
brainly.com/question/30313275
#SPJ4
Complete these Brønsted–Lowry reactions.
The reaction can be solved as reaction 1 :-HPO²¯ + H+ − H₂ + PO²¯ reaction 2: -HPO²¯ +OH¯ ⇒ H₂O + PO²¯
What is Brønsted–Lowry reactions. ?
Brønsted–Lowry reactions are a type of acid-base reaction in which an acid donates a proton (H+) to a base, which then accepts the proton. The Brønsted–Lowry theory defines an acid as a species that donates a proton, while a base is a species that accepts a proton.
In a Brønsted–Lowry acid-base reaction, the acid and base always exist in a conjugate acid-base pair, which are related to each other by the transfer of a proton. For example, in the reaction:
HA + B- → A- + HB
HA is the acid and donates a proton to B-, which is the base. The product A- is the conjugate base of the acid HA, and the product HB is the conjugate acid of the base B-.
Brønsted–Lowry reactions are an important concept in chemistry and are used to explain many types of reactions, including acid-base titrations, buffer solutions, and chemical equilibria.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ1
what is the iupac name for the following? the line-angle structure has five carbon atoms in the chain, with a cl atom attached to the third (from left to right) carbon.
The IUPAC name for the line-angle structure with five carbon atoms in the chain and a Cl atom attached to the third (from left to right) carbon is 3-chloropentane.
The IUPAC naming system for organic compounds involves several steps, but some general principles must be followed.
The longest carbon chain is counted first, and the substituents are identified based on their position in the chain.
In the given structure, the longest chain contains five carbon atoms. The third carbon atom has a chlorine atom attached to it, making it a substituent.
The name of the substituent is added to the chain name as a prefix, thus giving the final name 3-chloropentane.
The IUPAC name of the given compound is 3-chloropentane. The common name for this structure is Chloroamyl.
Learn more about the IUPAC naming system here:
https://brainly.com/question/28872356
#SPJ11
g a 1.00 liter solution contains 0.28 m nitrous acid and 0.36 m potassium nitrite. if 0.090 moles of calcium hydroxide are added to this system, indicate whether the following statements are true or false. (assume that the volume does not change upon the addition of calcium hydroxide.)_______TrueFalse A. The number of moles of HNO2 will decrease._______TrueFalse B. The number of moles of NO2- will remain the same._______TrueFalse C. The equilibrium concentration of H3O+ will increase._______TrueFalse D. The pH will increase._______TrueFalse E. The ratio of [HNO2] / [NO2-] will increase.
Comparing the calculated value of Ca(OH)2 required with the actual amount of Ca(OH)2 added. Ca(OH)2 added = 0.090 mol/L.∴ Ca(OH)2 added < Ca(OH)2 requires Ca(OH)2 added < Ca(OH)2 required, all of the Ca(OH)2 will be consumed. Therefore, the number of moles of HNO2 will decrease, which makes statement A true. So, statement A is True.
The reaction's balanced equation shows that 2 moles of HNO2 react with 1 mole of Ca(OH)2. This implies that the amount of NO2- in the solution remains the same because the reaction does not include NO2-.Therefore, the number of moles of NO2- will remain the same, which makes statement B false. So, statement B is False.
Using Le Chatelier's principle, we can see that adding Ca(OH)2 to a solution of HNO2 and KNO2 will raise the pH by decreasing the concentration of H+. Hence, the equilibrium concentration of H3O+ will increase. So, statement C is True. Therefore, statement C is True.
The pH of the solution increases as the concentration of OH- increases. Adding Ca(OH)2 to a solution of HNO2 and KNO2 increases the concentration of OH-. Therefore, the pH will increase, making statement D True. Therefore, statement D is True.
The ratio of [HNO2] / [NO2-] will not increase. The number of moles of NO2- remains the same as no NO2- is involved in the reaction with Ca(OH)2. As the number of moles of HNO2 decreases, the ratio [HNO2]/[NO2-] decreases, making statement E false. Therefore, statement E is False.
To know more about Le Chatelier's principle:
https://brainly.com/question/29009512
#SPJ11
what family of elements is relatively unreactive and why
The family of elements that is relatively unreactive is the noble gases, also known as Group 18 or the inert gases.
This group includes helium, neon, argon, krypton, xenon, and radon. Noble gases are unreactive because their outermost electron shells are completely filled with electrons, making them stable and resistant to gaining or losing electrons to form chemical bonds with other atoms. This electronic configuration makes noble gases extremely stable and non-reactive under normal conditions. This also means that noble gases have very low electronegativity and ionization energy, making it difficult for them to form chemical bonds with other elements.
To know more about noble gases, here
brainly.com/question/10653147
#SPJ4
If a solution had a pOH of 7. 39 then it has a pOH of?
The relationship between pH, pOH, and the concentration of hydroxide ions in a solution is given by:
pH + pOH = 14
If a solution has a pOH of 7.39, we can find its pH by subtracting the pOH from 14:
pH = 14 - pOH
pH = 14 - 7.39
pH = 6.61
Therefore, the solution has a pH of 6.61.
The pH scale, which describes the connection between pH, pOH, and the quantity of hydroxide ions, is an essential concept in chemistry. A pH of 7 is regarded as neutral, whereas values below 7 are acidic and those over 7 are basic (also called alkaline).
learn more about , pOH here:
https://brainly.com/question/480457
#SPJ4
A chemist heats the block of gold as shown in the interactive, then places the metal sample in a cup of oil at 25.00 °C instead of
a cup of water. The temperature of the oil increases to 26.52 °C. Calculate the mass of oil in the cup. The specific heat of gold is
0.129 J/g °C and the specific heat of oil is 1.74 J/g °C.
moil =
$
4
d
%
5
<
6
MacBook Air
FG
&
7
3
F7
00 *
8
DII
FB
9
DD
F9
O
4
F10
4
F11
+ 11
Do
8
√3)
F12
which of the following relationships correctly express the clausius-clapeyron equation, which relates vapor pressure to temperature? select all that apply. multiple select question. a) ln p=-delta Hvap/R (1/T) +C
B) ln p=-delta Hvap/R (T2-T1)
C) ln p=-delta Hvap/nR T (1/T) +C
D) ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E) ln P2/P1=-delta Hvap/R (1/T2-1/T1)
The Clausius-Clapeyron equation relates vapor pressure to temperature and the correct relationships are A, D, and E.
A: ln p=-delta Hvap/R (1/T) +C
D: ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E: ln P2/P1=-delta Hvap/R (1/T2-1/T1)
Explanation:
The Clausius-Clapeyron equation relates vapour pressure to temperature. The relationships that correctly express the Clausius-Clapeyron equation are:A) ln p = -ΔHvap/R(1/T) + C (This equation shows that the natural log of the vapor pressure is inversely proportional to the temperature.)D) ln P1/P2 = -ΔHvap/R (1/T2 - 1/T1) (This equation shows that the natural log of the ratio of two vapor pressures is proportional to the reciprocal of temperature difference.)E) ln P2/P1 = -ΔHvap/R (1/T2 - 1/T1) (This equation is the same as equation D but the order of the pressure ratio is reversed.)Therefore, options A, D, and E correctly express the Clausius-Clapeyron equation which relates vapor pressure to temperature.
For more such questions on Clausius Clapeyron
https://brainly.com/question/24073811
#SPJ11
The equation for the fermentation of glucose to alcohol and carbon dioxide is C6H12O6(aq) → 2C2H5OH(aq) + 2CO2(g) The enthalpy change for the reaction is −67 kJ. Is the reaction exothermic or endothermic? Is energy, in the form of heat, absorbed or evolved as the reaction occurs?
In the reaction of glucose converting to ethanol we can say energy, in the form of heat, is evolved as the reaction occurs. It is an exothermic reaction.
What is exothermic reaction?
An exothermic reaction is a reaction in which energy is released in the form of light or heat. Thus in an exothermic reaction, energy is transferred into the surroundings rather than taking energy from the surroundings as in an endothermic reaction. In an exothermic reaction, the change in enthalpy ( ΔH) will be negative.
The enthalpy change for the reaction is −67 kJ, which means that 67 kJ of energy is released during the reaction. This indicates that the reaction is exothermic since it releases heat.
Exothermic reactions release energy in the form of heat as the reaction occurs. In this case, the energy released during the fermentation of glucose to alcohol and carbon dioxide is in the form of heat. The heat released can be measured experimentally and is equal to the enthalpy change of the reaction. Therefore, we can say that energy, in the form of heat, is evolved as the reaction occurs.
Learn more about exothermic reaction on:
https://brainly.in/question/19363174
#SPJ11
how to capturing unknown substrates via in situ formation of tightly bound bisubstrate adducts: s-adenosyl-vinthionine as a functional probe for adomet-dependent methyltransferases?
In situ formation of tightly bound bisubstrate adducts can be used to capture unknown substrates. S-adenosyl-vinthionine can be used as a functional probe for AdoMet-dependent methyltransferases. This is the answer to how to capturing unknown substrates via in situ formation of tightly bound bisubstrate adducts: s-adenosyl-vinthionine as a functional probe for AdoMet-dependent methyltransferases.
Methyltransferases play an important role in the regulation of gene expression and protein function. AdoMet-dependent methyltransferases use S-adenosylmethionine (AdoMet) as a substrate to transfer methyl groups to various targets.
In order to identify unknown substrates of AdoMet-dependent methyltransferases, researchers can use S-adenosyl-vinthionine as a functional probe. S-adenosyl-vinthionine is a structural analogue of AdoMet that can form a tightly bound bisubstrate adduct.
Know more about methyltransferases here:
https://brainly.com/question/15304741
#SPJ11
Write the chemical equation for the ionization of water. ionization of water:
The ions are produced by the water self-ionization reaction, which applies to pure water and any aqueous solution: H2O + H2O ⇌ H3O+ + OH.
For the precipitation reaction occurring between iron (II) chloride, FeCl2 and potassium carbonate K2CO3, show the Molecular, Complete Ionic and Net Ionic Equations
If you take 20 g FeCl2 and 25 g K2CO3, what will be the theoretical yield of the solid product? This calculation depends on the limiting agent.
The theoretical yield of the solid product FeCO₃ in the reaction here is 18.18 grams. This is because, FeCl₂ is a limiting agent.
What is the theoretical yield?The precipitation reaction occurring between iron (II) chloride, FeCl₂ and potassium carbonate K₂CO₃
The Molecular equation is given below: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl
The Complete Ionic equation is given below: Fe₂⁺ + 2Cl⁻ + 2K⁺ + CO₃²⁻ → FeCO₃ + 2K⁺ + 2Cl⁻
The Net Ionic equation is given below: Fe²⁺ + CO₃²⁻→ FeCO₃
Molar mass of FeCl₂ = 126.75 g/mol
Molar mass of K₂CO₃ = 138.21 g/mol
n(FeCl₂) = mass/Mr = 20/126.75 = 0.1578 m
n(K₂CO₃) = mass/Mr = 25/138.21 = 0.1808 m
Therefore, FeCl₂ is the limiting agent. The theoretical yield of FeCO₃ can be calculated as follows: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl
1 mole of FeCl₂ produces 1 mole of FeCO₃
Moles of FeCO₃ produced = 0.1578 mol
FeCO₃ molar mass = 115.86 g/mol
Mass of FeCO₃ produced = 0.1578 mol × 115.86 g/mol = 18.18 g
Thus, the theoretical yield of the solid product FeCO₃ is 18.18 g.
Learn more about Theoretical yield here:
https://brainly.com/question/14966377
#SPJ11
Can you tell which one of the four examples corresponds to the making of a hydrocarbon
fuel from CO2 and water?
A hopeful method for lowering greenhouse gas emissions and creating sustainable energy sources is the process of converting CO2 and water into a hydrocarbon fuel.
The process of making a hydrocarbon fuel from CO2 and water is called "artificial photosynthesis," and it involves using renewable energy sources to convert carbon dioxide and water into a liquid hydrocarbon fuel. This process is similar to photosynthesis in plants, where sunlight is used to convert carbon dioxide and water into glucose and oxygen.
Out of the four examples provided, it is not clear which one corresponds to the making of a hydrocarbon fuel from CO2 and water. However, one possible process involves using solar energy to drive the reaction between carbon dioxide and water, which results in the formation of a liquid hydrocarbon fuel. This process involves capturing carbon dioxide from the air or from industrial processes and combining it with water in the presence of a catalyst to produce a liquid hydrocarbon fuel.
Overall, the process of making a hydrocarbon fuel from CO2 and water is a promising approach to reducing greenhouse gas emissions and producing sustainable energy sources.
To learn more about hydrocarbon refer to:
brainly.com/question/17578846
#SPJ4
Which of these substances speeds up the absorption of alcohol?-plain water-starchy foods-carbonated water-meat products
The correct answer is that none of the substances listed actually speeds up the absorption of alcohol.
As the rate of alcohol absorption depends on various factors such as the amount of alcohol consumed, the rate of gastric emptying, and the presence of food in the stomach. However, carbonated water and starchy foods may help slow down the absorption of alcohol by delaying the emptying of the stomach, which can result in a slower increase in blood alcohol concentration. Meat products may also help in slowing down the absorption of alcohol due to their high protein content, which can reduce the rate of gastric emptying. Plain water, on the other hand, may actually dilute the alcohol content in the stomach but will not speed up its absorption. It is important to note that while these substances may help to delay the absorption of alcohol, they do not reduce its effects on the body or prevent intoxication. The only effective way to reduce the effects of alcohol is to consume it in moderation or to avoid it altogether. It is also important to never drink and drive, and to seek medical attention if one experiences severe symptoms of alcohol consumption.
To learn more about alcohol click the link below
brainly.com/question/30829120
#SPJ4
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
What is the relationship of the two compounds in each of the following pairs? identical conformational isomers enantiomers diastereomers structural isomers identical conformational isomers enantiomers diastereomers structural isomers
It is important to note that terms "identical conformational isomers" and "enantiomers" are mutually exclusive, as identical conformational isomers have the same orientation of all atoms in space, while enantiomers have mirror-image orientation of all chiral atoms.
Identical conformational isomers: These are molecules that have same atomic connectivity but differ only in way their atoms are oriented in space. Enantiomers: These are mirror images of each other and are non-superimposable. They have the same chemical and physical properties, except for their interaction with plane-polarized light. Diastereomers: These are stereoisomers that are not mirror images of each other and have different physical and chemical properties. Structural isomers: These are molecules that have same molecular formula but differ in their atomic connectivity.
To know more about Enantiomers, here
brainly.com/question/21506956
#SPJ4
At the resting membrane potential, the membrane is most permeable to ________, which moves ________ the cell due to its A) chloride : into B) potassium : into C) sodium : out of D) sodium : into E) potassium : out of
At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell. Correct answer is option: E.
This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells. The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.
To know more about resting membrane, here
brainly.com/question/8438145
#SPJ4
a catalyzed mechanism for a naturally occuring reaction that destroys ozone is. which species is a catalyst
The reaction mechanism that destroys naturally occurring ozone is catalyzed by chlorine free radicals. Chlorine free radicals act as catalysts in this reaction.
What is the definition of a catalyst?A catalyst is a substance that increases the rate of a chemical reaction without being consumed in the reaction itself. The catalyst may be either a solid, a liquid, or a gas. It works by providing a different path for the reaction that requires less energy, thus making it easier for the reaction to occur.
The ozone layer is a naturally occurring layer of ozone gas in the Earth's stratosphere that absorbs harmful ultraviolet radiation from the sun. Chlorine free radicals are produced by the photodissociation of chlorofluorocarbons, which are present in the Earth's atmosphere. These radicals destroy the ozone layer by converting ozone molecules into oxygen molecules.
In summary, the catalyst for the naturally occurring reaction that destroys ozone is chlorine free radicals.
Full task:
Learn more about catalyst: https://brainly.com/question/631853
#SPJ11
Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C . Round your answer to 3 significant digits.
Root mean square (RMS) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴m/s.
The root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C can be calculated as follows:
Given data: Pressure, P = 0.17atm Temperature, T = -52°C = 221 K
Atomic weight of Neon, m = 20.18 g/mol = 20.18 × 10^-3 kg/molR = 8.314 J/mol KKB = R/NA = 1.38 × 10^-23 J/K (Boltzmann constant).
The root mean square (rms) velocity of gas is given by the equation:rms velocity, vrms = [3KB T/m]^1/2where, m = molar mass of gas, T = temperature, and KB = Boltzmann constant.
Substituting the given data, we get:v(rms) = [3KB T/m]^(1/2)v(rms) = [3KB T/m]^(1/2)v(rms) = [3 × (1.38 × 10^-23 J/K) × 221 K / (20.18 × 10^-3 kg/mol)]^(1/2)v(rms) = [4.981 × 10^-20 m^2/s^2]^(1/2) = 2.233 × 10⁻⁴ m/s.
Therefore, the RMS average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴ m/s (rounded off to 3 significant digits).
For more information about RMS average speed refer here
https://brainly.com/question/13095222?
#SPJ11
calculate the heat of reaction at constant pressure when 150 ml of 0.5 m hcl is mixed with 250 ml of 0.2 m baoh2
The heat of reaction at constant pressure when 150 ml of 0.5 M HCl is mixed with 250 ml of 0.2 M [tex]Ba(OH)_2[/tex] is -2.855 kJ/mol.
To calculate the heat of the reaction, first we have to write the balanced chemical equation for the reaction, followed by calculating the number of moles of the reactants involved. Then, we use the stoichiometric coefficients to find the limiting reactant and calculate the heat of the reaction. The balanced chemical equation for the reaction is:
HCl + [tex]Ba(OH)_2[/tex] → Ba[tex]Cl_2[/tex] + 2[tex]H_2O[/tex]
The reaction is an acid-base neutralization reaction. Therefore, we can use the following formula to calculate the heat of reaction:ΔH = q/m
where q is the heat absorbed or evolved during the reaction and m is the mass of the substance.
The heat of reaction at constant pressure can be calculated as follows:
First, calculate the number of moles of HCl and .Number of moles of HCl = Molarity × Volume of HCl = 0.5 × (150/1000) = 0.075 mol
Number of moles of [tex]Ba(OH)_2[/tex] = Molarity × Volume of [tex]Ba(OH)_2[/tex] = 0.2 × (250/1000) = 0.05 mol
Since the balanced chemical equation shows that HCl and [tex]Ba(OH)_2[/tex] react in a 1:1 ratio, the limiting reactant is[tex]Ba(OH)_2[/tex] .
Therefore, 0.05 moles of [tex]Ba(OH)_2[/tex] will react with 0.05 moles of HCl.
The molar enthalpy of neutralization of HCl is -57.1 kJ/mol.
Therefore, the heat of reaction is given by:
ΔH = n × ΔHmol= 0.05 × (-57.1)= -2.855 kJmol-1
The negative sign indicates that the reaction is exothermic.
Therefore, The heat of reaction at constant pressure when 150 ml of 0.5 M HCl is mixed with 250 ml of 0.2 M[tex]Ba(OH)_2[/tex] is -2.855 kJ/mol.
To know more about Pressure refer here :
https://brainly.com/question/28012687
#SPJ11
Of the following electron configurations of neutral atoms, which represents an atom in an excited state?A. 1s² 2s² 2p⁵B. 1s² 2s² 2p⁵ 3s²C. 1s² 2s² 2p⁶ 3s¹D. 1s² 2s² 2p⁶ 3s² 3p²E. 1s² 2s² 2p⁶ 3s² 3p⁵
Option C (1s² 2s² 2p⁶ 3s¹) represents an atom in an excited state. This is because an atom in an excited state has electrons in higher energy levels than the ground state. In option C, the outermost electron has the 3s orbital, which is a higher energy orbital than the 2p orbitals that are present in options A, B, and E. When an atom is in an excited state, it means that it has more energy than when it is in the ground state. This extra energy can be used to move electrons to higher energy orbitals, like the 3s orbital. Thus, option C is the only option that represents an atom in an excited state.
When electrons are in a higher energy orbital, they are more likely to undergo chemical reactions or to interact with light. In an excited state, the atom is more reactive and can interact with its environment in different ways than when it is in the ground state. This can be used for many applications, from analyzing spectra of different elements to providing information about a molecule's structure.
Know more about excited state here:
https://brainly.com/question/15413578
#SPJ11
In a given homologous series of hydrocarbons CnH2n, the boiling point generally increases as the size of the molecules increases. The best explanation for this statement is that in larger organic molecules A. more hydrogen bonding is possible B. the Van Der Waals forces between molecules is greater C. the number of covalent bonds per molecule is greater D. dipole forces between molecules are greater
The given homologous series of hydrocarbons CnH2n have the boiling point generally increasing as the size of the molecules increases. The best explanation for this statement is that in larger organic molecules, the Van Der Waals forces between molecules are greater. The correct answer is Option B.
What are hydrocarbons?Hydrocarbons are organic molecules that only contain hydrogen and carbon atoms. The structure of these molecules ranges from simple straight chains to complex branched chains and rings. The number of hydrogen atoms in a molecule increases by two as the number of carbon atoms increases by one. Hydrocarbons are used in a variety of industries, including gasoline, plastic, and synthetic rubber production. They are divided into two categories: aliphatic hydrocarbons and aromatic hydrocarbons.
What is meant by the term boiling point?The boiling point is the temperature at which a liquid turns into a gas or a vapor. It's the temperature at which the vapor pressure of a liquid equals atmospheric pressure. It's a physical property that reflects the strength of intermolecular forces. The boiling point of a substance is affected by the shape of its molecules, the type of intermolecular forces that occur between molecules, and external factors like pressure.
Learn more about Hydrocarbons here: https://brainly.com/question/29318707
#SPJ11
the division of the efferent nervous system that controls smooth and cardiac muscles and many glands is the ________ division.
The division of the efferent nervous system that controls smooth and cardiac muscles and many glands is the autonomic division.
The autonomic portion of the efferent nerve system regulates smooth and cardiac muscles as well as many glands. Involuntary body processes including breathing, digestion, and heart rate that are managed automatically without conscious effort are regulated by the autonomic nervous system (ANS). To keep the body's homeostasis, the sympathetic and parasympathetic divisions of the autonomic nervous system (ANS) cooperate. Although the parasympathetic division encourages "rest and digest" functions like relaxation and digestion, the sympathetic division triggers the "fight or flight" response, preparing the body for intense physical activity. Many medical diseases, including hypertension, arrhythmias, and digestive issues, can be brought on by autonomic nervous system dysfunction.
learn more about efferent nervous system here:
https://brainly.com/question/27994849
#SPJ4